Upgrade your fuel system with the Injector Dynamics ID1050X, the refined evolution of the industry-standard ID1000. This set of 6 high-performance injectors is engineered to provide exceptional idle quality and precise fuel metering for forced induction and high-output naturally aspirated engines. Featuring an all-stainless steel internal construction, these injectors are fully compatible with alternative fuels, including E85, methanol, and alcohol blends.

These ID1050X units include grey adaptor tops to ensure proper fitment height and port diameter for your specific fuel rail configuration. The X-Series design offers improved internal flow characteristics and a higher maximum pressure capability compared to previous generations, making them a reliable choice for professional tuners and enthusiasts alike.

• Manufacturer Part Number: 1050.48.14.14.6
• Product Series: ID1050X
• Configuration: Set of 6 Injectors
• Material: Corrosion-resistant stainless steel internals
• Adaptor Style: Grey Adaptor Tops included
• Compatibility: Compatible with all known automotive fuels
• Impedance: High Impedance

The Injector Dynamics ID1050X is the evolution of the industry-standard ID1000, specifically engineered for high-flow performance and total compatibility with all known fuels, including E85 and alcohol-based fuels. This set of 6 matched injectors features corrosion-resistant internals to ensure long-term reliability in demanding conditions. Designed for precision, the ID1050X provides exceptional linear response and consistent fuel atomization, allowing for smoother idle and superior drivability even in high-horsepower applications.

This specific configuration features a 14mm lower O-ring and no top adapter, making it ideal for fuel rails that accommodate standard height injectors without the need for height extensions. Each set is flow-matched to tight tolerances to ensure cylinder-to-cylinder consistency and simplified tuning.

• Manufacturer Part Number: 1050.34.14.14.6
• Lower O-Ring: 14mm
• Top Style: No Adapter Top
• Fuel Compatibility: All known fuels including E85/Ethanol
• Internal Construction: Corrosion-resistant
• Quantity: Set of 6 matched injectors

Fits 1989-2002 Nissan Skyline GT-R (RB26DETT).

DeatschWerks 1000cc top feed fuel injectors are engineered to provide high-flow fuel delivery for modified RB26DETT engines. These low impedance (peak-and-hold) injectors offer the precise pulse-width control and atomization required for high-horsepower builds. Designed as a drop-in fitment solution, this set simplifies the upgrade process by matching the factory fueling architecture while significantly increasing capacity for forced induction or racing applications.

• Flow Rate: 1000cc/min
• Configuration: Top Feed
• Impedance: Low Impedance (Peak-and-Hold)
• Quantity: Set of 6
• Engine Compatibility: Nissan RB26DETT
• Manufacturer Part Number: 42M-01-1000-6

Fits select 2011-2017 Ford F-150 and Taurus SHO (3.5L).

DeatschWerks 1700cc GDI Fuel Injectors provide high-performance fuel delivery for Ford's 3.5L EcoBoost platform. Engineered to meet the rigorous demands of high-output forced induction engines, these injectors offer the increased flow capacity required for aggressive tuning while maintaining the precision needed for Gasoline Direct Injection (GDI) systems.

Based in Oklahoma City, DeatschWerks (DW) utilizes a 36,000sf facility dedicated to the design, end-manufacturing, and quality assurance of fuel system components. Since 2004, DW has specialized in high-flow, drop-in fitment solutions that balance extreme performance with reliable operation.

• Flow Rate: 1700cc
• Fueling Type: Gasoline Direct Injection (GDI)
• Application: Ford 3.5L EcoBoost
• Manufacturer Part Number: 19S-00-1700-6
• Engineered for precise spray pattern and atomization

Fits 2001-2005 Lexus IS300 Base and Sportcross (2JZ-GE).

Engineered for high-performance applications, this set of six DeatschWerks fuel injectors provides a consistent 1000cc/min flow rate, essential for supporting increased power levels in forced induction or high-output 2JZ-GE builds. These injectors feature an application-specific drop-in fitment, integrating with the factory fuel system while providing the precise fuel delivery and atomization required for modified engines.

• Flow Rate: 1000cc/min
• Quantity: Set of 6 fuel injectors
• Engine: 2JZ-GE (Non-Turbo)
• Configuration: Drop-in fitment for simplified installation
• Manufacturer Part Number: 18U-12-1000-6

Fits select 1987-2005 BMW 3-Series (323i, 325i, 328i, M3) and Volvo (960, S80, S90, V90, XC90).

Engineered as a high-performance fuel solution, this DeatschWerks set of six 900cc injectors provides the flow capacity required for high-output naturally aspirated and forced induction builds. These injectors are designed for drop-in fitment, utilizing factory mounting points and electrical connectors for a simplified installation process. Every DW injector set undergoes rigorous flow matching and balancing to ensure consistent fuel delivery across all cylinders, optimizing tuning and engine safety.

• Flow Rate: 900cc/min
• Configuration: Set of 6
• Fitment: Drop-in for M20, M50, and M52 engines and select Volvo applications
• Manufacturer Part Number: 18U-09-0900-6

Fits select 1987-2005 BMW (323i, 325i, 328i, M3) and Volvo (960, S80, S90, V90, XC90) models.

Optimize your fuel delivery with this set of six DeatschWerks high-flow fuel injectors. Specifically engineered for performance applications, these 650cc injectors offer a significant increase in fuel volume over stock units, making them ideal for forced induction or high-output naturally aspirated builds. These injectors are designed for drop-in fitment, mounting directly to the factory fuel rail and integrating with the OE harness for a straightforward installation.

Every DeatschWerks injector set is flow-balanced and undergoes comprehensive testing to ensure consistent performance across all cylinders. This precision balancing is vital for maintaining safe air-fuel ratios and engine longevity under high-load conditions.

• Manufacturer Part Number: 18U-09-0650-6
• Flow Rate: 650cc/min at 3 bar
• Quantity: Set of 6 flow-matched injectors
• Compatibility: Engineered for BMW M20, M50, and M52 platforms
• Fitment: Drop-in installation for supported vehicle applications

Fits 1989-1994 Nissan Skyline equipped with the RB20DET engine.

Designed to support high-performance builds, this matched set of six DeatschWerks 800cc fuel injectors provides the increased flow capacity required for modified RB20DET platforms. These injectors are engineered for a drop-in fitment, allowing them to integrate directly into the factory fuel rail and electrical harness without extensive modification. By replacing worn or lower-capacity OE units, you ensure your fuel system can meet the demands of higher boost levels and increased horsepower.

• Flow Rate: 800cc/min
• Engine Compatibility: RB20DET
• Configuration: Drop-in fitment for factory rail and harness
• Quantity: Matched set of 6 injectors
• Manufacturer Part Number: 18U-02-0800-6

Every DeatschWerks injector set undergoes rigorous flow testing and balancing to ensure consistent delivery across all six cylinders, providing the reliability needed to prevent lean conditions during spirited driving or track use.

Engineered for high-performance applications, these DeatschWerks top-feed fuel injectors provide a drop-in solution for the Nissan Skyline RB20 engine. With a flow rate of 650cc/min, this set of six injectors offers the precise fuel delivery required for modified engines running higher boost or performance tuning. Each injector is flow-balanced to ensure consistent performance across all cylinders, preventing lean conditions and optimizing the air-fuel ratio.

• Engine Compatibility: Nissan Skyline RB20
• Flow Rate: 650cc/min
• Configuration: Top Feed
• Set Count: 6 flow-matched injectors
• Fitment Style: Direct drop-in for compatible fuel rails
• Manufacturer Part Number: 18U-02-0650-6

Fits Nissan Skyline models equipped with the RB20 engine.

DeatschWerks high-flow fuel injectors are engineered to provide a precise, drop-in fuel delivery solution for the Nissan RB20 platform. These 550cc top-feed injectors offer the necessary flow capacity for increased horsepower applications while maintaining consistent idle and low-load performance. By choosing a flow-matched set, you ensure balanced fuel distribution across all six cylinders, which is critical for maintaining engine safety and tuning accuracy under high-demand conditions.

• Flow Rate: 550cc/min
• Configuration: Top-feed fuel injectors
• Quantity: Set of 6
• Compatibility: Direct drop-in fitment for RB20 fuel rails
• Manufacturer Part Number: 18U-02-0550-6

Each injector set undergoes rigorous testing and quality assurance at the DeatschWerks facility to ensure they meet strict flow and latency specifications for your high-performance fuel system.

Fits select 2003-2017 Nissan 350Z, 370Z, and GT-R, Infiniti G35 and G37, and 2004-2005 Volkswagen Golf GTI VR6.

DeatschWerks high-performance fuel injectors are designed as a drop-in fitment solution for enthusiasts seeking reliable fuel delivery in high-output applications. These 1000cc injectors provide the necessary flow for turbocharged, supercharged, or E85 builds while maintaining excellent low-end drivability and idle stability. Each set is flow-matched to ensure balanced fuel distribution across all cylinders, reducing the risk of lean conditions during high-load operation.

• Flow Rate: 1000cc
• Configuration: Set of 6 fuel injectors
• Fitment Style: Drop-in replacement for OE housing
• Compatibility: Compatible with various fuel types including E85
• Manufacturer Part Number: 17U-06-1000-6

This DeatschWerks 650cc top feed fuel injector set is engineered to provide precise fuel metering and atomization for high-performance builds. These injectors are flow-matched in sets of six to ensure balanced fueling across all cylinders, reducing the risk of lean conditions under load. Designed as a drop-in solution, they are developed to integrate with factory mounting points and electrical connections for a straightforward installation.

Fits select 2003-2017 Nissan 350Z and 370Z, Infiniti G35 and G37, and 2004-2005 Volkswagen Golf GTI VR6.

• Manufacturer Part Number: 17U-06-0650-6
• Flow Rating: 650cc
• Configuration: Top Feed
• Quantity: Matched set of 6 injectors
• Installation: Drop-in fitment for OEM fuel rails

Fits select 1998-2017 Nissan 350Z, 370Z, Skyline RB25DET NEO, Infiniti G35, G37, and Volkswagen Golf GTI VR6.

This DeatschWerks fuel injector set provides a precise 440cc flow rate for engines requiring increased fueling capacity or reliable replacement for worn factory units. Each set is dynamically flow-balanced in-house to ensure consistent delivery across all cylinders, which is critical for maintaining optimal air-fuel ratios and engine safety under high-load conditions.

Designed in a top-feed configuration, these injectors are engineered to drop into compatible factory fuel rails, offering a significant upgrade in atomization and response over older injector designs. These high-impedance injectors maintain compatibility with factory ECUs while providing the overhead needed for light-to-moderate performance modifications.

• Flow Rate: 440cc/min
• Configuration: Top Feed
• Quantity: Flow-matched set of 6
• Compatibility: Nissan VQ-series, RB25DET NEO, and VW VR6 engines
• Manufacturer Part Number: 17U-06-0440-6

Fits select 2000-2006 BMW (3-Series/M3), Mercedes-Benz (C32/SLK32 AMG), and Porsche (911) models.

DeatschWerks 550cc fuel injectors are engineered to provide precise fuel delivery for high-performance European applications. Designed as a drop-in fitment solution, these injectors integrate directly into the factory fuel rail and utilize standard electrical connectors for a straightforward installation. Each set is flow-balanced to ensure consistent fuel distribution across all cylinders, which is critical for maintaining safe air-fuel ratios in forced induction or modified naturally aspirated engines.

• Flow Rate: 550cc/min
• Quantity: Matched set of 6
• Fitment Type: Drop-in installation
• Manufacturer Part Number: 17U-01-0550-6

Detailed Fitment:

• 2000-2006 BMW 325Ci, 325i, 328Ci, 330Ci, 330i, 330xi, and M3
• 2002-2004 Mercedes-Benz C32 AMG and SLK32 AMG
• 2001-2005 Porsche 911 (Carrera, Carrera 4/4S/S, GT2, GT3, Targa, Turbo, and Turbo S)

Fits select 1998-2006 BMW (323i/325i/330i/M3), Mercedes-Benz (C32/SLK32 AMG), and Porsche 911 models.

DeatschWerks 440cc fuel injectors provide a high-performance, drop-in fueling solution designed for precision and reliability. Engineered to replace factory units in select 6-cylinder BMW, Porsche, and Mercedes-Benz applications, these injectors are ideal for supporting moderate power increases in both naturally aspirated and forced induction setups. Every set is flow-balanced and quality-tested at DeatschWerks' Oklahoma City facility to ensure consistent fuel delivery and optimal engine performance across all cylinders.

• Flow Rate: 440cc/min
• Configuration: Set of 6 injectors
• Manufacturer Part Number: 17U-01-0440-6
• Drop-in fitment for factory fuel rails
• Quality tested for flow consistency and spray pattern

Fits 2005-2010 Ford Mustang (V6 & V8 models).

This set of six DeatschWerks fuel injectors is engineered to provide precise fuel delivery for high-performance applications. Utilizing proven Bosch EV14 technology, these 48mm standard-length injectors offer superior atomization and fast response times, making them an ideal choice for forced induction or E85 builds where increased flow is required. Every set is flow-balanced by DeatschWerks to ensure consistent performance across all cylinders.

• Manufacturer Part Number: 17U-00-0095-6
• Flow Rate: 95lb/hr at 43.5 psi
• Technology: Bosch EV14
• Length: 48mm (Standard)
• Quantity: Set of 6
• Direct-fit for specified Ford Mustang fuel rails

Fits select 2007-2019 Toyota 4Runner, FJ Cruiser, and Tundra models.

This DeatschWerks fuel injector kit features a flow-matched set of six 600cc injectors designed to meet the increased fuel demands of high-performance tuning or forced induction applications. Each set is rigorously tested and balanced to ensure consistent fuel delivery across all cylinders, supporting engine safety and optimized air-fuel ratios. Engineered as a precision fueling solution, these injectors integrate with the factory electrical and fuel rail interfaces for a reliable installation.

• Manufacturer Part Number: 17MX-11-0600-6
• Flow Rate: 600cc/min
• Quantity: Set of 6 (Matched)
• Application: Toyota V6 platforms
• Compatibility: 2007-2014 FJ Cruiser, 2011-2014 Tundra, 2010-2019 4Runner

Fits select 2011-2017 Ford Mustang and Jeep Wrangler models.

DeatschWerks Bosch EV14 fuel injectors provide high-performance fuel delivery designed for tuned and forced-induction applications. These 40mm compact injectors feature a flow rate of 90lb/hr, utilizing Bosch's proven EV14 internal technology to ensure fast response times and superior fuel atomization across the duty cycle.

As part of the DW fuel system line, these injectors are dynamic flow-balanced in-house to ensure precise, consistent performance across all six cylinders. The 40mm compact body is specifically engineered for tight fitment requirements where standard-length injectors may interfere with fuel rail or manifold components. These are a drop-in performance solution for high-output builds on both the Ford and Jeep platforms.

• Flow Rate: 90lb/hr
• Injector Body: 40mm Compact
• Connector: Bosch EV14
• Dynamic flow matching for consistent cylinder-to-cylinder performance
• Improved atomization for better idle and tuning stability
• Manufacturer Part Number: 16U-00-0090-6

Fits 2011-2017 Ford Mustang and Jeep Wrangler (V6-3.7L).

Increase your engine's fueling capacity with this set of DeatschWerks 65lb high-flow fuel injectors. Designed specifically for the 3.7L V6 powerplant, these injectors provide the additional fuel volume required for forced induction setups or aggressive naturally aspirated builds. As a drop-in fitment solution, they integrate seamlessly with the factory fuel rails and electrical harnesses, eliminating the need for complicated wiring or manifold modifications.

DeatschWerks ensures performance reliability through a rigorous multi-point testing process at their Oklahoma City facility. Each injector is flow-matched to ensure consistent cylinder-to-cylinder delivery, critical for maintaining safe air-fuel ratios under load. These injectors are an essential upgrade for owners looking to maximize the potential of their Mustang or Wrangler performance tuning.

• Flow Rate: 65lb/hr
• Engine Application: V6-3.7L
• Fitment Type: Direct drop-in replacement
• Manufacturer Part Number: 16U-00-0065-6
• Compatible with factory fuel rails and connectors

Fits select 2011-2017 Ford Mustang and Jeep Wrangler models (V6-3.7L).

DeatschWerks 50lb fuel injectors provide a high-flow, drop-in fitment solution for owners looking to upgrade their fuel system without modifying factory fuel rails or wiring. These injectors are engineered for precise delivery and consistent atomization, making them an essential component for naturally aspirated builds, forced induction setups, or E85 conversions where factory flow rates are insufficient.

Every DeatschWerks injector set undergoes rigorous quality assurance at their 36,000sf facility, ensuring that flow rates and spray patterns are balanced across the set. Designed specifically for the 3.7L V6 engine platforms in the Mustang and Wrangler, these injectors offer the reliability and performance required for both modern muscle and rugged off-road applications.

• Manufacturer Part Number: 16U-00-0050-6
• Flow Rate: 50lb/hr
• Engine Compatibility: Ford and Jeep V6-3.7L
• Installation: Direct drop-in fitment for OE fuel rails
• Application: Compatible with Sport Compact, Modern Muscle, and Off-Road builds

Fits select 1984-2008 Porsche 911, Boxster, and Cayman, and 1993-1998 Toyota Supra (Base & Twin Turbo).

DeatschWerks Bosch EV14 1200cc fuel injectors are engineered to provide precise fuel delivery for high-performance forced induction and naturally aspirated builds. Utilizing the highly reliable Bosch EV14 injector body, these units offer superior atomization and fast response times even at high pressures. Each set is flow-balanced to ensure consistent performance across all six cylinders, helping you maintain stable air-fuel ratios and reliable power under load.

This kit features a 14mm top o-ring for top-feed fuel rail configurations, making them a straightforward upgrade for tuners looking for high-flow capacity without sacrificing idle quality.

• Manufacturer Part Number: 16MX-14-1200-6
• Flow Rate: 1200cc/min
• Injector Body: Bosch EV14
• Configuration: Top Feed
• O-Ring Size: 14mm Top
• Quantity: Flow-matched set of 6

Fits select 2003-2017 Infiniti G35/G37, Nissan 350Z/370Z/GT-R, and Volkswagen Golf GTI VR6. This set of six DeatschWerks 1200cc fuel injectors is engineered to provide precise fuel delivery for high-performance and forced induction applications. Utilizing Bosch EV14 technology, these injectors offer exceptionally fast response times and superior atomization compared to older injector designs.

These injectors are designed as a drop-in fitment solution, simplifying the upgrade process by utilizing factory-style connectors and mounting points. Every set is flow-balanced to ensure consistent cylinder-to-cylinder fuel distribution, which is critical for maintaining safe air-fuel ratios under heavy load. The 1200cc flow rate provides the headroom necessary for significant power increases on gasoline or E85 fuel systems.

• Manufacturer Part Number: 16MX-06-1200-6
• Flow Rate: 1200cc/min
• Injector Technology: Bosch EV14
• Quantity: Set of 6 matched injectors
• Fitment Type: Drop-in installation
• Fuel Compatibility: Optimized for gasoline and E85

Fits 1990-1996 Nissan 300ZX (Base, 2+2, and Turbo).

These DeatschWerks 740cc side-feed fuel injectors are engineered to provide precise fuel delivery for high-performance 1990-1996 Nissan 300ZX applications. Designed as a drop-in fitment solution, these injectors allow for significant fueling overhead for modified naturally aspirated or forced induction builds without the need for complex rail modifications.

• Flow Rate: 740cc/min
• Feed Type: Side Feed
• Installation: Drop-in fitment for factory fuel rails
• Compatible with 1990-1996 Nissan 300ZX (Z32) chassis
• Manufacturer Part Number: 01J-00-0740-6

Fits 1990-1996 Nissan 300ZX (Base, 2+2, and Turbo).

These DeatschWerks 550cc side-feed fuel injectors deliver high-performance fueling with the convenience of drop-in fitment. Engineered for precision and reliability, these injectors are flow-matched to ensure balanced fuel delivery across all cylinders, which is critical for maintaining safe air-fuel ratios and maximizing performance in forced induction or modified naturally aspirated engines. Designed to fit factory mounting points and electrical connectors, they provide a straightforward upgrade path for your Z32 chassis.

• Manufacturer Part Number: 01J-00-0550-6
• Flow Rate: 550cc/min
• Configuration: Side-feed
• Compatibility: 1990-1996 Nissan 300ZX
• Precision flow-matching for consistent cylinder-to-cylinder delivery
• Direct fit into factory fuel rails and harnesses

Fits 1990-1996 Nissan 300ZX Base, 2+2, and Turbo models.

DeatschWerks 370cc fuel injectors provide a reliable, high-flow solution for 1990-1996 Nissan 300ZX enthusiasts. These side-feed injectors are designed as a drop-in fitment, replacing the factory units to support increased performance while maintaining idle quality and drivability. Each set is flow-balanced to ensure consistent fuel delivery across all cylinders, reducing the risk of lean conditions under load.

• Flow Rate: 370cc/min
• Injector Type: Side Feed
• Set Size: 6 matched injectors
• Fitment: Drop-in installation for Nissan 300ZX factory fuel rails
• Manufacturer Part Number: 01J-00-0370-6

Fits 1990-1996 Nissan 300ZX Base, 2+2, and Turbo models.

Ensure precise fuel delivery and engine reliability with this set of DeatschWerks 270cc side-feed injectors. Specifically engineered for the Nissan Z32 platform, these injectors serve as a direct drop-in solution for both naturally aspirated (VG30DE) and twin-turbocharged (VG30DETT) applications. Each injector is manufactured to provide a consistent spray pattern and accurate flow rate, helping to maintain optimal air-fuel ratios across all cylinders.

DeatschWerks injectors undergo rigorous in-house testing to meet strict quality standards, ensuring they provide the durability required for high-performance use. This kit simplifies the installation process by utilizing factory-style side-feed fitment, eliminating the need for fuel rail modifications.

• Manufacturer Part Number: 01J-00-0270-6
• Flow Rate: 270cc/min
• Configuration: Side Feed
• Compatibility: 1990-1996 Nissan 300ZX (All Submodels)
• Includes all necessary O-rings for installation