Monitor your engine's forced induction system with the precision of the Garrett Mechanical Boost Gauge. Designed for drivers who require accurate, real-time data, this gauge provides a direct reading of manifold pressure, allowing you to monitor turbocharger performance and health at a glance. It is an essential tool for verifying wastegate operation, identifying vacuum leaks, and ensuring your boost levels remain within safe parameters.

• Manufacturer Part Number: 773326-0001
• Operation: Mechanical (Direct pressure connection for lag-free readings)
• Units: PSI
• Compatibility: Universal application for turbocharged and supercharged vehicles

Built with a high-contrast face for maximum readability, this Garrett gauge offers the reliability and accuracy expected from the world leader in turbocharger technology. As a mechanical unit, it provides a physical link to your intake manifold, ensuring consistent performance without the need for external electronic sensors or complex wiring for the pressure signal.

Monitor your fuel system performance with precision using the Fuelab 71511 fuel pressure gauge. Specifically engineered for Electronic Fuel Injection (EFI) systems, this 1.5-inch gauge provides accurate, real-time monitoring to ensure your engine is receiving consistent fuel delivery at the correct pressure.

The dial features a high-visibility dual scale, providing readings in both PSI and Bar to accommodate different tuning preferences. With a wide 0-120 PSI range, it is well-suited for high-pressure fuel rails and aftermarket fuel pressure regulators. This gauge serves as a critical diagnostic tool for identifying fuel pump fatigue, clogged filters, or regulator failure.

• Manufacturer Part Number: 71511
• Gauge Diameter: 1.5 inches
• Pressure Range: 0-120 PSI / 0-8 Bar
• Scale: Dual Bar and PSI units
• Application: Designed for EFI (Electronic Fuel Injection) systems

The Fuelab 71502 is a compact, high-precision 1.5-inch mechanical fuel pressure gauge specifically engineered for low-pressure carbureted systems. Accurate fuel pressure is critical for proper float bowl levels and engine performance; this gauge allows for real-time monitoring and precise adjustment of your fuel regulator settings.

• Manufacturer Part Number: 71502
• Pressure Range: 0-15 PSI
• Dial Diameter: 1.5 inches
• Application: Carbureted fuel systems
• Designed for mounting directly to fuel rails or pressure regulator gauge ports

Monitor your fuel system performance with precision using the Fuelab 1.5in Fuel Pressure Gauge. Specifically designed for Electronic Fuel Injection (EFI) applications, this analog gauge provides a reliable readout from 0 to 120 PSI. It is an essential diagnostic tool for setting up adjustable fuel pressure regulators and ensuring your engine receives the consistent fuel delivery required for high-performance operation.

Built for durability in demanding engine bay environments, the compact 1.5-inch diameter allows for easy installation in tight spaces, such as directly onto a fuel rail or regulator port. The clear, high-contrast face ensures legible pressure readings at a glance during tuning or troubleshooting.

• Manufacturer Part Number: 71501
• Gauge Diameter: 1.5 inches
• Pressure Range: 0-120 PSI
• Application: EFI (Electronic Fuel Injection) systems
• Mounting: Direct-mount for fuel regulators or fuel rails

Restore accurate monitoring to your air helper spring system with this Firestone replacement single pressure gauge (MPN 9181). This analog gauge is a direct replacement component for specific Firestone air control systems, allowing you to monitor the PSI in your air bags directly from the cab to ensure safe load-carrying and proper ride height.

• Replacement gauge for Firestone air control kits 2225, 2229, and 2196
• High-visibility white face with easy-to-read numeric increments
• Single needle design for monitoring one air bag or a pair of linked springs
• Maintains system integrity for reliable air suspension management
• Manufacturer Part Number: 9181

The DeatschWerks 6-01-GL mechanical fuel pressure gauge provides precise, real-time monitoring of your fuel system performance. This 1.5-inch diameter gauge features a high-visibility white face and is designed for direct installation into fuel rails or regulators via its 1/8 NPT fitting.

Engineered for high-performance automotive environments, the gauge is liquid-filled to dampen needle vibration, ensuring steady and accurate pressure readings from 0 to 100 PSI even in high-vibration engine bays. The brushed aluminum housing provides a professional look and durable protection for the internal mechanism.

• Manufacturer Part Number: 6-01-GL
• Pressure Range: 0-100 PSI
• Inlet Size: 1/8 NPT
• Gauge Diameter: 1.5 inches
• Dial Face: White
• Housing Material: Brushed Aluminum / Black
• Filling: Liquid filled for vibration dampening

Monitor your fuel system with precision using the DeatschWerks 6-01-G2L mechanical fuel pressure gauge. This compact 1.5-inch gauge is designed for direct mounting to fuel rails or adjustable fuel pressure regulators featuring a 1/8-inch NPT port. It provides real-time pressure readings from 0 to 100 PSI, essential for tuning and diagnosing fuel delivery issues.

Engineered for durability in high-performance environments, the gauge is liquid-filled to dampen needle vibration, ensuring steady and accurate readings even under heavy engine harmonics. The brushed aluminum housing and high-visibility blue face offer a professional look and easy legibility in the engine bay.

• Manufacturer Part Number: 6-01-G2L
• Pressure Range: 0-100 PSI
• Fitting: 1/8in NPT male thread
• Face Diameter: 1.5 inches
• Dampening: Liquid-filled for vibration resistance
• Housing Material: Brushed aluminum
• Face Color: Blue

The DeatschWerks 0-100 PSI Mechanical Fuel Pressure Gauge provides precise, real-time monitoring of your vehicle's fuel system. This compact gauge is a critical tool for adjusting fuel pressure regulators and diagnosing fueling issues during tuning or high-performance driving applications.

Engineered for universal compatibility, the 6-01-G gauge features a standard 1/8" NPT male fitting, allowing it to bolt directly into most aftermarket fuel rails, regulators, and distribution blocks. The high-contrast face ensures clear readability of fuel pressure levels to help maintain engine safety and performance.

• Measurement Range: 0-100 PSI
• Inlet Size: 1/8" NPT Male
• Gauge Type: Mechanical
• Manufacturer Part Number: 6-01-G
• Application: Universal for fuel rails and regulators with 1/8" NPT ports

Fits 2001-2005 Honda Civic DX, EX, GX, HX, LX, Si, Hybrid, and Value Package models.

The BLOX Racing Gauge Cluster Bezel (BXGA-00203) offers a streamlined, factory-integrated solution for enthusiasts looking to mount aftermarket gauges. This unit replaces the factory instrument cluster surround, providing a clean mounting surface that maintains a clear line of sight to your OEM gauges while positioning auxiliary readouts in the driver's peripheral vision. It is an ideal interior upgrade for 7th generation Civic owners who prefer a subtle, professional installation over pillar-mounted pods.

• Manufacturer Part Number: BXGA-00203
• Precision-molded to replace factory gauge cluster trim
• Maintains factory fit and finish for a seamless cockpit look
• Designed specifically for the 2001-2005 Honda Civic chassis
• Durable construction resistant to interior heat and UV exposure

Fits 1994-2001 Acura Integra models, including GS, GS-R, LS, RS, Special Edition, and Type R.

Upgrade your vehicle's interior aesthetics with the BLOX Racing Gauge Cluster (BXGA-00202). This component is designed to refresh the look of your factory instrument panel, providing a clean, custom appearance for the third-generation Integra cockpit. Engineered for a precise fit, it integrates seamlessly with the original dashboard layout without obstructing vital gauges or warning lights.

• Precision fitment for 1994-2001 Acura Integra (DC2/DB8 chassis)
• Compatible with all trim levels, including GS-R and Type R
• Durable construction designed to withstand UV exposure and heat
• Manufacturer Part Number: BXGA-00202

Fits 1996-2000 Subaru Impreza Brighton, L, LX, Outback, and RS models.

The BLOX Racing Gauge Cluster Pod (BXGA-00200) provides a clean, factory-style mounting solution for aftermarket gauges. Designed to integrate seamlessly with the original interior, this cluster bezel allows you to monitor critical engine data without obstructing your view of the factory instrument cluster or the road ahead.

• Manufacturer Part Number: BXGA-00200
• Direct replacement for the factory instrument cluster bezel
• Positions gauges in the driver's primary line of sight
• Engineered for a precise, gap-free fitment
• Durable construction with a finish designed to match the OE interior aesthetic

Fits 1998-2007 Dodge Ram 2500 and 3500 trucks.

A failing lift pump or fuel supply system can lead to sub-standard engine performance and catastrophic damage to your expensive injection pump. The BD Diesel Low Fuel Pressure Alarm Kit provides critical, real-time monitoring of your fuel system's health. This kit features a bright red LED that illuminates immediately if the lift pump pressure drops below factory specifications, giving you the warning needed to service the vehicle before costly injection pump failure occurs.

Designed for straightforward installation, this kit is an essential safeguard for the 24-valve Cummins fuel system. It includes the necessary hardware to monitor the supply line, ensuring your high-pressure pump never runs dry.

• Manufacturer Part Number: 1081130
• Warning Indicator: High-visibility Red LED
• Primary Function: Triggers if lift pump pressure falls below spec
• Warranty: 12-Month / 12,000-Mile Limited Warranty

Fits select 1994-2003 Ford F-250, F-250 HD, F-250 Super Duty, F-350, and F-350 Super Duty (7.3L).

Protect your engine and optimize turbo performance with the Banks Power DynaFact Instrument Assembly. This dual-gauge kit allows 7.3L Power Stroke owners to monitor critical exhaust gas temperatures (EGTs) and intake manifold pressure in real-time. The DynaFact pyrometer features a spring-loaded, jeweled movement that provides superior resistance to diesel engine vibration, ensuring high accuracy within +/- 15°F at peak operating temperatures. The mechanical boost gauge provides an immediate, reliable reading of turbo output from 0 to 50 psi.

Both gauges feature clear, easy-to-read faces with LED backlighting for visibility in all lighting conditions. The assembly includes a 2-gauge mounting panel designed for seamless integration into your Ford truck's interior. This kit is an essential diagnostic and monitoring tool for towing, hauling, or high-performance applications where managing heat and turbo pressure is critical to engine longevity.

• Manufacturer Part Number: 64212
• 0-1500°F Pyrometer with jeweled movement for vibration resistance
• 0-50 psi Boost Gauge for turbo performance monitoring
• LED backlit faces for nighttime visibility
• Includes 2-gauge mounting panel
• Banks DynaFact mechanical precision
• 1-Year Limited Warranty

The AutoMeter 990414 Standard Right Angle Speedometer Cable Adapter is an essential solution for tight installations where a standard cable radius bend is impossible due to space constraints. This heavy-duty adapter allows for a precise 90-degree transition, preventing cable binding and ensuring smooth operation of mechanical speedometers.

• Construction: Lightweight aluminum housing with a durable black powder coat finish for corrosion resistance.
• Fitment: 5/8"-18 Male to Female threads for seamless integration with standard mechanical speedometer cables.
• Specifications: Features a .104" square drive and a 1:1 ratio to maintain accurate speed readings without calibration changes.
• Dimensions: Compact 1.16" x 2.15" x 2.5" profile.
• Weight: 10 oz.
• Part Number: 990414

Restore the accuracy of your instrumentation with the AutoMeter 990344 ES series replacement temperature sensor. This sender is specifically engineered for use with AutoMeter Marine short sweep electric air core gauges, providing the precise resistance signal required for critical engine monitoring.

This sensor features a primary 1/8" NPTF male thread and comes with the necessary hardware to adapt to larger ports, ensuring a leak-free seal and reliable thermal conductivity. Whether you are performing a fresh installation or replacing a failed sender, this kit provides the components needed for a professional finish.

• Manufacturer Part Number: 990344
• Thread Size: 1/8" NPTF Male
• Gauge Compatibility: AutoMeter Marine Short Sweep Electric Air Core
• Included Adapters: 3/8" NPT and 1/2" NPT bushings

The AutoMeter 9117 Tach Adapter is a specialized signal converter designed for vehicles equipped with modern distributorless ignition systems (DIS) or coil-per-cylinder setups. This module installs into the ignition system power supply to sense current and generate a conventional 12V square wave signal output. This allows for the seamless integration of AutoMeter tachometers and aftermarket RPM-activated devices in vehicles where a traditional tach signal is not available.

Built to withstand harsh engine bay environments, the module features a fully potted, environmentally sealed housing that is both weatherproof and vibration-resistant. It is a critical component for late-model engine swaps and high-performance builds requiring accurate RPM data from electronic ignition systems.

• Output Signal: 12V square wave
• Environmental Protection: Fully potted and weatherproof for underhood mounting
• Module Dimensions: 1.5 in. x 3.5 in. x 2 in.
• Wire Lead Lengths: Gray (signal out) 52 in.; Black (ground) 24 in.; Red & Red/Green (ignition power) 24 in.
• Manufacturer Part Number: 9117

The AutoMeter 9109 Fuel Bridge is a specialized signal adapter designed to solve compatibility issues between mismatched fuel level gauges and sending units. This module wires directly between the gauge and the sending unit, allowing you to use any AutoMeter fuel level gauge with virtually any stock or aftermarket sending unit, regardless of their ohm ranges.

Calibration is simplified through a triple push-button interface and an integrated LED display, which enables precise mapping of the sender's signal to the gauge's requirements. The compact housing allows for versatile mounting behind the dashboard or in the engine bay. Additionally, the unit features a programmable low fuel warning output that triggers at 10% capacity and resets at 15%, suitable for driving an external warning LED or a relay.

• Manufacturer Part Number: 9109
• Function: Interfaces any AutoMeter fuel gauge with any ohm-range sending unit
• Controls: Triple push-button setup with digital LED display for calibration
• Low Fuel Warning: On at 10%, Off at 15% (outputs for LED or relay)
• Dimensions: 3-1/8" W x 2-1/2" T x 3/4" D

Monitor your fuel levels with precision using the AutoMeter Jeep Series 52mm (2-1/16 in.) short sweep electric fuel level gauge. Designed to match the classic aesthetic of Jeep instrumentation, this gauge is calibrated for the common 73 ohms empty to 8-12 ohms full resistance range found in most pre-1989 Ford (including pre-1987 Mustang) and Chrysler factory sending units.

• Slosh Dampening: Features a patented air-core meter movement with extra dampening to provide steady, accurate readings even in non-baffled fuel tanks during off-road or spirited driving.
• Electrical Compatibility: 12 and 16-volt compatible, making it suitable for nearly any street or race car electrical system.
• Complete Kit: Includes a bulb and socket assembly, red and green bulb covers for custom lighting, and all necessary mounting hardware.
• Reliable Performance: Race-proven electric instruments ensure quick response and long-term durability in demanding environments.

Specifications:
Manufacturer Part Number: 880428
Diameter: 52mm (2-1/16 in.)
Resistance Range: 73 Ohms Empty / 8-12 Ohms Full
Movement: Air-Core Electric Short Sweep

Fits select 2010-2017 Dodge and Ram 1500, 2500, and 3500 trucks across various trims including Laramie, SLT, and Tradesman.

Protect your engine by monitoring critical fuel delivery with the AutoMeter Factory Match series fuel pressure gauge. Designed specifically to blend seamlessly with the interior aesthetics of 4th Generation Dodge Ram trucks, this 52.4mm (2-1/16 in) gauge features a digital stepper motor for professional-grade accuracy. Whether your vehicle is fuel-injected or carbureted, the included 1/8-inch NPT solid-state pressure transducer delivers precise measurements with superior resistance to high-vibration and high-heat environments.

This electronic gauge includes a direct plug-in wiring harness for a simplified installation process. For enthusiasts looking to track performance over time, the unit provides a 0.5 - 4.5V analog output, making it fully compatible with most data logging systems and ECU interfaces.

• Manufacturer Part Number: 8561
• Range: 0-30 PSI
• Size: 52.4mm (2-1/16 in)
• Movement: Full Sweep Digital Stepper Motor
• Sensor: 1/8" NPT Solid State Pressure Transducer
• Output: 0.5 - 4.5V analog output for data logging
• Electrical Compatibility: 12V and 16V systems
• Included Hardware: Wiring harness and mounting hardware

Fits select 2003-2009 Dodge Ram 2500 and 3500 (Laramie, SLT, Sport, ST, SXT, TRX4).

Monitoring exhaust gas temperature (EGT) is critical for preventing catastrophic engine damage in high-output diesel and forced induction applications. The AutoMeter Factory Match series EGT gauge uses a race-proven digital stepper motor to provide precise measurement with a self-calibration sequence during every power-up. Designed to integrate seamlessly with your truck's interior, this gauge features high-definition LED backlighting for effortless viewing in any lighting condition.

The included fast-acting Type K thermocouple ensures maximum accuracy and minimum response time, allowing you to react quickly to temperature spikes. The 8544 kit is compatible with 12-volt and 16-volt electrical systems, making it suitable for both street and race applications.

• Range: 0-1600°F
• Diameter: 2-1/16in (52.4mm)
• Movement: Digital Stepper Motor with Full Sweep
• Backlighting: High-Definition LED
• Voltage: 12V and 16V compatible
• Includes: Type-K Thermocouple, wiring harness, thermocouple mounting kit, and mounting hardware
• Manufacturer Part Number: 8544

Fits select 2010-2017 Dodge Ram 1500, 2500, and 3500 trucks.

Designed to integrate seamlessly with the factory interior of Gen 4 trucks, the AutoMeter Gen 4 Dodge Factory Match mechanical boost gauge (MPN 8509) provides precise monitoring for high-boost applications. This gauge features an ultra-precise bourdon tube meter movement, ensuring mechanical accuracy and long-term durability without the need for an electrical pressure sensor. The direct-mount 1/8" NPT pressure connection simplifies the installation process for gasoline or diesel forced-induction engines.

• Manufacturer Part Number: 8509
• Gauge Diameter: 52.4mm (2-1/16")
• Range: 0-100 PSI
• Movement Type: Mechanical bourdon tube
• Installation Kit: Includes 1/8" nylon line and mounting hardware
• Fittings Included: 1/8" NPT compression fittings and 1/4" NPT adapter

Fits 1999-2007 Ford F-250 and F-350 Super Duty trucks.

Maintaining proper transmission fluid temperature is the single most important factor for the longevity of your automatic transmission. The AutoMeter Factory Match series gauge (MPN 8457) provides the laboratory-grade accuracy needed for heavy towing or high-performance applications, styled specifically to match the OEM interior of your Ford Super Duty. This 52.4mm full-sweep gauge utilizes a high-precision digital stepper motor to provide real-time fluid temperatures from 100-260°F.

Every gauge undergoes a self-calibration sequence upon power-up to ensure maximum precision. The kit includes AutoMeter’s advanced 1/8" NPT temperature transducer and a direct plug-in wiring harness for a clean, efficient installation process.

• Brand: AutoMeter
• Series: Factory Match
• MPN: 8457
• Diameter: 52.4mm (2-1/16")
• Range: 100-260°F
• Display: Full-sweep electronic digital stepper motor
• Sensor: 1/8" NPT temperature transducer included
• Harness: Direct plug-in wiring harness included

Fits select 1999-2007 Ford F-250 and F-350 Super Duty (V8-6.0L / V8-7.3L / V10-6.8L / V8-5.4L).

The AutoMeter Factory Match 8445 EGT Pyrometer Gauge provides precision monitoring of exhaust gas temperatures, a critical metric for high-output diesel and forced induction Ford Super Duty applications. Excessive EGTs can lead to catastrophic engine component failure; this gauge utilizes a digital stepper motor for smooth, accurate needle movement and an included Type K thermocouple to ensure rapid response times to temperature fluctuations.

Engineered to integrate seamlessly into your truck's cabin, the Factory Match series replicates the OE Ford gauge aesthetic. The 52.4mm gauge features high-definition LED backlighting for visibility in all conditions and a direct plug-in harness to simplify the installation process. It is fully compatible with 12V and 16V electrical systems found in both street and race applications.

• Manufacturer Part Number: 8445
• Gauge Size: 52.4mm (2-1/16")
• Range: 0-2000°F
• Movement: Full Sweep Electronic Digital Stepper Motor
• Sensor: Type K Thermocouple (Included)
• Electrical: 12V and 16V compatible
• Included Hardware: Type K Thermocouple, wiring harness, and mounting hardware

Fits 1999-2007 Ford F-250 and F-350 Super Duty trucks across all trim levels including XL, XLT, Lariat, King Ranch, and Harley-Davidson editions.

Monitoring exhaust gas temperatures (EGT) is critical for high-output diesel and forced induction engines to prevent catastrophic internal damage. The AutoMeter Factory Match series provides a seamless OEM aesthetic for your Ford truck, combining laboratory-grade data with a stock interior look. This 52.4mm (2-1/16") gauge utilizes a high-precision digital stepper motor for smooth needle movement and high-definition LED backlighting for effortless visibility in all lighting conditions.

This comprehensive kit includes a high-accuracy Type K thermocouple and a direct plug-in wiring harness for a simplified installation. Designed for professional-grade reliability, it is compatible with both 12V and 16V electrical systems, ensuring rapid response times and accurate readings under heavy towing or high-boost conditions.

• Series: Factory Match
• Part Number: 8444
• Measurement Range: 0-1600° F
• Diameter: 52.4mm (2-1/16")
• Movement: Full Sweep Digital Stepper Motor
• Included: Type K Thermocouple, mounting hardware, and wiring harness
• Electrical Compatibility: 12V and 16V systems

Fits 1999-2007 Ford F-250 and F-350 Super Duty trucks. Designed to blend seamlessly with your vehicle's interior, this AutoMeter Factory Match series gauge provides critical manifold pressure data with the look and feel of OEM instrumentation. The 0-60 PSI range makes it an ideal choice for high-boost diesel applications and performance forced-induction builds.

Built for reliability, this mechanical gauge utilizes a precision bourdon tube meter movement to ensure accuracy and long-term durability. Because it is a mechanical unit, it requires no electrical sender hookup for operation, relying instead on a direct 1/8" NPT pressure connection. The kit includes everything needed for a clean installation on your Ford Super Duty.

• Gauge Diameter: 52.4mm (2-1/16")
• Pressure Range: 0-60 PSI
• Movement: Precision mechanical bourdon tube
• Styling: Ford Factory Match series design
• Connection: 1/8" NPT
• Manufacturer Part Number: 8405

Includes: 1/8" nylon line kit, 1/8" NPT compression fittings, 1/4" NPT adapter, mounting hardware, and detailed installation instructions.

Fits select 1999-2007 Ford F-250 and F-350 Super Duty trucks across all trim levels, including XL, XLT, Lariat, King Ranch, and Harley-Davidson Edition.

The AutoMeter Factory Match series is engineered to provide seamless aesthetic integration with your Ford's original instrumentation. This 52.4mm (2-1/16 inch) mechanical boost gauge delivers immediate, reliable monitoring of turbocharger or supercharger pressure from 0 to 35 PSI. Utilizing a high-precision bourdon tube meter movement, this unit offers the accuracy and vibration resistance required for heavy-duty diesel and gasoline applications.

Designed for straightforward installation, the mechanical operation requires no electrical sensors for pressure measurement. The 1/8 inch NPT pressure connection allows for a direct link to the intake manifold, ensuring you have a real-time data point for engine performance and turbo health.

• Manufacturer Part Number: 8404
• Gauge Type: Mechanical Boost
• Pressure Range: 0-35 PSI
• Size: 52.4mm (2-1/16")
• Movement: Precision Bourdon Tube
• Connection: 1/8" NPT

Includes: 1/8" nylon line kit, 1/8" NPT compression fittings, 1/4" NPT adapter, mounting hardware, and detailed installation instructions.

The AutoMeter Phantom II 7503 mechanical vacuum/boost gauge is a high-performance monitoring solution for forced induction applications. Built around a patented, high-precision Bourdon tube meter movement, this gauge delivers the accuracy and durability required for both street and professional racing environments. Because it utilizes a mechanical movement, it requires no electrical hookup for operation, making it a reliable choice for any vehicle regardless of electrical system capacity.

This 52.4mm (2-1/16 inch) gauge features a clean white face and black bezel for superior readability. The simple 1/8" NPT pressure connection ensures a straightforward installation process into your intake manifold or vacuum source.

• Range: 30 In. Hg (Vacuum) / 30 PSI (Boost)
• Movement: High-precision mechanical Bourdon tube
• Size: 52.4mm (2-1/16")
• Connection: 1/8" NPT
• Manufacturer Part Number: 7503

Kit Includes: 1/8" nylon line, T-fitting, vacuum fitting, compression fittings, mounting hardware, and detailed installation instructions.

Fits select 1999-2007 Ford F-250 and F-350 Super Duty models. The AutoMeter 7077 Black Triple Pillar Gauge Kit is a comprehensive monitoring solution for diesel truck owners who need real-time data on critical engine parameters. This complete kit replaces or overlays your factory A-pillar with a durable triple-gauge mount, providing a professional, integrated look for your interior.

This kit includes the most essential gauges for towing and performance: an exhaust gas temperature (EGT) pyrometer, a boost gauge, and a transmission temperature gauge. These instruments allow you to monitor thermal loads and turbocharger output to prevent overheating and ensure your drivetrain is operating within safe limits.

• Part Number: 7077
• Mount Type: Black Triple Gauge A-Pillar Pod
• Included Gauges: Pyrometer (EGT), Boost, and Transmission Temperature
• Finish: Black
• Fitment: 1999-2007 Ford F-250 / F-350 Super Duty
• Kit Contents: Triple pillar mount, three gauges, and necessary installation hardware

Fits 1987-1995 Jeep Wrangler YJ (Base, Islander, Laredo, Renegade, Rio Grande, S, Sahara, SE, and Sport).

Monitor your vehicle's vitals with precision using the AutoMeter 7040 Jeep Series Direct-Fit Dash Gauge Kit. This comprehensive package replaces the factory instrument cluster with a rugged, thermoformed ABS plastic dash panel that requires no cutting or modification. The panel features a black textured finish that can be painted to match your interior and includes specific cutouts for factory accessory controls, air vents, and your radio.

At the core of this kit are seven iconic, officially licensed Jeep Series electric air-core gauges. These highly responsive instruments provide real-time data for all essential engine and drivetrain parameters. The kit includes the necessary mounting hardware, a universal wiring harness, and the specific senders required for installation.

• Gauge Dimensions: (2) 3-3/8" Speedometer and Tachometer; (5) 2-1/16" Water Temp, Oil Pressure, Transfer Case Temp, Fuel Level (0-90 Ohm), and Voltmeter.
• Included Senders: 1/8" NPT water and transfer case temperature senders, plus an oil pressure sender.
• Hardware: 1/4", 3/8", and 1/2" NPT adapter fittings and a universal 6-gauge wiring harness.
• Panel Construction: Durable, paintable ABS plastic with a black textured finish.
• MPN: 7040

Monitor your forced induction system with precision using the AutoMeter Cobalt Digital Vacuum/Boost Gauge (6959). This 52.4mm (2-1/16 inch) gauge is engineered to provide professional-grade accuracy across a range of 30 inHg to 30 PSI. It utilizes a race-proven digital stepper motor and a patented self-calibration sequence on every power-up, automatically compensating for changes in altitude and barometric pressure to ensure your readings remain exact regardless of atmospheric conditions.

• Includes a data acquisition grade solid-state MAP sensor for durability in high-performance environments.
• Digital stepper motor drive provides smooth, precise needle movement and superior accuracy.
• Self-calibration at startup maintains precision in varying altitudes and weather.
• Compatible with standard 12-volt and 16-volt automotive electrical systems.
• Complete kit includes MAP sensor, T-fitting, nylon tubing, vacuum fittings, wiring harness, and mounting hardware.
• Manufacturer Part Number: 6959