Fits select 1953-2006 Chevrolet, Dodge, Ford, GMC, International, and Jeep models with standard rotation Dana 44 axles (5.9L).

Yukon Gear & Axle high-performance ring and pinion gear sets are engineered for drivers who demand durability and precision. This 4.11 ratio "thick gear" set is specifically designed to allow the installation of higher numerical gears on a 3.73-and-down carrier, saving you the cost and labor of a carrier swap. Each set is manufactured using state-of-the-art design software and advanced heat-treating techniques to ensure the structure and surface finish withstand high-torque applications.

• Manufacturer Part Number: YG D44-411T
• Axle Compatibility: Dana 44 Standard Rotation
• Gear Ratio: 4.11
• Ring Gear Diameter: 8.50 inches
• Ring Gear Bolt Count: 10
• Pinion Spline Count: 26
• Carrier Fitment: Thick gear for 3.73 and down carrier

Whether you are compensating for larger tires or optimizing traction for high-horsepower builds, Yukon gears provide the reliability required for rigorous use. This gear set is covered by the Yukon Y.E.S. Plan, a lifetime, comprehensive protection plan for the original owner.

Fits select 1953-2006 Chevrolet, Dodge, Ford, GMC, International, and Jeep vehicles (5.9L).

This Yukon Gear & Axle high-performance ring and pinion gear set is the benchmark for Dana 44 differential builds. Engineered for those who have increased tire size or added significant horsepower, this 3.54 ratio set restores performance and optimizes traction. Each gear set is manufactured using state-of-the-art design and advanced heat-treating techniques to ensure a superior surface finish and precise tooth mesh for quiet, long-lasting operation.

• Designed for Standard Rotation Dana Spicer 44 housings
• 8.50-inch ring gear diameter with a 10-bolt mounting pattern
• 26-spline pinion for secure drivetrain engagement
• Advanced heat-treating process for maximum gear life and durability
• Eligible for Yukon's Y.E.S. Plan lifetime, no-questions-asked protection
• Manufacturer Part Number: YG D44-354

Fits 2007-2018 Jeep Wrangler and Wrangler JK models equipped with a Dana Spicer 30 reverse rotation front axle.

Yukon Gear & Axle high-performance ring and pinion sets are engineered to handle the increased loads of larger tires and high-horsepower builds. This 4.88 ratio gear set allows you to restore off-road torque and highway drivability after upgrading your Wrangler's tire size. Each gear set undergoes advanced heat-treating and rigorous quality testing to ensure the tooth surface finish and structural integrity meet exacting tolerances for quiet operation and long-term durability.

This short-pinion gear set is designed specifically for the Dana 30 JK housing and includes Yukon’s Y.E.S. Plan, a lifetime protection plan for the original owner. Professional installation is recommended to ensure proper gear patterning and backlash settings.

• Manufacturer Part Number: YG D30SR-488JK
• Gear Ratio: 4.88
• Ring Gear Diameter: 7.33 inches
• Ring Gear Bolt Count: 10
• Pinion Spline Count: 24
• Pinion Style: Short Pinion
• Axle Rotation: Reverse Rotation

Fits 2007-2018 Jeep Wrangler and Wrangler JK models equipped with a reverse rotation Dana Spicer 30 front axle.

Yukon Gear & Axle High Performance ring and pinion gear sets are engineered to handle the increased loads of larger tires and high-horsepower applications. This 4.56 ratio gear set is designed specifically for the Dana 30 JK short reverse pinion housing, providing the mechanical advantage needed to restore torque and performance after lifting your vehicle. Each gear set undergoes advanced heat-treating and rigorous quality testing to ensure a precise surface finish and long-term durability under demanding off-road conditions.

Yukon stands behind this set with the Y.E.S. Plan, a lifetime, comprehensive protection plan for the original owner. Whether you are re-gearing for 33-inch or 35-inch tires or replacing a worn factory set, this high-strength gear set delivers the reliability required for both daily driving and technical trails.

• Manufacturer Part Number: YG D30SR-456JK
• Gear Ratio: 4.56
• Ring Gear Diameter: 7.33 inches
• Ring Gear Bolt Count: 10
• Pinion Spline Count: 24
• Pinion Type: Short Reverse Rotation

Fits select 2007-2018 Jeep Wrangler and Wrangler JK (Dana 30 Front).

Yukon Gear & Axle high-performance ring and pinion gear sets are engineered for drivers looking to optimize traction and performance, whether compensating for larger tires or restoring drivetrain efficiency. These gear sets are designed specifically for the Dana 30 Short Reverse Pinion (SRP) front differential found in JK-generation Wranglers.

Yukon utilizes advanced heat-treating techniques and state-of-the-art design processes to ensure the structure and surface finish meet exacting tolerances. Each set undergoes leading-edge quality testing to provide a quiet, durable solution for off-road and street use. This 3.73 ratio set features a 24-spline pinion for a direct fit in the factory housing.

• Manufacturer Part Number: YG D30SR-373JK
• Differential Fitment: Dana 30 (Short Reverse Pinion)
• Gear Ratio: 3.73
• Pinion Spline Count: 24
• Compatible with Yukon Y.E.S. Plan lifetime protection

Fits select 1984-2001 Jeep Cherokee, Comanche, Wrangler, and Grand Wagoneer models equipped with a reverse rotation Dana 30 front axle.

Yukon Gear & Axle high-performance ring and pinion sets are engineered to be the benchmark of quality for automotive drivetrain components. Whether you are compensating for larger tires, restoring lost torque, or optimizing traction for off-road use, this 4.56 ratio gear set provides the mechanical advantage needed for increased performance. Each gear set undergoes advanced heat-treating and state-of-the-art quality testing to ensure the surface finish and structural integrity meet exacting tolerances for a quiet, long-lasting setup.

This shim-style Dana 30 set is designed for reverse rotation housings and does not utilize a crush sleeve. For added peace of mind, this kit is eligible for Yukon's Y.E.S. Plan, a lifetime, comprehensive protection plan for as long as you own the vehicle.

• Manufacturer Part Number: YG D30R-456R
• Ratio: 4.56
• Ring Gear Diameter: 7.20 inches
• Ring Gear Bolts: 10
• Pinion Spline Count: 26
• Axle Type: Dana Spicer 30 Reverse Rotation (Shim-style, no crush sleeve)

Fits select 1966-1996 Jeep, Ford, Volvo, American Motors, and International vehicles equipped with a standard rotation Dana Spicer 30 axle. This high-performance gear set is designed to restore performance and torque after installing larger tires or to optimize off-road crawling capability.

Yukon Gear & Axle ring and pinion sets are engineered for durability and quiet operation. Using state-of-the-art heat-treating and precision surface finishing, Yukon ensures each gear set meets strict tolerances for proper tooth contact and long service life. This kit is designed for standard rotation Dana 30 housings that do not use a crush sleeve, utilizing shims for precise pinion depth and bearing preload adjustment. Yukon stands behind this set with the Y.E.S. Plan, providing a lifetime, comprehensive protection plan for the original owner.

• Axle Model: Dana Spicer 30 (Standard Rotation)
• Gear Ratio: 5.38
• Ring Gear Diameter: 7.20 inches
• Ring Gear Bolt Count: 10
• Pinion Spline Count: 26
• Setup Style: Shimmed (No crush sleeve required)
• Manufacturer Part Number: YG D30-538

Fits select 2014-2023 Ram 2500 and 3500 models with the 9.25-inch front axle.

This Yukon Gear & Axle high-performance reverse ring and pinion gear set is engineered to deliver reliable strength and precise fitment for the Ram 9.25-inch front differential. Using state-of-the-art design software and advanced heat-treating techniques, Yukon ensures that each gear set meets exacting specifications for surface finish and structural integrity. This 4.30 gear ratio is an ideal solution for vehicles with larger tires or for owners looking to optimize traction and torque delivery in off-road or towing applications.

• Compatible with standard open differential housings
• Reverse rotation design for front axle applications
• Precision-cut 4.30 gear ratio
• Constructed using advanced heat-treating for maximum durability
• Manufacturer Part Number: YG C9.25R-430R-14
• Eligible for Yukon Y.E.S. Plan lifetime protection

Fits select 1966-2010 Chrysler, Dodge, Mitsubishi, and Plymouth vehicles with the Chrysler 9.25-inch rear differential (5.9L).

Yukon Gear & Axle High Performance ring and pinion gear sets are engineered to provide the strength and precision required for demanding street and off-road applications. Whether you are compensating for larger tires, restoring lost torque after engine upgrades, or optimizing traction, this 3.90 ratio set provides the mechanical advantage needed to improve vehicle performance.

Each gear set is manufactured using advanced heat-treating techniques and state-of-the-art design processes to ensure the gear tooth structure and surface finish meet exacting specifications. This kit is designed specifically for the Chrysler 9.25-inch housing, utilizing a 29-spline pinion for a direct fit in compatible axle assemblies.

• Manufacturer Part Number: YG C9.25-390
• Ring Gear Diameter: 9.25 inches
• Gear Ratio: 3.90
• Pinion Spline Count: 29
• Ring Gear Bolt Count: 12
• Precision heat-treated for maximum durability
• Engineered for high-horsepower and oversized tire applications

Fits select 1966-2010 Chrysler, Dodge, Plymouth, and Mitsubishi models with the Chrysler 9.25" rear differential (5.9L).

Restore performance or compensate for larger tire diameters with this Yukon Gear & Axle high-performance ring and pinion gear set. Designed as the industry benchmark for quality, these gears are engineered to meet exacting specifications for structure and surface finish. Whether you are optimizing traction for a high-horsepower build or refreshing a worn OE differential, Yukon utilizes advanced heat-treating techniques to ensure maximum durability and quiet operation.

• 3.55 Gear Ratio
• 9.25" Ring Gear Diameter
• 12 Ring Gear Bolts
• 29 Spline Pinion
• High-strength steel construction with advanced heat treatment
• Manufacturer Part Number: YG C9.25-355

Yukon offers its Y.E.S. Plan, a lifetime, comprehensive protection plan covering your gear set for as long as you own the vehicle.

Fits 2012-2017 Jeep Wrangler and Wrangler Unlimited JK models equipped with automatic transmissions.

The Yukon Gear & Axle YDS007 is a high-strength steel front driveshaft assembly engineered for extreme off-road performance and reliability. Designed to replace the vulnerable factory unit, this driveshaft features 1310-series u-joints and increased operating angles to safely accommodate suspension lifts up to 4.5 inches. Tested in competitive motorsport environments, this assembly provides the necessary slip travel and durability to handle increased torque on the street or trail.

• Manufacturer Part Number: YDS007
• U-Joint Series: 1310
• Position: Front
• Transmission: Automatic Only
• Construction: High-strength steel
• Lift Compatibility: Up to 4.5-inch suspension lift
• Application: 2-door and 4-door models
• Protection: Yukon Y.E.S. Plan lifetime comprehensive protection

Fits select 1993-2015 Toyota T100, Tacoma, Tundra, and Sequoia models equipped with 30-spline axles. This Yukon Dura Grip (MPN: YDGT100-30-1) is a positraction limited slip differential (LSD) designed to deliver smooth, reliable traction for various terrains. Built for high-torque applications and longevity, this unit is fully rebuildable and engineered to handle the demands of both street and off-road driving.

• Fits all gear ratios
• High-strength nodular case construction
• Forged 4320 chromoly spider gears for maximum durability
• Composite clutches for smooth engagement and heat resistance
• Heavy-duty 4-pinion design
• Fully rebuildable internal components
• Proudly assembled in the USA and extensively tested for reliability

The Yukon Dura Grip provides aggressive power transfer while maintaining enough slip for street driveability. By utilizing a high-strength nodular iron case and chromoly internals, it offers a significant strength upgrade over factory open differentials or worn OEM units.

Fits select 2003-2015 Nissan Frontier, Pathfinder, Titan, and Xterra models equipped with the M226 rear differential and 32-spline axles.

The Yukon Dura Grip is a premium positraction limited slip differential designed to provide smooth yet aggressive traction across diverse terrains. Built for durability and performance, this unit replaces factory open or worn-out differentials to ensure both wheels receive power when you need it most. Constructed with a high-strength nodular iron case and forged 4320 chromoly spider gears, it is engineered to withstand the stresses of off-road use and heavy-duty towing.

This LSD features internal composite clutches for predictable engagement and a fully rebuildable design that ensures a long service life. Whether you are maintaining a daily driver or building a trail-ready rig, the Dura Grip delivers the reliability and strength required for the Nissan M226 platform.

• Manufacturer Part Number: YDGNTITAN-32-1
• Fits Nissan M226 rear housings with 32-spline axles
• Compatible with all gear ratios
• Forged 4320 chromoly spider gears for ultimate tooth strength
• High-strength nodular iron case construction
• Composite clutches for smooth traction and quiet operation
• Fully rebuildable and proudly assembled in the USA

Fits select 1968-2006 Jeep and AMC models—including Wrangler, Cherokee, Grand Cherokee, and Eagle—equipped with a Dana 35 (M35) rear axle, 27-spline shafts, and a 3.54 or numerically higher gear ratio.

The Yukon Dura Grip is a clutch-style positraction limited slip differential (LSD) engineered to provide smooth yet aggressive traction. It delivers the performance and confidence required for a wide variety of terrains, from daily street driving to off-road trails. Built with a high-strength nodular iron case and forged 4320 chromoly spider gears, this unit is designed for maximum durability and is fully rebuildable for long-term service.

• High-strength nodular iron case for increased rigidity and housing stability
• Forged 4320 chromoly spider gears for ultimate tooth strength and durability
• Composite clutches provide smooth engagement and reliable performance
• Fully rebuildable design ensures the unit can be serviced for a lifetime of use
• Assembled in the USA

• Manufacturer Part Number: YDGM35-4-27-1
• Axle Model: Dana 35 (M35)
• Spline Count: 27
• Carrier Range: 3.54 and Numerically Higher (e.g., 3.73, 4.10, 4.56)
• Internal Design: Clutch-Style Limited Slip

Fits select 2014-2024 Cadillac, Chevrolet, and GMC trucks and SUVs with GM 9.5-inch or 9.76-inch rear differentials.

The Yukon Gear Dura Grip is a premium limited-slip differential designed to deliver smooth yet aggressive traction for street and off-road performance. Built for durability and strength, the Dura Grip features a high-strength nodular iron case and internal components engineered to handle high-torque applications. This positraction unit replaces the standard open differential, ensuring power is distributed effectively to both wheels when you need it most.

• Forged 4320 chromoly spider gears for maximum durability and strength
• High-quality composite clutches provide smooth engagement and long service life
• Compatible with 33-spline axles and GM 9.5" or 9.76" housings
• Designed for 3.42 and numerically higher (shorter) gear ratios
• Fully rebuildable design for long-term serviceability
• Assembled in the USA and extensively tested for reliable performance
• Manufacturer Part Number: YDGGM9.5-4-33-12B