The RIGID SR-Series 10-inch light cover is a snap-on polycarbonate shield that protects your light bar lens from rock chips, trail debris, and road grime while giving it a distinct amber/yellow hue. The cover snaps directly onto the factory housing with no tools required, making it easy to install or remove whether you need compliance with local light-cover laws or just want to switch looks.

• Precision-molded polycarbonate construction
• Yellow tint acts as a lens filter for dust, fog, or high-contrast conditions
• Tool-free snap-on installation—no brackets or hardware needed
• Adds a protective layer without affecting beam pattern

Part #105963.

Defend your 10-inch Rigid SR-Series LED light against road grit, trail debris, and UV exposure with this black snap-on cover. Molded from impact-resistant polycarbonate, it clicks securely over the light’s lens, providing a clean, subdued appearance when the light is not in use—ideal for areas where accessory light covers are required.

• Durable polycarbonate plastic construction
• Tool-free snap-on, snap-off installation in seconds
• Black finish reduces glare and gives your light a stealthy look
• Adds an extra layer of impact and scratch protection
• Designed specifically for Rigid SR-Series 10-inch light bars
• Genuine Rigid Industries part: 105943

Rigid Industries light covers offer both protection and a distinctive look for your SR-Series LED lights. This snap-on cover is molded from durable polycarbonate plastic, providing an extra layer of defense against road debris, scratches, and UV exposure for the light's lens. The transparent Amber PRO tint helps improve visibility in dust, smoke, and other low-light conditions while giving your vehicle a unique front-end appearance.

• Fits Rigid SR-Series 10-inch LED lights with a 2-piece housing body only
• Transparent Amber PRO polycarbonate construction
• Snaps on and off without tools for quick changes
• Adds lens protection without permanently altering output color
• Perfect for areas requiring covers on accessory lights

This light cover fits Rigid Industries 6-inch SR-Series LED lights and combines style with practical protection. The Amber PRO tint helps cut through airborne particulates, enhancing visibility in challenging environments.

• Amber PRO color for improved contrast in dust, smoke, and fog
• Polycarbonate plastic shield guards the lens against impacts and debris
• Snaps on and off in seconds—no tools required
• Compliant with regulations requiring covered auxiliary lights

Part number: 105863

Simply snap the cover over your existing light to change both appearance and function.

This Rigid Industries light cover is designed to fit the 6-inch SR-Series LED light with a 2-piece housing body. Molded from tough polycarbonate plastic, it snaps securely over the lens to guard against stone chips, brush, and trail debris while adding an aggressive Amber PRO tint that improves visibility in dust, smoke, and fog. The cover is removable in seconds without tools, making it easy to switch to clear for street driving or to comply with local regulations requiring covered auxiliary lights.

• Transparent Amber PRO tint enhances contrast in low-visibility conditions
• Polycarbonate construction provides impact protection for the LED lens
• Snaps on and off in seconds — no hardware or tools needed
• Fits Rigid Industries SR-Series 6-inch lights with a 2-piece housing body only
• Helps meet requirements in areas where auxiliary light covers are mandatory

The Rigid Industries E-Series 4” Spot Light in Midnight Edition delivers a focused, long-range beam pattern with a distinctive blacked-out appearance. As part of the versatile E-Series lineup, this compact 4-inch round LED light is designed for auxiliary off-road lighting where targeted illumination is needed.

This Midnight Edition variant stands out with black oxide hardware and blacked-out internal circuit boards, giving it a refined, stealthy look. The spot beam optics project a concentrated cone of light, ideal for distance visibility, and the advanced LED technology ensures efficient, reliable output.

Whether mounted on a bumper, grille, or light bar, the E-Series 4” Spot Light provides robust construction and Rigid’s signature light quality.

• 4” round auxiliary LED light
• Spot beam pattern for long-range illumination
• Midnight Edition with blacked-out styling
• Black oxide hardware and dark circuit boards
• Part of the Rigid E-Series family
• MPN: 104213BLK

Rigid Industries' E-Series 4-inch flood light delivers a wide, even beam pattern perfect for trail riding, campsite setup, and work area illumination. As part of Rigid's most versatile lighting line, this compact light combines robust construction with advanced LED technology to provide dependable off-road visibility.

• Flood beam pattern illuminates a broad area with smooth, even light
• High-output LEDs for exceptional brightness and efficiency
• Blacked-out circuit boards for a refined, low-profile look
• Prominent Rigid branding integrated into the design
• Available in multiple beam patterns (this model: flood)
• Rigid part number: 104113

The Rigid Industries Q-Series Yellow Light Cover gives your Q-Series LED light a durable, protective shield with a custom yellow tint. Precision-molded from impact-resistant polycarbonate, it snaps directly onto the light housing in seconds—no tools required.

Whether you’re navigating dusty trails or daily driving, this cover helps prevent pitting and scratches from road debris, while the yellow color adds a unique look to your setup.

• Durable injection-molded polycarbonate construction
• Snap-on design installs without tools
• Yellow tint for a distinctive appearance
• Defends lens against rocks, dirt, and impact

Fits 2009-2014 Ford F-150 Lariat, XL, and XLT models without factory HID headlights.

Upgrade the lighting performance and front-end styling of your truck with Raxiom G4 Series Projector Headlights. These units are designed to replace factory reflector housings with modern projector technology, providing a more focused beam pattern for enhanced brightness and improved nighttime visibility. Each assembly features sleek black housings with clear lenses, integrating dual LED light bars and LED accent lighting for a contemporary, aggressive look.

Constructed to meet rigorous standards, these headlights are both DOT and SAE compliant for street-legal use. They are engineered as a direct replacement for 2009-2014 F-150 models originally equipped with halogen headlights; please note they are not compatible with models featuring factory HID systems.

• G4 Series projector technology for a focused beam
• Dual LED light bars and integrated LED accents
• Durable black housings with high-clarity lenses
• Enhanced visibility over OEM reflector units
• DOT and SAE compliant for safety and legality
• Manufacturer Part Number: T544003

Fits 2015-2020 Ford F-150 (Excluding Raptor) models including XL, XLT, Lariat, King Ranch, and Platinum.

Improve nighttime visibility and safety during inclement weather by upgrading your factory lighting with the Raxiom Axial Series LED Fog Light Kit. These direct-fit replacements feature high-output LED technology, producing a bright, clear beam that far outperforms original incandescent bulbs. Engineered for durability, these lights are constructed with die-cast aluminum housings and impact-resistant polycarbonate lenses, finished in a textured black powder coat for superior corrosion resistance and a rugged appearance.

Designed for a seamless integration, these fog lights are a true plug-and-play upgrade. They utilize the factory mounting points and connect directly to your F-150's original wiring harness without the need for cutting, splicing, or complex modifications. Installation can typically be completed in under an hour using standard hand tools.

• High-Performance Lighting: Super bright LED technology for enhanced peripheral illumination.
• Rugged Build: Die-cast aluminum housings with clear polycarbonate lenses.
• Weather Protection: IP67 waterproof rating for reliable performance in all conditions.
• Street Legal: DOT and SAE compliant to meet strict safety standards.
• Direct Fit: Includes both driver and passenger side lights (Pair).
• MPN: T541673

Fits select 2019-2025 Chevrolet Silverado 1500 and GMC Sierra 1500 models including Custom, Trail Boss, LT, SLT, and Denali trims.

Upgrade the exterior styling and visibility of your truck with Raxiom Axial Series LED Mirror Lights. These smoked-lens marker lights are engineered to replace the weak factory incandescent bulbs with high-output amber SMD LED strips. Featuring four distinct LED strips, these housings eliminate the unsightly central "hot spot" found in OEM lighting, providing a clean, uniform bar of light across the mirror housing.

Built for durability in harsh environments, these lights feature injection-molded ABS plastic housings that are fully weather-sealed to protect the internal circuitry from moisture, dust, and debris. The smoked lenses offer a stealthy look when the vehicle is off without compromising light output during the day or night. Installation is a straightforward plug-and-play process; these units snap directly into the factory mounting points and utilize the original wiring harness with no cutting, splicing, or resistors required.

• Manufacturer Part Number: S136548
• High-output amber SMD LED strip lighting
• Durable injection-molded ABS plastic housings
• Direct plug-and-play installation into factory mirror mounts
• Weather-sealed construction for long-term reliability
• Includes both driver and passenger side marker lights

Fits 2007-2018 Jeep Wrangler JK and JK Unlimited models.

Replace dated factory halogen lamps with the Raxiom Axial Series LED Projector Headlights (MPN J132813). These headlights utilize a projector lens design to produce a bright, focused beam pattern, significantly improving nighttime visibility and safety compared to OEM reflector housings. The integrated LED halo and accent lighting provide a modern look while increasing vehicle conspicuity during the day.

Constructed from OEM-grade materials, these headlights feature durable black plastic housings and impact-resistant, crystal-clear polycarbonate lenses. Each unit is weather-sealed to protect the internal electronics from moisture, dust, and trail debris. Installation is a direct bolt-on, plug-and-play process that requires no cutting or splicing; simply remove the front grille to access the factory mounting points.

• Direct-fit for 2007-2018 Jeep Wrangler JK/JKU
• LED projector beam for superior light distribution and cutoff
• Integrated LED halo and accent lighting for modern styling
• Durable black housing with clear polycarbonate lens
• Weather-sealed construction for environmental protection
• Simple plug-and-play installation; no modifications required
• Includes driver and passenger side assemblies
• Manufacturer Part Number: J132813

Fits select 2007-2025 Jeep Wrangler JK and JL models, including Rubicon, Sahara, Sport, 4xe, and Unlimited variants.

Raxiom Axial Series LED Fog Lights provide a significant visibility upgrade over factory incandescent lighting, utilizing high-intensity white LEDs to cut through dust, rain, and dark trails. These 4-inch round fog lights feature integrated dual-bar DRL (Daytime Running Light) accents, offering a modern aesthetic while improving vehicle presence during the day. Engineered for durability, the units feature rugged aluminum housings and toughened glass lenses, epoxy-sealed to earn an IP65 waterproof rating.

Installation is straightforward, as Raxiom includes wiring harness adapters for a direct plug-and-play fit on JK models. These lights are also compatible with JL models equipped with factory LED fog lights and many aftermarket bumpers. While the fog light function is plug-and-play for JK, the DRL accent bars require splicing into the side marker or running light circuit for power.

• High-intensity white LED output for improved peripheral visibility
• Integrated dual DRL accent bars for enhanced styling
• Impact-resistant toughened glass lenses
• IP65-rated waterproof and dustproof aluminum housing
• DOT and SAE compliant for street-legal use
• Estimated 50,000-hour LED lifespan
• Includes wiring harness adapters for JK installation
• Manufacturer Part Number: J130814

Fits 1997-2018 Jeep Wrangler TJ, JK, and JK Unlimited.

Raxiom Axial Series 7-inch LED Daymaker Headlights provide a significant visibility upgrade for both off-road trails and daily driving. These headlights utilize high-performance CREE LED lamps to produce between 3200 and 4500 raw lumens with a crisp 6000K color temperature. To ensure stable operation, each unit features a built-in EMC function that prevents flickering and electrical interference without the need for additional external decoders.

Built for the elements, these lights are housed in durable chrome-finished aluminum and carry an IP67 waterproof, shockproof, and dustproof rating. This design protects the internal electronics from moisture and debris during heavy rain or water crossings. The pair is designed for a straightforward plug-and-play installation, fitting directly into the factory 7-inch round mounting points without requiring cutting or wiring modifications.

• Raw Lumens: 3200-4500 lm
• Color Temperature: 6000K
• LED Type: High-Performance CREE
• Voltage: DC 9-30V
• Wattage: 45W
• Housing Material: Chrome Aluminum
• Lens: Durable Clear Lens
• Protection Rating: IP67 Waterproof, Shockproof, and Dustproof
• Installation: Plug-and-Play (approx. 1 hour)
• Included: Pair of Headlights and Anti-Flicker Boxes
• Manufacturer Part Number: J108043

Fits select 1997-2018 Jeep Wrangler TJ, JK, and Unlimited models originally equipped with factory halogen headlights.

Improve nighttime visibility and trail safety with the Raxiom Axial Series 7-Inch LED Daymaker Headlights. These high-performance units replace dim factory halogen lamps with 45-watt CREE LEDs, producing up to 4500 raw lumens in a crisp 6000K daylight white color temperature. Engineered for rugged environments, they feature durable black aluminum housings and clear lenses that are IP67-rated against water, dust, and vibration.

Each light includes a built-in EMC (Electromagnetic Compatibility) function to prevent flickering and electrical interference, eliminating the need for external decoders. The plug-and-play design ensures a straightforward installation into factory mounting points in approximately one hour without the need for cutting or wiring modifications.

• Manufacturer Part Number: J108042
• Light Output: 3200 - 4500 Raw Lumens
• Color Temperature: 6000K
• Power: 45 Watts; DC 9-30V
• Lifespan: 50,000+ Hours
• Protection Rating: IP67 Waterproof, Shockproof, and Dustproof
• Construction: Die-cast Aluminum Housing
• Fitment Note: Vehicles factory-equipped with LED headlights require factory halogen headlight buckets for installation (not included)

Fits all 1997-2018 Jeep Wrangler TJ, JK, and JK Unlimited models.

Replace dim factory halogen lamps with Raxiom Axial Series LED Headlights (MPN J108039) for superior nighttime visibility and a modern aesthetic. These 7-inch round headlights utilize high-intensity CREE LEDs to deliver a crisp 5600K white light. The specialized optics provide a longer beam distance and reduced glare compared to OE equipment, ensuring safer navigation on and off the trail. Each unit is housed in a rugged, die-cast black aluminum housing with a clear lens, engineered to withstand the vibrations and impacts common to off-road use.

Installation is a direct plug-and-play process utilizing factory mounting points and connectors, typically requiring only 30 minutes. Please note: These lights are intended for Jeeps originally equipped with factory halogen headlights. Models originally equipped with factory LED headlights will require factory halogen-style headlight buckets (not included) for installation.

• Dual-function high and low beam CREE LEDs
• 40 Watts of power output per headlight
• 5600K color temperature for clean, white illumination
• Durable black-finished aluminum housing with IP67 waterproof rating
• Rated for a lifespan of up to 15,000 hours
• Direct plug-and-play installation for halogen-equipped models

Fits select 1997-2018 Jeep Wrangler TJ and JK models originally equipped with factory halogen headlights.

Improve your nighttime visibility and off-road safety with the Raxiom Axial LED Halo Headlights. These 7-inch round units replace underperforming factory halogen lamps with high-output 6000K cool white LED technology. The integrated dual-function halo serves as both a crisp white Daytime Running Light (DRL) and a high-visibility amber turn signal indicator, modernizing your Jeep's front-end aesthetics.

Engineered for the trail, these headlights feature a rugged black housing protected by a high-impact clear polycarbonate lens. The internal electronics are epoxy-sealed to guard against moisture, dust, and vibration, ensuring a lifespan of up to 50,000 hours. This kit includes the H4 to H13 wiring adapters necessary for 2007-2018 JK models, though additional wiring is required for the halo functionality.

• Output: 5400 Lumens (High Beam) / 3600 Lumens (Low Beam)
• Color Temperature: 6000K Cool White
• Certifications: DOT and SAE compliant for street use
• Lifespan: Up to 50,000 hours
• Power: 60% lower consumption than standard halogen bulbs
• Hardware: Includes H4-H13 wiring harness adapters
• Manufacturer Part Number: J108037

Note: Models originally equipped with factory LED headlights require factory halogen-style headlight buckets for installation. Splicing into the vehicle's electrical system is required to activate the DRL and Amber Signal halo functions.

Fits 2015-2023 Dodge Challenger models including SXT, R/T, GT, Scat Pack, SRT Hellcat, Demon, and Super Stock.

Upgrade the rear safety and aesthetics of your vehicle with Raxiom Axial Series Smoked LED Rear Bumper Reflector Lamps. These units replace the passive factory-installed reflectors with high-intensity LED markers, providing a modern, aggressive look and significantly increased visibility for following drivers during night driving or inclement weather.

• High-Output Lighting: Features integrated red SMD LED strip lighting for bright, consistent illumination.
• Premium Materials: Constructed with injection-molded ABS plastic housings and smoked polycarbonate lenses for impact resistance and durability.
• Weather Sealed: Each housing is fully weather-sealed to protect the internal electronics from moisture, dust, and road debris.
• Direct Fit: Designed to fit the factory bumper mounting locations for a seamless look.
• Installation: Direct physical replacement for OEM reflectors; requires splicing into the factory tail light or parking light wiring harness for operation.
• Manufacturer Part Number: CH6725

Fits 2008-2014 Dodge Challenger models including SE, SXT, R/T, and SRT8.

Update your vehicle's rear aesthetics with Raxiom Smoked LED Tail Lights. These assemblies feature a modern, race track-inspired running light design and integrated sequential turn signals, providing a significant visual upgrade over factory units. Beyond the styling, the high-intensity diffused LEDs improve visibility for following drivers during braking and signaling maneuvers.

Engineered for long-term durability, these tail lights (MPN: CH3762) are constructed with rugged black ABS plastic housings and smoked polycarbonate lenses. Each assembly is weather-sealed to protect the internal electronics from moisture, dust, and road debris. These lights utilize red diffused LEDs for running, brake, and turn functions, while high-output white LEDs provide clear illumination for reverse signaling.

• Sequential turn signal indicators for a modern lighting signature
• Race track-inspired diffused LED running light design
• Durable smoked polycarbonate lenses and black ABS housings
• Weather-sealed construction protects internal components
• DOT and SAE compliant for street legality
• Direct plug-and-play installation into factory mounting points
• No cutting or wiring modifications required; ~45-minute install time
• Manufacturer Part Number: CH3762

Fits 2005-2009 Ford Mustang Base, Bullitt, GT, and Shelby (GT, GT500, GT500KR).

Update your S197 Mustang’s rear lighting with Raxiom Gen5 LED Tail Lights. These units replace the factory incandescent bulbs with high-intensity LED clusters that offer faster illumination and increased brightness for improved safety. Featuring an integrated sequential function, the turn signals and hazard lights pulse from the center outward. When the brakes are applied, the lights sequence once and remain solid to ensure clear signaling to following drivers.

Constructed with state-of-the-art electronic components, these tail lights feature a black housing and aggressively smoked lenses. The installation is a direct swap using a plug-in connector that mates to the factory wiring harness. These lights are DOT compliant under compliance number QR1200176, ensuring they meet federal safety standards for US-spec vehicles.

• Manufacturer Part Number: 49169
• Modern LED technology with built-in sequential turn signals
• Aggressive smoked lens with stealthy black housing
• Direct plug-and-play installation into factory harness
• DOT Compliant under QR1200176
• Sold as a set of two (driver and passenger side)
• Note: Not compatible with aftermarket tail light trim; fits US-spec models only without wiring modification

Fits select 1996-2004 Ford Mustang models, including Base, GT, Mach 1, and 1997 SVT Cobra (Excludes 1999-2001 Cobra).

Bring the iconic 1960s Shelby aesthetic to your SN95 or New Edge Mustang with the Raxiom Plug-In Sequential Tail Light Kit. This kit (MPN 49143) updates your rear lighting signature with a modern sequencing pattern while maintaining a classic muscle car look. When the turn signal or hazard lights are activated, the lights sequence from the center out. During braking, the segments sequence once and then remain fully illuminated for maximum safety and visibility.

Designed as a true plug-and-play solution, this kit replaces your factory wiring harness using OE-style connectors. Installation is straightforward and requires no cutting or splicing; simply reuse your factory incandescent brake and reverse bulbs in the new sockets. This kit is built using high-grade electronic components to ensure long-term reliability under varied driving conditions.

• Retro Sequencing Pattern: Triple-segment sequence from the center-out for signals and hazards.
• OE-Style Integration: Direct plug-in replacement for the factory tail light wiring harness.
• Reliable Performance: Assembled with state-of-the-art electronic components for consistent operation.
• Note: Not compatible with LED replacement bulbs or 1999-2001 SVT Cobra models equipped with amber turn signals.

Fits 2005-2009 Ford Mustang Base, Bullitt, and GT models (excludes GT500).

Update the front-end styling and lighting performance of your S197 with these Raxiom LED Halo Projector Headlights. Designed as a direct replacement for factory halogen units, these headlights feature a modern one-piece design with black housings and smoked lenses for an aggressive, custom look. The integrated projector lenses produce a focused, bright beam pattern for improved night visibility compared to standard reflector housings.

These headlights come equipped with high-efficiency LED halos and accent lighting, giving your Mustang a distinct exotic appearance. The set is fully DOT-compliant for street use and includes pre-installed bulbs for a straightforward installation process.

• Modern projector technology for a sharp, focused beam
• Signature LED halo and accent lighting
• Aggressive black housings with smoked lenses
• Low Beam: H7 bulb (included)
• High Beam: H1 bulb (included)
• DOT Compliant under compliance #QR1200197
• Sold as a pair (driver and passenger side)
• Manufacturer Part Number: 49128

Note: Not intended for use with vehicles equipped with factory Daytime Running Lights (DRL) or aftermarket HID kits. Does not fit GT500 models.

Fits all 2005-2009 Ford Mustang models, including Base, GT, Bullitt, and Shelby (GT, GT500, GT500KR).

Modernize the rear profile of your S197 with the Raxiom Coyote Tail Lights. Inspired by the 2010 redesign, these housings bring the iconic vertical-segment styling to the 2005-2009 chassis. Each light features dual vertical reverse segments: one provides high-visibility illumination when backing up, while the other serves as a precision-molded reflector to maintain safety and visual symmetry.

Engineered to exacting standards using OEM-grade materials, these tail lights are a direct-fit replacement for factory units. They utilize existing mounting points and hardware for a straightforward installation. These units are DOT-approved for street use and are compatible with aftermarket sequential kits for those seeking a classic Shelby-inspired signal pattern.

• Manufacturer Part Number: 49123
• DOT Compliance: Approved under QR1200112
• Housing Finish: Chrome
• Lens Color: Red/Clear
• Compatibility: Replaces factory 2005-2009 S197 tail light housings
• Quantity: Sold as a pair (Left and Right)

Fits 1994-1998 Ford Mustang Base, GT, GTS, SVT Cobra, and SVT Cobra R models.

Replace weathered or yellowed factory lenses with a clean, aggressive look. These Raxiom Axial Series Cobra Style Headlights feature a black housing and a crystal-clear lens to mimic the iconic SVT Cobra aesthetic while maintaining excellent light output. This four-piece kit is designed as a direct bolt-on replacement for the factory two-piece housing per side, ensuring a precise fit in the stock locations without modifications.

Built for street-legal performance, these headlights are DOT approved under compliance #QR1300003. They utilize dual-element 9007 bulbs for high and low beam functionality, providing a significant improvement in night visibility and safety compared to aged OE components.

• Manufacturer Part Number: 49050
• Classic four-piece design includes both main headlights and matching side markers
• Black housing with clear lens for a modern SVT Cobra style
• Equipped with dual-element 9007 bulbs for high/low beams
• DOT Approved under Compliance #QR1300003
• Installs directly into factory mounting points

Fits 2003-2004 Ford Mustang SVT Cobra and SVT Cobra 10th Anniversary models.

Restore your SVT Cobra to its original showroom condition with the Raxiom Axial Series OEM Style Replacement Third Brake Light. This unit is specifically engineered to replace scratched, cracked, or malfunctioning factory lamps with a modern LED upgrade that maintains the iconic styling of the 2003-2004 Terminator. Constructed from OEM-grade materials, the light features a durable black ABS plastic housing and a smoked red polycarbonate lens for a subtle, custom appearance.

The housing is fully weather-sealed to protect the internal LED electronics from dirt and moisture, ensuring long-term reliability. Designed as a direct plug-and-play replacement, this unit installs using factory mounting points and electrical connectors in approximately 20 minutes with basic hand tools.

• Direct plug-and-play installation
• Modern LED lighting for improved visibility
• Smoked red polycarbonate lens
• Durable black ABS plastic housing
• Weather-sealed against moisture and debris
• DOT and SAE compliant
• Manufacturer Part Number: 413424

Fits 2015-2023 Ford Mustang models including EcoBoost, GT, V6, Bullitt, Mach 1, and Shelby GT350/GT500.

Elevate the rear profile and visibility of your S550 with the Raxiom Axial Series Rear LED Side Marker Lights. These units replace the factory incandescent housings with a modern, high-intensity red LED strip that eliminates the dated "hot spot" look of standard bulbs for a sleek, continuous glow. Constructed with durable injection-molded ABS plastic and featuring clear lenses, these markers provide an exotic aesthetic while maintaining a precise factory-style fit.

Installation is a straightforward plug-and-play process. The housings are weather-sealed to protect the internal electronics from moisture and road debris. They connect directly to the factory wiring harness without the need for cutting, splicing, or adding resistors, allowing you to quickly upgrade your lighting with basic hand tools.

• High-output red LED strip for superior brightness and day/night visibility
• Durable injection-molded ABS plastic housings with clear lenses
• Weather-sealed design to protect against dirt and moisture intrusion
• Direct plug-and-play replacement for original factory lights
• Includes driver and passenger side rear markers
• Manufacturer Part Number: 404230

Fits 2005-2009 Ford Mustang Base, Bullitt, GT, Shelby GT, GT500, and GT500KR models.

The Raxiom Axial Series Smoked LED Third Brake Light (MPN 398337) provides a modern lighting upgrade for your S197 Mustang. This assembly features 16 high-output bright red LEDs housed behind a smoked lens to improve visibility and signaling compared to standard factory incandescent bulbs. The durable chromed plastic housing is weather-sealed to prevent moisture, dirt, and debris from damaging the internal electronics.

Engineered as a direct replacement for the original equipment, this third brake light features a simple plug-and-play installation. The included wiring harness adapter allows the unit to bolt to factory mounting points, typically completing the installation in under 15 minutes with no modifications required.

• 16 high-intensity bright red LEDs
• Smoked lens with durable chromed plastic housing
• Weather-sealed design to protect against moisture intrusion
• Direct plug-and-play replacement for OE factory light
• Includes wiring harness adapter for simple installation

Fits all 2010-2023 Ford Mustang models, including V6, GT, EcoBoost, and Shelby variants (US Spec only).

While 2010 and newer Mustangs come factory-equipped with sequential turn signals, that signature animation is typically disabled for other lighting functions. The Raxiom Plug-and-Play Tail Light Sequencer (MPN 301042) solves this by adding sequential patterns to your hazard lights, braking sequences, and remote lock/unlock signals. When the brakes are applied, the tail lights sequence once from the center out and remain solid; during hazard or turn signal use, the sequence repeats until the signal is deactivated.

Built using high-grade electronic components, this kit is designed for a simple, non-destructive installation. It features automotive-grade connectors that plug directly into the factory wiring harness, requiring no cutting, splicing, or specialized tools. This kit includes two inline harness units—one for the driver side and one for the passenger side—to completely replace the rear tail light sub-harnesses.

• Adds sequential animation to hazards, brakes, and lock/unlock functions
• Simple plug-and-play installation into factory mounting points
• Direct replacement for OE tail light wiring harnesses
• Maintains solid light output after initial brake sequence for safety
• Compatible with US-spec tail lights only
• Manufacturer Part Number: 301042

Note: This product is engineered for Mustangs sold in the US market. It is not compatible with EU or UK-spec Mustang wiring without significant modification.

Designed for universal fitment on 1999-2019 trucks, mini-trucks, and SUVs, this 60-inch Rampage LED Tailgate Lightbar provides increased visibility and a seamless look. This unit is engineered for long-term durability with a fully sealed electrical system, featuring a robotically assembled SMT (Surface Mount Technology) circuit board encased in a rigid, injection-molded cap and suspended in UV-stabilized clear urethane for total waterproofing.

• Six-Function Lighting: Provides high-intensity LED response for running lights, brake lights, turn signals, hazards, and reverse functions.
• Rugged Construction: UV-stabilized urethane encapsulation protects the high-intensity LED bulbs from moisture, vibration, and debris.
• Simple Installation: Mounts to the recessed space between the tailgate and bumper using included 3M automotive-grade adhesive foam tape; no drilling required.
• Plug-and-Play Wiring: Equipped with a heavy-gauge wiring harness and a flat four-pin hitch connector for quick integration with existing trailer wiring.
• Safety Features: Includes integrated fuse protection to safeguard the vehicle's electrical system.
• Manufacturer Part Number: 960136

Fits select 1980-2008 Buick, Chevrolet, Chrysler, Dodge, and Ford vehicles (see compatibility table). This kit is a direct upgrade for factory 7-inch round or 200mm rectangular sealed beam headlamps.

The Rampage H4 Headlight Conversion Kit replaces dated factory lighting with a high-performance halogen system. Utilizing an advanced multi-surface reflector (MSR) and a clear glass lens, these units produce a beam that is 60% more luminous than standard OEM sealed beams. The complex reflector geometry is engineered to provide a wider and longer beam pattern, significantly improving nighttime visibility and safety.

Each lamp is built with a durable die-cast aluminum housing that effectively dissipates heat, protecting the internal components and ensuring a longer service life. The kit includes replaceable 12V 55/60W H4 halogen bulbs that are fully street legal. For specialty off-road applications, the heavy-duty housings are designed to accommodate high-output bulbs up to 130 watts.

• Improved Visibility: Produces a 60% more luminous beam compared to conventional sealed beam units.
• Premium Construction: Die-cast aluminum reflector and housing with a clear glass lens for superior heat management.
• Universal Fitment: Designed to replace factory 7-inch round or 200mm rectangular lamps.
• Bulb Compatibility: Includes 12V 55/60W H4 bulbs; supports off-road bulbs up to 130W.
• Street Legal: SAE/DOT approved for street legal use in most factory harnesses.
• Installation: Compatible with most factory hardware and 50/60W wiring harnesses.
• Kit Contents: Sold as a pair (2 headlight units).
• Manufacturer Part Number: 5089927