Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Welcome to Atlus Automotive
Main menu
-
Performance
- Performance
-
Intake & Exhaust
- Intake & Exhaust
- Air Intake Systems
- Cold Air Intakes
- Air Intake Components
- Air Filters
- Air Filters - Drop In
- Air Filters - Direct Fit
- Air Filters - Universal Fit
- Pre-Filters
- Recharge Kits
- OE Replacement Air Intake Components
- Exhaust, Mufflers & Tips
- Catback
- Axle Back
- Muffler
- Tips
- Headers & Manifolds
- Connecting Pipes
- Catalytic Converter Direct Fit
- Catalytic Converter Universal
- Exhaust Collector
- Merge Collectors
-
Engine Upgrades
- Engine Upgrades
- Engine Components
- Camshafts
- Valve Springs, Retainers
- Head Gaskets
- Head Stud & Bolt Kits
- Main Stud & Bolt Kits
- Gasket Kits
- Engine Mounts
- Oil Catch Cans
- Oil Separators
- Throttle Bodies
- Throttle Body Spacers
- Crankshaft Dampers
- Valves
- Piston Rings
- Piston Sets - Forged - 4cyl
- Piston Sets - Cast - 4cyl
- Connecting Rods - 4Cyl
- Rotating Assemblies
- Stroker Kits
-
Turbo & Cooling
-
Fuel, Ignition & Tuning
-
Suspension & Handling
- Suspension & Handling
-
Lowering & Coilovers
-
Arms, Links & Alignment
-
Lift & Off-Road Suspension
-
Chassis & Bracing
-
Wheels & Tires
- Wheels & Tires
-
Wheels
-
Tires
-
Drivetrain & Clutch
-
Brakes
- Brakes
-
Pads & Rotors
-
Brake Kits & Calipers
-
Lines, Fluid & Hardware
-
Exterior & Lighting
- Exterior & Lighting
-
Lighting
-
Exterior Styling
-
Bumpers & Protection
-
Interior & Electronics
- Interior & Electronics
-
Interior Upgrades
-
Gauges & Electronics
-
Audio & Safety
-
Overland & Utility
- Overland & Utility
-
Bed Covers & Bed Gear
-
Steps, Racks & Storage
-
Trail & Towing
-
Maintenance & Garage
- Maintenance & Garage
-
Oil, Fluids & Filters
-
Detailing & Car Care
-
Tools & Fabrication
Your cart
Choose your Location
-
Atlus
1340 Cobb Dr, Unit 1, Eustis, FL 32736
352-234-4458
Mon – Fri: 8:30 am – 4:30 pm
Sat: 9:00 am – 2:00 pm
Sun: Closed
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
253 products
253 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
Mishimoto T-bolt clamps are a great solution for projects that need more clamping force than a standard worm gear clamp can provide. Built from the same stainless steel as our worm gear clamps, these T-bolt clamps are as durable as they are strong. The T-bolt design provides superior clamping power while the included locking nut keeps the clamp tight against any vibration. Available in a wide range of sizes, these clamps are an excellent choice for a variety of applications. Like all Mishimoto clamps, this T-bolt clamp is backed by our Mishimoto Lifetime Warranty.
- Securely clamps pipes, couplers, and hoses with an outer diameter from 1.65" (42.01 mm) to 1.97" (50.01 mm)
- Included self-locking nut prevents loosening with movement and vibration
- T-bolt design provides a strong and secure grip
Mishimoto T-bolt clamps are a great solution for projects that need more clamping force than a standard worm gear clamp can provide. Built from the same stainless steel as our worm gear clamps, these T-bolt clamps are as durable as they are strong. The T-bolt design provides superior clamping power while the included locking nut keeps the clamp tight against any vibration. Available in a wide range of sizes, these clamps are an excellent choice for a variety of applications. Like all Mishimoto clamps, this T-bolt clamp is backed by our Mishimoto Lifetime Warranty.
- Securely clamps pipes, couplers, and hoses with an outer diameter from 1.42" (35.99 mm) to 1.58" (40.01 mm)
- Included self-locking nut prevents loosening with movement and vibration
- T-bolt design provides a strong and secure grip
Mishimoto T-bolt clamps are a great solution for projects that need more clamping force than a standard worm gear clamp can provide. Built from the same stainless steel as our worm gear clamps, these T-bolt clamps are as durable as they are strong. The T-bolt design provides superior clamping power while the included locking nut keeps the clamp tight against any vibration. Available in a wide range of sizes, these clamps are an excellent choice for a variety of applications. Like all Mishimoto clamps, this T-bolt clamp is backed by our Mishimoto Lifetime Warranty.
- Securely clamps pipes, couplers, and hoses with an outer diameter from 1.14" (29.01 mm) to 1.38" (35 mm)
- Included self-locking nut prevents loosening with movement and vibration
- T-bolt design provides a strong and secure grip
With their high torque design, these band clamps offer a tighter seal versus conventional u-clamps and flat band clamps. Engineered for durability and long-lasting performance, this 10-pack of stainless steel clamps from MagnaFlow is built to withstand the toughest conditions. Each clamp is covered by MagnaFlow’s Limited Lifetime Warranty.
- Engineered To Create A 360 Degree Pressure Seal
- High-Strength Reaction Block
- Durable Stainless Steel
- Pack of 10
With their high torque design, these band clamps offer a tighter seal versus conventional u-clamps and flat band clamps. Engineered for durability and long-lasting performance, this 10-pack of stainless steel clamps from MagnaFlow is built to withstand the toughest conditions. Each clamp is covered by MagnaFlow’s Limited Lifetime Warranty.
- Engineered To Create A 360 Degree Pressure Seal
- High-Strength Reaction Block
- Durable Stainless Steel
- Pack of 10
$6.29
$5.82
$5.84
$3.69
$4.32
$3.42
$3.44
$3.24
$3.28
$4.58
$4.32
$83.79
$23.98
$33.08
Stainless-Steel Positive Locking Tie Kits secure exhaust wrap and solve the problem of needing a locking tie in high heat areas. The ties in this kit are designed for high heat applications. With it's self-locking design they are great for securing DEI exhaust wrap to pipes or any place a high strength tie is needed. UV and corrosion resistant they will last for many years under severe use. Locking Ties offer many other uses including bundling wires, hoses, and other forms of insulation products. Just slide end into locking mechanism and pull tight. Then slide the tool on the end of any 1/4 in. nut driver, engage the tie and twist. Constructed from high grade 316 stainless steel Capable of withstanding in excess of 2500°F Tensile Strength: 5/16 in. 200 lbs., 1/2 in. 350 lbs. 8 in. + 14 in. Pack includes eight 8 in. ties and four 14 in. ties Tool fits on the end of any 1/4 in. drive extension Tool works with all popular styles of stainless ties up to 1/2 in. wide Tool is made from hardened tool steel and black oxide coated for years of trouble-free use
Installation InstructionsInstallation Instructions
Installation Instructions
- Includes Tool To Make Tightening Ties Quick And Easy
- Can Withstand 2000 Degrees F
$14.33
Stainless-Steel Positive Locking Ties secure exhaust wrap and solves the problem of needing a locking tie in high heat areas. Stainless-Steel Positive Locking Ties are designed for high heat applications. With it's self-locking design they are great for securing DEI exhaust wrap to pipes or any place a high strength tie is needed. UV and corrosion resistant they will last for many years under severe use. Locking Ties offer many other uses including bundling wires, hoses, and other forms of insulation products. Just slide end into locking mechanism and pull tight. Made from 316 Stainless Steel Tensile Strength: 5/16 in. 200 lbs., 1/2 in. 350 lbs. Capable of withstanding temperatures in excess of 2500°F Fits up to 4 in. O.D.
Installation InstructionsInstallation Instructions
- Capable Of Withstanding Heat In Excess Of 2500 Degrees F
- Tensile Strength 5/16 in. 200 lbs 1/2 in. 350 lbs
- Made From 316 Stainless Steel
- 4 - 12mm -1/2in x 14in Ties
$38.87
Stainless-Steel Positive Locking Ties secure exhaust wrap and solves the problem of needing a locking tie in high heat areas. Stainless-Steel Positive Locking Ties are designed for high heat applications. With it's self-locking design they are great for securing DEI exhaust wrap to pipes or any place a high strength tie is needed. UV and corrosion resistant they will last for many years under severe use. Locking Ties offer many other uses including bundling wires, hoses, and other forms of insulation products. Just slide end into locking mechanism and pull tight. Made from 316 Stainless Steel Tensile Strength: 5/16 in. 200 lbs., 1/2 in. 350 lbs. Capable of withstanding temperatures in excess of 2500°F Fits up to 6 in. O.D.
Installation InstructionsInstallation Instructions
- Capable Of Withstanding Heat In Excess Of 2500 Degrees F
- Tensile Strength 5/16 in. 200 lbs 1/2 in. 350 lbs
- Made From 316 Stainless Steel
- 10 - 7mm x 20in Ties
$13.13
Stainless-Steel Positive Locking Ties secure exhaust wrap and solves the problem of needing a locking tie in high heat areas. Stainless-Steel Positive Locking Ties are designed for high heat applications. With it's self-locking design they are great for securing DEI exhaust wrap to pipes or any place a high strength tie is needed. UV and corrosion resistant they will last for many years under severe use. Locking Ties offer many other uses including bundling wires, hoses, and other forms of insulation products. Just slide end into locking mechanism and pull tight. Made from 316 Stainless Steel Tensile Strength: 5/16 in. 200 lbs., 1/2 in. 350 lbs. Capable of withstanding temperatures in excess of 2500°F Fits up to 4 in. O.D.
Installation InstructionsInstallation Instructions
- Capable Of Withstanding Heat In Excess Of 2500 Degrees F
- Tensile Strength 5/16 in. 200 lbs 1/2 in. 350 lbs
- Made From 316 Stainless Steel
- 4 - 7mm x 14in Ties
$20.81
Stainless-Steel Positive Locking Ties secure exhaust wrap and solves the problem of needing a locking tie in high heat areas. Stainless-Steel Positive Locking Ties are designed for high heat applications. With it's self-locking design they are great for securing DEI exhaust wrap to pipes or any place a high strength tie is needed. UV and corrosion resistant they will last for many years under severe use. Locking Ties offer many other uses including bundling wires, hoses, and other forms of insulation products. Just slide end into locking mechanism and pull tight. Made from 316 Stainless Steel Tensile Strength: 5/16 in. 200 lbs., 1/2 in. 350 lbs. Capable of withstanding temperatures in excess of 2500°F Fits up to 2 in. O.D.
Installation InstructionsInstallation Instructions
- Capable Of Withstanding Heat In Excess Of 2500 Degrees F
- Tensile Strength 5/16 in. 200 lbs 1/2 in. 350 lbs
- Made From 316 Stainless Steel
- 8 - 7mm x 9in Ties
$14.99
The tightest holding locking tie on the market! Engineered for maximum grip and lasting tension in any application, this unique spring-wave pattern flexes as you tighten, maintaining constant pressure. Constructed from high-grade 316 stainless steel, Lokjaw Locking Ties lock down securely to prevent loosening, slipping, or failure. They're ideal for high-heat, high-vibration environments and deliver a strong, permanent hold for a cleaner, more professional installation.
Installation Instructions- Unique spring-wave pattern flexes as you tighten, maintaining constant pressure
- Delivers a strong, permanent hold for a cleaner, more professional installation
- Engineered for maximum grip and lasting tension in any application
- Locks down securely to prevent loosening, slipping, or failure
- Ideal for high-heat, high-vibration environments
- Constructed from high-grade 316 stainless steel
$28.62
Stainless-Steel Locking Ties secure exhaust wrap and solves the problem of needing a locking tie in high heat areas. Stainless-Steel Locking Ties are perfect for securing wrap to pipes with its self-locking design. Locking Ties offer many other uses including bundling wires, hoses, and other forms of insulation products. Just slide end into locking mechanism and pull tight. Constructed from high grade 316 stainless steel Capable of withstanding in excess of 2500°F 100lbs tensile strength Eight 8 in. ties, fitting up to 2 in. O.D. Four 14 in. ties, fitting up to 4 in. O.D.
Installation InstructionsInstallation Instructions
- Capable Of Withstanding Heat In Excess Of 2500 Degrees F
- Pack Contains 4 - 16 in. Ties And 8 - 8 in. Ties
- Constructed Of High Grade 316 Stainless Steel
- Strong 100 lb. Tensile Strength
$19.99
The tightest holding locking tie on the market! Engineered for maximum grip and lasting tension in any application, this unique spring-wave pattern flexes as you tighten, maintaining constant pressure. Constructed from high-grade 316 stainless steel, Lokjaw Locking Ties lock down securely to prevent loosening, slipping, or failure. They're ideal for high-heat, high-vibration environments and deliver a strong, permanent hold for a cleaner, more professional installation.
Installation Instructions- Unique spring-wave pattern flexes as you tighten, maintaining constant pressure
- Delivers a strong, permanent hold for a cleaner, more professional installation
- Engineered for maximum grip and lasting tension in any application
- Locks down securely to prevent loosening, slipping, or failure
- Ideal for high-heat, high-vibration environments
- Constructed from high-grade 316 stainless steel
$33.85
Stainless-Steel Locking Ties secure exhaust wrap and solves the problem of needing a locking tie in high heat areas. Stainless-Steel Locking Ties are perfect for securing wrap to pipes with its self-locking design. Locking Ties offer many other uses including bundling wires, hoses, and other forms of insulation products. Just slide end into locking mechanism and pull tight. Constructed from high grade 316 stainless steel Capable of withstanding in excess of 2500°F 100lbs tensile strength Fits up to 6 in. O.D.
Installation InstructionsInstallation Instructions
- Capable Of Withstanding Heat In Excess Of 2500 Degrees F
- Constructed Of High Grade 304 Stainless Steel
- Strong 100 lb. Tensile Strength
$12.43
Stainless-Steel Locking Ties secure exhaust wrap and solves the problem of needing a locking tie in high heat areas. Stainless-Steel Locking Ties are perfect for securing wrap to pipes with its self-locking design. Locking Ties offer many other uses including bundling wires, hoses, and other forms of insulation products. Just slide end into locking mechanism and pull tight. Constructed from high grade 316 stainless steel Capable of withstanding in excess of 2500°F 100lbs tensile strength Fits up to 4 in. O.D.
Installation InstructionsInstallation Instructions
- Capable Of Withstanding Heat In Excess Of 2500 Degrees F
- Constructed Of High Grade 304 Stainless Steel
- Strong 100 lb. Tensile Strength
$19.23
Stainless-Steel Locking Ties secure exhaust wrap and solves the problem of needing a locking tie in high heat areas. Stainless-Steel Locking Ties are perfect for securing wrap to pipes with its self-locking design. Locking Ties offer many other uses including bundling wires, hoses, and other forms of insulation products. Just slide end into locking mechanism and pull tight. Constructed from high grade 316 stainless steel Capable of withstanding in excess of 2500°F 100lbs tensile strength Fits up to 2 in. O.D.
Installation InstructionsInstallation Instructions
- Capable Of Withstanding Heat In Excess Of 2500 Degrees F
- Constructed Of High Grade 304 Stainless Steel
- Strong 100 lb. Tensile Strength
Use these adapters that have Male Ball Flare Outlets with Borla(r) Cat-Back(tm) system 140723 and REUSE O.E. Tips that have a Female Ball Flare Inlet or optional Borla(r) tips 60729, 60729BC, 60729CFBA. Tips NOT included. Adapters have 2.75" I.D. Inlets. Contains 2) Adapters and 2) Clamps. Each adapter is built from premium T-304 stainless steel, superior to T-400 series knockoffs (such as 409), to give you the absolute best in performance and durability. Precision computer numerical control (CNC) manufacturing ensures an accurate fit. Best of all, Borla(r) stands behind every adapter with a Million-Mile Warranty. Just what you'd expect from the world's most experienced (and most winning) exhaust brand.
Installation Instructions- Use with Borla(r) Cat-Back(tm) System 140723 and REUSE O.E. Tips with Female Ball Flare on Inlet or optional Borla(r) tips
- Reuse O.E. tips or optional Borla(r) tips 60729, 60729BC, or 60729CFBA
- Contains (2) Adapters and (2) Clamps
- Tips NOT included
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2018-2023 | Dodge | Charger | R/T |
Showing 240/253
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.