Fits 2016-2018 Ford Focus (RS, ST, Titanium, S, SE, SEL, and Electric).

Engineered to reduce body roll and chassis sway, the Whiteline 22mm 2-point adjustable rear sway bar (BFR78Z) improves cornering grip and overall handling performance. By spreading lateral loads more evenly across the tires, this bar increases stability and reduces tire wear without compromising ride comfort or quality.

• 22mm solid spring steel construction for increased torsional stiffness.
• 2-point adjustability allows for fine-tuning of vehicle handling characteristics.
• Forged ends ensure maximum strength and durability at the sway bar link mounting points.
• High-grade synthetic elastomer bushings with PTFE lining eliminate the need for periodic lubrication.
• Internal bore knurling and grease retention lips for optimum bushing performance.
• DIY lateral locks prevent the sway bar from shifting or sliding under heavy cornering loads.
• Protective plating and powder coating for long-lasting corrosion resistance.

Each kit includes the sway bar, synthetic elastomer bushings, lateral locks, and necessary mounting hardware for a complete installation.

Fits 2015-2026 Ford Mustang models, including EcoBoost, GT, V6, Bullitt, Mach 1, Shelby GT350/GT350R/GT500, and Dark Horse.

Engineered to "Activate More Grip," the Whiteline BFR68Z rear sway bar is a critical suspension upgrade for the S550 and S650 chassis. By reducing body roll during cornering, this 25mm heavy-duty bar spreads lateral loads more evenly across the tire contact patches, increasing overall grip and improving handling predictability without sacrificing ride comfort.

This bar features a 3-point adjustable blade design, allowing drivers to fine-tune the rear roll stiffness to suit specific track conditions or street preferences. The tubular construction provides a significant weight advantage over solid bars without compromising rate. Each kit includes high-performance synthetic elastomer bushings featuring internal bore knurling and grease retention lips for consistent, quiet operation.

• Manufacturer Part Number: BFR68Z
• Diameter: 25mm
• Construction: Lightweight tubular alloy with forged ends for maximum strength
• Adjustability: 3-point multi-point adjustment for precision tuning
• Bushings: Oil, grease, and ozone-resistant synthetic elastomer
• Hardware: Includes DIY lateral locks to prevent bar shifting and moly-based grease
• Finish: Corrosion-resistant protective powder coating

Fits 2005-2014 Ford Mustang models, including Base, GT, Boss 302, Bullitt, and Shelby GT/GT500/GT500KR.

The Whiteline BFR65Z 27mm 4-point adjustable sway bar is engineered to reduce body roll and sway during high-speed cornering. By spreading lateral loads more evenly across the tires, this heavy-duty bar increases cornering grip and improves overall vehicle responsiveness. The multi-point adjustment allows drivers to fine-tune the handling characteristics to suit specific driving conditions or preferences without compromising ride comfort.

• 27mm Diameter: Heavy-duty alloy construction for increased rigidity and reduced flex compared to OE components.
• 4-Point Adjustability: Provides precise control over roll stiffness and vehicle balance.
• PTFE-Lined Bushings: Synthetic elastomer formulation with a low-friction PTFE lining eliminates the need for grease and resists ozone and weathering.
• Bore Knurling: Internal bushing design features knurling and grease retention lips for consistent performance.
• Corrosion Resistance: Dual-layer protection with protective plating and a tough powder-coated finish.
• Lateral Locks: Includes DIY lateral locks to prevent the sway bar from shifting sideways under heavy cornering loads.
• Manufacturer Part Number: BFR65Z

Fits 2016-2018 Ford Focus (RS, ST, S, SE, SEL, Titanium, and Electric). The Whiteline BFK009 Sway Bar Kit is a comprehensive "Activate More Grip" solution engineered to reduce body roll, improve turn-in response, and provide precise chassis balance. This kit features a 26mm 3-point adjustable front sway bar and a 22mm rear sway bar, allowing drivers to fine-tune the handling characteristics of their 2016-2018 Focus to suit specific driving conditions or track layouts.

Constructed with forged ends for maximum strength, these bars are paired with high-strength adjustable sway bar links. These links eliminate the flex found in factory components and allow for up to 25mm of on-car length adjustment to remove sway bar preload. The kit also includes DIY lateral locks to prevent shifting under heavy cornering loads and synthetic elastomer bushings with knurled internal bores for superior grease retention and friction management.

• Front Sway Bar: 26mm heavy-duty, 3-point adjustable.
• Rear Sway Bar: 22mm heavy-duty.
• Bushings: Oil and ozone-resistant synthetic elastomer with grease retention lips.
• Links: Heavy-duty adjustable alloy links with steel ball joint ends.
• Finish: Protective powder coating and plating for long-term corrosion resistance.
• Included: Front and rear bars, sway bar links, lateral locks, mounting hardware, and molybdenum disulphide (LM) grease.
• Part Number: BFK009

Fits 2016-2018 Ford Focus models, including RS, ST, Electric, and standard trims.

Designed to "Activate More Grip," the Whiteline BFF96Z front sway bar is a 26mm heavy-duty upgrade engineered to reduce body roll and improve cornering performance. By increasing roll stiffness, this bar spreads lateral loads more evenly across the tire contact patches, resulting in better handling and increased safety without compromising ride comfort. The 3-point adjustability allows you to fine-tune the vehicle's balance to suit your driving style or specific road conditions.

This sway bar is built for longevity and performance, featuring forged ends for maximum strength at the link mounting points. The bar is protected by a multi-stage finish including protective plating and powder coating to resist corrosion in harsh environments. The included bushings are made from a specialized synthetic elastomer with internal bore knurling and grease reservoirs for self-lubrication and friction management.

• 26mm heavy-duty spring steel for increased roll stiffness
• 3-point adjustability for precise handling calibration
• Forged ends ensure maximum strength at mounting points
• Synthetic elastomer bushings resistant to oil, grease, and ozone
• Internal grease reservoirs and knurling for quiet, smooth operation
• DIY lateral locks prevent bar shifting under heavy cornering loads
• Supplied with molybdenum disulphide (LM) grease and installation hardware
• Manufacturer Part Number: BFF96Z

Fits 2015-2026 Ford Mustang models including EcoBoost, GT, V6, Shelby GT350/GT500, Mach 1, Bullitt, and Dark Horse.

The Whiteline BFF95Z is engineered to 'Activate More Grip' by neutralizing body roll and stabilizing the chassis under lateral loads. This 35mm heavy-duty front sway bar spreads cornering forces more evenly across the tire contact patches, significantly improving front-end bite and overall handling precision without compromising daily ride comfort. Constructed with a 3-point blade adjustment system, this bar allows drivers to fine-tune the suspension balance to suit specific track conditions or street preferences.

• Tubular Construction: Hollow 35mm bar design offers significant weight savings over solid alternatives while maintaining high torsional stiffness.
• 3-Point Adjustability: Multi-point bolt holes allow for rapid adjustment of the effective lever arm length to increase or decrease roll stiffness.
• Forged Ends: Forged mounting points ensure maximum structural integrity and reliable performance at the sway bar link connection.
• Advanced Bushings: Includes synthetic elastomer bushings with internal bore knurling and grease retention lips for consistent lubrication and silent operation.
• Corrosion Protection: Finished with premium protective plating and powder coating to resist road salt, chemicals, and weathering.
• Lateral Locks: Includes DIY lateral locks to prevent the sway bar from shifting horizontally during high-G cornering.

Whiteline Part Number: BFF95Z

Fits 2005-2014 Ford Mustang models, including Base, GT, Boss 302, and Shelby GT500 variants.

The Whiteline BFF55Z 33mm front sway bar is engineered to reduce body roll and sway during cornering by spreading lateral loads more evenly across the tires. This increase in cornering grip significantly improves handling and steering response without compromising ride quality or comfort. The 4-point adjustable design allows drivers to fine-tune the vehicle's characteristics to suit specific driving preferences or track conditions.

• 33mm heavy-duty construction with forged ends for maximum strength at mounting points.
• 4-point adjustability for precise handling calibration and tuning.
• Synthetic elastomer bushings featuring internal bore knurling and grease retention lips for optimum lubrication.
• Protective powder coating and plating for superior corrosion resistance in harsh conditions.
• DIY lateral locks included to prevent sideways bar movement under heavy cornering loads.
• High-strength links with heavy-duty steel ball joint ends to eliminate flex and improve responsiveness.
• PTFE lining in bushings provides a low coefficient of friction, eliminating the need for periodic lubrication.
• Manufacturer Part Number: BFF55Z.

Fits 2016-2024 Chevrolet Camaro SS and 2020-2024 Chevrolet Camaro LT1.

The Whiteline BCR81Z 27mm heavy-duty rear sway bar is engineered to reduce body roll and maximize the tire contact patch during high-load cornering. By increasing roll stiffness, this sway bar distributes lateral loads more evenly across the tires, significantly improving grip, handling balance, and safety without compromising ride quality or daily comfort.

This kit features a 3-point blade adjustment system, allowing for precise fine-tuning of the vehicle's handling characteristics to suit specific driving conditions or driver preferences. The larger 27mm diameter offers significantly higher torsional resistance than the factory unit for flatter cornering.

• Diameter: 27mm heavy-duty solid spring steel
• Adjustment: 3-point multi-point blade adjustment
• Installation: Includes lateral locks to prevent sway bar walk and synthetic elastomer bushings
• MPN: BCR81Z
• Kit Includes: 1 Sway Bar, 2 Bushings, 2 Saddles, 2 Lateral Locks, and Grease

Vehicle Fitment

Fits select 2005-2023 Chrysler 300, Dodge Challenger, Charger, and Magnum models. This Whiteline 18mm heavy-duty rear sway bar is engineered to reduce body roll and spread lateral loads more evenly across the tires, providing increased cornering grip and improved vehicle stability without compromising ride quality.

Built to withstand harsh conditions, the bar features a tough protective powder coating to resist corrosion. It includes a 2-point adjustment system that allows drivers to fine-tune the handling characteristics to suit specific driving preferences or track conditions. The kit is supplied with high-grade synthetic elastomer mounts designed with internal bore knurling and grease retention lips for consistent lubrication and noise-free operation.

• Part Number: BCR15Z
• Diameter: 18mm heavy-duty spring steel construction
• Adjustment: 2-point multi-point adjustment for precision tuning
• Bushings: Synthetic elastomer formulation resistant to oil, grease, and ozone
• Lateral Locks: DIY lateral locks prevent sideways movement under cornering loads
• Hardware: Includes synthetic elastomer bushings and installation guide

Fits select 2005-2023 Chrysler 300, Dodge Challenger, Dodge Charger, and Dodge Magnum.

Engineered to improve cornering grip and chassis balance, the Whiteline BCF12Z sway bar is a critical upgrade for the Mopar LX and LC platforms. By increasing the front roll stiffness, this 32mm heavy-duty bar reduces body roll and spreads lateral loads more evenly across the tire contact patches. The 2-point adjustability allows drivers to fine-tune the handling characteristics to compensate for different spring rates, tire setups, or driving conditions without compromising ride quality.

This kit features forged ends for maximum strength at the link mounting points and is finished in a durable protective powder coating to resist corrosion. The included sway bar mounts utilize Whiteline's proprietary synthetic elastomer, designed with internal bore knurling and grease retention lips for consistent lubrication and silent operation. DIY lateral locks are also included to prevent the bar from shifting sideways under heavy cornering loads.

• Part Number: BCF12Z
• Bar Diameter: 32mm solid spring steel
• Adjustment: 2-point adjustable
• Bushings: Synthetic elastomer with internal grease reservoirs
• Finish: Heavy-duty powder coating
• Hardware: Includes lateral locks and molybdenum disulphide (LM) grease
• Installation: Detailed guide included for direct-fit replacement

Fits 2015-2021 BMW M2, M3, and M4 (including Competition, CS, and GTS models).

The Whiteline BBR44Z 26mm heavy-duty adjustable sway bar is engineered to reduce body roll and sway by more effectively distributing lateral loads across the tires. This increase in cornering grip improves handling precision and outright performance without sacrificing ride quality or comfort. The adjustable design allows you to fine-tune your vehicle's handling balance to suit specific driving conditions or track requirements, helping to maximize the tire contact patch during high-speed cornering.

• Diameter: 26mm solid spring steel construction
• Heavy-duty adjustable design for precise handling calibration
• Reduces body roll and improves lateral weight distribution
• Designed for long-term durability on both road and track
• Includes all necessary hardware for a direct installation
• Manufacturer Part Number: BBR44Z

Fits select 1991-2000 BMW 3 Series (318, 323, 325, 328) and M3 (BBR38Z).

Engineered to reduce body roll and maximize lateral grip, the Whiteline 22mm heavy-duty rear sway bar is a fundamental upgrade for improving cornering performance. By spreading lateral loads more evenly across the tires, this bar increases chassis rigidity and responsiveness during initial turn-in and high-speed lane changes. The 2-point adjustable design allows drivers to fine-tune handling characteristics to suit specific driving conditions or preferences without sacrificing ride comfort.

• Enhanced Rigidity: Replaces thin factory bars to eliminate flex and improve rear-end stability.
• Premium Bushings: Includes synthetic elastomer mounts with internal bore knurling and grease retention lips for optimum lubrication and noise-free operation.
• Corrosion Protection: High-strength steel construction finished with protective plating and powder coating to withstand harsh environments.
• Lateral Control: Supplied DIY lateral locks prevent the bar from shifting or sliding sideways under extreme cornering loads.
• Self-Lubricating: Internal grease reservoirs and supplied molybdenum disulphide (LM) grease ensure long-term friction management.

Technical Specifications:
Manufacturer Part Number: BBR38Z
Diameter: 22mm
Adjustment: 2-Point
Material: High-strength steel with synthetic elastomer bushings
Inclusions: Sway bar, bushings, lateral locks, molybdenum disulphide grease, and installation guide.

Fits 1999-2006 BMW 3 Series (E46) including 323i, 325i, 328i, 330i, and M3 models.

Whiteline's BBR11Z rear sway bar is engineered to "Activate More Grip" by significantly reducing body roll and spreading lateral loads more evenly across the tires. This 20mm, 2-point adjustable bar allows drivers to fine-tune vehicle handling characteristics to match driving conditions, improving turn-in response and cornering stability without compromising ride quality.

Built for durability and performance, this kit utilizes Whiteline’s advanced synthetic elastomer bushings. These bushings are resistant to oil, grease, ozone, and weathering, featuring internal bore knurling and grease retention lips for optimum lubrication. Every metal component is finished with a high-strength protective plating designed to withstand harsh road conditions and resist corrosion better than conventional paint.

• Diameter: 20mm
• Adjustment: 2-Point adjustable multi-hole design
• Material: High-quality spring steel with protective corrosion-resistant plating
• Bushings: Synthetic elastomer with internal grease reservoirs for self-lubrication
• Hardware: Includes DIY lateral locks to prevent sideways shifting and molybdenum disulphide (LM) grease
• Manufacturer Part Number: BBR11Z

Fits 2008-2013 BMW M3 and 2011 1 Series M.

The Whiteline BBF46 30mm fixed-position heavy-duty sway bar is engineered to reduce body roll and improve cornering performance by spreading lateral loads more evenly across your tires. By increasing the vehicle's overall roll stiffness, this bar provides sharper handling and increased safety without compromising ride comfort. The 30mm solid spring steel construction replaces the smaller OE unit to provide the torsional resistance required for spirited driving and track applications.

• Precision Engineering: 30mm fixed-position bar designed for maximum roll control and grip.
• Advanced Bushings: Synthetic elastomer mounts with internal bore knurling and grease retention lips for optimal lubrication and noise-free operation.
• Lateral Locks: Includes DIY lateral locks to prevent shifting or sideways movement under heavy cornering loads.
• Durable Finish: Protective powder coating provides a hard skin that resists corrosion, oil, and weathering.
• Self-Lubricating: Internal grease reservoirs provide continual lubrication for long-term friction management.
• Complete Kit: Supplied with extreme pressure molybdenum disulphide (LM) based grease and a detailed installation guide.
• MPN: BBF46

Fits 1999-2005 BMW 3 Series (E46) including 323i/Ci, 325i/Ci, 328i/Ci, and 330i/Ci models.

The Whiteline BBF45Z front sway bar is engineered to reduce body roll and improve cornering grip by more evenly distributing lateral loads across the contact patch. This 27mm 2-point adjustable bar allows drivers to fine-tune the handling balance of the E46 chassis, increasing steering precision and stability without compromising ride comfort or quality. The kit features high-quality synthetic elastomer bushings designed with internal bore knurling and grease retention lips to ensure consistent lubrication and silent operation.

• Diameter: 27mm solid spring steel with 2-point adjustability for custom roll stiffness.
• Protective powder coating for superior corrosion resistance and durability.
• Synthetic elastomer bushings resistant to oil, grease, ozone, and weathering.
• Included DIY lateral locks prevent the bar from shifting sideways under heavy cornering loads.
• Internal grease reservoirs and supplied molybdenum disulphide (LM) grease for extended service intervals.
• Part Number: BBF45Z
• Kit Includes: (1) Sway Bar, (2) Bushings, (2) Lateral Locks, and Installation Hardware.

Fits select 2015-2021 BMW M2, M3, and M4 models (F80/F82/F87), including Competition, CS, and GTS trims.

Engineered to reduce body roll and sharpen steering response, the Whiteline BBF44Z 30mm adjustable front sway bar is a critical upgrade for any performance-driven BMW. By increasing the front roll stiffness, this bar more effectively distributes lateral loads across the tires during high-speed cornering, maximizing the contact patch and improving overall grip levels.

This 30mm solid spring steel bar features multiple adjustment points, allowing drivers to fine-tune the vehicle's handling balance to suit specific track conditions or personal driving preferences. Whether you are looking to neutralize understeer or stabilize the chassis under hard turn-in, this kit provides a significant improvement over the factory component without compromising daily ride quality.

• 30mm diameter for increased torsional stiffness
• Adjustable design for precise chassis tuning
• Reduces body roll and improves lateral load distribution
• High-quality construction for long-term durability
• Manufacturer Part Number: BBF44Z

Fits select 2005-2013 BMW 1 Series (128i, 135i, 135is, 1 Series M) and 3 Series (325i, 328i, 330i, 335i, 335d) including RWD and xDrive models.

Engineered to reduce body roll and improve handling, the Whiteline BBF43 front sway bar spreads lateral loads more evenly across the tires during cornering. This 27mm fixed-position bar is designed to increase outright grip and steering precision without sacrificing ride comfort. By maintaining a flatter cornering attitude, it improves tire contact and reduces uneven wear.

• 27mm heavy-duty construction with protective powder coating for long-term corrosion resistance
• High-performance synthetic elastomer bushings resistant to oil, grease, ozone, and weathering
• Internal bore knurling and grease retention lips for optimal lubrication management
• DIY lateral locks prevent the sway bar from shifting sideways under heavy cornering loads
• Includes molybdenum disulphide (LM) based grease for extended component life
• Direct-fit replacement for the factory front sway bar
• Manufacturer Part Number: BBF43

Fits select 1991-2000 BMW 3 Series (E36) models, including 318i, 318is, 318ti, 323i, 323Ci, 323is, 325i, 325is, 325iX, 328i, 328Ci, 328is, and M3.

The Whiteline 27mm 3-point adjustable front sway bar is engineered to reduce body roll and sway by more evenly distributing lateral loads across the tires. This increase in cornering grip improves outright performance and handling responsiveness during initial turn-in and rapid lane changes. Designed as a bolt-on upgrade, this heavy-duty bar provides significant handling benefits without negatively affecting ride comfort.

• 3-point adjustability allows drivers to fine-tune vehicle balance to suit specific driving conditions or preferences.
• Manufactured from high-strength steel with a protective powder coating that resists corrosion and harsh environmental conditions.
• Includes synthetic elastomer bushings featuring internal bore knurling and grease retention lips for optimum lubrication.
• DIY lateral locks prevent sideways movement of the sway bar under high lateral loads.
• Supplied with extreme pressure molybdenum disulphide (LM) based grease and a detailed installation guide.
• Manufacturer Part Number: BBF39Z

Fits select 1991-2000 BMW 318i, 318is, 318ti, 323i/Ci/is, 325i/is/iX, 328i/Ci/is, and M3.

The Whiteline BBF38Z 27mm heavy-duty front sway bar is engineered to reduce body roll and distribute lateral loads more evenly across the contact patch, significantly increasing cornering grip. This 3-point adjustable bar allows you to fine-tune your suspension's handling characteristics to suit track conditions or personal driving style without sacrificing ride quality or comfort.

This kit features Whiteline's synthetic elastomer bushings, designed with internal bore knurling and grease retention lips for consistent lubrication and friction management. The bar is finished in a durable powder coating to resist corrosion, ozone, and weathering in harsh environments.

• Manufacturer Part Number: BBF38Z
• Diameter: 27mm
• Adjustability: 3-point multi-point adjustment
• Finish: Protective powder coating
• Bushings: Synthetic elastomer with internal grease reservoirs
• Includes: DIY lateral locks to prevent sideways movement
• Hardware: Extreme pressure molybdenum disulphide (LM) grease and installation guide included

Fits 1983-1993 BMW 3 Series models including 318i/is, 320i, 325/e/es/i/is/iX, and M3.

The Whiteline BBF36X front sway bar is engineered to reduce body roll and lateral sway by spreading cornering loads more evenly across the tires. This 24mm fixed-position, X-heavy duty bar increases cornering grip and improves overall handling balance without compromising ride quality. By minimizing the weight transfer during transitions, it provides more predictable chassis control for both street and performance driving.

Constructed with durability in mind, the bar features a protective powder coating that resists corrosion and weathering. It is supplied with high-performance synthetic elastomer bushings designed with internal bore knurling and grease retention lips for consistent lubrication and noise-free operation.

• Fixed 24mm X-heavy duty spring steel construction for increased torsional stiffness
• Synthetic elastomer bushings resist oil, grease, ozone, and weathering
• DIY lateral locks prevent sideways movement of the bar under heavy cornering loads
• Internal grease reservoirs and supplied molybdenum disulphide grease ensure long-term lubrication
• Protective powder coating for superior corrosion resistance
• Includes all necessary mounting hardware and detailed installation guide
• Manufacturer Part Number: BBF36X

Fits select 1999-2006 BMW 3 Series (E46) including 323Ci, 323i, 325Ci, 325i, 325xi, 328Ci, 328i, 330Ci, 330i, 330xi, and M3.

The Whiteline BBF15Z front sway bar is engineered to reduce body roll and lateral sway by spreading cornering loads more evenly across the tires. This increases front-end grip and improves overall handling performance without compromising ride comfort. Featuring a 30mm diameter and 3-point adjustability, this heavy-duty bar allows drivers to fine-tune the vehicle's balance to suit specific driving conditions or preferences.

Construction includes high-quality spring steel finished in a protective powder coating for superior corrosion resistance. The kit is supplied with Whiteline's advanced synthetic elastomer bushings, which are resistant to oil, grease, and ozone. These bushings feature internal bore knurling and grease retention lips to ensure the included molybdenum disulphide grease stays where it is needed for quiet, smooth operation.

• Part Type: Front Sway Bar
• Diameter: 30mm
• Adjustment: 3-Point adjustable
• Material: Heavy-duty spring steel with powder-coated finish
• Bushings: Synthetic elastomer with internal grease reservoirs
• Lateral Locks: Included DIY lateral locks prevent side-to-side shifting
• Hardware: Includes extreme pressure molybdenum disulphide (LM) grease and install guide
• Manufacturer Part Number: BBF15Z