The DV8 Offroad Elite Series D-Ring Shackles are engineered for heavy-duty vehicle recovery, offering an 8-ton working load limit (WLL) and a breaking strength exceeding 72,000 lbs. These shackles are forged from 1-1/16" thick steel to provide maximum durability during high-tension pulls. A key feature of the Elite Series is the 7/8" chromoly flush-mount pin, which sits level with the shackle body for a snag-free profile and a clean aesthetic. The pin is designed to be tightened or removed using a standard 3/8" ratchet or chuck.

To ensure a quiet ride on the trail or highway, each pair includes eight polyurethane isolators in two different thicknesses (1/8" and 3/16"). These allow you to fine-tune the fitment to your specific bumper mounts, effectively eliminating rattling and vibration. The shackles are finished in a heavy-duty red powder coat for superior corrosion resistance and visibility in off-road environments.

• 8-ton working load limit (WLL)
• 72,000lb+ breaking strength
• 1-1/16" thick forged steel construction
• 7/8" chromoly steel flush-design pin
• Fits industry-standard D-ring mounts
• Includes (4) 1/8" and (4) 3/16" anti-rattle isolators
• Requires 3/8" ratchet for pin installation and removal
• Sold as a pair
• Manufacturer Part Number: UNSK-01RD

Engineered for high-stress recovery, the DV8 Offroad Elite Series D-Ring Shackles (UNSK-01GR) provide a high-strength connection point for off-road use. These shackles are forged from 1-1/16-inch thick steel, delivering a massive 72,000 lb breaking strength and a certified 8-ton working load limit (WLL). This makes them an essential upgrade for heavy-duty recovery on the trail.

The 7/8-inch chromoly pin features a flush-mount design that sits even with the shackle body. This low-profile aesthetic also improves security, as the pin is recessed and requires a 3/8-inch ratchet or chuck to tighten or loosen. To prevent the common issue of metal-on-metal rattling during daily driving, each kit includes two sets of isolators in 1/8-inch and 3/16-inch thicknesses to ensure a snug fit against your bumper or shackle tabs.

• Forged 1-1/16" thick steel construction with heavy-duty gray powder coat
• High-strength 7/8" chromoly pin with flush-mount security design
• 8-ton working load limit (WLL) and 72,000+ lb breaking strength
• Designed for use with a standard 3/8" ratchet or drive tool
• Includes (4) 1/8" and (4) 3/16" anti-rattle isolators
• Manufacturer Part Number: UNSK-01GR

The DV8 Offroad Elite Series D-Ring Shackles (UNSK-01BL) are engineered for heavy-duty vehicle recovery, providing a secure connection point for the most demanding trail extractions. Forged from 1-1/16 inch thick steel, these shackles are rated for an 8-ton Working Load Limit (WLL) and a breaking strength exceeding 72,000 lbs. The heavy-duty black powder coat finish provides long-term corrosion resistance for external mounting.

These shackles feature a 7/8-inch chromoly pin designed to fit industry-standard D-ring mounts. Unlike traditional shackles, the Elite Series utilizes a flush pin design that sits level with the shackle body for a cleaner look and improved clearance. Installation and removal are handled via a standard 3/8-inch ratchet or chuck. To eliminate annoying trail chatter, each pair includes eight isolators in two different thicknesses (1/8-inch and 3/16-inch) to ensure a snug, rattle-free fit against your bumper.

• Working Load Limit (WLL): 8 Tons
• Breaking Strength: 72,000 lbs+
• Material: 1-1/16" thick forged steel body
• Hardware: 7/8" chromoly steel flush-mount pin
• Tool Requirement: 3/8" ratchet or chuck
• Finish: Heavy-duty black powder coat
• Included Accessories: (4) 1/8" isolators and (4) 3/16" isolators
• Manufacturer Part Number: UNSK-01BL

Fits 2021-2026 Ford Bronco.

Upgrading to an aftermarket off-road bumper often leaves the factory crash bars exposed, resulting in an unfinished look at the front of your rig. The DV8 Offroad LBBR-07 Crash Bar Caps provide a clean, professional solution by capping the open ends of the steel bars while adding functional mounting points for auxiliary lighting or equipment.

Constructed from durable steel and finished in a micro-texture black powder coat, these caps are built to withstand trail debris and harsh environments. The integrated accessory mounts are designed to host up to 3-inch light pods, rock lights, RGB accent lighting, or action cameras. Designed for a straightforward bolt-on installation, these caps maintain clearance for tire sizes up to 35 inches.

• Replaces unsightly open crash bar ends with a finished steel cap
• Integrated mounting point for lights or action cameras
• Supports up to 3-inch light pods or standard rock lights
• Durable micro-texture black powder coat finish
• Simple bolt-on installation to factory points
• Engineered for clearance with up to 35-inch tires
• Manufacturer Part Number: LBBR-07