Fits 2024-2026 Ford Mustang GT (5.0L).

The Corsa Performance S650 dual intake system is a high-performance upgrade designed specifically for the 5.0L Coyote engine. This system features dual matte carbon fiber intake ducts, engineered to match the factory engine cover while optimizing airflow to the dual throttle bodies. The industry-first clear polycarbonate lids allow for easy filter inspection and provide a unique engine bay aesthetic, secured by red anodized aluminum hardware featuring the iconic Corsa "C" logo.

This bolt-on system is dyno-proven to deliver gains of up to 17 HP at 7,125 RPM and 13 lb-ft of torque at 5,425 RPM without requiring an aftermarket tune. It utilizes two MaxFlow 5 oiled filters, providing 99% filtration efficiency and maximum airflow for superior engine protection and power delivery.

• Direct bolt-on installation; typically completed in under 30 minutes
• Dual matte carbon fiber intake ducts for heat resistance and weight reduction
• Clear polycarbonate lids with red anodized aluminum latching hardware
• Dual machined black anodized aluminum MAF mounting plates
• Includes two washable MaxFlow 5 oiled filters for maximum flow
• Dyno-proven +17 HP and +13 lb-ft torque gains over stock
• No ECU tuning required for operation
• Assembled in the USA and backed by a Limited Lifetime Warranty

Fits 2024-2026 Mazda CX-70 and CX-90 (L6-3.3L Turbo / Turbo S).

Optimize your Mazda's turbocharged inline-six with the Takeda Momentum sealed cold air intake. This system features a unique filter-to-housing interface that allows for a massive 7.5-inch tall, 360-degree radial flow air filter. The housing and intake tube are rotomolded from cross-linked polyethylene (XLPE), a heat-resistant material that shields the intake charge from engine bay heat soak while retaining the factory ram air inlet. A built-in clear sight window provides a quick way to inspect the filter condition without needing to disassemble the intake.

• Pro 5R Filter: Five layers of progressively finer pre-oiled cotton gauze media provide maximum airflow and performance for street or track.
• Momentum Design: A patent-pending interface reduces hardware and simplifies installation while maximizing filter surface area.
• Durable Construction: Includes premium stainless-steel clamps and a reinforced silicone coupler for a secure, long-lasting fit.
• Filter Specs: 7.5-inch height, 4.0-inch flange, inverted top for increased surface area.
• Maintenance: Pro 5R media is fully washable and reusable for extended service life.

Fits select 2015-2021 BMW M2 Competition, M3 Base, M4 Base, M4 CS, and M4 GTS. The Dinan carbon fiber cold air intake for the F8x chassis S55 engine is a high-efficiency sealed system designed to maximize airflow while isolating the intake charge from power-robbing engine bay heat. This system replaces the restrictive factory components with dual larger-volume carbon fiber airboxes and optimized intake tubes for a straighter, freer-flowing path to the turbos.

• 20% larger airbox volume than stock for increased plenum capacity
• 30% larger cylindrical air filters for optimum filtration and flow
• Lightweight, high-gloss carbon fiber intake tubes and housings
• Integrated larger MAF housing for improved sensor accuracy and flow
• Documented gains of +14 HP @ 6000 RPM and +21 LB-FT @ 3000 RPM when coupled with engine tuning
• Full bolt-on installation using factory mounting points
• Sealed design ensures only cold outside air reaches the intake
• Delivers a sportier, more audible engine and turbo induction sound

Fits select 2022-2026 Audi A3, S3 and Volkswagen Arteon, Golf R, and GTI (2.0T).

The APR Forged Carbon Intake System Cover allows you to transform your existing APR open-air intake into a sophisticated closed-box design. This component is engineered for enthusiasts seeking to balance a high-end engine bay aesthetic with functional performance. The cover features a premium forged carbon fiber construction, providing a distinct marble-like finish that stands out from traditional carbon weaves.

Installation is purely mechanical and requires no tools; the cover is designed to snap directly into place on the APR intake housing. To ensure the engine still breathes efficiently in high-output applications, the cover includes integrated airflow paths. these allow the system to pull the necessary volume while simultaneously increasing the audible presence of the turbocharger.

• Function: Converts APR open intake systems to a closed configuration
• Material: Lightweight, high-strength forged carbon fiber
• Installation: Precision snap-in fitment requires no tools or hardware
• Performance: Integrated paths for optimized airflow and enhanced induction sound
• Compatibility: Designed for use with APR intake systems CI100052, CI100053, and CI100077

Fits select 2019-2024 Cadillac Escalade/ESV, Chevrolet Silverado 1500, Suburban, Tahoe, and GMC Sierra 1500, Yukon/XL (6.2L V8).

The Volant Performance Powercore Closed Box Air Intake System is engineered to improve engine efficiency by replacing the restrictive factory airbox with a high-flow, heat-shielded design. This system features a smoked acrylic see-through lid for easy filter inspection and a rugged enclosure that protects the intake from engine bay heat and debris. At its core is the Donaldson PowerCore Ultra-Web air filter, which utilizes sub-micron fibers to achieve 99.96% filtration efficiency.

• Maintenance-free dry filtration technology lasts up to 150,000 miles depending on driving conditions
• Closed box design isolates the intake from ambient engine heat to maintain lower intake air temperatures (IAT)
• Smoked acrylic lid allows for visual filter checks without disassembly
• High-flow design increases air volume compared to the stock restrictive intake system
• Direct bolt-on installation typically completed in under one hour using standard hand tools
• Washable and reusable filter media designed for long-term engine protection

Fits 2016-2023 Toyota Tacoma (V6-3.5L).

The K&N NextGen 70-9039 cold air intake system is engineered to maximize engine performance by significantly reducing airflow restriction. This system replaces the factory air path with a mandrel-bent 6063 aluminum rigid tube, increasing airflow volume to the engine by up to 40%. The result is a dyno-tested increase of up to 17.4 horsepower and 17.8 lb-ft of torque with no ECU tuning required.

Protection is handled by a custom-designed NextGen air box, which isolates the intake air from high engine bay temperatures. At the heart of the system is K&N's washable, reusable High-Flow air filter. Featuring oiled cotton media, this oversized conical filter is designed to go up to 100,000 miles between cleanings under normal highway driving conditions. The entire kit is designed for a straightforward installation that can typically be completed in under 60 minutes.

• 6063 aluminum intake tube for increased airflow and durability
• Provides up to 40% more airflow than factory intake systems
• Dyno-proven gains of up to 17.4 HP and 17.8 lb-ft torque
• Oiled cotton filter media is washable and reusable for the life of the vehicle
• Custom NextGen air box shields intake from engine heat
• Bolt-on installation requires no permanent modifications or tuning
• Manufacturer Part Number: 70-9039
• Backed by K&N Lifetime Limited Warranty

Fits select 2009-2013 Chevrolet Silverado 1500 models (V8-4.8L / 5.3L / 6.2L).

The K&N NextGen Aluminum cold air intake system is engineered to replace the restrictive factory air path with a high-flow 6063 aluminum intake tube. This rigid tube increases airflow volume by up to 23%, delivering dyno-tested gains of up to 15.3 horsepower and 13.3 lb-ft of torque without requiring an ECU tune. The system features a custom-designed NextGen air box that isolates the filter from engine bay heat, ensuring a cooler, denser air charge reaching the throttle body.

Included is a K&N High-Flow LIFETIME Air Filter, constructed with oiled cotton media in an oversized conical design. This washable and reusable filter can go up to 100,000 miles between cleanings under highway driving conditions. Installation is straightforward, typically completed in under 60 minutes using basic hand tools.

• Increases airflow by up to 23% over stock equipment
• Estimated gains of 15.3 HP and 13.3 lb-ft of torque
• Rigid 6063 aluminum intake tube for durability and resonance
• Custom NextGen air box protects against high engine temperatures
• Washable, reusable oiled cotton air filter (LIFETIME series)
• Direct bolt-on installation with no tuning required
• Manufacturer Part Number: 70-3070
• Backed by a K&N Lifetime Limited Warranty

Fits select 2018-2026 Jeep Wrangler and 2020-2026 Jeep Gladiator (V6-3.6L).

Upgrade your Jeep's performance with the K&N NextGen Aluminum cold air intake system. This kit replaces the restrictive factory air path with a rigid, American-made 6063 aluminum intake tube designed to increase airflow volume by up to 47%. The result is a dyno-tested increase of up to 12.5 horsepower and 13.3 lb-ft of torque without requiring an aftermarket ECU tune.

The system features a custom-engineered NextGen air box that isolates the intake from high engine bay temperatures, ensuring a cooler, denser air charge. It is paired with a washable, reusable High-Flow LIFETIME Air Filter utilizing oiled cotton media. This oversized conical filter is built for longevity, capable of going up to 100,000 miles between services under standard highway driving conditions.

• 6063 aluminum intake tube for maximum durability and flow
• Up to 47% increase in airflow compared to factory systems
• Estimated gains of 12.5 HP and 13.3 lb-ft of torque
• Washable and reusable oiled cotton High-Flow Air Filter
• Custom air box helps maintain lower intake air temperatures
• Bolt-on installation typically completed in under 60 minutes
• Backed by a Lifetime Limited Warranty
• Manufacturer Part Number: 70-1576

Fits 2016-2022 Jeep Grand Cherokee and Grand Cherokee L (V6-3.6L).

The K&N NextGen Aluminum cold air intake system (70-1572) is engineered to replace the restrictive factory air path with a high-flow, mandrel-bent 6063 aluminum intake tube. This rigid design increases airflow volume by up to 27%, delivering dyno-proven gains of up to 13.8 horsepower and 26.4 lb-ft of torque with no ECU tuning required.

This system features a custom-designed NextGen air box that isolates the filter from high engine bay temperatures, ensuring cooler, denser air reaches the intake. It is paired with K&N's signature washable, reusable High-Flow LIFETIME Air Filter. Constructed with oiled cotton media, this oversized conical filter allows for service intervals up to 100,000 miles under standard highway driving conditions.

• Increases airflow up to 27% for improved throttle response
• Dyno-tested gains of 13.8 HP and 26.4 lb-ft of torque
• Mandrel-bent 6063 aluminum tube with custom heat-shield air box
• Washable, reusable oiled cotton High-Flow LIFETIME Air Filter
• Simple bolt-on installation in approximately 60 minutes
• Backed by a Lifetime Limited Warranty
• Manufacturer Part Number: 70-1572

Fits 2012-2018 Jeep Wrangler (V6-3.6L).

The K&N 70-1566 NextGen cold air intake system is engineered to replace the restrictive factory air path on your Jeep Wrangler V6 with a high-flow 6063 aluminum rigid tube. This American-made aluminum construction increases airflow volume to the engine by up to 37%, delivering dyno-proven gains of up to 17 HP and 28 lb-ft of torque without requiring an aftermarket tune. The system features a custom-designed NextGen air box that effectively shields the intake from high engine bay temperatures for cooler, denser air intake.

This performance system is paired with a washable, reusable High-Flow LIFETIME Air Filter. Utilizing oiled cotton media and an oversized conical design, the filter provides superior filtration and can go up to 100,000 miles between services under normal highway driving conditions. The entire kit is designed for a precise fit and can typically be installed in less than 60 minutes using standard tools.

• Constructed from high-grade 6063 aluminum for durability and heat resistance
• Increases airflow by up to 37% over stock equipment
• Dyno-proven gains of up to 17 horsepower and 28 lb-ft of torque
• Maintains emissions compliance on a factory engine tune
• Includes a washable, reusable oiled cotton lifetime air filter
• NextGen heat-shielding air box protects intake air quality
• Manufacturer Part Number: 70-1566

Fits 2011-2021 Jeep Grand Cherokee (V8-5.7L).

Optimize your Hemi's performance with the K&N NextGen Aluminum cold air intake system. This kit replaces the restrictive factory air path with a rigid 6063 aluminum intake tube, increasing airflow volume by up to 33%. Engineered to deliver power you can feel, this system provides gains of up to 18.5 horsepower and 31.8 lb-ft of torque without the need for an ECU tune.

To combat performance-robbing heat, the system includes a custom-designed NextGen air box that shields the intake from high engine bay temperatures. At the heart of the system is K&N’s legendary washable, reusable High-Flow air filter, featuring oiled cotton media and an oversized conical design that can go up to 100,000 miles between services under normal highway conditions.

• Direct-fit for 2011-2021 Jeep Grand Cherokee 5.7L V8
• Up to 18.5 HP and 31.8 lb-ft torque increase
• Rigid 6063 aluminum intake tube for maximum airflow volume
• Washable, reusable oiled cotton lifetime air filter
• Custom NextGen air box for heat protection
• Bolt-on installation typically completed in under 60 minutes
• Manufacturer Part Number: 70-1563
• Backed by a Lifetime Limited Warranty

Fits select 2007-2012 Dodge/Ram 2500 and 3500 diesel trucks (L6-6.7L).

The aFe Power Magnum FORCE Stage-2 Pro DRY S intake system is engineered to replace the restrictive factory housing with a high-velocity, high-volume setup. This system features a precision-molded rotomolded plastic intake tube that optimizes air speed while reducing intake noise. A 16-gauge powder-coated heat shield isolates the air filter from engine heat, while the included steel or brushed aluminum cover further directs cold air into the system for consistent performance.

• High Flow Performance: Provides an 81% CFM flow gain over the factory intake for improved horsepower, torque, and throttle response.
• Pro DRY S Filtration: Features a 360-degree, oil-free, 3-layer synthetic media filter for maximum convenience and easy maintenance.
• Rugged Construction: Built with a one-piece 16-gauge powder-coated heat shield and a durable rotomolded plastic intake tube.
• Simple Installation: Designed as a direct bolt-on replacement using factory mounting points with no cutting or drilling required.

• Manufacturer Part Number: 51-31342-1
• Flow Increase: 81% cfm
• Filter Type: Washable, Reusable Pro DRY S (Oil-Free)
• Warranty: 2-Year Limited Warranty

Fits select 2022-2026 Ram 1500, Jeep Wagoneer, and Grand Wagoneer (L6-3.0L).

Unleash the performance potential of your Hurricane-powered RAM 1500 or Jeep with the aFe Power Momentum GT Cold Air Intake. This system is precision-engineered to maximize airflow and throttle response by replacing the restrictive factory airbox with a high-efficiency induction system. Built with a smooth, one-piece cross-linked polyethylene (XLPE) housing, this intake resists heat soak and connects directly to the factory air inlet to pull in cool, dense outside air.

The system features a massive 8-inch tall 360-degree radial flow air filter using oil-free Pro DRY S media. This three-layer synthetic media provides excellent filtration efficiency and dust-holding capacity for street and light off-road use without the need for oils. A large, clear sight window built into the housing allows for quick filter inspections without disassembling the intake.

• Increased Airflow: Computer-designed, dyno-tuned intake tubes maximize power gains while ensuring a precise fit.
• Premium Filtration: Pro DRY S media features an inverted top for increased surface area and longer service intervals.
• Durable Construction: Heat-resistant XLPE housing and two-piece tube design withstand high engine bay temperatures.
• Simplified Installation: Features a silicone bellows coupler to accommodate engine movement and high-quality hardware for a secure seal.

• Manufacturer Part Number: 50-70120D
• Filter Type: Pro DRY S (Oil-Free Synthetic)
• Filter Dimensions: 8" Tall, 5.5" Flange
• Housing Material: Cross-linked Polyethylene (XLPE)
• Patents: 9440175, 10252202, 10532304, 11219850, 11331607, 11376536, 11135538, 11745129

Fits select 2020-2026 BMW X5 M, X5 M Competition, X5 M60i, X6 M, X6 M Competition, X6 M60i, X7 M60i, and XM Base.

The Dinan carbon fiber intake system for BMW's high-performance SUVs is engineered to overcome the airflow limitations of the factory configuration. Through extensive CFD analysis, Dinan developed a secondary air source deriving from a central hood scoop located behind the front grilles. This ambient air is channeled through carbon fiber runners that smooth and direct flow into enlarged air boxes, supplementing the factory inlet locations.

By increasing the internal volume and filter surface area, this system reduces restriction and improves throttle response. The center inlet scoop also serves as a carbon fiber engine cover, enhancing the under-hood aesthetic while providing a functional performance upgrade.

• Flow Performance: 630 CFM at 30" H2O per bank (10% increase over the factory 575 CFM)
• Air Box Volume: 56% larger than stock for increased capacity and sealing
• Filter Surface Area: 82 sq in per side (46% increase over stock 51 sq in)
• Inlet Area: 86% increase in cross-sectional area via the secondary center scoop
• Material: High-quality carbon fiber construction with integrated runners
• Installation: Direct bolt-on design for factory mounting points
• Manufacturer Part Number: D760-0056

Fits 2020-2025 Porsche 911 Carrera, Targa, Turbo, and Turbo S models (3.0T / 3.7T engines).

The APR Intake and Turbocharger Inlet System is a comprehensive induction upgrade designed to eliminate every major restriction in the factory 992-generation air path. Constructed from premium matte carbon fiber with integrated billet fittings, this system features smooth, organic transitions that optimize airflow within the tight confines of the rear-engine layout. By addressing flow bottlenecks at the air filters, airbox, and turbo inlets, this system flows 45% better than the base factory system, resulting in lower intake air temperatures and reduced pressure drop.

This kit is a direct plug-and-play replacement that includes high-performance washable pleated cotton gauze filters and significantly larger turbo inlets. These inlets provide a 9% larger cross-sectional area for 3.0T engines and a 23% increase for 3.7T engines. The design also features an integrated billet PCV fitting with a Nitrile umbrella check valve for maximum reliability and performance.

• Construction: Lightweight matte carbon fiber with integrated billet mounting points
• Flow Performance: 45% increase over factory with reduced pressure drop
• Airbox Outlet: 43% larger cross-sectional area than stock
• Turbo Inlets: Increased by 9% (3.0T) and 23% (3.7T) for better turbo efficiency
• Power Gains: Up to +22 WHP (3.0T Stage 1) or +29 AWHP (3.7T Stock ECU) recorded
• Hardware: Includes filters, airbox, turbo inlets, brackets, hoses, and check valve
• Maintenance: Washable and reusable pleated cotton gauze filters
• Manufacturer Part Number: CI100059

Fits select 2019-2026 Audi Q7, Q8, Bentley Bentayga, and Porsche Cayenne (3.0T).

The APR Carbon Fiber Intake System (CI100055) is a precision-engineered upgrade for the 3.0T EA839 V6 engine. This system replaces the restrictive factory multi-part plenum with an organically shaped, single-body carbon fiber intake designed to maximize cross-sectional area and minimize pressure drop. By streamlining the air path, this intake delivers up to 34% more airflow than the stock configuration, resulting in sharper throttle response and improved turbocharger efficiency.

At the heart of the system is a proprietary performance filter using high-flow cotton gauze media. Optimized on a flow bench to increase CFM by up to 12% over the factory unit, the filter is both washable and reusable. This design ensures your turbocharger works less to produce the same boost, while simultaneously enhancing engine and induction acoustics.

• Single-body carbon fiber plenum design for maximum internal volume and airflow
• System delivers up to 34% more flow than stock for improved performance
• Proprietary cotton gauze filter provides 12% more airflow while maintaining filtration standards
• Flow-bench optimized to reduce pressure drop and sharpen turbo response
• Washable and reusable filter media for long-term serviceability
• Direct replacement for the restrictive OE split-body turbocharger plenum
• Manufacturer Part Number: CI100055

Fits 2020-2021 Ford Powerstroke (6.7L).

The Sinister Diesel Cold Air Intake for the 2020-2021 Ford 6.7L Powerstroke is engineered to optimize engine performance by increasing airflow and reducing intake temperatures. By replacing the restrictive factory intake system, this kit allows your turbocharger to breathe more efficiently, improving throttle response and overall engine efficiency.

• Precision-engineered for a direct bolt-on installation
• Designed to deliver cooler, denser air to the engine
• Includes high-flow air filter and all necessary installation hardware
• Manufacturer Part Number: SD-CAI-6.7P-20

Fits select 2016-2019 Chevrolet Silverado 2500 HD/3500 HD and GMC Sierra 2500 HD/3500 HD.

The K&N 77-3090KTK Performance Intake Kit is designed to deliver a guaranteed increase in horsepower and torque by streamlining the engine's intake path. This system replaces the restrictive factory air filter and intake housing with a mandrel-bent aluminum intake tube and an oversized, conical High-Flow Air Filter. The oiled cotton filter media provides exceptional filtration while allowing for service intervals up to 100,000 miles under normal highway driving conditions.

Built for durability and performance, this kit includes a custom heat shield to help isolate the intake air from high engine bay temperatures. The entire system is engineered to bolt directly to factory mounting points, typically requiring less than 90 minutes for a complete installation.

• Mandrel-bent aluminum intake tube optimizes airflow velocity
• Washable, reusable oiled cotton High-Flow Air Filter media
• Custom heat shield protects intake air from engine heat
• Direct bolt-on installation using factory mounting points
• Manufacturer Part Number: 77-3090KTK
• K&N Million Mile Limited Warranty

Fits select 2018-2026 Jeep Wrangler, Gladiator, and Grand Cherokee (V6-3.6L).

The K&N Blackhawk Performance Air Intake System (71-1576) is designed to improve engine response and provide a more aggressive engine sound for V6-powered Jeep models. This system replaces the restrictive factory air filter and intake housing with a high-flow, black powder-coated aluminum tube and an oil-free DRYFLOW synthetic air filter. By smoothing and straightening the airflow, this intake allows your engine to breathe more efficiently than the stock assembly.

The included steel heat shield helps isolate the air filter from high engine bay temperatures, ensuring a cooler, denser air charge reaches the engine. The non-oiled synthetic filter media simplifies maintenance by providing exceptional protection without the need for oiling kits. Installation is a straightforward bolt-on process that can typically be completed in under 90 minutes using basic hand tools.

• Black powder-coated aluminum intake tube for durability and sleek aesthetics
• Oil-free DRYFLOW synthetic air filter provides high airflow and engine protection
• Steel heat shield helps protect intake air from engine heat
• Direct bolt-on installation replaces factory intake system
• K&N Million Mile Limited Warranty
• Manufacturer Part Number: 71-1576

Fits 2007-2008 Infiniti G35 Base, Journey, Sport, and X models.

The K&N 69-7082TS Typhoon dual air intake system replaces the restrictive factory air filters and intake housings in your Infiniti. Engineered for performance and durability, this short ram system utilizes dual mandrel-bent aluminum intake tubes finished in a silver powder coat to provide a smooth, low-restriction path for airflow. This system is paired with K&N High-Flow Air Filters featuring oiled cotton media, designed to improve filtration while increasing airflow to the engine.

• Oversized conical High-Flow Air Filters with washable, reusable oiled cotton media
• Mandrel-bent aluminum intake tubes for improved volumetric efficiency
• Custom heat shields help isolate intake air from high engine bay temperatures
• Simple bolt-on installation typically completed in 90 minutes or less
• Filter service intervals up to 100,000 miles under normal highway driving conditions
• K&N Million Mile Limited Warranty
• Manufacturer Part Number: 69-7082TS

Fits 2023-2026 Toyota GR Corolla (Circuit Edition, Core, Morizo Edition, Premium, and Premium Plus).

The aFe Takeda Momentum Cold Air Intake System (MPN: 56-70065DN) is engineered to optimize airflow and reduce intake temperatures for the Toyota GR Corolla. This system features a one-piece sealed housing crafted from durable, heat-resistant orange cross-linked polyethylene (XLPE) to protect the intake charge from engine bay heat. A clear sight window allows for effortless filter inspection without disassembly, while an integrated auxiliary air inlet provides the flexibility to draw additional air or remain sealed with the included plug.

This system utilizes a massive 9-inch tall, 360-degree radial flow air filter. The oil-free Pro DRY S media features three layers of synthetic material, providing high filtration efficiency and dust-holding capacity without the need for recharge oils. The filter's inverted top increases surface area, extending service intervals and maximizing flow through the 3.5-inch flange.

• Precision Engineering: Dyno-tuned XLPE intake tube replaces restrictive factory ducting for improved throttle response and power.
• Filter-to-Housing Interface: Patent-pending design reduces hardware for a simplified, secure installation.
• Pro DRY S Media: Washable and reusable 3-layer synthetic filter designed for street performance and convenience.
• High-Quality Hardware: Includes premium stainless-steel clamps, a durable silicone coupler, and black anodized aluminum studs for a factory-level fit and finish.
• Expandable System: Designed to work seamlessly with the optional Takeda Dynamic Air Scoop (DAS 56-70065S) to further increase cool air intake.

Fits 2020-2026 Nissan Frontier models (V6-3.8L), including PRO-4X, PRO-X, S, SL, and SV trims.

The aFe Power Momentum GT cold air intake system is engineered to maximize airflow and performance for the 3.8L Nissan Frontier. This system features a sealed, one-piece housing constructed from heat-resistant XLPE (cross-linked polyethylene) that isolates the intake air from engine heat. A large, clear sight window is integrated into the housing, allowing for quick filter inspections without disassembling the unit. The computer-designed, dyno-tuned intake tube ensures laminar airflow to the throttle body for improved throttle response and power gains.

Included is an 8-inch tall, 360-degree radial flow Pro DRY S air filter. This oil-free, synthetic media features three progressive layers of filtration, providing maximum convenience and high filtration efficiency for street and light off-road use. The patented filter-to-housing interface simplifies installation by reducing the number of components needed, while premium stainless-steel clamps and a silicone coupling provide a secure, leak-free connection to factory mounting points.

• Performance Gains: Dyno-proven gains of up to +4 HP and +9 lbs. x ft. TQ
• Airflow: Measured flow of 440 CFM @ 7" H2O, outflowing the factory intake by 52%
• Filter Media: Pro DRY S oil-free synthetic media (washable and reusable)
• Housing Material: Heat-soak resistant XLPE (Cross-linked Polyethylene)
• Hardware: Stainless-steel clamps and high-temp silicone coupling included
• Manufacturer Part Number: 50-70077D

Fits 2017-2018 Hyundai Elantra Sport (L4-1.6L).

The AEM 21-817C Performance Cold Air Intake System is engineered to reduce intake restriction by replacing the factory air box and filter with a high-flow, mandrel-bent aluminum intake tube. This system is designed to relocate the air filter lower and further forward to draw in cooler, denser air from outside the engine bay, optimizing the charge air entering the throttle body for improved combustion efficiency.

This intake utilizes an oversized AEM DryFlow synthetic air filter, featuring oil-free media that is both washable and reusable. The dry media allows for easier maintenance while providing exceptional filtration and protection against contaminants for up to 100,000 miles before cleaning is required. The system integrates seamlessly with your vehicle's factory PCV and vent hoses, utilizing existing spring clamps for a secure, factory-style fit.

• Mandrel-bent aluminum intake tube for smooth, laminar airflow
• Oil-free, synthetic DryFlow air filter media is washable and reusable
• Relocates filter for cooler air intake temperatures
• Direct bolt-on installation using factory mounting points
• Retains factory PCV and vent hose connections
• Up to 100,000 miles between filter cleanings (depending on driving conditions)
• Manufacturer Part Number: 21-817C
• Backed by AEM Lifetime Limited Warranty

Fits 2012-2014 Hyundai Genesis Sedan (3.8L).

Optimize your engine’s induction with the Injen SP Series short ram intake. Designed as a direct-fit performance upgrade, this system replaces the restrictive factory air box with a mandrel-bent 6061-T6 aluminum intake tube. Utilizing Injen’s patented MegaRam (MR) Technology and Air Fusion tuning, the SP1393P precisely manages airflow to maintain safe air/fuel ratios while delivering dyno-proven gains of up to 11 horsepower and 12 lb-ft of torque.

This kit features the SuperNano-Web dry air filter, which provides superior filtration efficiency and increased surface area without the need for filter oil. The result is a sharper throttle response and an aggressive, throaty engine note under load. Hand-crafted in Pomona, California, this intake is finished in a high-luster polished coating for a clean, professional look under the hood.

• Manufacturer Part Number: SP1393P
• Tubing Material: 6061-T6 Aluminum
• Filter Type: SuperNano-Web Dry Air Filter (Replacement: X-1026-BB)
• Performance Gains: Up to 11 hp and 12 lb-ft of torque
• Technology: Patented MR Technology and Air Fusion tuning
• Design: Short Ram (Sedan models only)
• Finish: Polished
• Optional Accessories: Hydroshield 1037BLK or 1037RED
• Warranty: Injen Technology Limited Lifetime Warranty
• Note: Not CARB exempt; not for sale or use in California.

Fits select 2011-2015 BMW 135i, 135is, 335i, 335i xDrive, and X1 xDrive35i (I6-3.0L N55).

Optimize the performance of your N55 engine with the aFe Power Momentum GT Pro DRY S cold air intake system. Engineered to outflow the factory intake by 16%, this system utilizes a smooth, CAD-designed roto-molded intake tube and a high-quality one-piece housing to maximize air velocity and reduce heat soak. The black cross-linked polyethylene (XLPE) housing features a built-in sight window for easy filter inspection and includes a urethane plug for those who prefer a fully sealed air box configuration.

This system centers around a massive 9-inch tall cylindrical Pro DRY S air filter. The oil-free, 3-layer synthetic media provides exceptional filtration and convenience, requiring no re-oiling after cleaning. For a secure and durable fit, the kit includes premium stainless steel clamps and a high-temp silicone coupling. Installation is a direct bolt-on process that requires no cutting or drilling of factory components.

• Manufacturer Part Number: 51-76313
• Outflows factory intake by 16%
• Pro DRY S oil-free 3-layer synthetic media for maximum convenience
• One-piece heat-resistant XLPE roto-molded housing
• Large 9-inch tall filter with 6-3/4" x 4-3/4" flange
• Built-in sight window for quick filter status checks
• Stainless steel hardware and silicone couplings included

Fits 2004-2006 Chevrolet Silverado and GMC Sierra 2500 HD/3500 models (V8-6.6L LLY).

The aFe Power Momentum HD Stage-2 Si intake system is engineered using advanced design tools to provide the optimal balance of power and engine protection for your Duramax diesel. This sealed air intake features a unique, one-piece housing that simplifies installation by eliminating multiple components. The system is anchored by a massive Pro DRY S air filter, utilizing three layers of oil-free synthetic media for maximum convenience and airflow efficiency.

• Sealed Housing: One-piece heat-resistant housing features a patent-pending filter-to-housing interface and an auxiliary air scoop with a urethane plug for adjustable airflow.
• Advanced Filtration: Includes a massive 6-inch flange air filter with an inverted top, utilizing washable and reusable Pro DRY S 3-layer synthetic media.
• Robust Construction: Equipped with a reinforced silicone coupler and stainless steel T-bolt clamps for a secure, durable seal under heavy load.
• Integrated Style: Features a branded stainless steel plate for a professional, aggressive under-hood appearance.
• Manufacturer Part Number: 51-74002

Fits 2011-2023 Dodge Challenger R/T, R/T Classic, R/T Plus, R/T Plus Shaker, R/T Shaker, and T/A models (V8-5.7L).

The aFe Power Momentum GT Cold Air Intake System is engineered to optimize performance for the 5.7L HEMI engine by maximizing airflow and reducing intake temperatures. This system features a unique, one-piece sealed housing crafted from heat-resistant cross-linked polyethylene (XLPE), which isolates the air filter from warm engine bay air. The housing is designed to maintain compatibility with factory Shaker hood air inlets and the 2015+ headlight air inlet for maximum versatility.

• Pro 5R Filter Media: Includes a 10-inch tall, 360-degree radial flow air filter featuring a 6 x 4-inch oval flange and five layers of progressively finer oiled cotton gauze for maximum performance and airflow.
• Integrated Sight Window: A large, clear sight window allows for effortless filter inspection without needing to disassemble the housing.
• High-Flow Intake Tube: The computer-designed, dyno-tuned intake tube is made from durable XLPE to ensure optimal volumetric flow and heat resistance.
• Direct Bolt-On Installation: Uses minimal hardware and a patent-pending filter-to-housing interface for a quick setup. Includes premium silicone couplers and stainless-steel clamps for a secure, long-lasting fit.
• Expandable Induction: On 2015-2023 models, the auxiliary air inlet can be connected to the headlight air inlet using an optional Dynamic Air Scoop (sold separately).

Manufacturer Part Number: 50-70126R

Fits 2024-2025 Ford Mustang GT (5.0L V8).

The Corsa Performance S650 Ford Mustang GT Carbon Fiber Cold Air Intake is engineered for maximum airflow and thermal management. This dual-intake system features matte carbon fiber ducts designed to flawlessly match the factory 5.0L engine cover for a seamless under-hood aesthetic. High-strength clear polycarbonate lids with red anodized aluminum latching hardware provide a window into the dual filter setup while maintaining a secure, airtight seal.

Equipped with DryTech dry synthetic air filters, this system delivers 99% filtration efficiency without the need for oiling, simplifying maintenance. On the dyno, this intake produces gains of up to 17 HP at 7,125 RPM and 13 lb-ft of torque at 4,525 RPM. The bolt-on design utilizes machined black anodized MAF mounting plates and requires no aftermarket tuning for operation.

• Matte finish carbon fiber ducts for OEM-style integration
• Clear polycarbonate lids with iconic Corsa logo latching hardware
• Includes two high-flow DryTech washable, oil-free synthetic filters
• Dyno-proven gains of up to 17 HP and 13 lb-ft of torque
• Dual machined black anodized aluminum MAF mounting plates
• Simple bolt-on installation in under 30 minutes
• No ECU tuning required for installation
• Designed, engineered, and assembled in the USA
• Manufacturer Part Number: 44013DMT
• Backed by Corsa's Limited Lifetime Warranty

Fits 2016-2021 Honda Civic EX, LX, LX-P, Sport, and Type R (2.0L).

The aFe Takeda Stage-2 Cold Air Intake System is engineered to optimize airflow and increase performance for your Civic. This system features a computer-designed, dyno-tuned intake tube crafted from heat-resistant XLPE (cross-linked polyethylene) to ensure maximum power gains and a precise fit. The one-piece housing is also molded from durable XLPE, creating a heat-blocking seal against the hood while utilizing an open-element design for easy filter inspection. By drawing air through a larger, upgraded inlet that interfaces with the factory scoop, this intake significantly reduces restriction compared to the stock assembly.

At the heart of this system is the Pro 5R performance air filter. This 360-degree radial flow filter utilizes five layers of progressively finer cotton gauze media to provide maximum airflow and filtration. Its inverted top design increases total surface area, allowing for longer service intervals even under demanding conditions.

• Outflows factory intake by 16%
• Measured Flow: 255 CFM @ 7 in. H2O
• Dyno-proven gains of up to +5 HP and +6 lb-ft torque
• Five-layer pre-oiled Pro 5R cotton gauze media for maximum performance
• Heat-resistant XLPE housing and intake tube
• Direct-fit installation using factory mounting points; no cutting required
• Manufacturer Part Number: 56-10007R

Fits select 2005-2011 Chrysler 300, Dodge Challenger, Charger, and Magnum (V8-5.7L / 6.1L).

The aFe Power MagnumFORCE Stage-2 Cold Air Intake System replaces the restrictive factory air box to optimize airflow and engine performance. This system features a precision-engineered, rotomolded plastic intake tube designed to maximize air volume and velocity, delivering a 66% CFM flow gain over the stock intake for improved throttle response and power.

Protection against engine heat is provided by a 16-gauge powder-coated steel heat shield that requires no cutting or drilling for installation. The system is equipped with a high-performance Pro 5R air filter, providing 360-degree airflow and superior filtration efficiency.

• Pro 5R Filter: 5-layer progressively finer cotton gauze oiled media for maximum airflow and performance; washable and reusable.
• Rotomolded Tube: High-quality plastic construction resists heat soak and streamlines airflow.
• Heavy-Duty Heat Shield: One-piece 16-gauge powder-coated shield blocks radiant engine heat.
• Direct Fit: Bolts to factory mounting locations for a straightforward installation.
• Specifications: 66% CFM flow gain; manufacturer part number 54-10712.
• Warranty: Includes a 2-year limited warranty.