Fits 2007-2018 Jeep Wrangler JK (including Unlimited) models, from X and Sport to Rubicon and special editions. The Rigid Industries Double A-Pillar Mount Kit securely positions up to two pairs of Rigid D-Series or Radiance LED pod lights (sold separately) on your Wrangler's A-pillars for enhanced forward visibility.

Built from stainless steel and finished with a UV- and abrasion-resistant powder coat, this bracket kit is engineered to withstand years of off-road use. Aggressive Rigid styling matches the rugged looks of the JK platform.

• Holds two pairs of D-Series, Dually, or Radiance pod lights (sold separately)
• Stainless steel construction
• UV and abrasion resistant powder coat finish
• Aggressive styling blends with factory lines
• Includes mounting hardware and installation instructions
• MPN: 40335

The Rigid Industries 3 Amp LED Flasher (MPN 40312) adds seven selectable flash patterns to your LED lighting setup. Just connect it inline with your existing auxiliary switch and 12V power—no complex programming required.

• Seven flash modes: Single Simultaneous, Double Simultaneous, Quad Simultaneous, Alternating, Alternating Variable Speed, Simultaneous Variable Speed, Random cycle
• 3 Amp total capacity
• Two output channels
• 12V DC electrical systems only
• Compact inline module with straightforward wiring

Designed for Rigid Industries E-Series, RDS-Series, and Radiance LED light bars, both curved and straight.

This three-piece resonance damper set slides between the heat sink fins of your LED light bar to absorb harmonic distortion and reduce mechanical vibrations. At highway speeds, airflow across the extruded fins can create a whistling noise; these dampers minimize that wind noise by disrupting the resonant frequency.

• Slides securely between heat sink fins without tools
• Reduces amplitude of mechanical vibrations and wind noise
• Absorbs harmonic distortion from airflow over fin fluting
• Compatible with curved and straight light bar profiles
• Three dampers per set for multiple mounting positions

Fits 10-50 inch Rigid Radiance and 10-54 inch Radiance Curved LED light bars. The Rigid Radiance 3-Wire Multi-Trigger Harness simplifies wiring for your Radiance light bar with two independently switched circuits. Circuit one uses a relay to handle the higher current draw of the primary LEDs, while circuit two runs without a relay for the low-amp backlighting circuit. The harness includes a red and a blue backlit LED rocker switch so you can control each circuit independently.

• Integrated fuse holder protects both circuits
• Includes two backlit LED rocker switches (1 red, 1 blue)
• Two independent circuits: high-amp with relay, low-amp without relay
• Designed and engineered by Rigid for Radiance light bars
• MPN 40200

This 14-foot (4.3-meter) wiring harness connects a pair of Rigid D-Series PRO or SR-Q Series PRO LED lights to your 12V electrical system. It's pre-terminated with battery terminals on one end and weather-sealed Deutsch connectors on the light side, so you can power a matched pair without cutting or splicing.

• Length: 14 ft / 4.3 m
• Includes inline fuse holder and waterproof switch
• Deutsch connectors ensure a secure, weather-resistant connection
• Compatible with Rigid D-Series PRO (pair) and SR-Q Series PRO (pair) Spot, Flood, and Flood Diffused optics
• Designed and engineered by Rigid Industries
• Manufacturer part number: 40195

Connect a single RIGID LED light to your 12V electrical system with this 11-foot (3.35m) wiring harness. One end terminates in battery terminals for a direct connection to the vehicle battery, while the other end features a weather-resistant Deutsch connector that plugs securely into the light. An inline fuse holder protects the circuit, and the included waterproof switch allows convenient control.

Compatible RIGID LED lights:

• D-Series (single)
• 4 in. E-Series
• 6 in. E-Series PRO
• 6 in. SR-Series
• 10 in. SR-Series
• Q-Series (single)
• D-XL Series (single)
• SR-M Series (single)
• SR-Q Series (single)

Designed and engineered by Rigid Industries. Part number 40194.

This 11-foot (3.35-meter) wiring harness provides a straightforward way to connect a single RIGID LED light bar to your vehicle's 12V electrical system. Pre-terminated with battery ring terminals on the power side and a Deutsch connector on the light side, it includes an inline fuse holder, 12V relay, and a waterproof switch for in-cab control. Compatible with RIGID SR-Series PRO light bars (20–50 in.) and E-Series PRO light bars (10–30 in.). Designed and engineered by RIGID.

• Length: 11 ft / 3.35 m
• Connections: Deutsch connector (light side) and battery ring terminals (power side)
• Includes inline fuse, 12V relay, and waterproof switch
• Designed for single light bar installations
• Manufacturer part number: 40193

This Rigid Industries wiring harness (MPN 40192) provides a 33-foot (10-meter) reach for installing SR-M or SR-Q Series backup light kits. The integrated three-position switch allows you to toggle between On, Off, or Auto—automatically activating the lights when the vehicle is shifted into reverse.

Designed and engineered by Rigid, the harness simplifies wiring with factory-style connectors and ample length for most truck, SUV, or utility vehicle installations.

• Length: 33 ft / 10 m
• Switch: 3-position (On/Off/Auto in reverse)
• Compatibility: Rigid Industries SR-M and SR-Q Series backup light kits
• Includes 3-position switch and wiring harness

Upgrade your RIGID lighting system with the Rigid Industries Lighted Rocker Switch (MPN 40191). Designed to integrate seamlessly with any RIGID wiring harness, this switch provides reliable, at-a-glance control with a clear LED on/off indicator. A protective rubber boot seals out moisture and debris, delivering IP56-rated water and dust resistance for use in open vehicles, boats, or harsh environments.

Installation requires a 3/4-inch mounting hole, and the switch bolts into place for a secure, factory-like fit. The illuminated rocker is easy to locate in low light, while the robust construction stands up to vibration and weather.

• LED on/off indicator light
• IP56 water and dust resistant
• Protective rubber boot included
• Fits all RIGID wiring harnesses
• Mounting hole diameter: 3/4 inch
• Manufacturer part number: 40191

This 13-foot (4-meter) wiring harness connects a single Rigid Industries LED light bar to your 12V electrical system. It's built specifically for following Rigid models: 40–50 inch E-Series PRO and 20–54 inch RDS-Series PRO. Designed and engineered by Rigid for a clean, reliable install.

• 13 ft (4 m) harness length
• Battery terminals on one end, Deutsch connector on the light side
• Inline ATO/ATC fuse holder (fuse included)
• Integrated 12V relay with mounting bracket
• Weatherproof rocker switch with illuminated indicator
• Manufacturer part number: 40190

Mount your Rigid D-Series, Radiance Pod, Radiance Scene, or 2x2 Scene LED light pod securely with this stainless steel L-bracket kit. Designed for custom installations, the bracket arrives uncoated so you can paint or powder coat it to match your vehicle’s color scheme.

Key Features:

• Fits Rigid D-Series, Radiance Pod, Radiance Scene, and 2x2 Scene LED lights
• L-bracket design for versatile mounting
• Stainless steel construction for corrosion resistance
• No powder coat — bare finish for custom color matching
• Includes stainless steel mounting hardware
• Rigid Industries part number: 40185

Fits Rigid Industries SR-Series and RDS SR-Series LED light bars.

This L-bracket mounting kit is crafted from stainless steel and coated with a UV- and scratch-resistant powder coat finish. It delivers a tough, corrosion-resistant mounting solution that holds up under harsh conditions.

• Stainless steel construction
• UV- and scratch-resistant powder coat
• Compatible with SR-Series and RDS SR-Series LED light bars

Manufacturer part number: 40183

Secure your Rigid Industries LED light bar with this stainless steel L bracket kit. Designed to fit E-Series, Adapt E-Series, 2x10 Scene, and Radiance light bars, the kit provides a sturdy, custom mounting solution for off-road or work applications. The brackets are fabricated from durable stainless steel and finished with a scratch- and UV-resistant powder coat to withstand harsh conditions.

• Fits Rigid E-Series, Adapt E-Series, 2x10 Scene, and Radiance LED light bars
• Constructed from durable stainless steel
• UV-resistant powder coat finish resists fading and corrosion
• Scratch-resistant coating maintains appearance
• L-bracket design allows flexible mounting angles

The Rigid Industries 3-Position Cherry Rocket Switch (MPN: 40181) provides manual on/off control plus an auto mode that can be wired to activate your lights when the vehicle is shifted into reverse. The lighted cherry rocker includes an LED indicator for at-a-glance status, and a protective rubber boot helps seal out dirt and moisture.

• Three modes: On, Off, Auto (reverse-triggered)
• Illuminated cherry rocker with LED on/off indicator
• Protective rubber boot
• Requires a 3/4" mounting hole
• Part number: 40181

The Rigid Industries Pendant Switch Kit (40052) is a no-drill remote toggle solution for powersports and off-road vehicles. Rather than cutting into your dashboard, this switch mounts to a roll bar or tube using the included radius pad and industrial-grade 3M VHB adhesive tape, giving you a clean, professional installation that preserves your vehicle’s interior. The illuminated LED indicator provides a clear at-a-glance on/off status, while the sealed, impact-resistant design stands up to mud, water, dust, and vibration.

• LED on/off indicator light
• Water and dust resistant construction
• Impact resistant housing
• Ultra-durable for harsh environments
• Includes pendant switch, 3M VHB mounting tape, and radius mount pad for bar mounting

Designed to throw durable, focused light underneath your truck, Jeep, or side-by-side, the Rigid Industries Rock Light Kit (6-light configuration, amber output) uses the proven A-Series LED pod in a purpose-built undercarriage lighting package. Each light comes with a 15-foot lead, angled mount, and all necessary hardware, letting you position the pods to illuminate obstacles, trails, or worksites after dark.

Rigid built the kit to survive the elements and the trail. Key construction and protection details:

• SAE J575 compliant for shock and vibration
• IP69K rating—dust-tight and protected against high-pressure water ingress
• Impact-resistant polycarbonate lens
• Durable UV-resistant powder coat on high-grade aluminum alloy housing
• Integrated thermal management system
• Over/under voltage and reverse polarity protection
• 10–28 V DC operating range, RFI/EMI protection
• RoHS compliant, 50,000+ hour LED lifespan
• Mount adaptors included
• What’s included: six amber A-Series LED pods with 15-ft leads, six angled mounts, wiring harness, switch, hardware

Whether you’re rock crawling at night, lighting up a campsite, or just adding functional style, this amber kit cuts through dust and enhances contrast without the harsh glare of white light.

Rigid Industries' 6-light Rock Light Kit delivers durable illumination for the undercarriage of trucks, Jeeps, and all-terrain vehicles. Built on the proven A-Series LED platform, each blue light features a custom 15-foot lead, giving you the flexibility to position lights strategically around the vehicle. The kit includes an in-cab switch and angled mounting brackets, enabling a clean installation with broad coverage for night rock crawling and trail runs.

Constructed from high-grade aluminum alloy with a UV-resistant powder coat finish and impact-resistant polycarbonate lens, these lights are engineered to withstand harsh off-road environments. Integrated thermal management and comprehensive circuit protection ensure reliable operation across a 10–28V DC range.

• SAE J575 compliant for shock and vibration resistance
• IP69K rated against dust and high-pressure water ingress
• Impact-resistant polycarbonate lens
• Durable UV-resistant powder coat finish
• High-grade aluminum alloy housing
• Integrated thermal management system
• Over/under voltage protection
• Reverse polarity protection
• RFI/EMI protection
• RoHS compliant
• 50,000+ hour LED lifespan
• Operates on 10–28V DC
• Includes 15-foot leads, in-cab switch, and angled mounting adaptors

Rigid Industries red 6-light rock light kit provides powerful under-vehicle illumination for off-road use. Each A-Series LED light features a durable aluminum housing and impact-resistant polycarbonate lens, with 15-foot leads for flexible mounting. The kit includes six lights, adjustable angle mounts, and a switch, allowing you to light up the trail with intense red light that preserves night vision or accents your vehicle's color scheme.

Key features:

• SAE J575 compliant for shock and vibration resistance
• IP69K rated for dust and water ingress protection
• Integrated thermal management system
• UV-resistant polyester powder coat finish
• Over/under voltage and reverse polarity protection
• 10-28 V DC operating range
• High-grade aluminum alloy construction
• RFI/EMI protection
• RoHS compliant
• 50,000+ hour LED lifespan
• Mount adapters included

This kit is designed for trucks, Jeeps, and all-terrain vehicles, perfect for night rock crawling and trail riding.

Designed to light up the undercarriage of any truck, Jeep, or all-terrain vehicle, the Rigid Industries Rock Light Kit provides powerful, durable illumination for night off-roading. This 6-light Cool White set uses A-Series LED technology with custom 15-foot leads on each light, a master switch, and angled mounts to strategically place lights under the chassis. Whether you're navigating technical rock crawling trails or accenting your vehicle’s build, these lights deliver reliable, long-lasting performance.

• SAE J575 compliant — shock/vibration tested
• IP69K dust/water ingress protection
• Impact-resistant polycarbonate lens
• Durable UV-resistant powder coat finish
• High-grade aluminum alloy housing
• Integrated thermal management system
• Over/under voltage and reverse polarity protection
• RFI/EMI protection and RoHS compliant
• 50,000+ hour LED lifespan
• 10-28V DC input range
• Includes six lights, 15-foot leads, switch, angled mounts, and mounting adaptors

Fits universal off-road and rock crawling vehicles, including trucks, Jeeps, and all-terrain vehicles. This 4-light amber LED rock light kit from Rigid Industries delivers durable, high-output illumination for night trail rides and rock crawling. Each light uses A-Series LED technology with custom 15-foot leads, a switch, and angled mounts to illuminate the undercarriage or wheel wells. The amber output aids night vision and complements vehicle accents. The kit is designed to mount strategically at multiple points on the vehicle for 360-degree trail lighting.

Engineered for extreme conditions, the lights feature an impact-resistant polycarbonate lens, UV-resistant powder-coated high-grade aluminum alloy housing, and an integrated thermal management system. Electronics include over/under voltage, reverse polarity, and RFI/EMI protection, ensuring reliable operation across a 10-28V DC range. The kit meets SAE J575 shock/vibration standards and carries an IP69K dust/water ingress rating, making these lights fully submersible and pressure-wash safe.

• Amber output enhances trail visibility and night vision
• 4 A-Series LED rock lights with 15-foot leads per light
• Includes switch and angled mounts for versatile placement
• IP69K rated — dust-tight and protected against high-pressure/steam cleaning
• SAE J575 compliant for shock and vibration resistance
• Impact-resistant polycarbonate lens
• UV-resistant powder coat over high-grade aluminum alloy housing
• Integrated thermal management system prevents overheating
• Over/under voltage and reverse polarity protection
• 10-28V DC operating range
• RFI/EMI protection for interference-free operation
• RoHS compliant
• 50,000+ hour LED lifespan
• Mount adaptors included

What's Included: (4) Amber LED rock lights with 15-foot leads, switch, angled mounts, installation hardware.

The RIGID Rock Light Kit harnesses the proven durability of A-Series LED technology to deliver intense undercarriage illumination for trucks, Jeeps, and all-terrain vehicles. Each of the four blue LED pods comes pre-wired with a 15-foot lead, an angled mounting bracket, and a remote switch—everything needed to bolt the lights to the frame or body and light the trail directly beneath the vehicle. Whether you’re picking a line at night or accenting your rig, the kit provides targeted, reliable light exactly where you need it.

Highlights:

• Four blue A-Series LED pods with 15-foot leads
• Angled brackets for easy aiming and installation
• Includes switch and all mounting hardware
• Impact-resistant polycarbonate lens
• Durable UV-resistant powder coat finish
• High-grade aluminum alloy housing
• Integrated thermal management system
• IP69K rated—dust-tight and protected against high-pressure water
• SAE J575 compliant for shock and vibration
• Over/under voltage and reverse polarity protection
• RFI/EMI protection
• RoHS compliant
• Operating range: 10–28 V DC
• 50,000+ hour LED lifespan

Own The Night with the original LED rock light kit, engineered to handle everything from rock crawling to mud-splattered trails without flickering or failure.

The Rigid Industries Rock Light Kit (Red, 4-Light) delivers rugged undercarriage lighting for off-road vehicles. Each compact pod uses A-Series LED technology with red output, ideal for preserving night vision or accenting vehicle color. The kit includes four lights with custom 15-foot leads, angled mounts, and a switch for flexible installation on trucks, Jeeps, and all-terrain vehicles.

Engineered for harsh trail conditions, every light features a high-impact polycarbonate lens, a high-grade aluminum alloy housing with UV-resistant powder coat, and integrated thermal management. The electronics are protected against reverse polarity, over/under voltage, and RFI/EMI interference.

• SAE J575 compliant – shock and vibration resistant
• IP69K ingress protection – sealed against dust and high-pressure water
• Impact-resistant polycarbonate lens
• UV-resistant powder coat finish
• Over/under voltage protection
• Reverse polarity protection
• RFI/EMI protection
• Integrated thermal management system
• High-grade aluminum alloy construction
• 50,000+ hour LED lifespan
• 10-28 V DC operating range
• RoHS compliant
• Includes angled mount adaptors, 15-foot leads, and switch

The Rigid Industries A-Series Rock Light Kit delivers powerful undercarriage illumination for trucks, Jeeps, and all-terrain vehicles. Each of the four cool white LED lights features a custom 15-foot lead, giving you the flexibility to mount lights exactly where you need them. The included switch and angled mounts make it easy to set up strategic lighting for night rock crawling, trail runs, or accenting your vehicle's stance.

Built to withstand harsh environments, the kit's A-Series lights carry an IP69K rating for dust and water ingress, an impact-resistant polycarbonate lens, and a durable UV-resistant powder coat on the high-grade aluminum alloy housing. Integrated thermal management, over/under voltage protection, and reverse polarity protection ensure reliable operation from 10 to 28 V DC. With a 50,000+ hour lifespan, this kit is engineered to own the night for years.

• Cool white (4-light) configuration
• IP69K compliant – Dust/Water ingress protection
• SAE J575 compliant – Shock/Vibration tested
• Integrated Thermal Management System
• Impact resistant polycarbonate lens
• Durable UV resistant powder coat finish
• High-grade aluminum alloy construction
• Over/Under voltage protection
• Reverse polarity protection
• RFI/EMI protection
• RoHS compliant
• 50,000+ hour lifespan
• 10-28 V DC operating range
• Includes mount adaptors, switch, and 15-foot leads

Upgrade the fog lights on your 2022-2026 Toyota Tundra with this complete kit from Rigid Industries. The SR-Series 6-inch SAE White Fog Light Kit replaces the factory fog lights with high-output LED units that deliver street-legal illumination in rain, fog, and snow. The kit bolts into the OEM fog light pockets and includes everything you need for a straightforward install.

• Fits all 2022-2026 Toyota Tundra trims: 1794 Edition, Capstone, Limited, Platinum, SR, SR5, TRD Pro
• Two 6-inch SR-Series SAE White LED fog lights
• SAE-compliant beam pattern—legal for on-road use in low-visibility conditions
• H11 plug-n-play adapters integrate with the stock wiring harness—no cutting or splicing
• Mounting hardware included; utilizes factory mounting points
• Installs in OEM fog light location for a clean, integrated look

What's in the box: (2) SR-Series 6" SAE White Fog Lights, (2) H11 adapters, mounting hardware, installation instructions.

Manufacturer Part Number: 37202.

Fits 2022-2026 Toyota Tundra (all trims). The Rigid Industries SR-Series Selective Yellow Fog Light Kit is a direct replacement for the factory fog lights, delivering improved visibility in rain, fog, and dust. Each kit includes two 6-inch LED pods tuned to a selective yellow output that cuts through low-visibility conditions without causing glare for oncoming traffic. The lights are SAE-compliant for on-road use and mount in the OEM fog light locations using included hardware. Plug-and-play H11 adapters connect seamlessly to the stock wiring harness—no cutting or splicing required.

• Selective yellow LED output for enhanced contrast in poor weather
• SAE-compliant fog light beam pattern (street legal)
• Includes two 6-inch SR-Series LED pods, H11 adapters, and mounting hardware
• Direct fit in factory fog lamp openings; no modifications needed
• Manufacturer part number: 37201

This Rigid Industries fog light kit replaces your vehicle's factory fog lamps with high-output LED lighting, engineered to fit select 2014-2026 Toyota Tundra, 4Runner, and Tacoma models. Each kit includes two 4-inch 360-Series PRO SAE Selective Yellow fog lights, two OEM-style adjustable bracket assemblies, and a vehicle-specific plug kit for straightforward, aim-and-mount installation using existing hardware.

• IP68 compliant — sealed against dust and water ingress
• UV-resistant black powder coat finish
• Injection-molded polycarbonate lens
• Uses factory mounting hardware for seamless OEM fitment
• Pressure-equalizing vent prevents internal condensation
• 50,000-hour LED lifespan
• SAE J583 compliant for street-legal fog lamp performance
• Fully adjustable beam aiming
• Patented Rigid optics for focused, wide-fill beam pattern
• Includes all necessary mounting hardware and plug-n-play wiring

Note: 360-Series light covers do not fit this fog light kit.

This RIGID Fog Light kit is designed for the 2014+ Toyota Tundra, 2014+ 4Runner, and 2016+ Tacoma and allows for a clean install of RIGID's high output LED lighting in your vehicle's OEM fog lamp location. This fog light kit comes with two OEM Fog Bracket Assemblies, two 4 Inch 360-Series PRO SAE White Fog Lights, and a plug kit. The OE fog mount kits are adjustable for proper light aiming, uses OEM mounting Hardware, and offer a seamless fitment.

• 360-Series Light Covers Do Not Fit This Fog Light Kit
• IP68 Compliant - Dust/Water Ingress
• Includes All Necessary Hardware
• UV Resistant Black Powder Coat
• Injection Molded Polycarbonate
• Uses OEM Mounting Hardware
• Pressure Equalizing Vent
• 50000 Hour LED Lifespan
• Seamless OEM Fitment
• SAE J583 Compliant
• Fully Adjustable
• Patented Optics

This Part Fits:

The Rigid Industries 360-Series 9-inch round LED off-road light delivers a focused spot beam with the added versatility of an integrated RGBW backlight. Its high-grade aluminum alloy housing and heatsink, combined with a black exposed circuit board and patented forward-projecting optics, produce up to 8,600 raw lumens. The independently controlled backlight offers eight selectable colors—red, green, blue, light blue, purple, amber, white, and demo mode—via a dedicated wire, allowing it to run independently of the primary LEDs. Designed for demanding off-road use, the light operates on 9–36 VDC and features a pressure-equalizing vent rated for 50,000 hours of LED life.

Key Features:

• Spot beam pattern for long-range illumination
• RGBW backlight with 8 selectable color options
• Up to 8,600 raw lumens output
• High-strength aluminum alloy housing and heatsink
• Black exposed printed circuit board
• Patented forward-projecting optics
• 9–36 VDC compatibility
• Pressure-equalizing vent
• 50,000-hour LED lifespan

Note: Wiring harness sold separately. Backed by a limited lifetime warranty. Off-road use only.

The Rigid Industries 360-Series 9-inch LED off-road drive beam light (part number 36421) delivers a powerful, long-range beam pattern with independent RGBW backlight control. It projects up to 8,600 raw lumens through patented optics, while the backlight offers eight colors—red, green, blue, light blue, purple, amber, white, and demo mode—via a dedicated circuit, without activating the primary LEDs.

• Up to 8,600 raw lumens with patented drive beam optics
• RGBW backlight: 8 colors + demo mode, independently controlled via dedicated wire
• High-grade aluminum alloy housing with integrated heatsink
• Black exposed printed circuit board
• Pressure equalizing vent prevents moisture intrusion
• 50,000-hour LED lifespan
• Wide 9-36 VDC operating range
• Off-road use only; wiring harness and switch sold separately
• Limited lifetime warranty

Installation instructions included. Wiring harness sold separately.

The Rigid Industries 360-Series 4-inch round LED spot beam lights (pair) produce a focused, long-range pattern ideal for off-road driving visibility. Each housing combines a high-grade aluminum alloy construction with optimized forward-projecting optics and a pressure-equalizing vent to resist moisture and condensation. An integrated RGBW backlight adds customizable styling, offering eight independently controlled color options via a dedicated circuit.

• Output: up to 8,600 raw lumens
• Beam pattern: Spot beam for maximum distance
• Backlight: RGBW with 8 color choices — red, green, blue, light blue, purple, amber, white, demo mode
• Independently controlled backlight with dedicated wire
• Housing: High-grade aluminum alloy with heat sink
• Optics: Patented reflector design for optimized forward projection
• PCB: Black exposed printed circuit board
• Vent: Pressure-equalizing vent
• Lifespan: 50,000-hour LED life
• Operating voltage: 9–36 VDC
• Installation: Flying leads for universal connection; off-road use only
• Warranty: Limited lifetime warranty

Package includes two 4-inch lights and installation instructions.