Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Welcome to Atlus Automotive
Main menu
-
Performance
- Performance
-
Intake & Exhaust
- Intake & Exhaust
- Air Intake Systems
- Cold Air Intakes
- Air Intake Components
- Air Filters
- Air Filters - Drop In
- Air Filters - Direct Fit
- Air Filters - Universal Fit
- Pre-Filters
- Recharge Kits
- OE Replacement Air Intake Components
- Exhaust, Mufflers & Tips
- Catback
- Axle Back
- Muffler
- Tips
- Headers & Manifolds
- Connecting Pipes
- Catalytic Converter Direct Fit
- Catalytic Converter Universal
- Exhaust Collector
- Merge Collectors
-
Engine Upgrades
- Engine Upgrades
- Engine Components
- Camshafts
- Valve Springs, Retainers
- Head Gaskets
- Head Stud & Bolt Kits
- Main Stud & Bolt Kits
- Gasket Kits
- Engine Mounts
- Oil Catch Cans
- Oil Separators
- Throttle Bodies
- Throttle Body Spacers
- Crankshaft Dampers
- Valves
- Piston Rings
- Piston Sets - Forged - 4cyl
- Piston Sets - Cast - 4cyl
- Connecting Rods - 4Cyl
- Rotating Assemblies
- Stroker Kits
-
Turbo & Cooling
-
Fuel, Ignition & Tuning
-
Suspension & Handling
- Suspension & Handling
-
Lowering & Coilovers
-
Arms, Links & Alignment
-
Lift & Off-Road Suspension
-
Chassis & Bracing
-
Wheels & Tires
- Wheels & Tires
-
Wheels
-
Tires
-
Drivetrain & Clutch
-
Brakes
- Brakes
-
Pads & Rotors
-
Brake Kits & Calipers
-
Lines, Fluid & Hardware
-
Exterior & Lighting
- Exterior & Lighting
-
Lighting
-
Exterior Styling
-
Bumpers & Protection
-
Interior & Electronics
- Interior & Electronics
-
Interior Upgrades
-
Gauges & Electronics
-
Audio & Safety
-
Overland & Utility
- Overland & Utility
-
Bed Covers & Bed Gear
-
Steps, Racks & Storage
-
Trail & Towing
-
Maintenance & Garage
- Maintenance & Garage
-
Oil, Fluids & Filters
-
Detailing & Car Care
-
Tools & Fabrication
Your cart
Choose your Location
-
Atlus
1340 Cobb Dr, Unit 1, Eustis, FL 32736
352-234-4458
Mon – Fri: 8:30 am – 4:30 pm
Sat: 9:00 am – 2:00 pm
Sun: Closed
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
1736 products
1736 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$1,015.00
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2013-2015 | Ford | Focus | ST |
$1,620.00
$1,565.00
$2,450.00
$1,450.00
$905.00
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2002-2007 | Subaru | Impreza | WRX |
| 2006-2007 | Subaru | Impreza | WRX Limited |
| 2004-2007 | Subaru | Impreza | WRX STI |
| 2007 | Subaru | Impreza | WRX STI Limited |
| 2006-2007 | Subaru | Impreza | WRX TR |
$155.00
This system is constructed of 3 IN mandrel-bent 409 stainless steel tubing for maximum strength and durability. This system produces a throaty sound unleashing all available horsepower and torque. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment.
- All Necessary Hardware is Included for a Hassle-Free Installation
- Constructed from 3 IN Mandrel-Bent 409 Stainless Steel Tubing
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2020-2021,2023 | Chevrolet | Silverado 1500 | Custom Trail Boss |
| 2020-2026 | Chevrolet | Silverado 1500 | High Country |
| 2020-2026 | Chevrolet | Silverado 1500 | LT Trail Boss |
| 2020-2026 | Chevrolet | Silverado 1500 | LTZ |
| 2020-2026 | Chevrolet | Silverado 1500 | RST |
| 2022-2026 | Chevrolet | Silverado 1500 | ZR2 |
| 2020-2026 | GMC | Sierra 1500 | AT4 |
| 2022-2026 | GMC | Sierra 1500 | AT4X |
| 2020-2026 | GMC | Sierra 1500 | Denali |
| 2022-2026 | GMC | Sierra 1500 | Denali Ultimate |
| 2020-2026 | GMC | Sierra 1500 | SLT |
$236.00
This exhaust exhaust system is constructed of 3 IN mandrel-bent 409 stainless steel tubing for maximum strength and durability. This system features a high-flow 409 stainless steel muffler, producing a throaty sound. This system produces a throaty sound unleashing all available horsepower and torque. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. 100% MIG-Welded for race-proven strength and durability.
- All Necessary Hardware is Included for a Hassle-Free Installation
- Constructed from 3 IN Mandrel-Bent 409 Stainless Steel Tubing
- Utilizes High-Flow 409 Stainless Steel Muffler
- 100% MIG-Welded for Strength and Durability
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2020-2021,2023 | Chevrolet | Silverado 1500 | Custom Trail Boss |
| 2020-2026 | Chevrolet | Silverado 1500 | High Country |
| 2020-2026 | Chevrolet | Silverado 1500 | LT Trail Boss |
| 2020-2026 | Chevrolet | Silverado 1500 | LTZ |
| 2020-2026 | Chevrolet | Silverado 1500 | RST |
| 2022-2026 | Chevrolet | Silverado 1500 | ZR2 |
| 2020-2026 | GMC | Sierra 1500 | AT4 |
| 2022-2026 | GMC | Sierra 1500 | AT4X |
| 2020-2026 | GMC | Sierra 1500 | Denali |
| 2022-2026 | GMC | Sierra 1500 | Denali Ultimate |
| 2020-2026 | GMC | Sierra 1500 | SLT |
$144.00
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2021 | Chevrolet | Silverado 1500 | Custom |
| 2019-2026 | Chevrolet | Silverado 1500 | Custom Trail Boss |
| 2019-2026 | Chevrolet | Silverado 1500 | High Country |
| 2019-2026 | Chevrolet | Silverado 1500 | LT |
| 2019-2026 | Chevrolet | Silverado 1500 | LT Trail Boss |
| 2019-2026 | Chevrolet | Silverado 1500 | LTZ |
| 2023-2026 | Chevrolet | Silverado 1500 | PPV |
| 2019-2026 | Chevrolet | Silverado 1500 | RST |
| 2019-2021 | Chevrolet | Silverado 1500 | SSV |
| 2019-2026 | Chevrolet | Silverado 1500 | WT |
| 2019-2021 | GMC | Sierra 1500 | AT4 |
| 2019-2021 | GMC | Sierra 1500 | Base |
| 2019-2026 | GMC | Sierra 1500 | Denali |
| 2019-2026 | GMC | Sierra 1500 | Elevation |
| 2022-2026 | GMC | Sierra 1500 | Pro |
| 2019-2026 | GMC | Sierra 1500 | SLE |
| 2019-2026 | GMC | Sierra 1500 | SLT |
$252.00
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2021 | Chevrolet | Silverado 1500 | Custom |
| 2019-2026 | Chevrolet | Silverado 1500 | Custom Trail Boss |
| 2019-2026 | Chevrolet | Silverado 1500 | High Country |
| 2019-2026 | Chevrolet | Silverado 1500 | LT |
| 2019-2026 | Chevrolet | Silverado 1500 | LT Trail Boss |
| 2019-2026 | Chevrolet | Silverado 1500 | LTZ |
| 2023-2026 | Chevrolet | Silverado 1500 | PPV |
| 2019-2026 | Chevrolet | Silverado 1500 | RST |
| 2019-2021 | Chevrolet | Silverado 1500 | SSV |
| 2019-2026 | Chevrolet | Silverado 1500 | WT |
| 2019-2021 | GMC | Sierra 1500 | AT4 |
| 2019-2021 | GMC | Sierra 1500 | Base |
| 2019-2026 | GMC | Sierra 1500 | Denali |
| 2019-2026 | GMC | Sierra 1500 | Elevation |
| 2022-2026 | GMC | Sierra 1500 | Pro |
| 2019-2026 | GMC | Sierra 1500 | SLE |
| 2019-2026 | GMC | Sierra 1500 | SLT |
$144.00
This system is constructed of 3 IN mandrel-bent 409 stainless steel tubing for maximum strength and durability. Free-flowing, 3 IN stainless steel tubing replaces the stock muffler producing a deeper, more powerful sound. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment.
- Completely remove your truck's muffler and swap in a high-flow delete pipe for an aggressive tone.
- All Necessary Hardware is Included for a Hassle-Free Installation
- Constructed from 3 IN Mandrel-Bent 409 Stainless Steel Tubing
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2020 | Chevrolet | Silverado 1500 | Custom Trail Boss |
| 2019-2020 | Chevrolet | Silverado 1500 | High Country |
| 2020 | Chevrolet | Silverado 1500 | LT Trail Boss |
| 2019-2020 | Chevrolet | Silverado 1500 | LTZ |
| 2020 | Chevrolet | Silverado 1500 | RST |
| 2019-2020 | GMC | Sierra 1500 | AT4 |
| 2019-2020 | GMC | Sierra 1500 | Denali |
| 2019-2020 | GMC | Sierra 1500 | SLT |
$328.00
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2009-2010 | Dodge | Ram 1500 | Laramie |
| 2009-2010 | Dodge | Ram 1500 | SLT |
| 2009-2010 | Dodge | Ram 1500 | Sport |
| 2009-2010 | Dodge | Ram 1500 | ST |
| 2009-2010 | Dodge | Ram 1500 | TRX |
| 2009-2010 | Dodge | Ram 1500 | TRX4 |
| 2011-2018 | Ram | 1500 | Big Horn |
| 2012-2018 | Ram | 1500 | Express |
| 2014 | Ram | 1500 | HFE |
| 2011-2018 | Ram | 1500 | Laramie |
| 2014-2015 | Ram | 1500 | Laramie Limited |
| 2011-2018 | Ram | 1500 | Laramie Longhorn |
| 2015-2018 | Ram | 1500 | Limited |
| 2014-2018 | Ram | 1500 | Lone Star |
| 2011-2016 | Ram | 1500 | Outdoorsman |
| 2013 | Ram | 1500 | R/T |
| 2015-2018 | Ram | 1500 | Rebel |
| 2011-2018 | Ram | 1500 | SLT |
| 2014-2018 | Ram | 1500 | Special Service |
| 2011-2018 | Ram | 1500 | Sport |
| 2011-2012 | Ram | 1500 | ST |
| 2011-2018 | Ram | 1500 | Tradesman |
| 2019 | Ram | 1500 Classic | Big Horn |
| 2019 | Ram | 1500 Classic | Express |
| 2019 | Ram | 1500 Classic | Lone Star |
| 2019 | Ram | 1500 Classic | SLT |
| 2019 | Ram | 1500 Classic | Special Service |
| 2019 | Ram | 1500 Classic | Tradesman |
| 2019 | Ram | 1500 Classic | Warlock |
$112.00
Bring the maximum power out of your exhaust with the aFe Power Muffler-Delete Pipe. This pipe is constructed out of 409 stainless steel and is used to eliminate the 4" In/Out muffler used in most factory or performance 4" exhaust systems. You will love the aggressive exhaust note of a 4" system with no muffler while maximizing exhaust flow, throttle response and performance.
- Pipe Specifications: 4" ID Inltet/Outlet x 30" Overall Length
- Stainless Steel Muffler Delete Pipe
- 2 Year Limited Warranty
$88.00
Bring the maximum power out of your exhaust with the aFe Power Muffler-Delete Pipe. This pipe is constructed out of aluminized steel and is used to eliminate the 4 In/Out muffler used in most factory or performance 4 exhaust systems. You will love the aggressive exhaust note of a 4 system with no muffler while maximizing exhaust flow, throttle response and performance.
- Pipe Specifications: 4" ID Inltet/Outlet x 30" Overall Length
- Improves Throttle Response And Performance
- Brings Maximum Power Out Of Your Exhaust
- This Pipe Fits Most 4 in Exhaust Systems
- Adds An Aggressive Tone To Your Exhaust
- Maximizes Exhaust Flow
$500.00
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021 | Jeep | Gladiator | 80th Anniversary |
| 2020,2022 | Jeep | Gladiator | Altitude |
| 2023 | Jeep | Gladiator | Freedom |
| 2021-2023 | Jeep | Gladiator | High Altitude |
| 2024-2025 | Jeep | Gladiator | High Tide |
| 2024 | Jeep | Gladiator | Jeep Beach |
| 2020 | Jeep | Gladiator | Launch Edition |
| 2020-2025 | Jeep | Gladiator | Mojave |
| 2024-2025 | Jeep | Gladiator | Mojave X |
| 2024-2025 | Jeep | Gladiator | NightHawk |
| 2020-2023 | Jeep | Gladiator | Overland |
| 2020-2025 | Jeep | Gladiator | Rubicon |
| 2024-2025 | Jeep | Gladiator | Rubicon X |
| 2020-2025 | Jeep | Gladiator | Sport |
| 2020-2025 | Jeep | Gladiator | Sport S |
| 2021-2025 | Jeep | Gladiator | Texas Trail |
| 2021-2025 | Jeep | Gladiator | Willys |
| 2021-2023 | Jeep | Gladiator | Willys Sport |
$500.00
This durable, purpose-built, cat-back exhaust system improves clearance over rough terrain for the Jeep JK adventurist who wants it all. Large, 2 ½" to 3" mandrel-bent 409 stainless steel tubing outflows the restrictive OE exhaust to increase torque and horsepower while a free-flowing muffler delivers a powerful, performance tone. The ROCK BASHER'S unique pre-axle turn down tip handles off-road obstacles and utilizes factory mounts for a qui ck and simple install. This cat-back exhaust system has a turn down tip under the vehicle, before the rear axle, to take on rough terrain and off-road obstacles. No more smashed tips. An 18" long, free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound whi le unleashing all available horsepower and torque.
- Free Flowing Stainless Steel Muffler
- Hassle Free Installation
- MIG Welded For Strength
- Steel Band Clamps
- Aggressive Sound
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2011 | Jeep | Wrangler | Unlimited 70th Anniversary |
| 2016 | Jeep | Wrangler | Unlimited 75th Anniversary |
| 2007-2017 | Jeep | Wrangler | Unlimited Rubicon |
| 2007-2017 | Jeep | Wrangler | Unlimited Sahara |
| 2010-2017 | Jeep | Wrangler | Unlimited Sport |
| 2016 | Jeep | Wrangler | Unlimited Sport S |
| 2007-2010 | Jeep | Wrangler | Unlimited X |
| 2018 | Jeep | Wrangler JK | Unlimited Rubicon |
| 2018 | Jeep | Wrangler JK | Unlimited Sahara |
| 2018 | Jeep | Wrangler JK | Unlimited Sport |
| 2018 | Jeep | Wrangler JK | Unlimited Sport S |
$884.00
aFe's Rebel Series, dual polished tip cat-back exhaust system for your 2007 - 2018 Jeep Wrangler (JK) with the V6-3.8L / 3.6L engine. This Rebel Series system is constructed with 2-1/2" mandrel bent 409 stainless steel tubing for improved exhaust flow. Utilizing factory mounting locations, the bayonet tip hangers ensure the Rebel Series exhaust has an OE-style fit and stays put under any driving conditions. A certified craftsman hand MIG welds the system for durability and longevity. High quality band clamps and hardware to provide a quick, hassle-free installation with no modifications necessary. Dual 4-1/2" angle-cut, polished stainless steel exhaust tips are badged with laser-cut aFe POWER plates to finish off the Rebel Series exhaust system for the perfect combination of performance, value and style. Additional Performance: Compatible with aFe Power Twisted Steel Down-Pipe Loop Relocation Pipe (48-48022-HN or 48-48022-HC) to optimize your performance gain. Mild Tone: A free-flowing, sta inless steel, rear muffler assembly, engineered for the smoothest sounding performance available. A 14" long, round front muffler assembly is used to absorb the high pitch tones. The rear, 18" long, oval muffler is used to producing a powerful sound and unleashing more horsepower and torque potential. Dual 4-1/2" Polished Exhaust Tips This dual rear-exit system features 4-1/2" dia. polished, angle-cut, rolled, stainless steel exhaust tips w/ laser-cut aFe POWER badge for a custom-styled look. Installation is a snap: This Rebel Series exhaust system uses all factory mounting locations providing stability and a hassle-free installation. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during any driving conditions. The bayonet tip holds the hanger bushing in place for an OE style, long lasting fit. Leak-Free Seal: High quality band clamps are used for a complete 360-degree sealing surface.
- Dual Muffler System For Smoothest Sounding Performance
- Long Round Front Muffler and Long Oval Rear Muffler
- High Quality Hardware and Clamps
- Mandrel Bent Stainless Steel
- Dual Rear Exit Exhaust Tips
- 100 Percent Hand MIG-Welded
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2011 | Jeep | Wrangler | 70th Anniversary |
| 2016 | Jeep | Wrangler | 75th Anniversary |
| 2007-2017 | Jeep | Wrangler | Rubicon |
| 2007-2017 | Jeep | Wrangler | Sahara |
| 2010-2017 | Jeep | Wrangler | Sport |
| 2016 | Jeep | Wrangler | Sport S |
| 2011 | Jeep | Wrangler | Unlimited 70th Anniversary |
| 2016 | Jeep | Wrangler | Unlimited 75th Anniversary |
| 2007-2017 | Jeep | Wrangler | Unlimited Rubicon |
| 2007-2017 | Jeep | Wrangler | Unlimited Sahara |
| 2010-2017 | Jeep | Wrangler | Unlimited Sport |
| 2016 | Jeep | Wrangler | Unlimited Sport S |
| 2007-2010 | Jeep | Wrangler | Unlimited X |
| 2007-2010 | Jeep | Wrangler | X |
| 2018 | Jeep | Wrangler JK | Rubicon |
| 2018 | Jeep | Wrangler JK | Sahara |
| 2018 | Jeep | Wrangler JK | Sport |
| 2018 | Jeep | Wrangler JK | Sport S |
| 2018 | Jeep | Wrangler JK | Unlimited Rubicon |
| 2018 | Jeep | Wrangler JK | Unlimited Sahara |
| 2018 | Jeep | Wrangler JK | Unlimited Sport |
| 2018 | Jeep | Wrangler JK | Unlimited Sport S |
$1,099.00
aFe's Rebel Series, dual black tip cat-back exhaust system for your 2007 - 2018 Jeep Wrangler (JK) with the V6-3.8L / 3.6L engine. This Rebel Series system is constructed with 2-1/2" mandrel bent 409 stainless steel tubing for improved exhaust flow. Utilizing factory mounting locations, the bayonet tip hangers ensure the Rebel Series exhaust has an OE-style fit and stays put under any driving conditions. A certified craftsman hand MIG welds the system for durability and longevity. High quality band clamps and hardware to provide a quick, hassle-free installation with no modifications necessary. Dual 4-1/2" angle-cut, black stainless steel exhaust tips are badged with laser-cut aFe POWER plates to finish off the Rebel Series exhaust system for the perfect combination of performance, value and style. Additional Performance: Compatible with aFe Power Twisted Steel Down-Pipe Loop Relocation Pipe (48-48022-HN or 48-48022-HC) to optimize your performance gain. Mild Tone A free-flowing, stainless steel, high temp metallic black, rear muffler assembly, engineered for the smoothest sounding performance available. A 14" long, round front muffler assembly is used to absorb the high pitch tones. The rear, 18" long, oval muffler is used to producing a powerful sound and unleashing more horsepower and torque potential. Dual 4-1/2" Black Exhaust Tips: This dual rear-exit system features 4-1/2" dia. high temp metallic black, angle-cut, rolled, stainless steel exhaust tips w/ laser-cut aFe POWER badge for a custom-styled look. Installation is a snap: This Rebel Series exhaust system uses all factory mounting locations providing stability and a hassle-free installation. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during any driving conditions. The bayonet tip holds the hanger bushing in place for an OE style, long lasting fit. Leak-Free Seal: High quality band clamps are used for a complete 360-degree sealing surface.
- Dual Muffler System For Smoothest Sounding Performance
- Long Round Front Muffler and Long Oval Rear Muffler
- High Quality Hardware and Clamps
- Mandrel Bent Stainless Steel
- Dual Rear Exit Exhaust Tips
- 100 Percent Hand MIG-Welded
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2011 | Jeep | Wrangler | 70th Anniversary |
| 2016 | Jeep | Wrangler | 75th Anniversary |
| 2007-2017 | Jeep | Wrangler | Rubicon |
| 2007-2017 | Jeep | Wrangler | Sahara |
| 2010-2017 | Jeep | Wrangler | Sport |
| 2016 | Jeep | Wrangler | Sport S |
| 2011 | Jeep | Wrangler | Unlimited 70th Anniversary |
| 2016 | Jeep | Wrangler | Unlimited 75th Anniversary |
| 2007-2017 | Jeep | Wrangler | Unlimited Rubicon |
| 2007-2017 | Jeep | Wrangler | Unlimited Sahara |
| 2010-2017 | Jeep | Wrangler | Unlimited Sport |
| 2016 | Jeep | Wrangler | Unlimited Sport S |
| 2007-2010 | Jeep | Wrangler | Unlimited X |
| 2007-2010 | Jeep | Wrangler | X |
| 2018 | Jeep | Wrangler JK | Rubicon |
| 2018 | Jeep | Wrangler JK | Sahara |
| 2018 | Jeep | Wrangler JK | Sport |
| 2018 | Jeep | Wrangler JK | Sport S |
| 2018 | Jeep | Wrangler JK | Unlimited Rubicon |
| 2018 | Jeep | Wrangler JK | Unlimited Sahara |
| 2018 | Jeep | Wrangler JK | Unlimited Sport |
| 2018 | Jeep | Wrangler JK | Unlimited Sport S |
$619.00
The Hi-Tuck "Rock Basher" Cat-Back Exhaust System is constructed of 2-1/2" mandrel-bent stainless steel tubing. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower, torque and throttle response. This exhaust system also comes complete with a 14" length high-flow straight through designed muffler to absorb high pitch tones producing a powerful sound. All necessary hardware is included for a hassle-free installation. This unit fits with most after market Evap skid plates. This MACH Force-Xp cat-back exhaust system is constructed of 2-1/2" mandrel-bent, 409 stainless steel tubing for maximum flow. The smooth transition bends allow for low turbulence, increasing horsepower, torque and improving throttle response. This system incorporates a high flow 14" length muffler for an aggressive sound. The muffler is located prior to the rear axle for increased climbing angles. This system may have a slight drone in some applications due to the short muffler. This exhaust system is finished off with a Hi-Tuck Tip that is developed to give your Jeep extra clearance during extreme angle climbs or descents. An included extension pipe allows this system to fit both the 2 and 4 door Wranglers without modification. OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time. The 409 stainless steel performance muffler is designed to provide a deep, throaty, powerful sound on acceleration but maintain a smooth sound at idle. The driver-side exit location is perfect for adding on-board air compressor system to the underside of your Jeep. If you are considering an on-board air compressor kit, you need to use this system. Compatible with aFe Power's Glide Guard (46-79001)
- Utilizes a high-flow 409 stainless steel straight through designed muffler
- Comes complete with all necessary hardware for a hassle-free installation
- Features a Hi-Tuck design to provide maximum clearance when off roading
- Uses bayonet style hangers and heavy-duty band clamps for a secure fit
- Constructed out of 2-1/2" mandrel bent stainless steel tubing
- Fits with most aftermarket Evap skid plates
- Single rear exit system
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2011 | Jeep | Wrangler | 70th Anniversary |
| 2016 | Jeep | Wrangler | 75th Anniversary |
| 2007-2017 | Jeep | Wrangler | Rubicon |
| 2007-2017 | Jeep | Wrangler | Sahara |
| 2010-2017 | Jeep | Wrangler | Sport |
| 2016 | Jeep | Wrangler | Sport S |
| 2011 | Jeep | Wrangler | Unlimited 70th Anniversary |
| 2016 | Jeep | Wrangler | Unlimited 75th Anniversary |
| 2007-2017 | Jeep | Wrangler | Unlimited Rubicon |
| 2007-2017 | Jeep | Wrangler | Unlimited Sahara |
| 2010-2017 | Jeep | Wrangler | Unlimited Sport |
| 2016 | Jeep | Wrangler | Unlimited Sport S |
| 2007-2010 | Jeep | Wrangler | Unlimited X |
| 2007-2010 | Jeep | Wrangler | X |
| 2018 | Jeep | Wrangler JK | Rubicon |
| 2018 | Jeep | Wrangler JK | Sahara |
| 2018 | Jeep | Wrangler JK | Sport |
| 2018 | Jeep | Wrangler JK | Sport S |
| 2018 | Jeep | Wrangler JK | Unlimited Rubicon |
| 2018 | Jeep | Wrangler JK | Unlimited Sahara |
| 2018 | Jeep | Wrangler JK | Unlimited Sport |
| 2018 | Jeep | Wrangler JK | Unlimited Sport S |
$796.00
The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 IN 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 IN long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.
- 2.5 IN Mandrel Bent 409 Stainless Steel Tubing
- Factory Hanger Locations
- Hassle Free Installation
- 100% Hand MIG Welded
- Maximum Flow
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2012-2014 | Volkswagen | Passat | TDI SE |
| 2012-2013 | Volkswagen | Passat | TDI SEL |
| 2014 | Volkswagen | Passat | TDI SEL Premium |
$796.00
The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.
- 2.5 IN Mandrel Bent 409 Stainless Steel Tubing
- Polished Stainless Tip Included
- Requires Cutting To Install
- OE Style/Welded-On Hangers
- 2 Year Limited Warranty
- 2 Piece Design
- Maximum Flow
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2011-2014 | Volkswagen | Golf | TDI |
| 2011 | Volkswagen | Jetta | Base |
| 2012-2014 | Volkswagen | Jetta | GLI |
| 2011-2014 | Volkswagen | Jetta | S |
| 2011-2014 | Volkswagen | Jetta | TDI |
| 2012-2014 | Volkswagen | Jetta | TDI Premium |
$796.00
The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 IN 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 IN long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.
- 2.5 IN Mandrel Bent 409 Stainless Steel Tubing
- Polished Stainless Tip Included
- Requires Cutting To Install
- OE Style/Welded-On Hangers
- 2 Piece Design
- Maximum Flow
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2011 | Volkswagen | Jetta | Base |
| 2012-2014 | Volkswagen | Jetta | GLI |
| 2011-2014 | Volkswagen | Jetta | S |
| 2011-2014 | Volkswagen | Jetta | TDI |
| 2012-2014 | Volkswagen | Jetta | TDI Premium |
$1,532.00
The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.
- 2.25 in. Mandrel Bent 409 Stainless Steel Tubing
- 304 Double Wall Angle Cut Resonated Tips
- True Dual In Dual Out High Flow Muffler
- No Modification Necessary
- Hassle Free Installation
- Factory Hanger Locations
- 100% Hand MIG Welded
- Maximum Flow
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2001-2005 | BMW | 325Ci | Base |
| 2001-2006 | BMW | 325i | Base |
| 2001-2005 | BMW | 330Ci | Base |
| 2001-2006 | BMW | 330i | Base |
$1,268.00
aFe Power introduces an all new Rebel Series dual middle-side exit exhaust system for the 2016-2017 Nissan Titan with V8-5.6L engine. This Rebel Series cat-back is designed with dual black exhaust tips that exit in front of the rear passenger tire for a unique, aggressive look. The tips come with unique laser-etched aFe Power logos on the side and are constructed from stainless steel for durability. The exhaust system is constructed from 2-1/2" MIG-welded, mandrel bent stainless steel tubing for maximum flow, increased horsepower and torque. This kit uses a free-flowing muffler to absorb high pitch tones producing a powerful sound. The performance cat-back exhaust system includes necessary hardware and clamps for a hassle-free install, with no cutting required making it a true bolt on system.
- Unique Dual 3.5 in. Black Stainless Steel Tips
- 2.5 in. Mandrel Bent Stainless Steel Tubing
- Bayonet Style Hangers For Secure Fit
- Complete w/Necessary Hardware
- Dual Mid-Side Exit System
- High Flow Muffler
- Aggressive Sound
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2024 | Nissan | TITAN | Platinum Reserve |
| 2017-2024 | Nissan | TITAN | PRO-4X |
| 2017-2023 | Nissan | TITAN | S |
| 2017-2021 | Nissan | TITAN | SL |
| 2017-2024 | Nissan | TITAN | SV |
| 2016-2018 | Nissan | TITAN XD | Platinum Reserve |
| 2016-2018 | Nissan | TITAN XD | PRO-4X |
| 2016-2018 | Nissan | TITAN XD | S |
| 2016-2018 | Nissan | TITAN XD | SL |
| 2016-2018 | Nissan | TITAN XD | SV |
$884.00
This MACH Force-Xp Cat-Back exhaust system is constructed of 2-1/2" to 3-1/2" mandrel-bent 409 stainless steel and comes complete with free-flowing muffler, tubing, OE style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. This system is finished off with a 304 stainless steel polished tip that creates the aggressive, high quality look your Titan needs.
- High Flow Stainless Steel Dual-In To Single-Out Muffler
- 2.5 in. To 3.5 in. Mandrel Bent Stainless Steel Tubing
- Single 4.5 in. Polished Stainless Steel Tip
- Bayonet Style Hangers For Secure Fit
- Complete w/Necessary Hardware
- Single Side Exit
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2024 | Nissan | TITAN | Platinum Reserve |
| 2017-2024 | Nissan | TITAN | PRO-4X |
| 2017-2023 | Nissan | TITAN | S |
| 2017-2021 | Nissan | TITAN | SL |
| 2017-2024 | Nissan | TITAN | SV |
| 2016-2019 | Nissan | TITAN XD | Platinum Reserve |
| 2016-2019 | Nissan | TITAN XD | PRO-4X |
| 2016-2019 | Nissan | TITAN XD | S |
| 2016-2019 | Nissan | TITAN XD | SL |
| 2016-2019 | Nissan | TITAN XD | SV |
$953.00
This MACH Force-Xp Cat-Back exhaust system is constructed of 2-1/2" to 3-1/2" mandrel-bent 409 stainless steel and comes complete with free-flowing muffler, tubing, OE style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. This system is finished off with a 304 stainless steel polished tip that creates the aggressive, high quality look your Titan needs.
- High Flow Stainless Steel Dual-In To Single-Out Muffler
- 2.5 in. To 3.5 in. Mandrel Bent Stainless Steel Tubing
- Single 4.5 in. Black Stainless Steel Tip
- Bayonet Style Hangers For Secure Fit
- Complete w/Necessary Hardware
- Single Side Exit
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2024 | Nissan | TITAN | Platinum Reserve |
| 2017-2024 | Nissan | TITAN | PRO-4X |
| 2017-2023 | Nissan | TITAN | S |
| 2017-2021 | Nissan | TITAN | SL |
| 2017-2024 | Nissan | TITAN | SV |
| 2016-2019 | Nissan | TITAN XD | Platinum Reserve |
| 2016-2019 | Nissan | TITAN XD | PRO-4X |
| 2016-2019 | Nissan | TITAN XD | S |
| 2016-2019 | Nissan | TITAN XD | SL |
| 2016-2019 | Nissan | TITAN XD | SV |
$1,209.00
aFe Power introduces an all new Rebel Series dual middle-side exit exhaust system for the 2004-2015 Nissan Titan with V8-5.6L engine. This Rebel Series cat-back is designed with dual black exhaust tips that exit in front of the rear passenger tire for a unique, aggressive look. The tips come with unique laser-etched aFe Power logos on the side and are constructed from stainless steel for durability. The exhaust system is constructed from 2-1/2" MIG-welded, mandrel bent stainless steel tubing for maximum flow, increased horsepower and torque. This kit uses a free-flowing muffler to absorb high pitch tones producing a powerful sound. The performance cat-back exhaust system includes necessary hardware and clamps for a hassle-free install, with no cutting required making it a true bolt on system. 3-1/2" Dia. Black Middle-Side Exit Tips: Finishing off the exhaust are dual 3-1/2" diameter black 304 stainless steel clamp-on tips with a laser-etched aFe power logo on the side for an aggressive style. The tips are designed to exit from in front of the rear passenger side tire for a unique custom look. Installation Is A Snap: This Rebel Series exhaust system uses factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. This makes for an easy installation with no cutting required.
- Middle Exit Dual Polished Stainless Steel Tips w/aFe Power Logo
- High Flow Stainless Steel Dual-In To Single-Out Muffler
- Bayonet Style Hangers For Secure Fit
- Mandrel Bent Stainless Steel Tubing
- Complete w/Necessary Hardware
- Heavy Duty Band Clamps
- Passenger Side Exit
- Aggressive Sound
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2004-2010 | Nissan | TITAN | LE |
| 2008-2015 | Nissan | TITAN | PRO-4X |
| 2011-2015 | Nissan | TITAN | S |
| 2004-2010 | Nissan | TITAN | SE |
| 2011-2015 | Nissan | TITAN | SL |
| 2011-2015 | Nissan | TITAN | SV |
| 2004-2010 | Nissan | TITAN | XE |
$858.00
Creates maximum performance and extreme mileage gains. The free flowing rear side exit exhaust system is constructed out of 2.25 in. mandrel bent 409 stainless steel and uses bayonet style hangers and band clamps for a hassle free installation. Uses all factory mounting locations providing stability and a hassle free installation. High quality OE style flange and band clamps are used for a complete 360 deg. sealing surface eliminating leak paths. A straight through designed; free flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.
- Mandrel Bent 409 Stainless Steel Tubing
- Hassle Free Installation
- OE Hanger Locations
- Free-Flow Muffler
- Aggressive Sound
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2005-2010 | Nissan | Xterra | Off-Road |
| 2011-2015 | Nissan | Xterra | PRO-4X |
| 2005-2015 | Nissan | Xterra | S |
| 2005-2010 | Nissan | Xterra | SE |
| 2006-2015 | Nissan | Xterra | X |
$884.00
The Mach Force XP cat-back exhaust system produces 11 hp and 10 lbs./ft. of torque. constructed from 2.75 in. mandrel bent 304 hand brushed stainless steel and utilizes a unique crossover pipe that helps to equalize exhaust pressure and tunes the exhaust pulse. Comes with dual 3.5 in. polished 304 stainless steel tips and muffler to build a mellow yet powerful sound. Engineered and manufactured in our Corona Ca manufacturing facility. All systems use factory mounting locations providing stability and hassle-free installation. High quality band clamps are used for a complete 360 deg. sealing surface. A free flowing muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. The crossover balance tube equalizes and evenly distributes exhaust pulses traveling through the exhaust system. This not only creates more efficient flow and better performance it also reduces sound decibels ultimately minimizing exhaust drone.
- Dual 4 in. Round Polished 304 Stainless Steel Tips
- Mandrel Bent 409 Stainless Steel Tubing
- High Flow Stainless Steel Muffler
- No Modification Necessary
- Hassle Free Installation
- 2 Year Limited Warranty
- Includes All Hardware
- 100% Hand TIG Welded
- Hand Brushed Teeth
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2013-2019 | Nissan | Frontier | Desert Runner |
| 2005-2010 | Nissan | Frontier | LE |
| 2005-2008 | Nissan | Frontier | Nismo Off-Road |
| 2009-2019 | Nissan | Frontier | PRO-4X |
| 2011-2019 | Nissan | Frontier | S |
| 2005-2010 | Nissan | Frontier | SE |
| 2011-2019 | Nissan | Frontier | SL |
| 2011-2019 | Nissan | Frontier | SV |
$734.00
This cat-back exhaust system is constructed of 2-1/2 IN mandrel-bent 409 stainless steel tubing for maximum strength and durability. This system features a high-flow 409 stainless steel muffler, producing a deep sound. This system produces a deep sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. This cat-back exhaust system is finished off with a hi-tuck tip that is developed to give you extra clearance during extreme angle climbs or descents protecting exhaust over rough terrain. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.
- Hi-Tuck Design for Extra Ground Clearance, Protects Exhaust Over Rough Terrain
- Constructed from 2-1/2 IN Mandrel-Bent 409 Stainless Steel Tubing
- Acoustically Tuned Expansion Chamber for a Deep Exhaust Tone
- Utilizes Factory Style Flange and Hangers for a Secure Fit
- 100% MIG-Welded for Strength and Durability
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2025-2026 | Toyota | 4Runner | Limited |
| 2025-2026 | Toyota | 4Runner | Platinum |
| 2025-2026 | Toyota | 4Runner | SR5 |
| 2025-2026 | Toyota | 4Runner | Trailhunter |
| 2025-2026 | Toyota | 4Runner | TRD Off-Road |
| 2025-2026 | Toyota | 4Runner | TRD Off-Road Premium |
| 2025-2026 | Toyota | 4Runner | TRD Pro |
| 2025-2026 | Toyota | 4Runner | TRD Sport |
| 2025-2026 | Toyota | 4Runner | TRD Sport Premium |
Showing 1650/1736
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.