Fits select 1971-1990 Jeep CJ5, CJ6, CJ7, Scrambler, Wrangler YJ, Cherokee, Wagoneer, and J-Series trucks equipped with 3.8L or 4.2L 6-cylinder engines.

This Omix exhaust donut gasket is engineered to restore a secure, leak-free seal between the exhaust manifold and the head pipe. Designed to meet or exceed factory standards, this direct-fit replacement addresses the common issue of exhaust leaks at the flange, which can lead to increased engine noise and reduced performance. The gasket is manufactured from a durable, heat-resistant composite material specifically designed to withstand the extreme thermal stress of the exhaust system.

• Direct replacement for OE part number 3216643
• Composite construction for maximum heat resistance and durability
• Precision-engineered for a factory-style fit and seal
• Designed for 6-cylinder 3.8L and 4.2L Jeep engines
• Manufacturer Part Number: 17450.02
• Limited 5-year warranty provided by Omix

Fits 1942-1953 Willys and Jeep models equipped with the 134 ci L-Head engine, including MB, CJ-2, CJ-3, M38, M38A1, and Willys Trucks.

This Omix engine gasket set provides everything required for a complete top-to-bottom engine rebuild. Designed to meet or exceed factory specifications, this kit ensures a reliable seal for the 134 ci L-Head (Go Devil) engine. It is an OE-style direct replacement that simplifies the restoration or maintenance of vintage Jeep drivetrains by grouping all necessary components into a single part number.

• Complete kit for full engine service
• Includes crankshaft seal
• Direct fit OE-style replacement
• Fits 134 cubic inch L-Head engines
• Replaces OE part number: 810584
• Manufacturer Part Number: 17440.01
• Limited 5-year warranty

Fits select 1968-2006 Jeep CJ, Wrangler, Cherokee, Grand Cherokee, Comanche, Wagoneer, and J-Series trucks equipped with 4.0L or 4.2L engines.

Maintain a leak-free engine with this Omix direct-fit replacement oil pan gasket. Designed to meet or exceed original equipment standards, this gasket provides a reliable seal for the high-mileage 4.0L and 4.2L inline-six engines common in classic Jeeps. Unlike multi-piece cork or paper gaskets that are prone to shifting during installation, this one-piece molded rubber design ensures precise alignment and superior durability against heat and oil saturation.

• Direct-fit replacement for factory part number 53007568
• One-piece molded rubber construction prevents leaks and simplifies installation
• Engineered for 4.0L and 4.2L (258 CID) inline-six engines
• Maintains critical engine lubrication by securing the oil pan interface
• Manufacturer Part Number: 17439.06
• Limited 5-Year Warranty

Fits 2007-2011 Jeep Wrangler and Wrangler Unlimited (3.8L).

The Omix Thermostat Seal is a direct-replacement cooling system component engineered to maintain a leak-proof seal between the thermostat and the housing. Designed to meet or exceed factory specifications, this seal prevents coolant loss and helps maintain proper system pressure, ensuring your engine operates within the correct temperature range.

• Direct replacement for a precise, factory-style fit
• Replaces OE part number 4781674AA
• Manufacturer Part Number: 17117.34
• Specifically designed for the 3.8L V6 engine

Whether you are performing a routine coolant flush or replacing a failed thermostat, a fresh seal is critical to prevent leaks. This component is recommended for use with a 195-degree thermostat, such as Omix part number 17106.06.

Fits select 1946-1986 Jeep Willys, CJ-2, CJ-3, CJ-5, CJ-6, CJ-7, and Scrambler (Select Submodels).

Maintain the integrity of your drivetrain with this Omix axle flange gasket. Designed as a direct-fit replacement for the original equipment, this gasket ensures a tight seal between the axle flange and the hub or housing, preventing critical gear oil leaks that can lead to premature component wear. It is specifically engineered for Dana 25, Dana 27, and Dana 30 front differentials equipped with 6-bolt hubs, and it also fits Dana 25 full-floating rear axles.

As an OE-style replacement, it matches the factory tolerances and material specifications required for vintage Willys and classic CJ-series restorations. Sold individually, this gasket is essential for any service involving axle shaft removal or hub maintenance.

• Replaces OE part number: 649784
• Manufacturer Part Number: 16727.02
• Hub Pattern: 6-bolt
• Differential Compatibility: Dana 25, Dana 27, Dana 30
• Installation: Replaces worn or damaged factory gaskets
• Warranty: Limited 5-year manufacturer warranty

Fits select 1972-2006 Jeep CJ5, CJ6, CJ7, Scrambler, Cherokee XJ, Wrangler YJ/TJ/LJ, and Grand Cherokee ZJ models with a Dana 30 front axle.

This Omix inner axle oil seal is a direct replacement for worn or leaking factory seals. Designed to keep differential gear oil contained within the housing and out of the axle tubes, this seal is essential during axle shaft maintenance or differential overhauls. Precision-engineered to OE specifications, it features a durable construction to withstand the rotating friction of the 27-spline axle shafts.

• Fits front Dana 30 27-spline axles
• Inside Diameter: 1.125 inches
• Outside Diameter: 2.132 inches
• Replaces OE part number 8121781
• Fits either left or right side (two required per vehicle)
• Sold individually
• Manufacturer Part Number: 16526.02
• Limited 5-year manufacturer warranty

Fits select 1984-2007 Jeep Cherokee, Comanche, Grand Cherokee, Grand Wagoneer, Liberty, Wagoneer, and Wrangler models equipped with a Dana 35 rear differential.

This Omix differential cover gasket is a direct-fit replacement designed to restore a leak-free seal on your vehicle's Dana 35 axle housing. Manufactured from high-quality rubber to match OE specifications, this gasket provides a reliable alternative to liquid RTV silicone, ensuring a cleaner installation and easier future maintenance during gear oil changes.

• Engineered specifically for Dana 35 rear differentials
• Direct replacement for OE part number 3229429
• Constructed from durable rubber for a precise, OE-style seal
• Simplifies differential service by eliminating the need for sealant cure time
• Limited 5-year manufacturer warranty
• Sold individually
• Manufacturer Part Number: 16502.04

Fits select 1976-1986 Jeep CJ5, CJ7, and Scrambler models equipped with an AMC Model 20 rear differential.

Maintain a leak-free seal on your Jeep's rear axle with this direct-fit differential cover gasket from Omix. Engineered as an OE-style replacement for worn or brittle gaskets, this component is essential for routine differential service or axle repairs. It is constructed from durable rubber to provide a reliable seal against the differential housing, preventing gear oil loss and protecting your drivetrain internals.

Omix replacement parts are designed to meet or exceed original equipment standards, ensuring proper fitment and performance for vintage Jeep restoration and maintenance. This gasket replaces factory part number 3172122 and is sold individually.

• Fits AMC Model 20 rear differentials
• Constructed from high-quality rubber for a secure seal
• Direct replacement for OE part number 3172122
• Manufacturer Part Number: 16502.03
• Backed by a Limited 5-Year Warranty

Fits 2011-2014 Jeep Wrangler JK and Wrangler Unlimited models (Rubicon, Sahara, Sport, and 70th Anniversary) equipped with factory hardtops.

Keep your cabin dry and quiet with the Omix Foam Blocker Seal Kit. This OE-style replacement kit is engineered to restore the weather-tight seal on your Jeep's factory hardtop, effectively addressing common air and water leaks. Precision-cut from high-quality foam materials, these seals fit specific body and top contact points to ensure a factory-grade seal between the roof panels and the vehicle body.

• Direct replacement for OE part number 68026937AB
• Restores factory sealing performance to eliminate wind noise and moisture intrusion
• Designed specifically for the 2011-2014 Jeep Wrangler JK hardtop configuration
• Complete kit includes all necessary foam blocker components for a thorough repair
• Manufacturer Part Number: 13510.70
• Limited 5-Year Warranty

Fits 2007-2018 Jeep Wrangler and Wrangler JK models equipped with full steel doors.

Exposure to the elements and frequent use eventually degrade factory weatherstripping, resulting in cabin drafts, wind noise, and moisture intrusion. This Omix front driver side (LH) full door seal provides an OE-style replacement to restore the original weather-tight barrier of your Jeep. Engineered for a precise fit on the factory steel door frame, this seal helps maintain a quiet interior and protects against water damage.

• Position: Front Left (Driver Side)
• Application: Models with full steel doors only
• Installation: Direct-fit OE replacement
• Interchange: Replaces OE 55395275AU
• Manufacturer Part Number: 12303.22
• Warranty: Limited 5-Year Warranty

For the matching passenger side (RH) front door seal, see Omix part number 12303.21.

Fits 2007-2018 Jeep Wrangler and Wrangler JK models including Rubicon, Sahara, Sport, and Unlimited.

Restore the weather-tight integrity of your vehicle with this Omix replacement front passenger side (RH) full door seal. Over time, factory weatherstripping can become brittle, compressed, or torn, leading to annoying wind whistle and water leaks during rain or car washes. This seal is engineered to OE specifications to provide a factory-quality fit and seal specifically for models equipped with full steel doors.

• Direct-fit replacement for a straightforward installation
• OE Style design matches factory appearance and function
• Engineered for passenger side (RH) front doors
• Replaces OE part number: 55395274AU
• Manufacturer Part Number: 12303.21
• Limited 5-Year Warranty

Note: Designed for full steel door models only. For the matching driver side (LH) seal, use Omix part number 12303.22.

Fits 1987-1995 Jeep Wrangler YJ models equipped with full steel doors.

This Omix outer door glass seal is a direct-fit replacement for the driver side of your Wrangler YJ. Engineered to restore the original weather-tight seal between the exterior door panel and the window glass, this rubber seal prevents water, debris, and wind noise from entering the door cavity. Maintaining a proper seal is essential for protecting internal door components, such as the window regulator and lock actuators, from corrosion and moisture damage.

• Position: Left (Driver Side)
• Material: High-quality weather-resistant rubber
• Design: OE Style direct fit
• Compatibility: For models with full steel doors only
• Replaces OE Number: 55024255
• Manufacturer Part Number: 12303.07
• Warranty: Limited 5-year warranty

For the passenger (right) side seal, please see Omix part number 12303.06.

Fits 2007-2018 Jeep Wrangler JK, Wrangler JK Unlimited, and various submodels including Rubicon, Sahara, Sport, and X.

Restore the weather-tight seal on your Jeep with this Omix windshield frame to header weatherstrip. Designed as a direct OE-style replacement, this seal prevents wind noise and water intrusion where the windshield meets the soft or hard top header. It features a pre-applied, automotive-grade double-sided adhesive backing for a secure bond during installation.

• Direct fit replacement for OE part 55397454AM
• Constructed from high-quality rubber to meet or exceed factory specifications
• Includes double-sided adhesive backing
• Requires 2 rivets for complete installation (not included)
• Manufacturer Part Number: 12302.14
• Limited 5-Year Manufacturer Warranty

Note: For the matching windshield frame to cowl weatherstrip, please see part number 12302.15.

Fits 1997-2006 Jeep Wrangler TJ models including Sport, SE, Sahara, Rubicon, X, and Unlimited.

Restore the weather-tight seal of your TJ with this Omix windshield frame to cowl weatherstrip. Designed to meet OE specifications, this direct-fit replacement seal prevents water intrusion and wind noise at the critical junction between the hood and the windshield frame. Built from durable, high-quality rubber, it maintains its flexibility and sealing properties even after years of exposure to the elements.

• Direct fit replacement for a factory-correct installation
• Constructed from OE-grade rubber for lasting durability
• Replaces OE part number: 55174640AE
• Manufacturer Part Number: 12302.11
• Engineered specifically for the TJ chassis

Fits 1997-2002 Jeep Wrangler Sahara, SE, Sport, and X.

Restore your vehicle's weather-tight integrity with this Omix windshield frame to cowl seal. Over time, factory rubber seals become brittle, crack, or compress, which leads to annoying dash rattles, excessive wind noise at highway speeds, and moisture intrusion that can damage interior components. This direct-fit replacement is engineered to original equipment specifications, providing a reliable barrier between the windshield frame and the body cowl.

• Direct-fit OE style replacement for a precise seal
• Constructed from high-quality molded rubber for long-term durability
• Eliminates rattling, wind noise, and water leaks
• Replaces OE part number: 55176566AE
• Manufacturer Part Number: 12302.05

Fits all 1987-1995 Jeep Wrangler YJ models including Base, Sahara, Laredo, Renegade, and Sport.

Restore the weather-tight seal on your Jeep with this Omix windshield frame to cowl weatherstrip. Designed as a direct fit replacement for worn or dry-rotted factory seals, this OE-style rubber gasket prevents water intrusion and reduces cabin wind noise. This essential component installs between the bottom of the windshield frame and the top of the cowl to protect your interior from water damage and eliminate rattling at highway speeds.

• Direct fit replacement for OE 55009127
• High-quality rubber construction for long-term weather resistance
• Eliminates wind noise, rattling, and potential water damage
• OE-style design for a factory-correct fit and appearance
• Manufacturer Part Number: 12302.04

Fits 1976-1986 Jeep CJ5, CJ7, and Scrambler models. This Omix windshield frame to cowl weatherstrip is an OE-style replacement designed to restore the critical seal between the windshield frame and the vehicle body. Over time, original rubber seals dry out and crack, leading to cabin leaks, excessive wind noise, and annoying dashboard rattles. This direct-fit replacement ensures a weather-tight bond to protect your interior from water damage and improve overall cabin comfort.

• Direct fit for easy installation using factory mounting points
• Manufactured from high-quality rubber for long-term durability and flexibility
• Restores OE appearance and sealing performance
• Eliminates wind noise and rattling at the cowl interface
• Replaces original equipment part number 5453950

Specifications:

• Brand: Omix
• Manufacturer Part Number: 12302.03
• OE Reference: 5453950
• Material: Rubber
• Application: Windshield Frame to Cowl

Fits 1955-1975 Jeep CJ5 and Willys CJ-5 models. This Omix windshield frame to cowl weatherstrip is an OE-style replacement designed to restore the critical seal between your Jeep's folding windshield and the body tub cowl.

Constructed from high-quality rubber to match original factory specifications, this direct-fit gasket solves common issues like cabin wind noise, dashboard rattling, and water intrusion that can damage floor pans and electrical components. This seal is an essential part of any restoration or maintenance project for early CJ models.

• Direct-fit OE style replacement for 1955-1975 CJ5 and Willys CJ-5
• Constructed from durable, weather-resistant rubber
• Overall Length: 58.75 inches
• Eliminates rattling, wind noise, and water leaks
• Replaces OE Part Number: 989844
• Manufacturer Part Number: 12302.02

Fits select 1987-1995 Jeep Wrangler (YJ) models including Base, Laredo, Islander, Renegade, Rio Grande, S, Sahara, SE, and Sport.

Maintain the weather-tight integrity of your YJ with this Omix windshield outer seal. This OE-quality replacement serves a dual purpose as both an outer weather seal and a lock strip for the windshield glass. Constructed from durable rubber to match factory specifications, it helps eliminate wind noise, rattling, and water intrusion caused by dried-out or cracked original seals. This direct-fit component ensures your Jeep remains protected from the elements while maintaining its classic look.

• Direct-fit OE style replacement for a precise installation
• Functions as both an outer seal and lock strip for the windshield
• Constructed from high-quality rubber for long-term weather resistance
• Includes the necessary connector clip for a complete installation
• Replaces original equipment part number 55134655

Note: For a complete windshield overhaul, use Omix part number 12301.05 for the inner windshield seal.

• Brand: Omix
• MPN: 12301.06
• Material: Rubber
• Position: Windshield (Outer)
• Included Hardware: Connector Clip

Fits 1976-1986 Jeep CJ5, CJ7, and Scrambler (CJ8) models.

This Omix windshield glass seal is a direct-fit replacement engineered to restore a weather-tight seal between your glass and the windshield frame. Over time, original factory weatherstripping can dry out, crack, or shrink, leading to frustrating cabin leaks and wind noise. This OE-style rubber seal provides a precise fit to eliminate rattling and prevent water damage to your interior and dash components.

Constructed from high-quality rubber, this seal is designed to meet or exceed original equipment standards for durability and fitment, making it an essential component for any restoration or maintenance project on classic CJ-series vehicles.

• Direct-fit replacement for a proper seal between glass and frame
• Manufactured from durable, OE-style rubber
• Eliminates wind noise, rattling, and water intrusion
• Replaces OE part number: 5453949
• Manufacturer Part Number: 12301.04

Fits 1949-1975 Jeep Willys and CJ-3, CJ-5, and CJ-6 models.

Restore the weather-tight integrity of your classic Jeep with the Omix windshield glass seal. This direct-fit replacement is engineered to seal the windshield glass securely to the windshield frame, addressing common issues like water intrusion, cabin wind noise, and glass rattling. By replacing a brittle or cracked OE seal, you protect your interior from potential water damage and ensure a quieter ride.

Crafted from durable, weather-resistant rubber, this seal maintains its flexibility and profile over time for a consistent seal. It is designed as an OE-style component to maintain the original appearance of your vintage Willys or CJ-series vehicle while providing a modern solution to aging rubber components.

• Direct fit for easy installation between glass and frame
• Eliminates rattling, wind noise, and water leaks
• Constructed from high-quality rubber for long-term durability
• Replaces OE part number 978995K
• Manufacturer Part Number: 12301.03

Fits Acura and Honda vehicles equipped with B-Series (B16, B17, B18, B20) engines.

The Moroso 93200 Heavy Duty Rubber Oil Pan Gasket provides a superior sealing solution for high-performance Honda and Acura engines. Designed to replace standard multi-piece or cork gaskets, this one-piece molded rubber unit eliminates the common leak points found at corner joints and transitions. The heavy-duty rubber construction is engineered to resist oil saturation and thermal degradation, ensuring a reliable seal even under the increased crankcase pressures often seen in modified or boosted B-Series builds.

• One-piece design ensures a continuous seal across the entire pan rail without the need for RTV at joints.
• Constructed from high-grade heavy-duty rubber for improved durability and compression recovery.
• Direct fit for Acura/Honda B-Series oil pans (B16A, B17A, B18A/B/C, B20B/Z).
• Manufacturer Part Number: 93200

Ensure a reliable, leak-free seal on your diesel engine with the Moroso 27293 Oil Pan Gasket. This precision-engineered gasket is designed specifically for the Ford 7.3L Powerstroke and International T444E, providing a high-quality alternative to standard RTV or failing factory seals.

Built to withstand the significant heat and vibration of heavy-duty diesel applications, this gasket is an essential component for oil pan replacements or engine refreshes. It is designed to align with factory mounting points for a straightforward installation that prevents future oil leaks.

• Manufacturer Part Number: 27293
• Engine Compatibility: Ford 7.3L Powerstroke and International T444E
• Application: Lower Engine Oil Pan Sealing
• Construction: Engineered for high-heat diesel environments

Ensure a reliable, leak-free seal between your blow off valve and mounting flange with this genuine GReddy replacement gasket. Over time, extreme engine bay heat and pressure can compress or degrade the original seal, leading to boost leaks and inconsistent valve operation.

This precision-cut gasket is specifically engineered to fit GReddy Type RZ and Type R series valves, restoring factory-level sealing performance to your forced induction system. It is a critical component for maintaining peak boost response and preventing performance-robbing air leaks.

• Fits GReddy Type RZ and Type R Blow Off Valves
• Genuine GReddy replacement component
• Ensures a boost-tight seal at the BOV flange
• Manufacturer Part Number: 11900456

Ensure a leak-free seal in your performance exhaust setup with the GReddy 3.0in Exhaust System Gasket. Engineered to withstand the high temperatures and vibration typical of performance applications, this gasket provides a reliable seal between 3-inch (approx. 76mm) exhaust flanges to prevent gas leaks that can lead to power loss and inaccurate O2 sensor readings.

• Diameter: 3.0 inches (76mm)
• Bolt Hole Style: Round
• Application: Exhaust system flanges
• Manufacturer Part Number: 11000327

A properly sealed exhaust is critical for maintaining optimal backpressure and achieving a crisp exhaust note. This GReddy gasket is a direct replacement for worn or damaged gaskets in most universal and vehicle-specific 3-inch 2-bolt exhaust connections.

Ensure a leak-free seal between your exhaust components with the GReddy 60mm Oval Exhaust Gasket. Engineered to withstand the extreme temperatures and pressures of high-performance exhaust systems, this gasket is a direct replacement for worn or blown-out gaskets on 60mm (approx. 2.36 inch) piping.

• Bore Diameter: 60mm
• Flange Type: Oval 2-Bolt
• Construction: High-temperature composite designed for exhaust flange sealing
• Manufacturer Part Number: 11000323

Maintaining a secure seal at the flange is critical for consistent exhaust backpressure and preventing cabin fumes or false O2 sensor readings. This genuine GReddy component provides the durability and fitment precision required for both street and track-driven vehicles.

Maintain a proper, leak-free seal in your high-performance exhaust system with the GReddy 80mm Oval Exhaust Gasket. Designed to withstand the extreme temperatures and vibrational stresses of tuned engines, this gasket replaces worn or compressed seals at the flange connections to prevent power-robbing exhaust leaks and unwanted noise.

This 80mm (approximately 3.15 inch) gasket is engineered specifically for oval-style 2-bolt flanges commonly found on GReddy cat-back systems, mid-pipes, and downpipes. Using a high-quality composite material, it provides the necessary compression to fill minor surface irregularities between mating flanges for a reliable, airtight fit.

• Manufacturer Part Number: 11000305
• Size: 80mm (3.15") Bore
• Flange Type: 2-Bolt Oval
• Construction: High-temperature resistant composite material
• Application: Universal fit for 80mm oval exhaust flanges

Ensure a reliable, leak-free seal in your exhaust system with the GReddy 60mm Oval Exhaust Gasket. This high-temperature gasket is designed specifically for 2-bolt oval flanges, providing a precise fit to prevent exhaust leaks and maintain optimal flow. Whether you are installing a new GReddy cat-back or replacing a worn factory-style seal, this genuine component ensures professional-grade performance and durability.

• Manufacturer Part Number: 11000301
• Inlet Diameter: 60mm
• Flange Type: 2-Bolt Oval
• High-temperature resistant construction for long-term sealing
• Engineered for use with GReddy and universal 60mm exhaust components

Fits 2003-2015 Mitsubishi Lancer Evolution VIII, IX, and X.

This Forced Performance divided turbine inlet gasket provides a reliable, high-temperature seal between the exhaust manifold and the turbine housing. Specifically designed for divided (twin-scroll) turbocharger configurations, this gasket ensures exhaust gases are properly channeled into the turbine without leakage. A precise seal at this critical junction is essential for maintaining optimal boost pressure and minimizing turbocharger spool lag.

• Prevents exhaust leaks at the turbine inlet flange
• Engineered for divided/twin-scroll turbocharger housings
• High-temperature material construction for durability under extreme manifold heat
• Manufacturer Part Number: 3003040

Fits select 2011-2021 Subaru (Forester, Impreza, WRX, BRZ, Legacy, Outback, Crosstrek, XV Crosstrek), Toyota 86, and Scion FR-S.

The Fel-Pro OS30877 engine oil pan gasket set is engineered specifically for the real-world repair environment, where sealing surfaces are often less than perfect. This 11-bolt gasket set utilizes proprietary materials and innovative design features to compensate for surface irregularities, ensuring a reliable, leak-free seal on high-mileage blocks and oil pans.

• Precision Fit: Application-specific design ensures an exact fit for 11-bolt oil pan configurations.
• Repair-Focused Engineering: Specifically manufactured to help seal warped, pitted, or imperfect sealing surfaces.
• Complete Solution: Includes the essential components required for a professional oil pan gasket replacement.
• Expertly Validated: Rigorously tested and approved by Fel-Pro engineers to meet durability and performance standards.
• Manufacturer Part Number: OS30877