This cat-back exhaust system is constructed of 3 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel polished muffler, producing a aggressive sound. Finishing off this exhaust system are dual 5 IN diameter black 304 stainless steel clamp-on exhaust tips. The tips features a laser etched Takeda logo for a unique style. This system produces an aggressive sound unleashing all available horsepower and torque. Utilizing factory style flanges and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. This system incorporates a factory style exhaust valve which use the factory exhaust valve motor (not included). The valve helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance. A mitered merge is used to decrease turbulence and increase exhaust velocity resulting in increased horsepower, torque and improved throttle response. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability. This system features a 4" x 16" 304 stainless steel resonator to reduce drone. An optional resonator delete pipe is available (PN 49M10007)

• Includes Factory Style Exhaust Valve (Using Factory Motor, Not Included)
• Dual 5 IN Diameter Black 304 Stainless Steel Clamp-On Exhaust Tips
• Constructed from 3 IN Mandrel-Bent 304 Stainless Steel Tubing
• Utilizes Factory Style Flanges and Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability
• Optional Resonator Delete Available

This Part Fits:

This system features high-flow stainless steel mufflers, producing a deep sound while unleashing all available horsepower and torque. Utilizing factory style flanges and hangers, this system is a direct bolt-on which requires no cutting or modifications for a hassle-free installation. A mitered merge x-pipe is used to balance and evenly distribute exhaust pulses traveling through the exhaust system, minimizing exhaust drone and maximizing scavenging. This system features an electronically controlled exhaust cutout valve to quickly switch between exhaust tones at the push of a button. Included in this kit are two key fob remotes, control module, valve motor, and all necessary wiring to provide a simple installation which requiring no cutting of any wires, or interference of the automobile's electronics. A mitered merge is used to decrease turbulence and increase exhaust velocity resulting in increased horsepower, torque and improved throttle response. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.

• Includes Electronically Controlled Valve Before the Exhaust Muffler to Quickly Switch Between Mild and Aggressive with the Push of a Button
• Utilizes Factory Style Flanges and Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

This cat-back exhaust system is constructed of 3 IN - 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features high-flow 304 stainless steel mufflers, producing a deep sound. This system produces a deep sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. This kit includes key fob remotes, control module, valve motor, and all necessary wiring. It's a simple installation, requiring no cutting of any wires or interference of the automobile's electronics. This system features an electronically controlled exhaust cutout valve to quickly switch between exhaust tones at the push of a button. A formed collector is used to decrease turbulence and increase exhaust velocity resulting in increased horsepower, torque and improved throttle response. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.

• Includes Electronically Controlled Valve Before the Exhaust Muffler to Quickly Switch Between Mild and Aggressive with the Push of a Button
• Utilizes Factory Style Flange and Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

This system produced gains of up to +5 HP and +7 lbs. x Ft. TQ., as measured on our in-house dyno. This cat-back exhaust system is constructed of 2-1/2" mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel muffler, producing a throaty sound. Finishing off this exhaust system are dual 4-1/2" diameter polished 304 stainless steel clamp-on exhaust tips. The tips features a laser etched Takeda logo for a unique style. This system produces a throaty sound unleashing all available horsepower and torque. Some cutting will be required, see instruction sheet for further information. Utilizing factory style flanges and hangers this system mounts directly to factory mounting locations for a hassle-free installation.A mitered merge collector is used to decrease turbulence and increase exhaust velocity resulting in increased horsepower, torque and improved throttle response. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. 100% MIG-Welded for race-proven strength and durability.

• Dual 4-1/2" Diameter Polished 304 Stainless Steel Clamp-On Exhaust Tips
• All Necessary Hardware is Included for a Hassle-Free Installation
• Constructed from 2-1/2" Mandrel-Bent 304 Stainless Steel Tubing
• Utilizes Factory Style Flanges and Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability
• Up to +5 HP and +7 lbs. x Ft. TQ.
• Must Cut OE Exhaust

This Part Fits:

This system produced gains of up to +12 HP and +15 lbs. x Ft. TQ., as measured on our in-house dyno. This cat-back exhaust system is constructed of 3 IN - 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel muffler, producing a mild sound. This system produces a mild sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. This cat-back exhaust system uses a heavy duty flex pipe with an internal interlock liner for added strength and durability. A mitered merge collector is used to decrease turbulence and increase exhaust velocity resulting in increased horsepower, torque and improved throttle response. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. 100% MIG-Welded for race-proven strength and durability.

• Constructed from 3 IN - 2-1/2 IN Mandrel-Bent 304 Stainless Steel Tubing
• Utilizes Factory Style Flange and Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability
• Up to +12 HP and +15 lbs. x Ft. TQ.

This Part Fits:

This cat-back exhaust system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel muffler, producing a deep sound. This system produces a deep sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. This cat-back exhaust system is finished off with a hi-tuck tip that is developed to give you extra clearance during extreme angle climbs or descents protecting exhaust over rough terrain. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.

• Hi-Tuck Design for Extra Ground Clearance, Protects Exhaust Over Rough Terrain
• Constructed from 2-1/2 IN Mandrel-Bent 304 Stainless Steel Tubing
• Utilizes Factory Style Flange and Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

This cat-back exhaust system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel muffler, producing a deep sound. This system produces a deep sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.

• Hi-Tuck Design for Extra Ground Clearance, Protects Exhaust Over Rough Terrain
• Constructed from 2-1/2 IN Mandrel-Bent 304 Stainless Steel Tubing
• Utilizes Factory Style Flange and Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

This cat-back exhaust system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel muffler, producing a deep sound. This system produces a deep sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. This cat-back exhaust system is finished off with a hi-tuck tip that is developed to give you extra clearance during extreme angle climbs or descents protecting exhaust over rough terrain. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.

• Hi-Tuck Design for Extra Ground Clearance, Protects Exhaust Over Rough Terrain
• Constructed from 2-1/2 IN Mandrel-Bent 304 Stainless Steel Tubing
• Utilizes Factory Style Flange and Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

This cat-back exhaust system is constructed of 2-1/2 IN - 2-1/4 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features high-flow 304 stainless steel polished mufflers, producing a deep sound. The mufflers have a polished finish for ultimate corrosion resistance. Finishing off this exhaust system are dual 4 IN diameter black 304 stainless steel clamp-on exhaust tips. The tips features a laser etched Takeda logo for a unique style. This system produces a deep sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. 100% MIG-Welded for race-proven strength and durability.

• Constructed from 2-1/2 IN - 2-1/4 IN Mandrel-Bent 304 Stainless Steel Tubing
• Dual 4 IN Diameter Black 304 Stainless Steel Clamp-On Exhaust Tips
• Utilizes Factory Style Flange and Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Takeda exhaust system is constructed of mandrel-bent stainless steel tubing for maximum strength and durability. Featuring a high-flow stainless steel muffler that produces a deepened tone, this system is guaranteed to gain attention. The state-of-the-art computer-aided technology utilized to design this system provides a precise fitment and a hassel-free install.

• All Hardware and Clamps are Included for a Hassle-Free Installation
• Oversize Mandrel-Bent Stainless Steel Tubing for Maximum Flow
• Includes a High-Flow Stainless Steel Muffler and Resonator
• 100% MIG-Welded for Strength and Durability

This Part Fits:

aFe is proud to introduce an all new Takeda dual cat-back exhaust system for the 2015-2020 Subaru WRX and WRX STI with the H4-2.0L/2.5L (t) engines. This performance cat-back exhaust system is constructed out of 3" into dual 2-1/4" mandrel-bent 304 stainless steel tubing and incorporates a mitered merge to evenly distribute exhaust gases resulting in added horsepower and torque. In testing, this system resulted in gains up to +14 horsepower and +22 lbs. x ft. of torque verified by our in house dyno. This cat-back exhaust utilizes dual high-flow 304 stainless steel mufflers to improve performance across the power band while maintaining an aggressive sound. To finish off the exhaust are quad, 304 stainless steel, high-luster, polished 3-1/2" diameter tips. The tips come with laser-etched Takeda logos for an aggressive style. This unit is 100% TIG-Welded by certified craftsmen for race proven strength and durability and is a direct bolt-on system that requires no modifications. All necessary hardware is included for a hassle-free installation.

• Hassle Free Installation
• High Quality Hardware
• 100% TIG-Welded
• Direct Bolt On

This Part Fits:

This cat-back exhaust system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system are dual 3 IN diameter 304 stainless steel polished clamp-on exhaust tips. The tips features a laser etched Takeda logo for a unique style. This system produces a deep sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.

• Dual 3 IN Diameter Polished 304 Stainless Steel Clamp-On Exhaust Tips
• Constructed from 2-1/2 IN Mandrel-Bent 304 Stainless Steel Tubing
• All Necessary Hardware is Included for a Hassle-Free Installation
• Utilizes Factory Style Flange and Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

This cat-back exhaust system is constructed of 2-1/4 IN - 2-1/2 IN mandrel-bent brushed finished 304 stainless steel tubing for maximum strength and durability. This system features high-flow 304 stainless steel mufflers, producing a deep sound. The mufflers has a polished finish for ultimate corrosion resistance. Finishing off this exhaust system are dual 4-1/2 IN diameter blue flame 304 stainless steel clamp-on exhaust tips. The tips features a laser etched Takeda logo for a unique style. This system produces a deep sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. A mitered merge collector is used to decrease turbulence and increase exhaust velocity resulting in increased horsepower, torque and improved throttle response. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% TIG-Welded for race-proven strength and durability.

• Constructed from 2-1/2 IN - 2-1/4 IN Mandrel-Bent Brushed Finished 304 Stainless Steel Tubing
• Dual 4-1/2 IN Diameter Blue Flame 304 Stainless Steel Clamp-On Exhaust Tips
• Utilizes Factory Style Flange and Hangers for a Secure Fit
• 100% TIG-Welded for Strength and Durability

This Part Fits:

This unique dual transverse exhaust system is constructed form mandrel bent stainless steel and is TIG welded. This system was designed and engineered by tuning the perfect tube lengths; ultimately maximizing performance across the power band while maintaining a great tone. aFe carefully engineered this system to maintain distinct exhaust tones. All exhaust systems are engineered and manufactured in our Corona California manufacturing facility. All systems use factory mounting locations providing stability and hassle free installation. High quality band clamps are used for a complete 360 degree sealing surface. Dual free flowing transverse mufflers are used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torqye.

• Massive Oval Double Wall Tips
• Simple Installation
• Aggressive Sound
• Leak Free Seal

This Part Fits:

Add power, sound and taste to your Accord with this Takeda cat-back system. 2-1/2" to 1-3/4" mandrel bent, 304 stainless steel tubing improves exhaust flow to deliver up to +13 HP and +16 lbs. x ft. torque. 100% hand TIG-welded for long lasting strength and durability, this Takeda system incorporates dual, high-flow 304 stainless steel mufflers to maintain an aggressive tone. Dual, oval, angle-cut tips etched with the Takeda logo gives your Accord a track-style, custom appearance.

• Brush Finished 304 Stainless Steel For Performance and Good Looks
• Dual Stainless Steel Mufflers Delivers A Deep Aggressive Tone
• Dual Oval Tips w/Etched Takeda Logo Give A Custom Appearance
• 100% Hand TIG-Welded For Strength and Durability

This Part Fits:

aFe is proud to introduce the new Takeda Dual Cat-Back Exhaust System for the 13-14 Honda Accord LX, EX, EX-L Sedan L4-2.4L. In recent testing this system produced 13 horsepower and 16 lbs. x ft. of torque. This exhaust starts out with an OE style flange and uses 2.5in. mandrel bent 304 stainless steel tubing and merges into dual 2.5in. tubing which improves performance across the power band while maintains a great tone. The dual, high flow, polished 304 stainless steel mufflers give an aggressive sound at high RPMs, yet maintaining a subtle tone at cruising speeds. To finish off this 100% TIG-welded exhaust are dual, Takeda laser etched, double wall, angle cut 304 stainless steel tips. This exhaust is designed to convert the standard L4 single exhaust into a sporty dual exhaust. It is a direct bolt on system which requires no cutting or drilling and includes all necessary hardware for a hassle free installation.

• Quality OE Style Flanges/Band Clamps For Complete Sealing Surface
• Mitered Collectors Decreases Turbulence
• Single To Dual Exhaust Conversion
• Includes All Necessary Hardware
• Hassle Free Installation
• No Cutting Or Drilling
• Direct Bolt-On System
• Aggressive Sound

This Part Fits:

This cat-back exhaust system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features dual 6” round x 18” long high-flow 304 stainless steel mufflers, producing a deep sound with minimal interior drone. This system produces a deep sound unleashing all available horsepower and torque with little to no unwanted interior cabin drone. Utilizing factory hangers, this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. 100% MIG-Welded for race-proven strength and durability.

• Constructed from 2-1/2 IN Mandrel-Bent 304 Stainless Steel Tubing
• Utilizes Factory Style Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

This MACH Force-Xp exhaust system is constructed of mandrel-bent stainless steel tubing for maximum strength and durability. Featuring a high-flow stainless steel muffler that produces a deepened tone, this system is guaranteed to gain attention. The state-of-the-art computer-aided technology utilized to design this system provides a precise fitment and a hassel-free install.

• Utilizes Factory Style Flange and Hangers for a Secure Fit
• Constructed from Mandrel-Bent Stainless Steel Tubing
• 100% MIG-Welded for Strength and Durability

This Part Fits:

Unleash power and sound while improving the looks on your Z4 M Coupe with this MACH Force-Xp 2-1/2" 304 stainless steel cat back system. The larger diameter, mandrel bent tubing along with high-flow, stainless steel mufflers are less restricting for maximum flow, optimum sound and long lasting good looks. 100% hand TIG-welded for proven quality and durability, this MACH Force-Xp system is finished off with quad 3" polished, stainless steel exhaust tips with laser-etched aFe POWER logos to give your E86 a track-prepped, custom look. Performance Gains: In testing, the cat-back exhaust system resulted in gains up to +7 horsepower and +15 lbs. x ft. of torque, as measured on our in-house dyno. Quad 3" Diameter Stainless Steel Tips: Quad, rear exit, 3" diameter, angle cut stainless steel exhaust tips with an aFe POWER logo laser-etched on the top for a custom look. High-Flow Performance Muffler: Incorporating less-restricting dual, high-flow, 304 stainless steel mufflers into the exhaust system to eliminate exhaust drone, maintaining a smooth, unique sound. 2-1/2" 304 Stainless Steel Tubing: Less restrictive than stock exhaust allows maximum flow and low turbulence; increasing torque, horsepower and improved throttle response. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time. Hassle-Free Installation: This exhaust system is designed to be a true bolt on system with no cutting or modifications required. Quality hardware and clamps are included for a hassle-free installation.

• 100 Percent Hand TIG-Welded For Race Proven Strength
• Improved Performance and Rust Resistant Finish
• Quad Rear Exit 3 in. Polished SS Exhaust Tips
• Mandrel Bent 304 Stainless Steel Tubing
• Dual High Flow Polished 304 SS Mufflers
• High Quality Hardware and Clamps
• +15 ft. x lbs. TQ & +15 HP
• Hassle Free Installation

This Part Fits:

Dual, 4-1/2" Black Stainless Steel Exhaust Tips: This dual rear-exit system features 4-1/2" round, double-wall, black clamp-on stainless steel exhaust tips w/ laser-etched Takeda logo for a custom appearance. Optional polished (PN 49T25454-P09) and blue flame (PN 49T25454-L07) tips sold separately.

• Modular design utilizes stock mounting locations with no cutting or modifications required for a hassle-free installation
• Dual 4-1/2" rear exit, black stainless steel tips give a unique, custom appearance
• 100% TIG-Welded for strength and durability

This Part Fits:

This MACH Force-Xp Cat-Back exhaust system is constructed of 3" mandrel-bent stainless steel tubing and comes complete with free-flowing high temp black powder-coated muffler, OE style bayonet hangers, band clamps and necessary hardware for a hassle-free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. Hi-Tuck: This exhaust system is finished off with a Hi-Tuck that is developed to give you extra clearance during extreme angle climbs or descents. Installation is a Snap: This MACH Force-Xp uses all factory mounting locations providing stability and a hassle-free installation. Leak-Free Seal: High quality OE-style flange and premium band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A free-flowing stainless steel high temp black powder-coated 22" length muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time.

• High Quality Band Clamps For Leak-Free Seal
• Mandrel Bent Stainless Steel Tubing
• Hassle Free Installation
• Free Flowing Muffler
• Aggressive Sound
• Smooth Curves

This Part Fits:

aFe is proud to introduce the MACH Force-Xp Cat-Back exhaust system for the 2010-2017 Nissan Patrol (Y62) with the V8-5.6L (400 hp) engine. This exhaust system outflows the factory exhaust. This cat-back exhaust is constructed of 3" mandrel-bent 304 stainless steel tubing and comes complete with free-flowing high temp black powder-coated muffler, OE-style bayonet hangers, band clamps for a hassle-free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. The system is finished off with single gloss black 304 stainless steel, double wall slash cut laser etched tip for an aggressive style. Installation is a Snap: This MACH Force-Xp exhaust system use all factory mounting locations providing stability and a hassle-free installation. Leak-Free Seal: High quality OE-style flange and band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A free-flowing stainless steel high temp black powder-coated 22" length muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

• Constructed Out Of 3 in. Mandrel Bent Stainless Steel Tubing
• Laser -Etched aFe Power Logo On Tip For An Aggressive Style
• Utilizes High Flowing Stainless Steel Single In/Out Muffler
• Complete For A Hassle-Free Installation
• Heavy Duty Band Clamps For Secure Fit
• +15 lbs. x ft. TQ & +13 HP
• Single Side Exit System
• Bayonet Style Hangers

This Part Fits:

This cat-back exhaust system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system is a 3-1/2 IN diameter 304 stainless steel clamp-on exhaust tip. The tip features a laser etched Takeda logo for a unique style. This system produces a powerful sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.

• Constructed from 2-1/2 IN Mandrel-Bent 304 Stainless Steel Tubing
• Dual 3-1/2 IN Diameter Polished 304 Stainless Steel Exhaust Tips
• Acoustically Tuned Expansion Chamber for a Deep Exhaust Tone
• Utilizes Factory Style Flange and Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

This cat-back exhaust system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system is a 3-1/2 IN diameter 304 stainless steel clamp-on exhaust tip. The tip features a laser etched Takeda logo for a unique style. This system produces a powerful sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.

• Constructed from 2-1/2 IN Mandrel-Bent 304 Stainless Steel Tubing
• Dual 3-1/2 IN Diameter Black 304 Stainless Steel Exhaust Tips
• Acoustically Tuned Expansion Chamber for a Deep Exhaust Tone
• Utilizes Factory Style Flange and Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

This cat-back exhaust system is constructed of 2-1/2 IN - 3 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel muffler, producing a powerful sound. This system produces a powerful sound unleashing all available horsepower and torque. Utilizing factory style flanges and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. This cat-back exhaust system is finished off with a hi-tuck tip that is developed to give you extra clearance during extreme angle climbs or descents protecting exhaust over rough terrain. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.

• Hi-Tuck Design for Extra Ground Clearance, Protects Exhaust Over Rough Terrain
• Constructed from 2-1/2 IN - 3 IN Mandrel-Bent 304 Stainless Steel Tubing
• Utilizes Factory Style Flanges and Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

This cat-back exhaust system is constructed of 2-1/2 IN - 3 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel muffler, producing a deep sound. Finishing off this exhaust system is a 4 IN diameter 304 stainless steel exhaust tip. The tip features a laser etched aFe POWER logo for a unique style. This system produces a deep sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. This cat-back exhaust system is finished off with a hi-tuck tip that is developed to give you extra clearance during extreme angle climbs or descents protecting exhaust over rough terrain. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.

• Constructed from 2-1/2 IN - 3 IN Mandrel-Bent 304 Stainless Steel Tubing
• Acoustically Tuned Expansion Chamber for a Deep Exhaust Tone
• Utilizes Factory Style Flange and Hangers for a Secure Fit
• 4 IN Diameter Black 304 stainless steel Exhaust Tip
• 100% MIG-Welded for Strength and Durability

This Part Fits:

This cat-back exhaust system is constructed of 2-1/2 IN - 3 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel muffler, producing a deep sound. Finishing off this exhaust system is a 4 IN diameter 304 stainless steel exhaust tip. The tip features a laser etched aFe POWER logo for a unique style. This system produces a deep sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. This cat-back exhaust system is finished off with a hi-tuck tip that is developed to give you extra clearance during extreme angle climbs or descents protecting exhaust over rough terrain. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.

• Constructed from 2-1/2 IN - 3 IN Mandrel-Bent 304 Stainless Steel Tubing
• Acoustically Tuned Expansion Chamber for a Deep Exhaust Tone
• Utilizes Factory Style Flange and Hangers for a Secure Fit
• 4 IN Diameter Black 304 stainless steel Exhaust Tip
• 100% MIG-Welded for Strength and Durability

This Part Fits:

This cat-back exhaust system is constructed of 2-1/2 IN - 3 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel muffler and acoustically tuned expansion chamber for a deep exhaust tone. Finishing off this exhaust system is a 4 IN diameter black 304 stainless steel exhaust tip. The tip features a laser etched aFe POWER logo for a unique style. This exhaust features an acoustically tuned expansion chamber for a deep exhaust tone. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.

• Constructed from 2-1/2 IN - 3 IN Mandrel-Bent 304 Stainless Steel Tubing
• Acoustically Tuned Expansion Chamber for a Deep Exhaust Tone
• Utilizes Factory Style Flange and Hangers for a Secure Fit
• 4 IN Diameter Black 304 Stainless Steel Exhaust Tip
• 100% MIG-Welded for Strength and Durability

This Part Fits:

Vulcan Series 2-1/2 IN to 3 IN Stainless Steel Cat-Back Exhaust System Black Toyota Tundra 22-26 V6-3.4L (tt)

• Constructed from 2-1/2 IN - 3 IN Mandrel-Bent 304 Stainless Steel Tubing
• Rear Side-Exit Exhaust with Dual 4 IN 304 Stainless Steel Exhaust Tip
• Utilizes Factory Style Flanges and Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability
• No Modification Necessary

This Part Fits:

This cat-back exhaust system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel polished muffler, producing a deep sound. The muffler has a polished finish for ultimate corrosion resistance. Finishing off this exhaust system is a 4-1/2 IN diameter polished 304 stainless steel clamp-on exhaust tip. The tip features a laser etched Takeda logo for a unique style. This system produces a deep sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.

• 4-1/2 IN Diameter Polished 304 Stainless Steel Clamp-On Exhaust Tip
• Constructed from 2-1/2 IN Mandrel-Bent 304 Stainless Steel Tubing
• Utilizes Factory Style Flange and Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits: