Fits 2007-2010 Chevrolet Silverado and GMC Sierra 2500 HD and 3500 HD models equipped with the 6.6L Duramax LMM engine.

The MBRP ARMOR LITE Series (formerly P Series) filter-back exhaust system is designed for truck owners seeking maximum flow and a deeper tone without the premium price tag of stainless steel. Built from heavy-gauge aluminized steel, this system is engineered to withstand road debris and harsh conditions in dry climates while significantly reducing the restrictions found in the factory exhaust piping.

To ensure optimal performance, every pipe is mandrel-bent to maintain a constant diameter throughout, eliminating the rippling and neck-down restrictions common in crush-bent tubing. This design minimizes back pressure, helping to lower exhaust gas temperatures (EGTs) and improve throttle response. The system is a direct bolt-on upgrade, utilizing the vehicle's factory mounting points for an easy installation with common hand tools.

• Series: ARMOR LITE (P Series)
• System Type: Filter-Back
• Material: Heavy-gauge Aluminized Steel
• Tubing Construction: Mandrel-bent
• Sound Profile: Rich, mellow exhaust note
• Installation: Bolt-on using factory hangers
• Compatibility: 2007-2010 GM 2500/3500 HD (LMM Duramax)
• Manufacturer Part Number: S6034P

Fits 2007-2010 Chevrolet Silverado and GMC Sierra 2500 HD / 3500 HD models equipped with the 6.6L Duramax LMM diesel engine.

The MBRP Armor Lite Series filter-back exhaust system is engineered for truck owners looking for improved exhaust flow and a performance sound without the premium price of stainless steel. Constructed from heavy-gauge aluminized steel, this system provides a cost-effective solution for vehicles operating in dry climates or for those prioritizing value. The mandrel-bent tubing ensures consistent diameters through every bend, eliminating the rippling and restrictions found in traditional press-bent pipes.

By reducing backpressure, this system helps lower exhaust gas temperatures (EGTs) and supports gains in horsepower and torque. The bolt-on design is specifically tuned for the LMM Duramax, utilizing your vehicle’s factory hanger locations for a straightforward installation that requires no specialized tools.

• Series: Armor Lite
• Type: Filter-Back
• Configuration: Single Side Exit
• Material: Heavy-gauge Aluminized Steel
• Tubing: Mandrel-bent for maximum flow
• Installation: Bolt-on design using OEM hangers
• Warranty: 3-Year Manufacturer Warranty

Fits select 2023-2026 Chevrolet Silverado 1500 and GMC Sierra 1500 models (L6-3.0L LZ0).

The aFe Vulcan Series DPF-back exhaust system is engineered to provide a custom sport truck aesthetic and a refined exhaust note for the 3.0L Duramax LZ0 engine. This system is constructed from 3-inch mandrel-bent 304 stainless steel tubing for maximum corrosion resistance and durability. It features quad 4-inch black 304 stainless steel exhaust tips that replace the factory setup for a more aggressive profile. For structural integrity, the entire system is 100% MIG-welded and utilizes factory-style hangers that mount directly to the original equipment locations. Please note that some cutting of the factory exhaust may be required; consult the installation instructions for details.

• Manufacturer Part Number: 49-34146-B
• 3-inch mandrel-bent 304 stainless steel tubing
• Quad 4-inch black 304 stainless steel exhaust tips
• 100% MIG-welded for race-proven strength
• Uses factory-style hangers for a secure, direct fit
• CAD designed for precise vehicle-specific fitment

Fits select 2020-2026 Chevrolet Silverado and GMC Sierra 2500 HD/3500 HD models equipped with the V8-6.6L turbo-diesel engine.

Engineered for maximum durability and exhaust velocity, this aFe Power Large Bore-HD DPF-back exhaust system is constructed from 4-inch mandrel-bent 409 stainless steel tubing. The system features a mitered merge collector designed to reduce turbulence and increase exhaust scavenging, directly improving throttle response and overall performance. The assembly is 100% MIG-welded for high-tolerance, race-proven strength that handles the heat and vibration of heavy-duty diesel applications.

The system is finished with dual 5-inch diameter black 304 stainless steel intercooled clamp-on tips, providing a custom aesthetic while managing heat exit. Installation is straightforward, utilizing factory-style hangers and mounting points for a secure, hassle-free fit. Please note that some cutting may be required depending on the specific wheelbase configuration.

• Fits Wheelbases: 149.4" (Double Cab/Short), 158.9" (Crew Cab/Short), 162.4" (Double Cab/Long), and 172" (Crew Cab/Long)
• Construction: 4" Mandrel-bent 409 stainless steel tubing
• Tips: Dual 5" black 304 stainless steel intercooled clamp-on tips with riveted logo plates
• Assembly: 100% MIG-welded for maximum durability
• Installation: Reuses factory mounting locations and hangers
• Manufacturer Part Number: 49-44126-B

Fits 2008-2026 Ford F-250 and F-350 Super Duty (4.6L / 6.4L / 6.7L).

The MagnaFlow Black Series Filter-Back Performance Exhaust System 17068 delivers a deep, resonating exhaust note and dyno-proven performance for your Ford Super Duty. This system is engineered to provide a moderate exterior sound and mild interior presence, making it ideal for daily driving and towing. The 4-inch mandrel-bent main piping ensures maximum flow, exiting in a dual same-side configuration behind the passenger rear tire for a clean, aggressive look.

Constructed from durable 409 stainless steel with a high-temperature satin black coating, this kit is built to withstand harsh environments. The system is finished with dual 5-inch intercooled, single-wall, angle-cut rolled edge tips made from 300-series stainless steel. Utilizing CNC precision robotic manufacturing, this direct-fit system replaces the factory exhaust from the diesel particulate filter back using existing mounting points for a straightforward installation.

• Main Piping Diameter: 4in.
• Tip Diameter: 5in.
• Tip Finish: Black Coated Intercooled
• Exit Style: Dual Same Side Behind Passenger Rear Tire
• Material: 409 Stainless Steel (System) / 300 Series Stainless Steel (Tips)
• Installation: Direct-Fit
• Manufacturer Part Number: 17068
• Warranty: Limited Lifetime Construction; 1-Year Finish

Fits 2010-2025 Mercedes-Benz Sprinter 2500 and 3500 (V6-3.0L).

The aFe Power Vulcan Series DPF-back exhaust system is engineered for durability and performance, whether your Sprinter is a commercial workhorse or a dedicated overland camper. This system is constructed from 3-inch mandrel-bent 304 stainless steel tubing for maximum flow and superior corrosion resistance. It features a versatile tailpipe design that gives you the option for either a side or rear exit to effectively evacuate NOx and exhaust gases from beneath the vehicle. The system is finished with a 4-inch diameter polished 304 stainless steel clamp-on tip featuring a laser-etched aFe POWER logo.

Designed for a hassle-free installation, this system utilizes a heavy-duty factory-style hanger for a secure fit and bolts directly to factory mounting points with no cutting or modifications required. Every joint is 100% MIG-welded to ensure race-proven strength and longevity in demanding environments.

• 3-inch mandrel-bent 304 stainless steel tubing
• 4-inch polished 304 stainless steel clamp-on exhaust tip
• Laser-etched aFe POWER logo for a custom look
• Dual exit options: side or rear tailpipe configuration
• 100% MIG-welded for maximum structural integrity
• Direct bolt-on installation using factory mounting points
• Manufacturer Part Number: 49-36504-P

Fits select 2020-2026 Chevrolet Silverado and GMC Sierra 2500 HD/3500 HD trucks (V8-6.6L).

The aFe POWER Large Bore-HD DPF-back exhaust system is engineered to improve exhaust flow and durability for heavy-duty GM diesel trucks. Constructed from 4-inch mandrel-bent 409 stainless steel tubing, this system minimizes restriction and is 100% MIG-welded for race-proven strength. A mitered merge collector is utilized to reduce turbulence and increase exhaust velocity, supporting better throttle response and performance. The system is finished with dual 5-inch diameter polished 304 stainless steel intercooled clamp-on tips, featuring a riveted aFe POWER logo plate.

This exhaust system is CAD-designed for high-tolerance fitment and utilizes factory-style hangers to mount directly to OEM locations. While designed for a straightforward installation with all necessary hardware included, please note that some cutting may be required depending on the specific configuration. This part (MPN: 49-44126-P) is compatible with multiple wheelbase configurations, including Double Cab and Crew Cab models with both short and long beds.

• Fits Wheelbases: 149.4", 158.9", 162.4", and 172"
• 4" Mandrel-bent 409 stainless steel tubing for maximum durability
• Dual 5" diameter polished 304 stainless steel intercooled clamp-on tips
• Mitered merge collector decreases turbulence and improves velocity
• 100% MIG-welded for long-term structural integrity
• Includes all necessary installation hardware
• Manufacturer Part Number: 49-44126-P

Fits select 2019-2025 Ram 2500 and 3500 trucks (L6-6.7L).

Enhance your Ram's exhaust flow and styling with the aFe POWER LARGE BORE HD DPF-back exhaust system. This system is engineered from 5-inch mandrel-bent 409 stainless steel tubing for maximum durability and corrosion resistance. By replacing the restrictive factory tailpipe, this kit improves exhaust scavenging and adds a more aggressive look without compromising the vehicle's emissions equipment.

This system features a massive 7-inch diameter clamp-on polished stainless steel exhaust tip for a bold finish. Built to withstand demanding conditions, the system is 100% MIG-welded for superior strength. Installation is straightforward, utilizing factory-style hangers and including all necessary hardware for a secure, bolt-on fitment with no cutting required on most configurations.

• Manufacturer Part Number: 49-42078-P
• Construction: 5-inch mandrel-bent 409 stainless steel tubing
• Tip Details: 7-inch diameter polished stainless steel clamp-on tip
• Mounting: Utilizes factory-style hangers and mounting points
• Assembly: 100% MIG-welded for longevity
• Included: All necessary hardware for a complete installation

Fits 2010-2025 Mercedes-Benz Sprinter 2500 and 3500 Base models equipped with the V6-3.0L engine.

The aFe Vulcan Series DPF-back exhaust system is engineered for maximum durability and improved exhaust flow on your Sprinter van. This system is constructed from 3-inch mandrel-bent 304 stainless steel tubing, providing superior corrosion resistance and longevity compared to aluminized or 409SS alternatives. Every joint is 100% MIG-welded for race-proven strength, ensuring the system can handle the rigors of heavy-duty use and off-grid camping excursions.

This kit includes a 4-inch diameter black-finished 304 stainless steel clamp-on tip featuring a laser-etched aFe POWER logo for a clean, custom look. Designed for versatility, the system offers the option for either a side exit or rear exit tailpipe configuration, allowing you to choose the best orientation to evacuate gasses and NOx from under the vehicle. Installation is a straightforward, hassle-free process utilizing factory-style hangers for a direct bolt-on fit that requires no cutting or modifications.

• Tubing: 3-inch mandrel-bent 304 stainless steel
• Tip: 4-inch diameter black 304 stainless steel clamp-on
• Construction: 100% MIG-welded for maximum strength
• Fitment Type: Direct bolt-on; no cutting required
• Exit Style: Side or rear exit options included
• Manufacturer Part Number: 49-36504-B

Fits select 2019-2025 Ram 2500 and 3500 models (L6-6.7L) with Crew Cab, Long Bed (8' Box), and a 169" wheelbase.

The aFe POWER ATLAS DPF-back exhaust system is engineered to improve exhaust flow and durability on your heavy-duty Ram. This system is constructed from 5-inch mandrel-bent aluminized steel tubing, providing a significant increase in volume over the restrictive factory piping. For a professional finish, the system includes a massive 7-inch diameter black stainless steel clamp-on tip featuring a riveted aFe POWER logo plate.

Designed for a hassle-free installation, the ATLAS system utilizes factory-style hangers and state-of-the-art computer-aided design to ensure a high-tolerance, direct bolt-on fit. No cutting or permanent vehicle modifications are required. Every joint is 100% MIG-welded in Corona, California, for race-proven strength and longevity.

• Manufacturer Part Number: 49-02075-B
• 5-inch mandrel-bent aluminized steel construction for maximum durability
• 7-inch diameter black stainless steel clamp-on exhaust tip
• 100% MIG-welded for race-proven strength
• Direct bolt-on installation using factory-style hangers
• Specific fitment for 169" wheelbase (Crew Cab/8' Bed) models
• Emissions-compliant design (no CARB EO# required)
• All necessary hardware included

Fits 2017-2023 Ford F-250 and F-350 Super Duty trucks (6.7L).

The ROUSH Performance Exhaust Kit provides a high-flow upgrade for your 6.7L Super Duty, combining signature styling with heavy-duty construction. Engineered from 4-inch mandrel-bent 304 stainless steel, this system improves exhaust flow and reduces weight compared to the factory equipment. The single-piece design allows for a straightforward installation using standard hand tools, ensuring a precise fit on the vehicle's mounting points.

The system is finished with dual 5-inch polished tips that feature a laser-etched ROUSH logo for a custom aesthetic. For a leak-free seal and seamless integration, an OEM exhaust gasket is included in every kit. Built to withstand corrosion and harsh conditions, this system is backed by the industry-leading ROUSH Limited Lifetime Warranty.

• System Diameter: 4-inch mandrel-bent tubing
• Material: 304 stainless steel for corrosion resistance
• Tip Finish: 5-inch polished tips with laser-etched ROUSH logo
• Installation: Single-piece design for easy bolt-on fitment
• Includes: OEM exhaust gasket
• MPN: 422126
• Warranty: Limited Lifetime Warranty

Fits select 2007-2018 Dodge and Ram 2500/3500 trucks (6.7L).

The MagnaFlow PRO DPF Series 17874 is a weight-optimized, high-flow exhaust system designed to replace the restrictive factory piping behind the Diesel Particulate Filter. This filter-back kit is engineered for durability and corrosion resistance using premium stainless steel and CNC precision robotic manufacturing for a perfect direct-fit installation. The 5-inch diameter mandrel-bent main piping features a muffler-delete design, providing a throaty performance sound while maintaining a mild interior cab environment and moderate exterior volume.

This emissions-legal system exits behind the rear passenger tire and is finished with an aggressive 6-inch intercooled tip, designed to manage heat and enhance the truck's profile. All necessary hardware is included for a straightforward installation to factory mounting points.

• Series: PRO DPF Series
• Piping Diameter: 5.0 in.
• Tip Specifications: 6.0 in. Polished, Welded-Single Wall, Angle Cut, Rolled Edge, Intercooled
• Exit Style: Single Passenger Side Rear Exit
• Material: Stainless Steel
• Construction: Mandrel-Bent Tubing, Muffler Delete
• Installation: Direct-Fit, Bolt-on
• MPN: 17874
• Warranty: Limited Lifetime

Fits select 2008-2025 Ford F-250 and F-350 Super Duty (4.6L / 6.4L / 6.7L).

The MagnaFlow Pro Series Filter-Back Performance Exhaust System 17873 is engineered for those looking to improve exhaust flow and achieve a deep, throaty sound on their Ford Super Duty. This system is constructed from weight-optimized, corrosion-resistant stainless steel for long-term durability in harsh environments. Featuring 4-inch mandrel-bent main piping and a muffler-delete design, it balances performance gains with a tuned sound profile that is mild inside the cabin and moderate on the exterior.

• 4-inch mandrel-bent stainless steel piping for optimized flow
• Muffler-delete design for a signature MagnaFlow performance sound
• Dual same-side exit behind the passenger rear tire
• 5-inch polished welded-on single wall angle cut rolled edge tips
• Intercooled tip design to manage heat and enhance aesthetics
• Direct-fit, bolt-on installation with CNC precision manufacturing
• Emissions-legal filter-back configuration
• Backed by MagnaFlow's limited lifetime warranty
• Manufacturer Part Number: 17873

Fits select 2008-2025 Ford F-250 and F-350 Super Duty models (6.4L / 6.7L).

The MagnaFlow Pro Series Filter-Back Performance Exhaust System 17872 is a weight-optimized, direct-fit solution designed for heavy-duty performance and long-term durability. This system replaces the restrictive factory exhaust components from the filter back, utilizing 5-inch mandrel-bent stainless steel piping to maximize flow. The muffler-delete design provides the signature MagnaFlow sound—moderate on the exterior with a mild interior presence—while remaining emissions-legal.

Built with CNC precision robotic manufacturing, this kit features a single passenger-side rear exit finished with a massive 6-inch polished, welded-on intercooled tip. The tip is constructed with a single-wall, angle-cut rolled edge for an aggressive profile that withstands the heat of high-output diesel applications.

• Manufacturer Part Number: 17872
• Construction: Corrosion-resistant stainless steel
• Piping Diameter: 5-inch mandrel-bent
• Tip Specs: 6-inch polished intercooled, angle-cut, rolled edge
• Exit Style: Single passenger side rear
• Sound Level: Moderate exterior, mild interior
• Installation: Direct-fit design; includes necessary hardware
• Warranty: Limited lifetime

Fits select 2019-2025 Ram 2500 and 3500 models (6.7L).

The MagnaFlow Black Series Filter-Back Performance Exhaust System 17071 delivers dyno-proven power and a deep, aggressive tone for 6.7L diesel-equipped Ram heavy-duty trucks. This premium kit is constructed from durable, mandrel-bent 5-inch 409 stainless steel tubing, finished with a high-temperature satin black coating for maximum corrosion resistance and a stealthy, custom look. The system is precision-engineered using CNC robotic manufacturing for a direct-fit installation that utilizes factory mounting points.

Designed for the enthusiast who wants a moderate exterior sound without compromising cabin comfort, this system provides a mild interior resonance. The exhaust exits via a single passenger-side rear outlet, featuring a massive 6-inch black-coated 300-series stainless steel intercooled tip with a single-wall, angle-cut rolled edge. This filter-back layout ensures compatibility with your truck's DPF system while optimizing exhaust flow through the tailpipe.

• 5-inch mandrel-bent 409 stainless steel main piping
• High-temperature satin black coating for superior durability
• 6-inch black-coated 300-series stainless steel intercooled tip
• Single passenger-side rear exit
• Direct-fit, bolt-on installation
• Moderate exterior and mild interior sound profile
• Manufacturer Part Number: 17071

Fits select 2008-2026 Ford F-250 and F-350 Super Duty models (6.4L / 6.7L).

The MagnaFlow Black Series Filter-Back Performance Exhaust System 17067 is engineered to deliver dyno-proven performance and a signature deep resonance for Ford Super Duty diesel trucks. This system replaces the factory post-DPF section with high-flow 5-inch mandrel-bent 409 stainless steel tubing, finished in a high-temp satin black coating for superior corrosion resistance and a stealthy aesthetic. Designed for a direct-fit installation, this kit utilizes CNC precision robotic manufacturing to ensure perfect alignment with factory mounting points.

The system features a single passenger-side rear exit, capped with a massive 6-inch intercooled tip. This 300 Series stainless steel tip uses a single-wall, angle-cut rolled edge design with a black powder-coated finish to maintain a clean look while managing heat. Acoustically tuned for a moderate exterior growl and a mild interior drone, it provides a noticeable upgrade in sound without compromising cabin comfort during long hauls.

• Main Piping Diameter: 5in.
• Exit Style: Single Passenger Side Rear
• Tip Diameter: 6in.
• Tip Type: Intercooled, Single Wall, Angle Cut, Rolled Edge
• Material: 409 Stainless Steel (Tubing), 300 Series Stainless Steel (Tip)
• Finish: High Temp Satin Black Coating
• Installation: Direct-Fit Bolt-On
• Manufacturer Part Number: 17067
• Warranty: Limited Lifetime Construction; 1-Year Finish

Fits 2007-2012 Dodge Ram 2500 and 3500 models with the 6.7L Cummins turbo diesel engine.

The Diamond Eye K5252S 5-inch DPF-back exhaust system is engineered to reduce backpressure and improve the exhaust flow on your heavy-duty Ram. Utilizing CNC mandrel-bending technology, this kit maintains a consistent 5-inch diameter through every curve, eliminating the restrictions found in stock piping. Constructed from durable stainless steel, this system is designed to withstand harsh road conditions and high exhaust temperatures while providing a clean, single-exit appearance.

• System Type: DPF-Back (Diesel Particulate Filter Back)
• Exit Style: Single Outlet
• Tubing Diameter: 5-inch OD
• Material: High-quality Stainless Steel
• Manufacturing: CNC Mandrel-bent tubing for maximum flow efficiency
• Manufacturer Part Number: K5252S
• Fitment Note: Replaces factory exhaust components from the DPF rearward

Fits select 2007-2012 Dodge Ram 2500 and 3500 models (6.7L Cummins Diesel).

Improve the efficiency and performance of your 6.7L Cummins with the Diamond Eye K5252A DPF-back exhaust kit. This 5-inch single-exit system is designed to replace the restrictive factory piping behind the Diesel Particulate Filter (DPF), allowing for improved exhaust flow and lower exhaust gas temperatures (EGTs) while maintaining your vehicle's emissions-compliant setup. Manufactured from durable aluminized steel, this kit offers a cost-effective solution for owners seeking better performance and a more robust exhaust note without the cost of stainless steel.

Each kit is engineered in Diamond Eye's state-of-the-art facility using precision CNC mandrel-bending technology. This ensures constant-diameter curves that eliminate the flow restrictions found in standard crush-bent tubing. The system is designed for a precise fit, utilizing factory-style hangers for a straightforward installation process.

• System Type: DPF-Back
• Tubing Diameter: 5-inch
• Exit Configuration: Single Exit
• Material: Aluminized Steel (AL)
• Construction: CNC Mandrel-Bent Tubing
• Engine Compatibility: 6.7L Cummins Turbo Diesel
• Manufacturer Part Number: K5252A

Fits 2011-2014 Ford F-250 and F-350 Super Duty trucks (King Ranch, Lariat, Platinum, XL, XLT) equipped with the 6.7L Powerstroke diesel engine.

The Diamond Eye K4376A 4-inch DPF-back exhaust system is designed to improve exhaust flow and lower exhaust gas temperatures (EGTs) by replacing the restrictive factory tailpipe section. Utilizing CNC mandrel-bent 4-inch tubing, this system ensures consistent diameters through every bend, minimizing turbulence and backpressure. The single-exit configuration is constructed from durable aluminized steel, providing a high-performance exhaust solution that retains your vehicle's emissions equipment.

• 4-inch CNC mandrel-bent tubing for unrestricted airflow
• Aluminized steel construction for durability and value
• Direct bolt-on installation behind the factory Diesel Particulate Filter (DPF)
• Single-exit tailpipe design
• Includes all necessary clamps and hangers for installation
• Manufacturer Part Number: K4376A

Fits 2017-2026 Ford F-250 and F-350 Super Duty models (V8-6.7L / 6.7L).

The aFe ATLAS DPF-back exhaust system is engineered to maximize flow and durability for your Power Stroke diesel. This system is constructed from 5-inch mandrel-bent aluminized steel tubing, which reduces restriction and improves exhaust velocity compared to stock components. Designed for a precise fit, it utilizes all factory mounting locations and OE-style bayonet hangers for a stable, hassle-free installation that requires no custom fabrication.

This exhaust features a massive 7-inch polished 304 stainless steel tip, complete with a riveted laser-cut aFe Power logo plate for a distinct look. To ensure long-term durability, the tip includes an integrated drain port on the bottom to prevent moisture collection and protect against corrosion. The system is secured with high-quality OE-style flanges and band clamps, providing a complete 360-degree sealing surface for a leak-free setup.

• 5-inch mandrel-bent aluminized steel tubing for maximum flow
• 7-inch polished 304 stainless steel tip with laser-cut badge
• Direct-fit installation using factory mounting locations
• OE-style bayonet hangers and high-quality band clamps included
• Tip includes a bottom drain port to prevent rust and corrosion
• Engineered and manufactured in Corona, California
• Manufacturer Part Number: 49-03090-P

Fits select 2024-2026 Chevrolet Silverado 2500 HD/3500 HD and GMC Sierra 2500 HD/3500 HD (V8-6.6L).

Enhance the exhaust flow and appearance of your heavy-duty GM truck with the aFe POWER Large Bore-HD DPF-back exhaust system. This system is built from 5-inch mandrel-bent 409 stainless steel tubing, providing maximum durability and improved exhaust flow over stock. Each system is 100% MIG-welded to ensure race-proven strength that can handle the high temperatures and vibration of heavy towing and diesel performance.

The system is finished with a massive 7-inch diameter black 304 stainless steel clamp-on tip, featuring a riveted aFe POWER logo plate for a distinct custom look. Designed for a precise fit, this exhaust utilizes factory-style hangers and mounts directly to factory locations. Please note that some cutting may be required depending on the specific wheelbase; refer to the provided instructions for details.

• Constructed from 5-inch mandrel-bent 409 stainless steel tubing for maximum flow
• 7-inch diameter black 304 stainless steel clamp-on exhaust tip with logo plate
• 100% MIG-welded for long-term structural integrity
• Utilizes factory-style hangers for a secure, hassle-free installation
• Includes all necessary hardware for a complete setup
• Manufacturer Part Number: 49-44147-B

Fits select 2020-2024 Chevrolet Silverado and GMC Sierra 2500 HD/3500 HD trucks (V8-6.6L).

The aFe Power Large Bore-HD DPF-back exhaust system is engineered to optimize exhaust flow and durability for heavy-duty GM trucks. This system is constructed from 5" mandrel-bent 409 stainless steel tubing, providing maximum strength while maintaining smooth exhaust gas transitions. For long-lasting structural integrity, the entire assembly is 100% MIG-welded by hand.

Finishing the system is a massive 6" diameter polished 304 stainless steel intercooled clamp-on exhaust tip, featuring a riveted aFe POWER logo plate. The intercooled design helps reduce temperatures at the tailpipe exit. Installation is straightforward using factory-style hangers that mount directly to OEM locations. Note that some cutting may be required depending on the specific wheelbase configuration.

• Manufacturer Part Number: 49-44125-P
• Material: 5" Mandrel-Bent 409 Stainless Steel Tubing
• Tip Specification: 6" Polished 304 Stainless Steel Intercooled Tip
• Construction: 100% MIG-Welded for race-proven durability
• Fitment Compatibility: Double Cab/Short Bed (149.4" WB), Crew Cab/Short Bed (158.9" WB), Double Cab/Long Bed (162.4" WB), Crew Cab/Long Bed (172" WB)
• Installation: Utilizes factory-style hangers and includes all necessary hardware

Fits 2007-2010 Chevrolet Silverado and GMC Sierra 2500 HD/3500 HD models equipped with the V8-6.6L LMM Duramax diesel engine.

The aFe MACHForce XP DPF-back exhaust system is engineered to optimize exhaust flow and lower exhaust gas temperatures (EGTs) on your heavy-duty GM truck. Constructed from 4-inch mandrel-bent 409 stainless steel tubing, this system provides a significant upgrade over restrictive factory piping. The 24-inch long high-flow muffler is specifically designed to absorb high-pitched tones while maintaining a powerful, deep exhaust note without sacrificing performance.

Installation is a direct bolt-on process using factory mounting locations. The system features heavy-duty OE-style bayonet hangers and a high-quality flange to ensure the pipes remain stable even under high-vibration and high-heat conditions. A polished, intercooled tip provides a clean finish and helps manage heat at the exit point.

• 4-inch mandrel-bent 409 stainless steel tubing for maximum flow
• Straight-through 24-inch muffler delivers a powerful sound and absorbs drone
• Polished intercooled exhaust tip for a premium look and heat management
• Heavy-duty OE-style bayonet hangers and stainless steel band clamps
• High-quality OE-style flange included for a 360-degree seal
• Includes all necessary hardware for a hassle-free installation
• 50-state emissions legal; retains factory DPF and catalytic converter
• Manufacturer Part Number: 49-44004

Fits 2017-2026 Ford F-250 and F-350 Super Duty trucks equipped with the V8-6.7L Power Stroke diesel engine.

The aFe Rebel XD Series DPF-back exhaust system is engineered to balance performance, durability, and aesthetics. Constructed from 4-inch mandrel-bent 409 stainless steel tubing, this system reduces exhaust backpressure and helps lower Exhaust Gas Temperatures (EGTs) by improving flow. Each system is MIG-welded for maximum strength and features high-quality band clamps to ensure a secure, leak-free seal without the need for custom fabrication.

This kit terminates in dual 5-inch black stainless steel tips featuring intercooling vents to dissipate heat. The system (MPN: 49-43102-B) utilizes factory mounting locations for a straightforward installation process that replaces the restrictive post-DPF section of your OE exhaust.

• 4" mandrel-bent 409 stainless steel tubing for increased flow
• Dual 5" black stainless steel intercooled tips
• MIG-welded for long-term durability
• Uses factory mounting points for a hassle-free install
• Includes heavy-duty band clamps
• Manufacturer Part Number: 49-43102-B

Fits 2017-2026 Ford F-250 and F-350 Super Duty trucks equipped with the V8-6.7L diesel engine. This aFe Power LARGE BORE HD DPF-back exhaust system is engineered to optimize flow and manage exhaust gas temperatures (EGT) for heavy-duty towing and performance applications.

Constructed from 5-inch mandrel-bent 409 stainless steel tubing, this system provides a smooth transition for exhaust gases, reducing turbulence compared to stock setups. The 2-piece design simplifies installation, while heavy-duty bayonet-style hangers and high-quality band clamps ensure the system remains stable under high-vibration conditions. The system is finished with a large polished stainless steel slash-cut tip featuring integrated intercooling vents to reduce temperatures at the tailpipe, protecting surrounding components and trailers.

• Material: 5-inch mandrel-bent 409 stainless steel tubing
• Tip: Polished stainless steel slash-cut intercooled tip
• Installation: 2-piece design with OE-style bayonet hangers and band clamps
• Performance: Designed to lower EGTs and improve exhaust flow
• Authenticity: Laser-cut aFe Power logo plate riveted to the assembly
• Manufacturer Part Number: 49-43090-P

Fits 2017-2026 Ford F-250 and F-350 Super Duty (V8-6.7L).

The aFe Power Large Bore-HD DPF-back exhaust system is engineered to improve exhaust flow and lower exhaust gas temperatures (EGTs) on your Power Stroke diesel. Constructed from 5-inch mandrel-bent 409 stainless steel tubing, this system provides a smooth path for exhaust gases, reducing turbulence compared to stock setups. The 409 stainless steel construction offers excellent corrosion resistance and heat cycling durability for heavy-duty applications.

This system features a two-piece design and utilizes OE-style bayonet hangers to maintain stability during high-vibration conditions. The exhaust is finished with a black stainless steel slash-cut tip featuring intercooling vents specifically designed to reduce temperatures at the tailpipe exit. A riveted, laser-cut stainless steel aFe Power logo plate completes the aggressive look.

• 5-inch mandrel-bent 409 stainless steel tubing for maximum flow
• Black stainless steel intercooled slash-cut tip reduces exit temperatures
• OE-style bayonet hangers and heavy-duty band clamps for a secure fit
• Two-piece design facilitates a straightforward installation process
• Riveted laser-cut stainless steel logo plate
• Manufacturer Part Number: 49-43090-B

Fits 2020-2023 Ram 1500 Big Horn, HFE, Laramie, Longhorn, Limited, Lone Star, Rebel, and Tradesman models (V6-3.0L EcoDiesel).

The aFe Large Bore-HD DPF-back exhaust system is engineered to improve exhaust flow and durability on your EcoDiesel-equipped Ram. Constructed from 3-inch mandrel-bent 409 stainless steel tubing, this system maintains consistent diameters through every curve to reduce backpressure. The entire assembly is 100% MIG-welded for maximum structural integrity and long-term reliability under heavy use.

This direct bolt-on system utilizes factory-style flanges and hangers, requiring no cutting or custom modifications for a secure, hassle-free installation. The kit is finished with dual 5-inch diameter polished 304 stainless steel clamp-on exhaust tips, each featuring a riveted aFe POWER logo plate for a distinctive look.

• 3-inch mandrel-bent 409 stainless steel tubing for maximum strength
• Dual 5-inch diameter polished 304 stainless steel clamp-on tips
• 100% MIG-welded construction for race-proven durability
• Utilizes factory mounting points and flanges for an OE-style fit
• Includes all necessary hardware for installation
• Manufacturer Part Number: 49-42080-P

Fits 2020-2023 Ram 1500 models equipped with the V6-3.0L turbo diesel engine.

The aFe Power Large Bore-HD DPF-back exhaust system is engineered for maximum durability and exhaust flow. This system is constructed from 3-inch mandrel-bent 409 stainless steel tubing to ensure consistent diameters through every bend, reducing backpressure and improving performance. For maximum structural integrity, the entire system is 100% MIG-welded by hand.

This system concludes with dual 5-inch diameter black-finished 304 stainless steel clamp-on exhaust tips, featuring a riveted-on aFe POWER logo plate. Designed as a direct bolt-on solution, it utilizes factory-style flanges and hangers for a secure fit without the need for cutting or permanent modifications to your truck.

• 3-inch mandrel-bent 409 stainless steel tubing for improved flow
• Dual 5-inch diameter black 304 stainless steel clamp-on tips
• Direct bolt-on installation using factory mounting points and flanges
• 100% MIG-welded for superior strength and longevity
• All necessary installation hardware included
• Manufacturer Part Number: 49-42080-B

Fits 2021-2023 Jeep Gladiator models (V6-3.0L td).

The aFe Power Vulcan Series DPF-back exhaust system is engineered to provide the 3.0L EcoDiesel Gladiator with improved durability and a custom aesthetic. This system is constructed from 3-inch mandrel-bent 304 stainless steel tubing, which ensures consistent diameter and reduced restriction through every bend. MIG-welded for race-proven strength, this exhaust is designed to withstand the vibration and heat cycles of heavy use.

This is a direct bolt-on system that utilizes factory-style flanges and hangers for a secure, hassle-free installation that requires no cutting or permanent modifications to your vehicle. The system is finished with a 4-1/2 inch diameter black 304 stainless steel clamp-on exhaust tip, featuring a riveted stainless steel aFe POWER logo plate.

• 3-inch mandrel-bent 304 stainless steel tubing for maximum corrosion resistance
• 4-1/2 inch black 304 stainless steel clamp-on exhaust tip with logo plate
• Direct bolt-on fitment using factory mounting locations and flanges
• MIG-welded construction for superior structural integrity
• All necessary hardware included for installation
• Manufacturer Part Number: 49-38093-B

Fits 2010-2025 Mercedes-Benz Sprinter 2500 and 3500 Base models.

Enhance your Sprinter’s exhaust system with the aFe Vulcan Series DPF-back exhaust. Constructed from 3-inch mandrel-bent 304 stainless steel tubing, this system provides superior flow and long-term durability. It is finished with a 4-inch polished 304 stainless steel clamp-on tip, featuring a laser-etched aFe POWER logo for a professional look.

This system is designed for versatility, offering both side-exit and rear-exit tailpipe configurations to effectively clear exhaust gases from beneath the vehicle. Installation is a direct bolt-on process that utilizes factory-style hanger mounting points, requiring no cutting or permanent modifications to your chassis.

• 3-inch mandrel-bent 304 stainless steel tubing for maximum durability
• 4-inch polished 304 stainless steel clamp-on exhaust tip
• Selectable side-exit or rear-exit tailpipe configurations
• 100% MIG-welded for race-proven strength
• Direct bolt-on installation; no cutting or modifications required
• Utilizes factory mounting points for secure fitment
• Manufacturer Part Number: 49-36502-P