The Innovate Motorsports LM-2 Dual O2 Ultimate Shop Kit (3921) is a professional-grade wideband air/fuel ratio tuning solution designed for shops and serious tuners. This handheld unit combines the power of dual-channel O2 monitoring with a high-speed 32-channel data logger, making it ideal for tuning dual-bank engines or comparing cylinder-to-cylinder performance.

Designed for versatility in a shop environment, this kit includes extended 18-foot sensor cables and heavy-duty exhaust clamps, allowing for quick, non-permanent installations during dyno pulls or road testing. The LM-2 also functions as an OBD-II scan tool on supported vehicles and features four fully-differential analog inputs to integrate external sensors like MAP, TPS, or EGT into your data logs.

• Dual Channel Capability: Simultaneously monitor and log two O2 sensors for V-configuration or twin-turbo engines.
• Extended Reach: Includes (2) 18-foot sensor cables and inductive RPM clamps for flexible setup on any vehicle.
• Technical Inputs: 4 fully-differential analog inputs for comprehensive data collection.
• Onboard Logging: Built-in SD card slot allows for standalone data recording without the need for a connected laptop.
• Complete Installation Kit: Includes exhaust clamps, inductive clamp, and (4) weld-in bungs/plugs for permanent installations.

The Innovate Motorsports LM-2 (3920) Single O2 Ultimate Shop Kit combines a professional-grade wideband air/fuel ratio meter with a full-function 32-channel data logger. This comprehensive kit is designed for technicians and tuners who require a portable, high-accuracy solution for dyno or street tuning sessions without the need for permanent sensor installation.

Equipped with patented DirectDigital™ wideband technology, the LM-2 provides fast and accurate AFR data. The shop kit configuration includes an 18-foot sensor cable and a heavy-duty exhaust clamp, allowing for easy temporary mounting and reaching tailpipes on a variety of vehicle configurations. The unit also features four fully-differential analog inputs, enabling you to integrate and log data from external sensors simultaneously.

• Part Number: 3920
• 4 fully-differential analog inputs for external sensor integration
• High-speed internal data logging to SD card (sold separately)
• 18 ft. sensor cable for extended reach during shop use
• Includes professional-grade exhaust clamp for tailpipe measurement
• Inductive RPM clamp for easy engine speed signal pickup

What's in the Box: LM-2 Wideband Meter, 18 ft. Sensor Cable, Inductive Clamp, Exhaust Clamp, (2) Bung/Plug sets, and Installation Instructions.

The Innovate Motorsports MTX-L PLUS (MPN 3918) represents the next generation of wideband air/fuel ratio monitoring. Utilizing patented DirectDigital™ technology and an all-new advanced sensor control system, this gauge provides significantly faster feedback and optimized heater control for improved sensor longevity and accuracy.

This comprehensive kit is built for professional tuning and high-performance applications, allowing users to calibrate the O2 sensor to compensate for sensor wear and atmospheric changes. The integrated MTS serial communication enables seamless connectivity with other MTS-enabled devices and the powerful LogWorks PC software for advanced data logging and analysis.

• Patented DirectDigital™ technology for industry-leading response times
• Advanced sensor control optimizes heater performance for maximum durability
• User-calibratable O2 sensor ensures long-term accuracy
• MTS serial connectivity for data logging with LogWorks software
• Includes digital gauge, 8ft sensor cable, and wideband O2 sensor
• Manufacturer Part Number: 3918

The Innovate Motorsports MTX-D Fuel Pressure Gauge (MPN 3917) provides high-accuracy digital monitoring for fuel systems ranging from 0 to 145 PSI. This 2-1/16-inch (52mm) gauge kit uses an electronic pressure sensor to eliminate the need for running mechanical fuel lines into the vehicle cabin, ensuring a safer and cleaner installation. Built with the Modular Tuning System (MTS), this gauge can be daisy-chained to other Innovate devices or a PC for real-time data logging via the LogWorks software.

• Customizable Aesthetics: Includes interchangeable black and white faceplates and black and silver bezels to match any interior or gauge cluster.
• Technical Integration: Features locking connectors for a secure, vibration-resistant wiring harness and MTS serial connections for advanced diagnostics.
• Wide Range: High-resolution digital display monitors pressures from 0-145 PSI (0-10 bar).

Kit Includes: Gauge, black faceplate, white faceplate, black bezel, silver bezel, serial program cable, electronic pressure sensor, pressure sensor cable, and quick start guide.

Monitor two of your engine's most critical parameters simultaneously with the Innovate Motorsports MTX-D Dual Function gauge kit. This 2 1/16-inch (52mm) digital gauge features a high-visibility LED display designed for precision monitoring of oil pressure and temperature, providing real-time data to protect your powertrain from lubrication failure or overheating.

• Dual Function Monitoring: Tracks oil pressure from 0-150 psi and oil temperature via an included high-accuracy thermistor.
• MTS Connectivity: Features Modular Tuning System (MTS) serial connections for seamless data logging with other Innovate devices or PC software.
• Rugged Construction: Equipped with secure locking connectors to ensure signal integrity in high-vibration environments.
• Customizable Aesthetics: Includes interchangeable black and white faceplates, plus black and silver bezels, to match your vehicle's interior.

The kit (MPN 3913) includes the gauge, an electronic pressure sensor, a temperature thermistor, sensor cables, a serial programming cable, and the necessary hardware for a complete installation.

The Innovate Motorsports MTX-D (MPN 3912) is a dual-function digital gauge designed to provide real-time monitoring of ethanol content percentage and fuel temperature. Built into a standard 52mm (2 1/16 inch) housing, this gauge is a critical tool for tuning flex-fuel vehicles and ensuring consistent fuel quality.

• Customizable Aesthetics: Includes interchangeable black and white faceplates and black and silver bezels to match any interior or existing gauge cluster.
• Integrated Connectivity: Features Innovate’s MTS serial connections, allowing for easy data logging when used with other MTS-enabled devices.
• Robust Installation: Equipped with locking connectors to ensure secure wiring and simplified routing during setup.
• Specifications: 52mm diameter, digital display, includes serial program cable for firmware updates and configuration.

Note: This kit (3912) includes the gauge, faceplates, bezels, harness, and program cable; however, the ethanol content sensor is not included and must be purchased separately.

The Innovate Motorsports ECB-1 Ethanol Advanced Gauge (MPN 3911) is a comprehensive monitoring solution designed for high-performance tuning. This 52mm gauge combines ethanol content, fuel temperature, and boost/vacuum data into a single, high-contrast OLED display. By integrating patented DirectDigital™ O2 sensor control technology, the ECB-1 provides the precise, real-time metrics required to safely and effectively tune vehicles running high-ethanol fuel blends.

• Four-in-One Monitoring: Tracks Ethanol %, Fuel Temperature, Boost, and Vacuum.
• DirectDigital™ Technology: Utilizes Innovate’s proprietary O2 sensor control for faster response and improved accuracy.
• OLED Display: High-visibility screen with programmable warning LEDs for fuel temperature and boost levels.
• Data Logging: Includes MTS Serial Comms for integration with LogWorks PC software or other MTS-enabled devices to capture and analyze critical engine data.
• Pressure Range: Features an on-board MAP sensor capable of reading up to 43.5 PSI (3 BAR).
• MPN 3911 Note: This specific kit includes the Ethanol Content Sensor and Boost Sensor, but does NOT include the Bosch LSU 4.9 Wideband O2 Sensor.

The Innovate Motorsports ECB-1 (MPN 3906) provides critical 4-in-1 engine data for enthusiasts running ethanol-blended fuels. This comprehensive kit monitors ethanol content percentage, fuel temperature, boost pressure, and wideband air/fuel ratio (AFR) through a single high-contrast OLED display, eliminating the need for multiple independent gauges.

At the core of the ECB-1 is patented DirectDigital™ O2 sensor control, which manages the included Bosch LSU 4.9 sensor with industry-leading speed and accuracy. This system allows tuners to capture precise metrics for reliable performance on E85. The gauge also features MTS serial connectivity, enabling seamless integration with other Innovate Motorsports devices and data logging via LogWorks PC software.

• Four-in-one display: Ethanol %, Fuel Temp, Boost (4-bar), and Wideband AFR
• High-contrast, user-configurable OLED display
• Patented DirectDigital™ wideband technology
• Includes Bosch LSU 4.9 wideband O2 sensor and ethanol content sensor
• Internal 4-bar MAP sensor (up to 43.5 PSI)
• MTS Serial Comms for expansion and data logging
• Manufacturer Part Number: 3906

The Innovate Motorsports MTX-D (MPN 3904) is a professional-grade dual-function digital gauge engineered for precise monitoring of ethanol content percentage and fuel temperature. Accessing real-time ethanol concentration data is critical for accurate flex-fuel tuning and engine safety, while monitoring fuel temperature helps technicians identify potential vapor lock issues and ensure consistent fueling performance.

Housed in a standard 52mm (2 1/16") water-resistant casing, the MTX-D features interchangeable faceplates and bezels for a customized dashboard appearance. The kit utilizes locking connectors to ensure secure electrical contact in high-vibration environments and includes MTS serial connections for seamless integration with other Innovate devices for data logging.

• Dual-function monitoring: Ethanol content % and Fuel Temperature
• Standard 52mm (2 1/16") gauge diameter with water-resistant housing
• Includes Ethanol Content Sensor and dedicated wiring harness
• Interchangeable Black and White faceplates
• Interchangeable Black and Silver bezels
• MTS serial connectivity for logging via PC or other Innovate hardware
• Complete kit includes: Gauge, sensor, harness, serial program cable, and hardware
• Manufacturer Part Number: 3904

The Innovate Motorsports ECF-1 (Fuel) Ethanol Advanced Gauge Kit provides a comprehensive monitoring solution for high-performance E85 tuning. This multi-function kit combines patented DirectDigital O2 sensor control with a dedicated ethanol content sensor to deliver precise air/fuel ratio (AFR), ethanol percentage, and fuel temperature readings on a single high-contrast OLED display.

Engineered for accuracy and reliability, the ECF-1 allows tuners to capture critical metrics necessary for optimizing fuel maps and ensuring engine safety when using variable ethanol blends. The system integrates Innovate’s MTS serial communication, allowing for expanded data logging through MTS-enabled devices and LogWorks PC software.

• Manufacturer Part Number: 3903
• Display: Four-in-one high-contrast OLED screen
• Technology: Patented 100% digital DirectDigital wideband air/fuel ratio control
• Monitoring: Real-time ethanol percentage and fuel temperature
• Data Logging: MTS Serial Comms for use with MTS enabled devices and LogWorks PC software
• Included Components: ECF-1 gauge, ethanol content sensor, and wideband O2 sensor control system

The Innovate Motorsports PSN-1 PowerSafe Nitrous Bottle Pressure / Wideband O2 Gauge Kit integrates high-speed oxygen sensor control with an active safety override circuit to protect your high-performance engine. Utilizing patented DirectDigital technology, this kit monitors air/fuel ratios and bottle pressure simultaneously on a high-contrast OLED display. The integrated safety override can automatically disable your nitrous solenoid if lean conditions or pressure deviations occur, preventing potential engine damage.

Designed for precision and reliability, the PSN-1 allows for manual O2 sensor calibration to ensure maximum accuracy over time. It features MTS serial communication, allowing it to sync with other MTS-enabled devices for comprehensive data logging via LogWorks PC software. This kit provides the critical data and failsafe protection required for nitrous-fed applications.

• Patented DirectDigital O2 sensor control for industry-leading response speed
• Integrated safety override circuit disables nitrous solenoid under unsafe conditions
• Clear OLED display shows bottle pressure and wideband A/F ratio
• User-calibratable O2 sensor for maintained accuracy
• MTS serial comms for data logging with LogWorks software
• Manufacturer Part Number: 3893

The Innovate Motorsports PSB-1 PowerSafe Boost and Air/Fuel Ratio (AFR) Gauge Kit (3892) provides critical engine monitoring and automated failsafe protection for high-performance forced induction and nitrous-equipped vehicles. This all-in-one unit combines patented DirectDigital O2 sensor control with a smart safety override circuit designed to protect your engine from lean conditions.

The integrated safety override can be configured to disable a boost control solenoid—forcing the system back to wastegate spring pressure—or cut a nitrous solenoid to prevent catastrophic failure. The high-contrast OLED display is user-configurable, allowing for clear visibility of boost levels and AFR data simultaneously. This kit also features MTS Serial Comms for easy integration with other MTS-enabled devices and LogWorks PC software for advanced data logging and analysis.

• Patented DirectDigital O2 sensor control technology
• Smart safety override circuit for boost or nitrous solenoid control
• High-contrast OLED display with customizable layouts
• Wideband O2 compatibility: Leaded, Unleaded, Diesel, E85, and more
• Built-in MTS Serial Comms for data logging with LogWorks software
• Manufacturer Part Number: 3892

The Innovate Motorsports DLG-1 Dual Lambda Gauge (MPN 3891) provides a comprehensive dual-bank wideband solution in a standard 52mm (2-1/16") diameter housing. By simultaneously monitoring and displaying data from two separate wideband O2 sensors, this kit is the ideal tuning tool for V-configuration and Boxer engines where monitoring both cylinder banks is critical for engine health and performance.

Built with Innovate’s proprietary MTS (Modular Tuning System) serial communication, the DLG-1 integrates with other MTS-enabled devices to expand your data logging capabilities. This allows for deep-dive data analysis using the included LogWorks PC software. To ensure long-term precision, the gauge features a manual calibration function to compensate for sensor wear and atmospheric changes.

• Dual wideband monitoring on a single digital display
• Fits standard 52mm (2-1/16") gauge pods
• Ideal for V6, V8, and Boxer engine configurations
• MTS serial comms for logging and device chaining
• Compatible with LogWorks PC analysis software
• User-calibratable O2 sensors for maximum accuracy
• Manufacturer Part Number: 3891

The Innovate Motorsports DB-Green Gauge and LC-2 Wideband Kit provides a complete solution for precise air/fuel ratio (AFR) monitoring. Built around the patented LC-2 digital wideband controller, this kit offers the speed and accuracy required for professional engine tuning. The 52mm (2 1/16-inch) gauge features a high-brightness green LED display, providing clear visibility for real-time monitoring of your engine's combustion efficiency.

This system utilizes a Bosch 5-wire wideband O2 sensor for high-speed data acquisition. It is fully compatible with the Innovate Modular Tuning System (MTS), allowing users to expand their setup with multi-sensor interfaces or log data directly to a PC. The included LogWorks software provides a powerful platform for analyzing wideband data alongside parameters from piggyback controllers or standalone ECUs.

• Patented LC-2 Wideband Controller for superior digital accuracy
• 52mm (2 1/16-inch) diameter gauge with bright green LED display
• Bosch 5-wire wideband O2 sensor and weld-in bung included
• Compatible with Innovate MTS for daisy-chaining sensors
• Synchronous high-speed logging via LogWorks software
• Manufacturer Part Number: 3873

Kit Includes: DB-series gauge, LC-2 wideband controller, Bosch O2 sensor, mild steel weld-in bung, serial cable, and installation instructions.

The Innovate MTX-AL series (MPN 3855) combines the classic aesthetics of an analog gauge with the precision of 100% digital wideband technology. Utilizing patented DirectDigital™ signal processing, this gauge provides real-time air/fuel ratio (AFR) data with superior speed and accuracy compared to traditional analog setups. It is designed for high-performance environments, featuring a microprocessor-driven, high-torque 270-degree stepper motor that maintains needle stability under extreme shock and vibration.

• Patented DirectDigital™ wideband sensor control for maximum response speed
• High-performance 270-degree stepper motor with superior needle holding force
• User-calibratable Bosch LSU 4.9 wideband O2 sensor for long-term accuracy
• Innovate MTS serial in/out for seamless integration with data loggers and other MTX gauges
• Customizable appearance with interchangeable black and silver bezels included

The kit includes everything needed for a complete installation: the MTX-AL gauge, black and silver bezels, a Bosch LSU 4.9 wideband O2 sensor, an 8-foot sensor cable, a weld-in exhaust bung, a serial programming cable, and the installation manual.

Monitor critical engine thermal data with the Innovate Motorsports MTX-D Digital Exhaust Gas Temperature (EGT) Gauge Kit (MPN 3854). This 2-1/16 inch (52mm) digital gauge provides precise real-time EGT readings, an essential metric for tuning air-fuel ratios and protecting internal components from excessive heat during high-load operation.

Part of the MTX Digital Series, this gauge features a water-resistant casing and utilizes Innovate’s Modular Tuning System (MTS). The MTS serial connections allow the gauge to daisy-chain with other Innovate devices, enabling comprehensive data logging. The kit is designed for a professional, secure installation with locking connectors that resist vibration-induced disconnects.

• Customizable Look: Includes interchangeable silver and black bezels along with white and black faceplates to match your vehicle’s interior.
• High-Accuracy Sensing: Features a professional-grade K-Type EGT thermocouple probe for rapid response times.
• MTS Connectivity: Simplified serial integration for logging data to a PC or other Innovate hardware.
• Simplified Installation: Features locking connectors and includes a weld-in bung for the EGT probe.

Kit Includes: MTX Digital Gauge (3854), silver and black bezels, white and black faceplates, program cable, EGT K-Type probe, EGT mounting hardware with bung, and a Quick Start installation guide.

The Innovate Motorsports MTX Digital Series Dual Function Gauge (MPN 3853) allows for simultaneous monitoring of two critical engine parameters within a single 52mm (2 1/16 inch) housing. This kit provides precise digital readouts for water temperature and battery voltage, helping to protect your engine and electrical system from unexpected failure.

Engineered for professional integration, the MTX series utilizes locking connectors to ensure secure wiring in high-vibration environments. It features the Innovate MTS (Modular Tuning System) serial connection, allowing the gauge to be daisy-chained with other MTS-compatible devices for comprehensive data logging. The unit is fully customizable with included interchangeable faceplates and bezels to match your vehicle's cockpit.

• Functions: Water Temperature and Battery Voltage (Volts)
• Gauge Diameter: 52mm (2 1/16")
• Data Logging: MTS Serial In/Out for connection to LogWorks or other devices
• Customization: Includes black and white faceplates with black and silver bezels
• Installation: Locking connectors for simplified, secure wiring
• Manufacturer Part Number: 3853

Kit Includes: MTX Dual Function Gauge, black faceplate and bezel (pre-installed), white faceplate, silver bezel, serial programming cable, water temperature thermistor, and quick start installation guide.

The Innovate Motorsports MTX Digital Series Dual Function gauge integrates a high-performance vacuum/boost display and a programmable shift light into a single 2-1/16" (52mm) unit. This all-in-one solution is designed for forced induction applications where monitoring manifold pressure and precise shift timing are critical for performance and engine safety.

Built with durability in mind, the MTX series features locking connectors to ensure secure wiring under high-vibration conditions and MTS serial connections for seamless integration with other Innovate data-logging devices. The kit includes a high-accuracy 4-Bar MAP sensor, allowing for precise pressure readings from vacuum up to significant boost levels.

• Dual Functionality: Real-time digital vacuum/boost monitoring and an integrated, user-programmable shift light.
• Customizable Aesthetics: Includes both black and silver bezels and white and black faceplates to match your vehicle's interior.
• Data Logging Ready: MTS Serial In/Out allows connection to LogWorks software or other Innovate modules.
• Kit Includes: 52mm Gauge (3851), Black/Silver Bezels, White/Black Faceplates, Program Cable, 4-Bar MAP Sensor, MAP Accessory Kit (T-fitting, hose, zip ties), 6-inch RPM Harness, and Installation Guide.

The Innovate Motorsports LM-2 Basic Kit (MPN 3837) is a professional-grade tuning tool that combines a precision air/fuel ratio meter with a comprehensive 32-channel datalogger. Engineered for tuners working with everything from race carburetors and piggy-back controllers to standalone ECUs and OBD-II software, the LM-2 provides the critical data needed to optimize horsepower and engine safety. Utilizing award-winning digital signal processing (DSP) technology, this unit delivers exceptionally fast and accurate A/F ratio data under any load.

• Patented DirectDigital signal processing for high-speed air/fuel ratio data.
• Self-calibrating circuitry compensates for changes in temperature, altitude, and sensor condition.
• Two fully programmable linear analog outputs to interface with dyno computers, ECUs, and external gauges.
• Four fully-differential analog inputs for logging additional sensors.
• Includes LM Programmer software for user-defined output mapping.
• Manufacturer Part Number: 3837

Note: This is the Basic Kit and does not include an SD card for internal datalogging.

The Innovate LM-2 Pro-V (MPN 3807) combines a precision air/fuel ratio meter with a full-function 32-channel datalogger to provide a complete tuning solution. Built for professional-grade diagnostics, it works with carbureted engines, aftermarket ECUs, and OBD-II equipped vehicles to dial in maximum horsepower. The unit utilizes patented digital signal processing (DSP) technology to provide accurate data on exactly how rich or lean an engine is running at any load.

Equipped with self-calibrating circuitry, the LM-2 automatically compensates for changes in temperature, altitude, and sensor condition to maintain accuracy. It features four fully-differential analog inputs and two fully programmable linear analog outputs, allowing you to connect to external gauges, dyno computers, or piggyback controllers via the included LM Programmer software.

• Dual-channel wideband air/fuel ratio monitoring
• OBD-II scan tool functionality: read and clear DTCs and log engine data
• 32-channel internal datalogging capability
• Patented DirectDigital signal processing technology
• Self-calibrating circuitry for temperature and altitude compensation
• Two programmable 0-5V linear analog outputs
• Four fully-differential analog inputs for external sensors
• Manufacturer Part Number: 3807

The Innovate Motorsports LM-2 (MPN 3806) is a comprehensive tuning solution that combines a wideband air/fuel ratio meter, a full-function 32-channel datalogger, and OBD-II diagnostic capabilities. Utilizing patented DirectDigital signal processing, the LM-2 provides highly accurate data on exactly how rich or lean an engine is running at any load, making it an essential tool for tuning carburetors, piggy-back controllers, or aftermarket ECUs.

• Patented DirectDigital signal processing for high-speed, accurate AFR measurement.
• Integrated OBD-II scan tool functionality to read/clear DTCs and log engine data.
• Self-calibrating circuitry compensates for changes in temperature, altitude, and sensor condition.
• Two fully programmable linear analog outputs to connect to gauges, dyno computers, or ECUs.
• Four fully-differential analog inputs for auxiliary sensors.
• Includes LM Programmer software for user-defined output configuration and data analysis.

The Innovate Motorsports DB-Red Wideband Air/Fuel Ratio Gauge Kit provides a precise, cost-effective solution for real-time engine monitoring. This 52mm (2-1/16") gauge features a high-brightness red LED display, ensuring critical AFR data is visible at a glance. At the heart of the system is the patented LC-2 Wideband Controller, which provides a 100% digital signal to ensure maximum response speed and accuracy compared to older analog systems.

This kit is fully compatible with the Innovate Modular Tuning System (MTS), allowing you to daisy-chain additional sensors or log 32 channels of data directly to a PC or SD card using the included LogWorks software. Whether you are tuning a street car or a dedicated race engine, the DB-Red kit offers the data acquisition capabilities needed to optimize fuel maps and protect your engine.

• Gauge Type: 52mm (2-1/16") diameter with bright red LED readout.
• Controller: Patented LC-2 Wideband Controller for ultra-fast response times.
• Sensor: Includes a Bosch 5-wire wideband O2 sensor and weld-in bung.
• Connectivity: Serial in/out ports for high-speed data logging and MTS integration.
• Software: Includes LogWorks engine-tuning software for synchronous data analysis.
• MPN: 3796

Includes: DB-Red gauge, LC-2 wideband controller, Bosch O2 sensor, weld-on bung, serial cable, and installation instructions.

The Innovate Motorsports DB-Blue kit (MPN 3795) provides a complete, cost-effective solution for precision air/fuel ratio (AFR) monitoring. This universal 52mm (2 1/16 inch) gauge features a high-brightness blue LED display designed for clear visibility in various lighting conditions. At the core of this system is the patented DirectDigital LC-2 Wideband Controller, which provides faster and more accurate data than conventional analog wideband controllers.

Built for tuners and performance enthusiasts, the DB series utilizes the Modular Tuning System (MTS), allowing users to daisy-chain additional sensors or connect to a PL-1 data logger for comprehensive engine analysis. The included LogWorks software supports high-speed synchronous logging of wideband data alongside other MTS sensors or factory OBD2 ECU data via a PC or laptop.

• 52mm (2 1/16") DB-Blue LED air/fuel ratio gauge
• LC-2 Wideband Controller with patented DirectDigital technology
• Bosch 5-wire wideband O2 sensor for precision accuracy
• Mild steel weld-in sensor bung
• Serial cable for PC connectivity and MTS daisy-chaining
• LogWorks engine-tuning software (free download)
• Part Number: 3795

The Innovate Motorsports DB-series digital air/fuel ratio gauge provides a cost-effective and highly visible monitoring solution for tuners and performance enthusiasts. This 52mm (2 1/16-inch) gauge features a high-brightness red LED display designed for quick reference during high-performance driving or tuning sessions.

This unit is a standalone display designed to integrate seamlessly with existing Innovate Motorsports wideband lambda controller kits. It is a precise monitoring option for users who already have a compatible wideband sensor and controller setup.

• Display Type: High-brightness digital red LED
• Gauge Diameter: 52mm (2 1/16")
• Compatibility: Specifically for use with Innovate LC-1, LC-2, LM-1, or LM-2 lambda controller kits
• Mounting: Standard size fits most aftermarket gauge pods or pillar mounts
• Manufacturer Part Number: 3794
• Included Hardware: DB-series gauge, mounting hardware, and quick-start guide

The Innovate Motorsports DB Series Gauge Replacement Hardware Kit (MPN 12-0034) is designed to restore a secure mounting solution for your digital DB-series gauges. This kit provides the specific hardware needed to replace lost or damaged components, ensuring your gauge remains stable within its mounting pod or dashboard bracket during high-performance driving.

• Direct replacement for original Innovate DB series gauge hardware
• Engineered for a precise fit and vibration resistance
• Essential for new gauge pod installations or relocating existing gauges
• Genuine Innovate Motorsports component (MPN: 12-0034)

The Haltech uC-10 is a professional-grade 10-inch digital dash display designed to provide high-definition data visualization for your engine management system. This large-format display replaces traditional analog gauges with a crisp, sunlight-readable screen capable of monitoring a wide array of engine parameters, including RPM, fluid temperatures, pressures, and boost levels in real-time.

As a complete kit (HT-068000), it includes the necessary wiring harnesses and accessories required for a clean installation. The uC-10 integrates seamlessly via CAN bus with Haltech ECUs and other compatible systems, offering customizable layouts and user-definable warning triggers to ensure you stay informed of your vehicle's health on the street or the track.

• Large 10-inch high-resolution digital display for maximum visibility
• Full-color customizable screen layouts and shift light functionality
• Seamless CAN bus integration with Haltech engine management systems
• Includes complete wiring loom and mounting hardware
• Manufacturer Part Number: HT-068000

The Haltech iC-7 7-inch color display dash kit offers a professional-grade digital instrumentation solution for vehicles equipped with an OBD-II port. This kit replaces or supplements factory clusters with a high-definition, sunlight-readable screen, providing real-time engine data and diagnostic information in a customizable format.

Designed for straightforward integration, the iC-7 connects directly to the vehicle's diagnostic port to pull parameters such as coolant temperature, RPM, boost pressure, and air-fuel ratios. The high-brightness 7-inch screen ensures maximum visibility in both direct sunlight and low-light conditions, making it ideal for street and track use.

• 7-inch high-definition full-color display
• Direct OBD-II connectivity for simplified installation
• High-brightness screen for excellent legibility
• Customizable layouts to monitor critical engine parameters
• Includes OBD-II cable and necessary mounting hardware
• Series: Haltech iC-7

The Haltech gaugeART OLED CAN Gauge (HT-061010) provides high-speed, real-time data monitoring for vehicles equipped with compatible engine management systems. This 52mm digital gauge pulls data directly from the CAN bus, allowing you to cycle through and monitor critical engine parameters without the complexity of installing individual analog sensors and additional wiring.

• High-contrast OLED display ensures crisp visibility in both direct sunlight and night driving conditions
• Standard 52mm (2-inch) diameter fits most universal gauge pods and dashboard cutouts
• Direct CAN bus integration for fast data refresh rates and simplified installation
• Supports multiple customizable display pages to track various engine channels
• Manufacturer Part Number: HT-061010

Protect your high-performance fuel system from harmful contaminants with the Grams Performance 20 Micron Fuel Filter. This inline filter is engineered to provide superior filtration while maintaining the high flow rates required by modified and racing engines. By capturing particulates as small as 20 microns, it serves as a critical line of defense for your fuel injectors and engine internals.

Built for durability and precision, this filter features -6AN fittings for a secure, leak-free connection to your fuel lines. Whether you are upgrading your daily driver or building a dedicated track car, the Grams Performance filter ensures your fueling remains clean and consistent under high demand.

• Filtration Rating: 20 Micron
• Fitting Size: -6AN
• Filter Type: Inline
• Manufacturer Part Number: G60-99-0026

Monitor your fuel system with precision using the Grams Performance Universal Fuel Pressure Gauge. Designed for high-performance applications, this 1.5-inch (38.1mm) gauge features a glycerin-filled internal to dampen needle vibration, ensuring accurate readings even in high-vibration engine environments. The rugged construction utilizes a matte black stainless steel case and bezel paired with brass internals for long-term durability.

• Measurement Range: 0-120 PSI (0-8.27 bar)
• Fitting: 1/8 in. (3.175mm) NPT male
• Case Material: Matte black stainless steel
• Internal Construction: Stainless steel and brass
• Lens: Shatterproof polycarbonate
• Face Diameter: 1.5 in. (38.1mm)
• Manufacturer Part Number: G2-99-1200W

This gauge is an essential tool for setting and monitoring fuel pressure at the regulator, providing a clear, high-contrast white face for visibility at a glance. It threads directly into any standard 1/8" NPT fuel pressure port or regulator housing.