Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Welcome to Atlus Automotive
Main menu
-
Performance
- Performance
-
Intake & Exhaust
- Intake & Exhaust
- Air Intake Systems
- Cold Air Intakes
- Air Intake Components
- Air Filters
- Air Filters - Drop In
- Air Filters - Direct Fit
- Air Filters - Universal Fit
- Pre-Filters
- Recharge Kits
- OE Replacement Air Intake Components
- Exhaust, Mufflers & Tips
- Catback
- Axle Back
- Muffler
- Tips
- Headers & Manifolds
- Connecting Pipes
- Catalytic Converter Direct Fit
- Catalytic Converter Universal
- Exhaust Collector
- Merge Collectors
-
Engine Upgrades
- Engine Upgrades
- Engine Components
- Camshafts
- Valve Springs, Retainers
- Head Gaskets
- Head Stud & Bolt Kits
- Main Stud & Bolt Kits
- Gasket Kits
- Engine Mounts
- Oil Catch Cans
- Oil Separators
- Throttle Bodies
- Throttle Body Spacers
- Crankshaft Dampers
- Valves
- Piston Rings
- Piston Sets - Forged - 4cyl
- Piston Sets - Cast - 4cyl
- Connecting Rods - 4Cyl
- Rotating Assemblies
- Stroker Kits
-
Turbo & Cooling
-
Fuel, Ignition & Tuning
-
Suspension & Handling
- Suspension & Handling
-
Lowering & Coilovers
-
Arms, Links & Alignment
-
Lift & Off-Road Suspension
-
Chassis & Bracing
-
Wheels & Tires
- Wheels & Tires
-
Wheels
-
Tires
-
Drivetrain & Clutch
-
Brakes
- Brakes
-
Pads & Rotors
-
Brake Kits & Calipers
-
Lines, Fluid & Hardware
-
Exterior & Lighting
- Exterior & Lighting
-
Lighting
-
Exterior Styling
-
Bumpers & Protection
-
Interior & Electronics
- Interior & Electronics
-
Interior Upgrades
-
Gauges & Electronics
-
Audio & Safety
-
Overland & Utility
- Overland & Utility
-
Bed Covers & Bed Gear
-
Steps, Racks & Storage
-
Trail & Towing
-
Maintenance & Garage
- Maintenance & Garage
-
Oil, Fluids & Filters
-
Detailing & Car Care
-
Tools & Fabrication
Your cart
Choose your Location
-
Atlus
1340 Cobb Dr, Unit 1, Eustis, FL 32736
352-234-4458
Mon – Fri: 8:30 am – 4:30 pm
Sat: 9:00 am – 2:00 pm
Sun: Closed
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
1816 products
1816 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$1,695.00
The S55 suffers heavily from heat soak. Many tuners witnessed this early on after doing multiple dyno pulls and seeing significant drops in power after each consecutive pass. Many F8X owners experienced the same loss of power on the track as the engine just could not cool off during laps. The solution is two fold: The Charge-Air-Cooler (CSF #8082/8082R) & Front Mount Heat Exchanger (CSF #8075/8075V) work together to keep the intake temps down and power up. The factory units simply cannot dissipate enough heat to keep up with prolonged performance driving. CSF's Charge-Air-Cooler boasts a core size that is 60% larger, greatly increasing the capacity for heat transfer from the hot charge air coming from the turbos. Paired with the Front Mount Heat Exchanger the system is able to maintain lower intake temps and keep your BMW F8X's power up.
- Multiple Air Dividers Cast Into Both Hot/Cold Side Endtanks for Optimized Air Flow Through the Custom Designed CSF Liquid-to-Air Intercooler Core (CFD Analysis and Testing Completed to Ensure Optimal Performance)
- Left/Right, Cross-Flow, Dual-Pass Core Configuration with 2-Stage Water Cooling for Maximum Efficiency and Intake Temperature Reduction (vs. OEM Single-Pass Vertical-Flow Design)
- Finished with a Professional "Crinkle Black" Powder-Coated Finish (Available in Raw Aluminum with Option for Custom Powder-Coating - CSF #8082R)
- "Drop-in Fit" Design for an Easy & Quick Plug-and-Play Installation, Complete with OEM-Style "Quick-Connect" Water Connections and Sensor Ports
- World's 1st Cast Endtank Designed Top Mount Charge-Air-Cooler for the BMW S55 Engine in the BMW F80 M3, F82/F83 M4, and F87 M2 Competition
- Designed with 3D Scanning/Rapid Prototype Technology to Ensure Precise Fitment and Maximum Surface Area Utilization
- 60% Increase in Core Size Compared to the OEM Cooler
- Lifetime Warranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2021 | BMW | M2 | Competition |
| 2020 | BMW | M2 | CS |
| 2015-2018 | BMW | M3 | Base |
| 2015-2020 | BMW | M4 | Base |
| 2019-2020 | BMW | M4 | CS |
| 2016 | BMW | M4 | GTS |
$349.00
CSF Bar & Plate Intercooler Cores are used by some of the most renowned tuning and performance companies in the industry. This 24" x 12" x 3" Horizontal Flow Core is rated for 850 WHP and the perfect fit for your custom high-performance intercooler. Each CSF Intercooler core is pressure tested at 120psi for maximum reliability in extreme boost applications. Hand-Built using jigs & fixtures for a perfectly straight core in a clean room using gloves inside the CSF factory to ensure proper brazing and a clean surface for future welding. Featuring a multi-louvered high precision staggered fin design (for both ambient and pressure sides of the core) for the best heat transfer possible.
- Manufactured by Hand in a Clean Room Using Gloves Inside the CSF Cooling Factory to Ensure Proper Brazing and a Clean Surface for Future Welding
- Multi-Louvered High Precision Staggered Fin Design (for Both Ambient and Pressure Sides of the Core)
- Individually Boxed and Protected for Secure Transport Through Single Piece Mail Services
- Batch Brazed in CSF's State-of-the-Art Digital Vacuum Brazing Oven (12 Ovens in Total)
- Strict Quality Control and Quality Testing, Including Individual Pressure Testing
- Hand-Built Using Jigs & Fixtures for a Perfectly Straight Core for Easy Welding
- Pressure Tested at 120psi for Maximum Reliability in Extreme Boost Applications
- Dimensions: 24"x12"x3" (610mm x 300mm x 75mm)
- Heavy-Duty Bar & Plate Intercooler Cores
- HP Rating: 850
- Cross-flow
$309.00
CSF Bar & Plate Intercooler Cores are used by some of the most renowned tuning and performance companies in the industry. This 20" x 12" x 3" Horizontal Flow Core is rated for 700 WHP and the perfect fit for your custom high-performance intercooler. Each CSF Intercooler core is pressure tested at 120psi for maximum reliability in extreme boost applications. Hand-Built using jigs & fixtures for a perfectly straight core in a clean room using gloves inside the CSF factory to ensure proper brazing and a clean surface for future welding. Featuring a multi-louvered high precision staggered fin design (for both ambient and pressure sides of the core) for the best heat transfer possible.
- Manufactured by Hand in a Clean Room Using Gloves Inside the CSF Cooling Factory to Ensure Proper Brazing and a Clean Surface for Future Welding
- Multi-Louvered High Precision Staggered Fin Design (for Both Ambient and Pressure Sides of the Core)
- Individually Boxed and Protected for Secure Transport Through Single Piece Mail Services
- Batch Brazed in CSF's State-of-the-Art Digital Vacuum Brazing Oven (12 Ovens in Total)
- Strict Quality Control and Quality Testing, Including Individual Pressure Testing
- Hand-Built Using Jigs & Fixtures for a Perfectly Straight Core for Easy Welding
- Pressure Tested at 120psi for Maximum Reliability in Extreme Boost Applications
- Dimensions: 20"x12"x3" (505mm x 300mm x 75mm)
- Heavy-Duty Bar & Plate Intercooler Cores
- HP Rating: 700
- Cross-flow
$369.00
CSF Bar & Plate Intercooler Cores are used by some of the most renowned tuning and performance companies in the industry. This 18" x 12" x 4.5" Horizontal Flow Core is rated for 1000 WHP and the perfect fit for your custom high-performance intercooler. Each CSF Intercooler core is pressure tested at 120psi for maximum reliability in extreme boost applications. Hand-Built using jigs & fixtures for a perfectly straight core in a clean room using gloves inside the CSF factory to ensure proper brazing and a clean surface for future welding. Featuring a multi-louvered high precision staggered fin design (for both ambient and pressure sides of the core) for the best heat transfer possible.
- Manufactured by Hand in a Clean Room Using Gloves Inside the CSF Cooling Factory to Ensure Proper Brazing and a Clean Surface for Future Welding
- Multi-Louvered High Precision Staggered Fin Design (for Both Ambient and Pressure Sides of the Core)
- Individually Boxed and Protected for Secure Transport Through Single Piece Mail Services
- Batch Brazed in CSF's State-of-the-Art Digital Vacuum Brazing Oven (12 Ovens in Total)
- Strict Quality Control and Quality Testing, Including Individual Pressure Testing
- Hand-Built Using Jigs & Fixtures for a Perfectly Straight Core for Easy Welding
- Pressure Tested at 120psi for Maximum Reliability in Extreme Boost Applications
- Dimensions: 12"x12"x4.5" (455mm x 300mm x 115mm)
- Heavy-Duty Bar & Plate Intercooler Cores
- HP Rating: 1000
- Cross-flow
$469.00
CSF Bar & Plate Intercooler Cores are used by some of the most renowned tuning and performance companies in the industry. This 25" x 12" x 4.5" Horizontal Flow Core is rated for 1200 WHP and the perfect fit for your custom high-performance intercooler. Each CSF Intercooler core is pressure tested at 120psi for maximum reliability in extreme boost applications. Hand-Built using jigs & fixtures for a perfectly straight core in a clean room using gloves inside the CSF factory to ensure proper brazing and a clean surface for future welding. Featuring a multi-louvered high precision staggered fin design (for both ambient and pressure sides of the core) for the best heat transfer possible.
- Manufactured by Hand in a Clean Room Using Gloves Inside the CSF Cooling Factory to Ensure Proper Brazing and a Clean Surface for Future Welding
- Multi-Louvered High Precision Staggered Fin Design (for Both Ambient and Pressure Sides of the Core)
- Individually Boxed and Protected for Secure Transport Through Single Piece Mail Services
- Batch Brazed in CSF's State-of-the-Art Digital Vacuum Brazing Oven (12 Ovens in Total)
- Strict Quality Control and Quality Testing, Including Individual Pressure Testing
- Hand-Built Using Jigs & Fixtures for a Perfectly Straight Core for Easy Welding
- Pressure Tested at 120psi for Maximum Reliability in Extreme Boost Applications
- Dimensions: 25"x12"x4.5" (635mm x 300mm x 115mm)
- Heavy-Duty Bar & Plate Intercooler Cores
- HP Rating: 1200
- Cross-flow
$429.00
CSF Bar & Plate Intercooler Cores are used by some of the most renowned tuning and performance companies in the industry. This 25" x 12" x 3.5" Horizontal Flow Core is rated for 1000 WHP and the perfect fit for your custom high-performance intercooler. Each CSF Intercooler core is pressure tested at 120psi for maximum reliability in extreme boost applications. Hand-Built using jigs & fixtures for a perfectly straight core in a clean room using gloves inside the CSF factory to ensure proper brazing and a clean surface for future welding. Featuring a multi-louvered high precision staggered fin design (for both ambient and pressure sides of the core) for the best heat transfer possible.
- Manufactured by Hand in a Clean Room Using Gloves Inside the CSF Cooling Factory to Ensure Proper Brazing and a Clean Surface for Future Welding
- Multi-Louvered High Precision Staggered Fin Design (for Both Ambient and Pressure Sides of the Core)
- Individually Boxed and Protected for Secure Transport Through Single Piece Mail Services
- Batch Brazed in CSF's State-of-the-Art Digital Vacuum Brazing Oven (12 Ovens in Total)
- Strict Quality Control and Quality Testing, Including Individual Pressure Testing
- Hand-Built Using Jigs & Fixtures for a Perfectly Straight Core for Easy Welding
- Pressure Tested at 120psi for Maximum Reliability in Extreme Boost Applications
- Dimensions: 25"x12"x3.5" (635mm x 300mm x 90mm)
- Heavy-Duty Bar & Plate Intercooler Cores
- HP Rating: 1000
- Cross-flow
$529.00
CSF Bar & Plate Intercooler Cores are used by some of the most renowned tuning and performance companies in the industry. This 18" x 12" x 6" Horizontal Flow Core is rated for 1300 WHP and the perfect fit for your custom high-performance intercooler. Each CSF Intercooler core is pressure tested at 120psi for maximum reliability in extreme boost applications. Hand-Built using jigs & fixtures for a perfectly straight core in a clean room using gloves inside the CSF factory to ensure proper brazing and a clean surface for future welding. Featuring a multi-louvered high precision staggered fin design (for both ambient and pressure sides of the core) for the best heat transfer possible.
- Manufactured by Hand in a Clean Room Using Gloves Inside the CSF Cooling Factory to Ensure Proper Brazing and a Clean Surface for Future Welding
- Multi-Louvered High Precision Staggered Fin Design (for Both Ambient and Pressure Sides of the Core)
- Individually Boxed and Protected for Secure Transport Through Single Piece Mail Services
- Batch Brazed in CSF's State-of-the-Art Digital Vacuum Brazing Oven (12 Ovens in Total)
- Strict Quality Control and Quality Testing, Including Individual Pressure Testing
- Hand-Built Using Jigs & Fixtures for a Perfectly Straight Core for Easy Welding
- Pressure Tested at 120psi for Maximum Reliability in Extreme Boost Applications
- Dimensions: 18"x12"x6" (455mm x 300mm x 150mm)
- Heavy-Duty Bar & Plate Intercooler Cores
- HP Rating: 1300
- Cross-flow
$451.89
$313.23
$399.07
CSF Heavy Duty Intercoolers are the perfect upgrade for your 13-17 Ram 2500/3500 6.7L TD. The Heavy-Duty Bar & Plate Construction All-Aluminum Cast End Tanks have been Pressure Tested at 120 psi for Maximum Reliability in Extreme Boost Applications. This intercooler is a true "Drop-in Fit" installation with precise OEM-Style inlet/outlet connections and requires no modifications. In addition, each cooler comes finished in CSF's Thermal Rejection Powder-Coating for greater cooling performance and a sleek OEM+ look. Thermal Rejection coatings offer up to 15% improvement in heat dissipation over non coated intercoolers.
- High-Density internal/external fin design for maximum surface area contact and high-performance cooling efficiency
- Precise "Quick-Connect" inlet/outlet connections for a secure "OEM fit" (when applicable)
- Pressure tested at 120 psi for maximum reliability in extreme boost applications
- CSF's leading high quality thermal rejection powder coating finish
- "Drop-in" fit requiring no modifications to install.
- Heavy duty bar & plate core construction
- All-aluminium cast endtanks
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2013-2018 | Ram | 2500 | Big Horn |
| 2013-2018 | Ram | 2500 | Laramie |
| 2014-2015 | Ram | 2500 | Laramie Limited |
| 2013-2018 | Ram | 2500 | Laramie Longhorn |
| 2016-2018 | Ram | 2500 | Limited |
| 2013-2015 | Ram | 2500 | Lone Star |
| 2013-2016 | Ram | 2500 | Outdoorsman |
| 2013-2018 | Ram | 2500 | SLT |
| 2013 | Ram | 2500 | ST |
| 2013-2018 | Ram | 2500 | Tradesman |
| 2013-2018 | Ram | 3500 | Big Horn |
| 2013-2018 | Ram | 3500 | Laramie |
| 2014-2015 | Ram | 3500 | Laramie Limited |
| 2013-2018 | Ram | 3500 | Laramie Longhorn |
| 2016-2018 | Ram | 3500 | Limited |
| 2013-2015,2017 | Ram | 3500 | Lone Star |
| 2013-2018 | Ram | 3500 | SLT |
| 2013 | Ram | 3500 | ST |
| 2013-2018 | Ram | 3500 | Tradesman |
$323.46
$175.06
$123.43
$294.26
$227.46
$362.57
$317.30
$324.00
$364.50
$280.84
$326.59
$377.41
BorgWarner is the leading manufacturer of turbochargers supplied to nearly ever OEM vehicle brand. BorgWarner offers a comprehensive portfolio of aftermarket service turbochargers for the passenger car light vehicle market. Distributors and customers have access to OE-quality parts through the aftermarket channel for import and domestic vehicles including Volkswagen, Audi, Porsche, BMW, Mini, Land Rover, Volvo, Hyundai and more.
- Same functionality and performance that BorgWarner supplies to the engine manufacturer as original equipment
- Replacement for K03-0118 only with turbine housing outlet gasket from BMW with no. 7 589 503
- Water-cooled bearing housing
- Turbo Model: K03
Showing 1500/1816
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.