Fits Subaru BRZ and Toyota 86.

The Cusco Power Brace Rear Pillar is engineered to increase chassis rigidity by reinforcing the structural integrity of the rear cabin area. By connecting key points of the vehicle frame, this brace minimizes body flex during high-load cornering and spirited driving, resulting in more predictable handling and improved suspension feedback.

• Reduces rear-end chassis distortion for better structural integrity
• Optimizes suspension geometry by maintaining a stable mounting environment
• Constructed from high-strength steel for maximum durability and tension
• Finished in signature Cusco Blue powder coat for lasting corrosion resistance
• Direct bolt-on installation using factory mounting locations
• Manufacturer Part Number: 965 492 RP

The Cusco Power Brace Rear Lateral Sway Bar Bracket (965 492 RL) is engineered to increase chassis rigidity and improve the effectiveness of the rear suspension on the Subaru BRZ and Toyota 86. By reinforcing the factory mounting points, this brace prevents the lateral sway bar brackets from flexing under high cornering loads, ensuring the sway bar performs as intended during spirited driving or track use.

• Reduces chassis flex for sharper, more predictable handling response
• Reinforces the rear lateral sway bar mounting points to prevent deflection
• Constructed from high-strength steel for maximum durability and rigidity
• Finished in signature Cusco Blue powder coat for long-lasting corrosion resistance
• Designed as a direct bolt-on component for straightforward installation
• Manufacturer Part Number: 965 492 RL

Strengthen your vehicle's chassis and sharpen steering response with the Cusco Power Brace Front Lower Arm Plus. Engineered specifically for the Subaru BRZ and Toyota 86, this brace reinforces the front lower control arm mounting points to significantly reduce chassis flex during high-load cornering and aggressive driving.

By minimizing suspension geometry deflection, this brace ensures your alignment remains consistent, providing more precise feedback and improved turn-in. It is a vital upgrade for enthusiasts seeking to maximize the handling potential of the ZN6 and ZC6 platforms.

• Chassis Rigidity: Effectively ties the front lower arm mounts to the subframe for a more stable platform.
• High-Strength Construction: Fabricated from durable steel to withstand the rigors of track and performance street use.
• Corrosion Resistance: Finished in Cusco's signature blue powder coating for long-lasting protection and a professional aesthetic.
• Direct Fit: Designed as a bolt-on component that utilizes factory mounting points for a straightforward installation.
• Manufacturer Part Number: 965 492 FP

Fits 2013-2016 Scion FR-S, 2013-2017 Subaru BRZ, and 2017 Toyota 86.

The Cusco Power Brace Front Lower Arm is engineered to reinforce the chassis and minimize body flex during high-load cornering and spirited driving. By connecting the front lower arm mounting points, this brace increases structural rigidity, ensuring suspension geometry remains consistent. This results in more precise steering response and improved overall handling stability by preventing the chassis from deforming under stress.

• Increases chassis rigidity to maintain consistent suspension alignment
• Reduces lateral flex at the front lower control arm mounting points
• High-strength steel construction with Cusco's signature blue finish
• Direct bolt-on design utilizes factory mounting locations
• Manufacturer Part Number: 965 492 FL

Strengthen your chassis and improve steering precision with the Cusco PowerBrace Front Strut to Firewall Support. This brace is engineered to reduce bulkhead and firewall flex by triangulating the front strut towers to the vehicle's firewall. By reinforcing these critical load-bearing points, the PowerBrace helps maintain consistent alignment geometry during aggressive cornering and high-performance driving.

• Manufactured from high-strength steel with a 35mm outer diameter (OD) for maximum rigidity
• Non-adjustable design ensures a solid, zero-play connection between chassis points
• Finished in signature Cusco Blue powder coating for corrosion resistance and durability
• Direct bolt-on installation using factory mounting locations
• Manufacturer Part Number: 965 492 ERB

Designed to improve the structural integrity of the ZVW30 chassis, the Cusco Power Brace Rear End Underbrace (952 492 REN) reduces unibody flex during cornering and directional changes. By connecting key points on the rear section of the vehicle, this brace ensures the suspension geometry remains stable under load, leading to more predictable handling and improved steering response.

• Increases chassis rigidity to minimize unibody distortion
• High-strength steel construction for long-term durability
• Corrosion-resistant Cusco Blue powder-coated finish
• Direct bolt-on installation to factory mounting locations with no drilling required
• Specifically engineered for the Toyota Prius (ZVW30) chassis
• Manufacturer Part Number: 952 492 REN

Fits 2010-2015 Toyota Prius (ZVW30).

The Cusco Power Brace Center is engineered to enhance the structural integrity of the ZVW30 chassis by reinforcing the middle section of the floor pan. By connecting key structural points, this brace minimizes chassis flex and body torsion during cornering, ensuring the suspension maintains its intended geometry for more precise handling and improved road feel.

• Increases chassis rigidity for more predictable handling and stability
• Direct bolt-on installation utilizing existing factory mounting points
• Constructed from high-strength steel for maximum durability
• Signature Cusco Blue powder-coated finish for superior corrosion resistance
• Designed to clear factory components and maintain ground clearance
• Manufacturer Part Number: 951 492 C

Reinforce your Toyota Prius C or Aqua chassis with the Cusco Lower Arm Bar Ver. II (949 477 A). This 4-point multi-connection brace is designed to bridge the lower suspension pivot points, significantly reducing body flex and maintaining precise alignment geometry during high-load cornering.

By tying the front subframe together at four distinct points, this bar ensures your suspension components work more efficiently, delivering sharper steering response and improved front-end stability. The Ver. II design offers superior structural rigidity compared to standard 2-point bars, making it an essential upgrade for drivers seeking more predictable handling.

• 4-Point Multi-Connection: Bridges multiple pivot points for maximum structural reinforcement and rigidity.
• Direct Bolt-On: Specifically engineered for the Toyota Prius C and Aqua to utilize existing factory mounting points.
• Durable Construction: Lightweight yet high-strength steel tubing finished in signature Cusco blue powder coating for corrosion resistance.
• Improved Dynamics: Reduces subframe distortion to keep the front suspension geometry consistent under load.
• MPN: 949 477 A

Fits 2011-2012 Toyota Prius (Base, Two, Three, Four, Five).

The Cusco Lower Arm Bar Version 1 is engineered to increase chassis rigidity by connecting the lower arm mounting points at multiple locations. This reinforcement prevents unwanted body flex and keeps the suspension geometry aligned during aggressive cornering and heavy braking. By stabilizing the front subframe, this bar improves steering precision and front-end feedback, making it an essential upgrade for drivers looking to sharpen their vehicle's handling dynamics.

• Manufactured from high-strength tubular aluminum for optimal weight-to-rigidity ratio
• Finished in signature Cusco Blue powder coat for corrosion resistance and durability
• Direct bolt-on installation to existing factory mounting points; no welding required
• Low-profile design to maintain ground clearance
• Manufacturer Part Number: 942 475 A

Fits 2022-2024 Toyota GR86 (ZN8) and Subaru BRZ (ZD8).

The Cusco Rear Trunk Plus Power Brace is designed to increase chassis rigidity by reinforcing the rear structural points of the ZN8/ZD8 platform. By minimizing body flex during high-load cornering and spirited driving, this brace helps maintain consistent rear suspension geometry for improved handling response and a more composed feel.

Constructed from high-strength steel and finished in Cusco's signature blue powder coat, this brace is engineered for precision fitment and long-term durability. It serves as a direct bolt-on upgrade, utilizing existing factory mounting points in the trunk area to provide a noticeable increase in structural integrity without requiring permanent vehicle modifications.

• Manufacturer Part Number: 6C1 492 TP
• Enhances rear chassis rigidity and reduces structural torsion
• Durable signature Cusco Blue powder-coated finish
• Direct bolt-on installation to factory mounting points
• Optimized for the 2022+ GR86 and BRZ chassis

Fits 2022-2024 Toyota GR86 (ZN8) and Subaru BRZ (ZD8).

The Cusco Power Brace Front Cross Member (Rear Side) is engineered to increase chassis rigidity by reinforcing the vehicle's subframe structure. By bridging key points on the front cross member, this brace minimizes chassis flex during high-load cornering and aggressive driving, ensuring your suspension geometry remains consistent for more precise steering response and improved mechanical grip.

• Reinforces the front cross member (rear side) to reduce structural distortion
• Improves steering precision and overall handling stability
• High-strength steel construction designed for maximum durability
• Signature Cusco Blue powder-coated finish for superior corrosion resistance
• Direct bolt-on installation using existing factory mounting points
• Manufacturer Part Number: 6C1 492 FM

Fits 2022-2024 Subaru WRX models.

The Cusco Power Brace Rear Cross Member (6A9 492 RM) is designed to increase the structural integrity of the chassis by reinforcing the rear cross member mounting points. Under aggressive driving or track conditions, the factory chassis can experience flex, which negatively impacts suspension geometry and tire contact patches. This brace minimizes that distortion, providing more predictable handling and a more communicative rear end during high-load cornering.

• Reduces chassis flex for improved suspension performance and handling response
• Constructed from high-strength steel for maximum rigidity
• Finished in Cusco's signature blue powder coat for long-term corrosion resistance
• Direct bolt-on installation using existing factory mounting points; no drilling or welding required
• Manufacturer Part Number: 6A9 492 RM

Fits select 2018-2024 Subaru WRX, Crosstrek, and Forester models.

The Cusco Power Brace Front Cross Member (MPN 6A9 492 F) is engineered to enhance chassis rigidity by reinforcing the front subframe assembly. By minimizing structural flex under high-load conditions, such as aggressive cornering or heavy braking, this brace helps maintain proper suspension geometry for more precise steering response and improved handling stability.

• Increases front chassis stiffness to reduce subframe deflection and longitudinal movement
• Improves steering feedback and front-end precision during spirited driving
• Designed for a direct-fit installation on compatible Subaru global platforms
• High-strength construction to withstand the rigors of performance use
• Manufacturer Part Number: 6A9 492 F

Fits 2019+ Subaru Forester SK9 models (2.5L).

The Cusco Power Brace Rear Cross Member Side (6A8 492 RMS) is designed to strengthen the chassis of the Subaru Forester by reinforcing the rear subframe assembly. By tying the rear cross member to the vehicle body, this brace significantly reduces chassis flex and unwanted movement during cornering and heavy suspension loading. This ensures that your suspension geometry remains stable, providing more consistent handling and improved rear-end traction.

• Increases overall chassis rigidity and minimizes rear subframe deflection
• Fabricated from high-strength steel with Cusco's signature blue powder coat finish for durability and corrosion resistance
• Direct bolt-on installation utilizing existing factory mounting points for a secure fit
• Improves steering feedback and overall vehicle stability
• Includes all necessary hardware for installation
• Manufacturer Part Number: 6A8 492 RMS

Fits 2019+ Subaru Forester (SK9) models equipped with the 2.5L engine.

The Cusco Power Brace Rear Cross Member is engineered to minimize chassis flex by reinforcing the rear subframe mounting points. By tying the cross member more securely to the vehicle's body, this brace helps maintain suspension geometry under load, providing more predictable handling and increased rear-end stability whether you are on the road or navigating light trails.

• Chassis Reinforcement: Reduces structural deflection for improved handling response.
• Durable Construction: Fabricated from high-strength steel to withstand stresses of daily driving and spirited use.
• Corrosion Resistance: Finished in the signature Cusco Blue powder coat for long-lasting protection.
• Simple Installation: Designed as a direct bolt-on component that utilizes existing factory mounting points for a precise fit.
• Manufacturer Part Number: 6A8 492 RM

Fits 2015 Subaru WRX (Non-STI models only).

The Cusco Power Brace Front (6A5 492 FS) is engineered to reinforce the vehicle chassis by connecting critical stress points. By increasing structural rigidity, this brace minimizes body flex and distortion during high-load cornering, resulting in sharper steering response and more predictable handling characteristics. It is a direct bolt-on solution that provides a noticeable improvement in chassis feel for spirited driving and track applications.

• Location: Front Chassis
• Material: High-strength steel construction
• Finish: Signature Cusco Blue powder coat for corrosion resistance
• Installation: Utilizes factory mounting points for a precise fit
• Part Number: 6A5 492 FS

Fits 2015-2021 Subaru WRX and WRX STI.

The Cusco Power Brace Seat Rail Plus Set is engineered to increase the structural rigidity of the VA chassis by reinforcing the floor area around the seat rail mounting points. By tying these high-stress points together, this brace reduces floor flex and tunnel deformation during aggressive cornering, providing the driver with more consistent seat positioning and improved tactile feedback through the chassis.

• Increases overall chassis stiffness for sharper handling response
• Reduces floorboard flex under high-G cornering loads
• Complete set includes both Right and Left side braces
• Direct bolt-on installation to factory mounting points
• Signature Cusco Blue powder-coated finish for durability and corrosion resistance
• Manufacturer Part Number: 6A1 492 SP

Fits 2015 Subaru Impreza USDM models (VA Chassis).

The Cusco Power Brace Rear Member is designed to increase chassis rigidity by reinforcing the rear subframe area. By minimizing structural flex during aggressive cornering or heavy loading, this brace ensures the suspension geometry remains consistent, providing more predictable handling and improved rear-end stability.

• Manufactured from high-strength steel for maximum structural integrity
• Signature Cusco Blue powder-coated finish for long-lasting corrosion resistance
• Engineered to bolt directly to factory mounting points for a straightforward installation
• Reduces rear member movement to sharpen steering response and chassis feedback
• Manufacturer Part Number: 6A1 492 RM

Fits select 2008-2021 Subaru WRX, WRX STI, and Levorg (GRB, GVB, VAB, VAG, VMG, VM4).

The Cusco Power Brace Rear Lateral Sway Bar Bracket is engineered to eliminate chassis flex at the rear sway bar mounting points. Under heavy cornering, the factory subframe and mounting brackets can deflect, which reduces the effective rate of the sway bar and compromises handling precision. This brace reinforces the mounting area, ensuring your suspension maintains its geometry for sharper turn-in and more predictable rear-end behavior.

• Manufacturer Part Number: 6A1 492 RL
• Reduces rear subframe and sway bar mount deflection during high-load cornering
• Direct bolt-on installation into factory mounting points
• Heavy-duty steel construction for maximum rigidity
• Signature Cusco Blue powder-coated finish for corrosion resistance
• Essential for vehicles with upgraded aftermarket sway bars

Fits the 2015 Subaru Impreza USDM Model (VA Chassis).

The Cusco Power Brace Rear End is engineered to stiffen the vehicle's structural integrity by connecting key points of the chassis. By minimizing body flex under high-load cornering, this brace helps maintain consistent suspension geometry, leading to more predictable handling and improved rear-end stability. It is an essential upgrade for drivers looking to sharpen steering response and bridge the gap between street comfort and track-ready performance.

• Increases chassis rigidity and reduces body distortion
• Improves suspension response and cornering stability
• Direct bolt-on installation using factory mounting points
• Durable construction designed for high-stress automotive environments
• Manufacturer Part Number: 6A1 492 RE

Fits the 2015 Subaru Impreza USDM Model (VA Chassis).

The Cusco Power Brace Front Cross Member (6A1 492 M) is designed to increase chassis rigidity by reinforcing the front cross member area. By minimizing chassis flex during cornering and high-load maneuvers, this brace helps maintain consistent suspension geometry, providing the driver with more precise steering response and improved handling stability.

• Reduces chassis distortion under heavy cornering loads
• Improves steering feedback and front-end turn-in
• High-strength steel construction for maximum durability
• Signature Cusco Blue powder-coated finish for corrosion protection
• Direct bolt-on installation using factory mounting points
• Manufacturer Part Number: 6A1 492 M

Fits 2015 Subaru Impreza USDM models (VA Chassis).

The Cusco Power Brace Front Sides are engineered to increase chassis rigidity by reinforcing the vehicle's structural integrity at critical points. By minimizing body flex during aggressive cornering and high-load transitions, these braces ensure the suspension geometry remains consistent, resulting in more precise steering response and improved handling stability.

• Reduces chassis distortion and improves tactile steering feedback
• Constructed from high-strength steel for maximum structural durability
• Finished in signature Cusco Blue coating for long-term corrosion resistance
• Designed for a direct bolt-on installation using existing factory mounting points
• Manufacturer Part Number: 6A1 492 FS

Fits the 2015 Subaru Impreza USDM Model (VA Chassis).

The Cusco Power Brace Front Member is engineered to increase chassis rigidity by reinforcing the front crossmember. By minimizing structural flex during aggressive cornering and heavy braking, this brace improves steering response and maintains more consistent alignment geometry. It is a critical upgrade for drivers looking to sharpen the front-end feel of the VA chassis.

• Increases overall chassis stiffness and reduces front member distortion
• Constructed from high-strength steel for maximum durability
• Finished in signature Cusco Blue powder coat for corrosion resistance
• Direct bolt-on design utilizing factory mounting points
• Manufacturer Part Number: 6A1 492 FM

Fits 2008-2017 Subaru Impreza WRX/STI, BRZ, Scion FR-S, and Toyota 86.

The Cusco Power Brace Rear Member (MPN 692 492 RM) is engineered to increase chassis rigidity by reinforcing the rear subframe mounting points. By minimizing unwanted floor and subframe flex during high-lateral G cornering or hard acceleration, this brace ensures more consistent suspension geometry and sharper steering response. This component is essential for GH8, GRB, and GVB chassis owners looking to stabilize the rear end and improve overall vehicle predictability.

• Reinforces rear subframe to reduce chassis distortion
• Improves suspension alignment consistency under load
• High-strength steel construction for maximum durability
• Direct bolt-on installation to factory mounting points
• Finished in signature Cusco Blue powder coat
• Manufacturer Part Number: 692 492 RM

Fits 2008-2014 Subaru Impreza WRX and STI models, including 2.5 GT, WRX Premium, and WRX Limited (GH8, GRB, GVB).

The Cusco Power Brace Floor Rear is engineered to reinforce the chassis of your Subaru, specifically targeting floor flex that occurs during aggressive cornering and high-speed maneuvers. By bridging structural points on the underbody, this brace increases the vehicle's torsional rigidity. This ensures that the suspension geometry remains consistent under load, resulting in more precise steering response and improved overall handling predictability.

• Position: Rear Floor
• Construction: High-strength steel with Cusco Blue powder-coated finish
• Installation: Direct bolt-on to factory mounting points
• Benefits: Reduces chassis distortion and improves suspension efficiency
• Manufacturer Part Number: 692 492 R

Fits select 2005-2014 Subaru Impreza WRX/STI, Forester XT, and Legacy GT models. This Cusco Power Brace Front Cross Member is engineered to reinforce the vehicle's chassis by connecting vital points of the front subframe. By minimizing chassis flex during high-load cornering and aggressive driving, this brace maintains more consistent suspension geometry for improved steering response and front-end stability.

Constructed from high-strength steel and finished in Cusco's signature blue powder coat, this brace is designed for a precise bolt-on installation using factory mounting locations. It is an essential upgrade for Subaru owners looking to sharpen handling performance without sacrificing street drivability.

• Manufacturer Part Number: 692 492 M
• Reduces chassis distortion for more accurate alignment tracking
• Direct bolt-on installation to factory cross member points
• Durable steel construction with corrosion-resistant blue finish
• Optimizes steering feedback and turn-in precision

Fits 2008-2014 Subaru Impreza, WRX, and WRX STI models.

The Cusco Power Brace Front Member (692 492 FM) is engineered to significantly increase chassis rigidity at the front of the vehicle. By connecting key structural points on the GH8, GRB, and GVB platforms, this brace minimizes body flex during high-load cornering. This leads to more precise steering feedback and ensures your suspension geometry remains stable under stress.

A key advantage of this specific Cusco unit is its design: it is engineered to be compatible with the OEM bumper beam. This allows for a performance upgrade without sacrificing the front-end structural components or safety equipment of the factory assembly. Each brace is constructed from high-strength steel and finished in Cusco's signature blue powder coat for long-term durability and corrosion resistance.

• Manufacturer Part Number: 692 492 FM
• Position: Front Member
• Chassis Codes: GH8, GRB, GVB
• Construction: High-strength steel
• Finish: Cusco Blue
• Fitment: Retains factory bumper beam

The Cusco Power Brace Floor Center is engineered to increase the structural integrity of your vehicle by reinforcing the middle section of the chassis. Fits 2008-2014 Subaru Impreza WRX and STI models (including 2.5 GT, WRX, and STI trims), this brace minimizes body flex during high-load cornering and spirited driving, providing more stable handling and precise steering response.

Constructed for the GH8, GRB, and GVB chassis, this brace connects key structural points to distribute stress more effectively across the floor pan. Note that for proper installation, modification of the factory plastic under-cover is required to accommodate the bracing.

• Manufacturer Part Number: 692 492 C
• Position: Floor Center
• Chassis Compatibility: GH8, GRB, GVB
• Installation Note: Requires modification to the plastic under-tray cover
• Application: 2008-2014 Subaru Impreza WRX/STI/2.5 GT

Fits select 2008-2014 Subaru Impreza WRX, WRX STI, and 2.5 GT models (Turbo only).

The Cusco Type II Lower Arm Bar is a multi-point chassis reinforcement designed to bridge the lower suspension arm mounts. Unlike the simpler two-point Version 1 brace, this multi-point unit significantly increases front-end rigidity by preventing the lower arm pivot points from flexing under heavy cornering or braking loads. By maintaining consistent suspension geometry, this bar improves steering precision and turn-in response for more predictable handling.

• Position: Front
• Type: Type II (Multi-point bridge)
• Construction: High-strength tubular steel with Cusco Blue finish
• MPN: 692 477 A
• Installation: Bolts to factory mounting points; cannot be used in conjunction with Version 1 lower arm bar
• Compatibility: Fits Turbo models only

Fits select 2008-2014 Subaru Impreza WRX, WRX STI, and 2010-2012 Legacy 2.5GT.

The Cusco Power Brace Rear Member Side is engineered to increase chassis rigidity by reinforcing the rear suspension crossmember attachment points. By minimizing subframe movement and flex during high-load cornering, this brace helps maintain consistent suspension geometry for more predictable handling and improved rear-end stability. It is a critical upgrade for enthusiasts looking to eliminate the vague feeling often caused by OE chassis deflection.

• Construction: High-strength steel with an oval shaft cross-section for a high strength-to-weight ratio.
• Finish: Signature Cusco Blue powder coat for long-term corrosion resistance and durability.
• Installation: 100% bolt-on design that utilizes existing factory mounting points; no drilling or fabrication required.
• Chassis Codes: Specifically designed for GRB, GH8, GVB, SH5, BR9, and BM9 platforms.
• Manufacturer Part Number: 687 492 RS