OMIX proudly offers all the parts you need to keep your Willys /Jeep running like new with quality standards that always meet or exceed those of the factory part. This replacement intermediate exhaust pipe fits 07-11 Wrangler JKU 4-door models equipped with 3.8-liter engines. Features 2.5- in. ID inlet/ 2.5- in. OD outlet and 77.00- in. overall length. For rubber exhaust hanger, use 17620.05. Replaces OE 52059938AF

• Limited 5 Year Warranty
• Direct Fit
• OE Style
• Steel

This Part Fits:

Your exhaust is the most multi-faceted system of your vehicle. It not only has to perform well, but it must also sound and look good. That makes choosing the right exhaust tip a tricky task, but luckily, Mishimoto offers a wide variety of exhaust tips that will put the cherry on top of your build.----Our dual-Y exhaust tips are constructed from 304 stainless-steel and feature slashed tips with staggered 3.5-inch outlets for an aggressive look. This kit includes two tips to fit dual exhaust. We offer these tips in a sleek polished finish to match almost any aesthetic. The double-wall design gives these tips a clean and high-end look, fitting of even the classiest car or truck. Like all our exhaust and performance parts, these Mishimoto dual-Y stainless-steel exhaust tips are backed by our Mishimoto Lifetime Warranty for a lifetime of style and durability.

• Universal exhaust tips add sleek style to your car or truck
• Double-wall construction creates a clean and high-end look
• Includes two tips with offset dual-Y design

Enhance the look of your Dodge Charger with our premium 5" Black Exhaust Tips. Designed for 2015-2024 models, this stylish upgrade delivers a sleek, aggressive appearance to match your vehicle's bold personality. Crafted from high-quality materials with a durable high-temperature resistant black finish, these exhaust tips resist rust and corrosion for long-lasting performance. It has a double-wall and direct-fit clamp on design, so it seamlessly integrates with your existing exhaust system for a clean, professional look. Easy to install and built to endure, these exhaust tips are the perfect way to elevate your vehicle's style. Backed by Mishimoto's lifetime warranty, you can trust the quality and reliability of these exhaust tips to deliver both style and performance for the long haul

• Double-wall design creates a clean and high-end look
• Designed to fit the 2015-2024 Dodge Charger V8
• Designed to fit with the OEM exhaust clamp

This Part Fits:

Your exhaust is the most multi-faceted system of your vehicle. It not only has to perform well, but it must also sound and look good. That makes choosing the right exhaust tip a tricky task, but luckily, Mishimoto offers a wide variety of exhaust tips that will put the cherry on top of your build.----Our dual offset exhaust tips are constructed from 304 stainless-steel and feature slashed tips with staggered 3-inch outlets for an aggressive look. We offer these tips in matte black, polished, or burnt finishes to match your vehicle's aesthetic. The double-wall design gives these tips a clean and high-end look, fitting of even the classiest car or truck. Installation of Mishimoto exhaust tips is easy with our slip-fit design that slides over existing 2.5-inch piping and the included clamp locks your tip in place. Like all our exhaust and performance parts, these Mishimoto dual offset stainless-steel exhaust tips are backed by our Mishimoto Lifetime Warranty for a lifetime of style and durability.

• Universal exhaust tips add sleek style to your car or truck
• Double-wall construction creates a clean and high-end look
• Offset dual-outlet design

Your exhaust is the most multi-faceted system of your vehicle. It not only has to perform well, but it must also sound and look good. That makes choosing the right exhaust tip a tricky task, but luckily, Mishimoto offers a wide variety of exhaust tips that will put the cherry on top of your build.----Our dual offset exhaust tips are constructed from 304 stainless-steel and feature slashed tips with staggered 3-inch outlets for an aggressive look. We offer these tips in matte black, polished, or burnt finishes to match your vehicle's aesthetic. The double-wall design gives these tips a clean and high-end look, fitting of even the classiest car or truck. Installation of Mishimoto exhaust tips is easy with our slip-fit design that slides over existing 2.5-inch piping and the included clamp locks your tip in place. Like all our exhaust and performance parts, these Mishimoto dual offset stainless-steel exhaust tips are backed by our Mishimoto Lifetime Warranty for a lifetime of style and durability.

• Universal exhaust tips add sleek style to your car or truck
• Double-wall construction creates a clean and high-end look
• Offset dual-outlet design

Your exhaust is the most multi-faceted system of your vehicle. It not only has to perform well, but it must also sound and look good. That makes choosing the right exhaust tip a tricky task, but luckily, Mishimoto offers a wide variety of exhaust tips that will put the cherry on top of your build.----Our double-wall exhaust tips are constructed from 304 stainless-steel and feature a 4.5-inch slashed tip for an aggressive look. We offer these tips in two styles with either a matte-black or polished finish to match your vehicle's aesthetic. The double-wall design gives these tips a clean and high-end look, fitting of even the classiest car or truck. Installation of Mishimoto exhaust tips is easy with our slip-fit design that slides over existing 2.5-inch piping and the included clamp locks your tip in place. Like all our exhaust and performance parts, these Mishimoto double-wall stainless-steel exhaust tips are backed by our Mishimoto Lifetime Warranty for a lifetime of style and durability.

• Universal exhaust tip adds sleek style to your car or truck
• Double-wall design creates a clean and high-end look
• 2.5-inch inlet with 4.5-inch outlet

Your exhaust is the most multi-faceted system of your vehicle. It not only has to perform well, but it must also sound and look good. That makes choosing the right exhaust tip a tricky task, but luckily, Mishimoto offers a wide variety of exhaust tips that will put the cherry on top of your build.----Our double-wall exhaust tips are constructed from 304 stainless-steel and feature a 4.5-inch slashed tip for an aggressive look. We offer these tips in two styles with either a matte-black or polished finish to match your vehicle's aesthetic. The double-wall design gives these tips a clean and high-end look, fitting of even the classiest car or truck. Installation of Mishimoto exhaust tips is easy with our slip-fit design that slides over existing 2.5-inch piping and the included clamp locks your tip in place. Like all our exhaust and performance parts, these Mishimoto double-wall stainless-steel exhaust tips are backed by our Mishimoto Lifetime Warranty for a lifetime of style and durability.

• Universal exhaust tip adds sleek style to your car or truck
• Double-wall design creates a clean and high-end look
• 2.5-inch inlet with 4.5-inch outlet

Your exhaust is the most multi-faceted system of your vehicle. It not only has to perform well, but it must also sound and look good. That makes choosing the right exhaust tip a tricky task, but luckily, Mishimoto offers a wide variety of exhaust tips that will put the cherry on top of your build.----Our carbon fiber exhaust tips are constructed from a base of black-chrome coated 304 stainless-steel and carbon fiber shrouds for a sleek and aggressive look. This kit includes two matching tips to suit dual-exhaust setups with 2.5-inch piping. Installation of Mishimoto exhaust tips is easy with our slip-fit design that slips over existing piping, while the included clamps lock your tips in place. Like all our exhaust and performance parts, these Mishimoto carbon fiber and stainless-steel exhaust tips are backed by our Mishimoto Lifetime Warranty for a lifetime of style and durability.

• Carbon fiber and stainless-steel exhaust tips add sleek and aggressive style
• Slip fit design easily installs over existing 2.5 pipes
• Includes two tips to suit dual exhaust setups

Upgrade your engine's performance and reliability with the Mishimoto manifold stud kit for your Cummins. These bolts are designed to increase the clamping force between the manifold and cylinder head, effectively minimizing the risk of boost-killing leaks and reducing the likelihood of manifold warpage. Anyone who has attempted to grapple a heavy manifold and turbocharger with one hand while attempting to line up a bolt hole with the other will appreciate the ease and convenience this stud kit provides. With 12-point hardware engineered to prevent nut rounding, gone are fears of stripped or rounded hardware. Plus, backed by a Lifetime Warranty, these manifold bolts offer peace of mind and assurance for the long haul.

• Increase clamping force between manifold and cylinder head, reducing chances for a boost-killing leak
• Chromium-infused steel provides strength and corrosion resistance
• Reduces risk of manifold warpage

This Part Fits:

Pump up the volume of your 2015+ Ford Mustang GT exhaust! The full 304 stainless steel, mandrel-bent construction provides optimal flow and excellent appearance. If you want the best in exhaust performance, pair this GT X or H-pipe with the Mishimoto 2015+ Ford Mustang GT Axleback exhaust. The Mishimoto 2015+ Ford Mustang GT X and H-Pipes fit both manual and automatic transmission vehicles, and just like all Mishimoto Mustang parts, comes with the Mishimoto Lifetime Warranty.

• Replaces the stock exhaust resonator with a free-flowing H pipe section
• Cut and clamp design specifically for the 2015+ Ford Mustang GT
• Full 304 stainless steel mandrel-bent construction

This Part Fits:

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99356HM. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Compact, lightweight construction enables installation in confined areas, welding is required
• Compact/Lightweight Construction Enables Installation In Confined Areas/Welding Is Required
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Durable 308 stainless steel MIG welds

This Part Fits:

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99355HM. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Compact, lightweight construction enables installation in confined areas, welding is required
• Compact/Lightweight Construction Enables Installation In Confined Areas/Welding Is Required
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Durable 308 stainless steel MIG welds

This Part Fits:

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99354HM. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Compact, lightweight construction enables installation in confined areas, welding is required
• Compact/Lightweight Construction Enables Installation In Confined Areas/Welding Is Required
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Durable 308 stainless steel MIG welds

This Part Fits:

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99209HM. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Compact, lightweight construction enables installation in confined areas, welding is required
• Compact/Lightweight Construction Enables Installation In Confined Areas/Welding Is Required
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Durable 308 stainless steel MIG welds

This Part Fits:

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99206HM. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Compact, lightweight construction enables installation in confined areas, welding is required
• Compact/Lightweight Construction Enables Installation In Confined Areas/Welding Is Required
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Durable 308 stainless steel MIG welds

This Part Fits:

MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94109 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Compact, lightweight construction enables installation in confined areas, welding is required
• Compact/Lightweight Construction Enables Installation In Confined Areas/Welding Is Required
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Durable 308 stainless steel MIG welds

This Part Fits:

MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94106 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Compact, lightweight construction enables installation in confined areas, welding is required
• Compact/Lightweight Construction Enables Installation In Confined Areas/Welding Is Required
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Durable 308 stainless steel MIG welds

This Part Fits:

MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 94056 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Compact, lightweight construction enables installation in confined areas, welding is required
• Compact/Lightweight Construction Enables Installation In Confined Areas/Welding Is Required
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Durable 308 stainless steel MIG welds

MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 94039 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
• High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
• Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
• Compact, lightweight construction enables installation in confined areas, welding is required
• Compact/Lightweight Construction Enables Installation In Confined Areas/Welding Is Required
• Your Trusted Source For EPA-Compliant Catalytic Converters
• Durable 308 stainless steel MIG welds