Fits the Nissan GT-R equipped with the RB26DETT engine.

This Turbosmart Internal Twin Port Wastegate (IWG) kit provides superior boost control compared to traditional single-port actuators. By utilizing a twin-port design, this kit allows for pressure manipulation on both sides of the diaphragm, enabling a wider boost range and more precise mapping. This is particularly effective for high-performance RB26DETT builds where maintaining stable boost at high RPMs or achieving a low minimum boost level is required.

Built for durability in high-heat environments, these actuators feature a silicone diaphragm with Nomex reinforcement and high-grade stainless steel hardware. The 14 PSI base spring pressure ensures a solid foundation for tuned twin-turbo setups, providing the response and reliability needed for the iconic Nissan GT-R platform.

• Manufacturer Part Number: TS-0615-6142
• Pressure Rating: 14 PSI (base spring)
• Design: Twin port for advanced boost manipulation
• Diaphragm: Heat-resistant reinforced silicone
• Material: High-grade billet aluminum construction
• Compatibility: Specific to Nissan RB26DETT twin-turbo systems
• Includes: Pair of actuators and mounting hardware

Fits 2011-2017 Nissan Juke S, SL, SV, Nismo, and Nismo RS models equipped with the 1.6L / 1.6T turbocharged engine.

The Turbosmart IWG-75 Internal Wastegate Actuator (TS-0615-3142) is engineered as a direct-fit replacement for the factory "tin can" actuator. By providing a more stable platform for boost control, the IWG-75 eliminates boost flutter and reduces the common drop-off seen at higher RPMs. This results in a broader powerband and faster turbo spooling by keeping the wastegate flapper closed until the precise target pressure is reached.

• Pre-loaded with a 14 PSI internal spring for high-performance applications.
• Direct bolt-on replacement for the standard Nissan 1.6T wastegate actuator.
• Precision-machined construction for superior durability and heat resistance over OEM components.
• Provides more consistent manifold pressure and improved boost response.
• Manufacturer Part Number: TS-0615-3142

Fits GM LTG engines (2.0L).

The Turbosmart IWG75 Internal Wastegate Actuator is a performance-engineered replacement for the factory actuator on GM 2.0L LTG turbocharged engines. By utilizing a 14 PSI spring and high-grade internal components, this unit prevents the wastegate flapper from blowing open under high exhaust pressure. This ensures more stable boost control, faster turbo spool-up, and a flatter boost curve compared to the standard OEM actuator.

• Specifically designed for the GM LTG engine platform
• Pre-fitted with a 14 PSI internal spring for reliable boost management
• Direct-fit design replaces the factory actuator on the stock turbocharger
• Precision-machined body with a durable black anodized finish
• Eliminates boost creep and improves overall throttle response
• Manufacturer Part Number: TS-0612-1142

Fits GM LTG 2.0L turbocharged engines.

The Turbosmart IWG75 Internal Wastegate Actuator is a performance-oriented upgrade designed to provide more stable boost control and improved turbocharger response. Factory actuators often utilize weak springs that can blow open prematurely under load; this 7 PSI unit ensures the wastegate remains closed until the target boost is achieved, resulting in faster spool-up and a more consistent boost curve across the RPM range.

• CNC-machined billet aluminum construction with a durable black anodized finish
• Stainless steel actuator rod and locking nuts for superior corrosion resistance
• High-temperature silicone diaphragm with Nomex reinforcement for long-term reliability
• Fixed 7 PSI base spring pressure for predictable boost management
• Direct replacement for the factory internal actuator
• Manufacturer Part Number: TS-0612-1072

Fits 2003 Mazda Protege Mazdaspeed.

The Turbosmart IWG75 internal wastegate actuator is engineered to provide maximum boost response for factory-frame turbochargers. By utilizing an increased working ratio over OE equipment, this actuator improves boost stability and response throughout the entire RPM range, preventing the wastegate from blowing open prematurely under high exhaust backpressure.

Constructed from high-grade billet aluminum and featuring Turbosmart’s unique locking collar system, this unit allows for quick spring changes (3psi to 26psi options available). The internal components include a proprietary Silicone Nomex diaphragm for high-temperature durability and stainless steel rods and clevis for corrosion resistance.

• Manufacturer Part Number: TS-0610-2072
• Base Spring Pressure: 7 PSI
• Material: Billet Aluminum
• Diaphragm: Silicone Nomex
• Hardware: Stainless Steel rods and clevis
• Finish: Black Anodized

Fits 2004-2007 Subaru Forester XT (XT, XT Limited, and XT Premium).

The Turbosmart IWG75 Internal Wastegate Actuator is engineered to provide maximum boost response for factory-frame turbochargers. By increasing the "Working Ratio" over standard equipment, the IWG75 series delivers improved boost stability and response throughout the entire RPM range. This 7 PSI black actuator is a precision-engineered upgrade that replaces the factory unit to provide consistent performance and superior control under high-heat conditions.

• High-grade billet aluminum construction with a black finish
• Preset to 7 PSI (optional springs available from 3psi to 26psi)
• Proprietary Silicon Nomex diaphragm for high-temperature durability
• Stainless steel rods and clevis for maximum corrosion resistance
• Turbosmart unique locking collar system for rapid cap and spring changes
• Manufacturer Part Number: TS-0605-5072

Fits select 2012-2013 Subaru Forester XT and 2015-2021 Subaru WRX models.

The Turbosmart IWG75 Internal Wastegate Actuator is designed to provide superior boost control and response for factory-frame turbochargers. By increasing the working ratio over the original equipment, this actuator minimizes boost drop-off at high RPMs and allows for more stable management of the wastegate flapper. Built to handle the heat and vibration of high-performance environments, it serves as a direct bolt-on replacement for the stock actuator.

• Billet aluminum construction with a black anodized finish
• Proprietary Silicon Nomex diaphragm for high-temperature resistance
• Stainless steel rods and clevis for corrosion resistance and longevity
• Unique locking collar system for easy spring changes
• Pre-configured with a 7 PSI spring rating
• Manufacturer Part Number: TS-0605-3072

Fits 2004-2016 Subaru Impreza WRX and WRX STI.

The Turbosmart IWG75 series internal wastegate actuator is engineered to provide superior boost response and stability for factory-frame turbochargers. By utilizing an increased working ratio over factory equipment, the IWG75 improves boost curve performance throughout the entire RPM range. This unit is built to handle high-heat environments while maintaining precise wastegate positioning, preventing premature gate opening and boost drop-off.

• High-grade billet aluminum construction with black finish
• Pre-installed 7 PSI spring (compatible with optional springs from 3psi to 26psi)
• Proprietary Silicone Nomex reinforced diaphragm for extreme thermal resistance
• Corrosion-resistant stainless steel rods and clevis
• Turbosmart unique locking collar system for rapid internal maintenance and spring changes
• Manufacturer Part Number: TS-0605-1072

Fits Mini Cooper S R56.

The Turbosmart vIWG (Internal Wastegate Actuator) provides a critical performance upgrade for the Mini Cooper S R56, replacing the factory actuator with a more robust, precision-engineered unit. By utilizing a high-grade silicone diaphragm and billet aluminum construction, this actuator prevents the wastegate from blowing open under high boost, ensuring faster spool-up and more stable boost pressure across the entire powerband.

• Internal spring pressure rated at 6inHg
• CNC-machined from 6061 billet aluminum for superior heat resistance
• Stainless steel actuator rod and locking nuts for long-term corrosion resistance
• Specifically calibrated for the R56 chassis turbocharger
• Provides more consistent boost control compared to the OE stamped-steel unit
• Manufacturer Part Number: TS-0604-1155

Fits BMW N20 engines. Ensure stable boost control and improved turbocharger response with the Turbosmart vIWG Internal Wastegate Actuator. Designed specifically for the vacuum-actuated systems found on the N20 platform, this actuator replaces the weak factory unit which can often bleed boost or fail under high thermal loads.

Constructed from CNC-machined billet aluminum with stainless steel hardware, this vIWG unit offers superior heat resistance and durability compared to stamped OE components. It provides a more linear boost curve and prevents the wastegate from blowing open at high RPM, ensuring you hold target boost pressure across the entire powerband for more consistent performance.

• Base Spring Pressure: 6 inHg
• Construction: CNC-machined billet aluminum
• Hardware: High-grade stainless steel rods and fasteners
• Actuation Type: Vacuum-controlled internal wastegate (vIWG)
• Manufacturer Part Number: TS-0604-1067

The Turbosmart IWG75 Internal Wastegate Actuator (TS-0601-3242) is a direct-fit performance upgrade for the Mitsubishi EVO 10. Designed to provide more stable boost control than the factory unit, this actuator features a 24 PSI spring rating to ensure the wastegate flapper remains closed against high exhaust backpressure, resulting in a flatter boost curve and faster spool-up.

Constructed from high-grade billet aluminum with stainless steel hardware, the IWG75 is built to withstand extreme under-hood temperatures. Its reinforced silicone diaphragm provides consistent performance and longevity even in high-heat racing environments. This actuator is an essential component for EVO X owners looking to optimize boost management on stock or modified turbochargers.

• Direct bolt-on replacement for Mitsubishi EVO 10 turbochargers
• Internal spring pre-set to 24 PSI
• High-temperature reinforced silicone diaphragm for reliable operation
• CNC-machined billet aluminum construction with black anodized finish
• Includes stainless steel rods and locking nuts for corrosion resistance
• Part Number: TS-0601-3242

Fits 2008-2015 Mitsubishi Lancer Evolution X models including GSR, MR, MR Touring, SE, and Final Edition.

The Turbosmart IWG75 internal wastegate actuator is engineered to provide maximum boost response for your factory frame turbocharger. By utilizing an increased working ratio compared to the original equipment, this actuator improves boost stability and response throughout the entire RPM range. This 22 PSI (1.5 bar) black-finish model is ideal for high-performance applications where precise wastegate control is critical to maintaining peak power.

• High-grade billet aluminum construction for durability and heat resistance
• Proprietary Silicon Nomex diaphragm for high-temperature performance
• Stainless steel rods and clevis for corrosion resistance and strength
• Unique Turbosmart locking collar system for rapid spring changes and maintenance
• Direct bolt-on replacement for the OEM actuator
• Manufacturer Part Number: TS-0601-3222

Fits all 2008-2015 Mitsubishi Lancer Evolution models, including GSR, MR, MR Touring, SE, and Final Edition (EVO X).

The Turbosmart IWG75 Internal Wastegate Actuator is designed to provide the maximum possible boost response for factory-frame turbochargers. By increasing the effective working ratio over the original equipment, this actuator improves boost stability and response throughout the entire RPM range. Built for durability and precision, it replaces the often weak or inconsistent factory actuator with a high-grade billet unit that handles the heat and pressure of performance driving.

• Manufacturer Part Number: TS-0601-3182
• Pre-set to 18 PSI spring pressure
• Constructed from high-grade billet aluminum
• Features the Turbosmart unique locking collar system for rapid spring changes
• Proprietary Silicone Nomex reinforced diaphragm for high-temperature resistance
• Corrosion-resistant stainless steel rods and clevis

Fits select 2008-2015 Mitsubishi Lancer Evolution models, including GSR, MR, MR Touring, SE, and Final Edition.

The Turbosmart IWG75 Internal Wastegate Actuator is engineered to provide maximum boost response for your factory-frame Evo X turbocharger. By utilizing an increased working ratio compared to the original equipment, this actuator delivers improved boost control and faster response throughout the entire RPM range. This is an ideal solution for enthusiasts looking to stabilize boost pressure and eliminate the fatigue common in aging factory actuators.

• Manufacturer Part Number: TS-0601-3142
• Preset Spring Pressure: 14 PSI
• Construction: High-grade billet aluminum for superior heat resistance and durability
• Diaphragm: Proprietary silicone Nomex reinforced for high-temperature performance
• Hardware: Stainless steel rods and clevis for corrosion resistance
• Design: Features Turbosmart's unique locking collar system for easy spring changes

Fits 2005-2006 Mitsubishi Lancer Evolution models (including MR, RS, and SE).

The Turbosmart IWG75 Internal Wastegate Actuator (TS-0601-2222) is engineered to provide maximum boost response for factory-frame turbochargers. By utilizing an increased working ratio compared to original equipment, the IWG75 series delivers improved boost control and faster spooling throughout the entire RPM range.

This actuator is built for the rigors of high-performance use, featuring a high-grade billet aluminum housing, a proprietary Silicon Nomex diaphragm for heat resistance, and stainless steel rods and clevises for corrosion resistance. The unique locking collar system allows for secure assembly and simplified spring changes.

• Manufacturer Part Number: TS-0601-2222
• Preset Pressure: 22 PSI
• Material: High-grade billet aluminum construction
• Diaphragm: Proprietary Silicon Nomex
• Hardware: Stainless steel rods and clevis
• Adjustment: Unique Turbosmart locking collar system

Fits 2005-2006 Mitsubishi Lancer Evolution (including MR, RS, and SE submodels).

The Turbosmart IWG75 internal wastegate actuator is engineered to provide maximum boost response for factory-frame turbochargers. By utilizing an increased working ratio compared to original equipment, the IWG75 provides more stable boost control and faster spooling throughout the RPM range. This actuator is a direct replacement for the stock unit, designed to handle the increased heat and pressure demands of performance driving.

• Manufacturer Part Number: TS-0601-2182
• Pre-set to 18 PSI with a selection of optional springs available
• High-grade billet aluminum construction for durability and heat resistance
• Turbosmart unique locking collar system for rapid spring changes
• Proprietary Silicon Nomex diaphragm for high-temperature reliability
• Stainless steel rods and clevis for corrosion resistance

Fits 2005-2006 Mitsubishi Lancer Evolution, MR, RS, and SE (EVO 9).

The Turbosmart IWG75 Internal Wastegate Actuator (TS-0601-2142) is engineered to maximize boost response for factory-frame turbochargers. By offering a superior 'Working Ratio' compared to original equipment, the IWG75 ensures more stable boost control and faster spool-up throughout the RPM range. This actuator is the ideal solution for Mitsubishi owners looking to replace a worn OE unit or improve the reliability of their boost curve under high-load conditions.

• Pre-configured with a 14 PSI internal spring
• Constructed from high-grade billet aluminum for superior heat resistance and durability
• Features the Turbosmart unique locking collar system for rapid spring changes
• Proprietary Silicon Nomex diaphragm designed to withstand extreme engine bay temperatures
• Equipped with corrosion-resistant stainless steel rods and clevis
• Replaces factory internal wastegate actuator on stock-frame turbos

Fits 2003-2005 Mitsubishi Lancer Evolution, MR, and RS models.

The Turbosmart IWG75 Internal Wastegate Actuator is engineered to provide maximum boost response and stability for your factory-frame turbocharger. By increasing the "Working Ratio"—the effective surface area of the diaphragm versus the spring force—this upgraded actuator delivers more precise control and improved boost response throughout the entire RPM range compared to the stock equipment.

Constructed from high-grade billet aluminum and featuring Turbosmart’s unique locking collar system, the IWG75 is built for the rigors of high-performance driving. The internal components are designed for longevity and consistency, featuring a proprietary silicon Nomex diaphragm and stainless steel rods and clevis for superior heat and corrosion resistance.

• Manufacturer Part Number: TS-0601-1222
• Preset Pressure: 22 PSI
• Finish: Black Anodized
• Construction: High-grade billet aluminum
• Diaphragm: Proprietary Silicon Nomex material
• Hardware: Stainless steel rods and clevis
• Design: Unique Turbosmart locking collar system for easy spring changes

Fits 2003-2005 Mitsubishi Lancer Evolution, including MR and RS models.

The Turbosmart IWG75 Internal Wastegate Actuator is designed to provide significantly improved boost response and control compared to factory equipment. By increasing the working ratio between the diaphragm surface area and spring tension, this actuator ensures the wastegate flapper is held shut against exhaust gas pressure more effectively, resulting in faster spool-up and a flatter boost curve throughout the RPM range.

Built for durability in high-heat environments, the IWG75 features a high-grade billet aluminum housing and a proprietary silicone Nomex-reinforced diaphragm. The stainless steel rods and clevis provide superior corrosion resistance, while the unique locking collar system allows for quick spring changes if your boost requirements evolve. This unit comes pre-configured with an 18 PSI spring set for reliable high-performance applications.

• Manufacturer Part Number: TS-0601-1182
• Spring Rating: 18 PSI
• Finish: Black Anodized
• Construction: CNC Machined Billet Aluminum
• Diaphragm: High-temperature Silicone Nomex
• Hardware: Stainless steel rods and clevis
• Design: Turbosmart Unique Locking Collar System

Fits 2003-2005 Mitsubishi Lancer Evolution, including MR and RS submodels.

The Turbosmart IWG75 Internal Wastegate Actuator is engineered to provide maximum boost response for factory-frame turbochargers. By utilizing an increased working ratio over factory equipment, the IWG75 improves boost control and response across the entire RPM range. Built to withstand the rigors of high-performance use, this actuator replaces the stock unit with a durable, high-precision assembly designed for better stability under load.

• Manufacturer Part Number: TS-0601-1142
• Pressure Rating: 14 PSI
• Material: High-grade billet aluminum construction
• Diaphragm: Proprietary Silicone Nomex reinforced diaphragm for high-temperature durability
• Hardware: Corrosion-resistant stainless steel rods and clevis
• Assembly: Features Turbosmart's unique locking collar system for easy spring changes
• Finish: Black anodized for superior corrosion resistance

The Turbosmart IWG75 Internal Wastegate Clevis provides the critical mechanical link between the actuator rod and the turbocharger flapper arm. Precision-engineered for a secure fit, this component ensures consistent wastegate operation and accurate boost management under high-heat conditions.

As a genuine Turbosmart service part, it is designed for durability and reliable performance on IWG75 series actuators requiring a quarter-inch bore. It replaces worn or damaged clevises to restore the mechanical integrity of your turbocharging system's boost control hardware.

• Manufacturer Part Number: TS-0600-3004
• Bore Diameter: 6.3mm (.25in)
• Series Compatibility: Turbosmart IWG75 Internal Wastegate Actuators
• Function: Connects actuator rod to wastegate flapper arm

The Turbosmart IWG75 Internal Wastegate Clevis provides a secure, precise connection between the wastegate actuator rod and the turbocharger flapper arm. Engineered as a direct replacement component for Turbosmart IWG75 series actuators, this clevis ensures smooth mechanical operation and reliable boost management.

Constructed from high-strength materials to withstand the extreme heat and vibration of the engine bay, this 8mm (.31in) clevis replaces worn or damaged hardware that can lead to boost leaks or inconsistent actuator performance. It is a vital service part for maintaining the response and durability of your Turbosmart internal wastegate system.

• Compatible Series: Turbosmart IWG75 Actuators
• Clevis Bore: 8mm (.31in)
• Application: Internal Wastegate Actuator Linkage
• Manufacturer Part Number: TS-0600-3003

The Turbosmart IWG75 Internal Wastegate Clevis is a precision-engineered linkage component designed for the universal IWG75 actuator range. This clevis facilitates a secure, mechanical connection between the wastegate actuator rod and the turbocharger's wastegate flapper arm, ensuring consistent boost response and eliminating slack in the system.

Constructed to maintain tight tolerances under high-temperature conditions, this hardware is ideal for custom turbocharger configurations or as a direct replacement for worn-out clevis pins and rod ends that cause boost fluctuations.

• Manufacturer Part Number: TS-0600-3002
• Hole Diameter: 8.2mm (0.32in)
• Thread Specification: M6
• Compatibility: Specifically suits Turbosmart IWG75 Internal Wastegate Actuator series
• Design: Heavy-duty construction for reliable operation in high-heat environments

The Turbosmart IWG75 Internal Wastegate Clevis is a precision-machined replacement component designed for the Turbosmart IWG75 universal internal wastegate range. This clevis provides a critical linkage point between the actuator rod and the turbocharger's wastegate flapper arm, ensuring smooth operation and precise boost regulation.

Built to endure the high-heat environment of the exhaust housing, this clevis features a 6.3mm (.25in) bore to accommodate standard pivot pins and maintain a slop-free connection.

• Genuine Turbosmart IWG75 series component
• Bore Size: 6.3mm (0.25 inch)
• Application: Universal fitment for IWG75 actuators
• High-strength construction for thermal durability
• Manufacturer Part Number: TS-0600-3001

Maintain the precision and reliability of your boost control system with the Turbosmart Gen V IWG Swivel Joint Replacement (TS-0600-2005). This essential hardware component is designed specifically for Turbosmart’s Gen V series of Internal Wastegate Actuators, providing the necessary articulation between the actuator rod and the wastegate flapper arm.

Over time, swivel joints can wear or become fouled by road debris and extreme heat cycling, which can lead to mechanical binding or inconsistent boost pressure. This direct replacement part restores smooth movement and ensures your wastegate flapper operates without resistance, allowing for accurate and repeatable boost management.

• Genuine Turbosmart replacement component
• Engineered for Gen V Internal Wastegate (IWG) Actuators
• Restores smooth, bind-free flapper articulation
• Durable construction to withstand high-heat exhaust environments
• Manufacturer Part Number: TS-0600-2005

The Turbosmart IWG75 Single Port Diaphragm is a precision-engineered replacement component designed to restore the response and reliability of your internal wastegate actuator. Over time, internal diaphragms can become brittle or tear due to high-heat cycles and constant pressure fluctuations, leading to inconsistent boost control or boost leaks. This single-port diaphragm allows for a direct rebuild of the actuator housing to maintain factory-level performance.

• Direct replacement for Turbosmart IWG75 Single Port actuator ranges
• High-grade elastomer construction for thermal stability and pressure resistance
• Restores consistent boost control and actuator movement
• Manufacturer Part Number: TS-0600-2001

Note on Compatibility: This part is specifically for the standard Single Port IWG75. It is NOT compatible with Turbosmart IWG75 Twin Port or IWGHP (High Pressure) actuator models.

The Turbosmart MSG50 Modular StraightGate50 (TS-0565-1901) is a high-performance 50mm butterfly-style external wastegate engineered for Honda turbocharging systems where traditional poppet-style gates reach their flow limits. Unlike standard wastegates, the StraightGate50 utilizes a zero-turn flow path, providing massive exhaust gas bypass capacity and linear control in a compact, modular package.

Its modular design allows for multiple actuator orientations, making it an essential solution for tight engine bays and complex manifold geometries where flow priority is critical. Constructed from high-temperature stainless steel and precision-machined components, this gate ensures reliable boost management under extreme racing conditions.

• Manufacturer Part Number: TS-0565-1901
• Product Series: MSG50 Modular StraightGate50
• Bore Size: 50mm
• Valve Style: Zero-turn butterfly valve for maximum flow efficiency
• Actuation: Modular configuration for flexible clocking and installation
• Compatibility: Designed for Honda-specific turbo manifold applications

The Turbosmart PSG50 Pneumatic Straight Gate (TS-0565-1762) is a high-flow external wastegate designed to provide superior boost control through a unique butterfly-style valve architecture. Unlike traditional poppet-style wastegates, the Straight Gate design offers a more linear flow path, significantly increasing flow capacity and reducing turbulence in high-performance exhaust systems.

This pneumatic version is controlled via standard air pressure signals and comes pre-fitted with a 6psi spring, making it an ideal choice for lower boost thresholds or as a base for electronic boost controllers. The black finish provides a discrete, professional look in the engine bay while the robust construction ensures reliable operation under extreme thermal loads.

• Manufacturer Part Number: TS-0565-1762
• Series: PSG50 Pneumatic Straight Gate
• Spring Rating: 6psi
• Actuation: Pneumatic
• Finish: Black Anodized
• Design: High-flow butterfly valve

The Turbosmart PSG50V Pneumatic Straight Gate (Vacuum) represents a shift in boost control technology. Unlike traditional poppet-style wastegates, the PSG50V utilizes a butterfly-style valve to provide a linear, straight-through exhaust flow path. This design significantly increases flow capacity while maintaining precise control, making it an ideal choice for high-horsepower turbocharged applications where space and flow efficiency are critical.

This vacuum-actuated model is engineered for reliability in extreme environments, featuring high-temperature materials and a durable black anodized finish. The straight-gate configuration allows for a smaller footprint without sacrificing the flow characteristics of a much larger traditional gate. This unit comes pre-calibrated with a 6in Hg spring for precise vacuum-based actuation.

• Manufacturer Part Number: TS-0565-1212
• Valve Type: Straight Gate butterfly valve
• Actuation: Pneumatic Vacuum
• Spring Pressure: 6in Hg
• Finish: Black Anodized
• Compact design with superior flow-to-size ratio
• Linear control for predictable boost management

The Turbosmart Electronic StraightGate ESG50 (TS-0565-1002) is a high-flow butterfly-style external wastegate engineered for uncompromising boost control. Unlike traditional poppet-valve designs, the ESG50 features a zero-offset straight-through valve that allows for significantly higher flow capacity within a compact 50mm footprint, providing a more linear flow profile across the valve's entire range of motion.

This system is fully electronically actuated, eliminating the need for reference hoses, diaphragms, or springs. By removing pneumatic control from the equation, you eliminate issues like diaphragm failure or spring pressure limitations. The high-torque electronic actuator provides precise valve positioning and fast response times, allowing for complex boost strategies and stable performance regardless of exhaust backpressure.

• Manufacturer Part Number: TS-0565-1002
• Valve Diameter: 50mm high-flow butterfly valve
• Actuation Type: Full electronic control (no vacuum/boost lines required)
• Construction: High-temperature materials for extreme exhaust environments
• Control: High-resolution electronic positioning for closed-loop boost management