Fits 2020-2025 Subaru Outback Base, Limited, Onyx Edition, Premium, and Touring models (H4-2.5L).

The aFe POWER Takeda cat-back exhaust system is engineered to provide your Subaru Outback with improved flow and a deeper exhaust note while maintaining essential off-road clearance. Constructed from 2-1/2 inch mandrel-bent 304 stainless steel tubing, this system is designed for maximum corrosion resistance and durability. The integrated Hi-Tuck tip is specifically developed for outdoor enthusiasts, providing additional clearance during extreme angle climbs or descents to protect your exhaust components on rough terrain.

This system features a high-flow 304 stainless steel muffler and is 100% MIG-welded for race-proven strength. Installation is straightforward and hassle-free, utilizing factory-style flanges and hangers for a direct bolt-on fit that requires no cutting or permanent vehicle modifications.

• Manufacturer Part Number: 49-36808
• Material: 2-1/2" Mandrel-Bent 304 Stainless Steel
• Muffler: High-Flow 304 Stainless Steel
• Design: Hi-Tuck Tip for increased ground clearance
• Installation: Direct Bolt-On with factory-style hangers
• Construction: 100% MIG-Welded

Fits 2015-2019 Subaru Outback 2.5i, Limited, Premium, and Touring models (H4-2.5L).

This Takeda cat-back exhaust system is engineered to improve exhaust flow and provide a deep, resonant tone for your Subaru Outback. Built from 2.5-inch mandrel-bent 304 stainless steel tubing, this system offers superior corrosion resistance and durability. The design features a high-flow 304 stainless steel muffler and is 100% MIG-welded for race-proven strength. The specialized Hi-Tuck design provides additional ground clearance, protecting your exhaust components when navigating rough terrain or off-road conditions.

Designed for a hassle-free installation, this system utilizes factory-style flanges and hangers to ensure a secure, direct bolt-on fit without the need for cutting or permanent modifications to your vehicle.

• Constructed from 2.5-inch mandrel-bent 304 stainless steel tubing
• High-flow 304 stainless steel muffler produces a deep, aggressive sound
• Hi-Tuck design for increased ground clearance over rough terrain
• 100% MIG-welded for maximum durability and strength
• Direct bolt-on installation using factory mounting points
• Manufacturer Part Number: 49-36807

Fits 2010-2014 Subaru Outback 2.5i, 2.5i Limited, and 2.5i Premium (H4-2.5L).

The aFe POWER Takeda cat-back exhaust system is engineered to improve flow and durability for the 2.5L Outback. Constructed from 2-1/2" mandrel-bent 304 stainless steel tubing, this system provides maximum strength and corrosion resistance. The high-flow 304 stainless steel muffler is tuned to produce a deep, resonant tone while unleashing horsepower and torque potential.

Designed for the adventurer, this system features a Hi-Tuck tip developed to provide extra ground clearance during extreme angle climbs or descents, protecting your exhaust components over rough terrain. This system is 100% MIG-welded for race-proven durability and uses computer-aided design (CAD) to ensure a precise, factory-level fit.

• Direct Bolt-On: Utilizes factory-style flanges and hangers for a hassle-free installation with no cutting or modifications required.
• Premium Materials: 304 stainless steel tubing and muffler for long-lasting performance in harsh conditions.
• Hi-Tuck Design: Optimized for off-road clearance and protection.
• Precision Manufacturing: 100% MIG-welded and CAD-designed for perfect fitment.
• Manufacturer Part Number: 49-36806

Fits 2014-2018 Subaru Forester XT (H4-2.5L).

Improve your vehicle's exhaust flow and sound with the aFe Takeda cat-back exhaust system. This premium system is engineered from 2-1/2 inch to 2-1/4 inch mandrel-bent 304 stainless steel tubing, providing maximum durability and optimal flow characteristics. The high-flow 304 stainless steel mufflers feature a polished finish for superior corrosion resistance and are tuned to produce a deep, performance-oriented exhaust note. For a custom look, the system is finished with dual 4-inch diameter black 304 stainless steel clamp-on tips, complete with laser-etched Takeda logos.

Built for a precise factory-style fit, this system utilizes CNC-machined flanges and factory-style hangers to ensure a secure, direct bolt-on installation with no cutting or modifications required. Every joint is 100% MIG-welded to provide the race-proven strength and structural integrity demanded by performance enthusiasts.

• Constructed from 2-1/2" and 2-1/4" mandrel-bent 304 stainless steel tubing
• Dual 4" diameter black 304 stainless steel clamp-on exhaust tips with laser-etched logos
• High-flow polished 304 stainless steel mufflers for a deep, resonant sound
• Utilizes factory-style flange and hangers for a secure, hassle-free fitment
• 100% MIG-welded for maximum durability and strength
• Manufacturer Part Number: 49-36804-B

Fits 2018-2023 Subaru Crosstrek models (H4-2.0L) across Base, Hybrid, Limited, Premium, and Sport trims.

The Takeda Cat-Back Exhaust System by aFe POWER is engineered to improve exhaust flow and deliver a deeper, more aggressive engine note. Constructed from 2.5-inch mandrel-bent 304 stainless steel tubing, this system provides superior corrosion resistance and durability compared to factory components. Each system is 100% MIG-welded and features a high-flow stainless steel muffler and resonator designed using computer-aided technology to ensure precise, bolt-on fitment.

• 2.5-inch mandrel-bent 304 stainless steel tubing for maximum exhaust velocity
• Includes high-flow stainless steel muffler and resonator for a refined, deeper tone
• 100% MIG-welded for long-lasting structural integrity
• Computer-aided design (CAD) ensures a precise, hassle-free installation
• Complete with all necessary hardware and clamps
• Manufacturer Part Number: 49-36803

Fits 2015-2021 Subaru WRX and WRX STI (2.0L / 2.5L / H4-2.0L).

Optimize your Subaru's exhaust flow and acoustic profile with the aFe Takeda cat-back exhaust system. This performance system is engineered from 3-inch mandrel-bent 304 stainless steel tubing that transitions into dual 2-1/4-inch pipes. It features a mitered merge collector designed to evenly distribute exhaust gases, reducing turbulence and backpressure. In dyno testing, this configuration produced gains of up to +14 horsepower and +22 lbs. x ft. of torque.

Constructed for long-term durability, the system is 100% TIG-welded by certified craftsmen and utilizes dual high-flow 304 stainless steel mufflers to deliver an aggressive tone without sacrificing daily drivability. The system is finished with quad 3-1/2-inch high-luster polished tips featuring laser-etched Takeda logos. This is a direct bolt-on assembly that requires no cutting or modifications to the factory chassis.

• Manufacturer Part Number: 49-36801-P
• Material: 304 Stainless Steel
• Tubing Diameter: 3" to dual 2-1/4"
• Tip Size: Quad 3-1/2" Polished Stainless Steel
• Gains: +14 HP / +22 lbs. x ft. Torque
• Installation: Direct bolt-on; includes all necessary hardware

Fits 2022-2026 Honda Civic Sport (L4-2.0L).

Unlock the performance and acoustic potential of your Honda Civic with the aFe POWER Takeda cat-back exhaust system. This system is engineered for maximum flow and durability, utilizing 2-1/2 inch mandrel-bent 304 stainless steel tubing to reduce backpressure compared to the factory equipment. The result is a deeper, more aggressive exhaust note and improved throttle response across the RPM range.

This direct bolt-on system is designed for a hassle-free installation, utilizing high-quality 100% MIG-welded construction and factory-style flanges and hangers. No cutting or permanent vehicle modifications are required. Finishing the system are dual 3-inch clamp-on polished 304 stainless steel tips featuring laser-etched Takeda logos for a refined aesthetic.

• Constructed from 2.5-inch mandrel-bent 304 stainless steel tubing for corrosion resistance and flow
• Dual 3-inch diameter polished 304 stainless steel clamp-on tips
• 100% MIG-welded for race-proven structural integrity
• Direct bolt-on fitment using factory-style hangers and flanges
• Includes all necessary hardware for installation
• Manufacturer Part Number: 49-36631-P

Fits 2009-2014 Acura TSX Base and Special Edition (L4-2.4L).

The aFe Takeda cat-back exhaust system is engineered to optimize flow and sound for the 2.4L Acura TSX. This system is constructed from 2.5-inch to 2.25-inch mandrel-bent 304 stainless steel tubing with a brushed finish for maximum durability and corrosion resistance. The design utilizes a mitered merge collector to reduce exhaust turbulence and increase velocity, improving throttle response and power across the RPM range.

High-flow 304 stainless steel mufflers deliver a deep, refined tone, while the polished finish ensures long-lasting aesthetics. The system is capped with dual 4.5-inch Blue Flame 304 stainless steel clamp-on tips featuring a laser-etched Takeda logo. Built for a hassle-free installation, this system is 100% TIG-welded and utilizes factory-style flanges and hangers for a precise, direct-fit bolt-on experience with no cutting or modifications required.

• Manufacturer Part Number: 49-36629-L
• Material: Brushed 304 Stainless Steel
• Tubing Diameter: 2.5-inch into 2.25-inch
• Tip Size: Dual 4.5-inch Blue Flame stainless steel clamp-on tips
• Construction: 100% TIG-welded for race-proven strength
• Installation: Direct bolt-on using factory mounting points
• Feature: High-flow mufflers with a mitered merge collector

Fits 2008-2012 Honda Accord EX and EX-L models (V6-3.5L).

The Takeda cat-back exhaust system by aFe Power is engineered to optimize exhaust flow and provide a deep, aggressive tone for the Honda Accord. This dual transverse exhaust system is constructed from mandrel-bent 304 stainless steel tubing, transitioning from 2.25in to dual 2in diameters for maximum performance across the power band. The system is TIG-welded for maximum strength and durability, featuring dual free-flowing transverse mufflers designed to absorb high-pitch tones while unleashing available horsepower and torque.

• Mandrel-bent 304 stainless steel construction for corrosion resistance and improved flow
• TIG-welded for superior weld strength and longevity
• Dual free-flowing transverse mufflers produce a powerful, aggressive exhaust note
• Massive oval double-wall polished exhaust tips for a premium look
• Uses factory mounting locations for a stable, hassle-free installation
• Includes high-quality band clamps for a complete 360-degree, leak-free seal
• Manufacturer Part Number: 49-36612

Fits 2013-2017 Honda Accord EX, EX-L, LX, and Sport models (L4-2.4L).

Enhance your Honda Accord’s performance and exhaust note with the aFe Takeda Dual Cat-Back Exhaust system. This system is engineered to replace the restrictive factory exhaust, utilizing mandrel-bent 304 stainless steel tubing that transitions from 2-1/2" to 1-3/4" to maximize exhaust flow. These improvements deliver dyno-verified gains of up to +13 horsepower and +16 lbs. x ft. of torque, providing better throttle response and a more aggressive tone throughout the RPM range.

Constructed for longevity and precision, this exhaust system is 100% hand TIG-welded by skilled craftsmen. It features dual high-flow 304 stainless steel mufflers that produce a deep, sporty sound without compromising durability. The system is finished with dual, oval, angle-cut black tips etched with the Takeda logo for a refined, custom appearance.

• Direct-fit for 2013-2017 Honda Accord Sedan L4-2.4L
• Mandrel-bent 304 stainless steel tubing for maximum flow
• Dual high-flow mufflers deliver an aggressive exhaust note
• Dual oval, angle-cut black tips with etched Takeda logo
• 100% hand TIG-welded for superior strength
• Manufacturer Part Number: 49-36605-B

Fits 2013-2017 Honda Accord EX, EX-L, LX, LX-S, Sport, and Sport Special Edition models (L4-2.4L).

The aFe Takeda dual cat-back exhaust system is engineered to convert the standard L4 single exhaust into a high-performance dual-exit setup. Built from 2.5-inch mandrel-bent 304 stainless steel tubing, this system utilizes an OE-style flange and mitered collectors to minimize turbulence and optimize flow. During manufacturer testing, this setup produced gains of 13 horsepower and 16 lbs. x ft. of torque. The 100% TIG-welded construction ensures long-term durability and precise fitment.

Acoustics are managed by dual high-flow 304 stainless steel mufflers, delivering an aggressive tone at high RPM while maintaining a subtle presence at cruising speeds. The system is finished with Takeda laser-etched, double-wall, angle-cut polished tips for a refined aesthetic. This is a direct bolt-on system that requires no cutting or drilling and includes all necessary hardware for a straightforward installation.

• Manufacturer Part Number: 49-36605
• Material: 304 Stainless Steel
• Tubing Diameter: 2.5-inch mandrel-bent
• Exit Style: Dual rear exit with polished tips
• Performance Gains: +13 HP / +16 lbs. x ft. Torque
• Installation: Direct bolt-on with OE-style flanges and band clamps
• Construction: 100% TIG-welded for maximum strength

Fits 2002-2008 Mercedes-Benz G500 Base (L6-3.0L).

The aFe Vulcan Series cat-back exhaust system is engineered to provide a deep, resonant exhaust note for the Mercedes-Benz G-Class while maintaining minimal interior cabin drone. This system is constructed from 2.5-inch mandrel-bent 304 stainless steel tubing to ensure maximum flow, strength, and corrosion resistance in demanding conditions. Dual 6-inch round by 18-inch long high-flow 304 stainless steel mufflers are utilized to optimize performance and sound quality.

Built for durability, the entire system is 100% MIG-welded for race-proven structural integrity. It is designed as a direct bolt-on solution, utilizing factory-style hangers for a secure fit without the need for cutting or custom modifications, ensuring a hassle-free installation process.

• Constructed from 2.5-inch mandrel-bent 304 stainless steel tubing
• Dual 6" round x 18" long high-flow 304 stainless steel mufflers
• 100% MIG-welded for maximum strength and durability
• Direct bolt-on installation using factory-style hangers
• No cutting or vehicle modifications required
• Manufacturer Part Number: 49-36501

Fits select 2006-2022 Audi Q5 and BMW 325i, 325xi, 328i, 328xi, and 328i xDrive (L4-2.0L).

The aFe MACH Force-Xp cat-back exhaust system is engineered to optimize exhaust flow and durability. Constructed from high-strength mandrel-bent stainless steel tubing, this system transitions from 3-inch to 2.5-inch diameters to maintain exhaust velocity while reducing backpressure. The included high-flow stainless steel muffler is designed to deliver a deeper, more aggressive tone without compromising structural integrity.

Designed for a precise fit and straightforward installation, this system utilizes factory-style flanges and hangers to ensure a secure mount to your vehicle's existing points. Every joint is 100% MIG-welded for the maximum strength required for long-term performance.

• Manufacturer Part Number: 49-36447
• Tubing Diameter: 3-inch to 2.5-inch stepped design
• Material: Mandrel-bent stainless steel
• Construction: 100% MIG-welded for durability
• Muffler: High-flow stainless steel unit for a deepened tone
• Fitment: Utilizes factory-style flanges and hangers

Fits 2006-2008 BMW Z4 M Coupe and M Roadster (L6-3.2L).

Unleash the full potential of your S54 engine with the aFe MACH Force-Xp cat-back exhaust system. This premium exhaust is constructed from 2-1/2" mandrel-bent 304 stainless steel tubing to maximize exhaust flow and reduce turbulence compared to the factory equipment. During in-house dyno testing, this system produced gains of up to +7 horsepower and +15 lbs. x ft. of torque.

Engineered for both performance and durability, the system features dual high-flow 304 stainless steel mufflers that deliver a smooth, aggressive tone while eliminating unwanted cabin drone. Every joint is 100% hand TIG-welded for race-proven strength. For a precise, stable fit, aFe uses OE-style bayonet hangers that maintain pipe location even under high heat and vibration. This is a true bolt-on system, requiring no cutting or modifications for a hassle-free installation.

• Construction: 2-1/2" mandrel-bent 304 stainless steel tubing for maximum flow
• Mufflers: Dual high-flow 304 stainless steel performance mufflers
• Exit Style: Quad rear exit with 3" angle-cut polished stainless steel tips
• Welding: 100% hand TIG-welded for maximum durability
• Installation: Direct bolt-on design with no cutting required
• Hardware: Includes high-quality clamps and bayonet-style hangers
• MPN: 49-36339-P

Upgrade your vehicle's performance and presence with the aFe Takeda 2.5in 304 Stainless Steel Cat-Back Exhaust System. Fits 2016-2024 Infiniti Q50 models equipped with the V6-3.0L engine. This high-flow system is engineered for durability and precision, utilizing 100% TIG-welded construction for maximum strength and corrosion resistance.

This dual rear-exit system features 4-1/2 inch round, double-wall, black clamp-on stainless steel exhaust tips finished with a laser-etched Takeda logo for a refined, custom appearance. The modular design is built for a hassle-free installation, bolting directly to factory mounting locations without the need for cutting or permanent modifications. This system replaces the restrictive factory exhaust to improve flow and provide a more aggressive acoustic profile.

• Fits 2016-2024 Infiniti Q50 (V6-3.0L)
• 2.5-inch 304 stainless steel mandrel-bent tubing
• Dual 4-1/2 inch black double-wall stainless steel tips
• 100% TIG-welded for superior strength and longevity
• Modular design utilizes stock mounting locations for easy bolt-on installation
• Manufacturer Part Number: 49-36132NM-B

Fits select 2011-2024 Nissan Armada and INFINITI QX56/QX80 (V8-5.6L).

The aFe MACH Force-Xp cat-back exhaust system (MPN 49-36120) is engineered to optimize performance, durability, and ground clearance. Constructed from 3-inch mandrel-bent 304 stainless steel tubing, this system minimizes restriction and improves exhaust flow over factory components. The Hi-Tuck design is specifically developed to position the tailpipe for maximum clearance, preventing contact during steep approach and departure angles.

To deliver a deep, aggressive tone without excessive high-pitch drone, the system utilizes a 22-inch long, free-flowing muffler finished in high-temperature black powder coating. Installation is simplified by using all factory mounting locations, and the included OE-style bayonet hangers ensure the exhaust remains stable even under high heat and vibration conditions.

• Construction: 3-inch mandrel-bent 304 stainless steel tubing for corrosion resistance and flow efficiency.
• Hi-Tuck Design: Provides extra ground clearance for off-road climbs and descents.
• Muffler: 22" free-flowing stainless steel muffler with high-temp black powder coating.
• Secure Sealing: OE-style flanges and premium 360-degree band clamps eliminate leak paths.
• Installation: Direct-fit system utilizes factory mounting points and bayonet-style hangers.
• Part Number: 49-36120

Fits select 2011-2024 Nissan Armada and Infiniti QX56/QX80 (V8-5.6L).

The aFe Power MACH Force-Xp Cat-Back exhaust system is engineered to outperform the restrictive factory setup on your V8-powered SUV. Constructed from 3-inch mandrel-bent 304 stainless steel tubing, this system provides maximum flow and durability. The heart of the system is a 22-inch length, high-flow stainless steel muffler that effectively absorbs high-pitch tones while delivering a deep, powerful exhaust note. This straight-through design helps unleash an additional +13 horsepower and +15 lbs. x ft. of torque.

Installation is straightforward using all factory mounting locations, requiring no modifications to the chassis. The system features OE-style bayonet hangers to ensure the exhaust remains stable under high-heat and high-vibration conditions, and it is secured with heavy-duty band clamps for a leak-free 360-degree seal. Finishing the look is a single, double-wall slash-cut 304 stainless steel tip with a gloss black powder-coated finish and a laser-etched aFe Power logo.

• Manufacturer Part Number: 49-36114-B
• Material: 304 Stainless Steel
• Tubing Diameter: 3-inch mandrel-bent
• Muffler: 22-inch straight-through stainless steel
• Tip: Single black 304 stainless steel slash-cut
• Gains: +15 lbs. x ft. TQ and +13 HP
• Configuration: Single side exit
• Installation: Bolt-on utilizing factory mounting points and bayonet hangers

Fits 2025-2026 Toyota Camry LE, SE, XLE, XSE, and Nightshade (L4-2.5L).

Improve your Camry's exhaust flow and sound profile with the aFe Takeda cat-back exhaust system. This system is engineered from 2-1/2 inch mandrel-bent 304 stainless steel tubing for maximum durability and corrosion resistance. The design features an acoustically tuned expansion chamber that delivers a deep, powerful exhaust tone while maintaining daily-driver refinement. For a seamless install, this kit utilizes factory-style flanges and hangers, making it a direct bolt-on solution that requires no cutting or permanent modifications to your chassis.

• Constructed from 2-1/2" mandrel-bent 304 stainless steel tubing for increased flow
• Dual 3-1/2" diameter polished 304 stainless steel clamp-on tips with laser-etched Takeda logos
• Acoustically tuned expansion chamber provides a deep, refined exhaust note
• 100% MIG-welded for race-proven strength and longevity
• Direct bolt-on fitment using factory mounting points and flanges
• CAD-designed for precise vehicle-specific clearance and alignment
• Manufacturer Part Number: 49-36087-P

Fits 2025-2026 Toyota Camry (L4-2.5L) LE, Nightshade, SE, XLE, and XSE models.

The aFe Takeda cat-back exhaust system is engineered for the 2025-2026 Toyota Camry to provide a deep, powerful exhaust note without sacrificing durability. Constructed from 2-1/2 inch mandrel-bent 304 stainless steel tubing, this system ensures maximum flow and corrosion resistance. An integrated, acoustically tuned expansion chamber helps refine the sound profile, while 100% MIG-welded construction provides race-proven strength for daily driving or spirited use.

Installation is a straightforward, hassle-free process. This system is CAD-designed for precise vehicle fitment and utilizes factory-style flanges and hangers, making it a direct bolt-on upgrade that requires no cutting or permanent modifications to your Camry. The system is finished with dual 3-1/2 inch clamp-on black 304 stainless steel tips featuring laser-etched Takeda logos for a custom aesthetic.

• Constructed from 2-1/2" mandrel-bent 304 stainless steel tubing
• Dual 3-1/2" diameter black 304 stainless steel clamp-on tips
• Acoustically tuned expansion chamber for a deep, refined tone
• 100% MIG-welded for maximum durability and strength
• Direct bolt-on fitment using factory-style flanges and hangers
• Computer-aided design (CAD) ensures precise fitment
• Manufacturer Part Number: 49-36087-B

Fits 2024-2026 Lexus GX550 (Luxury, Luxury+, Overtrail, Overtrail+, Premium, Premium+).

The aFe POWER Vulcan Series cat-back exhaust system for the 2024-2026 Lexus GX550 is engineered for durability and off-road performance. This system is constructed from 2-1/2-inch to 3-inch mandrel-bent 304 stainless steel tubing, providing maximum strength and corrosion resistance. It features a high-flow 304 stainless steel muffler that delivers a deep, powerful exhaust note while optimizing flow across the power band.

Designed specifically for the GX enthusiast, the "Hi-Tuck" tip is developed to provide extra ground clearance during extreme angle climbs or descents, protecting your exhaust components over rough terrain. This direct bolt-on system utilizes factory-style flanges and hangers, requiring no cutting or permanent modifications for a straightforward installation. Each system is 100% MIG-welded for race-proven strength and longevity.

• Constructed from 2-1/2 inch to 3 inch mandrel-bent 304 stainless steel tubing
• Hi-Tuck design increases ground clearance for improved off-road departure angles
• High-flow 304 stainless steel muffler provides a powerful, aggressive sound
• Utilizes factory-style flanges and hangers for a secure, direct bolt-on fitment
• 100% MIG-welded for maximum durability and strength
• Manufacturer Part Number: 49-36085

Fits 2025-2026 Toyota 4Runner models including SR5, TRD Off-Road, TRD Pro, Trailhunter, Limited, and Platinum.

Enhance the exhaust flow and ground clearance of your rig with the aFe POWER cat-back exhaust system. This system is engineered from 2.5-inch to 3-inch mandrel-bent 304 stainless steel tubing, providing superior corrosion resistance and maximum durability for off-road use. It features a high-flow 304 stainless steel muffler and an acoustically tuned expansion chamber designed to produce a deep, powerful tone without sacrificing interior comfort.

The hi-tuck tip design is specifically developed for off-road enthusiasts, providing extra clearance for extreme approach and departure angles to protect your exhaust during technical climbs. Installation is a straightforward bolt-on process, utilizing factory-style flanges and hangers for a secure fit with no cutting or modifications required. This system is finished with a 4-inch polished 304 stainless steel tip featuring a laser-etched aFe POWER logo.

• Constructed from 2.5" to 3" mandrel-bent 304 stainless steel tubing
• Acoustically tuned expansion chamber for a deep, resonant exhaust note
• Hi-tuck tip design increases clearance for off-road obstacles
• 100% MIG-welded for race-proven strength
• Direct bolt-on installation with factory-style hardware
• Includes 4" polished 304 stainless steel exhaust tip
• Manufacturer Part Number: 49-36080-P

Fits 2025-2026 Toyota 4Runner (SR5, TRD Sport, TRD Off-Road, Limited, TRD Pro, Trailhunter, and Platinum models).

Enhance your 4Runner's performance and exhaust note with the aFe POWER Cat-Back Exhaust System. This system is constructed from 2-1/2" to 3" mandrel-bent 304 stainless steel tubing for maximum flow and corrosion resistance. The high-flow 304 stainless steel muffler features an acoustically tuned expansion chamber, engineered to deliver a deep, resonant tone while optimizing exhaust velocity. For off-road enthusiasts, the Hi-Tuck tip design is specifically developed to provide additional clearance for steep departure angles and technical terrain.

This exhaust is a direct bolt-on upgrade, utilizing factory-style flanges and hangers for a secure fit without requiring any cutting or permanent modifications to the vehicle. The assembly is 100% MIG-welded for race-proven strength and durability. Finishing the system is a 4" diameter 304 stainless steel black tip featuring a laser-etched aFe POWER logo.

• Tubing: Mandrel-bent 304 stainless steel (2.5" to 3" diameter)
• Muffler: High-flow 304 stainless steel with expansion chamber
• Tip: 4" black-finished 304 stainless steel with laser-etched logo
• Installation: Direct bolt-on using factory flange and hanger locations
• Construction: 100% MIG-welded for maximum durability
• Special Feature: Hi-Tuck design for improved off-road clearance
• Manufacturer Part Number: 49-36080-B

Fits 2024-2026 Toyota Land Cruiser (1958, Base, and First Edition).

Enhance the performance and sound of your vehicle with the aFe POWER cat-back exhaust system. Engineered for durability, this system is constructed from 2-1/2 inch to 3 inch mandrel-bent 304 stainless steel tubing. It features a high-flow 304 stainless steel muffler paired with an acoustically tuned expansion chamber, specifically designed to produce a deep, resonant exhaust tone while maintaining internal comfort.

This system is a direct bolt-on upgrade, utilizing factory-style flanges and hangers to ensure a precise fit without the need for cutting or modifications. Each unit is 100% MIG-welded for race-proven strength. To finish the look, a 4-inch diameter black 304 stainless steel tip is included, featuring a laser-etched aFe POWER logo for a custom appearance.

• Manufacturer Part Number: 49-36076-B
• Tubing Diameter: 2-1/2" to 3" mandrel-bent 304 stainless steel
• Tip Specification: 4" black 304 stainless steel with laser-etched logo
• Construction: 100% MIG-welded for maximum durability
• Installation: Direct bolt-on using factory mounting points and flanges
• Includes: High-flow muffler and acoustically tuned expansion chamber

Fits 2022-2026 Toyota Tundra (V6-3.4L / V6-3.5L) including SR, SR5, Limited, Platinum, 1794 Edition, TRD Pro, and Capstone models.

The aFe Vulcan Series cat-back exhaust system is designed to provide maximum exhaust flow and a custom look for your Tundra. This system is constructed from high-quality 2-1/2 inch to 3 inch mandrel-bent 304 stainless steel tubing for exceptional corrosion resistance and durability. The 100% MIG-welded construction ensures long-term structural integrity, while the rear side-exit design is finished with dual 4-inch black 304 stainless steel tips for a stealthy, aggressive appearance.

• Constructed from 2.5-inch to 3-inch mandrel-bent 304 stainless steel tubing
• Dual 4-inch 304 stainless steel black exhaust tips
• Rear side-exit configuration
• Utilizes factory-style flanges and hangers for a secure, bolt-on fit
• 100% MIG-welded for superior strength and durability
• Direct-fit installation requires no vehicle modifications
• Manufacturer Part Number: 49-36061-B

Fits 2001-2005 Lexus IS300 Base and Sportcross models (L6-3.0L).

Improve the exhaust flow and sound profile of your Lexus IS300 with the aFe Takeda cat-back exhaust system. This system is engineered from 2-1/2 inch mandrel-bent 304 stainless steel tubing to provide maximum exhaust velocity and long-term durability. At the heart of the system is a high-flow 304 stainless steel muffler that delivers a deep, resonant tone while maintaining corrosion resistance. The system is finished with a 4-1/2 inch diameter polished 304 stainless steel clamp-on tip featuring a laser-etched Takeda logo.

Designed for a hassle-free installation, this exhaust utilizes factory-style flanges and hangers to ensure a secure, direct bolt-on fit without the need for cutting or custom modifications. Every joint is 100% MIG-welded for race-proven strength, ensuring the system handles the rigors of daily driving and performance use.

• Manufacturer Part Number: 49-36058-P
• Construction: 2-1/2 inch mandrel-bent 304 stainless steel tubing
• Muffler: High-flow polished 304 stainless steel
• Tip: 4-1/2 inch polished 304 stainless steel clamp-on tip
• Installation: Direct bolt-on using factory mounting points
• Weld Quality: 100% MIG-welded for maximum durability

Fits 2019-2024 Toyota RAV4 (L4-2.5L).

The aFe POWER Takeda cat-back exhaust system delivers dyno-proven gains of up to +6 HP and +7 lbs. x Ft. TQ for the Toyota RAV4. Engineered for durability and performance, this system is constructed from 2-1/4 inch to 2-1/2 inch mandrel-bent 304 stainless steel tubing to maximize exhaust flow and resist corrosion. The high-flow 304 stainless steel muffler provides a mild, refined exhaust note that highlights the L4-2.5L engine without excessive cabin drone.

Installation is a straightforward bolt-on process using factory-style flanges and hangers, requiring no cutting or permanent vehicle modifications for a hassle-free fitment. Every Takeda exhaust is 100% MIG-welded for race-proven strength and utilizes state-of-the-art computer-aided design for high-tolerance factory alignment.

• Direct bolt-on fitment with no cutting or modifications required
• Construction: 2-1/4" - 2-1/2" mandrel-bent 304 stainless steel tubing
• Tips: Dual 4" diameter black 304 stainless steel clamp-on tips with etched Takeda logo
• Muffler: High-flow 304 stainless steel construction
• Performance: Dyno-tested gains of up to +6 HP and +7 lbs. x Ft. TQ
• Manufacturing: 100% MIG-welded for maximum durability
• Manufacturer Part Number: 49-36053-B

Fits 2012-2016 Subaru Impreza Base, Limited, Premium, and Sport models (2.0L).

Improve your vehicle's exhaust flow and sound profile with the aFe POWER Takeda cat-back exhaust system. This system is engineered from 2.25-inch mandrel-bent 304 stainless steel tubing to ensure maximum durability and consistent flow. A high-flow, polished 304 stainless steel muffler provides a deep, aggressive exhaust note while resisting corrosion in harsh conditions.

The system is finished with a 4-inch diameter polished 304 stainless steel clamp-on tip featuring a laser-etched Takeda logo. As a direct bolt-on upgrade, it utilizes factory-style flanges and hangers for a precise fitment that requires no cutting or custom modifications during installation.

• Tubing: 2.25-inch mandrel-bent 304 stainless steel
• Muffler: High-flow polished 304 stainless steel
• Tip: 4-inch diameter polished clamp-on with Takeda logo
• Construction: 100% MIG-welded for race-proven durability
• Installation: Direct bolt-on with factory-style flange and hangers
• Manufacturer Part Number: 49-36052-P

Fits 2012-2016 Subaru Impreza (2.0L).

The aFe POWER Takeda cat-back exhaust system is engineered to enhance the exhaust flow and acoustic profile of your 2012-2016 Subaru Impreza. Constructed from 2.25-inch mandrel-bent 304 stainless steel tubing for maximum durability, this system features a high-flow polished 304 stainless steel muffler that produces a deep, resonant tone. The system is completed with a 4-inch diameter black 304 stainless steel clamp-on tip featuring a laser-etched Takeda logo.

Designed for a direct bolt-on installation, this system utilizes factory-style flanges and hangers, requiring no cutting or modifications. Each Takeda exhaust is 100% MIG-welded for race-proven strength and utilizes state-of-the-art computer-aided design technology to ensure a precise, high-tolerance fitment.

• Manufacturer Part Number: 49-36052-B
• Tubing Diameter: 2.25-inch (2-1/4 IN) Mandrel-Bent
• Material: 304 Stainless Steel
• Tip Description: 4-inch Black 304 Stainless Steel Clamp-On
• Muffler: High-flow polished 304 Stainless Steel
• Installation: Direct bolt-on using factory hangers and flanges
• Construction: 100% MIG-welded

Fits 2021-2024 Toyota GR Supra Base models (2.0L). This aFe POWER Takeda cat-back exhaust system is engineered to optimize exhaust flow and sound on the 2.0L turbocharged Supra. Constructed from 2-1/2 inch to 3 inch mandrel-bent 304 stainless steel tubing with a brushed finish, this system is 100% TIG-welded for maximum durability and a precision fit.

This system features an integrated factory-style exhaust valve that utilizes the OE valve motor (not included), maintaining the vehicle's bi-modal functionality. In normal mode, gases are routed through a high-flow polished 304 stainless steel muffler for a deep, sporty tone; in Sport mode, the valve opens to bypass the muffler for a more aggressive, crackling note. A mitered merge collector is utilized to reduce turbulence and increase velocity, while the dual 4-1/2 inch polished stainless steel tips with laser-etched Takeda logos provide a refined aesthetic.

• Direct bolt-on installation using factory-style flange and hangers
• High-flow polished 304 stainless steel muffler
• Dyno-measured gains of up to +10 HP and +17 lbs. x Ft. TQ
• Dual 4-1/2" diameter polished 304 stainless steel exhaust tips
• Maintains factory exhaust valve functionality (requires factory motor)
• Manufacturer Part Number: 49-36050-P

Fits 2021-2024 Toyota GR Supra Base (2.0L). This aFe POWER Takeda cat-back exhaust system is engineered to optimize flow and sound for the turbocharged Supra, delivering dyno-proven gains of up to +10 HP and +17 lbs. x Ft. torque. Constructed from 2.5-inch to 3-inch mandrel-bent, brushed-finish 304 stainless steel tubing, this system is built for maximum durability and corrosion resistance.

The system features a high-flow 304 stainless steel polished muffler and a mitered merge collector to reduce turbulence and increase exhaust velocity. A built-in factory-style exhaust valve provides a true bi-modal experience: maintain a deep, sporty tone in normal mode or open the valve in sport mode for an aggressive, crackling sound. This system utilizes your factory valve motor (not included) and installs as a direct bolt-on using factory-style flanges and hangers with no cutting required.

• Direct bolt-on fitment for 2021-2024 Toyota GR Supra (2.0L)
• Constructed from 2.5" - 3" mandrel-bent 304 stainless steel tubing
• Dual 4.5" blue flame 304 stainless steel exhaust tips with laser-etched Takeda logo
• 100% TIG-welded for race-proven strength and durability
• Integrated exhaust valve reuses the factory valve motor
• Mitered merge collector improves throttle response and exhaust velocity
• Manufacturer Part Number: 49-36050-L