Fits 1990-2005 Mazda Miata (Base, LS, M Edition, Mazdaspeed, and SE).

Replace soft, worn-out rubber factory bushings with the Energy Suspension Hyper-Flex polyurethane rear control arm bushing set. Engineered for the enthusiast, these bushings eliminate the excessive deflection found in OE rubber components, ensuring your Miata maintains precise suspension geometry and alignment during aggressive cornering or high-load conditions.

The full-floating, non-binding design allows the control arms to pivot smoothly through their intended range of motion, providing a more responsive feel without the harshness often associated with rigid metal bearings. This set is ideal for street, track, or autocross use where consistency and durability are critical. The black polyurethane material is formulated to resist road salt, oils, and environmental contaminants that typically degrade rubber.

• Replaces stock rear control arm bushings to improve handling and cornering control
• Constructed from Energy's proprietary Hyper-Flex performance polyurethane
• Maintains better wheel alignment under extreme driving conditions
• Full-floating and non-binding design for efficient suspension operation
• Manufacturer Part Number: 11.3106G

Fits 1990-2005 Mazda Miata models including Base, 10th Anniversary, LE, LS, M Edition, Mazdaspeed, SE, Shinsen, and STO.

Standard rubber bushings are often the weak link in a Miata's suspension, prone to cracking and excessive deflection that compromises steering precision. This Energy Suspension Hyper-Flex polyurethane bushing set (11.3105R) replaces soft factory units to restore handling consistency and maintain proper alignment under high cornering loads. Engineered for durability on both the street and the track, these red polyurethane bushings provide a more direct connection to the road without the binding associated with worn rubber.

• Precision Handling: Improves vehicle response and cornering control by reducing unwanted control arm movement.
• Hyper-Flex Polyurethane: Proprietary material outlasts factory rubber and resists degradation from road salt, oils, and environmental factors.
• Full Floating Design: Provides smoother, non-binding operation for more efficient suspension travel.
• Direct Fit: Designed to install into the remaining stock front control arms.
• Color: Performance Red finish.
• Manufacturer Part Number: 11.3105R

Fits 1986-1991 Mazda RX-7 (including Turbo, GXL, GTU, and Convertible models).

Restore the handling precision of your FC-chassis RX-7 with the Energy Suspension Hyper-Flex Rear Control Arm Bushing Set. Over time, original equipment rubber bushings become soft, rot, and deflect under cornering loads, leading to unpredictable alignment changes and vague steering response. These performance polyurethane replacements are engineered to maintain proper suspension geometry even under extreme street or track conditions.

Constructed from Energy Suspension's proprietary Hyper-Flex polyurethane, these bushings are designed to be full-floating and non-binding. This allows the rear control arms to pivot smoothly through their intended range of motion without the friction or deflection common in worn factory components. This set is a direct fit for your remaining stock control arms and provides a significant upgrade in cornering stability and overall vehicle control.

• Part Number: 11.3103G
• Material: Hyper-Flex Performance Polyurethane
• Finish: Black
• Configuration: Full floating and non-binding design
• Maintains precise wheel alignment under load
• Resistant to vehicle fluids and road grime
• Outlasts and outperforms traditional rubber bushings

Fits select 1979-1985 Mazda RX-7 and 1979-1982 Mazda 626 models. This Energy Suspension Hyper-Flex polyurethane bushing set replaces soft, worn-out factory rubber to restore steering precision and maintain proper wheel alignment under aggressive cornering or heavy braking.

Constructed from Energy’s proprietary performance polyurethane, these bushings are designed to outlast traditional rubber components while providing a more stable mounting point for the front lower control arms. The full-floating, non-binding design ensures smooth suspension travel and improved feedback through the steering wheel. This kit is a critical upgrade for enthusiasts looking to sharpen the handling of their classic Mazda on the street or track.

• Maintains better alignment during hard cornering and braking
• Hyper-Flex polyurethane construction outlasts and outperforms standard rubber
• Full-floating design prevents binding for smoother suspension operation
• Black finish for a discrete, factory-style appearance
• Requires the reuse of existing factory outer metal shells
• Manufacturer Part Number: 11.3101G

Fits 2006-2014 Mazda MX-5 Miata across all trim levels including Base, Club, Sport, and Grand Touring.

The Energy Suspension Hyper-Flex Master Bushing Set (11.18104R) replaces compliant factory rubber bushings with high-performance polyurethane to restore and improve chassis dynamics. Unlike OEM rubber that softens and cracks over time, Energy's proprietary Hyper-Flex material is engineered to withstand UV exposure, road salt, and undercar fluids like oils and coolants. This set is designed to outlast traditional rubber 5-to-1 while providing a cost-effective performance upgrade.

By significantly reducing bushing deflection, this kit helps maintain precise caster and camber alignment during high-load cornering and hard braking. The result is a more communicative steering feel, reduced wheel hop under quick acceleration, and improved overall suspension stability on the street or the track.

• Manufacturer Part Number: 11.18104R
• Material: Hyper-Flex Polyurethane
• Color: Red
• Maintains proper caster and camber alignment under load
• Increases handling precision and steering control
• Greatly reduces wheel hop on quick acceleration
• Resistant to oils, coolants, and atmospheric pollutants
• Proudly Made in America

Fits 1990-2005 Mazda Miata (Base, LS, Mazdaspeed, SE, and special editions).

Replace compliant factory rubber with the Energy Suspension Hyper-Flex Master Bushing Set to restore and enhance your Miata's handling precision. Engineered from high-performance polyurethane, these bushings provide the stiffness required to maintain proper caster and camber alignment during hard cornering and braking while remaining durable enough for daily street use. Unlike OEM rubber, this Hyper-Flex material is impervious to undercar chemicals like oil and coolant and will not deteriorate from UV exposure or atmospheric pollutants.

By significantly reducing deflection in the suspension pivot points, this kit helps eliminate wheel hop during quick acceleration and provides a more stable, predictable platform for both street and track driving. This comprehensive set is a cost-effective alternative to individual bushing replacement and is designed to outlast traditional rubber components by a 5-to-1 margin.

• Improved Control: Maintains alignment settings for consistent handling and better tire contact.
• High-Durability Material: Hyper-Flex performance polyurethane resists compression set and environmental rot.
• Reduced Wheel Hop: Increases traction by stabilizing the rear suspension under load.
• Braking Stability: Minimizes suspension geometry changes for more even, controlled stops.
• Made in America: Proudly manufactured in the USA.
• Manufacturer Part Number: 11.18102R

Fits 1963-1980 MG MGB Base, GT, and MK IV models.

Restore the handling and ride stability of your classic MG with this Energy Suspension Rear Leaf Spring Pad Set. These polyurethane components replace the original, prone-to-failure rubber pads that often crush or rot over time. By providing a more durable interface between the leaf spring and the axle, these pads eliminate unwanted movement and maintain proper alignment for long-term performance.

• Replaces soft or deteriorated factory rubber leaf spring pads
• High-density polyurethane construction resists road oils and environmental chemicals
• Maintains consistent suspension geometry for better handling
• Ideal for both chassis restoration and performance maintenance
• Set includes black polyurethane pads
• Manufacturer Part Number: 10.6102G

Fits 1963-1980 MG MGB (Base, GT, and MK IV).

Upgrade your classic MG's front suspension with the Energy Suspension Hyper-Flex Front Control Arm Bushing Set. These bushings are engineered to replace soft, original equipment rubber that degrades over time, leading to vague steering and alignment shifts. Made from Energy's proprietary Hyper-Flex polyurethane, this set maintains precise alignment geometry under heavy cornering and braking loads, providing a more connected and responsive driving experience.

The full-floating, non-binding design ensures smooth suspension travel without the friction often associated with standard bushings. These polyurethane components are resistant to oils, road salts, and environmental factors that typically destroy factory rubber parts.

• Improves vehicle handling, cornering response, and overall steering control
• Replaces worn OE bushings in the original control arms
• Maintains critical alignment settings during aggressive driving
• Full-floating design for smooth, efficient suspension operation
• Durable Hyper-Flex polyurethane outlasts and outperforms standard rubber
• Manufacturer Part Number: 10.3102G

Fits 1963-1980 MG MGB (Base, GT, and MK IV).

Restore suspension geometry and improve handling response in your classic MG MGB with this Energy Suspension Hyper-Flex rear leaf spring bushing set. Factory rubber bushings are susceptible to rot, cracking, and compression set over time, which leads to excessive leaf spring movement and unpredictable handling. These polyurethane replacements are engineered to maintain their shape and physical properties far longer than standard rubber.

• Material: High-density Hyper-Flex polyurethane for maximum durability.
• Longevity: Formulated to last 5 to 10 times longer than conventional OE rubber components.
• Control: Reduces suspension deflection to maintain control during aggressive cornering, acceleration, and braking.
• Finish: Black polyurethane.
• Installation: Designed to replace worn factory bushings for a precise fit.
• Manufacturer Part Number: 10.2101G

Fits 1986-1995 Suzuki Samurai (Base, JA, JL, JS, JX, and JX SE).

Improve the handling and chassis control of your Suzuki Samurai with the Energy Suspension Hyper-Flex polyurethane sway bar bushing set. Factory rubber bushings are prone to drying out and cracking, leading to excessive deflection and reduced sway bar effectiveness. This 23mm bushing set replaces those soft OE components with high-performance polyurethane, allowing your existing sway bar system to operate at maximum efficiency.

Energy Suspension's proprietary Hyper-Flex material is engineered for longevity and resistance to road contaminants, oils, and environmental degradation that typically destroy rubber. This set provides a more responsive steering feel and flatter cornering without the high cost of a full sway bar replacement. It is designed for a precise fit on the 23mm bar, mounting directly to the factory locations.

• Material: Hyper-Flex Polyurethane
• Bushing Diameter: 23mm
• Color: Red
• Durability: Resists oil, grease, and atmospheric rot
• Application: Replaces worn OE sway bar bushings
• Manufacturer Part Number: 1.5101R

Fits 1986-1995 Suzuki Samurai (Base, JA, JL, JS, JX, JX SE).

Upgrade your vehicle's suspension performance and longevity with the Energy Suspension Hyper-Flex leaf spring bushing set. Designed to replace worn OEM rubber components, these bushings provide the necessary rigidity to maintain proper suspension geometry during cornering, hard braking, and acceleration. This kit addresses the common issue of rubber bushings rotting or distorting over time, which leads to loose handling and unpredictable steering response.

Constructed from Energy Suspension's proprietary Hyper-Flex polyurethane, these bushings are engineered to last 5 to 10 times longer than conventional rubber. The material is highly resistant to common road contaminants, oils, and chemicals that typically degrade factory components. This set ensures your Samurai remains in control whether you are navigating technical off-road trails or street driving.

• Product Line: Hyper-Flex
• Material: Performance Polyurethane
• Color: Red
• Replaces prone-to-fail factory rubber bushings
• Maintains alignment for improved handling and control
• Manufacturer Part Number: 1.2102R

Fits 1986-1995 Suzuki Samurai models including Base, JA, JL, JS, JX, and JX SE submodels.

Restore handling precision and eliminate suspension slop with the Energy Suspension Hyper-Flex leaf spring bushing set. Factory rubber bushings are prone to drying out, cracking, and excessive deflection under load, which leads to unpredictable axle wrap and poor steering response. This aftermarket bushing set is engineered to maintain proper spring alignment and suspension geometry during cornering, braking, and acceleration.

Constructed from Energy's proprietary Hyper-Flex polyurethane, these bushings are significantly more durable than original equipment rubber. They are formulated to resist degradation from road salt, oils, and environmental factors, ensuring your suspension remains tight and controlled through various terrains.

• Replaces soft or deteriorated factory leaf spring bushings
• Made from proprietary Hyper-Flex performance polyurethane
• Engineered to last 5 to 10 times longer than conventional rubber components
• Improves vehicle control during maneuvers and over uneven surfaces
• Color: Black finish
• Manufacturer Part Number: 1.2102G

Fits 1986-1995 Suzuki Samurai (Base, JA, JL, JS, JX, JX SE).

Restore suspension geometry and improve chassis response with the Energy Suspension 1.2101R leaf spring bushing set. These bushings are engineered to replace soft, worn-out OEM rubber components with Energy's proprietary Hyper-Flex polyurethane. This upgrade provides a dramatic increase in performance and durability, ensuring your vehicle stays in control during sharp turns, heavy braking, and off-road articulation.

Hyper-Flex polyurethane is designed to withstand the harsh conditions of the undercar environment, lasting 5 to 10 times longer than conventional rubber. By reducing unwanted deflection in the spring eyes, these bushings help the suspension function properly and maintain alignment settings under load.

• Material: Energy's Hyper-Flex performance polyurethane
• Compatibility: Replaces factory O.E.M. leaf spring bushings
• Durability: Resistant to oils, road salt, and environmental contaminants
• Performance: Improves stability during cornering and acceleration
• Part Number: 1.2101R
• Color: Red

Fits 1986-1995 Suzuki Samurai (Base, JA, JL, JS, JX, JX SE).

Replace worn factory rubber with Energy Suspension’s Hyper-Flex polyurethane leaf spring bushings to restore handling precision and durability. Unlike standard OE rubber that softens and cracks over time, these polyurethane bushings maintain their shape and integrity, ensuring your suspension functions properly during cornering, braking, and off-road articulation. This kit is designed to provide more consistent control and a longer service life than conventional rubber components.

• Manufactured from Energy Suspension’s proprietary Hyper-Flex polyurethane
• Lasts 5 to 10 times longer than traditional rubber bushings
• Resistant to degradation from road oils, chemicals, and ozone
• Improves steering response and maintains proper spring alignment
• Includes bushings for a complete OE-style replacement
• Manufacturer Part Number: 1.2101G

Fits Subaru BRZ, Scion FR-S, and Toyota 86 models.

The Cusco Shift Lever Retainer Bushing (965 936 A) is designed to eliminate the vague, spongy feel of the factory shifter assembly. By replacing the soft OEM rubber bushing with this high-performance alternative, you significantly reduce shift lever deflection and play. This upgrade provides a crisper, more mechanical engagement, ensuring greater precision during spirited driving and track use.

• Direct replacement for the soft factory rubber retainer bushing
• Reduces shifter play and improves tactile feedback
• Enhances gear engagement precision and consistency
• Constructed for long-term durability under high-stress conditions
• Manufacturer Part Number: 965 936 A

Fits Subaru BRZ, Scion FR-S, and Toyota 86 models.

The Cusco Steering Rack Bushing Special Service Tool (SST) is a purpose-built implement designed to simplify the maintenance and upgrade of your vehicle's steering system. When replacing factory bushings, using this specific tool ensures proper alignment and prevents damage to the steering rack housing during the removal and installation process.

• Manufacturer Part Number: 965 935 SST
• Function: Facilitates the precise removal and installation of steering rack bushings
• Compatibility: Designed specifically for Subaru BRZ, Scion FR-S, and Toyota 86 steering racks
• Build Quality: Heavy-duty construction for reliable, repeatable use in shop or track environments

Fits 2013+ Subaru BRZ, Scion FR-S, and Toyota 86.

The Cusco Steering Rack Bushing is engineered to replace the soft, compliant factory rubber units that often lead to a vague or "mushy" steering feel. By utilizing a more rigid material, this bushing set significantly reduces steering rack movement and deflection within the chassis mounts. This ensures that driver steering inputs are translated directly to the front wheels with minimal delay, providing a sharper, more precise front-end feel and increased tactile feedback through the steering wheel.

• Improves steering response and overall precision
• Reduces lateral steering rack movement under high cornering loads
• Direct-fit replacement for the factory rubber bushings
• Essential upgrade for track use or spirited street driving
• Manufacturer Part Number: 965 935 A

Fits 2022 Subaru BRZ and 2022 Toyota GR86.

The Cusco Steering Rack Reinforcing Stay (6C1 026 A) is engineered to increase the rigidity of the steering rack mounting points. On the ZN8 and ZD8 chassis, high-load cornering can cause the factory steering rack mounts to flex, resulting in a vague or disconnected steering feel. This reinforcing stay bridges the mounting points to minimize deflection and ensure more direct feedback from the front tires to the driver.

• Improves steering response and tactile precision
• Reduces steering rack movement under aggressive cornering loads
• Constructed from high-strength steel for maximum structural integrity
• Finished in signature Cusco Blue coating for long-term corrosion resistance
• Manufacturer Part Number: 6C1 026 A

Fits 2008-2014 Subaru Impreza WRX and WRX STI (including Limited, Premium, and Special Edition models).

The Cusco Power Steering Rack Brace (692 026 ALHD) is a precision-engineered chassis reinforcement designed to eliminate unwanted steering rack movement. By stiffening the mounting connection between the steering rack and the subframe, this brace ensures that steering inputs are translated directly to the wheels, removing the vagueness and delay caused by component flex under load.

This modification is essential for 2008-2014 Subaru Impreza owners seeking improved steering feedback and sharper directional stability during aggressive driving. It is constructed to exacting tolerances, ensuring a secure fit on the factory mounting points without the need for extensive modification.

• Reduces steering rack deflection for increased steering precision
• Enhances tactile feedback through the steering wheel
• Direct bolt-on installation to factory mounting points
• Compatible with GRB, GVB, GH, and GE chassis codes
• Manufacturer Part Number: 692 026 ALHD

Fits 2021+ Toyota GR Yaris (1.6L AWD).

The Cusco Rear Differential Rigid Mount Collar is engineered to eliminate the excessive movement and deflection found in the factory rear differential bushings. By sandwiching the original rubber mounts with precision-machined aluminum collars, this kit creates a more rigid connection between the differential and the subframe. This results in more direct power transfer to the ground, improved throttle response, and a more connected feel during aggressive acceleration and cornering.

• Location: Rear Side of the Rear Differential
• Material: High-strength machined aluminum
• Finish: Signature Cusco Blue Anodizing
• Reduces driveline slop and movement under high-torque loads
• Retains factory bushings while increasing mounting rigidity
• Direct bolt-on installation
• Manufacturer Part Number: 1C7 928 B

Fits 2021+ Toyota GR Yaris (1.6L AWD).

The Cusco Rear Differential Rigid Mount Collar is designed to suppress unwanted movement of the rear differential carrier by reinforcing the factory rubber bushings. These precision-machined aluminum collars sandwich the OEM mounts to minimize deflection under heavy acceleration and high-load cornering, resulting in more direct power transfer and improved throttle response. By eliminating the "slop" inherent in factory rubber mounts, these collars provide a more connected feel through the drivetrain without requiring a full bushing replacement.

• Reduces rear differential movement for sharper drivetrain engagement
• CNC-machined aluminum construction for high strength and precision fit
• Blue anodized finish for corrosion resistance and long-term durability
• Installs on the front side of the rear differential carrier
• Designed for bolt-on installation with factory hardware

• Manufacturer Part Number: 1C7 928 A
• Location: Rear Differential (Front Side)
• Finish: Anodized Blue

Fits select 1999-2020 Chevrolet and GMC 1500/2500 trucks and SUVs, including Silverado, Sierra, Tahoe, Yukon, and Suburban. This service kit is specifically designed for Cognito Upper Control Arms (UCAs) to restore suspension performance and eliminate play or noise caused by worn components.

High-durometer polyurethane bushings provide superior resistance to deflection compared to standard rubber, maintaining proper alignment geometry during suspension travel. The included crush sleeves are precision-machined to ensure a perfect fit within the control arm pivots. This complete kit provides enough hardware to service one pair of control arms, refreshing the pivot points to provide the steering response and chassis stability Cognito is known for.

• Manufacturer Part Number: 199-91162
• Material: Polyurethane bushings and steel crush sleeves
• Quantity: (8) Bushings and (4) Crush Sleeves
• Application: Designed exclusively for use with Cognito Upper Control Arms
• Installation: Services two (2) control arms

Fits 2011-2019 Chevrolet Silverado and GMC Sierra 2500 HD/3500 HD 2WD/4WD trucks.

The Cognito 199-91161 Bushing Kit is a dedicated service solution for older Cognito Upper Control Arms (UCAs) designed with greaseable pivot bushings. Over time and through heavy-duty use, suspension bushings can experience wear that impacts alignment and handling. This kit allows you to refresh your existing Cognito UCAs, restoring the tight tolerances and quiet operation required for heavy-duty towing and off-road performance.

• Designed specifically for Cognito UCAs with greaseable pivot points
• Durable construction to withstand the high loads of 2500 HD and 3500 HD applications
• Restores suspension feel and eliminates play caused by worn bushings
• Complete service kit for both upper control arms
• Manufacturer Part Number: 199-91161

Fits all 2015-2024 Ford Mustang models, including EcoBoost, GT, V6, Shelby GT350/GT500, Mach 1, and Dark Horse.

Eliminate subframe movement and improve launch consistency with the BMR Suspension Rear Cradle Centering Sleeve Kit (SCB766). On the S550 and S650 platforms, the factory subframe mounting holes are significantly larger than the bolts, which allows the rear cradle to shift under load. This misalignment often results in wheel hop, unpredictable handling, and slower 60-foot times during hard launches.

These CNC-machined centering sleeves are designed to take up the void between the subframe mounting bolts and the cradle, locking the assembly in a fixed position. This kit is an essential upgrade for any street performance, drag racing, or road course application where rear-end stability is critical.

• Reduces rear subframe deflection and wheel hop
• Ensures precise cradle alignment for consistent handling
• Designed for high-performance street, drag, and handling use
• CNC-machined construction with a durable black finish
• Includes four centering sleeves
• Manufacturer Part Number: SCB766

Fits 2008-2018 Dodge Challenger models.

The BMR Suspension SCB112 Rear Cradle Bushing Kit is engineered to eliminate the subframe movement common in high-performance applications. By replacing the compliant factory rubber bushings with CNC-machined 6061-T6 billet aluminum, this kit provides a solid mounting point for the rear cradle. This drastic reduction in deflection helps eliminate wheel hop, improves traction during hard launches, and ensures more consistent handling characteristics under load.

Built for durability and precision, these bushings feature a black anodized finish for superior corrosion resistance. This kit is a direct replacement for the OEM bushings and is designed to handle the increased stress of drag racing and aggressive street driving without the failure points associated with rubber or polyurethane.

• Precision CNC-machined from 6061-T6 billet aluminum
• Durable black anodized finish for corrosion protection
• Eliminates rear cradle movement and subframe deflection
• Reduces wheel hop for improved 60-foot times and traction
• Direct replacement for factory rubber bushings
• Manufacturer Part Number: SCB112

Fits 2024 Ford Mustang Dark Horse, EcoBoost, and GT models.

Minimize wheel hop and stabilize the rear suspension of your S650 Mustang with the BMR Suspension Rear Lower Control Arm Spherical Bearing Kit. While factory rubber bushings are designed to prioritize NVH (Noise, Vibration, and Harshness) reduction, they allow significant deflection under load, leading to inconsistent handling and wheel hop. This kit replaces those soft OE components with heavy-duty 1-inch spherical bearings housed in precision-machined cups, ensuring that power is transferred to the pavement rather than absorbed by the bushing.

Built for high-performance driving and track use, the CBK774 kit utilizes CNC-machined billet aluminum spacers to ensure a perfect fit within the factory lower control arms. The included bearings are industry-standard for durability, featuring a massive load rating to handle the stresses of hard launches and high-G cornering.

• Eliminates rear lower control arm bushing deflection
• Reduces wheel hop and improves rear-end stability
• Heavy-duty 1-inch spherical bearings with 1.5-inch center ball diameter
• 82,800-pound static load rating
• Machined bearing cups and CNC-machined billet aluminum spacers
• Press-in installation into factory lower control arms
• Manufacturer Part Number: CBK774

Fits 1997-2013 Chevrolet Corvette C5 and C6 models, including Base, Z06, ZR1, Grand Sport, and 427.

Upgrade your suspension's precision with the BMR Suspension CBK550 Delrin Front and Rear Control Arm Bushing Kit. This kit is engineered to replace soft factory rubber bushings, eliminating the compliance and deflection that compromise handling during aggressive cornering or high-speed maneuvers. By maintaining consistent suspension geometry, these bushings significantly reduce wheel hop and improve overall steering feedback and vehicle stability.

The kit features internally-fluted Delrin bushings that are greaseable for quiet operation and a long service life. Combined with precision-machined 6061-aluminum inner sleeves, this setup provides a rigid foundation for your Corvette's upper and lower control arms, ensuring the suspension reacts to the road rather than bushing compression.

• Replaces factory upper and lower control arm bushings in both front and rear locations
• Eliminates control arm bushing deflection for improved suspension control and predictability
• Internally-fluted Delrin bushings for superior grease retention
• CNC-machined 6061-aluminum inner sleeves for high strength and precise fitment
• Includes front (CBK551) and rear (CBK552) control arm Delrin bushing kits
• Estimated installation time: 5-6 hours
• Manufacturer Part Number: CBK550

Fits 2008-2018 Dodge Challenger.

Eliminate rear-end deflection and wheel hop with the BMR Rear Lower Delrin Control Arm Bushing Kit. The factory rubber bushings are designed for comfort, which allows for significant movement under load, leading to inconsistent launches and reduced traction. This BMR kit replaces those compliant OE components with precision-machined Delrin, a high-tensile material known for its low friction and extreme rigidity.

By installing these bushings, you lock down the rear lower control arms to maintain precise suspension geometry during hard acceleration and cornering. This is an essential upgrade for Challenger owners looking to improve 60-foot times and overall chassis response without the harshness of solid metal bearings.

• Direct replacement for soft factory rubber bushings
• Precision-machined from high-strength Delrin (acetyl resin)
• Significantly reduces wheel hop and improves launch consistency
• Low-friction material ensures smooth suspension articulation
• Durable black finish
• Manufacturer Part Number: CBK112

Fits 2015-2020 Ford Mustang EcoBoost, GT, V6, Bullitt, and Shelby GT350/GT350R/GT500 models.

Minimize wheel hop and enhance rear-end stability by eliminating factory rubber bushing deflection. The BMR Suspension Rear Lower Control Arm Spherical Bearing Kit (BK081) replaces the compliant OEM bushings with heavy-duty 1-inch spherical bearings. This design ensures that suspension energy is transferred directly to the tires rather than being absorbed by soft rubber, providing more consistent handling and improved traction during aggressive driving.

The kit features precision-machined bearing cups that press into the factory lower control arms and are secured with CNC-machined billet aluminum spacers. The included 1-inch spherical bearings are an industry standard for durability, featuring an impressive load rating and a center ball diameter designed to withstand the stresses of both street and track use.

• Eliminates rear lower control arm bushing deflection for improved power transfer
• Reduces wheel hop and enhances overall rear-axle stability
• Heavy-duty 1-inch spherical bearings with 82,800-lb load rating
• 1.5-inch center ball diameter for maximum durability
• CNC-machined billet aluminum spacers and machined bearing cups
• Silver Zinc finish for corrosion resistance
• Manufacturer Part Number: BK081

Fits 2015-2019 Cadillac CTS-V and 2016-2024 Chevrolet Camaro (LS, LT, LT1, SS, and ZL1).

Improve steering precision and eliminate suspension geometry changes in your 6th Gen Camaro or 3rd Gen Cadillac CTS-V with the BMR Suspension Front Radius Rod Spherical Bearing Kit (BK070). Factory bushings are constructed from soft rubber designed to prioritize NVH reduction, but they often deflect under heavy braking and cornering loads. This deflection leads to inconsistent steering feel and unpredictable handling during spirited driving or track sessions.

The BMR BK070 kit replaces these compliant OE bushings with heavy-duty spherical bearings. By removing the play inherent in rubber components, this kit ensures the front radius rods maintain their intended alignment, providing sharper turn-in and superior feedback for street performance, drag racing, and road course applications.

• Replaces soft factory rubber bushings to eliminate deflection
• Improves steering feel, response, and overall handling predictability
• Designed for high-performance street, track, and drag racing use
• Durable black finish
• Manufacturer Part Number: BK070