The Innovate Motorsports LC-2 (MPN 3881) is a 100% digital wideband air/fuel ratio controller built on patented DirectDigital signal processing technology. It provides precise, real-time data on engine richness or leanness under any load condition, making it an essential tool for tuning standalone ECUs, data acquisition systems, and dynamometers.

This unit features self-calibrating circuitry that automatically compensates for changes in ambient temperature, altitude, and sensor condition. With two fully programmable analog outputs and a digital input/output, the LC-2 integrates seamlessly into existing performance setups and can be daisy-chained for individual cylinder monitoring through the Innovate Modular Tuning System (MTS).

• Patented DirectDigital signal processing for high-speed accuracy
• Includes 8ft cable for flexible mounting and routing
• Two 0-5V fully programmable analog outputs
• Self-calibrating circuitry compensates for temperature and altitude
• Fully compatible with LogWorks analysis software and MTS
• Manufacturer Part Number: 3881

The Innovate Motorsports LC-2 (MPN 3877) is an advanced digital wideband air/fuel ratio controller built on the legacy of the LC-1. Utilizing patented DirectDigital signal processing, this controller provides precise real-time data on engine richness or leanness across all load ranges. The LC-2 features self-calibrating circuitry that automatically compensates for fluctuations in temperature, altitude, and sensor wear, ensuring consistent accuracy for tuning and data acquisition.

Designed for versatile integration, the LC-2 is ideal for use with dynamometers, standalone ECUs, and digital gauges. Its modular design allows for daisy-chaining multiple units for individual cylinder monitoring through the Innovate Modular Tuning System (MTS).

• Patented 100% digital wideband air/fuel ratio technology
• Two fully programmable analog outputs for gauges and ECUs
• Digital input/output for integration with LogWorks software and MTS devices
• Self-calibrating circuitry for environmental and sensor compensation
• Real-time data logging capabilities via PC-based LogWorks software
• Manufacturer Part Number: 3877

The Innovate Motorsports 38500 K-Type thermocouple probe provides precise exhaust gas temperature (EGT) monitoring for high-performance tuning applications. This sensor is designed to integrate seamlessly with Innovate data logging and interface systems that feature dedicated thermocouple channels.

Engineered for durability in high-heat environments, the kit includes a high-grade stainless steel weld-in fitting and bung for a secure installation in the exhaust manifold or downpipe. The 6-foot lead wire ensures flexible routing from the engine bay to your data hub or gauge interface.

• Compatible with Innovate TC-4 PLUS, LMA-3, DL-32, and TC-4 units
• Includes stainless steel weld-in fitting and bung
• 6-foot lead wire with standard Type-K connector
• Designed for precision EGT data acquisition and engine safety
• Manufacturer Part Number: 38500

The Innovate Motorsports 4ft 4-Pin to 4-Pin Serial Patch Cable (MPN 3846) provides a reliable connection for your data logging and air/fuel ratio monitoring setup. This cable is specifically designed to interface or daisy-chain compatible Innovate devices, ensuring clean signal transmission between your wideband controllers and digital gauges.

• Direct replacement or expansion cable for Innovate Motorsports systems
• Compatible with LM-2, LC-2, and MTX series gauges and controllers
• Standard 4-pin to 4-pin serial connectors for secure data transfer
• 4-foot length allows for flexible routing behind the dash or through the firewall
• Manufacturer Part Number: 3846

Ensure consistent and accurate air/fuel ratio readings with this 3-foot replacement sensor cable from Innovate Motorsports. This cable (MPN 3843) is designed to provide a secure, high-integrity connection between your wideband oxygen sensor and your Innovate tuning hardware. It is specifically compatible with the LM-2 handheld controller and MTX-L series digital air/fuel ratio gauges.

Built to handle the heat and vibration of performance automotive environments, this cable features ruggedized connectors to prevent signal dropouts during critical tuning or data logging sessions. Users can verify their specific sensor type and configuration by connecting their device to the Innovate LM Programmer software utility.

• Length: 3 Feet
• Compatibility: Innovate Motorsports LM-2 and MTX-L Series
• Manufacturer Part Number: 3843
• Application: Connects wideband O2 sensor to gauge or controller

The Innovate Motorsports 3840 Serial Program Cable provides the essential link between your vehicle's electronics and your PC. This high-quality serial interface allows you to configure gauge settings, calibrate sensors, and perform firmware updates on your Innovate digital air/fuel controllers and secondary gauges.

By connecting to your computer's serial port (or a serial-to-USB adapter), you can access the full suite of configuration options within the LogWorks software. This is required for setting up custom warning triggers, analog output scaling, and ensuring your hardware is running the latest manufacturer software for peak accuracy.

• Enables PC connectivity for configuration and firmware updates
• Compatible with MTX Series Gauges
• Compatible with LM-2, LC-2, and SCG-1 controllers
• Compatible with PSB-1 and PSN-1 PowerSafe gauges
• Essential for utilizing LogWorks software features
• Manufacturer Part Number: 3840

The Innovate Motorsports Inductive RPM Clamp (MPN 3834) is a precision diagnostic accessory designed to capture engine speed data during tuning and logging sessions. By clamping directly onto a spark plug wire, this sensor provides a reliable RPM signal without requiring invasive wiring or tapping into the vehicle's electrical harness.

This inductive pickup is engineered for seamless integration with the Innovate LM-2 Air/Fuel Ratio Meter, as well as the LMA-2, LMA-3, and DL-32 multi-sensor interfaces. The included 6-foot cable provides the necessary reach to route from the engine compartment to your data logger or laptop interface inside the vehicle cabin.

• Product Type: Inductive RPM Pickup Clamp
• Manufacturer Part Number: 3834
• Cable Length: 6 Feet (1.8m)
• Compatibility: Innovate LM-2, LMA-2, LMA-3, and DL-32 digital data loggers
• Installation: Clamps to spark plug wire for non-invasive signal pickup

The Innovate Motorsports LM-2 Suction Cup Window Mount provides a secure, hands-free solution for monitoring critical data during street tuning or dyno sessions. This heavy-duty mount attaches directly to the interior of your windshield, positioning the LM-2 display within your line of sight to allow for safer, more efficient air/fuel ratio monitoring while driving.

• Designed specifically for the Innovate Motorsports LM-2 digital air/fuel ratio meter
• Industrial-strength suction cup ensures a stable hold on glass surfaces
• Adjustable cradle allows for optimal viewing angles while tuning
• Replaces the need for temporary or unsecured device placement during data logging
• Manufacturer Part Number: 3814

The Innovate Motorsports Serial Patch Cable (MPN 3812) bridges the connection between different generations of digital tuning hardware. This adapter allows you to mate the newer-style Molex 4-pin serial connector to the legacy 2.5mm ports used on previous-generation Innovate modules, ensuring your entire data acquisition chain remains functional.

Specifically designed for daisy-chaining multiple devices, this cable allows you to link several modules together for comprehensive data logging or real-time viewing within the LogWorks software environment. It provides a secure, low-latency connection for critical engine data transmission.

• Interface: Molex 4-Pin to 2.5mm Serial
• Application: Connects newer serial devices to legacy Innovate modules
• Compatibility: Replaces or connects LC-1, LMA-3, DL-32, SSI-4, and TC-4 units to LM-2 systems
• Software: Fully compatible with Innovate Motorsports LogWorks software
• Part Number: 3812

The Innovate Motorsports 8-foot sensor cable (MPN 3810) is a direct-fit replacement component designed to bridge the connection between your wideband oxygen sensor and the air/fuel ratio controller. Engineered specifically for the Innovate LM-2 handheld tuner and MTX-L digital series gauges, this cable ensures precise data transmission for critical engine tuning and monitoring.

• Compatible with Innovate LM-2 and MTX-L wideband systems
• Length: 8 feet (2.44 meters) for flexible routing through firewalls and chassis
• Durable shielding to protect signal integrity from engine bay heat and EMI
• Terminated with high-quality connectors for a secure, moisture-resistant fit
• Manufacturer Part Number: 3810

This cable allows for seamless integration with your existing wideband setup. For users unsure of their hardware configuration, sensor type and compatibility can be confirmed by connecting your Innovate device to the LM Programmer software utility.

The Innovate Motorsports OBD-II / CAN Interface Accessory Cable (3809) expands the data-logging capabilities of your LM-2 Digital Air/Fuel Ratio Meter. By connecting your LM-2 directly to the vehicle's diagnostic port, this cable allows you to capture and sync critical ECU data—such as RPM, throttle position (TPS), manifold pressure (MAP), and ignition timing—alongside your wideband oxygen sensor readings.

This hardware interface is essential for tuners and technicians who need to analyze fueling performance relative to specific engine loads and operating conditions. The high-quality cable ensures a reliable connection to standard OBD-II and CAN protocols for consistent data streaming during street or dyno tuning sessions.

• Direct connection between Innovate LM-2 and vehicle OBD-II port
• Enables logging of up to 16 OBD-II/CAN parameters simultaneously
• Synchronizes ECU sensor data with wideband air/fuel ratio readings
• Compatible with all Innovate Motorsports LM-2 Wideband kits
• Manufacturer Part Number: 3809

Reliable data logging requires storage media that is fully compatible with your hardware's specific file system and write speed requirements. This 1GB SD card is specifically tested and approved by Innovate Motorsports for use with their range of digital gauges and data acquisition systems.

Many high-capacity SDHC or SDXC cards can cause initialization errors or data corruption in specialized automotive electronics. Using this verified 1GB card ensures your air/fuel ratio data and sensor logs are recorded accurately and remain accessible for tuning and analysis.

• Capacity: 1GB
• Format: Standard SD
• Manufacturer Part Number: 3787
• Verified for compatibility with Innovate Motorsports hardware

The Innovate Motorsports Serial Program Cable (MPN 3746) provides a direct communication link between your PC and your Innovate data logging or air/fuel ratio devices. This cable is essential for configuring device settings, performing firmware updates, and viewing real-time data on your computer.

Designed for professional tuners and DIY enthusiasts alike, this serial interface ensures stable data transfer for precise calibration of your vehicle's electronics. It features a high-quality 2.5mm plug on one end and a DB9 serial connector on the other.

Compatible Innovate Motorsports Devices:

• LC-1 Digital Wideband Controller
• XD-16 Dash Mount Digital Display
• LMA-3 Multi-Sensor Aux Box
• DL-32 Multi-Channel Data Logger
• SSI-4 Sensor Stack Interface
• TC-4 4-Channel Thermocouple Interface

Note: If your computer does not have a native DB9 serial port, a high-quality USB-to-Serial adapter (sold separately) is required to complete the connection.

The Innovate Motorsports 3733 USB-to-Serial Adapter provides a reliable data connection between modern computers and Innovate tuning hardware. This cable is specifically engineered to bridge the gap for laptops lacking a native DB9 serial port, allowing for seamless communication with wideband controllers and data loggers.

Designed for stability during high-speed data logging, this adapter ensures your PC can interface correctly with Innovate’s proprietary software suites. It is a critical component for users performing real-time tuning, data analysis, or firmware updates on supported devices.

• Software Integration: Recommended for use with LM Programmer and LogWorks software suites.
• Connectivity: Converts standard Serial DB9 to USB interface.
• Hardware Drivers: Included for standard setup and configuration.
• Operating System Compatibility: Supports Windows 98 SE, ME, 2000, XP, Vista (32/64-bit), Windows 7, and Windows 8 (with latest driver download).
• Manufacturer Part Number: 3733

The Innovate Motorsports 4 BAR MAP (Manifold Absolute Pressure) Sensor is a high-precision component designed specifically for integration with MTX-D and SCG-1 series digital gauges. This sensor is an essential upgrade or replacement for high-performance forced induction builds, providing the resolution and range necessary to monitor manifold pressure accurately under high-load conditions.

With its 4-bar rating, this sensor handles a total pressure range sufficient for monitoring up to approximately 43.5 psi of boost (beyond atmospheric pressure). It is built to withstand the heat and vibration of the engine bay, ensuring a stable signal for your gauge or boost controller to maintain engine safety and tuning accuracy.

• Compatible with Innovate MTX-D Vacuum/Boost gauges and SCG-1 Solenoid Boost Controllers
• 4 Bar pressure range (supports up to 43.5 psi of boost)
• Provides critical manifold pressure data for accurate boost management
• Rugged construction with a secure 3-pin connector interface
• Manufacturer Part Number: 15-0048

Restore the integrity of your flex fuel monitoring system with this genuine Innovate Motorsports replacement ethanol sensor cable (08-0257). This cable provides the critical data link between your ethanol content sensor and your digital gauge, ensuring accurate, real-time transmission of fuel composition and temperature data to your cockpit.

Specifically engineered for the high-demand environments of performance tuning, this harness replaces frayed, melted, or damaged wiring that can lead to erratic readings or signal loss. It features the correct multi-pin connector for a secure, click-lock fitment into the gauge harness, maintaining the precise voltage signals required for E85 tuning.

• Direct replacement for Innovate Motorsports part number 08-0257
• Compatible with Innovate MTX-D (Ethanol Content & Fuel Temp), ECB-1 (Boost & Ethanol), and ECF-1 (Fuel Pressure & Ethanol) gauges
• Shielded construction to minimize electromagnetic interference
• Ensures accurate transmission of ethanol percentage and fuel temperature

The Haltech WB1 Single Channel CAN Wideband Controller Kit (HT-159978) provides high-accuracy air/fuel ratio (AFR) monitoring for your EFI system. By utilizing digital CAN bus communication, this kit delivers precise data directly to your ECU without the signal noise or ground offset errors associated with traditional 0-5V analog wideband units.

This kit features a laboratory-grade NTK sensor, known in the tuning industry for superior durability and accuracy in high-heat or rich-fueling environments. It is a plug-and-play solution for Haltech Elite and Nexus series ECUs, allowing for rapid data logging and closed-loop fuel control integration.

• Single channel wideband controller with CAN bus connectivity
• High-accuracy NTK wideband oxygen sensor
• Includes 1200mm (4ft) CAN cable for versatile routing
• M18 x 1.5 weld-on exhaust bung included
• Compatible with Haltech Elite and Nexus ECU platforms
• Manufacturer Part Number: HT-159978

Kit Includes: WB1 Controller, NTK Sensor, weld-on bung, 1200mm CAN cable, power supply cable, and Quick Start Guide.

The Haltech WB1 (HT-159976) is a high-accuracy, single-channel wideband controller designed to integrate seamlessly with your engine management system via the CAN bus. This kit provides real-time air/fuel ratio (AFR) data, allowing for precise tuning and reliable closed-loop fuel correction. By utilizing CAN connectivity, the WB1 avoids the signal degradation often found in traditional analog wideband setups and simplifies wiring by daisy-chaining with other Haltech CAN devices.

This comprehensive kit includes the industry-standard Bosch 4.9 LSU sensor, known for its longevity and fast response times. The provided 1200mm CAN cable ensures flexible mounting options within the engine bay or chassis.

• Manufacturer Part Number: HT-159976
• Sensor Type: Bosch 4.9 LSU Wideband Sensor
• Connectivity: CAN bus interface
• Cable Length: 1200mm CAN cable
• Included Components: Weld-on O2 sensor bung, power supply cable, and Quick Start Guide (QSG)

The Haltech UC-10 Moulded Panel Mount provides a professional, integrated solution for installing your UC-10 digital dash. Measuring 250mm x 500mm (approx. 10in x 20in), this oversized blank panel offers ample surface area for custom trimming and fitment into various dashboard configurations or instrument clusters.

Constructed from high-grade black ABS plastic, this panel is UV-stabilised to resist warping, fading, or cracking under direct sunlight, ensuring a durable, factory-like finish for your custom interior project. The moulded design provides the necessary structural rigidity to securely hold the digital display unit in place.

• Manufacturer Part Number: HT-060091
• Dimensions: 250mm x 500mm (10in x 20in)
• Material: UV Stabilised ABS Plastic
• Finish: Black
• Designed specifically for Haltech UC-10 digital dash displays

The Haltech iC-7 Moulded Panel Mount provides a professional, clean solution for installing an iC-7 digital dash display into custom or factory dashboards. This oversized 250mm x 500mm (10in x 20in) panel gives fabricators ample surface area to trim and shape the mount for a perfect fit in various vehicle interiors.

• Constructed from high-quality, UV-stabilized ABS plastic to prevent warping or fading under sun exposure
• Textured black finish matches common automotive interior plastics
• Large 250mm x 500mm dimensions allow for custom dashboard integration
• Specifically moulded to accept the Haltech iC-7 digital dash unit
• Manufacturer Part Number: HT-060090

Securely install your Haltech iC-7 digital dash to a roll cage, steering column, or chassis rail with this precision-engineered bar mount bracket. Constructed from high-grade aluminum, this bracket is designed specifically for 1.25-inch (31.75mm) diameter tubing, providing a rigid and vibration-resistant mounting solution to keep your display perfectly positioned in the cockpit.

• CNC-machined aluminum construction for maximum durability and weight savings
• Direct fitment for 1.25-inch OD tubing
• Maintains a low profile to maximize driver visibility
• Easy bolt-on installation for track or off-road vehicles

Specifications:

• Brand: Haltech
• MPN: HT-060072
• Compatibility: Haltech iC-7 Display Dash
• Tube Size: 1.25in (31.75mm)
• Material: Aluminum

The Haltech iC-7 Display Dash Hooded Mounting Bracket (HT-060071) provides a secure, professional mounting solution for your digital dash while significantly improving screen visibility. Designed specifically for the iC-7, this bracket features an integrated hood that shields the display from overhead sunlight and cabin glare, ensuring you can read critical engine data in any lighting condition.

This hooded mount is ideal for custom interior builds and race applications where traditional gauge clusters are removed. It offers a rigid foundation that resists vibration and allows for precise positioning within the driver's line of sight.

• Specifically engineered for the Haltech iC-7 Display Dash
• Integrated sunshade/hood reduces glare and screen wash-out
• Simplifies custom dash fabrication and installation
• Durable construction suited for high-performance environments
• Manufacturer Part Number: HT-060071

Securely mount your Haltech iC-7 digital dash with the HT-060070 Standard Mounting Bracket. This bracket provides a rigid, vibration-resistant interface for your display, ensuring the screen remains stable and easy to read during high-performance driving. Engineered specifically for the iC-7, it allows for a clean, professional installation in custom dash panels or modified interiors.

• Specifically designed for the Haltech iC-7 Display Dash
• Rigid construction helps eliminate screen vibration and movement
• Simplifies the mounting process for custom dashboard configurations
• Manufacturer Part Number: HT-060070

The Haltech NEXUS R3 Tube Mount Kit provides a professional, secure solution for installing your NEXUS R3 VCU directly onto a 1.625-inch (1-5/8") diameter roll cage or chassis tube. This kit is engineered to handle the vibrations and G-forces of motorsports, ensuring your VCU remains stable and accessible in high-performance environments.

• Specifically designed for the Haltech NEXUS R3 footprint
• Compatible with 1.625in (1-5/8") OD tubing
• Provides a clean, integrated look for tube-frame and off-road builds
• Facilitates better harness routing and unit cooling by elevating the VCU
• Includes necessary hardware for unit attachment
• Manufacturer Part Number: HT-039067

Secure your Haltech engine management system with the HT-039000 Platinum ECU Rail-Type Mounts. This hardware kit is specifically designed for all Haltech products housed in silver extrusion casings, providing a professional and stable mounting solution that slides directly into the integrated chassis rails.

These mounts allow for adjustable positioning along the length of the ECU, making it easier to secure the unit to brackets or flat surfaces within the vehicle. The kit includes high-quality fasteners to ensure a vibration-resistant installation that meets the demands of high-performance environments.

• Manufacturer Part Number: HT-039000
• Compatibility: All Haltech products housed in silver extrusion housings
• Mounting Style: Rail-type sliding brackets
• Included Hardware: 4 mounts and 4 matching screws

The GReddy 34mm Radiator Hose Temp Sender Adapter (MPN 16401634) provides a reliable mounting point for aftermarket water temperature sensors. This adapter allows you to monitor engine coolant temperatures accurately by tapping directly into the cooling system flow, ensuring your gauge receives precise data before the coolant enters the radiator.

Designed for professional cooling system integration, this component simplifies sensor installation by splicing into the upper radiator hose, eliminating the need for drilling or tapping into the engine block or radiator tanks. It is engineered for a secure, leak-free fit within standard 34mm internal diameter coolant hoses.

• Manufacturer Part Number: 16401634
• Outside Diameter: 34mm
• Compatibility: Fits 34mm internal diameter radiator hoses
• Application: Radiator hose temperature sensor integration
• Construction: Precision machined for durability and consistent fitment

Fits 2019-2020 Volkswagen Golf S, SE, and TSi models (1.2L / 1.4L).

Modern engines have largely eliminated traditional vacuum ports from the intake manifold, presenting a challenge when installing accessories that require a manifold pressure signal. The GFB Gauge Port/Boost Tap (MPN 5801) provides a precise and reliable solution for sourcing boost or vacuum without requiring permanent modifications to factory components.

Designed to install between the factory sensor and the intake manifold, this tap allows for the seamless integration of boost gauges, electronic boost controllers, and aftermarket blow-off valves. It ensures a clean signal for accurate readings and optimal performance of secondary devices.

• Provides a dedicated boost/vacuum source from the intake manifold
• Required for installing boost gauges, controllers, and specific BOVs
• Non-destructive installation between factory sensor and manifold
• Durable construction for reliable pressure sealing
• Manufacturer Part Number: 5801

Fits 2006-2014 Volkswagen GTI models, including Base, Driver's Edition, Fahrenheit, and Wolfsburg Edition.

Many modern turbocharged engines utilize intake manifold designs that eliminate traditional vacuum ports, creating a challenge when installing aftermarket accessories. The GFB Gauge Port (MPN 5800) provides a precise and reliable source for vacuum and boost signals without requiring permanent modification to the factory intake manifold.

This adapter is essential for the proper installation of boost gauges, electronic boost controllers, and vacuum-actuated blow-off valves. It integrates seamlessly into the factory system to provide a clean signal take-off point, ensuring your aftermarket electronics or mechanical valves receive accurate pressure data for optimal performance.

• Provides a secure vacuum/boost signal source
• Eliminates the need to drill or tap the factory intake manifold
• Compatible with boost gauges, controllers, and BOVs
• Precision-machined for a leak-free fit
• Manufacturer Part Number: 5800

Monitor your turbocharger’s shaft speed with precision using the Garrett G-Series Speed Sensor Kit (Pro). This professional-grade sensor is a critical tool for tuners and racers looking to maximize engine performance while staying within the safe operating limits of the compressor map. By providing real-time RPM data, it allows you to identify potential overspeed conditions that could lead to catastrophic turbo failure.

• Compatibility: Designed for all Garrett G-Series turbochargers (G25 through G57 models).
• Direct Integration: This "Pro" version is intended for users who feed data directly into an aftermarket ECU or datalogging system; no standalone gauge is included.
• Precision Hardware: High-accuracy sensor detects compressor wheel rotation for stable, noise-free signal output.
• Included Components: Speed sensor, wiring harness, and installation hardware.
• Part Number: 781328-0004

Monitor your turbocharger’s compressor wheel RPM in real-time with the Garrett G-Series Street Speed Sensor Kit. Precision-engineered for G-Series turbochargers, this kit allows tuners to accurately track turbo speed to ensure the unit stays within its efficient operating map and to prevent catastrophic overspeed conditions.

This street-grade kit is designed for easy integration with most aftermarket ECUs and data logging systems. The sensor installs directly into the pre-machined speed sensor port on G-Series compressor housings, positioning the sensor tip at the correct depth to read compressor blade passes without interference. The 781328-0003 kit provides a reliable signal for precise boost control and system diagnostics.

• Compatible with Garrett G-Series turbocharger models
• Provides real-time compressor wheel speed data (RPM)
• Essential for precise tuning and turbocharger longevity
• Includes speed sensor, wiring harness, and mounting hardware
• Manufacturer Part Number: 781328-0003