Fits 2018-2025 Jeep Wrangler JL models including Sport, Sahara, Rubicon, 4xe, and 392.

The Rugged Ridge Arcus Rear Bumper (11549.17) provides a high-clearance, stamped-steel solution for off-road recovery and protection. Constructed from a high-strength 11-gauge steel shell with a fine-textured satin black powder coat, this bumper is engineered for durability on the trail. Its patented design features massive 1-inch thick recovery hooks that are dual cross-drilled to accept both 3/4-inch and 7/8-inch D-rings.

Integrated jack lifting points are recessed on both sides of the bumper, allowing for direct frame access when using an off-road jack. This bumper balances a bold, stubby profile with functional utility for serious off-road enthusiasts.

• Construction: Stamped 11-gauge steel shell
• Finish: Fine-textured satin black powder coat
• Recovery Points: 1-inch thick hooks, dual-drilled for 3/4-inch and 7/8-inch D-rings
• Lifting Points: Integrated off-road jack recesses for direct frame access
• Warranty: Limited 5-Year Warranty
• Manufacturer Part Number: 11549.17

Fits 2007-2018 Jeep Wrangler JK and Wrangler Unlimited models (Rubicon, Sahara, Sport, and X trims).

The Rugged Ridge Arcus Stubby Front Bumper is engineered for off-road recovery and structural durability. This patented design features a high-strength 11-gauge steel shell built around a heavy-duty 1/4-inch thick steel winch plate. The internal winch tray is rated for most winch models up to a 12,500-lb capacity, ensuring reliable recovery performance in demanding conditions.

Equipped with massive 1-inch thick recovery hooks, the Arcus provides versatile attachment points. Each hook is dual cross-drilled to accept both 7/8-inch and 3/4-inch D-rings. For field maintenance and recovery, the bumper includes integrated recesses that allow for direct frame access when using a hi-lift jack. The design also features built-in fog light pockets that accept factory OE fog light assemblies for a seamless installation.

• Material: 11-gauge steel shell with 1/4-inch steel winch plate
• Finish: Satin black textured powder coat
• Winch Compatibility: Rated up to 12,500 lbs
• Recovery Points: Dual-drilled 1-inch thick hooks for 3/4" and 7/8" D-rings
• Lighting: Integrated OE fog light mounting pockets
• Lifting Points: Built-in hi-lift jack recesses
• Manufacturer Part Number: 11549.11

Fits select 2018-2025 Jeep Wrangler and 2021 Jeep Gladiator models.

The Rugged Ridge Arcus Front Bumper features a bold, stubby profile designed to provide maximum tire clearance and improved approach angles for technical off-roading. This complete set includes a high-strength tubular overrider that adds critical protection for your grille and radiator while providing a dedicated mounting point for trail cameras or auxiliary off-road lighting.

Expertly crafted from stamped 11-gauge steel, the Arcus bumper achieves a high-strength design without the weight of traditional plate bumpers. It comes equipped with a heavy-duty 1/4-inch thick steel winch tray ready for recovery operations. The entire assembly is finished in a durable satin black powder coat to provide superior resistance against rust, corrosion, and trail debris.

• Patented design made from high-strength stamped 11-gauge steel
• Stubby profile provides excellent clearance for oversized tires
• Includes heavy-duty 1/4-inch thick steel winch tray
• Tubular overrider offers grille protection and accessory mounting
• Finished in a durable satin black powder coat
• Direct bolt-on installation with included hardware
• Manufacturer Part Number: 11549.05

Fits select 2018-2025 Jeep Wrangler JL models including Rubicon, Sahara, Sport, Willys, and 4xe variants.

The Rugged Ridge Arcus Front Bumper Overrider provides a functional and aggressive accent for vehicles equipped with the Arcus Front Bumper (MPN 11549.01). Beyond its rugged aesthetics, this overrider offers essential protection for the grille and radiator while serving as a secure mounting point for off-road lighting or trail cameras. Engineered for the demands of the trail, it features a low-profile, sloped design that complements the Arcus series' styling.

• Manufactured from high-strength 2.5-inch diameter tube steel for maximum durability
• Satin black powder coat finish provides superior resistance to rust and corrosion
• Simple bolt-on installation utilizing included hardware
• Designed specifically to integrate with Arcus Front Bumper (11549.01)
• Manufacturer Part Number: 11549.03

Fits all 2007-2018 Jeep Wrangler JK and JK Unlimited models, including Rubicon, Sahara, Sport, and X submodels.

The Rugged Ridge Spartan Series Front Bumper (MPN 11548.01) provides Jeep enthusiasts with a classic off-road aesthetic in a lightweight, high-strength package. This one-piece front bumper features ultra-aggressive high clearance ends (HCE) that are angled to match the profile of factory fender flares, ensuring a clean, symmetrical look with maximum tire clearance. Each bumper is constructed from high-strength plate steel using a fold-and-weld process for superior structural integrity and a precise fit.

Designed as a direct bolt-on replacement, the Spartan bumper incorporates a stand-alone winch plate that serves as the central backbone of the assembly. It comes equipped with a tubular overrider bar and heavy-duty D-shackle mounts to complete your recovery setup. For added convenience, this bumper is designed to reuse the factory JK fog lights, maintaining OE functionality while providing a rugged textured black powder coat finish that resists rust and corrosion.

• One-piece high-strength plate steel construction
• Textured black powder coat finish for corrosion resistance
• High clearance bumper ends for improved approach angles
• Integrated winch plate and D-shackle mounts (D-rings not included)
• Includes stylized tubular overrider bar
• Direct bolt-on installation using factory mounting points
• Compatible with factory Jeep JK fog lights
• Manufacturer Part Number: 11548.01
• Backed by a 5-year limited warranty

Fits 1976-2006 Jeep CJ5, CJ7, Scrambler, and Wrangler (YJ and TJ) models. This Rugged Ridge XHD Modular Rear Bumper Tire Carrier (MPN: 11546.42) is engineered as a direct bolt-on addition for the Xtreme Heavy Duty rear bumper system. Designed for the trail, this carrier allows you to move the weight of an oversized spare off the tailgate and onto the chassis-mounted bumper.

• Fits up to a 35-inch tire diameter
• Standard 5x4.5 inch wheel bolt pattern
• Modular design for seamless integration with XHD rear bumpers
• Durable textured black powder coat finish for corrosion resistance
• Heavy-duty latch mechanism ensures a secure, rattle-free fitment
• Direct bolt-on installation with included hardware

Whether you are running an 81 Jeep Scrambler or a 2006 Wrangler Rubicon, this tire carrier provides the structural integrity needed to support larger wheel and tire combinations without stressing your factory hinges.

Fits select 2007-2018 Jeep Wrangler and Wrangler JK models including Rubicon, Sahara, Sport, and Unlimited.

Upgrading to oversized tires often causes the spare to block the factory center high-mount stop light (CHMSL). The Rugged Ridge Third Brake Light Extension Kit solves this clearance issue by elevating the factory light assembly. This adjustable spacer allows your third brake light to be clearly seen over tires ranging from 33 inches up to 42 inches in diameter while retaining the use of your factory spare tire carrier.

Manufactured from heavy-duty steel, this extension kit is finished in a durable black powder coat to resist corrosion and trail wear. To maximize utility, Rugged Ridge integrated an off-road antenna mount into the design, providing a secure mounting point for CB or trail antennas. This kit is a direct-fit solution that uses your existing factory light housing for a straightforward installation.

• Adjustable height to clear 33-inch to 42-inch tires
• Compatible with factory spare tire carrier
• Includes integrated off-road antenna mount
• Retains the original factory third brake light
• Heavy-duty steel construction with black powder-coated finish
• Manufacturer Part Number: 11546.23

Fits 1976-2006 Jeep CJ5, CJ7, Scrambler, and Wrangler (YJ/TJ/LJ).

The Rugged Ridge XHD Rear Bumper System provides a heavy-duty recovery and protection solution for Jeep owners who demand off-road durability. This modular bumper is constructed from high-strength steel with a textured black powder-coated finish for superior corrosion resistance. It features a specialized inner mounting plate that creates an extremely secure mounting point, reinforced specifically for the rigors of trail use and recovery operations.

The versatile two-piece design allows the bumper to be used as a standalone unit or paired with a tire carrier capable of supporting up to a 35-inch spare tire. For those requiring towing capabilities, this bumper is designed to accept the optional receiver hitch (part number 11580.03).

• Heavy-duty steel construction with textured black finish
• Two reinforced D-ring attachment points for recovery straps and shackles
• Modular design compatible with optional tire carrier and receiver hitch
• Direct fitment to factory mounting points for streamlined installation
• Manufacturer Part Number: 11546.10

Fits select 2018-2025 Jeep Wrangler (JL) and Gladiator (JT) models.

The Rugged Ridge Spartacus Front Bumper (MPN 11544.21) provides a high-strength, off-road protection solution without the excessive weight associated with traditional plate steel bumpers. Engineered from sturdy 11-gauge stamped steel, this bumper uses a specialized manufacturing process to create a lighter structure that maintains structural rigidity and advanced styling.

• 11-gauge stamped steel construction for high strength-to-weight ratio
• Durable satin black powder-coated finish resists corrosion and trail wear
• Engineered to accommodate most popular winch models (Winch plate sold separately)
• Maintains use of factory tow hooks for recovery points
• Weight-conscious design reduces front-end sag compared to heavy aftermarket bumpers
• Includes US Patent Nos. D760,133, D775,013, D800,036, and D776,582

Designed as a direct-fit upgrade, the Spartacus series offers the clearance needed for technical terrain while providing a clean, factory-plus aesthetic that complements the modern Jeep platform. This package includes the bumper only.

Fits 2007-2018 Jeep Wrangler and Wrangler JK (2-door and 4-door models including Rubicon, Sahara, Sport, and X).

The Rugged Ridge Spartacus Front Bumper utilizes a specialized stamping process to provide a high-strength steel upgrade without the excessive weight of traditional heavy-plate aftermarket bumpers. Constructed from 11-gauge stamped steel, this bumper features an aggressive profile and a durable textured black powder-coated finish designed to resist corrosion and trail wear. The stamping technology allows for complex styling cues that complement the factory Jeep body lines while maintaining structural integrity.

This bumper is engineered for versatility, accommodating most popular winch models. It is designed to reuse factory tow hooks for simplified installation and recovery capability. Please note that for winch mounting, the Rugged Ridge Winch Plate (MPN 11541.13) is required and sold separately.

• Manufacturer Part Number: 11544.01
• Material: 11-Gauge Stamped Steel
• Finish: Textured Black Powder Coat
• Installation: Reuses factory tow hooks
• Weight: Lighter than traditional steel plate bumpers
• Patents: US Patent No. D760,133, D775,013, D800,036, D776,582

Fits select 2018-2025 Jeep Wrangler JL and Gladiator JT models equipped with factory Rubicon steel bumpers or Rugged Ridge Spartacus front bumpers.

The Rugged Ridge Winch Mount Plate (MPN 11543.16) provides a heavy-duty, secure foundation for adding recovery capabilities to your Jeep. Engineered for a precision fit, this mounting plate is designed to handle winches with a capacity of up to 12,500 lbs. The high-strength, all-steel construction ensures an unwavering mounting point for most major brands of aftermarket winches during high-stress recovery situations.

Each plate is finished with a durable black powder coating to resist corrosion and withstand the rigors of off-road use. This complete kit includes all necessary brackets and hardware for a straightforward installation on compatible bumper systems.

• Fits factory Rubicon steel bumpers and Rugged Ridge Spartacus front bumpers
• Constructed from high-strength steel for maximum durability
• Compatible with winch capacities up to 12,500 lbs.
• Durable black powder-coated finish for long-term corrosion resistance
• Includes mounting plate, brackets, hardware, and instructions
• Manufacturer Part Number: 11543.16

Fits select 2007-2025 Jeep Wrangler and 2020-2025 Jeep Gladiator models.

The Rugged Ridge All Terrain Modular Bumper System is engineered to provide a high level of functionality and durability for off-road enthusiasts. Modeled after the proven XHD Modular Bumper System, this bumper is constructed from heavy-duty steel with a durable black powder-coated finish to resist corrosion and trail debris. Its modular design allows owners to customize the setup for specific recovery and styling requirements.

Designed as a versatile platform, this bumper can be enhanced with various bolt-on accessories to match your build's needs. Whether you are navigating tight technical trails or setting up for heavy-duty recovery, the All Terrain system provides a solid foundation for your front-end protection.

• Constructed from durable black powder-coated steel for maximum longevity
• Modular design allows for custom configurations with optional strikers and ends
• Compatible with All Terrain Double X Striker and removable Winch Plate Cover (sold separately)
• Accommodates optional Over-Rider and Stubby Ends to complete the modular look
• Precision-engineered for Jeep Wrangler (JK/JL) and Gladiator (JT) frames
• Manufacturer Part Number: 11543.01

Fits 2018-2025 Jeep Wrangler JK and JL models (including Sport, Sahara, Rubicon, Willys, and 4xe).

Purpose-built for extreme off-road duty, the Rugged Ridge XOR Series Rear Bumper (11541.22) delivers superior protection without sacrificing street functionality. The foundation of the XOR series is its high-strength 5mm-thick steel plate construction, providing the structural rigidity needed for heavy recovery and trail impacts. The narrow profile and arched ends improve departure angles, while integrated jack lifting points and massive 1-inch thick recovery shackle mounts ensure you are prepared for any recovery scenario.

This bumper is engineered for seamless integration with factory equipment, featuring built-in proximity sensor ports and maintaining full compatibility with the original trailer hitch. Installation is straightforward, utilizing factory mounting points with no cutting or drilling required.

• High-strength 5mm-thick steel plate construction for maximum rigidity
• Massive 1-inch thick recovery shackle mounts
• Integrated jack lifting points for off-road utility
• Pre-drilled proximity sensor ports for factory sensor compatibility
• Maintains use of factory trailer hitch
• Direct-fit, no-drill installation
• Limited 5-Year Warranty
• Manufacturer Part Number: 11541.22

Fits select 2007-2025 Jeep Wrangler JK, JL, 4xe, and 2020-2025 Jeep Gladiator JT models.

The Rugged Ridge XOR Series Stubby Front Bumper is engineered for extreme off-road duty, providing a high-clearance profile that maximizes approach angles on technical trails. Constructed from 5mm-thick steel plate, this bumper offers superior structural rigidity to handle the stresses of recovery and winching. It features an integrated top-mount winch plate and massive 1-inch thick shackle mounts designed to accommodate 3/4-inch D-rings. The recessed fog light pockets allow you to retain your factory lighting, though they are not compatible with Altitude or LED-style OE fog lights.

Designed as a direct bolt-on upgrade, this bumper requires no drilling or cutting for installation and includes all necessary mounting hardware. Whether you're navigating rock gardens or overland trails, the XOR Series provides a rugged, functional foundation for your Jeep's front-end protection.

• Manufacturer Part Number: 11541.19
• Construction: High-strength 5mm-thick steel plate
• Recovery: 1-inch thick shackle mounts (shackles not included)
• Winch Compatibility: Integrated top-mount winch plate
• Installation: Direct bolt-on; no drilling or cutting required
• Compatibility: Accepts standard OE fog lights (Excludes Altitude/LED models)
• Warranty: Limited 5-year manufacturer warranty

Fits select 2007-2025 Jeep Wrangler JK and JL models (including Rubicon, Sahara, Sport, and Willys).

Add a layer of front-end protection and aggressive styling to your off-road rig with the Rugged Ridge HD Over-Rider Bar. Designed as a direct bolt-on accent for Rugged Ridge HD Stubby or Full Width front bumpers, this over-rider provides essential protection for your radiator and grille during trail rides without impeding access to your winch or recovery gear.

Built from heavy-duty 2-inch OD tubular steel, the bar is finished in a durable satin black powder coat to resist corrosion and trail debris. The design features concealed mounting hardware, giving the component a seamless, integrated look that appears to be part of the bumper’s original structure.

• Replaces or accents Rugged Ridge HD series front bumpers
• Constructed from high-strength 2-inch OD tubular steel
• Durable satin black powder coat finish for superior corrosion resistance
• Concealed mounting hardware for a clean, professional appearance
• Bolt-on installation requires no cutting or welding
• Manufacturer Part Number: 11540.62

Fits select 2007-2025 Jeep Wrangler JK and JL models including Rubicon, Sahara, Sport, and 4xe trim levels.

The Rugged Ridge HD X-Striker allows you to upgrade your HD front bumper with an aggressive, trail-ready profile. Engineered as a direct bolt-on addition for Rugged Ridge HD Stubby or Full-Width Front Bumpers, this overrider hoop provides a distinct styling accent without the need for welding or major modifications. The design features fully-welded seams and hidden mounting hardware to ensure a clean, integrated appearance once installed.

Constructed from heavy-duty 2-inch OD tubular steel, the X-Striker is finished in a durable satin black powder coat to resist corrosion and trail debris. It offers a rugged styling statement that installs in minutes using common hand tools.

• Fits Rugged Ridge HD series stubby and full-width front bumpers
• Sturdy 2-inch OD tubular steel construction for maximum durability
• Fully-welded seams and concealed hardware for a seamless look
• Tough satin black powder coat finish provides superior corrosion resistance
• Simple bolt-on installation with included hardware
• Manufacturer Part Number: 11540.61
• Limited 5-Year Warranty

Fits 1976-2006 Jeep CJ5, CJ7, Scrambler, and Wrangler models. The Rugged Ridge XHD (Extra Heavy Duty) front bumper system offers a modular approach to vehicle protection, allowing you to customize your Jeep's front-end utility and style. This comprehensive kit features a winch-ready bumper base, a protective overrider hoop, and standard bumper ends for a complete, aggressive look.

Constructed from heavy-duty 4mm thick steel, this bumper is designed to withstand the rigors of off-road recovery and trail obstacles. The textured black powder-coated finish provides long-lasting corrosion resistance and hides minor scuffs. The bumper base includes integrated cutouts for factory-style fog lights and heavy-duty D-ring attachment points for recovery operations.

• Modular design allows for future component changes or upgrades
• Heavy-duty 4mm steel construction for maximum durability
• Textured black powder-coated finish for superior corrosion protection
• Includes front winch bumper base, overrider hoop, standard ends, and D-rings
• Equipped with factory fog light cutouts
• Manufacturer Part Number: 11540.57
• U.S. Patent Nos. 7,703,834; 8,393,656; 8,764,080

Fits 2018-2025 Jeep Wrangler JL and Wrangler Unlimited models across all trims including Sport, Sahara, Rubicon, Willys, and 4xe.

Replace vulnerable factory plastic with the trail-proven strength of the Rugged Ridge HD Series Rear Bumper. Engineered to handle technical terrain and recovery scenarios, this bumper provides a significant upgrade in durability and utility for any Jeep Wrangler JL. The heavy-duty steel construction is finished in a resilient satin black powder coat to resist corrosion and trail debris.

This rear bumper is purpose-built for functionality, featuring massive recovery hooks that are dual-drilled to accommodate both 3/4-inch and 7/8-inch shackles. For maintenance or emergency tire changes on the trail, the design includes integrated jack lifting points at the corners for secure placement of farm-style jacks. This bumper is designed to integrate seamlessly with the HD Series front bumpers for a complete off-road package.

• Heavy-duty steel construction for superior impact protection
• Durable satin black powder coat finish
• Integrated jack lifting points for high-lift jacks
• Massive recovery hooks dual-drilled for 3/4" and 7/8" D-rings
• Manufacturer Part Number: 11540.36
• Limited 5-Year Warranty

Fits select 2007-2025 Jeep Wrangler JK, Wrangler JL, and Gladiator JT models. Replace flimsy factory plastic with the trail-proven strength of the Rugged Ridge HD Series Stubby Front Bumper. Engineered for the off-road enthusiast who prioritizes approach angles and tire clearance, this high-strength steel bumper provides an aggressive profile without sacrificing essential recovery utility.

This HD Series bumper features a built-in recessed winch plate, positioning your winch lower to maximize airflow to the radiator—critical during low-speed crawling. For recovery operations, the bumper is equipped with massive dual-drilled hooks that accommodate both 3/4-inch and 7/8-inch D-ring shackles. Integrated jack lifting points at every corner ensure a stable location for high-lift jacks during trail repairs or maintenance.

• High-strength steel construction with a durable satin black powder coat finish
• Stubby design maximizes tire clearance and improves approach angles for technical obstacles
• Recessed winch plate maintains cooling efficiency and lowers the center of gravity
• Massive recovery hooks dual-drilled for 3/4-inch and 7/8-inch shackles
• Integrated lifting points at every corner for high-lift jacks
• Manufacturer Part Number: 11540.32
• Backed by a Limited 5-Year Warranty

Fits select 2007-2026 Jeep Wrangler JK, JL, and Gladiator JT models.

Upgrade your vehicle's front-end protection by replacing factory plastic with the trail-proven strength of the Rugged Ridge HD Series Full-Width Front Bumper. Engineered for the rigors of off-road use, this bumper is constructed from high-strength steel and finished in a durable satin black powder coat to resist corrosion and trail debris. The full-width profile ensures maximum coverage for your front tires and fenders.

This bumper is designed with recovery and versatility in mind. It features a built-in recessed winch plate that accommodates most aftermarket winches while positioning them lower to maximize airflow to the radiator. For recovery situations, the bumper includes massive hooks dual-drilled to accept both 3/4-inch and 7/8-inch shackles, along with integrated jack lifting points at every corner for secure maintenance and recovery.

• High-strength steel construction for maximum durability
• Satin black powder coat finish provides superior corrosion resistance
• Recessed winch plate improves radiator airflow and cooling efficiency
• Dual-drilled recovery hooks compatible with 3/4-inch and 7/8-inch shackles
• Integrated lifting points for off-road jacks
• Manufacturer Part Number: 11540.31
• Limited 5-Year Warranty included

Fits select 1997-2018 Jeep Wrangler and Wrangler JK models equipped with XHD modular bumpers.

Add reliable recovery points to your off-road setup with the Rugged Ridge XHD Bumper D-shackle brackets. These heavy-duty steel brackets are specifically designed to bolt onto the XHD modular bumper base, providing a secure mount for standard D-shackles. Whether you are navigating technical trails or assisting in a recovery, these brackets ensure your bumper is ready for the task.

Each set is finished in a durable textured black powder coat to match the Rugged Ridge XHD series and resist corrosion in harsh environments. The kit includes all necessary mounting hardware for a straightforward installation. Please note that D-shackles are sold separately (recommended part number 11235.01).

• Manufacturer Part Number: 11540.27
• Material: Heavy-duty steel
• Finish: Textured black powder coat
• Placement: Mounts to XHD modular bumper base
• Included: Pair of brackets and installation hardware
• Warranty: Limited 5-year manufacturer warranty

Fits select 1976-2018 Jeep CJ5, CJ7, Scrambler, and Wrangler (including JK) models.

The Rugged Ridge XHD Overrider Hoop is a core component of the XHD modular bumper system, allowing you to customize your front-end protection and styling. Built from heavy-duty 2.3-inch diameter steel tubing, this hoop provides an aggressive off-road profile and serves as a functional barrier against trail obstacles. Each unit is treated with a corrosion-resistant E-coat undercoating before receiving a durable textured black powder-coated finish designed to withstand years of heavy-duty use.

This modular overrider (MPN 11540.14) is designed for a direct bolt-on installation to any Rugged Ridge XHD front bumper. It utilizes factory-style mounting points for a secure fit without the need for cutting or welding. Whether you are restoring a classic CJ or upgrading a modern JK Wrangler, this hoop provides the oversized look and rugged performance required for serious off-roading.

• Tube Diameter: 2.3 inches
• Material: Steel
• Finish: Textured Black Powder Coat over E-coat
• Compatibility: Designed for Rugged Ridge XHD Front Bumpers
• Installation: Direct Bolt-on
• Warranty: Limited 5-Year Warranty
• Manufacturer Part Number: 11540.14

Fits 1997-2018 Jeep Wrangler and Wrangler JK models equipped with 3-inch diameter tube bumpers.

Restore the finished look of your vehicle's exterior with the Rugged Ridge 3-inch round plastic tube bumper end cap. This component is designed as a direct replacement for missing or damaged caps on most 3-inch tubular bumpers. It features a precise friction-fit design that allows for a simple press-in installation without the need for additional hardware or adhesives.

• Design: Round end cap for 3-inch diameter tubular bumpers
• Material: Durable black plastic construction
• Installation: Simple press-fit design; no tools required
• Compatibility: Fits most aftermarket 3-inch tube bumpers
• Quantity: Sold individually
• Manufacturer Part Number: 11525.01
• Warranty: Limited 5-year manufacturer warranty

Fits 1955-2006 Jeep Willys (CJ-3/CJ-5/CJ-6), CJ3, CJ5, CJ6, CJ7, Scrambler, and Wrangler models.

The Rugged Ridge 3-Inch Rear Tube Bumper delivers a classic off-road aesthetic with the durability of corrosion-resistant stainless steel. Built to withstand trail debris and the elements, this bumper features 3-inch diameter tubing with fully welded end caps to prevent internal moisture buildup and ensure a clean, finished look. The center section is specifically designed to provide clearance for oversized spare tires, making it an ideal upgrade for modified Jeeps.

Engineered for a precise fit, this rear bumper utilizes a direct bolt-on installation method that mounts to factory locations, requiring no drilling or permanent vehicle modification. Whether you are restoring a vintage CJ-5 or refreshing a TJ Wrangler, this stainless steel assembly provides a rugged, aggressive profile and reliable rear-end protection.

• Constructed from durable 3-inch stainless steel tubing
• Fully welded end caps for maximum longevity and a seamless appearance
• Clearance-optimized design accommodates oversized spare tires
• Easy bolt-on installation requires no drilling
• Limited 5-year manufacturer warranty
• Manufacturer Part Number: 11522.01

Fits 2015-2021 Jeep Renegade (Latitude, Limited, Sport, Trailhawk, Upland, and special editions).

The Rugged Ridge Grille Guard is engineered for 2015-2021 Jeep Renegade owners who require dependable front-end protection without sacrificing the vehicle's unique styling. This guard provides a physical barrier for your front bumper and headlights, shielding them from brush and debris during off-road excursions or daily driving. Built from high-quality materials with high-strength steel mounting brackets, it features a durable satin black powder-coated finish that offers superior resistance to rust and corrosion.

• Protects factory front bumper and headlights from impact and debris
• Durable high-strength steel mounting brackets for a secure fit
• Satin black powder-coated finish for long-term corrosion resistance
• Includes all necessary installation brackets, hardware, and instructions
• Manufacturer Part Number: 11513.04
• Limited 5-Year Warranty