Fits 1997-2006 Jeep Wrangler (SE, Sport, Sahara, Rubicon, Unlimited, and X).

Refresh your vehicle's front end with these Rugged Ridge black headlight bezels. Specifically engineered for a direct fit on 1997-2006 Jeep models, these bezels serve as a durable replacement for faded or damaged factory trim. Each unit is constructed from UV-treated material to resist the chalking and fading caused by sun exposure, ensuring a clean and consistent appearance over time. They are designed to attach directly to the factory mounting points using your Jeep's existing hardware for a hassle-free installation.

• Direct-fit replacement for 1997-2006 Jeep Wrangler headlight trim
• UV-treated finish prevents sun-induced fading and discoloration
• Installs to original factory mounting points for precise alignment
• Retains use of factory hardware; no drilling or modification required
• Sold as a pair (includes driver and passenger side bezels)
• Manufacturer Part Number: 12419.23
• Backed by a Limited 5-Year Warranty

Fits select 2003-2008 Acura MDX and Honda Pilot models. This Westin Safari Light Bar Mount Kit is a vehicle-specific bracket system designed to provide a secure, stable mounting point for the Safari Bull Bar (sold separately).

Engineered for a precise fit on the Acura MDX and Honda Pilot chassis, this kit utilizes factory mounting points to allow for a clean, no-drill installation on most applications. Each bracket set is finished in a durable black powder coat to resist corrosion and integrate seamlessly with your vehicle's front-end styling.

• Required for installation of Westin Safari Light Bars/Bull Bars
• Custom-fit brackets specifically designed for 2003-2008 MDX and Pilot
• No-drill installation process preserves factory components
• Includes all necessary mounting hardware and detailed instructions
• Durable black finish for long-term weather resistance
• Manufacturer Part Number: 30-1255

Fits 2002-2006 Honda CR-V (EX, LX, and SE).

The Westin Safari Light Bar Mount Kit is the vehicle-specific hardware required to install a Westin Safari Light Bar. Engineered for a precise fit on the 2002-2006 Honda CR-V chassis, this kit provides a secure and stable foundation for your front-end protection without the need for custom fabrication.

• No-Drill Installation: Bolts directly to existing factory mounting points for a clean, straightforward install.
• Vehicle-Specific Engineering: Each mount kit is customized to the specific frame and bumper configuration of the CR-V to ensure proper clearance and alignment.
• Complete Hardware Included: Comes with all necessary brackets, bolts, and detailed instructions to complete the installation.
• Durable Finish: The brackets are finished in a corrosion-resistant black coating to match your light bar and withstand road debris.

Note: This is the mounting kit only; the Safari Light Bar/Bull Bar is sold separately.

Fits select 2018-2026 Jeep Wrangler and 2020-2025 Jeep Gladiator models.

The Westin LED Cowl Mount provides a secure, low-profile mounting solution for a 40-inch single-row LED light bar. Engineered specifically for the Jeep cowl area, these brackets are manufactured from durable die-cast aluminum to ensure stability and vibration resistance during off-road use. The textured black powder coat finish is designed to complement factory trim while providing superior weather resistance.

Installation is a straightforward bolt-on process that utilizes the existing factory cowl mounting points, requiring no drilling or permanent vehicle modifications. To protect your Jeep’s paint, Westin includes foam gaskets to be placed between the mount and the body. Each set comes complete with stainless steel fasteners for maximum corrosion protection in harsh environments.

• Fits a 40-inch single row LED light bar (sold separately)
• Durable die-cast aluminum construction
• Corrosion-resistant stainless steel mounting hardware
• Textured black powder coat finish matches OEM trim
• No-drill, bolt-on installation using factory cowl points
• Foam gaskets included to protect vehicle finish
• Includes: Pair of mounts and all necessary hardware
• Manufacturer Part Number: 62-41075
• 3-Year Warranty

The SeaSucker Flex-X Phone Mount (EL6013B-6) offers a high-strength, non-permanent mounting solution for mobile devices, utilizing a powerful vacuum cup to secure your phone to any smooth, non-porous surface. Unlike traditional suction cups, the SeaSucker vacuum mount provides a significantly more reliable hold, making it ideal for use on glass, polished dashboards, or interior trim panels where drilling is not an option.

This mount features a flexible gooseneck arm that allows for precise positioning and optimal viewing angles. The universal cradle design provides a secure, spring-loaded grip that keeps your device stable even in high-vibration automotive environments. It is easily removable and transferable between vehicles, leaving no marks or residue behind.

• Signature SeaSucker vacuum mount for superior holding power
• Flexible gooseneck arm for multi-angle adjustment
• Universal spring-loaded cradle fits a wide range of smartphone sizes
• Tool-free installation on any smooth, non-porous surface
• Manufacturer Part Number: EL6013B-6

The SeaSucker weBoost Mount (SM6174) provides a high-strength, non-permanent solution for mounting cellular signal booster antennas. Utilizing SeaSucker's signature vacuum mount technology, this bracket allows you to secure your antenna to any smooth, non-porous surface—including glass, metal, or fiberglass—without the need for drilling or permanent vehicle modifications.

Perfect for overlanding, RVing, or temporary mobile office setups, this mount ensures your antenna remains upright and secure even at highway speeds. The integrated vacuum pump features a safety indicator band to verify a secure seal at a glance, providing peace of mind during long hauls through remote areas.

• Mounts to vehicle roofs, windows, or body panels without drilling holes
• Utilizes a powerful 4.5-inch vacuum cup with integrated pump
• Compatible with standard thread patterns found on weBoost antennas
• Constructed from UV-resistant materials and stainless steel hardware for long-term outdoor exposure
• Easy to install and remove in seconds, making it ideal for leased vehicles or temporary setups
• Manufacturer Part Number: SM6174

The SeaSucker Flex-X XL provides a secure, non-permanent mounting solution for larger smartphones and mobile devices. Built around a powerful 4.5-inch vacuum mount with 120 lbs of pull strength, this holder attaches to glass, metal, or fiberglass surfaces without the need for drilling or permanent hardware. The flexible 7-inch arm allows for precise positioning, ensuring your device remains visible at the perfect angle while driving, boating, or working.

This XL version is specifically designed to accommodate plus-sized phones and devices with thick protective cases. The RAM X-Grip cradle uses a four-leg design that provides great holding power without hiding your phone behind foam pads or plastic. Marine-grade materials and stainless steel hardware ensure long-lasting durability in harsh environments.

• Part Number: EL6014B-6
• Mount Type: 4.5-inch SeaSucker vacuum mount (rated for 120 lbs pull strength)
• Cradle: Large RAM X-Grip for oversized smartphones
• Arm: 7-inch flexible gooseneck for multi-angle adjustment
• Construction: UV-resistant materials and stainless steel hardware
• Installation: Tool-free, non-marking vacuum attachment

Capture stable, high-angle footage without drilling into your vehicle with the SeaSucker EL5999 Action Camera Mount. Designed for professional-grade reliability, this mount utilizes a 4.5-inch vacuum cup to provide a powerful, temporary hold on any smooth, non-porous surface, including glass, body panels, and gelcoat.

• Features a signature SeaSucker 4.5-inch vacuum cup with a pump-action attachment system.
• Includes a standard 1/4-20 threaded stainless steel stud, compatible with most camera tripods and action camera adapters.
• Built-in vacuum indicator band alerts you if the cup loses pressure, ensuring gear safety.
• Easy to install and remove in seconds without leaving marks or damaging paint.
• Rated for high-speed use on vehicle exteriors and boats.
• Manufacturer Part Number: EL5999

Capture stable, high-angle footage from virtually any smooth surface with the SeaSucker Action Camera Flex Mount (EL5998-6). This mounting solution utilizes SeaSucker’s signature vacuum cup technology to provide a high-strength, non-permanent attachment point on glass, fiberglass, and painted metal surfaces. Unlike adhesive mounts, this vacuum cup can be repositioned instantly and removed without leaving residue or damaging the finish.

• Equipped with a powerful SeaSucker vacuum cup for secure mounting on vehicles, boats, and aircraft.
• Integrated 6-inch flexible arm allows for 360-degree camera orientation and precise angle adjustments.
• Designed to withstand high-speed wind resistance and vibrations during high-performance use.
• Constructed with UV-resistant materials and corrosion-resistant hardware for marine and outdoor environments.
• Compatible with most standard action camera mounting systems.
• Manufacturer Part Number: EL5998-6

Fits 1987-1995 Jeep Wrangler YJ models including Base, Islander, Laredo, Renegade, Rio Grande, S, Sahara, SE, and Sport.

Refresh your Jeep’s front-end styling with these Rugged Ridge headlight bezels. Engineered as a direct-fit replacement for factory trim, these bezels are constructed from UV-treated materials to prevent chalking, cracking, and fading from sun exposure. They provide a clean, blacked-out look that complements any paint color while maintaining the classic rectangular headlight profile of the YJ generation.

Installation is designed to be simple and efficient, utilizing factory mounting points and original hardware. This ensures a secure fit without the need for drilling or permanent modifications. Sold as a pair, this kit provides a complete solution for restoring or customizing both the driver and passenger side headlamps.

• UV-treated black finish for long-term weather resistance
• Direct-fit replacement for OE headlight trim
• Installs to factory mounting points using original hardware
• Sold as a set of two (pair)
• Manufacturer Part Number: 12419.24
• Backed by a Limited 5-Year Warranty

Fits 1997-2006 Jeep Wrangler TJ, including Rubicon, Sahara, Sport, and Unlimited models.

Expand your off-road lighting capabilities with the Rugged Ridge Dual A-Pillar Light Mount. This bracket system allows you to mount two auxiliary lights on each side of your windshield, providing significantly more trail visibility during night excursions. By positioning the lights at the A-pillar, you gain a higher vantage point for flood or spot beams that factory headlights cannot match.

Engineered for durability on the trail, these mounts are constructed from heavy-duty steel and finished with a textured black powder coat to resist corrosion and scratches. Installation is straightforward and requires no drilling or cutting; the brackets bolt directly to the lower windshield mount using the existing factory mounting points and hardware.

• Dual light configuration (mounts two lights per side)
• Heavy-duty steel construction
• Textured black powder-coated finish
• Direct bolt-on installation using factory holes
• No drilling or vehicle modification required
• Manufacturer Part Number: 11232.36

Fits 2007-2018 Jeep Wrangler JK and JK Unlimited models including Rubicon, Sahara, Sport, and X.

The Rugged Ridge Windshield Mount Light Bar features a heavy-duty, three-piece design engineered to support up to five auxiliary lights. Constructed from 2-inch diameter steel tubing with a durable textured black finish, this bar provides a rugged off-road appearance without requiring permanent vehicle modifications. A key design feature is the integrated wind deflector located beneath the main bar, which significantly reduces the whistling and soft-top buffeting common with over-the-windshield lighting setups.

Installation is straightforward, utilizing the factory windshield hinge mounting points for a secure, no-drill fit. The bar is compatible with Rugged Ridge light mount brackets and mirror relocation brackets, allowing for a versatile accessory configuration.

• Five-tab mounting system for auxiliary lighting
• Integrated wind deflector reduces wind noise and cabin buffeting
• Heavy-duty 2-inch diameter steel tubing
• Durable textured black powder coat finish
• Bolt-on installation requires no drilling or cutting
• Manufacturer Part Number: 11232.21

Fits 2024-2026 Ford Ranger (all trims: XL, XLT, Lariat, Raptor).

This A-pillar bracket is designed to mount Rigid pod lights to your Ford Ranger. It attaches to the factory A-pillar location using existing mounting points, providing a clean and secure base for off-road lighting. Made from 304 stainless steel with a scratch and UV-resistant coating, it withstands harsh conditions. Compatible with all Rigid pod lights, including 4-inch 360-Series, D-Series, D-SS, and Radiance Pods. (Lights sold separately.)

• 304 stainless steel construction
• Scratch and UV-resistant black coating
• Direct fit to factory A-pillar location
• Compatible with Rigid 4" 360-Series, D-Series, D-SS, and Radiance Pods

Fits all 2024-2026 Toyota Tacoma models. The Rigid Industries A-Pillar Mount provides a secure, low-profile solution for adding pod lights to your Tacoma’s A-pillars. Constructed from 304 stainless steel and protected by a scratch- and UV-resistant black coating, this bracket withstands off-road abuse and corrosive elements. It is designed to accept Rigid’s 4-inch 360-Series, D-Series, D-SS, and Radiance pod lights.

• 304 stainless steel construction
• Scratch- and UV-resistant coating
• Compatible with 4-inch Rigid pod lights (360-Series, D-Series, D-SS, Radiance)
• Direct bolt-on for 2024-2026 Toyota Tacoma

Lights sold separately. Rigid Industries part number 46751.

Fits select 2021-2026 Ford F-150 models, including King Ranch, Lariat, Limited (2021-2023), Platinum, Police Responder, Raptor, SSV, STX (2024-2026), Tremor, XL, and XLT.

The Rigid Industries D-SS A-Pillar Kit is a complete lighting solution that mounts a pair of D-SS auxiliary lights to the A-pillar of your truck. Each kit includes vehicle-specific mounting brackets, all necessary hardware, and two Rigid D-SS LED lights for straightforward installation.

• Direct fit for 2021-2026 Ford F-150 A-pillar locations
• Includes two D-SS lights, mounts, and hardware
• Fully adjustable light positioning
• Complete kit—no additional parts required

Manufacturer part number: 46737

Fits select 2020-2026 Ford F-250 Super Duty (King Ranch, Lariat, Limited 2020-2024, Platinum, XL, XLT) and F-350 Super Duty (King Ranch, Lariat, Limited 2020-2024, Platinum, XL, XLT).

This dual fog light mounting kit from Rigid Industries allows you to install RIGID D-Series light pods into the factory fog light position. The brackets bolt directly to the OEM mounting points, and all necessary hardware is included. The stainless steel construction and UV/abrasion-resistant powder coat finish provide lasting durability in off-road conditions.

• Mounts two RIGID D-Series pods in OEM fog lamp pockets
• Stainless steel bracket construction
• UV and abrasion resistant powder coat
• Includes mounting hardware
• Manufacturer part number: 46733

Complete vehicle fitment:

Fits 2020-2026 Ford F-250 and F-350 Super Duty (all submodels except 2025-2026 Limited). This Rigid Industries mounting kit provides a direct-fit solution for installing a 30-inch light bar on the front bumper. The brackets are formed from stainless steel and finished with a UV- and abrasion-resistant powder coat to withstand harsh environments. The kit includes all necessary mounting hardware and brackets; it accepts Rigid SR-Series curved or E-Series 30-inch light bars. Installation uses factory mounting points with no drilling required.

• Stainless steel construction
• UV- and abrasion-resistant powder coat finish
• Fits 30-inch Rigid SR-Series (curved) and E-Series light bars
• Includes brackets and hardware
• Manufacturer part number: 46732

Fits 2021–2026 Ford Bronco models equipped with the Ford Performance Heavy Duty Modular Bumper (all trims, including Badlands, Big Bend, Outer Banks, Raptor, and others).

The Rigid Industries Triple SR-M Fog Light Kit gives your Bronco a complete lighting upgrade with six compact, high-output SR-M LED pods designed specifically for the modular bumper. The kit includes two SAE-compliant fog lights (wide, cutoff pattern), two drive beams (mid-range fill), and two spot beams (long-range reach) — all mounted on precision stainless steel brackets that bolt to the factory bumper points. A UV- and abrasion-resistant powdercoat finish ensures the brackets hold up in harsh conditions.

• Six SR-M series LED pods: 2 SAE Fog, 2 Drive, 2 Spot
• Stainless steel mounting brackets with durable powdercoat
• Complete wiring harness and connectors — everything needed for a clean install
• Direct-fit for 2021–2026 Ford Bronco with Heavy Duty Modular Bumper
• Detailed installation instructions included

The entire kit is purpose-built to integrate seamlessly with your Bronco's factory modular bumper, delivering dramatically better forward visibility while maintaining a factory-like fit and finish.

This RIGID Roof Pod Mount is designed for the 2021+ Bronco and allows for a clean install of RIGID's high output LED lighting. This Bronco Roof Pod Mount fits eight of RIGID's 4 in. 360-Series. Own The Night with RIGID's Roof Pod Mount for your 2021 Ford Bronco. All of RIGID's OE Brackets and Mounts are made with stainless steel and covered with UV and abrasion resistant powder coat to ensure years of use in the harshest conditions. Professional installation recommended.

• Fits Up To Eight 4 Inch 360-Series Lights
• UV and Abrasion Resistant Powder Coat
• Stainless Steel Construction

This Part Fits:

Fits select 2005-2015 Nissan Xterra, 2005-2020 Nissan Frontier, and 2016-2020 Nissan Pathfinder models. This Rigid Industries A-pillar mounting kit provides a secure mounting point for LED pod lights, keeping wiring tidy and maintaining a factory appearance.

Designed to accept Rigid 4-inch 360-Series, D-Series, and Radiance pods (sold separately), the brackets bolt to the factory A-pillar locations. Construction is stainless steel with a UV and abrasion-resistant black powder coat for long-term durability in harsh conditions.

• Fits Rigid 4" 360-Series, D-Series, and Radiance pods
• Stainless steel construction
• UV and abrasion-resistant powder coat finish
• Professional installation recommended; instructions included
• Rigid part number: 46728

Fits select 2021-2026 Ford Bronco models equipped with the factory roof rack. This RIGID roof rack mount kit provides a solid, direct-fit mounting solution for a 40-inch SR-Series PRO straight LED light bar. The bracket is fabricated from stainless steel and finished in a UV- and abrasion-resistant powder coat, ensuring long-term durability in harsh conditions.

• Stainless steel construction
• UV- and abrasion-resistant powder coat
• Compatible with RIGID 40-inch SR-Series PRO straight LED light bars
• Mounts to factory roof rack attachment points
• Professional installation recommended

All necessary hardware is included. Factory roof rack required.

Fits 2021-2026 Ford Bronco (all trims). This RIGID Dual Pod A-Pillar mount kit provides a clean, secure platform for high-output LED lighting on your Bronco. Each bracket holds two RIGID 4-inch pods from the 360-Series, D-Series, or Radiance lines, giving you forward-facing auxiliary illumination without modifying factory bodywork.

Laser-cut from stainless steel and finished with a UV and abrasion-resistant powder coat, the mounts resist corrosion, fading, and trail abuse year after year. Hardware and installation instructions are included.

• Stainless steel construction
• UV and abrasion-resistant powder coat finish
• Accepts two 4-inch RIGID pods per side (360-Series, D-Series, Radiance)
• Engineered for 2021-2026 Ford Bronco (all trims)
• Professional installation recommended
• MPN: 46721

Fits select 2019-2025 Ram 2500 and Ram 3500 models. This A-pillar mounting bracket from Rigid Industries allows you to mount a 4-inch Rigid 360-Series, D-Series, or Radiance LED pod directly to your truck's A-pillar, giving you powerful auxiliary lighting in a tidy, low-profile package.

Constructed from stainless steel with a UV- and abrasion-resistant powder coat finish, this mount resists corrosion and fading even under harsh off-road use. The bracket is engineered to utilize factory mounting points, and Rigid recommends professional installation.

• Accepts Rigid 4-inch 360-Series, D-Series, or Radiance LED pods
• Stainless steel construction for long-term durability
• UV and abrasion resistant powder coat finish
• Designed specifically for 2019-2025 Ram 2500 and 3500 A-pillars
• Rigid Industries part number: 46719

Fits select 2019-2026 Ram 1500 models (Big Horn, Laramie, Limited, Rebel, TRX, and others). These Rigid Industries A-pillar mounts provide a secure, vehicle-specific foundation for auxiliary LED lighting on your truck.

Designed to position Rigid 4-inch pods at the A-pillar base, the brackets place light where you need it without obstructing the hood or windshield. Each mount is laser-cut from stainless steel and finished in a UV- and abrasion-resistant powder coat to withstand harsh weather, car washes, and trail debris.

• Direct bolt-on fit, uses factory mounting points (professional installation recommended).
• Compatible with Rigid Industries 360-Series, D-Series, and Radiance 4-inch LED pods (sold separately).
• Stainless steel construction with black powder coat finish for long-term corrosion resistance.
• Includes driver- and passenger-side brackets and all necessary hardware.
• Manufacturer part number: 46717.

Fits 2016-2020 Toyota Tacoma (all trims: Limited, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport).

This Rigid Industries A-Pillar mount kit positions your pod lights high and forward on the A-pillar for improved trail visibility without obstructing your view. The brackets are engineered to accept multiple Rigid light models, making it easy to choose the output and pattern that suit your driving.

Compatible Lights: 4" 360-Series, D-Series PRO, D-SS Pro, SR-M Pro, SR-Q Pro, Radiance Pods. (Lights sold separately.)

• Stainless steel construction – resists corrosion and flex
• UV and abrasion-resistant powder coat – stands up to sun, salt, and trail debris
• Made in the USA
• Direct bolt-on design – uses factory mounting points
• Professional installation recommended to ensure proper alignment and wiring

Part Number: 46702

Designed for a precise fit on the 2014-2020 Toyota Tundra, this Rigid Industries A-pillar mount (MPN 46701) securely anchors Rigid’s high-output LED light pods to the windshield pillars. It bolts to factory mounting locations for a clean, raised position that keeps lighting high and unobstructed.

• Stainless steel construction for strength and corrosion resistance
• UV- and abrasion-resistant black powder coat finish
• Compatible with multiple Rigid light series: 4-inch 360-Series, D-Series PRO, D-SS Pro, SR-M Pro, SR-Q Pro, and Radiance Pods
• Lights sold separately
• Professional installation recommended
• Made in the USA

Fits all 2014-2020 Toyota Tundra trims: 1794 Edition, Limited, Platinum, SR, SR5, and TRD Pro (2015-2017 and 2019-2020).

Fits all 2010-2020 Toyota 4Runner models. This Rigid Industries A-pillar mount kit provides a dedicated, secure mounting point for auxiliary LED lighting on your 4Runner. The brackets are engineered to hold a wide range of Rigid pod lights, allowing you to add forward-facing illumination while keeping the factory appearance clean.

• Compatible with Rigid 4-inch 360-Series, D-Series PRO, D-SS Pro, SR-M Pro, SR-Q Pro, and Radiance Pods
• Stainless steel construction with UV- and abrasion-resistant powder coat for long-term durability in harsh conditions
• Mounting hardware included
• Made in the USA

Professional installation recommended.

The Rigid Industries 3in Extended Dually D-Series Mount Bracket Kit (MPN 46537) offers a top-mount option for Rigid D-Series LED lights when standard bottom-mount brackets won't work. By flipping the bracket orientation, you can secure lights from above, ideal for tight or inverted mounting positions.

Made from stainless steel and finished with a UV- and abrasion-resistant black powder coat, these brackets withstand corrosion and fading. The 3-inch extended design provides extra clearance, and installation is simple using existing hardware (sold separately).

• Top-mount configuration for D-Series lights
• 3-inch extended length for added clearance
• Stainless steel construction
• UV- and abrasion-resistant powder coat finish
• Easy bolt-on installation

Fits select 2018-2026 Jeep Wrangler JL, including 2018-2022 Wrangler Unlimited models.

This Rigid Industries hood mount kit provides a clean, secure mounting solution for a 20-inch Adapt Smart LED light bar on your Jeep Wrangler JL. The brackets are precision laser-cut from stainless steel and finished in a durable black powder coat, offering corrosion resistance and a sleek, factory-integrated look. Installation uses the existing factory hood mounting bolts, simplifying the process while maintaining a strong, vibration-resistant hold.

• Laser-cut stainless steel construction
• Black powder coat finish for long-term durability
• Designed specifically for 20-inch Rigid Adapt series light bars
• Installs using factory hood mounting bolts
• Includes all necessary hardware
• Lights sold separately; professional installation recommended

Fits select 2017-2025 Can-Am Maverick UTVs, including X3, Sport, Trail, R, and 1000R models. This bracket kit provides a sturdy mounting point for a 10-inch Rigid Industries Revolve or SR-Series light bar directly at the front shock towers.

• Stainless steel construction resists corrosion and holds up in harsh off-road conditions
• Designed to bolt to the factory shock tower mounting points for a clean, secure install
• Compatible with 10-inch Rigid Revolve and SR-Series light bars (sold separately)
• Manufactured by Rigid Industries, part number 41649

Note: Light bar not included. Refer to manufacturer’s instructions for torque specs and installation details.