The Turbosmart WG45 Outlet Weld Flange is a precision-machined component engineered for fabricators building custom exhaust or manifold systems. Specifically designed to match the outlet side of the Turbosmart HyperGate45 (45mm) external wastegate, this flange ensures exact alignment and a secure, leak-free connection for optimal boost control.

• Precision machined from high-quality steel for superior weldability and heat resistance.
• Engineered specifically for the Turbosmart HyperGate45 45mm External Wastegate series.
• Facilitates a reliable mounting point for custom turbocharger setups.
• Provides a true mating surface for the wastegate outlet to maximize exhaust flow efficiency.
• Manufacturer Part Number: TS-0504-3002

The Turbosmart WG45 Inlet Weld Flange provides a precision-machined mounting interface for HyperGate45 (45mm) external wastegates. Engineered for custom fabrication, this steel flange allows for the secure installation of a 45mm wastegate onto exhaust manifolds or headers.

Constructed from high-grade steel, the flange is designed to withstand the extreme thermal cycling of forced induction systems while maintaining a flat mating surface for a leak-free seal. Its precise tolerances ensure perfect alignment with the HyperGate45 series, making it a critical component for reliable boost control and engine efficiency.

• Specifically designed for Turbosmart HyperGate45 (45mm) External Wastegates
• Precision machined from high-quality steel for optimal weldability
• Provides a secure, leak-free mating surface
• Durable construction for high-heat exhaust environments
• Manufacturer Part Number: TS-0504-3001

This Turbosmart WG60 Alloy Outlet Weld Flange is designed for high-performance fabrication, allowing for a secure and leak-free connection between your wastegate and the exhaust dump pipe. Precision-machined to ensure a flat mating surface, this flange is essential for custom turbocharger setups utilizing the Power-Gate60 series.

Constructed from high-grade alloy to withstand the extreme thermal stresses of turbocharged exhaust systems, this weld-on component provides the durability required for both street and track applications. It is a direct fit for the outlet side of the WG60 wastegate, ensuring proper alignment and gas flow.

• Compatible with Turbosmart WG60 Power-Gate60 External Wastegates
• Precision-machined alloy construction for optimal sealing
• Designed for weld-on installation to custom dump pipes
• High-temperature resistance for reliable performance
• Manufacturer Part Number: TS-0503-3008

The Turbosmart WG60 Outlet V-Band is a heavy-duty replacement component engineered specifically for the Gen4 Power-Gate60 external wastegate range. This clamp is designed to secure the discharge pipe to the wastegate body, ensuring a leak-free seal capable of withstanding extreme exhaust temperatures and high-vibration environments.

Built with robust cast construction, this V-band assembly provides consistent clamping pressure across the flange surface. The included fine-thread bolt and nut allow for precise torque application, preventing hardware from backing out during heat cycling. This is a direct replacement part for the outlet side of the WG60 wastegate.

• Fits Turbosmart Gen4 WG60 (Power-Gate60) external wastegates
• High-strength cast construction for durability
• Complete with fine-thread bolt and nut hardware
• Specifically designed for the outlet (discharge) flange
• Manufacturer Part Number: TS-0503-3005

The Turbosmart WG60 Inlet V-Band Clamp is a heavy-duty replacement component designed specifically for the inlet side of the Gen4 60mm external wastegate range. This clamp is engineered to maintain a precise, leak-free seal between the exhaust manifold flange and the wastegate body, ensuring consistent boost pressure and exhaust system integrity.

• Compatible with Turbosmart Gen4 WG60 (60mm) external wastegates
• Durable cast construction designed to withstand extreme thermal cycles
• Features fine-thread bolt and nut for accurate torque application and secure retention
• Essential for new installations or replacing worn manifold-to-wastegate clamps
• Manufacturer Part Number: TS-0503-3004

Ensure your external wastegate maintains a consistent, high-pressure seal with this genuine Turbosmart replacement valve seat. Specifically engineered for the Power-Gate 60 (WG60) series, this component provides the critical mating surface required to prevent exhaust leaks and ensure precise boost management.

Over time, extreme heat cycles and carbon buildup in the exhaust stream can wear down the contact surface of the valve seat. This precision-machined replacement restores your wastegate to its original factory specifications, preventing boost creep and ensuring the valve closes fully when required.

• Fits Turbosmart Power-Gate 60 (WG60) 60mm External Wastegates
• Precision-machined for a gas-tight, reliable seal
• Durable construction designed to withstand extreme exhaust temperatures
• Direct replacement for worn or damaged original seats
• Manufacturer Part Number: TS-0503-3003

The Turbosmart WG60 Outlet Weld Flange is a precision-engineered component designed for the discharge side of the Power-Gate60 external wastegate. This weld-on flange is essential for custom exhaust fabrication, providing a secure and leak-free mounting point for screamer pipes or recirculated exhaust plumbing. Built to withstand the extreme thermal loads found in high-performance turbocharged applications, it ensures the wastegate remains properly seated and functional.

• Designed specifically for Turbosmart WG60 Power-Gate60 60mm external wastegates
• Engineered for the wastegate outlet/discharge port
• Precision-machined for accurate fitment and easier welding
• Ideal for custom turbo manifolds and dump pipe fabrication
• Manufacturer Part Number: TS-0503-3002

The Turbosmart WG60 Inlet Weld Flange is a precision-engineered component designed for custom exhaust manifold fabrication and wastegate runner construction. This flange provides the critical interface for mounting a Turbosmart Power-Gate 60 (WG60) external wastegate, ensuring a stable and leak-free seal capable of withstanding extreme exhaust temperatures.

Each flange is machined to exacting tolerances at Turbosmart’s Sydney, Australia facility. By utilizing a design that matches the specific V-band profile of the WG60 series, it allows for secure attachment and simplified removal of the wastegate unit during maintenance or manifold adjustments.

• Application: Specifically designed for Turbosmart WG60 (Power-Gate 60) External Wastegates
• Purpose: Facilitates custom fabrication of exhaust manifolds and wastegate dump pipes
• Origin: Designed and manufactured in Australia
• Manufacturer Part Number: TS-0503-3001

The Turbosmart WG50 Outlet V-Band is a precision-engineered replacement component for the Gen4 external wastegate range. Specifically designed to secure the outlet flange of the ProGate50 (WG50), this clamp provides the high-clamping force necessary to maintain a leak-free seal between the wastegate and the exhaust dump pipe under extreme thermal stress and vibration.

• Replacement outlet V-band for Turbosmart Gen4 WG50 External Wastegates
• Heavy-duty cast construction for maximum durability and heat resistance
• Equipped with a fine-thread bolt and nut for precise torque and secure fastening
• Ensures reliable wastegate-to-exhaust connection
• Manufacturer Part Number: TS-0502-3005

This genuine Turbosmart Gen4 WG50 Inlet V-Band Clamp is a dedicated replacement component designed for the Gen4 Pro-Gate50 external wastegate series. It provides the high-tension clamping force required to maintain a gas-tight seal between the wastegate housing and the exhaust manifold flange, ensuring consistent boost pressure and preventing dangerous exhaust leaks.

• Specific fitment for Turbosmart Gen4 WG50 (Pro-Gate50) external wastegates
• Heavy-duty cast construction for superior thermal stability in high-heat environments
• Features a fine-thread bolt and nut for precise torque and secure fastening
• Engineered for the inlet side of the wastegate assembly
• Manufacturer Part Number: TS-0502-3004

The Turbosmart Gen4 WG50 Valve Seat is a precision-engineered replacement component for ProGate50 50mm external wastegates. As the critical sealing interface between the valve and the wastegate body, this valve seat ensures a positive seal when closed, preventing exhaust bypass leaks and maintaining accurate boost control under high pressure.

Built to withstand extreme exhaust gas temperatures, this seat is designed to replace worn or heat-pitted factory seats to restore response and consistency to your turbocharger system. It provides the tight tolerances required for high-boost applications, ensuring your wastegate performs according to its specified spring or controller settings.

• Fits Turbosmart ProGate50 (50mm) Gen4 External Wastegates
• Maintains critical sealing surface for consistent boost response
• Precision-machined for high-temperature durability and fitment
• Genuine Turbosmart Gen4 series replacement part
• Manufacturer Part Number: TS-0502-3003

Constructed for custom turbocharger fabrication, the Turbosmart WG50 Outlet Weld Flange provides a precision-machined mounting point for the discharge side of your wastegate. This flange is specifically engineered to mate with Turbosmart ProGate50 (50mm) external wastegates, ensuring a reliable, leak-free seal under extreme exhaust temperatures.

The flange is machined from high-grade stainless steel to resist warping and corrosion in high-heat environments. Its contoured inner surface is designed to minimize turbulence and maintain maximum flow efficiency for precise boost control. Whether you are building a custom manifold or rerouting a screamer pipe, this flange offers the structural integrity required for professional-grade forced induction setups.

• Fits Turbosmart ProGate50 (50mm) External Wastegates
• Precision-machined from high-grade stainless steel
• Contoured bore for optimized exhaust flow
• Designed for the wastegate outlet/discharge side
• Includes necessary mounting hardware
• Manufacturer Part Number: TS-0502-3002

The Turbosmart WG50 Inlet Weld Flange (TS-0502-3001) provides a precise mounting solution for custom turbocharger fabrication. Specifically engineered for use with Turbosmart ProGate50 (50mm) series external wastegates, this flange is a critical component for building reliable exhaust manifolds and crossover pipes.

Precision-machined from high-grade stainless steel, this flange offers excellent weldability and thermal stability under high-heat exhaust conditions. The internal geometry features a smooth, contoured surface designed to maximize flow efficiency into the wastegate, preventing turbulence and ensuring accurate boost control. This flange is designed to be welded directly to your custom manifold or exhaust plumbing to ensure a secure, leak-free seat for the wastegate.

• Compatible with Turbosmart ProGate50 (50mm) External Wastegates
• Material: High-grade stainless steel for superior heat resistance and durability
• Design: Precision-machined with a contoured inner bore for optimized flow
• Application: Ideal for custom turbocharger manifold and header fabrication
• Manufacturer Part Number: TS-0502-3001

Turbosmart UltraGate38 Stainless Steel Weld Flanges provide a precise, high-integrity mounting solution for custom turbo manifold fabrication and external wastegate dump pipes. Engineered specifically for the 38mm UltraGate38 series, these flanges are constructed from high-grade stainless steel to withstand the extreme thermal cycling and exhaust pressures common in high-performance forced induction systems.

These flanges feature the industry-standard 71mm bolt spacing, ensuring a secure and leak-free connection when paired with Turbosmart hardware and gaskets. They are essential components for fabricators building bespoke exhaust systems who require a reliable interface for their wastegate setup.

• Compatible with Turbosmart UltraGate38 38mm external wastegates
• Material: Durable stainless steel for superior heat and corrosion resistance
• Bolt Spacing: 71mm (2.80 in)
• Application: Custom manifold and dump pipe fabrication
• Manufacturer Part Number: TS-0501-2001

The Turbosmart Power Port Alloy Weld Flange (TS-0207-3001) is engineered for fabricators and tuners installing a Power Port series blow-off valve onto custom aluminum charge piping. This precision-machined flange provides a stable, leak-free mounting surface capable of withstanding the extreme pressures and thermal loads of high-boost applications.

Constructed from high-grade weldable alloy, this component ensures excellent weld penetration and structural integrity, making it an essential piece for any custom intercooler or intake tract project requiring the high-flow performance of a Power Port BOV.

• Designed specifically for Turbosmart Power Port series Blow-Off Valves
• Precision-machined from high-quality weldable alloy (aluminum)
• Ideal for custom fabrication on aluminum charge pipes and intercooler end tanks
• Ensures a secure, leak-free seal for forced induction systems
• Manufacturer Part Number: TS-0207-3001

The Turbosmart BOV V-Band Clamp Assembly provides a reliable, leak-free connection between your blow-off valve and the intercooler or turbocharger piping. Designed for durability and ease of maintenance, this hardware ensures the BOV remains securely seated even under high-boost conditions, preventing boost leaks that can compromise engine performance.

Constructed from high-grade stainless steel, this assembly is built to withstand extreme thermal cycles and resist corrosion in the demanding environment of the engine bay. The V-band design allows for a quick-release connection, making it simple to remove the BOV for inspection or maintenance without the need for complex tools.

• Compatible with Turbosmart Plumb Back, Dual Port, Supersonic, and Vee Port Pro BOV models
• High-grade stainless steel construction for maximum durability and corrosion resistance
• Precision-engineered for a secure, high-pressure seal
• Simplifies installation and removal of the blow-off valve
• Manufacturer Part Number: TS-0205-3009

The Turbosmart Kompact Plumb Back is a high-performance 38mm recirculating blow off valve designed to replace restrictive factory valves with a durable, leak-free solution. Constructed from billet aluminum alloy, this valve is engineered to handle increased boost levels while maintaining a quiet, stealthy operation by recirculating all excess pressure back into the intake system.

By returning air to the intake, the Plumb Back design prevents the rich-run conditions and stalling often associated with atmospheric venting on vehicles equipped with sensitive airflow meters (MAF). It offers a significant upgrade in both response and reliability over plastic OEM components that often leak or fail under high pressure.

• Precision-machined billet aluminum alloy construction
• Large 38mm internal bore for high-flow capacity
• Plumb Back design for 100% recirculation and quiet performance
• Compatible with universal 38mm hose-on or weld-on applications
• Manufacturer Part Number: TS-0205-3008

The Turbosmart BOV Flange Adapter (TS-0205-2061) provides a precision-engineered solution for mounting Turbosmart universal blow-off valves onto existing HKS-style flanges. This adapter eliminates the need for custom fabrication or welding when upgrading your forced induction system, ensuring a snug, leak-free fit between the valve and the mounting point to maintain consistent boost pressure.

Designed for reliability under high-boost conditions, this adapter ensures the integrity of your charge pipe connections, allowing for the fast response times and precise boost control required in performance applications.

• Manufacturer Part Number: TS-0205-2061
• Compatible BOV Models: Turbosmart Plumb Back, Dual Port, Vee Port Pro, and Supersonic Universal BOVs
• Mounting Interface: Adapts to HKS-style blow-off valve flanges
• Performance: Precision machined to prevent air and pressure leaks for optimal seal integrity

The Turbosmart BOV flange adapter (MPN: TS-0205-2060) provides a precision-engineered mounting solution for enthusiasts looking to install a Turbosmart blow-off valve onto charge piping already flanged for GReddy-style valves. This adapter eliminates the need for cutting or welding, allowing for a clean, bolt-on upgrade to your vehicle's forced induction system.

Designed for a secure, airtight seal, this adapter ensures maximum boost response and reliability. It is specifically compatible with the universal versions of Turbosmart's most popular bypass valves, making it an essential component for simplifying your BOV configuration.

• Adapts universal Turbosmart BOVs to GReddy-style mounting flanges
• Compatible with Turbosmart Vee Port Pro, Plumb Back, Dual Port, and Supersonic Universal models
• Precision-machined construction for high-pressure durability
• Direct bolt-on fitment to existing GReddy-pattern flanges
• Manufacturer Part Number: TS-0205-2060

The Turbosmart 38mm V-Band Blanking Plate provides a reliable, leak-free solution for sealing off a blow-off valve (BOV) port. This component is essential for diagnostic testing or for vehicles transitioning to a different forced induction configuration where the original BOV mounting point is no longer required. By using a dedicated blanking plate, you ensure the intake tract remains pressurized without the risk of boost leaks or contamination.

Precision-engineered to fit Turbosmart 38mm V-band mounting systems, this plate interfaces directly with 38mm weld-on straight adapters, profiled adapters, and 38mm hose adapter fittings. The plate maintains a positive seal under high boost pressures, utilizing the same robust V-band architecture as Turbosmart's performance valves.

• Fits Turbosmart 38mm weld-on and hose adapter fittings
• Designed for temporary or permanent BOV port removal
• Maintains system pressure integrity during testing or bypass
• Precision-machined from high-grade materials for heat and pressure resistance
• Manufacturer Part Number: TS-0205-2011

The Turbosmart 38mm Stainless Steel Profiled Weld-On Adapter (TS-0205-2003) is engineered for custom intercooler piping setups requiring a secure, leak-free mounting point for universal blow-off valves. This adapter features a pre-profiled curved base designed to match the radius of standard round intercooler plumbing, ensuring a more precise seat and simplified fitment during the welding process.

• Fabricated from high-grade stainless steel for superior heat resistance and structural integrity in high-boost applications.
• 38mm bore diameter compatible with a wide range of universal Turbosmart valves.
• Pre-contoured profile reduces prep time when welding to rounded charge pipes.
• Compatibility: Engineered to fit Turbosmart Plumb Back, Dual Port, Vee Port Pro, and Supersonic Universal Fit BOVs.
• Installation Note: This component requires welding for proper attachment.
• Manufacturer Part Number: TS-0205-2003

The Turbosmart 38mm Alloy Profiled Weld Flange (TS-0205-2002) is a precision-engineered mounting solution designed for seamless Blow-Off Valve integration. Featuring a curved radius profile, this adapter is specifically shaped to sit flush against round intercooler plumbing, simplifying the fabrication process and ensuring a structurally sound weld.

• Precision Fitment: Engineered specifically for Turbosmart Plumb Back, Dual Port, Vee Port Pro, and Supersonic BOVs.
• Curved Profile: Radius base fits round intake and intercooler piping for easier welding and a professional finish.
• Durable Construction: Manufactured from high-quality alloy to withstand high boost pressures and engine bay heat cycles.
• System Integrity: Provides an effective airtight seal between the BOV and the intake tract to maintain consistent boost pressure and airflow.
• Installation: Weld-on design required for custom or universal intercooler setups.
• MPN: TS-0205-2002

Ensure a leak-free seal for your high-performance blow off valve with the Turbosmart RacePort and Big Bubba Flange O-Ring. This replacement seal is engineered specifically for the flange dimensions of Turbosmart's larger BOV units, providing a critical barrier against boost leaks that can lead to power loss and inconsistent turbocharger behavior.

Constructed from high-grade elastomers, this O-ring is built to withstand the extreme temperature cycles and high pressures common in forced induction engine bays. Whether performing routine maintenance or reinstalling your BOV after a teardown, using a fresh seal ensures your system maintains maximum boost pressure and peak efficiency.

• Direct replacement for Turbosmart RacePort and Big Bubba blow off valve flanges
• Engineered to resist high heat and pressure without degrading
• Prevents boost leaks at the mounting point for consistent performance
• Precision-molded for exact fitment and easy installation
• Manufacturer Part Number: TS-0204-3005

The Turbosmart RacePort and Big Bubba V-Band Clamp (TS-0204-3004) provides a high-integrity connection between the blow-off valve and the compressor housing or intake piping. Engineered to withstand extreme boost pressures, this clamp is a direct replacement for the hardware used to secure Turbosmart's high-flow BOV series, ensuring a leak-free seal that prevents pressure loss and maintains consistent turbocharger performance.

Constructed for maximum durability and resistance to heat-cycling, the V-band design provides uniform clamping force around the entire flange circumference. This mechanical engagement is essential for high-performance forced induction systems where secure component retention is critical during rapid throttle transitions and maximum boost loads.

• Direct replacement for Turbosmart RacePort and Big Bubba Blow Off Valves
• Provides a secure, leak-free seal under high boost conditions
• V-band design for uniform pressure and easy installation/removal
• Engineered for high-strength and long-term durability
• Manufacturer Part Number: TS-0204-3004

Securely mount your high-flow blow-off valve with the Turbosmart Alloy Weld Flange. Specifically engineered for use with the Turbosmart RacePort and Big Bubba series, this flange provides a stable, leak-free mounting point for custom forced induction setups. It is designed to be welded directly onto aluminum intercooler or intake piping, ensuring your BOV remains seated even under high boost pressures.

• Compatible with Turbosmart RacePort and Big Bubba series blow-off valves
• Manufactured from high-grade weldable aluminum alloy
• Precision machined for a perfect seal and fitment
• Ideal for custom turbocharger and supercharger intake plumbing
• Manufacturer Part Number: TS-0204-3001

The Turbosmart RacePort BOV Flange Blank provides a secure, leak-free solution for sealing unused or redundant blow-off valve mounting points. Designed specifically for the high-flow RacePort series, this block-off plate is an essential component when reconfiguring your forced induction system or temporarily removing the BOV for testing or maintenance.

• Precision CNC machined for a perfect seal on RacePort-style flanges
• Engineered to withstand high boost pressures without leaking
• Compatible with all standard Turbosmart RacePort mounting hardware
• Manufacturer Part Number: TS-0204-2006

Whether you are simplifying your charge pipe plumbing or prepping a manifold for a different setup, this blanking plate ensures your induction system remains airtight and maintains consistent pressure.

This Turbosmart stainless steel weld flange provides a robust, leak-free mounting solution for custom forced induction systems. Specifically engineered to accommodate Turbosmart RacePort and Big Bubba series blow-off valves, this flange is a critical component for fabricators building high-performance intake tracts that utilize stainless steel piping.

Constructed from high-grade stainless steel, this weld-on adapter ensures a secure interface capable of withstanding extreme boost pressures without the risk of flange distortion or fatigue. It is designed to be welded directly onto stainless intercooler or charge piping, offering a professional-grade attachment point for your BOV.

• Compatible with: Turbosmart RacePort and Big Bubba Series Blow-Off Valves
• Material: High-quality stainless steel (S/S)
• Mounting Style: Weld-on application
• Application: Custom intake and intercooler piping
• Manufacturer Part Number: TS-0204-2001

Ensure efficient oil return and prevent drainage-related seal issues with the Torque Solution Port Matched -10AN Oil Drain Flange. This precision-machined component is designed for T3, T4, and T6 small to mid-frame turbochargers, providing a secure and leak-free connection for your lubrication system.

Unlike generic cast flanges, this port-matched version features an internal bore shaped to match the turbo's discharge, minimizing turbulence and preventing oil backup that can lead to smoking or premature turbo wear. The integrated -10AN male flare allows for direct plumbing of braided stainless steel or PTFE return lines.

• Compatible with T3, T4, and T6 small/mid-frame turbochargers
• -10AN male flare fitting for secure plumbing
• Port-matched internal diameter for optimized oil flow
• Precision CNC machined for a perfect gasket surface
• Manufacturer Part Number: TS-UNI-628

The Torque Solution Extended Port Matched Oil Drain Flange provides a reliable, leak-free return path for your turbocharger's lubrication system. Specifically engineered for T3, T4, Precision Turbo (PTE), and Turbonetics housings, this flange features an extended neck design. This added length simplifies installation by providing necessary clearance for -10AN fittings and hose ends, especially in tight engine bays where standard flanges might cause interference.

• Precision port-matched internal bore for optimal oil flow and drainage.
• Extended neck design for improved fitting and tool clearance.
• Integrated -10AN male flare fitting for secure plumbing.
• Compatible with T3, T4, PTE, and Turbonetics turbocharger housings.
• Manufacturer Part Number: TS-UNI-588.

The Torque Solution Oil Drain Flange is engineered to provide a secure and leak-free return path for turbocharger lubrication systems. Featuring a -10AN fitting, this flange is designed for high-flow oil scavenging, which is essential for maintaining turbo seal integrity and preventing oil backup. It bolts directly to the oil discharge port, offering a significant upgrade over standard or restrictive factory drains.

• Fitting Type: -10AN
• Compatibility: Garrett GT series, Garrett GTX series, and BorgWarner EFR series turbochargers
• Function: Turbocharger oil drain/return flange
• Manufacturer Part Number: TS-UNI-554