Fits select 2008-2015 Cadillac CTS, Chevrolet Camaro, and Pontiac G8 models (Base, V, SS, GT, and others).

The Radium Engineering Fuel Hanger (MPN 20-1320) is a high-performance, drop-in solution designed to replace the restrictive factory pump assembly in GM Zeta and Sigma II platform vehicles. This engineered unit allows for the installation of one or two aftermarket fuel pumps to support high-horsepower builds requiring increased fuel volume and reliability. It is fully compatible with E85 and corrosive fuels.

This hanger is specifically designed to retain the functionality of the factory fuel level sender, ensuring accurate fuel gauge readings. It integrates seamlessly into the OEM fuel tank and provides the flexibility to connect to the factory fuel lines or transition to custom aftermarket lines using Radium adapters.

• Manufacturer Part Number: 20-1320
• Compatible Pumps: Supports one or two AEM 50-1220 or DeatschWerks DW440 pumps (Pumps Not Included)
• Material Compatibility: E85, Ethanol, Methanol, and Gasoline
• Installation: Direct-fit replacement for the OEM hanger assembly
• Plumbing: Compatible with factory or aftermarket fuel lines

Vehicle Fitment:

• 2008-2014 Cadillac CTS (Base, Luxury, Performance, Premium, V, Vsport)
• 2010-2015 Chevrolet Camaro (LS, LT, SS, Z/28, ZL1)
• 2008-2009 Pontiac G8 (Base, GT, GXP)

The Radium Engineering Check Valve Fuel Filter Conversion Kit (20-1221) is designed to upgrade any standard Radium fuel filter by replacing the original outlet cap with one featuring an integrated check valve. This component is critical for high-performance fuel systems where the fuel pump does not have an internal check valve.

By installing this conversion kit, you ensure that fuel pressure is maintained at the rail even after the pump is turned off. This prevents fuel drain-back, which significantly reduces cranking time and ensures more consistent, faster engine starts. The integrated design maintains the compact footprint of the original filter housing while adding essential system functionality.

• Integrated check valve prevents fuel backflow and maintains rail pressure
• Directly replaces the standard outlet cap on any Radium Engineering fuel filter
• Improves engine startup times by keeping the fuel system primed
• Manufacturer Part Number: 20-1221

Fits 2001-2006 BMW E46 325Ci, 325i, 325xi, 330Ci, 330i, 330xi, and M3.

The Radium Engineering Fuel Pump Hanger (MPN 20-1180) is a precision-engineered drop-in replacement for the factory fuel pump assembly in the BMW E46 chassis. This hanger provides a robust mounting solution for aftermarket fuel pumps, allowing enthusiasts to upgrade their fuel system for higher output applications while maintaining a factory-style installation within the tank.

• Direct drop-in fitment for all 2001-2006 BMW E46 models
• Designed for simplified integration of aftermarket fuel pumps
• Replaces the restrictive factory hanger assembly
• Pumps are not included and must be supplied by the installer
• Manufacturer Part Number: 20-1180

This hanger is a critical component for high-performance builds requiring reliable fuel delivery. Note that specific pump compatibility should be verified prior to installation.

Fits select 1990-2003 BMW 3-Series (E36/E46) including 318i, 323i, 325i, 328i, and 330i models.

The Radium Engineering fuel hanger plumbing kit is a comprehensive solution designed specifically for use with Radium in-tank fuel pump hangers on BMW E36 and E46 chassis. This kit (MPN: 20-1175-05) streamlines the fuel delivery process, providing the necessary lines and fittings to integrate seamlessly with your performance fuel system while ensuring maximum reliability under high-demand conditions.

This kit features a high-efficiency microglass filter element. Microglass is preferred for modern electronic fuel injection systems because it offers finer filtration levels and greater dirt-holding capacity than traditional stainless mesh, protecting sensitive fuel injectors from microscopic debris. All components are engineered for compatibility with various fuel types, providing a professional plumbing solution that eliminates guesswork during installation.

• Specifically designed for Radium Engineering BMW E36/E46 in-tank fuel pump hangers
• Includes high-capacity Microglass filter element for superior contaminant removal
• Complete plumbing kit with required fittings and lines
• Direct fitment for BMW 3-Series 1990-2003 (E36 and E46 chassis)
• Manufacturer Part Number: 20-1175-05

Fits select 1990-2000 BMW 318i/is/ti, 323i/Ci/is, 325i/is/iX, 328i/Ci/is, and M3 models.

The Radium Engineering fuel pump hanger provides a robust, high-performance solution for the BMW E36 chassis. This drop-in assembly replaces the factory plastic fuel pump hanger, allowing for the installation of high-flow aftermarket fuel pumps necessary for high-horsepower naturally aspirated or forced induction builds. Designed to bolt directly into the factory fuel tank mounting location, it ensures a secure fit and reliable fuel delivery.

• Direct drop-in replacement for the OEM fuel pump hanger
• CNC-machined construction for durability and precise fitment
• Compatible with select high-flow aftermarket fuel pumps (not included)
• Integrated electrical bulkhead for secure wiring
• Manufacturer Part Number: 20-1170

Note: Fuel pumps are not included and must be supplied by the installer. Please verify pump compatibility prior to installation.

Fits Mazda 13B engines at the primary injector location.

The Radium Engineering Fuel Rail (MPN: 20-1113) provides a precision-engineered solution for rotary enthusiasts looking to modernize their fuel system. This rail converts the Mazda 13B primary injector position to accept common top-feed fuel injectors, moving away from the restrictive factory side-feed setup. CNC machined for exact tolerances, the rail features a large internal bore to support high-flow demands and consistent pressure across all ports.

The kit includes specialized injector seats that install directly into the intake manifold, ensuring a leak-free seal for standard 14mm O-ring aftermarket injectors. Each end of the rail is tapped for 8AN ORB (3/4-16 O-ring) fittings, allowing for high-volume plumbing and easy integration into custom fuel loops.

• CNC machined aluminum construction for durability and high-pressure reliability
• Integrated 8AN ORB inlet and outlet ports
• Converts primary location to standard 14mm top-feed injectors
• Includes machined manifold injector seats and necessary hardware
• Compatible with common aftermarket universal fuel injectors
• Manufacturer Part Number: 20-1113

The Radium Engineering RA-Series FPR Conversion Kit (20-1101-00) allows for a seamless upgrade of any existing Radium adjustable fuel pressure regulator to the modern RA-Series configuration. This kit is designed to replace the standard adjustment screw with a knurled knob, enabling precise, tool-free fuel pressure adjustments directly at the regulator.

Constructed for durability and ease of use, the black-anodized components integrate perfectly with your existing fuel system hardware. This conversion is ideal for performance applications where rapid tuning or fuel pressure diagnostics are required without the need for hand tools. The kit includes all necessary internal and external hardware to complete the transition to the RA-style adjustment head.

• Manufacturer Part Number: 20-1101-00
• Compatibility: Fits all Radium adjustable fuel pressure regulators
• Adjustment Mechanism: Ergonomic tool-free knurled knob
• Finish: Black anodized for corrosion resistance
• Hardware: Includes all required conversion components

Fits select 2019-2025 Honda Civic models including Si and Type R. This Radium Engineering fuel hanger (20-1082) is a precision-engineered, drop-in solution designed to replace the restrictive factory fuel pump assembly while retaining the use of the OEM fuel tank.

Built for high-performance fuel demands, this hanger allows for the installation of up to three aftermarket fuel pumps. It is specifically designed to accommodate Walbro F90000267, F90000274, and F90000285 pumps, providing the necessary flow for high-horsepower applications and motorsport use.

• Manufacturer Part Number: 20-1082
• Configuration: Supports up to 3 fuel pumps
• Pump Compatibility: Walbro F90000267, F90000274, F90000285
• Installation: Drop-in design for the factory fuel tank
• Application: Ideal for forced induction or high-output builds

Fits 2022-2024 Toyota GR86 and Subaru BRZ models (Base, Premium, Limited, tS, and Special Editions). This Radium Engineering fuel hanger (MPN 20-1074) is a drop-in solution designed to replace the restrictive factory fuel pump assembly, allowing for significantly higher flow rates required for forced induction or high-output naturally aspirated builds.

CNC machined from 6061-T6 aluminum and anodized for corrosion resistance, this hanger is fully E85 compatible. It is engineered to integrate seamlessly with the OEM fuel tank, fuel level sender, and venturi pulse system to ensure proper fuel transfer between tank halves. The modular design allows for the installation of one or two high-flow aftermarket pumps depending on your fueling requirements.

• Direct drop-in fitment for 2022-2024 GR86/BRZ chassis
• Supports one or two aftermarket fuel pumps (pumps sold separately)
• CNC machined 6061 aluminum construction with FKM O-rings
• Fully compatible with E85 and other oxygenated fuels
• Maintains functionality of the factory fuel level sender
• Integrated electrical bulkhead connector for high-amperage pumps
• Manufacturer Part Number: 20-1074

Please note: Fuel pumps, plumbing kits, and electrical wiring for the pumps are sold separately.

Fits 2012-2021 Toyota GT86, Subaru BRZ, and Scion FR-S.

The Radium Engineering Fuel Hanger (MPN 20-1073) is a precision-engineered, drop-in solution for the ZN6/ZC6 fueling system. This assembly allows for a significant increase in fuel flow capacity by accommodating either one or two compatible fuel pumps within the factory fuel tank. Designed for high-performance applications, it eliminates the limitations of the OE plastic housing while maintaining compatibility with factory mounting points.

• Direct drop-in installation into the OEM fuel tank
• Full E85 and alternative fuel compatibility for modern performance tuning
• Configurable for single or dual fuel pump setups to match horsepower requirements
• Precision machined components for a leak-free, durable seal
• Manufacturer Part Number: 20-1073

Note: Fuel pumps are not included with this hanger and must be sourced separately to suit your specific flow needs.

Fits 1989-2005 Mazda MX-5 Miata (NA and NB chassis). This Radium Engineering fuel pump hanger (20-1020) provides a high-flow, drop-in solution for Mazda Miata fuel delivery systems. It replaces the restrictive factory assembly to accommodate significantly increased fuel demand for forced induction or high-performance naturally aspirated builds.

• Precision CNC machined aluminum construction for durability and fuel compatibility.
• Versatile design supports single or dual fuel pump configurations.
• Fully compatible with E85 and other alternative fuels.
• Maintains factory fuel level sender functionality and includes necessary electrical hardware.
• Manufacturer Part Number: 20-1020.

Note: Fuel pumps are sold separately and are not included with this hanger assembly.

The Radium 20-1010 In-Tank Fuel Pump Hanger is a high-performance fueling solution for the 2014-2019 Chevrolet Corvette. Designed for enthusiasts requiring more volume than the factory unit can provide, this hanger is fully compatible with E85, ethanol blends, and pump gasoline. It installs directly into the fuel tank, providing a secure mounting solution for a single aftermarket fuel pump (sold separately).

Engineered for scalability, the system can be upgraded to support a dual-pump configuration using the Radium 20-0937 expansion kit (sold separately). This modular approach allows for increased fuel delivery as your engine's power requirements grow, ensuring the fueling system remains a reliable foundation for your build.

• Fits 2014-2019 Chevrolet Corvette Stingray, Grand Sport, Z06, and ZR1 models.
• E85 and alternative fuel compatible construction.
• Designed for single aftermarket fuel pump installation (pumps not included).
• Expandable to dual pumps using kit 20-0937.
• Manufacturer Part Number: 20-1010

Vehicle Fitment

The Radium Engineering Mid Fuel Hanger for 2003-2013 Chevrolet Corvette models provides a high-performance in-tank fuel solution. This assembly is designed to replace the factory hanger to accommodate a high-flow aftermarket fuel pump, ensuring your fuel system can support increased horsepower demands. It is specifically engineered to drop into the factory fuel tank for a streamlined installation process.

Constructed with materials chosen for long-term durability and chemical resistance, this hanger is fully compatible with gasoline and E85 ethanol blends. The design facilitates efficient fuel delivery while maintaining the integrity of the vehicle's fueling system. Please note that this unit is designed for single-pump configurations and does not include the fuel pump itself.

• Fits 2003-2013 Chevrolet Corvette models
• Compatible with single aftermarket high-flow fuel pumps
• Safe for use with E85 and gasoline
• CNC machined components for precise fit and finish
• Manufacturer Part Number: 20-0980

Note: Fuel pumps are sold separately and are not included with this hanger assembly.

This Radium Engineering fuel hanger plumbing kit (MPN: 20-0966-05) provides a comprehensive fuel delivery solution for the 2013-2024 Subaru BRZ, Scion FR-S, and Toyota 86/GT86/GR86. Designed to integrate seamlessly with Radium fuel hangers, this kit replaces restrictive factory lines with high-flow plumbing to support increased fueling demands.

The system features a premium microglass fuel filter, which offers superior filtration efficiency compared to standard paper elements, protecting high-performance injectors from debris. The included adjustable fuel pressure regulator allows for precise tuning of fuel rail pressure, ensuring stable delivery under boost or high-load conditions.

• Fits 2013-2024 Subaru BRZ, Scion FR-S, and Toyota 86 / GT86 / GR86
• Includes high-flow PTFE fuel lines and AN fittings
• High-efficiency microglass fuel filter
• Adjustable fuel pressure regulator for precise tuning
• Complete installation hardware included
• Manufacturer Part Number: 20-0966-05

The Radium Engineering Fuel Hanger Plumbing Kit (20-0966-03) provides a comprehensive fuel delivery solution for the ZN6, ZC6, and ZN8 platforms. This kit is designed to bridge the gap between a Radium fuel hanger and the engine bay, replacing restrictive factory lines with high-flow components capable of supporting forced induction or high-horsepower naturally aspirated builds.

• Stainless Steel Filtration: Features a Radium fuel filter equipped with a reusable, high-flow stainless steel element for maximum debris protection and fuel compatibility.
• Adjustable Pressure Regulation: Includes a high-performance adjustable fuel pressure regulator to maintain precise rail pressure under load.
• High-Quality Plumbing: Comes with pre-assembled fuel lines and AN fittings designed for exact routing within the chassis.
• Complete Hardware Set: All necessary mounting brackets and hardware are included for a secure, professional-grade installation.
• Manufacturer Part Number: 20-0966-03

Fits select Subaru BRZ, Scion FR-S, and Toyota 86 / GR86 models.

Fits 1993-1995 Mazda RX-7 Base, R1, R2, and Touring models.

The Radium Engineering Fuel Hanger Surge Tank is a drop-in solution for the FD-generation Mazda RX-7, engineered to eliminate fuel starvation during high-G cornering and aggressive driving. This system replaces the factory fuel pump hanger, providing a high-capacity reservoir that ensures a constant supply of fuel to the engine regardless of fuel level or vehicle attitude.

This surge tank assembly is designed to accommodate multiple pump configurations and is compatible with both factory and aftermarket fuel lines, making it an essential upgrade for high-horsepower rotary builds. Please note that fuel pumps are sold separately.

• Manufacturer Part Number: 20-0952
• Compatible with Walbro F90000267, F90000274, and F90000285 fuel pumps
• Designed specifically for US-spec FD Mazda RX-7 chassis
• Eliminates starvation issues common in track and spirited driving environments
• Supports high-flow aftermarket fuel pump configurations

Fits 1993-1995 Mazda RX-7 (Base, R1, R2, and Touring).

The Radium Engineering Fuel Hanger Surge Tank (20-0950) is a precision-engineered fuel delivery solution designed specifically for the FD-generation Mazda RX-7. This drop-in assembly replaces the factory fuel pump hanger and is designed to eliminate fuel starvation during high-G cornering and hard acceleration by keeping the fuel pumps submerged in a dedicated internal reservoir.

CNC machined from aluminum and anodized for corrosion resistance, this hanger is compatible with both factory hard lines and aftermarket -AN plumbing. It provides a versatile platform that can be configured to support multiple pump setups for high-horsepower applications.

• Direct replacement for the OEM Mazda RX-7 FD fuel pump hanger
• Integrated surge tank design prevents fuel starvation at low tank levels
• Compatible with Walbro GSS342 and AEM 50-1200 fuel pumps
• Supports factory fuel lines or aftermarket plumbing via -AN fittings
• Safe for use with pump gas, race gas, and E85
• Manufacturer Part Number: 20-0950

Note: Fuel pumps are sold separately and are not included with this kit.

The Radium Engineering Fuel Hanger Feed Kit (20-0946-03) provides a high-flow plumbing solution for the Mitsubishi Evolution X. Specifically engineered for use with the Radium in-tank fuel pump hanger, this kit replaces restrictive factory lines with high-performance PTFE hoses, offering superior chemical resistance and long-term durability in demanding fuel systems.

This comprehensive kit includes a Radium in-line fuel filter equipped with a stainless steel filter element, ensuring robust filtration while maintaining high flow rates. To streamline the installation process, all PTFE hoses are pre-made to the exact required lengths and a specialized filter mounting bracket is included for a secure, professional fitment.

• Fits Mitsubishi Evolution X
• Engineered for integration with Radium in-tank fuel pump hangers
• Includes pre-cut, high-flow PTFE fuel hoses
• Features Radium in-line fuel filter with stainless steel element
• Supplied with vehicle-specific filter mounting bracket and hardware
• Manufacturer Part Number: 20-0946-03

Fits Toyota Chaser, Mark II, and Cresta (JZX chassis).

The Radium Engineering fuel pump hanger (MPN 20-0940) provides a high-performance solution for the Toyota JZX chassis, replacing the restrictive factory fuel pump assembly. This hanger is engineered to accommodate either single or dual aftermarket fuel pump configurations, allowing for a scalable fuel system that grows with your power goals.

This assembly is compatible with both factory fuel lines and aftermarket plumbing. It includes all necessary hardware for a clean integration with OEM fuel lines while offering the flexibility to run custom -AN lines for high-flow applications.

• Direct replacement for the factory fuel pump hanger assembly
• Supports one or two aftermarket fuel pumps (not included)
• CNC machined construction for precise fitment and durability
• Compatible with OEM fuel lines and aftermarket -AN lines
• Part Number: 20-0940

Fits 2003-2019 Chevrolet Corvette models currently equipped with a Radium Engineering Fuel Pump Hanger.

The Radium Engineering Mid Dual Pump Add-On Kit (20-0937) is a technical hardware solution designed for enthusiasts who need to expand their fuel system capacity as power demands increase. This kit allows for the clean integration of a second fuel pump into an existing Radium in-tank fuel pump hanger system, providing a scalable path for high-horsepower builds without requiring the purchase of a completely new hanger assembly.

• Converts existing single-pump Radium hangers to a dual-pump configuration
• Includes all necessary submersible fuel hoses and internal plumbing
• Precision-engineered mounting hardware for secure pump retention
• Maintains the functionality of the factory fuel tank and Radium hanger architecture
• Manufacturer Part Number: 20-0937

Installation Note: This is an add-on expansion kit and requires a Radium Engineering in-tank fuel pump hanger to be previously installed in the vehicle.

Fits Audi R8, Lamborghini Huracan, and Lamborghini Gallardo LP models equipped with the 5.2L V10 engine.

The Radium Engineering FHST (Fuel Hanger Surge Tank) is a precision-engineered in-tank fueling solution designed to support the increased demands of port injection. By providing a dedicated location for an additional fuel pump within the factory fuel tank, the FHST ensures consistent fuel delivery and helps prevent starvation during high-performance driving or increased power applications.

• Specifically designed for the 5.2L V10 Audi/Lamborghini platform
• Integrated in-tank surge tank design facilitates easy port injection upgrades
• Maintains reliable fuel supply for high-horsepower builds
• Constructed from high-quality, fuel-safe materials
• Note: Fuel pump is not included
• Manufacturer Part Number: 20-0860

Fits Nissan GT-R (R35) models.

The Radium Engineering Fuel Hanger Feed Kit provides a high-flow plumbing solution to connect a Radium in-tank fuel hanger directly to the engine bay rails. This kit replaces restrictive factory lines with dual -6AN feed lines to support higher horsepower applications requiring increased fuel volume. The included stainless steel fuel filter ensures debris is captured before reaching the injectors while maintaining the flow characteristics required for high-demand fuel systems.

• Manufacturer Part Number: 20-0851-03
• Dual -6AN high-flow PTFE feed lines
• Integrated stainless steel fuel filter
• Includes all necessary adapter fittings and hardware
• Designed specifically for use with Radium Engineering R35 fuel hangers

The Radium Engineering Fuel Hanger FPR Block Off is a precision-engineered solution for drivers transitioning from a returnless or internally regulated setup to a traditional return-style fuel system. This kit (MPN: 20-0806) decommissions the integrated fuel pressure regulator found within specific Radium fuel pump hangers, allowing for the use of an external, manifold-referenced regulator.

By bypassing the internal regulator, users can achieve more precise fuel pressure management, which is critical for high-horsepower builds and forced induction applications where fuel rail pressure must scale with boost. The component is designed for a direct fit, ensuring a secure, leak-free seal within the fuel assembly.

• Converts Radium fuel hangers to a return-style fuel system
• Decommissions internal built-in fuel pressure regulators
• Enables more precise fuel control via external regulators
• Precision-machined for exact fitment and reliability
• Manufacturer Part Number: 20-0806

Fits select 1992-2000 Honda Civic and 1994-2001 Acura Integra models.

The Radium Engineering Fuel Hanger (MPN 20-0792-00) is a high-performance drop-in solution designed to replace the factory unit and accommodate high-flow aftermarket fuel pumps. Engineered for enthusiasts requiring increased fuel volume, this hanger is specifically designed for use with Walbro (TI Automotive) DCSS and brushless pumps, ensuring a secure fit and optimal fuel delivery under high-demand conditions.

• CNC-machined construction for precise fitment in the factory fuel tank
• Specifically designed for Walbro F90000267, F90000274, and F90000285 fuel pumps
• Corrosion-resistant materials compatible with gasoline and E85 ethanol
• Replaces the restrictive OEM pump carrier to maximize flow potential
• Manufacturer Part Number: 20-0792-00

Fits 1992-2000 Honda Civic and 1994-2001 Acura Integra models (VTEC and non-VTEC engines).

The Radium Engineering in-tank fuel pump hanger is a high-performance upgrade designed to replace the restrictive factory assembly. It provides a secure, drop-in mounting solution for high-volume aftermarket fuel pumps, ensuring your fuel system can meet the demands of forced induction or high-horsepower naturally aspirated builds. This hanger is engineered to integrate seamlessly with the factory fuel tank while providing the flow capacity required for performance tuning.

• Specifically compatible with Walbro GSS342 and AEM 50-1000/1200 (AEM 50-12) pumps
• Replaces the OEM fuel pump hanger for improved flow and reliability
• Designed for drop-in installation into factory fuel tanks
• Compatible with gasoline and ethanol fuels
• Manufacturer Part Number: 20-0790-00

Fits select 2008-2020 Subaru Impreza, WRX, and WRX STI models.

The Radium Engineering fuel hanger is a precision-engineered drop-in replacement for the factory in-tank unit, specifically designed for high-horsepower Subaru applications. This redesigned assembly (updated for 2021) allows for the installation of one or two aftermarket fuel pumps to meet increased fueling demands. It features a single outlet design and is fully compatible with the factory fuel level sensor to ensure accurate cabin readings.

• Direct drop-in replacement for the OEM fuel hanger assembly
• Accommodates one or two aftermarket fuel pumps (pumps not included)
• Specifically designed for Walbro F90000267, F90000274, and F90000285 series
• Single outlet design for efficient fuel delivery
• Maintains full functionality of the factory fuel level sensor
• Manufacturer Part Number: 20-0782-00

Fits select 2008-2020 Subaru Impreza, WRX, and WRX STI.

This Radium Engineering fuel hanger (MPN 20-0781-00) is a high-performance, drop-in replacement for the factory in-tank unit. Specifically redesigned in 2021, this assembly facilitates the use of one or two aftermarket Deatschwerks DW400 fuel pumps to meet the high flow demands of modified EJ and FA engines. The hanger features a single outlet configuration and is engineered to retain the factory fuel level sensor, ensuring accurate dashboard readings.

• Manufacturer Part Number: 20-0781-00
• Direct drop-in replacement for the OEM Subaru fuel hanger
• Compatible with single or dual Deatschwerks DW400 fuel pumps
• Single outlet design for streamlined plumbing
• Maintains factory fuel level sensor functionality
• Updated 2021 design for optimized fitment
• Fuel pumps are not included

Fits select 2008-2020 Subaru Impreza, WRX, and WRX STI models.

This Radium Engineering fuel hanger is a drop-in replacement for the factory in-tank unit, engineered to accommodate high-flow fuel requirements for modified engines. The 2021 redesign allows for the installation of either a single pump or a dual-pump configuration to meet extreme fueling demands. This single-outlet assembly is designed to work seamlessly with the factory fuel level sensor to ensure accurate gauge readings on the dashboard.

• Compatible with Walbro GSS342 and AEM 50-1200 fuel pumps
• Supports single or dual pump configurations
• Single outlet design simplifies fuel line plumbing
• Maintains factory fuel level sensor functionality
• Redesigned version for optimized fit and performance
• Manufacturer Part Number: 20-0780-00
• Note: Fuel pumps are not included

Vehicle Fitment

Fits the 2020+ Toyota GR Supra (MK5). This Radium Engineering plumbing kit provides the necessary high-flow fuel lines to bridge the gap between the Radium fuel hanger and a port injection kit. Engineered for high-horsepower applications, this kit replaces restrictive OEM plumbing with high-volume lines and components designed for maximum reliability under pressure.

• Specifically designed to interface with Radium fuel hangers and port injection systems
• Includes a high-capacity fuel filter with a washable 10-micron stainless steel element
• PTFE fuel lines for compatibility with all fuel types, including E85
• Complete set of adapter fittings and mounting brackets for a secure installation
• Manufacturer Part Number: 20-0761-03

Each kit comes with the necessary hardware to facilitate a clean, professional install in the MK5 Supra chassis, ensuring consistent fuel delivery for boosted or modified engines.

The Radium Engineering Fuel Hanger (MPN: 20-0760) is a precision-engineered, drop-in replacement for the factory fuel pump assembly in the Toyota MK5 Supra. This high-performance hanger is designed to facilitate the addition of a secondary fuel pump, making it an essential component for owners installing port injection systems to support higher horsepower levels.

• Direct drop-in fitment for the Toyota MK5 Supra fuel tank using factory mounting points.
• CNC machined aluminum construction with an anodized finish for E85 and fuel compatibility.
• Integrated ports designed to support a secondary fuel pump for port injection setups.
• Maintains functionality of the OE fuel level sender and internal baffling.
• Includes high-quality electrical connectors and internal plumbing for a secure installation.

Note: This product consists of the fuel hanger assembly and installation hardware only. Fuel pumps are not included and must be sourced separately to match your specific flow requirements.