The Fleece Performance PowerFlo Lift Pump is a comprehensive fuel system upgrade designed for 1991-1993 Dodge D250 and D350 models (5.9L). This in-tank assembly replaces the factory sending unit and eliminates the need for external sumps or draw straws, effectively solving the common 1/4 tank fuel starvation issues encountered with high-flow fuel systems.

Engineered to support up to 800 hp, the PowerFlo utilizes a dual gerotor pump design to increase flow capacity and improve reliability over the factory configuration. This unit is a direct OEM-style fitment, requiring no drilling or cutting of the fuel tank. The kit includes a fuel gauge sending unit and float to restore accurate dashboard readings, along with a mechanical pump block-off plate for a clean installation.

• Direct in-tank fitment with active fill bucket technology
• Dual gerotor pumps supporting up to 800 hp
• Includes new fuel sending unit and float
• 16 feet of push-lock hose and necessary AN/barb fittings
• Mechanical fuel pump block-off plate (FPE-CUMM-FBOP) included
• Wiring harness, fuse taps, and flange tank seal included
• Manufacturer Part Number: FPE-PF-CUMM-9197

Fits 2011-2024 Dodge Ram 4500 and 5500 Cab & Chassis models equipped with the 6.7L Cummins diesel engine and 52-gallon over-axle rear tank.

The Fleece Performance PowerFlo Lift Pump is a direct-fit, in-tank performance upgrade designed to replace the failure-prone factory pump. Unlike external lift pumps that require cutting fuel lines or installing noisy frameside brackets, the PowerFlo installs directly into the fuel tank in a fraction of the time. This unit features a dual gerotor design, providing two OEM-quality pumps in a single assembly for increased flow capacity and redundancy, capable of supporting up to 800 horsepower.

The PowerFlo utilizes an active fill bucket to eliminate the need for tank sumps or draw straws, effectively solving the "1/4 tank" fuel starvation issues common with other high-flow systems. It maintains full compatibility with your factory water-in-fuel sensors, fuel heaters, and fuel lines. For those with custom plumbing needs, the outlet and return ports are threaded for -8 O-ring fittings (3/4"-16 thread).

• Direct OEM in-tank replacement for simple, clean installation.
• Dual gerotor pump design supports up to 800 hp.
• Maintains factory fuel heater and water-in-fuel (WIF) sensor functionality.
• Operating Pressure: 18-20 psi at idle.
• B20 Biodiesel compatible (up to 20%).
• Replaces OEM part number: 68064420AA.
• Manufacturer Part Number: FPE-PF-CUMM-1124-CCOA.

Fits 2011-2024 Ram 4500 and 5500 Cab & Chassis models equipped with the 22-gallon midship fuel tank.

The Fleece Performance PowerFlo Lift Pump is a high-performance, in-tank replacement designed to provide increased fuel flow and reliability without the complexities of traditional aftermarket systems. Featuring a dual gerotor pump design, this unit increases flow capacity enough to support up to 800 hp while offering redundant reliability. Unlike external pumps, the PowerFlo utilizes an active fill bucket, which eliminates the need for tank sumps or draw straws and prevents the common "1/4 tank" fuel starvation issues seen in modified diesel applications.

This pump is engineered for seamless integration, retaining your factory water-in-fuel (WIF) sensor, fuel heaters, and fuel lines for a clean, OEM-style installation. For those running custom setups, the pump outlet and return ports are threaded to accept -8 O-ring fittings (3/4"-16 thread), making it compatible with aftermarket fuel lines and filtration systems.

• Direct OEM in-tank replacement
• Dual gerotor pump design for increased flow and reliability
• Supports up to 800 hp
• Operating Pressure: 18-20 psi at idle
• Threaded -8 O-ring outlet and return (3/4"-16 thread)
• Validated for use with up to 20% biodiesel (B20)
• Replaces OEM Part Number: 68064422AB
• Manufacturer Part Number: FPE-PF-CUMM-1124-CCMS

Fits select 2001-2016 Chevrolet Silverado and GMC Sierra 2500 HD and 3500 models with Duramax diesel engines.

When upgrading to an aftermarket positive displacement lift pump like the Fleece PowerFlo, the factory fuel primer bulb becomes a redundant component and a common source of air leaks in the fuel system. The Fleece Performance Fuel Primer Bulb Sealing Kit allows you to eliminate this failure point entirely, streamlining your fuel delivery path for better reliability.

The kit features a precision-machined sealing cap equipped with an integrated 1/8" NPT port. This provides a convenient location to plumb a low-pressure fuel gauge for monitoring your lift pump performance, or it can be sealed using the included NPT plug. This is an essential modification for Duramax owners seeking a more robust fuel system architecture.

• Replaces the leak-prone factory primer bulb
• Includes integrated 1/8" NPT port for fuel pressure monitoring
• Machined for a precise seal on factory mounting points
• Compatible with aftermarket lift pump installations
• Manufacturer Part Number: FPE-GM-FFPD-0116

Kit Includes: Fuel primer cap, 1/8" NPT plug, required fasteners, and installation instructions.

Fits 2007-2010 Chevrolet Silverado and GMC Sierra 2500 HD and 3500 HD trucks.

The Fleece Performance PowerFlo Lift Pump (FPE-34790) is the ultimate in-tank fueling solution for diesel owners seeking high-flow performance without the drawbacks of external pump systems. Designed to support up to 800 hp, including dual CP3 configurations, this lift pump features an active fill bucket that eliminates the need for tank sumps or draw straws. This design effectively resolves the common 1/4 tank fuel starvation issues often found with other high-performance fueling setups.

This direct OEM replacement utilizes dual OEM-quality gerotor pumps to provide superior flow capacity and built-in redundancy for long-term reliability. Unlike external pumps that require extensive modifications, the PowerFlo retains your factory fuel lines, fuel heater, and water-in-fuel (WIF) sensor. For those building custom setups, the pump outlet and return are threaded to accept -8 O-ring fittings (3/4"-16 thread) for easy adaptation to aftermarket lines.

• Direct in-tank replacement supports up to 800 hp
• Dual gerotor pump design for increased reliability and volume
• Active fill bucket prevents fuel starvation at low tank levels
• Retains factory fuel heater, WIF sensor, and quick-connect lines
• Ports threaded for -8 O-ring fittings (3/4"-16)
• Significantly faster installation than frame-mounted alternatives
• Manufacturer Part Number: FPE-34790
• Backed by a Limited Lifetime Warranty

Fits select 2004.5-2007 Chevrolet Silverado and GMC Sierra 2500 HD/3500 models, including Classic editions.

The Fleece Performance PowerFlo In-Tank Lift Pump is a drop-in replacement designed to support up to 800 hp without the need for noisy external pumps or invasive fuel tank modifications. Featuring a dual gerotor design, this assembly increases flow capacity and provides built-in redundancy for superior reliability. The active fill bucket technology ensures the pump remains submerged in fuel, effectively eliminating the common "1/4 tank" fuel starvation issues associated with draw straws and aftermarket sumps.

Installation is straightforward, retaining your factory fuel lines, water-in-fuel (WIF) sensor, and fuel heater while cutting installation time in half compared to traditional high-flow systems. For those running custom fuel systems, the pump outlet and return are threaded to accept -8 O-ring fittings (3/4"-16 thread) for maximum versatility.

• Direct OEM in-tank replacement
• Dual gerotor pump design for increased flow and reliability
• Supports up to 800 hp, including dual CP3 configurations
• Eliminates the need for tank sumps or draw straws
• Retains factory fuel heater and WIF sensor
• Threaded -8 ORB outlet and return for aftermarket compatibility
• Manufacturer Part Number: FPE-34789
• Manufacturer Lifetime Warranty

Fits 2003-2004 Dodge Ram 2500 and 3500 models equipped with the Cummins diesel engine.

The Fleece Performance Fuel System Upgrade Kit is a comprehensive solution for 2003-2004 Dodge Cummins owners looking to enhance fuel delivery and reliability. This kit replaces the factory fuel supply system with high-performance components designed to support up to 800 hp, including dual CP3 configurations. At the heart of the system is the PowerFlo Lift Pump, which features a dual gerotor design for increased flow capacity and a built-in sending unit and float to restore accurate fuel gauge functionality. The active fill bucket technology eliminates common fuel starvation problems, such as the 1/4 tank issue, without requiring draw straws or tank sumps.

• PowerFlo Lift Pump: Direct-fit in-tank pump with dual gerotor technology and limited lifetime warranty.
• Filtration: Includes a Donaldson 3-micron fuel filter and water separator (P/N P553207) for superior engine protection.
• Installation: Bolt-on design requires no drilling or cutting of the fuel tank; includes push-lock hose and AN/barb fittings.
• Fuel Filter Delete: Includes FPE-FFD-RO-3G to bypass the restrictive factory filter housing.
• Kit Components: PowerFlo Lift Pump, filter base with mounting hardware, distribution filter block, and all necessary plumbing.

Fits 1998-2002 Dodge Ram 2500 and 3500 Base models with the 5.9L Cummins engine.

The Fleece Performance PowerFlo Lift Pump and Fuel System Upgrade Kit is a comprehensive solution for the 1998.5-2002 Dodge Cummins VP44 fuel system. This all-in-one kit replaces restrictive factory plumbing and unreliable pumps with a high-performance, in-tank dual gerotor system capable of supporting up to 800 hp. Unlike aftermarket frame-mounted pumps, the PowerFlo requires no drilling, cutting, or external sumps, and its active fill bucket design eliminates the common 1/4-tank fuel starvation issues encountered with draw straws.

This kit restores accuracy to your dash with a new integrated fuel sending unit and float. For engine protection, the system includes a Donaldson 3-micron fuel filter and water separator mounted to a heavy-duty distribution block with integral mounting points.

• 800 HP Support: Dual gerotor pump design provides high flow capacity and reliability for performance builds, including dual CP3 configurations.
• Direct In-Tank Fitment: Replaces the OEM assembly without tank modifications; installs in significantly less time than traditional high-flow pumps.
• Complete Filtration System: Features a Donaldson 3-micron fuel filter/water separator and a distribution filter block with Push Lock hoses and AN fittings.
• Integrated Fuel Sender: Includes a new float and sending unit to resolve non-functional fuel gauges.
• Application Note: 1998.5-1999 model years require a chassis-side fuel heater connector pigtail (FPE-HAR-CUMM-FH-PT, sold separately).

• Manufacturer Part Number: FPE-34754
• Filter Rating: 3 Micron
• Pump Style: Dual Gerotor In-Tank

Fits select 2011-2013 Chevrolet Silverado 3500 HD (6.6L) pickup trucks with a long bed (8') and single fuel tank configuration.

The Fleece Performance PowerFlo in-tank lift pump (FPE-34564) is a high-performance OEM replacement designed to protect your LML Duramax's fuel system. Factory 2011-2013 LML engines rely on the CP4 injection pump to pull fuel from the tank under vacuum, which increases strain and risks premature pump failure. The PowerFlo provides positive fuel pressure to the CP4, reducing stress and supporting performance builds up to 800 hp, including dual CP3 configurations.

Built for reliability and ease of installation, this lift pump features a dual gerotor design and an active fill bucket that eliminates common 1/4-tank fuel starvation issues without needing tank sumps or draw straws. It installs directly into the factory location, retaining original fuel lines while offering the flexibility to run aftermarket lines via threaded ports.

• Manufacturer Part Number: FPE-34564
• Dual Gerotor Pump: Increases flow capacity and reliability
• Capacity: Supports up to 800 hp
• Active Fill Bucket: Prevents 1/4-tank fuel starvation
• Fitting Ports: Threaded for -8 O-ring fittings (3/4"-16 thread)
• Installation: Direct OEM in-tank replacement
• US Patent No. D910,081

Fits select 2011-2016 Chevrolet Silverado and GMC Sierra 2500 HD and 3500 HD trucks (6.6L LML Duramax) with a 6.5' short bed.

The Fleece Performance PowerFlo lift pump is a high-performance in-tank solution designed to protect and optimize your LML Duramax fuel system. From the factory, the LML relies on the CP4 injection pump to pull fuel from the tank under vacuum, which increases stress on the pump and leads to premature failure. The PowerFlo provides positive fuel pressure to the CP4, significantly reducing strain while supporting up to 800 hp, including dual CP3 configurations.

Equipped with an active fill bucket, this assembly eliminates common high-flow fuel system issues like 1/4 tank starvation without requiring tank sumps or draw straws. The dual gerotor pump design ensures maximum reliability and flow capacity while maintaining a quiet, OEM-level operation. For custom setups, the pump outlet and return are threaded to accept -8 O-ring fittings (3/4"-16 thread).

• Direct OEM in-tank replacement utilizing factory fuel lines
• Dual gerotor pump design for increased flow and reliability
• Capable of supporting up to 800 hp
• Active fill bucket prevents 1/4 tank fuel starvation
• Threaded outlet/return: -8 O-ring (3/4"-16 thread)
• Manufacturer Part Number: FPE-34563
• US Patent No. D910,081

Fits select 2011-2024 Ram 2500 and 3500 models.

The Fleece Performance PowerFlo Lift Pump is a high-performance, in-tank replacement for your Ram truck's fuel system. Engineered as a drop-in solution, this assembly utilizes a dual gerotor design to significantly increase flow capacity and reliability, supporting power levels up to 800 hp—including dual CP3 configurations. Unlike traditional high-flow pumps, the PowerFlo integrates an active fill bucket, which eliminates the need for tank sumps or draw straws and prevents common 1/4-tank fuel starvation issues.

• Direct in-tank replacement: Retains factory fuel lines, fuel heater, and water-in-fuel sensor.
• Dual Gerotor Pumps: Increases flow and reliability over the factory unit.
• Aftermarket Ready: Outlet and return ports are threaded for -8 O-ring fittings (3/4"-16 thread) for use with custom fuel systems.
• Seamless Integration: Active fill bucket eliminates the need for additional air filtration or draw straws.
• Manufacturer Part Number: FPE-34562
• Replaces OE Part Number: 5145571AA

Note: This pump is not compatible with 2020 and newer models equipped with the factory 50-gallon fuel tank option. It is not for use in Cab & Chassis applications.

Fits 2010 Dodge Ram 2500 and 3500 models.

The PowerFlo Lift Pump by Fleece Performance is a direct in-tank replacement designed for 2010 Dodge Ram trucks. Engineering a solution to the common limitations of factory units, the PowerFlo uses a dual gerotor pump design that provides enough flow to support up to 800 hp, including demanding dual CP3 configurations. Unlike traditional high-flow systems, this assembly utilizes an active fill bucket to eliminate "1/4 tank issues" and the need for tank sumps or draw straws.

Installation is streamlined, as the PowerFlo retains the factory water-in-fuel (WIF) sensor, fuel heater, and fuel lines. For those building custom fuel systems, the pump outlet and return are threaded to accept -8 O-ring fittings (3/4"-16 thread). This assembly offers the reliability of OEM-quality components with the flow required for high-performance diesel builds.

• Direct OEM in-tank replacement installs in half the time of external pumps
• Dual gerotor design for increased flow and redundancy
• Supports up to 800 hp and dual CP3 setups
• Eliminates the need for tank sumps or additional air filtration
• Threaded outlet/return for -8 O-ring fitting compatibility
• Replaces OE part number: 68084965AB
• Manufacturer Part Number: FPE-34561

Note: Not compatible with Cab & Chassis applications.

Fits select 2005-2009 Dodge Ram 2500 and 3500 models.

The PowerFlo Lift Pump from Fleece Performance is the ultimate in-tank fueling solution for the 5.9L and 6.7L Cummins. Designed as a direct OEM replacement, this assembly is the only in-tank lift pump capable of supporting up to 800 hp, including demanding dual CP3 configurations. By utilizing an active fill bucket, the PowerFlo eliminates the common 1/4-tank fuel starvation issues associated with draw straws and fuel tank sumps, ensuring your engine gets the volume it needs without requiring additional air filtration or external plumbing.

Built with a dual gerotor design, this assembly provides increased flow capacity and redundancy over the factory unit. It retains all critical factory components, including the water-in-fuel (WIF) sensor, fuel heater, and factory fuel lines, for a clean installation that takes significantly less time than frame-mounted alternatives. For those running custom setups, the pump outlet and return are threaded to accept -8 O-ring fittings (3/4"-16 thread) for seamless aftermarket integration.

• Manufacturer Part Number: FPE-34560
• Supports up to 800 hp
• Dual gerotor pump design for increased reliability
• Active fill bucket eliminates 1/4-tank issues
• Direct in-tank replacement; no sumps or draw straws required
• Compatible with factory fuel lines, heater, and WIF sensor
• Threaded outlet/return: -8 AN O-ring (3/4"-16 thread)
• Replaces OE Part Number: RL143160AB

Fits 1989-1993 Nissan 240SX (Base, LE, SE, XE).

The DeatschWerks X1 Series Fuel Pump Module provides a modern, high-performance fueling solution for the 1989-1993 Nissan S-Chassis and R32 platforms. This module is engineered to replace the entire factory hanger assembly, eliminating common failure points such as restrictive hardlines and aged electrical connectors. This drop-in unit comes pre-equipped with the high-output DW300 in-tank fuel pump, providing the reliability and flow necessary for forced induction or high-horsepower naturally aspirated builds.

• Includes high-flow DeatschWerks DW300 in-tank fuel pump
• Complete drop-in module replaces the factory fuel hanger and bracketry
• Addresses electrical and flow limitations of the original OE assembly
• Built with corrosion-resistant materials for long-term durability
• Manufacturer Part Number: 9-301-7020

Fits 1989-1993 Nissan 240SX (Base, LE, SE, XE).

The DeatschWerks X1 Series Fuel Pump Module provides a complete, drop-in fueling solution for the S13 chassis Nissan 240SX. This assembly replaces the entire factory fuel hanger, eliminating the common issues associated with aging, corroded OEM components while significantly increasing fuel flow capacity. Engineered for a seamless installation, the module integrates directly with factory fuel lines and electrical connectors.

• Complete X1 Series fuel pump module assembly
• Includes pre-installed high-flow DeatschWerks DW200 fuel pump
• Direct replacement for the restrictive OE fuel pump hanger
• Maintains factory fitment and mounting points for ease of installation
• Compatible with factory wiring and plumbing
• Manufacturer Part Number: 9-201-7020

Fits 1989-1993 Nissan 240SX (Base, LE, SE, XE).

The DeatschWerks X1 Series Fuel Pump Module (9-000-7020) is a high-performance replacement for the factory fuel hanger assembly. Designed to drop into the OE fuel tank, this module provides a secure mounting point for fuel pumps while ensuring reliable fuel delivery for tuned or modified S13 chassis vehicles. Please note this SKU includes the module and installation hardware only; the fuel pump is sold separately.

• Manufacturer Part Number: 9-000-7020
• Product Series: X1 Series
• Compatibility: 1989-1993 Nissan 240SX
• Configuration: Module assembly only (pump not included)
• Drop-in fitment for the factory fuel tank