Pair these A-Pillar Dual Light Pod Mounts with our LBJL-10 Light Bar Mount (required) to attach (2) 3-inch light pods on each side of your hood cowl. This setup maximizes trail lighting without obstructing your view thanks to its sleek, low-profile design. Customize your lighting with options for single or dual pods, potentially mixing amber and clear lenses. You can aim one forward and the other to the side for versatile illumination. Finished in a durable micro-texture black powder coat for protection and style. *** PLEASE NOTE - This can ONLY be installed with our LBJL-10 Light Bar Mount. It can NOT be used without the light bar mount.

• *** Works exclusively with LBJL-10 (This cannot be installed without installing LBJL-10)
• Provides mounting options for (4) 3" pod lights.
• Sleek low profile design.
• Quick and easy install.

This Part Fits:

These pod light brackets install directly to factory mounting locations on the cowl/a-pillar of your Jeep Mojave or 392. Up to two 3-inch LED pod lights can be installed on each side, providing ample lighting on the trail in low-light conditions. The brackets are constructed with 4mm steel, and finished in a micro-texture black powder coat. These are the perfect choice for those who want sleek, low-profile dual pod light mounts.

• EACH BRACKET CAN MOUNT UP TO TWO 3-INCH POD LIGHTS
• MICRO-TEXTURE BLACK POWDER COAT FINISH
• NO DRILLING INSTALLATION
• HARDWARE IS INCLUDED
• LOW PROFILE FITMENT
• SOLD AS A PAIR

This Part Fits:

These light mount brackets install direct to factory mounting locations on the cowl of your Jeep maintaining a low-profile position. Up to two 3-inch LED pod lights can be installed on each side, providing additional lighting on the trail in low-light conditions. The brackets are constructed with 3mm steel, and finished in a micro-texture black powder coat.

• EACH BRACKET CAN MOUNT TWO 3-INCH POD LIGHTS
• MICRO-TEXTURE BLACK POWDER COAT FINISH
• NO DRILLING INSTALLATION

This Part Fits:

Our A-Pillar Dual Light Pod Drop Mounts provides options to mount (2) 3-inch light pods on each side of the vehicle. The top light mounting point is perfect for forward-facing or angled lighting. The drop mounting point is great for either forward-facing or side ditch lighting - perfect for dark trail conditions. The brackets sit in a low-profile position to keep the pod lights out of your sightline. Each side has provisions for mounting an antenna or whip flag.

• Drop down design to offer side scene lighting without hood glare.
• Utilizes factory accessory mounting and hardware
• Come with (2) optional antenna/whip mounts.
• Mount up to (2) 3 light per side.
• Micro-Texture Black Powder Coat
• Low profile design.

This Part Fits:

DV8 Offroad has designed a tubular bull bar for the Bronco's factory steel bumper that sits much lower in front of the grille than the OEM version, giving it a low profile appearance. The tube features 2 adjustable light mounts that allow for LED lighting to be mounted above or below the bar. Lighting options include mounting up to a 20-inch light bar above or below the tube, or a pod/round light on each of the 2 tabs. The mounting plates are constructed of 3mm steel, and the bar is made from 1.5-inch diameter x 1.5mm thick steel tubing. Installation is a simple half-hour process that utilizes the 8 factory bolts already present on the Bronco's steel bumper.

• 2 ADJUSTABLE LIGHT MOUNTS FOR 20 inch LIGHT BAR OR POD/ROUND LIGHTS
• 2 Adjustable Light Mounts For 20 Light Bar Or Pod/Round Lights
• MICRO-TEXTURE BLACK POWDER COAT
• BOLT-ON INSTALLATION
• LOW PROFILE DESIGN

This Part Fits:

These light brackets were designed to enable you to cleanly mount dual, 3-inch pod lights in each of the fog pockets on the factory Bronco steel front bumper. They can be used for additional trail lighting or as fog lighting. The pod light brackets install easily with the provided hardware, and efficiently utilize empty space as an opportunity for supplemental lighting.

• FITS (2) 3 inch LED POD LIGHTS ON EACH SIDE OF BUMPER
• Fits (2) 3 Led Pod Lights On Each Side Of Bumper
• MICRO-TEXTURE BLACK POWDER COAT
• SOLD AS A PAIR

This Part Fits:

This light bracket was designed to mount a 40-inch curved LED light bar? above your 2021+ Ford Bronco windshield. Alternatively, you can mount up to 12 LED pod lights. This is the perfect way to provide the trail lighting you need when driving off-road in low-light conditions. The bracket is constructed with a combination of 3/4" diameter tube steel and 4mm thick plate steel and finished in our micro-texture black powder coat. No modifications are required for install, as this mounts directly to the OEM accessory mounts located above the windshield.

• CONSTRUCED FROM 3/4" DIAMETER TUBE STEEL AND 4MM PLATED STEEL
• Constructed From Diameter Tube Steel And 4mm Plate Steel
• Fits Most 40 Curved Led Light Bars Or (12) 3 Pod Lights
• Includes Mounting Brackets for Light Bars
• INSTALLS TO OEM ACCESSORY MOUNTS
• Micor Texture Black Powder Coat
• FITS (12) 3 inch POD LIGHTS
• HARDWARE INCLUDED

This Part Fits:

Our Bronco A-Pillar Pod Light Mounts were designed to match the MIC (molded-in-color) trim pieces found on all models. Up to (2) 3-inch LED pod lights can be mounted on each side. Alternatively, a single larger pod light can be mounted on each side. We tested pod lights up to 6-inches in diameter. These can be used for forward facing lighting or as ditch lights. Because we gave them 3 mounting holes each, you can even fit (3) 2-inch pod lights if that's more your style.?The brackets are constructed from 3mm steel and finished in a micro-texture black powder coat to protect against rust.

• UP TO (2) 3" POD LIGHTS, (3) 2" POD LIGHTS, OR A SINGLE 4"-6" POD LIGHT PER MOUNT?
• Up To (2) 3 Pod Lights, (3) 2 Pod Lights, Or A Single 4-6 Pod Light Per Mount
• 3 AVAILABLE LIGHT MOUNTING LOCATIONS PER MOUNT?
• 3 Available Light Mounting Locations Per Mount
• UTILIZES FACTORY HARDWARE FOR INSTALLATION?
• Utilizes Factory Hardware For Installation
• MATCHES OEM TRIM STYLE & APPEARANCE?
• Matches OEM Trim Style & Appearance
• MICRO-TEXTURE BLACK POWDER COAT?
• Micro-Texture Black Powder Coat
• RETAINS USE OF FACTORY ANTENNA
• PAIR OF LIGHT MOUNTS?
• Pair Of Light Mounts

This Part Fits:

This crossbar was designed to provide your Bronco additional mounting options for rear facing LED lights and speaker cans, or a speaker bar. The bar measures 29-inches in total length, and is 2-inches in diameter. There is a 10-inch slotted flat mount in the middle of the bar. 4 holes, 2 towards each end, allow you to run wiring hidden inside the bar. It is finished in a Micro-Texture Black Powder Coat, which blends well with the OEM trim. There are several possible configurations you can run. Two speaker cans with roll bar clamps can be installed, with up to a 6-inch light bar or two 3-inch pod lights on the flat mount. You can run a 20-inch light bar across the length of the bottom if utilizing the back rail mounts on the bar. Alternatively, a speaker bar up to 28-inches wide with roll bar clamps can be mounted across the bottom of the bar.

• DESIGNED FOR SPEAKER CANS OR A SPEAKER BAR WITH ROLL BAR CLAMP MOUNTS?
• Designed For Speaker Cans Or A Speaker Bar With Roll Bar Clamp Mounts
• 10" FLAT MOUNT FOR LIGHT BAR OR LIGHT PODS?
• 10 Flat Mount For Light Bar Or Light Pods
• 3MM PLATE STEEL & 2" X 1.5MM TUBE STEEL ?
• 3mm Plate Steel & 2 X 1.5mm Tube Steel
• MICRO-TEXTURE BLACK POWDER COAT?
• Micro-Texture Black Powder Coat
• 4 HIDDEN WIRING ACCESS POINTS?
• 4 Hidden Wiring Access Points
• INSTALLS TO OEM LOCATIONS?
• Installs To OEM Locations

This Part Fits:

The DV8 Elite Series slide brackets offers the ability to mount your light in just about any location. With our adjustable slide mounts, you can position the mounts almost the full width of the light as well as the angle. Our mounts include two brackets, rubber feet to prevent damage to painted or finished surfaces, and stainless hardware to last you through any type of weather.

• DESIGNED TO WORK WITH (BE52EW500W & BE13EW45W)

ADD Offroad's Light Hoop Add-On for the Ram TRX PRO Bolt-On Front Bumper enables you to add additional lighting on your bumper. Our hoop has 4 mounting locations for 6-inch round lights. As always, this has a fully bolt-on installation and is Made in America.

• Mounts For Four 6 in. Round Lights
• Hammer Black Powder Coat Finish

This Part Fits:

This add-on light hoop for the 2021+ Ford F-150 Raptor was designed to allow you to install four additional 6- in. LED round lights on your ADD Pro-Bolt On Front Bumper. The hoop is made from the same .120- in. steel wall tubing that the bumper it mounts on is made from. As always, this is fully bolt-on and Made in America.

• Mounts for four 6 inch round lights
• Mounts For Four 6 in. Round Lights
• Hammer Black Powder Coat Finish

This Part Fits: