Fits select 1964-1973 Buick, Chevrolet, and Pontiac passenger cars equipped with a GM 12-bolt rear differential. This Yukon Gear replacement differential cover provides a clean, custom upgrade for enthusiasts looking to replace a weathered or boring factory steel cover.

Designed to replicate the stock OE profile, this cover ensures proper clearance for internal rotating components while offering a high-luster chrome finish. It is an ideal choice for restorations and street machines where both drivetrain protection and under-car aesthetics are priorities. The stamped steel construction offers a precise fit against the differential housing to prevent leaks when paired with a quality gasket.

• Specifically engineered for GM 12-bolt passenger car rear ends
• Durable chrome finish for enhanced corrosion resistance and styling
• Direct-fit OE design maintains factory clearances
• Compatible with a wide range of A-body, F-body, and X-body classic vehicles
• Manufacturer Part Number: YP C1-GM12P

Fits select 1975-2014 Ford, Lincoln, and Mercury vehicles equipped with the 8.8-inch rear differential, including F-150, Mustang, Ranger, Bronco, and Crown Victoria.

Give your vehicle a classic, finished look with this Yukon Gear chrome replacement differential cover. Designed to replace the dull factory stamped-steel unit, this cover maintains the original equipment (OE) profile and dimensions to ensure proper clearance and a straightforward installation on your Ford 8.8" rear end. It is an ideal solution for restoration projects or street trucks where a clean aesthetic is required without moving to a bulky aftermarket girdle.

• Fits Ford 8.8-inch differential housings
• High-luster chrome finish for improved aesthetics
• Standard stamped-steel OE design
• Direct-fit replacement for factory covers
• Manufacturer Part Number: YP C1-F8.8

Fits select 1978-2011 Ford, Lincoln, Mercury, and Mazda vehicles with the Ford 7.5-inch rear differential.

Upgrade the appearance of your drivetrain with the Yukon Gear Chrome Differential Cover. This unit replaces the plain factory stamped-steel cover with a high-luster chrome finish, providing a clean, custom look for your undercarriage without altering the original clearance or design. It is manufactured to follow OE specifications for a precise fit on Ford 7.5-inch housings, making it a straightforward bolt-on replacement during your next fluid service or restoration project.

• Direct replacement for factory Ford 7.5-inch differential covers
• Durable stamped steel construction
• High-quality chrome plating for corrosion resistance and aesthetics
• Retains stock OE design and profile
• Manufacturer Part Number: YP C1-F7.5

Fits select 1985-2004 Ford E-250, E-350 Econoline, F-150, F-250, and F-350 models with the 10.25-inch rear axle.

Replace your weathered factory unit with this Yukon Gear chrome differential cover. Designed specifically for the Ford 10.25-inch ring gear housing, this cover maintains the exact OE design and clearances while adding a custom mirror-chrome finish. This is a direct-fit component that bolts to factory mounting points, providing a straightforward upgrade for your truck or van's drivetrain aesthetics.

• Fits Ford 10.25-inch differential housings
• Durable stamped steel construction
• Premium chrome finish for corrosion resistance and style
• Maintains original equipment (OE) design and fluid capacity
• Manufacturer Part Number: YP C1-F10.25

Fits select 1988-2015 Ford F-350 and E-350, Chevrolet/GMC 3500 series, and Dodge Ram 2500/3500 trucks and vans equipped with the Dana Spicer 80 rear axle.

Replace your weathered or rusted factory differential housing with this Yukon Gear & Axle chrome replacement cover. This unit is engineered to match the stock OE design for a perfect fit while providing a high-luster chrome finish that elevates the look of your vehicle's undercarriage. It is a direct-fit solution that bolts onto factory mounting points using standard hardware.

• Part Type: Differential Cover
• Axle Fitment: Dana Spicer 80
• Finish: Polished Chrome
• Design: OE-Style Replacement
• MPN: YP C1-D80

Fits select 1966-2010 Chrysler, Dodge, Mitsubishi, and Plymouth vehicles with the 9.25-inch rear differential (5.9L).

Give your vehicle's drivetrain a refreshed, custom look with the Yukon Gear Chrome Replacement Differential Cover. This cover is engineered to the original equipment (OE) design, ensuring a proper fit and reliable seal for Chrysler 9.25-inch rear axles. The high-luster chrome finish provides a significant aesthetic upgrade over dull, factory-stamped steel covers that are often prone to corrosion and road wear.

• Axle Fitment: Chrysler 9.25-inch rear differential
• Finish: High-luster chrome plating
• Design: Direct OE-style replacement stamped steel
• Solution: Replaces worn or rusted factory covers with an upgraded finish
• Manufacturer Part Number: YP C1-C9.25

Fits 1963-1979 Chevrolet Corvette models including Base, Stingray, and Pace Car editions.

The Yukon Gear & Axle Mighty Seal is engineered to provide a precision, leak-proof fit for the rear differential side yoke on C2 and C3 Corvettes. These seals utilize modern manufacturing technologies to ensure a tighter fit than standard replacements, effectively preventing differential fluid leaks at the stub axle interface. This is a critical component for maintaining the lubrication and longevity of your Corvette's independent rear suspension drivetrain.

• Direct replacement for the side yoke stub axle seal
• Precision-manufactured for long-term durability and heat resistance
• Designed to meet or exceed OE specifications for fitment and sealing
• Protects rear differential internals by maintaining fluid levels
• Manufacturer Part Number: YMSG1016

Fits 2018 Jeep Wrangler and Wrangler JK Rubicon and Unlimited Rubicon models.

Yukon Mighty Seals are engineered using state-of-the-art design software to ensure a precision fit that provides a reliable, long-lasting seal for your drivetrain. These small parts are built to deliver consistent performance, replacing worn factory seals to prevent leaks and protect your differential internals. This specific seal is designed for the 220 mm rear pinion found in select Dana 44 applications.

• Manufacturer Part Number: YMSC1029
• Seal Surface Diameter: 2.126 in.
• Outer Diameter: 3.393 in.
• Application: 220 mm Rear Pinion Seal
• Engineered for precise fitment and durability

Fits select 2003-2012 Dodge and Ram 1500, 2500, and 3500 trucks equipped with the 9.25-inch AAM front solid axle.

Yukon Mighty Seals are engineered using the latest manufacturing technologies to ensure a precision fit and a reliable, long-lasting seal. This pinion seal is a critical component for maintaining your front differential, preventing gear oil leaks and protecting internal components from road grime and moisture. Whether you are performing a gear swap or standard maintenance, these seals are designed to match the specific tolerances of the 9.25" AAM housing.

• Specifically designed for the Chrysler 9.25-inch AAM front solid axle
• Precision fitment to prevent differential fluid leaks
• High-quality construction for extended service life in demanding conditions
• Manufacturer Part Number: YMSC1008

Fits select 1967-1973 Ford Mustang, Fairlane, Ranchero, Gran Torino, Lincoln Continental, and Mercury Cougar and Comet models equipped with the Ford 9-inch rear differential.

Yukon Mighty Seals are engineered using modern design and manufacturing technologies to provide a precision fit that exceeds original equipment standards. This rear axle seal is specifically designed for 31-spline applications, ensuring a tight seal against the axle shaft to prevent gear oil leaks that can contaminate brake components and lead to premature bearing failure. Whether you are restoring a classic Mustang or maintaining a vintage Ranchero, these seals provide the durability needed for long-term service.

• Engineered for Ford 9-inch rear ends with 31-spline axles
• Compatible with 1.500-inch axle shaft diameters
• 2.264-inch outside diameter (OD) for a secure housing fit
• High-quality construction for superior fluid retention and debris exclusion
• Manufacturer Part Number: YMS9363S

Fits select 1965-2002 Chevrolet, GMC, Ford, and Dodge vehicles equipped with Dana 44HD, 60, 70, 70U, and 70HD differentials.

Yukon Mighty Seals are engineered to provide a precision fit that stops leaks and protects your drivetrain from gear oil loss and contaminant entry. These high-quality replacement pinion seals utilize the latest manufacturing technologies and materials to ensure a tight, long-lasting seal that withstands the high temperatures and pressures common in heavy-duty axle applications.

• Direct fit for Dana Spicer 44HD, 60, 70, 70U, and 70HD differential housings
• Precision-manufactured to modern tolerances for a leak-free installation
• Constructed with high-grade sealing materials for extended service life
• Designed for easy installation into factory or aftermarket Dana housings
• Manufacturer Part Number: YMS9316

Fits select 1964-2003 Buick, Chevrolet, GMC, Oldsmobile, and Pontiac vehicles with GM 7.2-inch IFS, 7.5-inch, 7.625-inch, and 8.2-inch differentials.

The Yukon Gear Mighty Seals Pinion Seal is engineered using the latest design and manufacturing technologies to provide a precision fit that effectively keeps gear oil in and contaminants out. Designed for long-term durability and resistance to wear, this seal is a direct replacement for worn factory units in a wide range of GM car and truck applications. By maintaining a tight seal at the pinion yoke, it prevents fluid loss that can lead to overheating and gear failure.

• Manufacturer Part Number: YMS8610
• Fits GM 7.2 in. IFS, 7.5 in., 7.625 in., and 8.2 in. differentials
• Outside Diameter (OD): 2.660 in.
• Precision-engineered for superior sealing performance and extended service life
• Replaces worn OE seals to prevent leaks and protect drivetrain components

Fits select 1960-2011 Chrysler, Dodge, Jeep, and Plymouth vehicles with 7.25-inch or 8.25-inch differentials (5.9L).

The Yukon Gear YMS8516N Mighty Seal is engineered for technicians and enthusiasts who require a dependable, leak-free seal for Chrysler 7.25" and 8.25" rear ends. Utilizing advanced manufacturing technologies, this pinion seal provides a precision fit that maintains its integrity under varied driving conditions, preventing lubricant loss and protecting your ring and pinion set from contamination and premature wear. Whether you are restoring a classic B-body or maintaining a late-model Ram, this seal ensures the housing remains oil-tight.

• Manufacturer Part Number: YMS8516N
• Designed for Chrysler 7.25" and 8.25" differential housings
• Precision-fit construction for long-term leak prevention
• High-grade materials resist thermal degradation and friction
• Direct replacement for worn OE pinion seals