Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Welcome to Atlus Automotive
Main menu
-
Performance
- Performance
-
Intake & Exhaust
- Intake & Exhaust
- Air Intake Systems
- Cold Air Intakes
- Air Intake Components
- Air Filters
- Air Filters - Drop In
- Air Filters - Direct Fit
- Air Filters - Universal Fit
- Pre-Filters
- Recharge Kits
- OE Replacement Air Intake Components
- Exhaust, Mufflers & Tips
- Catback
- Axle Back
- Muffler
- Tips
- Headers & Manifolds
- Connecting Pipes
- Catalytic Converter Direct Fit
- Catalytic Converter Universal
- Exhaust Collector
- Merge Collectors
-
Engine Upgrades
- Engine Upgrades
- Engine Components
- Camshafts
- Valve Springs, Retainers
- Head Gaskets
- Head Stud & Bolt Kits
- Main Stud & Bolt Kits
- Gasket Kits
- Engine Mounts
- Oil Catch Cans
- Oil Separators
- Throttle Bodies
- Throttle Body Spacers
- Crankshaft Dampers
- Valves
- Piston Rings
- Piston Sets - Forged - 4cyl
- Piston Sets - Cast - 4cyl
- Connecting Rods - 4Cyl
- Rotating Assemblies
- Stroker Kits
-
Turbo & Cooling
-
Fuel, Ignition & Tuning
-
Suspension & Handling
- Suspension & Handling
-
Lowering & Coilovers
-
Arms, Links & Alignment
-
Lift & Off-Road Suspension
-
Chassis & Bracing
-
Wheels & Tires
- Wheels & Tires
-
Wheels
-
Tires
-
Drivetrain & Clutch
-
Brakes
- Brakes
-
Pads & Rotors
-
Brake Kits & Calipers
-
Lines, Fluid & Hardware
-
Exterior & Lighting
- Exterior & Lighting
-
Lighting
-
Exterior Styling
-
Bumpers & Protection
-
Interior & Electronics
- Interior & Electronics
-
Interior Upgrades
-
Gauges & Electronics
-
Audio & Safety
-
Overland & Utility
- Overland & Utility
-
Bed Covers & Bed Gear
-
Steps, Racks & Storage
-
Trail & Towing
-
Maintenance & Garage
- Maintenance & Garage
-
Oil, Fluids & Filters
-
Detailing & Car Care
-
Tools & Fabrication
Your cart
Choose your Location
-
Atlus
1340 Cobb Dr, Unit 1, Eustis, FL 32736
352-234-4458
Mon – Fri: 8:30 am – 4:30 pm
Sat: 9:00 am – 2:00 pm
Sun: Closed
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
1731 products
1731 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
The MagnaFlow Street Series Cat-Back Performance Exhaust System 16642 brings out the personality of your Car with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 3 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Car exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Car's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16642 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16642 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno-proven performance
- Dyno Proven Performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2005-2010 | Chrysler | 300 | C SRT8 |
| 2006-2010 | Dodge | Charger | SRT8 |
| 2006-2008 | Dodge | Magnum | SRT8 |
The MagnaFlow 1999-2005 Mazda Miata Street Series Cat-Back Performance Exhaust System 16638 brings out the personality of your 1.8L 1999-2005 Mazda Miata with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Single Straight Passenger Side Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Mazda Miata exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Mazda Miata's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16638 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16638 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno-proven performance
- Dyno Proven Performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1999 | Mazda | Miata | 10th Anniversary |
| 1999-2005 | Mazda | Miata | Base |
| 2000-2005 | Mazda | Miata | LS |
| 2000-2003 | Mazda | Miata | SE |
| 2003 | Mazda | Miata | Shinsen |
The MagnaFlow Touring Series Cat-Back Performance Exhaust System 16536 is the perfect partner for your 2.7L 1984-1987 BMW to take on a grand tour or a weekend cruise thanks to the powerful, resonant exhaust note and dyno-proven performance it brings to the table. This durable, corrosion resistant stainless steel exhaust kit is engineered to conquer the miles with ease while enhancing your driving experience with Moderate exterior and Mild interior sound levels generated through its fast-flowing, mandrel bent 2.25in. main piping and 2 Straight-Through muffler that terminate in a Dual Straight Driver Side Rear exit with 3in. Polished Welded-On Double Wall Angle Cut Folded Edge tips. 16536 features a cat-back layout design to replace your import's stock exhaust components from the catalytic converter on back. This BMW exhaust system is compatible with 1984-1987 engines. The use of extensive 3D scans made during the development process has resulted in an easy-to-install, direct-fit design that fits your BMW like a glove. 16536 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's limited lifetime construction warranty.
- 409 Stainless Steel Construction
- Increased Horsepower And Torque
- Mandrel bent tubing
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1984-1987 | BMW | 325e | Base |
| 1986-1987 | BMW | 325es | Base |
The MagnaFlow Touring Series Cat-Back Performance Exhaust System 16535 is the perfect partner for your 2.5L 1987-1991 BMW to take on a grand tour or a weekend cruise thanks to the powerful, resonant exhaust note and dyno-proven performance it brings to the table. This durable, corrosion resistant stainless steel exhaust kit is engineered to conquer the miles with ease while enhancing your driving experience with Moderate exterior and Mild interior sound levels generated through its fast-flowing, mandrel bent 2.25in. main piping and 1 Straight-Through muffler that terminate in a Dual Straight Driver Side Rear exit with 3in. Polished Welded-On Double Wall Angle Cut Folded Edge tips. 16535 features a cat-back layout design to replace your import's stock exhaust components from the catalytic converter on back. This BMW exhaust system is compatible with 1987-1991 engines. The use of extensive 3D scans made during the development process has resulted in an easy-to-install, direct-fit design that fits your BMW like a glove. 16535 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's limited lifetime construction warranty.
- 409 Stainless Steel Construction
- Increased Horsepower And Torque
- Mandrel bent tubing
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1987-1991 | BMW | 325i | Base |
| 1987-1991 | BMW | 325is | Base |
| 1988-1991 | BMW | 325iX | Base |
The MagnaFlow 2008-2013 BMW 128i Touring Series Cat-Back Performance Exhaust System 16525 is the perfect partner for your 3.0L 2008-2013 BMW 128i to take on a grand tour or a weekend cruise thanks to the powerful, resonant exhaust note and dyno-proven performance it brings to the table. This durable, corrosion resistant stainless steel exhaust kit is engineered to conquer the miles with ease while enhancing your driving experience with Moderate exterior and Mild interior sound levels generated through its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through muffler that terminate in a Dual Straight Driver Side Rear exit with 3.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips. 16525 features a cat-back layout design to replace your import's stock exhaust components from the catalytic converter on back. This BMW 128i exhaust system is compatible with 2008-2013 engines. The use of extensive 3D scans made during the development process has resulted in an easy-to-install, direct-fit design that fits your BMW 128i like a glove. 16525 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's limited lifetime construction warranty.
- 409 Stainless Steel Construction
- Increased Horsepower And Torque
- Mandrel bent tubing
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2008-2013 | BMW | 128i | Base |
The MagnaFlow Street Series Cat-Back Performance Exhaust System 16520 brings out the personality of your Truck with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Clamp-On Single Wall Angle Cut Rolled Edge tips, this Truck exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Truck's to shame. With this system your vehicle will be producing Aggressive exterior and Moderate interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16520 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16520 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno-proven performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2007-2008,2010 | Ford | F-150 | FX2 |
| 2004-2010 | Ford | F-150 | FX4 |
| 2007-2008,2010 | Ford | F-150 | Harley-Davidson Edition |
| 2005-2010 | Ford | F-150 | King Ranch |
| 2004-2010 | Ford | F-150 | Lariat |
| 2008 | Ford | F-150 | Limited |
| 2009-2010 | Ford | F-150 | Platinum |
| 2004-2010 | Ford | F-150 | STX |
| 2008 | Ford | F-150 | THE 60TH ANNIVERSARY EDITION |
| 2004-2010 | Ford | F-150 | XL |
| 2004-2010 | Ford | F-150 | XLT |
| 2006-2008 | Lincoln | Mark LT | Base |
The MagnaFlow 2008 Volkswagen R32 Sport Series Cat-Back Performance Exhaust System 16502 enhances your 3.2L 2008-2008 Volkswagen R32 with an aggressive character that is sure to help you stand out from the other Volkswagen R32 you encounter on the street. With its 2.5in. diameter fast-flowing mandrel bent main piping that passes through 1 Straight-Through mufflers before ending in a Dual Center Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this dyno-proven Volkswagen R32 exhaust system refuses to be ignored. As such, 16502 is tuned to produce our powerful, resonant signature exhaust note at Aggressive exterior and Moderate interior sound levels, so please check to ensure compliance with local noise regulations. The system's cat-back design replaces all your import's stock exhaust components from the catalytic converter on back. Extensive 3D scanning and CNC precision robotic manufacturing techniques are used to ensure that your exhaust system fits perfectly with just a simple do-it-yourself installation process. The durable, corrosion resistant stainless steel construction of 16502 is backed by MagnaFlow's limited lifetime warranty.
- High-Performance Lightweight Design
- Dyno Proven Performance
- Dyno-proven performance
- Racing inspired sound
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2008 | Volkswagen | R32 | Base |
The MagnaFlow Street Series Crossmember-Back Performance Exhaust System 15899 brings enhanced engine sound and dyno-proven performance to your muscle car with a healthy helping of our deep, resonant signature exhaust note at Aggressive exterior and Moderate interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features a crossmember-back layout designed to replace your exhaust system from the crossmember on back. With its fast-flowing, mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit that you can enhance with tips of your choosing, your muscle car will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15899 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's limited lifetime construction warranty.
- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno-proven performance
- Dyno Proven Performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1973-1975 | Buick | Apollo | Base |
| 1975 | Buick | Apollo | SR |
| 1967-1974 | Chevrolet | Camaro | Base |
| 1973-1974 | Chevrolet | Camaro | LT |
| 1967-1973 | Chevrolet | Camaro | RS |
| 1967-1972 | Chevrolet | Camaro | SS |
| 1967-1974 | Chevrolet | Camaro | Z28 |
| 1968 | Chevrolet | Chevy II | Nova |
| 1969-1975 | Chevrolet | Nova | Base |
| 1973-1975 | Chevrolet | Nova | Custom |
| 1975 | Chevrolet | Nova | LN |
| 1975 | Chevrolet | Nova | Police |
| 1973-1975 | Oldsmobile | Omega | Base |
| 1975 | Oldsmobile | Omega | Salon |
| 1967 | Pontiac | Firebird | 326 |
| 1968-1969 | Pontiac | Firebird | 350 |
| 1969 | Pontiac | Firebird | 350 HO |
| 1967-1969 | Pontiac | Firebird | 400 |
| 1967-1974 | Pontiac | Firebird | Base |
| 1970-1974 | Pontiac | Firebird | Esprit |
| 1970-1974 | Pontiac | Firebird | Formula |
| 1967-1968 | Pontiac | Firebird | HO |
| 1967-1969 | Pontiac | Firebird | Sprint |
| 1969-1974 | Pontiac | Firebird | Trans Am |
| 1971-1975 | Pontiac | Ventura | Base |
| 1973-1975 | Pontiac | Ventura | Custom |
| 1974 | Pontiac | Ventura | GTO |
| 1975 | Pontiac | Ventura | S |
| 1975 | Pontiac | Ventura | SJ |
The MagnaFlow Street Series Crossmember-Back Performance Exhaust System 15898 brings enhanced engine sound and dyno-proven performance to your muscle car with a healthy helping of our deep, resonant signature exhaust note at Aggressive exterior and Moderate interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features a crossmember-back layout designed to replace your exhaust system from the crossmember on back. With its fast-flowing, mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear Behind Rear Tires exit that you can enhance with tips of your choosing, your muscle car will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15898 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's limited lifetime construction warranty.
- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno-proven performance
- Dyno Proven Performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1970-1972 | Buick | GS | Base |
| 1968-1969 | Buick | GS 350 | Base |
| 1968-1969 | Buick | GS 400 | Base |
| 1970-1972 | Buick | GS 455 | Base |
| 1970 | Buick | GS 455 | GSX |
| 1970,1972 | Buick | Skylark | 350 |
| 1968-1972 | Buick | Skylark | Base |
| 1968-1972 | Buick | Skylark | Custom |
| 1968-1969 | Buick | Special | Base |
| 1968 | Chevrolet | Chevelle | 300 |
| 1968-1969 | Chevrolet | Chevelle | 300 Deluxe |
| 1970-1972 | Chevrolet | Chevelle | Base |
| 1968-1972 | Chevrolet | Chevelle | Concours |
| 1969-1972 | Chevrolet | Chevelle | Concours Estate |
| 1973 | Chevrolet | Chevelle | Deluxe |
| 1969-1972 | Chevrolet | Chevelle | Greenbrier |
| 1968-1973 | Chevrolet | Chevelle | Malibu |
| 1973 | Chevrolet | Chevelle | Malibu Estate |
| 1968-1972 | Chevrolet | Chevelle | Nomad |
| 1968 | Chevrolet | Chevelle | Nomad Custom |
| 1971-1972 | Chevrolet | Chevelle | SS |
| 1968-1970 | Chevrolet | Chevelle | SS 396 |
| 1968-1973 | Chevrolet | El Camino | Base |
| 1968-1973 | Chevrolet | El Camino | Custom |
| 1968-1973 | Chevrolet | El Camino | SS |
| 1970-1973 | Chevrolet | Monte Carlo | Base |
| 1973 | Chevrolet | Monte Carlo | Landau |
| 1973 | Chevrolet | Monte Carlo | S |
| 1968-1971 | Oldsmobile | 442 | Base |
| 1968-1973 | Oldsmobile | Cutlass | Base |
| 1972 | Oldsmobile | Cutlass | Cruiser |
| 1968,1971-1973 | Oldsmobile | Cutlass | S |
| 1968-1973 | Pontiac | GTO | Base |
| 1970-1971 | Pontiac | GTO | The Judge |
The MagnaFlow Street Series Crossmember-Back Performance Exhaust System 15896 brings enhanced engine sound and dyno-proven performance to your muscle car with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features a crossmember-back layout designed to replace your exhaust system from the crossmember on back. With its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit that you can enhance with tips of your choosing, your muscle car will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15896 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's limited lifetime construction warranty.
- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno-proven performance
- Dyno Proven Performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1973-1975 | Buick | Apollo | Base |
| 1975 | Buick | Apollo | SR |
| 1967-1974 | Chevrolet | Camaro | Base |
| 1973-1974 | Chevrolet | Camaro | LT |
| 1967-1973 | Chevrolet | Camaro | RS |
| 1967-1972 | Chevrolet | Camaro | SS |
| 1967-1974 | Chevrolet | Camaro | Z28 |
| 1968 | Chevrolet | Chevy II | Nova |
| 1969-1975 | Chevrolet | Nova | Base |
| 1973-1975 | Chevrolet | Nova | Custom |
| 1975 | Chevrolet | Nova | LN |
| 1975 | Chevrolet | Nova | Police |
| 1973-1975 | Oldsmobile | Omega | Base |
| 1975 | Oldsmobile | Omega | Salon |
| 1967 | Pontiac | Firebird | 326 |
| 1968-1969 | Pontiac | Firebird | 350 |
| 1969 | Pontiac | Firebird | 350 HO |
| 1967-1969 | Pontiac | Firebird | 400 |
| 1967-1974 | Pontiac | Firebird | Base |
| 1970-1974 | Pontiac | Firebird | Esprit |
| 1970-1974 | Pontiac | Firebird | Formula |
| 1967-1968 | Pontiac | Firebird | HO |
| 1967-1969 | Pontiac | Firebird | Sprint |
| 1969-1974 | Pontiac | Firebird | Trans Am |
| 1971-1975 | Pontiac | Ventura | Base |
| 1973-1975 | Pontiac | Ventura | Custom |
| 1974 | Pontiac | Ventura | GTO |
| 1975 | Pontiac | Ventura | S |
| 1975 | Pontiac | Ventura | SJ |
The MagnaFlow Street Series Crossmember-Back Performance Exhaust System 15894 brings enhanced engine sound and dyno-proven performance to your muscle car with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features a crossmember-back layout designed to replace your exhaust system from the crossmember on back. With its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Multiple Exit Options exit with 2.75in. Polished Weld-On Single Wall Turndown Cut Edge tips, your muscle car will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15894 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's limited lifetime construction warranty.
- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno-proven performance
- Dyno Proven Performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1970-1972 | Buick | GS | Base |
| 1968-1969 | Buick | GS 350 | Base |
| 1968-1969 | Buick | GS 400 | Base |
| 1970-1972 | Buick | GS 455 | Base |
| 1970 | Buick | GS 455 | GSX |
| 1970,1972 | Buick | Skylark | 350 |
| 1968-1972 | Buick | Skylark | Base |
| 1968-1972 | Buick | Skylark | Custom |
| 1968-1969 | Buick | Special | Base |
| 1968 | Chevrolet | Chevelle | 300 |
| 1968-1969 | Chevrolet | Chevelle | 300 Deluxe |
| 1970-1972 | Chevrolet | Chevelle | Base |
| 1968-1972 | Chevrolet | Chevelle | Concours |
| 1969-1972 | Chevrolet | Chevelle | Concours Estate |
| 1973 | Chevrolet | Chevelle | Deluxe |
| 1969-1972 | Chevrolet | Chevelle | Greenbrier |
| 1968-1973 | Chevrolet | Chevelle | Malibu |
| 1973 | Chevrolet | Chevelle | Malibu Estate |
| 1968-1972 | Chevrolet | Chevelle | Nomad |
| 1968 | Chevrolet | Chevelle | Nomad Custom |
| 1971-1972 | Chevrolet | Chevelle | SS |
| 1968-1970 | Chevrolet | Chevelle | SS 396 |
| 1968-1973 | Chevrolet | El Camino | Base |
| 1968-1973 | Chevrolet | El Camino | Custom |
| 1968-1973 | Chevrolet | El Camino | SS |
| 1970-1973 | Chevrolet | Monte Carlo | Base |
| 1973 | Chevrolet | Monte Carlo | Landau |
| 1973 | Chevrolet | Monte Carlo | S |
| 1968-1971 | Oldsmobile | 442 | Base |
| 1968-1973 | Oldsmobile | Cutlass | Base |
| 1972 | Oldsmobile | Cutlass | Cruiser |
| 1968,1971-1973 | Oldsmobile | Cutlass | S |
| 1968-1973 | Pontiac | GTO | Base |
| 1970-1971 | Pontiac | GTO | The Judge |
The MagnaFlow 2005-2009 Ford Mustang Street Series Cat-Back Performance Exhaust System 15881 brings out the personality of your 4.6L, 5.4L 2005-2009 Ford Mustang with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Ford Mustang exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford Mustang's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15881 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15881 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno-proven performance
- Dyno Proven Performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2008-2009 | Ford | Mustang | Bullitt |
| 2005-2009 | Ford | Mustang | GT |
| 2007-2008 | Ford | Mustang | Shelby GT |
| 2007-2009 | Ford | Mustang | Shelby GT500 |
| 2009 | Ford | Mustang | Shelby GT500KR |
The MagnaFlow 2004-2005 Dodge Ram 1500 Street Series Cat-Back Performance Exhaust System 15832 brings out the personality of your 8.3L 2004-2005 Dodge Ram 1500 with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Dual Straight Passenger Side Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Dodge Ram 1500 exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Dodge Ram 1500's to shame. With this system your vehicle will be producing Aggressive exterior and Moderate interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15832 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15832 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno-proven performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2004-2005 | Dodge | Ram 1500 | SRT-10 |
The MagnaFlow 1967-1970 Ford Mustang Street Series Crossmember-Back Performance Exhaust System 15816 brings enhanced engine sound and dyno-proven performance to your 3.3L, 4.1L, 4.7L, 5.0L, 5.8L, 6.4L, 7.0L 1967-1970 Ford Mustang with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this Ford Mustang exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features a crossmember-back layout designed to replace your Ford Mustang's exhaust system from the crossmember on back. With its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 2.75in. Polished Welded-On Single Wall Turndown Cut Edge tips, your muscle car will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15816 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's limited lifetime construction warranty.
- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno-proven performance
- Dyno Proven Performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1967-1970 | Ford | Mustang | Base |
| 1969-1970 | Ford | Mustang | Boss 302 |
| 1969-1970 | Ford | Mustang | Boss 429 |
| 1970 | Ford | Mustang | Grande |
| 1970 | Ford | Mustang | Mach 1 |
| 1967-1970 | Ford | Mustang | Shelby GT-350 |
| 1967-1970 | Ford | Mustang | Shelby GT-500 |
| 1968 | Ford | Mustang | Shelby GT-500KR |
The MagnaFlow 1964-1966 Ford Mustang Street Series Crossmember-Back Performance Exhaust System 15815 brings enhanced engine sound and dyno-proven performance to your 2.8L, 3.3L, 4.3L, 4.7L 1964-1966 Ford Mustang with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this Ford Mustang exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features a crossmember-back layout designed to replace your Ford Mustang's exhaust system from the crossmember on back. With its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 2.75in. Polished Welded-On Single Wall Turndown Cut Edge tips, your muscle car will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15815 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's limited lifetime construction warranty.
- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno-proven performance
- Dyno Proven Performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1964-1966 | Ford | Mustang | Base |
| 1965-1966 | Ford | Mustang | Shelby GT-350 |
| 1966 | Ford | Mustang | Shelby GT-350H |
The MagnaFlow 2000-2005 Toyota Celica Street Series Axle-Back Performance Exhaust System 15812 brings enhanced engine sound and dyno-proven performance to your 1.8L 2000-2005 Toyota Celica with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this Toyota Celica exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features an axle-back layout designed to replace your Toyota Celica's exhaust system from near the rear axle on back. With its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Single Straight Passenger Side Rear exit with 4in. Polished Welded-On Double Wall Straight Cut Rolled Edge tips, your ride will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15812 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno-proven performance
- Dyno Proven Performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2000-2005 | Toyota | Celica | GTS |
The MagnaFlow 2000-2004 Toyota Tacoma Street Series Cat-Back Performance Exhaust System 15811 brings out the personality of your 2.7L, 3.4L 2000-2004 Toyota Tacoma with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 3in. Polished Welded-On Single Wall Angle Cut Cut Edge tips, this Toyota Tacoma exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Toyota Tacoma's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15811 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15811 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno-proven performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2000-2004 | Toyota | Tacoma | Base |
| 2000 | Toyota | Tacoma | Limited |
| 2000-2004 | Toyota | Tacoma | Pre Runner |
| 2000 | Toyota | Tacoma | SR5 |
The MagnaFlow 2001-2006 Toyota Sequoia Street Series Cat-Back Performance Exhaust System 15808 brings out the personality of your 4.7L 2001-2006 Toyota Sequoia with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Single Straight Passenger Side Rear exit with 3.5 x 5.5in. Polished Welded-On Double Wall Straight Cut Rolled Edge tips, this Toyota Sequoia exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Toyota Sequoia's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15808 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15808 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno-proven performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2001-2007 | Toyota | Sequoia | Limited |
| 2001-2007 | Toyota | Sequoia | SR5 |
The MagnaFlow 2003-2006 Toyota Corolla Street Series Cat-Back Performance Exhaust System 15807 brings out the personality of your 1.8L 2003-2006 Toyota Corolla with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.25in. main piping and 2 Straight-Through mufflers ending in a Single Straight Passenger Side Rear exit with 3in. Polished Welded-On Single Wall Straight Cut Rolled Edge tips, this Toyota Corolla exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Toyota Corolla's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15807 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15807 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno-proven performance
- Dyno Proven Performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2003-2006 | Toyota | Corolla | CE |
| 2003-2006 | Toyota | Corolla | LE |
| 2003-2006 | Toyota | Corolla | S |
| 2005-2006 | Toyota | Corolla | XRS |
The MagnaFlow 2002-2003 Ford F-150 Street Series Cat-Back Performance Exhaust System 15772 brings out the personality of your 5.4L 2002-2003 Ford F-150 with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Dual Same Side Behind Passenger Rear Tire exit with 3.5in. Polished Welded-On Single Wall Slash Cut Cut Edge tips, this Ford F-150 exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford F-150's to shame. With this system your vehicle will be producing Aggressive exterior and Moderate interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15772 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15772 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno-proven performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2002-2003 | Ford | F-150 | Harley-Davidson Edition |
| 2002-2003 | Ford | F-150 | King Ranch |
| 2002-2003 | Ford | F-150 | Lariat |
| 2002-2003 | Ford | F-150 | XLT |
The MagnaFlow Street Series Cat-Back Performance Exhaust System 15759 brings out the personality of your Car with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.25in. main piping and 2 Straight-Through mufflers ending in a Single Straight Driver Side Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Car exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Car's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15759 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15759 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno-proven performance
- Dyno Proven Performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2003-2008 | Pontiac | Vibe | Base |
| 2003-2006 | Pontiac | Vibe | GT |
| 2003-2008 | Toyota | Matrix | Base |
| 2003-2008 | Toyota | Matrix | XR |
| 2003-2006 | Toyota | Matrix | XRS |
The Street Series Stainless Performance Exhaust system delivers dyno proven power with a comfortable interior sound and performance exterior sound. MagnaFlow Performance Exhaust System Kit 15750 is made of durable stainless steel and built using CNC precision robotic manufacturing techniques, all backed by MagnaFlow’s limited lifetime warranty.
- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno-proven performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1996-1997 | Chevrolet | C1500 | Base |
| 1996-1998 | Chevrolet | C1500 | Cheyenne |
| 1996-1998 | Chevrolet | C1500 | Silverado |
| 1996-1998 | Chevrolet | C1500 | WT |
| 1996-1997 | Chevrolet | K1500 | Base |
| 1996-1998 | Chevrolet | K1500 | Cheyenne |
| 1996-1998 | Chevrolet | K1500 | Silverado |
| 1996-1998 | Chevrolet | K1500 | WT |
| 1996 | Chevrolet | K2500 | Base |
| 1996 | Chevrolet | K2500 | Cheyenne |
| 1996 | Chevrolet | K2500 | Silverado |
| 1997 | GMC | C1500 | Sierra GT |
| 1996-1998 | GMC | C1500 | Sierra SL |
| 1996-1998 | GMC | C1500 | Sierra SLE |
| 1996-1998 | GMC | C1500 | Sierra SLT |
| 1996-1998 | GMC | C1500 | Sierra Special |
| 1996-1998 | GMC | K1500 | Sierra SL |
| 1996-1998 | GMC | K1500 | Sierra SLE |
| 1996-1998 | GMC | K1500 | Sierra SLT |
| 1996-1998 | GMC | K1500 | Sierra Special |
The MagnaFlow Touring Series Cat-Back Performance Exhaust System 15745 is the perfect partner for your 1.8L, 2.8L 1999-2005 Volkswagen to take on a grand tour or a weekend cruise thanks to the powerful, resonant exhaust note and dyno-proven performance it brings to the table. This durable, corrosion resistant stainless steel exhaust kit is engineered to conquer the miles with ease while enhancing your driving experience with Moderate exterior and Mild interior sound levels generated through its fast-flowing, mandrel bent 2.25in. main piping and 2 Straight-Through muffler that terminate in a Dual Straight Driver Side Rear exit with 3in. Polished Welded-On Double Wall Straight Cut Rolled Edge tips. 15745 features a cat-back layout design to replace your import's stock exhaust components from the catalytic converter on back. This Volkswagen exhaust system is compatible with 1999-2005 engines. The use of extensive 3D scans made during the development process has resulted in an easy-to-install, direct-fit design that fits your Volkswagen like a glove. 15745 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's limited lifetime construction warranty.
- 409 Stainless Steel Construction
- Increased Horsepower And Torque
- Mandrel bent tubing
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2002-2004 | Volkswagen | Beetle | Turbo S |
| 1999 | Volkswagen | Golf | GTI |
| 2002-2005 | Volkswagen | Golf | GTI 1.8T |
| 2003 | Volkswagen | Golf | GTI 20th Anniversary |
| 2002 | Volkswagen | Golf | GTI 337 |
| 2000-2001 | Volkswagen | Golf | GTI GLX |
| 2002-2005 | Volkswagen | Golf | GTI VR6 |
The MagnaFlow Street Series Cat-Back Performance Exhaust System 15734 brings out the personality of your SUV with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3.5in. main piping and 1 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 4in. Polished Welded-On Single Wall Angle Cut Rolled Edge tips, this SUV exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other SUV's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15734 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15734 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno-proven performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2002-2006 | Cadillac | Escalade | Base |
| 2002-2006 | GMC | Yukon | Denali |
The MagnaFlow 1999-2004 Ford Mustang Street Series Cat-Back Performance Exhaust System 15717 brings out the personality of your 3.8L, 3.9L 1999-2004 Ford Mustang with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 3in. Polished Clamp-On Single Wall Angle Cut Cut Edge tips, this Ford Mustang exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford Mustang's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15717 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15717 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno-proven performance
- Dyno Proven Performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1999-2004 | Ford | Mustang | Base |
The MagnaFlow 1990-1997 Mazda Miata Street Series Cat-Back Performance Exhaust System 15715 brings out the personality of your 1.6L, 1.8L 1990-1997 Mazda Miata with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.25in. main piping and 2 Straight-Through mufflers ending in a Single Straight Passenger Side Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Mazda Miata exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Mazda Miata's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15715 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15715 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno-proven performance
- Dyno Proven Performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1990-1997 | Mazda | Miata | Base |
| 1993 | Mazda | Miata | LE |
| 1994-1997 | Mazda | Miata | M Edition |
| 1991 | Mazda | Miata | SE |
| 1997 | Mazda | Miata | STO |
The MagnaFlow 1994-1997 Honda Accord Street Series Cat-Back Performance Exhaust System 15686 brings out the personality of your 2.2L 1994-1997 Honda Accord with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.25in. main piping and 2 Straight-Through mufflers ending in a Single Straight Passenger Side Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Honda Accord exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Honda Accord's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15686 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15686 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno-proven performance
- Dyno Proven Performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1996 | Honda | Accord | 25th Anniversary Edition |
| 1994-1997 | Honda | Accord | DX |
| 1994-1997 | Honda | Accord | EX |
| 1994-1997 | Honda | Accord | LX |
| 1997 | Honda | Accord | SE |
| 1996-1997 | Honda | Accord | Value Package |
The MagnaFlow Street Series Cat-Back Performance Exhaust System 15684 brings out the personality of your Car with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Welded-On Single Wall Angle Cut Cut Edge tips, this Car exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Car's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15684 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15684 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno-proven performance
- Dyno Proven Performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1998-2002 | Chevrolet | Camaro | Z28 |
| 1998-2002 | Chevrolet | Camaro | Z28 SS |
| 1998-2002 | Pontiac | Firebird | Formula |
| 1998-2002 | Pontiac | Firebird | Trans Am |
The MagnaFlow 1994-1998 Ford Mustang Competition Series Cat-Back Performance Exhaust System 15677 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we're so well known for. This exhaust kit is designed to enhance your 4.6L, 5.0L 1994-1998 Ford Mustang with dyno-proven performance made possible thanks to fast-flowing mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Clamp-On Single Wall Angle Cut Cut Edge tips featuring a sporty finish. The exhaust system's cat-back layout replaces your ride's exhaust system from near the catalytic converter on back. Exhaust system 15677 is engineered to make your vehicle's engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 15677's direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow's limited lifetime warranty. Please check to ensure compliance with local noise regulations.
- Crafted From 409 Stainless Steel With All Mandrel-Bent Tubing
- Increased Horsepower And Torque
- Aggressive exterior sound
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1994-1998 | Ford | Mustang | GT |
| 1995 | Ford | Mustang | GTS |
| 1994-1998 | Ford | Mustang | SVT Cobra |
The MagnaFlow 1999-2004 Ford Mustang Street Series Cat-Back Performance Exhaust System 15671 brings out the personality of your 4.6L 1999-2004 Ford Mustang with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Clamp-On Single Wall Angle Cut Cut Edge tips, this Ford Mustang exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford Mustang's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15671 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15671 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno-proven performance
- Dyno Proven Performance
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1999-2004 | Ford | Mustang | GT |
| 2001 | Ford | Mustang | GT Bullitt |
| 2003-2004 | Ford | Mustang | Mach 1 |
Showing 330/1731
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.