Fits select 2007-2018 Jeep Wrangler and Wrangler JK Non-Rubicon models (Dana 30 front / Dana 44 rear).

The Yukon Gear & Axle YGK013 Gear and Install Kit Package provides a professional-grade, single-part-number solution for your Jeep re-gear project. Engineered to restore power and torque after installing larger tires or to enhance off-road prowess, this kit replaces factory gears with a performance 4.88 ratio. Yukon engineers utilize advanced heat-treating and state-of-the-art design to ensure the gear structure and surface finish meet rigorous automotive standards for longevity and quiet operation.

This comprehensive kit includes both front and rear ring and pinion gear sets, along with the corresponding Yukon Master Overhaul Kits. These overhaul kits provide the high-quality bearings, seals, and shim kits necessary for a precise setup, ensuring all critical mounting points and tolerances are met during the install.

• Gear Ratio: 4.88
• Front Differential: Dana 30
• Rear Differential: Dana 44
• Build Material: High-performance heat-treated steel
• Included Hardware: Front and rear ring & pinion sets, master overhaul kits (bearings, seals, shims)
• Protection: Eligible for Yukon Y.E.S. Plan lifetime protection
• Manufacturer Part Number: YGK013

Fits 2007-2018 Jeep Wrangler JK and Wrangler JK Unlimited (Non-Rubicon) with Dana 30 front and Dana 44 rear differentials.

The Yukon Gear & Axle YGK012 Gear and Install Kit Package provides a comprehensive, single-part-number solution for re-gearing your Jeep. This kit is specifically designed to restore torque and performance lost to larger tires or to provide additional low-end power for towing and off-road applications. By combining front and rear gear sets with complete overhaul kits, this package ensures you have all necessary components for a full differential service.

Yukon Gear sets are engineered using state-of-the-art design and advanced heat-treating techniques to maintain strict tolerances for tooth contact and surface finish. The included Master Overhaul Kits feature high-quality bearings and seals to ensure a long-lasting, quiet gear installation on both factory-equipped Dana 30 front and Dana 44 rear axles.

• 4.56 gear ratio
• Fits Dana 30 front and Dana 44 rear axles
• Complete set for front and rear differentials
• Includes front and rear ring and pinion sets
• Includes two Master Overhaul Kits with bearings, seals, and hardware
• Compatible with Non-Rubicon submodels only
• Manufacturer Part Number: YGK012

Fits 1997-2006 Jeep Wrangler TJ models equipped with a Dana 30 front axle and Dana 44 rear axle.

The Yukon Gear & Axle Gear & Install Kit (MPN: YGK008) is a comprehensive solution designed to simplify your re-gear project. This kit provides front and rear ring and pinion gear sets matched with the necessary Master Overhaul Kits under a single part number, ensuring component compatibility and reducing downtime during installation.

Yukon high-performance ring and pinion sets are engineered using state-of-the-art design and advanced heat-treating techniques. These processes ensure the gear structure and surface finish meet exacting tolerances for strength and longevity. Whether you are increasing tire size to maintain your power band or seeking better off-road crawling capability, these kits provide the durability required for demanding environments.

• Complete re-gear package for Dana Spicer 30 front and Dana Spicer 44 rear differentials
• 4.88 gear ratio for improved torque and performance with larger tires
• Includes front and rear ring and pinion sets
• Includes two Master Overhaul Kits with high-quality bearings, seals, and shims
• High-strength construction with advanced heat-treatment
• Manufacturer Part Number: YGK008

Fits 1991-2001 Jeep Cherokee (XJ) with Reverse Rotation Dana Spicer 30 front and Chrysler 8.25" rear axles.

The Yukon Gear & Axle YGK004 Gear and Install Kit Package provides a comprehensive solution for re-gearing your vehicle in a single part number. This kit is engineered for drivers increasing tire size or seeking more off-road power, delivering both front and rear ring and pinion gear sets along with complete Yukon Master Overhaul Kits. Each gear set is manufactured using advanced heat-treating techniques and state-of-the-art design to ensure the structure and surface finish meet rigorous quality standards.

• 4.88 gear ratio for front and rear differentials
• Includes front and rear ring and pinion sets and master overhaul kits
• Overhaul kits include high-quality bearings, seals, and shims for a complete installation
• Designed for Dana 30 Reverse Rotation front and Chrysler 8.25" rear axles
• Covered by the Yukon Y.E.S. Plan lifetime protection warranty
• Manufacturer Part Number: YGK004

Whether you are compensating for larger tires or restoring drivetrain efficiency, these components provide the durability and precision required for demanding applications. This package simplifies the sourcing process, ensuring all necessary parts for a professional gear swap are included and compatible.

Fits 1991-2001 Jeep Cherokee models equipped with a reverse rotation Dana 30 front axle and a Chrysler 8.25-inch rear axle.

The Yukon Gear & Axle YGK003 Gear and Install Kit is a comprehensive solution for re-gearing your Jeep. This package combines high-performance front and rear ring and pinion gear sets with Yukon Master Overhaul Kits into a single part number, simplifying the upgrade process for XJ models. These gear sets are engineered using state-of-the-art design and advanced heat-treating techniques to ensure precise tolerances and long-term durability under heavy loads.

Ideal for enthusiasts increasing tire size or looking to regain towing power, this kit includes everything needed to refresh your drivetrain. Yukon also offers the Y.E.S. Plan, providing a lifetime, comprehensive protection plan for the gear set for as long as you own the vehicle.

• Complete 4.56 ratio front and rear ring and pinion gear sets
• Front Master Overhaul Kit for reverse rotation Dana 30
• Rear Master Overhaul Kit for Chrysler 8.25-inch axle
• High-quality bearings, seals, and installation hardware included
• Manufacturer Part Number: YGK003

Fits select 1984-1995 Jeep Wrangler (YJ) and Cherokee (XJ) models equipped with a reverse rotation Dana Spicer 30 front axle and AMC Model 35 rear axle.

The Yukon Gear & Axle Gear & Install Kit Package (MPN: YGK001) provides a comprehensive solution for re-gearing your Jeep. This all-in-one kit eliminates the guesswork of sourcing individual components by combining front and rear ring and pinion gear sets with the necessary Yukon Master Overhaul Kits. Designed for those increasing tire size or looking to restore lost torque and towing power, these gears are engineered using advanced heat-treating techniques and state-of-the-art design for precise mesh and long-term durability.

• Complete front and rear re-gear solution in a single part number
• 4.56 gear ratio optimized for larger tires and off-road performance
• Includes high-quality ring and pinion sets for Dana 30 (Reverse) and Model 35
• Master Overhaul Kits include premium bearings, seals, shim kits, and installation hardware
• Manufacturer Part Number: YGK001

Whether you are tackling a weekend trail or restoring a classic XJ or YJ, Yukon Gear & Axle ensures every component meets exacting quality standards for surface finish and structural integrity.

Fits select 1985-2019 Toyota 4Runner, FJ Cruiser, Pickup, T100, Tacoma, Tundra, and Lexus GX470. This Yukon Gear & Axle high-performance ring and pinion gear set is designed to replace factory components or optimize drivetrain performance when upgrading to larger tires or seeking improved traction. Engineered for the Toyota 8.125-inch rear differential, these gears utilize advanced heat-treating techniques and precision surface finishing to ensure a quiet, reliable mesh and exceptional tooth strength under load.

As a leader in the automotive gear industry, Yukon Gear & Axle uses state-of-the-art design and rigorous quality testing to meet exacting specifications. This set provides the durability needed for high-horsepower applications and off-road environments. It is eligible for the Yukon Y.E.S. Plan, providing a lifetime, comprehensive protection plan for the original owner.

• Manufacturer Part Number: YG TV6-529-29
• Ratio: 5.29
• Ring Gear Diameter: 8.125 inches
• Ring Gear Bolt Count: 10
• Pinion Spline Count: 29
• Differential Location: Rear

Fits select 1985-2019 Toyota 4Runner, Tacoma, Tundra, Pickup, T100, FJ Cruiser, and Lexus GX470 with the 8.125-inch V6 rear differential.

Designed for durability and precise fitment, Yukon Gear & Axle high-performance ring and pinion gear sets are the industry benchmark for drivetrain upgrades. Whether you are correcting the gear ratio for larger tires, compensating for added engine horsepower, or seeking better torque multiplication for off-road performance, this 4.88 ratio set provides the strength needed for demanding applications. Yukon engineers utilize advanced heat-treating and rigorous quality testing to ensure the structure and surface finish meet exacting specifications for quiet operation and long-term reliability.

• Gear Ratio: 4.88
• Ring Gear Diameter: 8.125 inches
• Ring Gear Bolts: 10
• Pinion Spline Count: 29
• Material: High-strength steel with advanced heat treatment
• Manufacturer Part Number: YG TV6-488-29
• Includes the Yukon Y.E.S. Plan: Lifetime, comprehensive protection plan for the original owner

Fits select 1985-2019 Lexus GX470 and Toyota 4Runner, FJ Cruiser, Pickup, T100, Tacoma, and Tundra (V6 Rear).

This Yukon Gear & Axle high-performance ring and pinion gear set is engineered to provide reliable torque transfer and durability for Toyota V6 rear differentials. Whether you are compensating for larger tires or seeking to optimize traction after engine modifications, this 4.30 ratio set restores performance and gear synchronization. Each gear set undergoes advanced heat-treating and rigorous quality testing to ensure precise tooth contact and a superior surface finish that meets exacting specifications.

Designed for strength and longevity, this 8.125-inch ring gear set features a 29-spline pinion. It is an ideal solution for off-road enthusiasts and performance-minded drivers who require a gear set that can handle increased horsepower and demanding terrain. This product is eligible for the Yukon Y.E.S. Plan, providing lifetime protection for as long as you own the vehicle.

• Manufacturer Part Number: YG TV6-430-29
• Gear Ratio: 4.30
• Ring Gear Diameter: 8.125 inches
• Ring Gear Bolt Count: 10
• Pinion Spline Count: 29
• Differential: Toyota V6 Rear

Fits select 1985-2019 Lexus GX470 and Toyota 4Runner, FJ Cruiser, Pickup, T100, Tacoma, and Tundra with V6 rear differentials.

Yukon Gear & Axle high-performance ring and pinion gear sets are engineered to serve as the benchmark for quality in the automotive industry. Whether you are compensating for larger tires, restoring lost torque, or optimizing traction, this 4.11 ratio gear set provides the durability required for demanding off-road and street applications. Each gear set undergoes advanced heat-treating and state-of-the-art design processes to ensure the gear structure and surface finish meet exacting tolerances.

• Part Number: YG TV6-411-29
• Ratio: 4.11
• Pinion Spline Count: 29-Spline
• Differential: Toyota V6 Rear
• Advanced heat-treated steel construction for maximum longevity
• Covered by Yukon’s Y.E.S. Plan lifetime protection

Fits select 1985-2019 Toyota 4Runner, Tacoma, Pickup, T100, Tundra, FJ Cruiser, and Lexus GX470 models with the Toyota V6 8.125-inch rear differential.

Yukon Gear & Axle high-performance ring and pinion gear sets are engineered to provide a reliable solution for vehicles with increased horsepower, larger tires, or those requiring optimized traction performance. Each gear set is designed using state-of-the-art software and undergoes advanced heat-treating and quality testing to ensure precise tooth contact and a superior surface finish. This 3.73 ratio set is built to handle the rigors of both daily driving and off-road use, restoring proper power delivery and fuel economy after tire size or weight changes.

• Manufacturer Part Number: YG TV6-373-29
• Ring Gear Diameter: 8.125 inches
• Pinion Spline Count: 29
• Ring Gear Bolt Count: 10
• Gear Ratio: 3.73
• Compatible with Yukon Y.E.S. Plan lifetime protection

Fits 1991-1997 Toyota Land Cruiser Base models with reverse rotation front differentials.

Yukon Gear & Axle high-performance ring and pinion gear sets are engineered to handle the increased stress of larger tires and high-horsepower builds. These gear sets utilize advanced heat-treating techniques and state-of-the-art design to ensure a durable structure and a precise surface finish. This 4.88 ratio set is an essential upgrade for Land Cruiser owners looking to restore lost torque and optimize traction after installing oversized off-road tires.

This kit is designed specifically for the 8-inch reverse rotation front differential found in the 80-series chassis. It features a 29-spline pinion for increased strength and is backed by the Yukon Y.E.S. Plan, a lifetime, comprehensive protection plan for as long as you own the vehicle.

• Manufacturer Part Number: YG TLCF-488R-29
• Gear Ratio: 4.88
• Ring Gear Diameter: 8.00 inches
• Ring Gear Bolt Count: 10
• Pinion Spline Count: 29
• Differential Type: Toyota 8" Reverse Rotation Front
• Note: Does not fit clamshell design differentials

Fits select 1995-2007 Toyota 4Runner, Sequoia, Tacoma, and Tundra models with 7.5-inch reverse rotation front differentials.

Yukon Gear & Axle high-performance ring and pinion gear sets are engineered to provide reliable performance and durability for off-road and street applications. A 5.29 gear ratio is an ideal choice for vehicles with oversized tires, helping to restore lost torque and bring the engine back into its optimal power band. Each gear set undergoes advanced heat-treating and state-of-the-art testing to ensure a precise fit and a high-quality surface finish that minimizes noise and heat buildup.

• Part Number: YG T7.5R-529R
• Ring Gear Diameter: 7.500 inches
• Gear Ratio: 5.29
• Pinion Spline Count: 23
• Ring Gear Bolt Count: 10
• Rotation: Reverse
• Material: High-strength heat-treated steel

Fits select 1995-2007 Toyota 4Runner, Sequoia, Tacoma, and Tundra models with a 7.5-inch reverse rotation front differential.

Yukon Gear & Axle high-performance ring and pinion sets are engineered to provide reliable torque transfer and durability in demanding conditions. Designed for vehicles with increased horsepower or larger tires, these gear sets help restore lost performance and optimize traction. Each gear set undergoes advanced heat-treating and precision surface finishing to ensure quiet operation and long-term strength. This set is backed by the Yukon Y.E.S. Plan, a lifetime comprehensive protection plan for the original owner.

• Ring Gear Diameter: 7.500 inches
• Gear Ratio: 4.88
• Pinion Spline Count: 23
• Ring Gear Bolt Count: 10
• Rotation: Reverse
• Manufacturer Part Number: YG T7.5R-488R

Fits select 2003-2015 Nissan Frontier, Pathfinder, Titan, and Xterra models equipped with the M226 rear differential.

Yukon Gear & Axle high-performance ring and pinion gear sets are engineered for strength and durability in demanding applications. This 3.13 ratio gear set is designed to replace worn factory gears or restore performance for vehicles with specific tire and torque requirements. Utilizing advanced heat-treating techniques and precise surface finishing, Yukon ensures smooth operation and a long service life under high-load conditions.

• Manufacturer Part Number: YG NM226-313
• Differential Fitment: Nissan M226 Rear
• Ring Gear Diameter: 8.5 inches
• Gear Ratio: 3.13
• Pinion Spline Count: 24
• Ring Gear Bolt Count: 10
• Engineered for high-horsepower and oversized tire applications

Fits select 1968-2011 AMC, Dodge, Ford, Jeep, and Mercury vehicles with the standard rotation AMC Model 35 differential.

Yukon Gear & Axle high-performance ring and pinion gear sets are engineered to meet the demands of high-horsepower applications and oversized tires. By utilizing advanced heat-treating techniques and precision surface finishing, Yukon ensures a quiet, durable gear set that stands up to the rigors of both daily driving and off-road use. This 4.11 ratio set allows you to optimize your RPM range and restore lost torque after increasing tire size or adding significant engine power.

This set is backed by the Yukon Y.E.S. Plan, providing a lifetime, comprehensive protection plan for the original owner. Professional installation is recommended to ensure proper gear mesh and longevity.

• Manufacturer Part Number: YG M35-411
• Differential Fitment: Standard Rotation AMC Model 35
• Gear Ratio: 4.11
• Ring Gear Diameter: 7.562 inches
• Ring Gear Bolts: 8
• Pinion Spline Count: 26

Fits select 2014-2019 Cadillac Escalade, Chevrolet Silverado/Suburban/Tahoe/Express, and GMC Sierra/Yukon/Savana (5.3L).

This Yukon Gear & Axle high-performance kit is engineered to restore lost torque and improve traction for 2014-2019 GM trucks and SUVs equipped with the 9.5-inch ring gear. The package includes a precision-machined 4.10 ratio ring and pinion set and the Yukon Duragrip limited-slip differential, making it an ideal upgrade for vehicles with larger tires or those used for heavy towing. The Duragrip differential utilizes a four-spring clutch design for smooth yet aggressive power delivery, while the gear set undergoes advanced heat-treating to ensure long-term durability and quiet operation under load.

• Manufacturer Part Number: YG GM9.5-410-12B
• Differential Type: Yukon Duragrip (Limited Slip)
• Ring Gear Diameter: 9.5 Inches
• Gear Ratio: 4.10
• Compatibility: Fits GM 12-Bolt Cover Applications
• Engine Fitment: 5.3L
• Includes comprehensive installation hardware for a precise setup

Fits select 1988-2015 Chevrolet and GMC 2500 and 3500 series trucks and SUVs, including Silverado/Sierra HD, Suburban, and Avalanche models with the 9.25-inch front IFS differential.

Yukon Gear & Axle high-performance ring and pinion gear sets are engineered to provide the ultimate in strength and durability for re-geared front differentials. This gear set is designed for the GM 9.25-inch Independent Front Suspension (IFS) housing with reverse rotation. Yukon utilizes state-of-the-art heat-treating and precision machining to ensure a quiet, reliable surface finish and long-lasting performance, whether you are compensating for larger tire diameters or restoring torque for heavy towing.

• Manufacturer Part Number: YG GM9.25-456R
• Gear Ratio: 4.56
• Ring Gear Diameter: 9.25 inches
• Pinion Spline Count: 30
• Ring Gear Bolts: 12
• Rotation: Reverse Rotation (Front IFS)
• Construction: High-quality heat-treated steel

Fits 2010-2015 Chevrolet Camaro LS, LT, SS, Z/28, and ZL1 models equipped with the GM 8.6" IRS differential.

Yukon Gear & Axle high-performance ring and pinion gear sets are engineered for drivers who demand durability and precision. This 3.45 ratio set (MPN: YG GM8.6-345IRS) is designed to handle increased horsepower and optimize traction performance. Every gear set undergoes advanced heat-treating techniques and rigorous quality testing to ensure the structure and surface finish meet exacting specifications for reduced noise and long service life.

• Ring Gear Diameter: 8.60 inches
• Gear Ratio: 3.45
• Ring Gear Bolts: 10
• Pinion Spline Count: 32
• Housing Type: GM 8.6" Independent Rear Suspension (IRS)
• Manufacturer Part Number: YG GM8.6-345IRS

Built for the street or the track, Yukon offers its Y.E.S. Plan with this set—a lifetime, comprehensive protection plan covering your gears for as long as you own the vehicle.

Fits select 1980-2014 Buick, Cadillac, Chevrolet, and GMC vehicles with GM 8.5" or 8.6" rear differentials.

Yukon Gear & Axle high-performance ring and pinion sets are engineered to serve as the benchmark for quality in the automotive drivetrain industry. Designed for enthusiasts who have increased horsepower or upgraded to larger tire diameters, this 4.56 ratio gear set optimizes traction and restores performance. Each set undergoes advanced heat-treating and state-of-the-art testing to ensure the structure and surface finish meet exacting tolerances for quiet operation and long-term durability.

This gear set is compatible with both GM 8.5" and 8.6" housings, featuring a 10-bolt ring gear configuration and a 30-spline pinion. For added peace of mind, this unit is eligible for the Yukon Y.E.S. Plan, providing comprehensive protection for the lifetime of your vehicle ownership.

• Manufacturer Part Number: YG GM8.5-456
• Ring Gear Diameter: 8.50"
• Gear Ratio: 4.56
• Ring Gear Bolts: 10
• Pinion Spline Count: 30
• Fits GM 8.5" and 8.6" Differential Housings

Fits select 1980-2014 Buick, Cadillac, Chevrolet, and GMC vehicles equipped with GM 8.5-inch or 8.6-inch rear differentials. This gear set is engineered to restore performance lost to larger tires or to optimize power delivery for high-horsepower applications.

Yukon Gear & Axle high-performance ring and pinion sets are the industry benchmark for strength and precise tolerances. Utilizing state-of-the-art design and advanced heat-treating techniques, Yukon ensures every gear set features a superior surface finish and structural integrity. This 4.11 ratio set is ideal for improving off-the-line acceleration and managing effective gear ratios when running oversized wheels. For long-term peace of mind, this set is eligible for the Yukon Y.E.S. Plan, providing a lifetime, comprehensive protection plan for the original owner.

• Manufacturer Part Number: YG GM8.5-411
• Ring Gear Diameter: 8.50 inches
• Differential Fitment: GM 8.5" and 8.6"
• Gear Ratio: 4.11
• Pinion Spline Count: 30
• Ring Gear Bolt Count: 10
• High-strength construction for street, off-road, or track use