Fits 2015-2020 Ford F-150 models equipped with the 2.7L or 3.5L EcoBoost engine.

The MBRP Armor Plus Series cat-back exhaust system is engineered to improve the performance and sound profile of your F-150. Constructed from 3-inch mandrel-bent T409 stainless steel tubing, this system maximizes exhaust flow by eliminating the rippling and restrictions found in factory crushed-bent pipes. The result is a more efficient engine that delivers increased horsepower, improved torque, and sharper throttle response while maintaining lower exhaust gas temperatures (EGTs).

This single-side exit system provides a mellow, authoritative exhaust note that stands out without being overbearing. Designed for a straightforward installation, it utilizes the factory OEM hanger locations and features a complete bolt-on design that requires no welding. The Armor Plus Series offers a balance of value and durability, utilizing T409 stainless steel which is resistant to penetrating rust while being easier to maintain than aluminized steel.

• 3-inch mandrel-bent T409 stainless steel tubing for maximum flow
• Mellow, performance-oriented exhaust note
• Significant gains in horsepower and torque
• Direct bolt-on installation using OEM hangers
• Includes stainless steel exhaust tips
• Corrosion-resistant construction (Armor Plus Series)
• Manufacturer Part Number: S5253409

Fits 2011-2014 Ford F-150 models (3.5L).

The MBRP Armor Lite Series exhaust system provides a high-flow, 4-inch solution designed to reduce backpressure and improve the exhaust note of your EcoBoost engine. Constructed from heavy-gauge aluminized steel, this cat-back system is an ideal choice for vehicles operating in dry climates, offering significant durability against road debris and dings. The single-side exit design maintains a clean look while delivering the signature MBRP mellow tone.

Every pipe in this system is mandrel-bent to ensure a consistent diameter through every curve. This process eliminates the rippling and restrictions found in factory crush-bent tubing, allowing for higher exhaust gas velocity and improved throttle response. This bolt-on kit is engineered for a straightforward installation using common hand tools and factory mounting points.

• 4-inch mandrel-bent aluminized steel tubing for maximum flow
• Armor Lite Series (P Series) construction for heavy-duty value
• Fully sealed tubing helps resist internal rust and corrosion
• Single-side exit configuration
• Direct bolt-on installation requires no specialized tools
• Delivers a rich, mellow exhaust note
• Reduces backpressure for improved engine efficiency
• 1-year manufacturer warranty (P/PLM series)

Fits 2011-2014 Ford F-150 (3.5L).

The MBRP Armor Lite Series provides a high-flow exhaust solution for owners looking to improve performance and sound without the cost of premium alloys. This 4-inch cat-back system is engineered from heavy-gauge aluminized steel, making it an ideal choice for vehicles in dry climates where corrosion resistance is less critical than physical durability. The system features mandrel-bent tubing to ensure smooth, unrestricted exhaust flow, which helps lower exhaust gas temperatures (EGTs) and sharpen throttle response.

Every Armor Lite system is designed for a precise fit, utilizing factory hanger locations for a straightforward bolt-on installation. This single-side exit system delivers a rich, mellow exhaust note that stands out without being overbearing. It comes complete with a polished stainless steel tip to finish the look of your truck.

• 4-inch mandrel-bent aluminized steel tubing
• Single side exit configuration
• Fully sealed tubing to resist dings and debris damage
• Direct bolt-on installation using OEM hangers
• Polished stainless steel exhaust tip included
• Improved exhaust flow for better throttle response
• 3-year manufacturer warranty

Fits select 2011-2014 Ford F-150 models (3.5L).

The MBRP ARMOR PLUS Series cat-back exhaust system is engineered to improve exhaust flow and reduce backpressure for your 3.5L EcoBoost engine. Constructed from corrosion-resistant T409 stainless steel, this 4-inch system offers a balance of durability and value, designed specifically to resist penetrating rust. The mandrel-bent tubing ensures consistent diameters through every curve, maximizing airflow to help lower exhaust gas temperatures and improve throttle response.

Designed for a straightforward installation, this single-side exit system utilizes your truck's factory hanger locations and features a complete bolt-on design. The ARMOR PLUS series delivers a mellow, professional exhaust note that provides a distinct presence without being overbearing for daily driving. Each kit includes a polished stainless steel tip to complete the look.

• Series: ARMOR PLUS
• Material: T409 Stainless Steel
• Tubing Diameter: 4-inch
• Exit Configuration: Single Side
• Installation: Bolt-on, utilizes OEM hangers
• Included: Polished stainless steel exhaust tip
• Warranty: Limited Lifetime Warranty

Fits 2017-2026 Ford F-250 and F-350 Super Duty Crew Cab models equipped with the 6.2L or 7.3L gas engines.

Upgrade your Super Duty’s presence and performance with the MBRP ARMOR BLK Series cat-back exhaust system. This system is engineered for truck owners in drier climates who want a specific aesthetic without sacrificing flow. The main body is constructed from heavy-gauge aluminized steel with a mill finish, while the high-visibility tailpipe and tips receive a high-heat black powder coating for a sleek, aggressive look. Every inch of tubing is mandrel-bent to maintain consistent diameters through every curve, reducing backpressure and helping your 6.2L or 7.3L engine breathe more efficiently.

Designed for a straightforward installation, this system utilizes your Ford's factory hanger locations and includes all necessary hardware. You get a refined, mellow exhaust note that announces your arrival without overwhelming the cabin during long hauls. The ARMOR BLK series delivers the signature MBRP sound and styling while protecting your investment with a multi-year warranty.

• Heavy-gauge aluminized steel construction with fully sealed seams
• High-heat black powder-coated tailpipe and stainless steel tips
• Mandrel-bent tubing for maximum exhaust flow and lower EGTs
• Direct bolt-on design using OEM mounting points
• Mellow exhaust profile for a performance sound without excessive drone
• Includes all necessary installation hardware and tips
• 3-year warranty on the system; 1-year warranty on the black finish

Fits 2017-2026 Ford F-250 and F-350 Super Duty Crew Cab models (6.2L / 7.3L).

The MBRP Armor Lite Series offers a high-value exhaust solution for Super Duty owners seeking improved flow and a deeper sound without the premium price tag. Constructed from heavy-gauge aluminized steel, this 4-inch cat-back system is engineered to withstand dings and dents from road debris. The tubing is fully mandrel-bent to maintain a constant diameter, eliminating the rippling and restrictions found in crush-bent pipes. This ensures maximum exhaust gas velocity, contributing to lower exhaust gas temperatures and improved throttle response.

Designed for a straightforward installation, this system utilizes your truck's factory mounting points and OEM hangers. The single-side exit design maintains a clean, classic profile while providing the signature MBRP mellow exhaust note. This Armor Lite system is an ideal choice for vehicles operating in dry climates or for owners prioritizing performance gains and sound on a budget.

• 4-inch mandrel-bent aluminized steel tubing
• Single-side exit with included stainless steel tips
• Direct bolt-on installation using OEM hangers
• Mellow performance exhaust note
• Designed specifically for Crew Cab configurations
• Manufacturer Part Number: Armor Lite Series

Fits select 2017-2026 Ford F-250 and F-350 Super Duty Super Cab and Crew Cab models (6.2L / 7.3L).

Built for drivers operating in extreme conditions, the MBRP Armor Pro Series catback exhaust system is constructed from high-grade T304 stainless steel for ultimate corrosion resistance. This 4-inch system features mandrel-bent tubing to ensure consistent diameter through every bend, eliminating rippling and turbulence. By optimizing exhaust flow and reducing backpressure, this system helps lower exhaust gas temperatures (EGTs) and improves throttle response.

The Armor Pro Series is designed for a straightforward bolt-on installation, utilizing the vehicle's factory hanger locations for a secure fit without custom fabrication. It delivers a mellow exhaust note that provides a performance presence without excessive cabin drone. Every Armor Pro system includes a matching stainless steel tip and is backed by a lifetime warranty.

• 4-inch mandrel-bent T304 stainless steel tubing
• Armor Pro Series lifetime warranty
• Direct bolt-on installation using OEM hangers
• Single side exit configuration
• Mellow performance exhaust note
• Includes stainless steel exhaust tip
• Fits Super Cab and Crew Cab configurations

Fits 2011-2016 Ford F-250 and F-350 Super Duty (6.2L V8 Gas).

The MBRP Armor Lite Series cat-back exhaust system is engineered to provide the signature MBRP sound and high-flow performance at an entry-level value. Constructed from heavy-gauge aluminized steel, this 4-inch system is ideal for vehicles operating in dry climates, offering significant resistance to dings and dents from road debris. Every tube is mandrel-bent to maintain a constant diameter, ensuring smooth exhaust flow, reduced backpressure, and lower exhaust gas temperatures (EGTs).

This single-side exit system is designed as a direct bolt-on upgrade, utilizing the factory mounting points and OEM hangers for a hassle-free installation. The kit comes complete with a stainless steel tip to finish the look and is built to improve throttle response and overall engine efficiency.

• 4-inch mandrel-bent aluminized steel tubing for maximum flow
• Single-side exit configuration with included stainless steel tip
• Direct bolt-on installation utilizes OEM hanger locations
• Fully sealed tubing for enhanced durability
• Delivers a rich, mellow exhaust note
• Improved torque, horsepower, and throttle response
• 3-year manufacturer warranty

Fits select 2011-2016 Ford F-250 and F-350 Super Duty (6.2L).

The MBRP Armor Plus Series cat-back exhaust system provides a significant upgrade in durability and flow for your Ford Super Duty. Engineered from 4-inch T409 stainless steel, this system is a value-oriented solution designed to resist penetrating rust in moderate climates. The mandrel-bent tubing ensures a consistent diameter through every curve, reducing backpressure and maximizing exhaust flow to improve throttle response and engine efficiency.

Designed for a precise fit, this system utilizes your vehicle's factory hanger locations for a straightforward bolt-on installation. It delivers a mellow, refined exhaust note that provides a deeper tone than the stock system without becoming intrusive during long hauls or towing. Each system comes complete with a polished stainless steel tip to finalize the rugged aesthetic.

• Armor Plus Series T409 stainless steel construction
• 4-inch mandrel-bent tubing for maximum flow
• Single side exit configuration
• Direct bolt-on installation using OEM hangers
• Mellow, refined exhaust tone
• Polished stainless steel exhaust tip included
• Limited Lifetime Warranty

Fits 2021-2026 Ford Bronco (2.3L / 2.7L).

Maximize your off-road capability and ground clearance with the MBRP Armor Pro Series 3-inch cat-back exhaust system. Specifically engineered for the modern Ford Bronco, this system features a high-clearance rear exit design that stays tucked up near the chassis, preventing damage from rocks and obstacles while navigating technical terrain. This design is the ideal choice for overlanding and trail riding where departure angles are critical.

Built from premium T304 stainless steel, the Armor Pro Series is highly resistant to corrosion and designed to withstand the harshest environments. The 3-inch mandrel-bent tubing ensures smooth exhaust gas transitions, resulting in significant flow improvements. On 2.7L models, this system provides gains of up to 8 horsepower and 8 ft-lbs of torque with a 32% increase in flow. The 2.3L powerplants see a massive flow increase of up to 87% over the stock configuration.

• 3-inch T304 stainless steel construction for maximum durability and corrosion resistance
• High-clearance design improves ground clearance and departure angles
• Mandrel-bent tubing for unrestricted exhaust flow and reduced backpressure
• Touring profile sound provides a performance exhaust note without excessive interior drone
• Direct bolt-on installation utilizing factory mounting points and hanger locations
• Performance gains (2.7L): +8 HP and +8 ft-lbs of torque
• Flow increases: Up to 87% (2.3L) and 32% (2.7L)

Fits 2011-2014 Ford F-150 SVT Raptor (6.2L).

The MBRP ARMOR LITE Series cat-back exhaust system is engineered to provide performance and a deep, aggressive tone for budget-conscious builds. This 3.5-inch system features heavy-gauge aluminized steel tubing, which offers high resistance to dings and dents from road debris—making it an excellent choice for vehicles operating in dry climates. The single turn-down exit configuration terminates before the rear axle, significantly improving ground clearance for off-road obstacles where traditional tailpipes might be vulnerable to damage.

Constructed with mandrel-bent tubing, this system ensures smooth exhaust flow by eliminating rippling in the bends. This increased flow efficiency helps lower exhaust gas temperatures and allows your engine to breathe better, improving overall horsepower and torque. Designed for a straightforward installation, it utilizes factory mounting points and OEM hangers.

• 3.5-inch heavy-gauge aluminized steel construction
• Mandrel-bent tubing for maximum flow and lower EGTs
• Single turn-down exit provides superior off-road clearance
• Direct bolt-on design using factory hanger locations
• Specific fitment for the 6.2L V8 Ford Raptor
• Wheelbase compatibility: SuperCab Short Bed (EC-SB) and SuperCrew Short Bed (CC-SB)
• 3-year manufacturer warranty

Fits 2021-2026 Ford Bronco 2-door and 4-door models (2.3L / 2.7L EcoBoost).

The MBRP ARMOR BLK Series cat-back exhaust system is engineered for Ford Bronco owners who demand a balance of aggressive styling and improved mechanical efficiency. This 3-inch system features a dual split rear exit configuration that transforms the rear profile of the vehicle. By utilizing mandrel-bent, heavy-gauge aluminized steel tubing, this exhaust maximizes exhaust flow by eliminating internal rippling in the bends, which results in lower exhaust gas temperatures (EGTs) and improved throttle response.

Built for durability in dry climates, the ARMOR BLK series features a specialized high-heat black powder coating on the tailpipes and tips for a stealthy, custom look. The system is designed as a direct bolt-on replacement, utilizing all OEM hanger locations for a straightforward installation process without the need for welding or major modifications.

• Up to 100% flow increase on 2.3L models and 40% increase on 2.7L models.
• 3-inch mandrel-bent aluminized steel tubing for maximum volume and velocity.
• High-heat black powder-coated tailpipes and tips.
• Moderate sound level suitable for daily driving and off-road use.
• Fully sealed seams for enhanced rust resistance.
• Complete bolt-on design with all necessary hardware included.
• Warranty: 3-year manufacturer warranty on components; 1-year warranty on black finish.

Fits 2021-2026 Ford Bronco 2-door and 4-door models equipped with the 2.3L or 2.7L EcoBoost engine.

The MBRP ARMOR LITE Series 3-inch Catback Exhaust System provides a high-flow performance upgrade for the Ford Bronco without the premium price tag of stainless steel. Engineered for owners in drier climates, this system is constructed from heavy-gauge aluminized steel tubing that resists dings and dents while providing a mellow, moderate exhaust note. The mandrel-bent design maintains a consistent diameter throughout the system, eliminating the rippling found in crush-bent alternatives to maximize exhaust flow and reduce exhaust gas temperatures (EGTs).

This dual split rear exit system is designed for a straightforward bolt-on installation, utilizing the original equipment (OE) hanger locations for a perfect fit. By significantly reducing backpressure—offering up to a 100% flow increase for 2.3L engines and a 40% increase for 2.7L engines—this exhaust helps your EcoBoost engine breathe better, improving throttle response and overall performance.

• 3-inch mandrel-bent aluminized steel tubing for maximum flow
• Dual split rear exit configuration with included stainless steel tips
• Up to 100% flow increase (2.3L) or 40% flow increase (2.7L)
• Bolt-on installation using factory mounting points
• Mellow, moderate sound level suitable for daily driving
• 3-year manufacturer warranty

Fits select 2011-2014 Ford F-150 (V6 EcoBoost) models including FX2, FX4, King Ranch, Lariat, Limited, Platinum, XL, and XLT.

The MBRP Armor Lite Series provides a high-value performance solution, delivering the same fitment and flow characteristics as premium lines in a cost-effective package. Built from heavy-gauge aluminized steel, this 2.5-inch cat-back system is an ideal choice for vehicles in dry climates. The mandrel-bent tubing ensures smooth exhaust gas velocity by eliminating rippling in the bends, helping to lower exhaust gas temperatures and improve throttle response.

This dual rear-exit system features a bolt-on design that utilizes the factory hanger locations for a secure fit without specialized tools. The kit produces a mellow, performance exhaust note and includes polished stainless steel tips to complete the install. As an Armor Lite series product, it balances durability with significant weight savings over stock components.

• System Type: Cat-Back
• Exit Style: Dual Rear
• Tubing Diameter: 2.5-inch
• Material: Heavy-gauge Aluminized Steel
• Construction: Mandrel-bent tubing for maximum flow
• Hardware: Stainless steel tips and installation hardware included
• Installation: Direct bolt-on to OEM hangers
• Warranty: 3-Year Manufacturer Warranty

Fits 2021-2026 Ford Bronco 2-door and 4-door models equipped with the 2.3L or 2.7L EcoBoost engine.

The MBRP Armor Lite Series high-clearance cat-back exhaust is engineered specifically for off-road enthusiasts who need maximum ground clearance and improved departure angles. By tucking the exhaust system higher under the chassis, this kit minimizes the risk of damage when navigating rock gardens or steep obstacles. Constructed from heavy-gauge mandrel-bent aluminized steel, this system provides a high-flow alternative to the restrictive factory exhaust without the premium price of stainless steel, making it an ideal choice for dry climates.

Technical performance is significantly improved via mandrel bending, which maintains a constant diameter through every curve to eliminate turbulence. This results in a flow increase of up to 35% for 2.7L engines and up to 93% for 2.3L engines, contributing to lower exhaust gas temperatures (EGTs) and sharper throttle response.

• High-clearance design optimized for rough terrain and steep departures
• Mandrel-bent aluminized steel tubing for maximum exhaust flow and dent resistance
• Up to 93% flow increase on 2.3L models; up to 35% on 2.7L models
• Direct bolt-on installation utilizes OEM hanger locations
• Designed for improved horsepower, torque, and throttle response
• Includes all necessary installation hardware

Fits 2021-2026 Ford Bronco 2-door and 4-door models (2.3L / 2.7L EcoBoost).

The MBRP Armor Pro Series high clearance cat-back exhaust is engineered for off-road enthusiasts who require maximum ground clearance without sacrificing performance. By tucking the exhaust system higher than the factory setup, this system significantly reduces the risk of impact during technical crawls and overlanding. Constructed from premium T304 stainless steel, it offers the highest level of corrosion resistance and durability for vehicles operated in extreme environments or salted winter roads.

Every system features mandrel-bent tubing to eliminate internal restrictions and turbulence. This design yields substantial improvements in exhaust scavenging, providing up to a 93% increase in flow for 2.3L engines and a 35% increase for 2.7L engines. The bolt-on installation utilizes existing factory hanger locations for a secure fit without permanent vehicle modifications.

• T304 stainless steel construction for maximum durability and easy maintenance
• High clearance design optimized for rough terrain and off-road obstacles
• Mandrel-bent tubing for unrestricted exhaust flow and lower EGTs
• Up to 93% flow increase (2.3L) or 35% flow increase (2.7L)
• Direct bolt-on installation using OEM mounting points
• Improved throttle response and exhaust note
• Armor Pro Series lifetime warranty

Fits 2011-2014 Ford F-150 models including XL, XLT, Lariat, King Ranch, Platinum, Limited, FX2, and FX4 (V6 EcoBoost).

The MBRP ARMOR LITE Series (P Series) exhaust system is engineered for Ford F-150 owners seeking the signature MBRP performance and sound in a value-oriented package. Constructed from heavy-gauge aluminized steel, this 3-inch cat-back system is specifically designed for vehicles in dry climates where corrosion resistance from road salt is not a primary concern. The single-side exit design maintains a clean, factory-plus appearance while significantly improving the exhaust note.

Performance is driven by mandrel-bent tubing, which ensures a constant diameter through every bend. Unlike standard crush-bent pipes that create restrictive ripples, this system maximizes exhaust gas velocity and reduces backpressure. This improved flow helps the V6 EcoBoost engine breathe more efficiently, resulting in better throttle response and a rich, mellow exhaust tone. The bolt-on design allows for a straightforward installation using common hand tools and factory mounting points.

• 3-inch mandrel-bent aluminized steel tubing for maximum flow
• Single side exit with signature MBRP styling
• Heavy-gauge material resists dings and dents from road debris
• Fully sealed tubing for reliable performance
• Direct bolt-on installation with included hardware
• Rich, mellow exhaust note without excessive cabin drone
• 1-Year Warranty (P/PLM Series)
• Manufacturer Part Number: S5236P

Fits 2011-2014 Ford F-150 models including FX2, FX4, King Ranch, Lariat, Limited, Platinum, XL, and XLT (V6 EcoBoost).

The MBRP ARMOR LITE Series provides a high-performance exhaust solution designed for value without compromising on fitment or sound. Constructed from heavy-gauge aluminized steel, this 3-inch cat-back system is an ideal choice for owners in dry climates looking for improved exhaust flow and a mellow, performance-oriented note. Each kit features mandrel-bent tubing to prevent rippling and restrictions at the bends, ensuring maximum airflow, reduced exhaust gas temperatures (EGTs), and increased throttle response.

Designed for a straightforward bolt-on installation, this system utilizes your vehicle's factory mounting points and OEM hangers. The package comes complete with a polished stainless steel tip for a finished appearance. This system balances durability with cost-effectiveness, offering the signature MBRP styling and performance profile while standing up to the demands of daily driving.

• Series: ARMOR LITE
• Material: Heavy-gauge Aluminized Steel
• Tubing Diameter: 3-inch
• Exit Style: Single Side Exit
• Tip Included: Polished Stainless Steel
• Installation: Bolt-on; Utilizes OEM Hangers
• Sound Level: Mellow Note
• Warranty: 3-Year

Fits select 2011-2014 Ford F-150 (V6 EcoBoost) submodels including XL, XLT, Lariat, FX2, FX4, King Ranch, Platinum, and Limited.

MBRP Armor Plus Series cat-back exhaust systems are engineered for durability and improved exhaust flow. Constructed from corrosion-resistant T409 stainless steel, this 3-inch system replaces your restrictive factory components with mandrel-bent tubing to minimize backpressure and internal turbulence. The result is a more efficient engine that delivers increased throttle response and lower exhaust gas temperatures (EGTs).

Designed with the enthusiast in mind, this system provides a mellow performance exhaust note that is noticeable without being intrusive. The kit is a complete bolt-on solution, utilizing your truck's OEM hanger locations for a straightforward installation. Every Armor Plus system is backed by a manufacturer's Limited Lifetime Warranty, offering a reliable, value-oriented solution for drivers in moderate climates.

• Armor Plus Series T409 stainless steel construction
• 3-inch mandrel-bent tubing for maximum flow
• Single side exit configuration behind the rear wheel
• Polished stainless steel tips included
• Mellow performance exhaust note
• Direct bolt-on installation using factory hangers
• Improved throttle response and power potential
• Limited Lifetime Warranty

Fits 2021-2026 Ford Bronco (2.3L / 2.7L).

The MBRP ARMOR BLK Series catback exhaust system delivers an aggressive performance profile and a custom look for your 2021-2026 Ford Bronco. Built with 3-inch mandrel-bent aluminized steel, this system is engineered to maximize exhaust flow by removing the rippling found in standard bends. This results in a massive flow increase—up to 93% for the 2.3L engine and 35% for the 2.7L—which reduces exhaust gas temperatures and sharpens throttle response.

Designed for durability and style, the ARMOR BLK series features a high-heat black powder coating on the tailpipe and tips for a stealthy aesthetic. The rest of the system utilizes heavy-gauge mill-finish steel for cost-effective performance in dry climates. This system features fully sealed seams and a moderate sound level, providing a deeper tone without overwhelming the cabin.

• 3-inch mandrel-bent aluminized steel tubing
• High-heat black powder-coated finish on tailpipe and tips
• Up to 93% flow increase (2.3L) and 35% flow increase (2.7L)
• Fully sealed seams for improved rust resistance
• Direct bolt-on installation using factory hanger locations
• Moderate performance sound level
• 3-year warranty on components; 1-year warranty on black finish

Fits 2021-2026 Ford Bronco (2.3L / 2.7L). This exhaust system is compatible with Badlands, Base, Big Bend, Black Diamond, Everglades, First Edition, Heritage Edition, Outer Banks, Stroppe Edition, and Wildtrak models.

The MBRP Armor Lite Series catback exhaust provides a high-flow performance solution for Bronco owners looking for improved sound and power without the premium cost of stainless steel. Constructed from heavy-gauge 3-inch aluminized steel, this system is designed to withstand impacts from trail debris while maintaining structural integrity. Every pipe is mandrel-bent to eliminate rippling and internal restrictions, significantly increasing exhaust gas velocity and reducing backpressure.

This system delivers a moderate, aggressive exhaust note while providing measurable performance gains, including up to a 93% flow increase on 2.3L EcoBoost engines and a 35% increase on 2.7L models. The bolt-on design utilizes factory hanger locations for a straightforward installation that requires no permanent vehicle modifications.

• Armor Lite Series heavy-gauge aluminized steel construction
• 3-inch mandrel-bent tubing for maximum flow
• Sealed seams for enhanced rust resistance
• Up to 93% flow increase (2.3L) / 35% flow increase (2.7L)
• Moderate sound level with improved throttle response
• Lower exhaust gas temperatures (EGTs)
• Direct bolt-on installation using OEM hangers

Fits 2021-2026 Ford Bronco models including Badlands, Base, Big Bend, Black Diamond, Everglades, Outer Banks, and Wildtrak (2.3L / 2.7L EcoBoost).

The MBRP Armor Pro Series catback exhaust is engineered for enthusiasts who demand maximum durability and flow for their 6th Gen Bronco. Constructed from 3-inch T304 stainless steel tubing, this system is highly resistant to corrosion and easy to maintain even in extreme off-road conditions. Every pipe is mandrel-bent to ensure smooth exhaust gas velocity and eliminate the restrictive rippling found in factory-style crushed bends. This design significantly improves exhaust flow by up to 93% on 2.3L models and 35% on 2.7L models, resulting in lower exhaust gas temperatures and improved throttle response.

• Lifetime Warranty through MBRP Armor Pro Series
• Heavy-duty T304 stainless steel construction for maximum longevity
• 3-inch mandrel-bent tubing for optimized exhaust flow
• Up to 93% flow increase (2.3L) or 35% flow increase (2.7L)
• Moderate exhaust tone for an enhanced, aggressive sound
• Direct bolt-on installation using factory mounting locations and hangers
• Includes all necessary hardware for installation

Fits 2011-2014 Ford F-150 models (5.0L V8).

The MBRP Armor Lite Series cat-back exhaust system is engineered for truck owners seeking improved flow and a performance sound without the premium price tag. Constructed from heavy-gauge aluminized steel, this system is an ideal choice for vehicles operating in dry climates. The dual split rear exit configuration provides a symmetrical, aggressive appearance while delivering a mellow exhaust note that enhances the driving experience without being overbearing.

Every kit features mandrel-bent tubing to ensure consistent diameters through every curve, eliminating the restrictive rippling found in crush-bent alternatives. This optimized flow path helps lower exhaust gas temperatures (EGTs) and improves throttle response and torque. Designed as a direct bolt-on upgrade, this system utilizes your F-150's factory hanger locations for a straightforward installation.

• Heavy-gauge aluminized steel tubing resists dents and debris damage
• Mandrel-bent construction ensures maximum exhaust gas velocity
• Dual split rear exit design with included stainless steel tips
• Direct bolt-on installation utilizing OEM mounting points
• Improved horsepower, torque, and throttle response
• Mellow performance exhaust note
• 3-year manufacturer warranty

Fits 2011-2014 Ford F-150 (5.0L).

The MBRP Armor Lite Series cat-back exhaust system is engineered for truck owners seeking performance and a mellow tone without the premium cost of stainless steel. Constructed from heavy-gauge aluminized steel, this system features mandrel-bent tubing to eliminate flow restrictions and rippling. This design ensures maximum exhaust scavenging and reduced backpressure, allowing your engine to breathe more efficiently for improved throttle response and lower exhaust gas temperatures.

Designed for a straightforward installation, this dual split side-exit system utilizes your Ford's factory hanger locations. The kit is a complete bolt-on solution and includes high-quality stainless steel tips to provide a finished, custom look that stands out. It is particularly well-suited for vehicles operating in dry climates where road salt is not a concern.

• Heavy-gauge aluminized steel tubing provides durability and impact resistance
• Fully sealed mandrel-bent tubing for maximum exhaust flow and efficiency
• Mellow performance exhaust note for a signature MBRP sound
• Dual split side exit configuration for a custom aesthetic
• Mirror-polished stainless steel tips included
• Direct bolt-on design utilizes OEM mounting points
• 3-year manufacturer warranty

Fits 2018-2024 Ford Expedition and Expedition Max models (3.5L).

The MBRP Armor Lite Series cat-back exhaust system provides a high-flow exhaust solution designed for durability and performance. This 3-inch system is constructed from heavy-gauge aluminized steel, making it an ideal choice for vehicles operating in dry climates. By replacing the restrictive factory exhaust with mandrel-bent tubing, this kit eliminates rippling in the bends to maximize exhaust flow and allow the engine to breathe more efficiently.

Engineering tests show this system increases exhaust flow by 51%, resulting in improved throttle response, lower exhaust gas temperatures (EGTs), and gains in horsepower and torque. The single side exit design offers the MBRP signature moderate tone, providing a deeper exhaust note without excessive cabin drone. This kit is a direct bolt-on upgrade that utilizes all factory mounting points and OEM hangers for a straightforward installation.

• 3-inch mandrel-bent aluminized steel tubing
• Single side exit configuration
• Increases exhaust flow by 51%
• Moderate exhaust tone for a performance sound
• Direct bolt-on installation using OEM hangers
• Improves throttle response and reduces EGTs

Fits select 2018-2024 Ford Expedition and Expedition Max models (3.5L).

Upgrade your vehicle’s performance and acoustics with the MBRP Armor Pro Series cat-back exhaust system. This 3-inch system is constructed from premium T304 stainless steel, providing the highest level of corrosion resistance and durability for vehicles operated in extreme conditions or salted winter environments. The tubing is fully mandrel-bent to maintain a constant diameter through every curve, eliminating rippling and turbulence to increase exhaust flow by 51% over the stock system.

Designed for a straightforward installation, this system utilizes the OEM hangers and features a direct bolt-on design that requires no permanent vehicle modifications. The moderate exhaust tone provides a more aggressive profile under acceleration without overwhelming the cabin during daily driving. MBRP Armor Pro Series components are backed by a lifetime warranty, ensuring this is the last exhaust system your Ford Expedition will ever need.

• 3-inch mandrel-bent T304 stainless steel tubing
• Single-side exit configuration
• 51% increase in exhaust flow over factory
• Moderate performance exhaust tone
• Bolt-on installation using factory mounting points
• Includes all necessary hardware for installation
• Manufacturer Lifetime Warranty

Fits 2011-2014 Ford F-150 (5.0L) Regular Cab Long Bed, SuperCab with 6.5-foot bed, and SuperCrew with 5.5-foot or 6.5-foot bed models.

The MBRP Armor Lite P Series exhaust system is engineered for truck owners seeking the perfect balance of performance and value. Constructed from heavy-gauge aluminized steel, this 3-inch cat-back system provides a durable solution that resists dings and dents from road debris while delivering the signature MBRP mellow exhaust note. The system features fully mandrel-bent tubing to ensure consistent diameters through every curve, minimizing backpressure and maximizing exhaust flow for improved throttle response and potential power gains.

Designed for a straightforward bolt-on installation, this single-side exit system utilizes factory mounting points and requires only common hand tools for setup. It is an ideal choice for vehicles operating in dry climates or for those looking to improve their engine's efficiency and sound profile without the premium price of stainless steel.

• 3-inch mandrel-bent aluminized steel tubing for maximum flow
• Single side-exit design with rich, mellow exhaust tone
• Fully sealed tubing for enhanced rust resistance
• Direct bolt-on installation with included hardware
• Designed to improve throttle response and minimize backpressure
• Includes a 1-year manufacturer warranty (Armor Lite/P Series)

Fits 2011-2014 Ford F-150 (FX2, FX4, King Ranch, Lariat, Platinum, STX, XL, XLT).

The MBRP ARMOR LITE Series provides a high-value performance exhaust solution without compromising on fitment or flow. Constructed from heavy-gauge aluminized steel, this 3-inch cat-back system is engineered to resist dings and dents while providing a significant upgrade over restrictive factory piping. This system is an ideal choice for vehicles in dry climates or for owners seeking the signature MBRP sound at an accessible price point.

Every pipe in this system is mandrel-bent to maintain a constant diameter, preventing the rippling and restriction found in crush-bent tubing. By streamlining exhaust gas flow, this system reduces backpressure and exhaust gas temperatures (EGTs) while improving throttle response and power output. The single side exit design delivers a mellow, street-legal exhaust note that is noticeable under acceleration without being overbearing during daily driving.

• System Type: Cat-Back
• Tubing Diameter: 3-Inch
• Material: Heavy-Duty Aluminized Steel
• Exit Style: Single Side Exit (behind passenger rear wheel)
• Tip Material: Stainless Steel (Included)
• Installation: Bolt-on design; utilizes factory hanger locations
• Warranty: 3-Year Manufacturer Warranty

Fits 2011-2014 Ford F-150 models including FX2, FX4, King Ranch, Lariat, Platinum, STX, XL, and XLT.

The MBRP ARMOR PLUS Series cat-back exhaust system is engineered to provide a balance of value and long-term durability for Ford F-150 owners. Constructed from 3-inch T409 stainless steel, this system is specifically designed to resist penetrating rust, making it an ideal choice for vehicles in moderate climates. The mandrel-bent tubing ensures consistent diameter throughout every curve, minimizing backpressure and optimizing exhaust flow to help lower exhaust gas temperatures and improve throttle response.

This single side-exit system delivers the signature MBRP mellow exhaust note, providing a deeper tone without overwhelming cabin drone. Installation is straightforward and requires no specialized tools, as the system utilizes factory hanger locations and includes all necessary hardware and polished stainless steel tips for a complete bolt-on upgrade.

• 3-inch mandrel-bent T409 stainless steel tubing for maximum flow
• Complete single side exit configuration with polished tips included
• Direct bolt-on installation using OEM hanger locations
• Mellow, performance-oriented exhaust note
• Includes all required installation hardware
• Manufacturer Part Number: S5236409 (ARMOR PLUS Series)
• Limited Lifetime Warranty against manufacturer defects

Fits 2011-2014 Ford F-150 SVT Raptor (6.2L) with SuperCab or SuperCrew Short Bed configurations.

The MBRP Armor Lite Series cat-back exhaust system is engineered for truck owners looking for improved performance and a deeper exhaust note without the premium price tag. Constructed from heavy-gauge aluminized steel, this 3.5-inch system is designed to withstand debris and provide a durable solution for vehicles operating in dry climates. Every pipe is mandrel-bent to maintain a constant diameter, ensuring maximum exhaust flow, reduced backpressure, and lower exhaust gas temperatures.

Installation is straightforward thanks to a bolt-on design that utilizes the factory mounting points and OEM hangers. The single-exit configuration provides a clean, classic look, finished with a high-quality stainless steel tip. This system balances better throttle response and increased torque with a mellow, street-friendly exhaust note.

• 3.5-inch mandrel-bent aluminized steel tubing for maximum flow
• Direct bolt-on installation using OEM hangers
• Includes high-quality stainless steel exhaust tips
• Engineered for improved throttle response and torque
• Mellow, performance-oriented exhaust note
• 3-year manufacturer warranty