Skunk2's Fine Tuning products and accessories, like its Silicone Radiator Hoses for the '02-'06 RSX, help put the finishing touches onto your vehicle you work so hard to make perform well. Liven up your engine bay and give yourself some peace of mind while you're at it with one of Skunk2's Silicone Radiator Hose Kits. Unlike OEM rubber cooling hoses that must be periodically replaced because of deterioration caused by heat and pressure, Skunk2 silicone hoses will outlast the life of your engine. And with their glossy black finish, red interior, and Skunk2 logo, they'll look good while doing it. Skunk2 Silicone Radiator Hoses are handmade using high-quality, automotive-grade silicone and feature cutting-edge, multi-layer, embedded fiber linings that'll resist even the most abusive engine temperatures and pressures. Each application has been test-fitted for accuracy, as well as for an OEM fit, and has been subjected to rigorous tests and inspections to ensure years of worry-free operation. All Skunk2 radiator hoses are compatible with each vehicles OEM water housings, radiator necks, and OEM hose clamps. Youre going to have to replace those OEM radiator hoses sooner or later. Do your engine bay a favor and upgrade it with a Skunk2 Silicone Radiator Hose Kit.

• For Use w/Skunk2 Radiator Cap
• Silicone

This Part Fits:

Skunk2's Fine Tuning products and accessories, like its Silicone Radiator Hoses for the '02-'05 Civic Si, help put the finishing touches onto your vehicle you work so hard to make perform well. Liven up your engine bay and give yourself some peace of mind while you're at it with one of Skunk2's Silicone Radiator Hose Kits. Unlike OEM rubber cooling hoses that must be periodically replaced because of deterioration caused by heat and pressure, Skunk2 silicone hoses will outlast the life of your engine. And with their glossy black finish, red interior, and Skunk2 logo, they'll look good while doing it. Skunk2 Silicone Radiator Hoses are handmade using high-quality, automotive-grade silicone and feature cutting-edge, multi-layer, embedded fiber linings that'll resist even the most abusive engine temperatures and pressures. Each application has been test-fitted for accuracy, as well as for an OEM fit, and has been subjected to rigorous tests and inspections to ensure years of worry-free operation. All Skunk2 radiator hoses are compatible with each vehicles OEM water housings, radiator necks, and OEM hose clamps. Youre going to have to replace those OEM radiator hoses sooner or later. Do your engine bay a favor and upgrade it with a Skunk2 Silicone Radiator Hose Kit.

• For Use w/Skunk2 Radiator Cap
• Silicone

This Part Fits:

Skunk2 Silicone Radiator Hoses are handmade using high-quality, automotive-grade silicone and feature cutting-edge, multi-layer, embedded fiber linings that'll resist even the most abusive engine temperatures and pressures. Each application has been test-fitted for accuracy, as well as for an OEM fit, and has been subjected to rigorous tests and inspections to ensure years of worry-free operation. All Skunk2 radiator hoses are compatible with each vehicle's OEM water housings, radiator necks, and OEM hose clamps. You're going to have to replace those OEM radiator hoses sooner or later. Do your engine bay a favor and upgrade it with a Skunk2 Silicone Radiator Hose Kit.

• Handmade Automotive Grade Silicone
• Multi Layer Embedded Fiber Linings
• Max Temperature 446F (230C)
• Inner Diameter 1.25 in.
• Outer Diameter 1.65 in.

This Part Fits:

Skunk2's Fine Tuning products and accessories, like its Silicone Radiator Hoses for the '06-'11 Civic Si, help put the finishing touches onto your vehicle you work so hard to make perform well. Liven up your engine bay and give yourself some peace of mind while you're at it with one of Skunk2's Silicone Radiator Hose Kits. Unlike OEM rubber cooling hoses that must be periodically replaced because of deterioration caused by heat and pressure, Skunk2 silicone hoses will outlast the life of your engine. And with their glossy black finish, red interior, and Skunk2 logo, they'll look good while doing it. Skunk2 Silicone Radiator Hoses are handmade using high-quality, automotive-grade silicone and feature cutting-edge, multi-layer, embedded fiber linings that'll resist even the most abusive engine temperatures and pressures. Each application has been test-fitted for accuracy, as well as for an OEM fit, and has been subjected to rigorous tests and inspections to ensure years of worry-free operation. All Skunk2 radiator hoses are compatible with each vehicles OEM water housings, radiator necks, and OEM hose clamps. Youre going to have to replace those OEM radiator hoses sooner or later. Do your engine bay a favor and upgrade it with a Skunk2 Silicone Radiator Hose Kit.

• For Use w/Skunk2 Radiator Cap
• Silicone

This Part Fits:

Skunk2's Fine Tuning products and accessories, like its Silicone Radiator Hoses for the '00-'09 S2000, help put the finishing touches onto your vehicle you work so hard to make perform well. Liven up your engine bay and give yourself some peace of mind while you're at it with one of Skunk2's Silicone Radiator Hose Kits. Unlike OEM rubber cooling hoses that must be periodically replaced because of deterioration caused by heat and pressure, Skunk2 silicone hoses will outlast the life of your engine. And with their glossy black finish, red interior, and Skunk2 logo, they'll look good while doing it. Skunk2 Silicone Radiator Hoses are handmade using high-quality, automotive-grade silicone and feature cutting-edge, multi-layer, embedded fiber linings that'll resist even the most abusive engine temperatures and pressures. Each application has been test-fitted for accuracy, as well as for an OEM fit, and has been subjected to rigorous tests and inspections to ensure years of worry-free operation. All Skunk2 radiator hoses are compatible with each vehicles OEM water housings, radiator necks, and OEM hose clamps. Youre going to have to replace those OEM radiator hoses sooner or later. Do your engine bay a favor and upgrade it with a Skunk2 Silicone Radiator Hose Kit.

• For Use w/Skunk2 Radiator Cap
• Silicone

This Part Fits:

Skunk2's Fine Tuning products and accessories, like its high-pressure Radiator Caps, help put the finishing touches onto your vehicle you work so hard to make perform well. Skunk2 Radiator Caps increase internal radiator pressure, which results in a higher coolant boiling point and a more efficient cooling system. Skunk2 Radiator Caps feature an open valve pressure of 1.3 kg/cm—thats .2kg/cm higher than most OEM radiator caps. High-pressure radiator caps like Skunk2's demonstrate their effectiveness under high-load conditions on both race cars and street cars alike. Skunk2's high-pressure Radiator Cap Type A fits 88-91 Civics, 90-93 Integras, 92-01 Preludes, and most Mazdas, Mitsubishis, Nissans, and Subarus, as well as most aftermarket radiators.

• Increases Your Radiator Pressure And Cooling System Boiling Point
• For Use w/Skunk2 Silicone Radiator Hoses
• Perfect For Most Aftermarket Radiators

This Part Fits:

Skunk2's Fine Tuning products and accessories, like its high-pressure Radiator Caps, help put the finishing touches onto your vehicle you work so hard to make perform well. Skunk2 Radiator Caps increase internal radiator pressure, which results in a higher coolant boiling point and a more efficient cooling system. Skunk2 Radiator Caps feature an open valve pressure of 1.3 kg/cm—thats .2kg/cm higher than most OEM radiator caps. High-pressure radiator caps like Skunk2's demonstrate their effectiveness under high-load conditions on both race cars and street cars alike. Skunk2's high-pressure Radiator Cap Type B fits most Hondas and Acuras (excludes 88-91 Civics, 90-93 Integras, and 92-01 Preludes) as well as most Scions and Toyotas.

• Increases Your Radiator Pressure And Cooling System Boiling Point
• For Use w/Skunk2 Silicone Radiator Hoses
• Type B

This Part Fits:

Skunk2's all-aluminum, full-size Alpha Series Radiator for the BRZ/FRS is a direct-fit upgrade designed to dramatically increase both cooling efficiency and engine performance. Alpha Series Radiators are manufactured from lightweight and durable aluminum, feature 100-percent brazed cores, and include polished end tanks with Skunk2's signature Alpha logo embossed along each side. Each Alpha Series Radiator features a dual-core design, high-efficiency fins for maximum cooling capabilities. Each Alpha Series Radiator also includes provisions for the OEM cooling fan and OEM-compatible, 1.5- in. inlets and outlets. Skunk2's commitment to producing high-quality components means that each Alpha Series Radiator meets or exceeds original equipment manufacturer standards, that each radiator may be installed without modification to the vehicle, and is compatible with OEM hoses, cooling fans, and shrouds. (Note: Some engine swap applications may require custom radiator hoses and/or cooling fans.) Skunk2's Alpha Series Radiators are the perfect addition to any high-performance vehicle and are designed for the street, the track, or even OEM replacement purposes. Alpha Series Radiators are built to withstand harsh elements as well as against years of under-hood heat cycling. Each Alpha Series Radiator adheres to strict quality control standards and careful packaging, resulting in tubes and fins capable of optimal flow and efficient heat transfer.

• Features 1.50 in. Inlet And Outlet
• Dual-Core Design

This Part Fits:

This Part Fits:

It's common knowledge that the oil cooler on the 6.0L PowerStroke is prone to failure which could leave you with costly repairs, so Sinister Diesel offers the Ford 6.0 Oil Cooler kit to make sure your truck stays running right. Better yet, this oil cooler kit is always in stock, so orders placed before 3:00 p.m. PT will ship the same business day!, This oil cooler meets or exceeds OEM standards with a flow rate that is better than the PowerStroke's original oil cooler, which reduces the chance of clogging or cooler failure to extend the service life of your truck. Designed as a direct OEM replacement, the Ford 6.0 Oil Cooler kit offers quick and easy installation, and this kit comes with all the components you'll need to ensure proper oil cooler flow including an aluminum oil cooler, filter, gaskets and O-rings., The Ford 6.0 Oil Cooler kit is designed for the 2003 to 2007 Ford F-250 and F-350 Super Duty trucks and 2003.5 to 2005 Ford Excursion SUV with the 6.0L PowerStroke, and it is backed by Sinister Diesel's two-year warranty., We keep the Sinister Diesel 6.0 Powerstroke Oil Cooler in stock at all times to ensure fast shipping. All express orders received before 3:00 PM Pacific (6:00 PM Eastern) ship same business day. For any questions about your application or finding the right parts, call one of our knowledgeable diesel experts at 877-692-4110., Kit Includes:(1) Aluminum Oil Cooler, Complete Gasket, O-Ring kit.

• Meets or Exceeds OEM standards, Precision manufacturing for a drop in replacement, Better rate of flow than original OEM oil cooler, 2 Year Warranty

This Part Fits: