This set of two Injector Dynamics ID1300 fuel injectors is engineered for precise fuel delivery in high-performance applications. These injectors are designed to provide consistent flow rates and atomization, featuring a compact 34mm length and 14mm O-rings for both the top and lower seats. Equipped with a USCAR electrical connector, they integrate seamlessly with compatible wiring harnesses for a secure, moisture-resistant connection.

• Manufacturer Part Number: 1300.34.14.14.2
• Series: ID1300
• Connector Type: USCAR
• Overall Length: 34mm
• Top O-Ring Diameter: 14mm
• Lower O-Ring Diameter: 14mm
• Quantity: Set of 2

Fits select 2015-2024 Audi R8 models. This matched set of 10 Injector Dynamics 1300-XDS fuel injectors is engineered specifically for high-performance applications that demand precision and high flow. Developed in partnership with Bosch Motorsport, the 1300-XDS series features internal components designed to resist the corrosive nature of alcohol-based fuels while maintaining stable flow at high pressures.

These injectors are configured for a direct fit into the Audi R8's factory location, utilizing a 14mm lower o-ring. This specific configuration is the standard length and requires no additional adapters for installation, ensuring a clean and secure fitment in the rail and manifold. Each injector undergoes a rigorous validation process to ensure the set is perfectly matched for consistent delivery across all cylinders.

• Manufacturer Part Number: 1300.34.14.14.10
• Product Series: 1300-XDS
• Quantity: Set of 10
• Lower O-Ring: 14mm
• Adapter Requirements: None (Standard fitment)
• Compatibility: All known fuels including E85 and gasoline

Fits 2013-2023 Subaru BRZ models. These Injector Dynamics ID1300-XDS series injectors are engineered specifically for high-performance applications requiring high flow rates while maintaining exceptional low-flow control.

The ID1300 was developed in partnership with Bosch Motorsport to fill the gap between the ID1050x and ID1700x. It features all-stainless internals, making it fully compatible with all known automotive fuels, including corrosive alcohol-based fuels like E85. This ensures long-term reliability and consistent spray patterns even in demanding forced-induction setups.

• Flow Rate: 1300cc/min at 3.0 bar (43.5 psi)
• All-stainless internals for maximum fuel compatibility (E85/Ethanol/Methanol)
• Exceptional idle and cruise characteristics
• Matched sets with precise dead-time characterization
• Direct-fit for the Subaru BRZ fuel rail and harness
• Manufacturer Part Number: 1300.18.04.36.11.4

Each set includes four flow-matched injectors with application-specific adapters for a true bolt-on installation.

Fits 2004-2006 Subaru WRX STi.

The Injector Dynamics ID1300 top-feed conversion kit allows 2004-2006 Subaru STi owners to upgrade from the factory side-feed injector configuration to a modern top-feed setup. This transition is essential for high-horsepower builds requiring the superior flow and tuning stability of the ID1300 series. Designed with all-stainless internals, these injectors are fully compatible with all known automotive fuels, including E85 and other alcohol-based fuels.

Each injector is flow-matched to tight tolerances to ensure consistent fueling across all cylinders, improving idle quality and throttle response even at high duty cycles. This kit provides a complete solution for vehicles exceeding the limits of the stock fuel system while maintaining excellent low-pulse-width linearity.

• Flow Rate: 1300cc/min at 3.0 bar (43.5 psi)
• Set of 4 matched fuel injectors
• Converts factory side-feed systems to top-feed
• Stainless steel internals for maximum corrosion resistance
• Compatible with gasoline, ethanol, and methanol
• Manufacturer Part Number: 1300.18.01.48.14.4

Fits 1993-1995 Mazda RX-7.

The Injector Dynamics ID1300 is an all-fuel compatible injector specifically designed to handle the corrosive nature of ethanol and methanol while maintaining excellent performance with standard gasoline. These 1300cc/min injectors provide a significant fuel delivery upgrade for high-output rotary engines, ensuring stable idle and precise fuel metering at high duty cycles.

• Nominal Flow Rate: 1300cc/min @ 3.0 Bar (43.5 psi)
• Construction: Stainless steel internals for full compatibility with E85, Ethanol, and Methanol
• Fitment: 14mm purple adapters for correct seating and sealing
• Matching: Dynamically flow-matched set for consistent cylinder-to-cylinder performance
• Manufacturer Part Number: 1300.11.06.60.14.2

This set includes two injectors designed for drop-in installation on the FD3S platform, providing the necessary headroom for increased boost levels and alternative fuel conversions without sacrificing low-end drivability.

Fits 2004-2005 Mazda Mazdaspeed Miata.

The Injector Dynamics ID1300 is a high-performance fuel injector developed in partnership with Bosch Motorsport. Specifically engineered for compatibility with all known automotive fuels, these injectors feature all-stainless internals, making them fully resistant to the corrosive nature of methanol and ethanol (E85). They provide a significant flow increase for forced induction builds while maintaining the linear response and idle stability Injector Dynamics is known for.

This set of four is flow-matched to tight tolerances across the entire pulse width range, ensuring consistent cylinder-to-cylinder fueling. By using the included characterization data, tuners can achieve OE-level drivability and precise fuel control under both vacuum and high-boost conditions.

• Manufacturer Part Number: 1300.11.02.60.11.4
• Nominal Flow Rate: 1300cc/min @ 3.0 Bar (43.5 psi)
• All-stainless internals for full ethanol/E85 compatibility
• Linear response down to low pulse widths for superior idle quality
• High-impedance design for compatibility with factory and aftermarket ECUs
• Set of 4 flow-matched injectors with application-specific adapters

Upgrade your vehicle's fueling system with the Injector Dynamics ID1050X series, the performance-driven evolution of the industry-standard ID1000. These injectors are engineered for precision and reliability, featuring an all-stainless steel internal construction that ensures full compatibility with all known automotive fuels, including corrosive alcohol-based options like E85.

• Flow-matched set of 6 injectors provides consistent cylinder-to-cylinder delivery for improved idle and tuning accuracy.
• Equipped with 14mm purple anodized aluminum adaptor tops and Denso-style lower seals for specific fuel rail and manifold requirements.
• Extended service life and improved internals for high-pressure applications and forced induction environments.
• Excellent low-flow linearity for smooth operation at low pulse widths.
• Manufacturer Part Number: 1050.60.14.D.6

Provide your engine with precise, flow-matched fuel delivery using this set of eight Injector Dynamics 1050cc injectors. Engineered to provide exceptional idle quality and consistency at low pulse widths, these injectors are a staple for high-performance builds requiring reliable fueling under boost or high-load conditions.

This specific configuration is built to a 60mm length (O-ring to O-ring) and includes 14mm grey adapter tops along with blue bottom adapters to ensure a proper seal in compatible fuel rails and intake manifolds. The internal components are designed for high-impedance operation and are compatible with all known automotive fuels, including E85.

• Flow Rate: 1050cc/min at 3.0 Bar (43.5 psi)
• Total Length: 60mm
• Inlet Diameter: 14mm (Grey Adapter Top)
• Outlet Diameter: 14mm (Blue Bottom Adapter)
• Quantity: Set of 8 matched injectors
• Corrosion-resistant internals for long-term fuel compatibility
• Manufacturer Part Number: 1050.60.14.14B.8

The Injector Dynamics 1050X is a high-performance fueling solution designed for precision and reliability. This set of four injectors represents the evolution of the industry-standard ID1000, featuring a corrosion-resistant internal construction that makes it fully compatible with all known automotive fuels, including high-ethanol blends like E85. These injectors deliver exceptional idle quality and precise fuel metering across the entire flow range.

Engineered for seamless integration, this kit includes 14mm adapters to ensure a proper seal and fitment within the fuel rail and manifold. Every injector undergoes rigorous testing to provide the tightest flow matching in the industry, ensuring consistent cylinder-to-cylinder fuel distribution for optimized engine performance and safety.

• Manufacturer Part Number: 1050.60.14.14B.4
• Quantity: Set of 4
• Top Adapter: 14mm (Grey)
• Bottom Adapter: 14mm (Silver)
• Compatibility: All automotive fuels including E85
• Design: Corrosion-resistant stainless steel internals
• Flow Matching: Tightest tolerances for consistent delivery

The ID1050X is the evolution of the industry-standard ID1000, specifically engineered to provide improved flow at low pulse widths and higher pressure capabilities. This set of eight injectors features corrosion-resistant stainless steel internals, making them fully compatible with all known fuels, including E85 and other alcohol-based fuels.

• Nominal Flow Rate: 1065cc/min at 3.0 Bar (43.5 psi)
• 14mm Purple top adapters for specific fuel rail fitment
• Replaceable internal filter for extended service life
• Stainless steel internals for maximum chemical resistance
• Precision matched sets for consistent cylinder-to-cylinder fuel delivery
• Manufacturer Part Number: 1050.60.14.14.8

This kit includes eight ID1050X injectors equipped with 14mm purple adapters, providing a drop-in solution for high-output builds requiring precise fueling control and ethanol compatibility.

The Injector Dynamics ID1050X series represents a significant advancement in fuel injector technology, offering superior atomization and consistency across the entire operating range. This set of 6 injectors includes 14mm purple top adapters, providing the specific height and seal diameter required for performance fuel rail configurations. Designed for demanding applications, the ID1050X features an all-stainless internal construction, making it fully compatible with alternative fuels including E85 and oxygenated racing fuels.

• Full compatibility with all known fuels including E85, methanol, and MTBE
• Corrosion-resistant stainless steel internals for long-term reliability
• Stable performance at high pressures and low pulse widths
• Includes 14mm purple adapters and necessary O-rings for installation
• Manufacturer Part Number: 1050.60.14.14.6

Upgrade your vehicle's fuel system with the Injector Dynamics ID1050X, the high-performance evolution of the legendary ID1000 series. Designed for demanding applications, these injectors are built to handle high fuel pressures and provide exceptional atomization. The ID1050X features a corrosion-resistant internal flow path, making it fully compatible with all known automotive fuels, including E85 and alcohol-based blends.

This set of five injectors comes equipped with 14mm purple adaptors to ensure a precise fit for specific fuel rail and manifold configurations. These injectors are not just modified OE parts; they are motorsport-grade components engineered to provide linear flow across a wide range of pulse widths. Each set is flow-matched to tight tolerances to ensure consistent performance across all cylinders.

• Injector Series: ID1050X
• Adaptor Size: 14mm (Purple)
• Quantity: Set of 5 Injectors
• Fuel Compatibility: All known fuels including E85
• Corrosion-resistant internals for long-term reliability
• Manufacturer Part Number: 1050.60.14.14.5

The Injector Dynamics ID1050X is the high-performance evolution of the ID1000, engineered to provide precise fuel metering in a variety of automotive applications. This set of four injectors features an all-stainless internal construction, ensuring full compatibility with all known fuels, including alcohol-based options such as E85, Methanol, and MTBE. The 14mm purple top adapters are designed for a secure fit in fuel rails requiring a standard 14mm O-ring diameter.

Built using a Bosch motorsport core, the ID1050X series provides exceptional atomization and a highly linear flow rate even at low pulse widths. These high-impedance injectors offer the granular control necessary for stable idling and smooth low-load transitions while maintaining the flow capacity needed for high-boost or naturally aspirated performance builds.

• Manufacturer Part Number: 1050.60.14.14.4
• Product Series: ID1050X
• Adapter Size: 14mm (Purple) Top
• Quantity: Matched Set of 4
• Internal Construction: Corrosion-resistant stainless steel internals
• Fuel Compatibility: Safe for Pump Gas, E85, Methanol, and Oxygenated fuels

The Injector Dynamics ID1050X is the evolution of the industry-standard ID1000, engineered for high-performance applications that demand precise fuel metering and maximum reliability. These injectors feature all-stainless internals, making them fully compatible with alternative fuels including E85. Designed to provide a consistent flow rate across a wide range of pulse widths, the ID1050X is the go-to choice for tuners seeking stability and performance.

• Part Number: 1050.60.14.14.2
• Flow Rate: 1065cc/min at 3.0 Bar (43.5 psi) using gasoline at 52 degrees C (125 degrees F)
• Nominal Length: 60mm (O-ring to O-ring)
• Top O-Ring: 14mm (Purple Top)
• Lower O-Ring: 14mm
• Construction: Corrosion-resistant stainless steel internals for E85 compatibility
• Circuit Type: High Impedance
• Included: Set of 2 matched injectors

Upgrade your fuel system with this precision-matched set of eight Injector Dynamics ID1050X fuel injectors. The ID1050X series is engineered to provide exceptional atomization and consistent flow, making it an industry standard for high-performance tuning applications. This specific kit features 11mm blue adaptor tops and Denso-style lower cushions to ensure a secure, leak-free seal within the fuel rail and intake manifold.

• Series: ID1050X
• Adaptor Tops: 11mm (Blue)
• Lower Cushions: Denso style
• Quantity: Set of 8 matched injectors
• Manufacturer Part Number: 1050.60.11.D.8

The Injector Dynamics ID1050X is a high-performance, high-impedance fuel injector designed for consistency and durability in demanding automotive environments. This matched set of six injectors is configured with 11mm blue adaptor tops and Denso lower cushions, ensuring a precise fit and reliable seal in compatible fuel rails and intake manifolds.

As part of the X-Series, these injectors feature corrosion-resistant internal components, making them compatible with a wide range of fuels. The ID1050X series is engineered to provide excellent low-flow linearity and high-flow capacity, solving common tuning issues at idle while delivering the volume needed for high-output applications.

• Manufacturer Part Number: 1050.60.11.D.6
• Series: ID1050X
• Adaptor Diameter: 11mm
• Adaptor Color: Blue
• Lower Seals: Denso Lower Cushions
• Quantity: Matched Set of 6

The Injector Dynamics ID1050X is the evolution of the industry-standard high-performance fuel injector. Designed to provide exceptional flow control and durability, this set of four injectors is engineered for enthusiasts requiring precise fuel delivery in demanding environments. These units feature 11mm blue adaptor tops and Denso lower seals for specific fuel rail and intake manifold fitment.

Constructed with all-stainless internals, the ID1050X series is fully compatible with all known fuels, including corrosive ethanol-based fuels like E85. These injectors provide superior low-pulse-width linearity and are flow-matched to ensure consistent performance across all cylinders, simplifying the tuning process and improving idle quality.

• Manufacturer Part Number: 1050.60.11.D.4
• Series: ID1050X
• Adaptor Tops: 11mm (Blue)
• Lower Seal: Denso style
• Quantity: Set of 4
• Compatibility: All known fuels including E85
• Internals: Corrosion-resistant stainless steel

Ensure precise fuel delivery with this set of two Injector Dynamics ID1050X fuel injectors. As an evolution of the industry-standard ID1000, the ID1050X series is engineered for high-performance applications, featuring corrosion-resistant internals that make it compatible with all known automotive fuels, including E85. This configuration is specifically equipped with 11mm blue top adaptors and Denso-style lower cushions to facilitate a secure, leak-free installation in matching fuel rail and intake manifold setups.

These injectors are built to provide superior atomization and consistent flow rates, crucial for maintaining optimal engine performance under varying loads. By utilizing the included hardware, you ensure proper fitment and sealing without the need for custom fabrication.

• Manufacturer Part Number: 1050.60.11.D.2
• Series: ID1050X
• Quantity: Set of 2
• Adaptors: 11mm Blue Top Adaptors
• Lower Seals: Denso Lower Cushions
• Fuel Compatibility: Compatible with all known automotive fuels

Upgrade your fueling system with the Injector Dynamics ID1050X, a high-performance fuel injector engineered for precision and reliability. This set of six injectors is designed to provide exceptional idle and cruise behavior while delivering the flow rates required for forced induction and modified naturally aspirated engines. The ID1050X features corrosion-resistant stainless steel internals, making it fully compatible with all known fuels, including E85 and alcohol-based blends.

Developed as the successor to the ID1000, the ID1050X offers improved performance at higher fuel pressures and a compact body for easier installation. These injectors include 11mm (blue) top adapters to ensure precise fitment with specific fuel rail configurations. Every set is matched by flow and dead time to ensure consistent cylinder-to-cylinder performance across the entire operating range.

• Manufacturer: Injector Dynamics
• Series: ID1050X
• Adapter Size: 11mm (Blue Top)
• Quantity: Set of 6
• Compatibility: Safe for E85 and gasoline
• Internal Material: Stainless Steel
• MPN: 1050.60.11.14.6

This set of six Injector Dynamics 1050-XDS injectors provides high-precision fuel delivery for the Nissan GT-R platform. The 1050-XDS series represents the latest evolution of the ID1050x, featuring improved internal components and materials for better long-term reliability and compatibility with various fuel types, including E85.

These injectors are configured with grey 14mm adapter tops and GTR-specific lower spacers, allowing them to seat correctly in the factory fuel rail and intake manifold. Each set is flow-matched and offset-matched to ensure uniform cylinder performance, which is essential for maintaining engine health and achieving a stable idle in high-output turbocharged applications.

• Series: 1050-XDS
• Adapter Top: 14mm (Grey)
• Lower Fitting: GTR Lower Spacer
• Quantity: Set of 6
• Compatibility: Nissan GT-R (R35)
• Manufacturer Part Number: 1050.48.14.R35.6

The Injector Dynamics ID1050X is the highly evolved successor to the industry-standard ID1000, designed to provide superior atomization and flow control in high-performance applications. This set of four injectors is configured with 14mm grey top adaptors and GTR-specific lower spacers to ensure a precise, drop-in fit for fuel rails and manifolds requiring these specific dimensions.

Built to withstand the demands of modern performance tuning, the ID1050X features corrosion-resistant internals, making it fully compatible with all known fuels, including ethanol-based E85. These injectors provide exceptional idle stability and linear flow across the entire operating range, which is critical for consistent tuning and reliable power delivery.

• Manufacturer Part Number: 1050.48.14.R35.4
• Series: ID1050X (X-Series)
• Adaptor Size: 14mm (Grey)
• Lower Hardware: GTR Lower Spacers
• Quantity: Matched Set of 4
• Fuel Compatibility: All known automotive fuels, including E85 and Methanol
• Construction: Corrosion-resistant internal components

Upgrade your fuel system with the Injector Dynamics ID1050X series, the industry standard for high-performance fueling. This matched set of eight injectors features 14mm grey adaptor tops and orange lower o-rings, designed to provide a precise fit and seal in specific manifold and fuel rail configurations. The ID1050X is engineered for superior consistency and atomization, ensuring excellent idle quality and linear response even in high-demand applications.

• Brand: Injector Dynamics
• Series: ID1050X
• Manufacturer Part Number: 1050.48.14.15.8
• Top Adaptor: 14mm (Grey)
• Lower Seal: Orange O-Ring
• Quantity: Set of 8 matched injectors
• Fuel Compatibility: Compatible with all known fuels including E85

The Injector Dynamics ID1050X is the highly evolved successor to the industry-standard ID1000, engineered specifically for high-performance motorsport applications. This set of 8 injectors features 14mm black adaptor bottoms, providing a precise fit for compatible fuel rail configurations while ensuring a reliable seal under high pressure.

Constructed with all-stainless internals, the ID1050X is fully compatible with all known automotive fuels, including corrosive E85 and alcohol-based blends. These injectors are designed to provide exceptional linearity and atomization even at low pulse widths, allowing for stable idling and smooth drivability on high-horsepower builds that require massive fuel flow at the top end.

• Manufacturer Part Number: 1050.48.14.14B.8
• Corrosion-resistant stainless steel internal components
• Compatible with E85, methanol, and all common automotive fuels
• High-pressure capability for forced induction and turbocharged setups
• 14mm black adaptor bottoms for secure rail fitment
• Set of 8 flow-matched injectors for consistent cylinder-to-cylinder performance

The Injector Dynamics ID1050X series is engineered to provide precise fuel delivery and superior atomization for high-performance applications. This matched set of six injectors is designed to maintain exceptional idle quality and flow consistency. Built with corrosion-resistant internals, the ID1050X is compatible with a wide range of automotive fuels to meet the demands of modern tuning.

• Brand: Injector Dynamics
• Series: ID1050X
• Manufacturer Part Number: 1050.48.14.14B.6
• Adaptor Bottom: 14mm (Black)
• Quantity: Matched Set of 6

Each injector in this set features a 14mm black adaptor bottom, ensuring a secure fit and proper height within the fuel rail. These components are built to strict tolerances, providing the reliability required for both street and track use.

The Injector Dynamics ID1050X is the evolution of the industry-standard ID1000, developed in partnership with Bosch Motorsport. This X-Series injector is a performance-optimized solution for high-output engines requiring precision fueling and complete compatibility with all known fuels, including E85 and alcohol-based blends.

• Corrosion Resistant: Features all-stainless internals for long-term durability when used with corrosive oxygenated fuels.
• Improved Flow: Engineered for better performance at higher fuel pressures and improved low-flow control compared to the original ID1000.
• Specific Configuration: Includes 14mm grey adaptor bottoms for precise fuel rail fitment.
• Flow Matched: Sold as a matched set of 4 to ensure consistent cylinder-to-cylinder fuel delivery.
• Manufacturer Part Number: 1050.48.14.14B.4

The Injector Dynamics ID1050X is the evolution of the industry-standard ID1000, re-engineered from the ground up in partnership with Bosch to provide exceptional fuel atomization and control. This set of eight injectors is equipped with 14mm grey adaptor tops, making them a direct fit for many performance fuel rail configurations requiring standard O-ring diameters.

• Corrosion Resistant Internals: Fully compatible with all known fuels, including high-ethanol blends like E85 and M5 for long-term reliability.
• Superior Linearity: Provides unmatched low pulse-width consistency, ensuring smooth idle and drivability even on high-horsepower builds.
• High-Pressure Capability: Maintains a consistent flow pattern even at elevated fuel pressures, unlike many modified OE injectors.
• Matched Set: Each set is flow-matched to tight tolerances to ensure cylinder-to-cylinder fuel distribution is identical.
• Manufacturer Part Number: 1050.48.14.14.8

Whether you are tuning a forced induction setup or a high-compression naturally aspirated engine, the ID1050X delivers the precision required for modern ECU tuning and maximum engine safety.

Upgrade your fuel system with the Injector Dynamics ID1050X, the refined evolution of the industry-standard ID1000. This set of 6 high-performance injectors is engineered to provide exceptional idle quality and precise fuel metering for forced induction and high-output naturally aspirated engines. Featuring an all-stainless steel internal construction, these injectors are fully compatible with alternative fuels, including E85, methanol, and alcohol blends.

These ID1050X units include grey adaptor tops to ensure proper fitment height and port diameter for your specific fuel rail configuration. The X-Series design offers improved internal flow characteristics and a higher maximum pressure capability compared to previous generations, making them a reliable choice for professional tuners and enthusiasts alike.

• Manufacturer Part Number: 1050.48.14.14.6
• Product Series: ID1050X
• Configuration: Set of 6 Injectors
• Material: Corrosion-resistant stainless steel internals
• Adaptor Style: Grey Adaptor Tops included
• Compatibility: Compatible with all known automotive fuels
• Impedance: High Impedance

The Injector Dynamics ID1050X is a high-performance fuel delivery solution designed for precision tuning and reliability. This set of four injectors features 14mm grey adaptor tops, ensuring a secure fit in compatible fuel rails. Built with corrosion-resistant internals, the ID1050X is fully compatible with all known automotive fuels, including ethanol-based fuels like E85, making it an ideal choice for forced induction or high-output naturally aspirated builds.

• Manufacturer Part Number: 1050.48.14.14.4
• Product Series: ID1050X
• Adaptor Top Size: 14mm (Grey)
• Quantity: Matched set of 4
• Fuel Compatibility: All known automotive fuels including E85
• Design: Corrosion-resistant internal components for long-term durability

The Injector Dynamics ID1050cc fuel injectors are engineered to provide precise fuel delivery and exceptional idle stability for high-performance engines. This set provides a nominal flow rate of 1050cc/min, maintaining a linear response even at very low pulse widths. This characteristic allows for easier tuning and smoother drivability compared to traditional high-flow injectors.

This specific configuration is built for 48mm length requirements, featuring a grey 14mm top adapter and a 14mm lower o-ring to ensure a proper seal in the fuel rail and intake manifold. Each unit is rigorously tested to ensure tight flow matching, providing consistent performance across all cylinders.

• Brand: Injector Dynamics
• Series: ID1050cc
• MPN: 1050.48.14.14.2
• Length: 48mm
• Top Adapter: 14mm (Grey)
• Lower O-Ring: 14mm
• Quantity: Set of 2

The Injector Dynamics ID1050X is the motorsport standard for high-performance fueling, providing exceptional flow consistency and atomization. This set of four injectors comes equipped with WRX-16B 11mm red bottom adaptors, ensuring a precise fit for specific fuel rail configurations. Built with corrosion-resistant internals, these injectors are fully compatible with all known automotive fuels, including E85, and offer superior stability even at low pulse widths.

• Manufacturer Part Number: 1050.48.11.WRX.4
• Injector Series: ID1050X
• Adaptor Specification: WRX-16B 11mm Bottom Adaptors
• Color: Red
• Quantity: Set of 4 injectors with adaptors
• Internal Construction: Corrosion-resistant materials for alternative fuel compatibility
• Performance: High-pressure capability and optimized flow matching