CORSA Performance Air Intake Systems are designed for one thing, Performance. By optimizing airflow and utilizing free-flowing filters, CORSA Performance Intakes outflow stock systems to increase overall performance while protecting your engine. This air intake comes equipped with CORSAs Latest Filtration Technology, DryTech 3D, a high flow, no oil, low maintenance (up to 50K miles) solution to your filtration needs. DryTech filters are nearly 98% efficient and mazimize airflow to increase vehicle performance. Simply vaccuum the surface for a quick clean or rinse with soap and water then let dry, occassionally to maintain peak filtration performance. Whether On-Road or Off, CORSA Performance has you covered.

• Drytech Filtration Is Ideally Suited For Maximizing Airflow And Performance While Reducing Maintenance Intervals
• Corsas Air Boxes Are Built Rugged And Designed To Protect The Filter From The Elements
• Features Corsas Latest Filtration Technology/Drytech 3D
• Easy Bolt On Installation - Installs in Under 1 Hour
• Smoked Acrylic See-Through Airbox Lid
• Outflows Stock Air Intake
• Lifetime Warranty
• Made In The USA

This Part Fits:

CORSA Performance Air Intake Systems are designed for one thing, Performance. By optimizing airflow and utilizing Donaldson Powercore Ultra-Web free-flowing air filters, CORSA Performance Intakes outflow stock systems to increase overall vehicle performance while providing the ultimate in engine protection. Donaldson PowerCore(R) Ultra Web Air Filters are 99.96% efficient and offer an unmatched combination of maintenance-free air filtration (up to 150K miles) and performance in the marketplace today.

• Ultra-Web Filtration Technology for Maximum Engine Protection
• Maximum Protection in Dry Off-Road Driving Conditions
• Easy Bolt On Installation - Installs in Under 1 Hour
• Built Rugged And Designed To Protect The Filter
• Smoked Acrylic See-Through Airbox Lid
• Outflows Stock Air Intake
• Lifetime Warranty
• Made In The USA

This Part Fits:

CORSA Performance Air Intake Systems are designed for one thing, Performance. By optimizing airflow and utilizing free-flowing filters, CORSA Performance Intakes outflow stock systems to increase overall performance while protecting your engine. This intake features Volants high performance , 5 layer oiled cotton gauze air filters are made of the highest quality textiles, pleated between a top and bottom aluminum screen. Each filter comes pre-oiled and ready for use. This filter is specifically designed to allow the highest air flow rate possible for maximum power gains but deliver a very long filter life and maintenance intervals (up to 40K miles depending on driving conditions). Whether On-Road or Off, CORSA Performance has you covered.

• Easy Bolt On Installation - Installs in Under 1 Hour
• Built Rugged And Designed To Protect The Filter
• Smoked Acrylic See-Through Airbox Lid
• Outflows Stock Air Intake
• Designed For Performance
• Lifetime Warranty
• Made In The USA
• Free Flowing

This Part Fits:

The CORSA Performance Limited Edition 2016+ Camaro SS Carbon Fiber air intake features multi-layer twill weave carbon fiber construction and pairs aesthetics and engineering for maximum strength and performance. Compared to stock; the optimized shape of the CORSA Performance air intake duct, combined with high-performance filtration, increases overall performance and fuel economy. Dyno tuned for maximum results, the CORSA Performance Camaro SS Carbon Fiber Air Intake produces up to an additional 9HP and 9 FT LBS TQ @5375RPM from the 6.2L LT1 V8 engine without a tune. The SS air intake comes available in both DryTech and oiled filtration. The Corsa Performance SS carbon fiber Intake is backed by a Limited Lifetime Warranty to the original purchaser.*Filters are backed by a 1 year warranty.

• The Corsa Performance Traditional Twill Weave 1X1 Carbon Fiber Construction Offers Unmatched Styling
• Features Premium Hardware Including/Multi-Ply Silicone Hoses And T-Bolt Style Hose Clamps
• Multi-Layer Carbon Fiber Construction Provides Lasting Durability And Performance
• Black Powder Coated Aluminum Heat Shield Seals Flush To Hood Blocking Engine Heat
• Features Drytech 3D/No Oil/Synthetic Fiber/High Flow Performance Air Filter
• 99 Percent Filtration Efficiency Protects Engine While Enhance Performance
• Dyno Proven To Deliver Up To 9Hp And 9 Lbs Ft Of Torque At 5375Rpm
• Features All Hardware And Instructions Necessary For Install
• Backed By Corsas Limited Lifetime Warranty-Filters 1 Year
• Installs In Under An Hour
• No Tune Required

This Part Fits:

The CORSA Performance Limited Edition 2016+ Camaro SS Carbon Fiber air intake features multi-layer twill weave carbon fiber construction and pairs aesthetics and engineering for maximum strength and performance. Compared to stock; the optimized shape of the CORSA Performance air intake duct, combined with high-performance filtration, increases overall performance and fuel economy. Dyno tuned for maximum results, the CORSA Performance Camaro SS Carbon Fiber Air Intake produces up to an additional 9HP and 9 FT LBS TQ @5375RPM from the 6.2L LT1 V8 engine without a tune. The SS air intake comes available in both DryTech and oiled filtration. The Corsa Performance SS carbon fiber Intake is backed by a Limited Lifetime Warranty to the original purchaser.*Filters are backed by a 1 year warranty.

• The Corsa Performance Traditional Twill Weave 1X1 Carbon Fiber Construction Offers Unmatched Styling
• Features Premium Hardware Including/Multi-Ply Silicone Hoses And T-Bolt Style Hose Clamps
• Features Maxflow 5/Re-usable 5 Layer Oiled Cotton Gauze High Flow Performance Air Filter
• Multi-Layer Carbon Fiber Construction Provides Lasting Durability And Performance
• Black Powder Coated Aluminum Heat Shield Seals Flush To Hood Blocking Engine Heat
• 99 Percent Filtration Efficiency Protects Engine While Enhance Performance
• Dyno Proven To Deliver Up To 9Hp And 9 Lbs Ft Of Torque At 5375Rpm
• Features All Hardware And Instructions Necessary For Install
• Backed By Corsas Limited Lifetime Warranty-Filters 1 Year
• Installs In Under An Hour
• No Tune Required

This Part Fits:

The CORSA Performance Dodge Challenger, Charger R/T & Chrysler 300 5.7L V8 Carbon Fiber air intake is made from pure 100% carbon fiber construction and pairs aesthetics and engineering for maximum strength and performance. Compared to stock; the optimized shape of the CORSA Performance air intake duct, combined with high-performance filtration, increases overall performance and fuel economy. Dyno tuned for maximum results, the CORSA Performance Carbon Fiber Air Intake produces up to an additional 15HP @5250RPM and 18 FT LBS TQ @4000RPM from the 5.7L Naturally Aspirated HEMI(R) engine without a tune. The R/T(R) intake comes available in both DryTech and oiled filtration. The Corsa Performance Chalenger, Charger R/T carbon fiber Intake is backed by a Limited Lifetime Warranty to the original purchaser.*Filters are backed by a 1 year warranty.

• Features Premium Hardware Including/Multi-Ply Silicone Hoses And T-Bolt Style Hose Clamps
• The Corsa Performance 1X1 Twill Carbon Fiber Weave Construction Offers Unmatched Styling
• Features Drytech 3D/No Oil; Synthetic Fiber/High Flow Performance Air Filter
• Dyno Proven To Deliver Up To 10Hp And 8 Lbs Ft Of Torque At 3300Rpm
• Carbon Fiber Heat Shield Seals Flush To Hood Blocking Engine Heat
• Features All Hardware And Instructions Necessary For Install
• Backed By Corsas Limited Lifetime Warranty-Filters 1 Year
• Synthetic Fiber/High Flow Performance Air Filter
• Features Drytech 3D/No Oil
• Installs In Under An Hour
• No Tune Required

This Part Fits:

The CORSA Performance Dodge Challenger, Charger R/T & Chrysler 300 5.7L V8 Carbon Fiber air intake is made from pure 100% carbon fiber construction and pairs aesthetics and engineering for maximum strength and performance. Compared to stock; the optimized shape of the CORSA Performance air intake duct, combined with high-performance filtration, increases overall performance and fuel economy. Dyno tuned for maximum results, the CORSA Performance Carbon Fiber Air Intake produces up to an additional 15HP @5250RPM and 18 FT LBS TQ @4000RPM from the 5.7L Naturally Aspirated HEMI(R) engine without a tune. The R/T(R) intake comes available in both DryTech and oiled filtration. The Corsa Performance Chalenger, Charger R/T carbon fiber Intake is backed by a Limited Lifetime Warranty to the original purchaser.*Filters are backed by a 1 year warranty.

• Features Premium Hardware Including/Multi-Ply Silicone Hoses And T-Bolt Style Hose Clamps
• The Corsa Performance 1X1 Twill Carbon Fiber Weave Construction Offers Unmatched Styling
• Features Maxflow 5/Re-usable 5 Layer Oiled Cotton Gauze High Flow Performance Air Filter
• Dyno Proven To Deliver Up To 10Hp And 8 Lbs Ft Of Torque At 3300Rpm
• Carbon Fiber Heat Shield Seals Flush To Hood Blocking Engine Heat
• Features All Hardware And Instructions Necessary For Install
• Backed By Corsas Limited Lifetime Warranty-Filters 1 Year
• Installs In Under An Hour
• No Tune Required

This Part Fits:

The CORSA Performance Dodge Challenger, Charger, & Chrysler 300 SRT 6.4L V8 Carbon Fiber air intake is made from pure 100% carbon fiber construction and pairs aesthetics and engineering for maximum strength and performance. Compared to stock; the optimized shape of the CORSA Performance air intake duct, combined with high-performance filtration, increases overall performance and fuel economy. Dyno tuned for maximum results, the CORSA Performance Hellcat(R) Carbon Fiber Air Intake produces up to an additional 10HP and 8 FT LBS TQ @3300RPM from the 6.4L Naturally Aspirated HEMI(R) engine without a tune. The SRT(R) intake comes available in both DryTech and oiled filtration. The Corsa Performance Challenger, Charger SRT carbon fiber Intake is backed by a Limited Lifetime Warranty to the original purchaser.*Filters are backed by a 1 year warranty.

• Features Premium Hardware Including/Multi-Ply Silicone Hoses And T-Bolt Style Hose Clamps
• The Corsa Performance 1X1 Twill Carbon Fiber Weave Construction Offers Unmatched Styling
• Features Maxflow 5/Re-usable 5 Layer Oiled Cotton Gauze High Flow Performance Air Filter
• Dyno Proven To Deliver Up To 10Hp And 8 Lbs Ft Of Torque At 3300Rpm
• Carbon Fiber Heat Shield Seals Flush To Hood Blocking Engine Heat
• Features All Hardware And Instructions Necessary For Install
• Backed By Corsas Limited Lifetime Warranty-Filters 1 Year
• Installs In Under An Hour
• No Tune Required

This Part Fits:

The CORSA Performance 2018+ Ford Mustang GT Open Element Carbon Fiber air intake features a 100% carbon fiber air duct and black powder coat aluminum heat shield pairing aesthetics and engineering for maximum strength and performance. Compared to stock; the optimized shape of the CORSA Performance air duct, combined with high-performance filtration, increases overall performance and fuel economy. CORSAs application specific heat shield fits seamlessly into the engine bay to block engine heat reducing air temps. Dyno tuned for maximum results, the CORSA Performance Mustang GT Carbon Fiber Air Intake produces up to an additional 20HP and 11 FT LBS TQ from the Coyote 5.0L V8 engine without a tune. The Mustang GT intake comes available in both DryTech and oiled filtration. Corsa Performance carbon fiber air Intakes are backed by a Limited Lifetime Warranty to the original purchaser.*Filters are backed by a 1 year warranty.

• Features Premium Hardware Including/Multi-Ply Silicone Hoses And T-Bolt Style Hose Clamps
• 100 Percent Carbon Fiber Construction Offers Unmatched Styling And Resists Heat Soak
• Black Powder Coated Aluminum Heat Shield Seals Flush To Hood Blocking Engine Heat
• Features Drytech 3D/No Oil/Synthetic Fiber/High Flow Performance Air Filter
• Features All Hardware And Instructions Necessary For Install
• Dyno Proven To Deliver Up To 20hp And 11 Lbs Ft Of Torque
• Backed By A Limited Lifetime Warranty
• Outflows Stock Intake By 18 Percent
• Installs In Under An Hour
• No Tune Required

This Part Fits:

This 360-degree radial flow air filter features a 3-1/2" flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. It features an aFe Power design inspired by European vehicles. The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive Air Intake sound. It’s design incorporates the OEM air scoop to ensure that it gets the coldest air available. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, and hardware are included. Its revolutionary design, featuring our unique filter-to-housing interface, uses half the number of parts of a traditional cold air intake system. Included billet aluminum fittings allows stock connections to transfer over seamlessly.

• Innovative Filter-to-Housing Interface and Minimal Hardware for Fast and Easy Installation
• Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
• One-Piece Housing With Integrated Air Scoop to Capture the Coldest Air Possible
• Washable and Reusable Pro 5R Air Filter for Maximum Performance
• Dyno-Proven Gains up to +14 HP & +14 Lbs. x Ft. TQ
• Measured Flow: 335 CFM @ 7” H20
• Outflows Factory Intake by 24%

This Part Fits:

Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you've been craving. The SP series of cold air intakes is Injen's flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world's first tuned air intake system and holds four (4) patents on the tuning process of an intake system ? something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology's patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patents 7,757,548 and 7,721,699), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. , , The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. , , Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You're in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty!

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Smooth intake piping eliminates restrictions and improves airflow
• Dyno Proven gains of up to 8 hp and 7 lb-ft. of torque
• Fully serviceable Injen SuperNano-Web dry air filter
• Optional hydroshield part number 1033BLK or 1033RED
• Features Injen's patented MegaRam (MR) Technology
• Provides power gains while maintaining A/F ratios
• Features Injen's patented Air Fusion Technology
• Replacement air filter part number X-1056-BB
• Aggressive engine tone under full throttle
• Injen Technology Limited Lifetime Warranty
• Increased Torque Up To 7 ft./lbs.
• 6061-T6 aluminum intake tubing
• Available in multiple finishes
• Made in Pomona, California USA
• No additional tuning required
• Short Ram Air Intake Design

This Part Fits:

This 6” tall 360-degree radial flow air filter features a 3.5" flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. Its inverted top makes for more filter surface area, resulting in longer service intervals. This media is best suited for street use. The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE) polymer, features our patent-pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. Stainless-steel clamps are included for strength, and a silicone bellows coupling allows for ample flexibility. This is a direct bolt-on kit that requires no cutting or drilling on OEM parts.

• Durable XLPE Construction and Sealed Housing Protects From Impact, Extreme Temperatures, and Other Elements
• Premium Stainless Steel Clamps and a Bellows Coupling Provide a Secure Seal
• Clear Sight Window for Convenient Filter Inspection Without Disassembly
• Utilizes Factory Mounting Locations for an Easy and Secure Installation
• Incorporates the Factory Air Inlet Scoop with No Additional Hardware
• Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
• Dyno-Proven Gains up to +7 HP and +6 Lbs. x Ft. TQ
• Measured Flow: 250 CFM @ 7" H2O
• Outflows Factory Intake by 67%

This Part Fits:

Large Five Layer Performance Air Filter:Momentum’s innovative filter-to-housing interface was built to feature the largest air filter possible. This 9" tall 360-degree radial flow air filter features our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street use. Its inverted top makes for more filter surface area, resulting in longer service intervals.

• Durable XLPE Construction and Sealed Housing Protects From Impact, Extreme Temperatures, and Other Elements
• Clear Sight Window for Convenient Filter Inspection Without Disassembly
• Washable and Reusable Pro 5R Air Filter for Maximum Performance
• Optional Auxiliary Air Inlet for Maximum Air Flow
• Premium Hardware Provides a Secure Seal

This Part Fits:

Large Three Layer Performance Air Filter: This 360-degree radial flow air filter features a 3-1/4" x 6-1/2" flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use.Unique Sealed Housing: The one-piece sealed housing, constructed of XLPE (cross-linked polyethylene) polymer, is used to minimize the number of components and ensure the coolest air intake charge available.Dyno-Tuned Intake Tube: This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable.Hassle-Free Installation: This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps and hardware are included. Its revolutionary design uses half the number of parts of a traditional cold air intake system.

• Oversized, Heat-Resistant Sealed Housing Gathers Larger Amounts of Cool Air
• Washable and Reusable Pro DRY S Air Filter
• Measured Flow: 345 CFM @ 7 IN H2O
• Outflows Factory Intake by 13%
• +42 lbs. x ft. TQ & +21 HP

This Part Fits:

Sealed, molded plastic or aluminum cover provides factory style with less intake noise than open systems. Our specially engineered air box openings pull cold air from outside the engine compartment increasing engine efficiency and producing greater performance gain. The cross-linked polypropylene rotomolded plastic air box replaces restrictive stock air box and ensures a consistent supply of cold fresh air; built-in ram scoop forces cold, outside air to filter. Precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

• Repl. Factory Intake For Improved HP/Torque/Styling
• Rotomolded Plastic Tube For Maximum Air Flow
• Uses Pro 5R Filter For Maximum Air Flow
• Improved Throttle Response
• 2 Year Limited Warranty
• 69% cfm Flow Gain

This Part Fits:

Unique One-Piece Housing: The smooth one-piece sealed housing with auxiliary air scoop is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A urethane plug is also included for those cold weather applications where you want to block the auxiliary air scoop. A large, clear sight window is used for a hassle-free filter inspection and an aggressive style. (US PAT 9440175) For Filter-to-Housing Interface. Roto-mold Tube: This System uses a two piece CAD designed, dyno-tuned, roto-mold intake tube to achieve maximum power gains while maintaining a perfect fit. Huge 5-Layer Performance Air Filter: The Momentum GT is designed around a pre-oiled, large 8" Tall round inverted top 360 degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. The unique air filter to housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process. Premium Hardware: Premium stainless steel T-bolt clamps and a urethane hump coupler are used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation.

• Pro DRY S Oil-Free 3 Layer Progressively Finer Synthetic Media
• Built In Sight Window Provides Easy Inspection Of Filter
• Unique Filter-To-Housing Interface For Easy Servicing
• 1-Piece Sealed Housing w/Auxiliary Air Scoop
• Outflows Factory Intake By Up To 36%
• CAD-Designed Roto-Molded Intake Tube

This Part Fits:

Bringing you the next generation of intakes, the Momentum GT sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing with a tire tread top, to the massive air filter and premium hardware, we spared no expense to give you the best intake on the market.

• Pro 5R Oiled 5 Layer Progressively Finer Mesh Cotton Gauze Filter
• Built In Sight Window Provides Easy Inspection Of Filter
• Unique Filter-To-Housing Interface For Easy Installation
• High Quality 1-Pc. Roto-Molded Sealed Housing
• Outflows Factory Intake By Up To 39%
• CAD Designed Roto-Molded Intake Tube
• No Cutting Or Drilling
• Faster Installation

This Part Fits:

Unique One-Piece High Quality Housing W/ Sight Window: A custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the air box. The roto-molded housing is made out of black cross-linked polyethylene. A urethane plug is also included if you wish to block off the auxiliary air inlet. High Quality Tube: This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded designed intake tube to fit with the stock mechanical fan and achieve maximum power gains while maintaining a perfect fit. Large 3-Layer Performance Air Filter: This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a massive oval flange and is 9" tall with an inverted top. The Pro DRY S performance air filter features 3-layers of progressive finer porosity synthetic media providing maximum convenience with 100% polyurethane frame for long life and multiple cleaning cycles. Premium Hardware: High quality premium clamps ensures the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.

• 5 Layer Progressively Finer Mesh Cotton Gauze Oiled Media Filter
• High Quality One-Piece Sealed Housing w/Auxiliary Air Inlet
• No Cutting Or Drilling On Factory Parts For Faster Install
• Unique Filter-To-Housing Interface For Easy Installation
• Outflows Factory Intake By Up To 30%
• CAD Designed Roto-Molded Intake Tube
• 30% Flow Increase

This Part Fits:

Bringing you the next generation of intakes, the Momentum GT sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing with a tire tread top, to the massive air filter and premium hardware, we spared no expense to give you the best intake on the market.

• Unique Housing To Filter Interface-Patent Pending
• Huge 5 in. Flange w/Inverted Top Air Filter
• 5-Layer Progressive Cotton Gauze Media
• Auxiliary Air Scoop w/Urethane Plug
• Stainless Steel T-Bolts Clamps
• Hassle Free Installation
• 2 Year Limited Warranty
• Washable And Reusable
• Pro 5R Filter Media
• Rotomolded Tube

This Part Fits:

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us.

• 5 Layer Performance Air Filter
• Premium Hardware
• 1-Piece Housing

This Part Fits:

This massive 18” tall 360-degree radial flow air filter features our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. This air filter is surrounded by expanded metal that provides additional protection, preventing filter collapse and direct impact. The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive Air Intake sound. The housing incorporates both the factory hood air inlet scoop and the grille inlet using no additional hardware. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Our XLPE material is heat soak resistant and extremely durable. The computer designed system utilizes factory mounting locations, minimizing the use of unnecessary hardware, and ensuring a perfect fit every time. Its innovative design makes for a hassle-free, direct bolt-on installation process that requires no cutting or drilling. Stainless-steel T-bolt clamps are included for strength, and a premium silicone coupling allows for ample flexibility and durability. Momentum GT intakes are designed with fewer parts for a fast and easy installation.

• Open Element Housing Incorporates Factory Hood Inlet Scoop and Grille Air Inlet for Maximum Cold Air
• Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
• Innovative Filter-to-Housing Interface for Easy Installation (Roughly 60 Minutes)
• Premium Stainless-Steel Clamps and Silicone Couplings Provide a Secure Seal
• Utilizes Factory Mounting Locations for an Easy and Secure Installation
• Washable and Reusable Pro 5R Air Filter for Maximum Performance

This Part Fits:

Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

• Repl. Factory Intake For Improved HP/Torque/Styling
• Rotomolded Plastic Tube For Maximum Air Flow
• Uses Pro 5R Filter For Maximum Air Flow
• Improved Throttle Response
• 2 Year Limited Warranty
• 35% cfm Flow Gain

This Part Fits:

Quantum Cold Air Intake Systems (Patent Pending) by aFe POWER are the latest in airflow technology for your Ford Power Stroke 6.7L (td) truck. From the uniquely integrated Filter-to-Housing design to the state of the art, lightweight injection molded base and top Pro 5R filter, Quantum delivers dyno-proven performance gains, convenience, value and installs in minutes.

• Filter Base Has Built-In 3-Angle Velocity Stack For Even Airflow
• CAD Designed XLPE Roto-Molded Intake Tube For Optium Airflow
• Unique Filter To Housing Interface For Easy Installation
• Quality Stainless Steel Clamps For A Secure Install
• Intake Tube Heat Soak Resistant and Durable
• Washable And Reusable Air Filter
• Silicone Bellows Coupling
• Outflows Factory Intake

This Part Fits:

This Momentum intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a massive (6.75" x 4.75") oval flange and is 8-1/2" tall. The system comes with both a Pro DRY S and Pro 5R performance air filter. The simple yet elegant design of the one-piece sealed housing makes installation a snap and features our (Patent Pending) filter-to-housing interface. A large clear sight window allows for filter inspection without removal of the airbox. The housing is made out of lightweight high gloss, clear-coated plain weave carbon fiber and mounts directly into the factory headlamp cold air inlet location on the driver side to capture the coolest air available from the factory intake tract. Momentum intakes are designed with fewer parts for a quick and simple installation.

• No Cutting Or Drilling On Factory Parts For Faster Installation
• Includes Both Pro DRY S Oil-Free And Pro 5R Oiled Filters
• Built In Sight Window Provides Easy Inspection Of Filter
• Clear-Coated Carbon Fiber Housing And Tube
• Incorporates Factory Headlamp Air Inlet
• +37 HP / +33 ft./lbs. Torque Max Gains
• Unique Air Filter To Housing Interface
• Outflows Factory Intake By 13%
• Washable And Reusable
• No Tuning Required

This Part Fits:

This 5-3/4” tall 360-degree radial flow air filter features a 5-1/2" flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. Its inverted top makes for more filter surface area, resulting in longer service intervals. aFe POWER developed this heat shield to snap onto the top of the lower half of the factory air box to provide a hassle-free installation utilizing factory mounting locations. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE (cross-linked polyethylene) material is heat soak resistant and extremely durable. The computer designed system utilizes factory mounting locations, minimizing the use of unnecessary hardware, and ensuring a perfect fit every time. This is a direct bolt-on kit that requires no cutting or drilling on factory parts. Stainless-steel clamps are included for strength, and premium silicone couplings allow for ample flexibility. This air intake system works perfectly in combination with aFe POWER D.A.S. (Dynamic Air Scoop): 52-10010S(Black), 52-10010SR(Red) and 52-10010SL(Blue).

• Powder-Coated One-Piece Heat Shield Mounts to Lower Half of Factory Airbox for Easy Installation
• Premium Stainless-Steel Clamps and a Silicone Coupling are used for Strength and Durability
• Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
• No Cutting or Drilling on OEM Parts for Faster Installation
• Computer-Designed Roto-Molded Intake Tube

This Part Fits:

A custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the airbox. The roto-molded housing is made out of black cross-linked polyethylene. A urethane plug is also included if you wish to completely seal the airbox. (US PAT 9440175) For Filter-to-Housing Interface. This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a large (7" x 4-3/4") oval flange and is 8" tall with an inverted top. The Pro DRY S performance air filter features 3-layers of progressive finer porosity synthetic media providing maximum convenience with 100% polyurethane frame for long life and multiple cleaning cycles. Premium stainless steel clamps and a silicone coupling are used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation.

• No Cutting Or Drilling On Factory Parts For Faster Installation
• Built-In Sight Window Provides Easy Inspection Of Filter
• High Quality 1-Piece Sealed Housing w/Aux. Air Inlet
• CAD Designed Roto-Molded Intake Tube
• 3 Layer Synthetic Oil-Free Media
• Outflows Factory Intake

This Part Fits:

Bringing you the next generation of intakes, the Momentum HD sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing with a built-in clear sight window to the massive 1,000cfm air filter and premium hardware, we spared no expense to give you the best intake on the market.

• 1000 cfm Performance 360 deg. Radial Flow Air Filter
• Unique Housing To Filter Interface-Patent Pending
• 10 Layer Progressive Cotton Gauze Oiled Media
• Huge 6 in. Flange w/Inverted Top Air Filter
• Auxiliary Air Scoop w/Urethane Plug
• Washable And Reusable Air Filter
• Stainless Steel T-Bolts Clamps
• Reinforced Silicone Coupler
• Built In Sight Window

This Part Fits:

Bringing you the next generation of intakes, the Momentum HD sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing with a built-in clear sight window to the massive 1,000cfm air filter and premium hardware, we spared no expense to give you the best intake on the market.

• 1000 cfm Performance 360 deg. Radial Flow Air Filter
• Wrapped In Reinforce Metal For Maximum Strength
• 10 Layer Progressive Cotton Gauze Oiled Media
• Unique Air Filter To Housing Interface
• Allows For Maximum Filter Size
• Increases Available Air Volume
• Easy Installation

This Part Fits:

The new 6.7L turbo diesel Cummins engine demands maximum airflow—and aFe POWER delivers. The Momentum Sealed Intake eliminates hidden restrictions to unleash your engine’s full potential. It delivers more engine protection, while precision-molded tubing provides smooth, efficient airflow straight to the turbocharger for peak performance. Pro 10R Air Filter uses ten layers of cotton gauze treated with oil. The sticky surface traps fine dust and debris while allowing plenty of air to pass through. Servicing is easy:  just wash, dry, re-oil and reinstall. A clear sight window lets you check filter condition at a glance, eliminating the need for disassembly during routine maintenance, while the sealed airbox features our innovative filter-to-housing interface for a secure, precise fit. The dyno-tuned intake tube is engineered to optimize airflow and maximize power and torque based on real-world testing. Made from heat-resistant and durable XLPE material, it guarantees a precise fit. Premium stainless-steel clamps are included for strength, while the silicone coupler allow for ample flexibility.

• Product covered by one or more of the following patents: 9440175, 10252202, 10532304, 11219850, 11331607, 11376536, 11135538, 11745129
• The sealed housing blocks engine heat, dirt, and contaminants out, delivering cooler, denser air for peak performance.
• The rotomolded housing with a clear sight window and tube deliver exceptional strength and rigidity.
• Pro 10R Air Filter Media: Oiled, washable, reusable, and built for performance.
• Premium stainless-steel clamps for a secure seal.
• Custom-made silicone coupler for durability.

This Part Fits:

The new 6.7L turbo diesel Cummins engine demands maximum airflow—and aFe POWER delivers. The Momentum Sealed Intake eliminates hidden restrictions to unleash your engine’s full potential. It delivers more engine protection, while precision-molded tubing provides smooth, efficient airflow straight to the turbocharger for peak performance. Pro Dry S Air Filter captures dirt without oil. It  uses three layers of dense synthetic fibers to trap particles. It makes cleaning and maintaining your filter convenient. A clear sight window lets you check filter condition at a glance, eliminating the need for disassembly during routine maintenance, while the sealed airbox features our innovative filter-to-housing interface for a secure, precise fit. The dyno-tuned intake tube is engineered to optimize airflow and maximize power and torque based on real-world testing. Made from heat-resistant and durable XLPE material, it guarantees a precise fit. Premium stainless-steel clamps are included for strength, while the silicone coupler allow for ample flexibility.

• Product covered by one or more of the following patents: 9440175, 10252202, 10532304, 11219850, 11331607, 11376536, 11135538, 11745129
• The sealed housing blocks engine heat, dirt, and contaminants out, delivering cooler, denser air for peak performance.
• The rotomolded housing with a clear sight window and tube deliver exceptional strength and rigidity.
• Pro DRY S Air Filter Media: Washable, reusable, and built for convenience.
• Premium stainless-steel clamps for a secure seal.
• Custom-made silicone coupler for durability.

This Part Fits: