Fits 2012-2016 Subaru Forester (X and 2.5i models).

RS-R Down Sus springs provide a refined lowering solution for the 2012-2016 Subaru Forester, offering a more aggressive stance without compromising daily drivability. These performance springs are engineered to lower the vehicle's center of gravity, effectively reducing body roll during cornering and improving overall handling response.

Designed as a direct replacement for factory springs, the Down Sus series is manufactured to strict tolerances to ensure a precise fit within the OEM suspension geometry. Whether you are looking to close the wheel gap or sharpen your vehicle's steering feel, these springs deliver a balanced combination of performance and comfort.

• Manufacturer Part Number: F901W
• Product Line: Down Sus
• Chassis Code: SJG / SJ
• Fitment: 2012-2016 Subaru Forester (All X and 2.5i Trims)
• Installation: Bolts to factory mounting points using original struts

Fits 2011-2012 Subaru Forester X and XT models including Limited, Premium, and Touring trims.

RS-R Down Sus springs provide a lowered stance and improved handling performance without sacrificing the daily ride comfort you expect from your Forester. These springs are engineered to lower the vehicle's center of gravity, effectively reducing body roll during cornering and providing a more planted feel on the road. Designed as a direct replacement for OE springs, they are compatible with factory struts and maintain proper suspension geometry.

• Manufacturer Part Number: F900W
• Precision-wound for durability and consistent spring rates
• Performance-tuned for a balance of aesthetics and ride quality
• Compatible with factory mounting points and hardware

Fits 2015-2017 Subaru Outback models (BS9 chassis) equipped with the 2.5L engine.

RS-R Down Sus springs provide a refined lowering solution that balances improved aesthetics with daily drivability. By lowering the center of gravity, these springs reduce body roll and improve cornering stability while maintaining a ride quality compatible with factory shock absorbers. Each spring is engineered to high tolerances to ensure long-term performance and a precise fit on the BS9 chassis.

• Product Series: Down Sus
• Vehicle Fitment: 2015-2017 Subaru Outback 2.5L (BS9)
• Handling Improvement: Lower center of gravity for reduced body roll
• Ride Quality: Designed to operate within factory strut damping ranges
• Manufacturer Part Number: F668W

Fits 2015+ Subaru Outback 3.6R models.

The RS-R Down Sus provides a lowered stance and improved handling while maintaining a refined ride quality suitable for daily driving. By lowering the center of gravity, these springs reduce body roll during cornering and provide a more aggressive profile by narrowing the wheel gap. Each spring is precision-tuned to work with factory dampening to ensure a balance between performance and comfort.

• Series: Down Sus
• MPN: F666W
• Construction: Precision-wound steel designed for durability and consistent spring rates
• Handling: Improved stability and reduced body roll under load
• Fitment: Designed to replace factory springs on original equipment mounting points

Fits select 2017+ Subaru Impreza and XV (GT7) models.

RS-R Down Sus springs provide a performance-oriented lowering solution for the 2017+ Subaru Impreza and XV. Designed to lower the vehicle's center of gravity, these springs reduce body roll and improve handling response while maintaining a comfortable ride quality suitable for daily driving. By replacing the OE springs with RS-R’s precision-engineered coils, you achieve a more aggressive stance and tighter cornering performance.

• Provides a mild drop for improved aesthetics and aerodynamics
• Manufactured with high-tensile strength materials for long-lasting durability
• Designed to work with factory strut dampening
• Engineered to maintain original ride comfort while increasing spring rates
• Manufacturer Part Number: F511W

Fits 2017+ Subaru Impreza Sport 5-Door GT7 models.

RS-R Down Sus lowering springs provide a balanced suspension upgrade for the Subaru Impreza Sport, offering a more aggressive stance while maintaining excellent ride quality for daily driving. By lowering the vehicle's center of gravity, these springs reduce body roll and improve handling precision without the harshness often associated with performance suspension.

Every RS-R spring is manufactured to rigorous tolerances to ensure long-term durability and consistent performance. This Down Sus kit is specifically valved to work with factory dampers, making it a reliable choice for enthusiasts looking to improve both the aesthetics and the cornering dynamics of their 5-door Impreza.

• Manufacturer Part Number: F506W
• Front Spring Rate: 2.81kg/mm (2.81K)
• Rear Spring Rate: 4.29kg/mm (4.29K)
• Series: Down Sus
• Fitment: 2017+ Subaru Impreza Sport 5-Door (GT7)

Fits 2022 Subaru WRX.

RS-R Down Sus springs offer a balanced approach to suspension tuning for the 2022 Subaru WRX, delivering a more aggressive stance and improved handling without compromising daily drivability. These lowering springs are designed to work with factory dampers, reducing the vehicle's center of gravity and minimizing wheel gap for a cleaner profile.

• Manufacturer Part Number: F405D
• Product Line: Down Sus
• Precision-engineered to replace factory coil springs
• Compatible with original equipment (OE) shocks and struts
• Includes a complete set for front and rear suspension

Fits 2022 Subaru BRZ.

The RS-R Super Down Sus lowering springs are engineered to provide an aggressive drop for enthusiasts looking to maximize both aesthetics and handling performance. This kit (F067S) significantly lowers the vehicle's center of gravity, reducing body roll during high-speed cornering and providing a more planted feel on the road. By eliminating excess wheel gap, these springs deliver a sleek, performance-oriented stance without compromising the structural integrity of the suspension.

Each spring is manufactured using high-quality materials and precise winding techniques to ensure consistent spring rates and long-term sag resistance. Designed to work in harmony with the vehicle's chassis, these springs improve steering response and mechanical grip while maintaining a manageable ride quality for daily driving.

• Aggressive lowering for improved aerodynamics and a better stance
• Enhanced handling characteristics with reduced body roll
• Precision-manufactured for consistent performance and durability
• Designed to fit the factory suspension geometry of the 2022 BRZ
• Manufacturer Part Number: F067S

Fits 2022-2024 Subaru BRZ models.

RS-R Down Sus lowering springs provide an immediate improvement to the ZD8 chassis Subaru BRZ by lowering the center of gravity and reducing the factory wheel gap. These springs are engineered to enhance handling response and cornering stability while maintaining a ride quality that remains comfortable for daily street use.

Designed to work harmoniously with original equipment dampers, the Down Sus series provides a refined stance without the harshness often associated with aggressive track springs. Each spring is precision-wound to ensure consistent rates and long-term durability against sagging.

• Provides a balanced drop for improved aesthetics and aerodynamics
• Reduced body roll and improved steering feedback
• Specifically tuned for the second-generation BRZ weight distribution
• Compatible with factory struts and mounting hardware
• Manufacturer Part Number: F067D

This kit includes a complete set of front and rear lowering springs.

Fits 2017-2024 Chrysler Pacifica models.

The RS-R Down Sus Lowering Springs (CHR300W) provide a refined drop for the Chrysler Pacifica, enhancing both the vehicle's aesthetic stance and its cornering stability. By lowering the center of gravity, these springs reduce body roll and improve overall handling without sacrificing the compliant ride quality necessary for a family-focused minivan.

Every Down Sus spring is engineered to work in harmony with factory shock absorbers, ensuring a direct fit and maintaining proper suspension geometry. RS-R utilizes high-quality materials and precision winding techniques to prevent sagging over time, providing a reliable performance upgrade for enthusiasts looking to eliminate unsightly wheel arch gap.

• Provides a subtle, aggressive stance and improved center of gravity
• Designed for a balanced ride that retains daily drivability
• Precision CNC-wound for consistent spring rates and durability
• Compatible with factory struts and dampers
• Manufacturer Part Number: CHR300W

Fits 2014-2015 Mitsubishi Mirage DE, ES, and RF models.

RS-R Down Sus springs provide a refined lowering solution for the Mitsubishi Mirage (A05A), balancing a more aggressive aesthetic with the ride quality required for daily driving. By lowering the vehicle's center of gravity, these springs reduce body roll during cornering and improve overall stability. Each spring is designed to work within the performance envelope of your factory struts, ensuring a technical upgrade that doesn't compromise longevity.

• Precision-engineered for the 2014-2015 Mitsubishi Mirage chassis
• Provides a modest drop for improved stance and reduced fender gap
• Designed to maintain comfortable ride characteristics while enhancing handling
• Direct replacement for factory coil springs
• Manufacturer Part Number: B200D

Fits 2016-2024 Mazda MX-5 Miata and MX-5 Miata RF (Sport, Club, Grand Touring, and Anniversary editions).

Progress Technology Sport-lowering springs are engineered to significantly improve the handling and stance of the ND chassis by lowering the center of gravity and reducing body roll. These sport-tuned springs provide a more aggressive appearance while maintaining a street-friendly ride quality. While designed to work with OEM shocks, these springs offer even greater performance when paired with high-performance dampers such as Bilstein, Koni, or Tokico.

Each spring is manufactured from certified high-tensile SAE spring wire and cold-wound on precision CNC machines. To ensure maximum durability and consistent ride height, the springs are stress-relieved, pre-set, and shot-peened. A durable powder-coated finish protects against corrosion in harsh driving environments.

• Front Lowering: 1.3 inches
• Rear Lowering: 1.0 inches
• Front Spring Rate: 180 lb/in
• Rear Spring Rate: 115 lb/in
• Construction: CNC cold-wound SAE spring wire
• MPN: 40.1134

Fits 2006-2008 Mazda MX-5 Miata models including Base, Club Spec, Grand Touring, Sport, SV, and Touring.

Improve your Miata's center of gravity and handling precision with Progress Technology Sport lowering springs. These springs are engineered to reduce body roll and provide a more responsive driving experience without sacrificing ride quality. While designed to integrate seamlessly with OEM shocks, these springs are ideally suited for high-performance dampers like Bilstein, Koni, or Tokico to further refine the suspension's rebound characteristics.

Constructed for longevity, Progress specifies only certified high-tensile SAE spring wire. Each coil is cold-wound on CNC machinery, then undergoes a thorough stress-relieving, pre-setting, and shot-peening process to ensure maximum durability and consistent ride height over time. A durable powder-coated finish provides a long-lasting barrier against the elements.

• Manufacturer Part Number: 40.1132
• Front Lowering: 0.5 inches
• Rear Lowering: 0.5 inches
• Front Spring Rate: 126 lb/in
• Rear Spring Rate: 116 lb/in
• Material: Certified high-tensile SAE spring wire
• Finish: Powder-coated for corrosion resistance

Fits 2009-2013 Subaru Forester X and XT models (SH chassis).

Pedders SportsRyder lowering springs are engineered to provide a performance-oriented stance while maintaining the ride quality necessary for a daily driver. By lowering the center of gravity, these springs reduce body roll and improve handling response through corners. Unlike generic lowering kits, Pedders SportsRyder components are designed specifically for the SH Forester chassis to correct original equipment weaknesses and deliver a balanced feel between civility and performance.

Each spring is manufactured to strict tolerances to ensure consistent performance and durability. These springs are built for the enthusiast who wants a "factory hot rod" feel—quiet, comfortable, and responsive during spirited driving.

• Manufacturer Part Number: PED-804015
• Product Line: SportsRyder
• Chassis Type: SH
• Reduces body roll and improves cornering stability
• Maintains daily-driver comfort levels
• Engineered as a direct-fit solution for the SH-chassis Forester

Vehicle Fitment

Fits 2003-2008 Subaru Forester SG models including X, XS, XT, and Sports trims.

Pedders SportsRyder Lowering Springs are engineered to provide the ideal balance between performance handling and daily civility. Unlike generic lowering kits, Pedders components are developed by identifying weaknesses in the factory suspension and creating solutions that offer a precise, "factory hot rod" feel—quiet, comfortable, and responsive.

Built for the automotive enthusiast, these springs lower the vehicle's center of gravity to reduce body roll and improve cornering stability. Pedders engineers focus on achieving a specific "Pedders feel," ensuring that your Forester handles the race course with ease while remaining a comfortable daily driver.

• Manufacturer Part Number: PED-804014
• Product Line: SportsRyder
• Chassis Fitment: SG Series
• Optimized for improved handling and stance
• Engineered to meet or exceed OE performance levels

Fits 2004-2006 Pontiac GTO Base.

Pedders SportsRyder FE2 height springs are engineered to provide a premium suspension solution for the 2004-2006 Pontiac GTO, addressing the common weaknesses found in original equipment components. Designed to maintain the factory FE2 ride height while significantly enhancing handling characteristics, these springs offer the ideal balance between daily-driver civility and performance response. Pedders utilizes high-grade materials and rigorous testing to ensure each spring provides a quiet, comfortable ride without sacrificing the direct steering feel and cornering stability enthusiasts demand.

• Direct replacement for factory coil springs to maintain FE2 ride height
• Engineered to improve handling response and reduce body roll
• Manufactured to strict tolerances for consistent performance and longevity
• Provides a "factory hot rod" feel with a balance of comfort and control
• Manufacturer Part Number: PED-804010

Fits 2004-2006 Pontiac GTO Base (V6).

Pedders SportsRyder Low Springs are engineered to provide the ideal balance between performance handling and street civility. Specifically developed for the 2004-2006 Pontiac GTO chassis, these springs address the inherent weaknesses of the factory suspension to deliver a "factory hot rod" feel—offering a lower center of gravity and improved steering response without the harshness often associated with race-only components.

As part of the renowned SportsRyder range, these springs are the result of rigorous R&D, designed to perform exceptionally well on both the street and the occasional track day. Each spring is manufactured to strict tolerances to ensure consistent ride height and predictable handling characteristics, replacing worn OE components with a performance-oriented solution.

• Manufacturer Part Number: PED-804009
• Series: SportsRyder
• Part Type: Lowering Springs
• Fitment: Replaces factory springs on 2004-2006 Pontiac GTO
• Performance: Enhanced handling with maintained ride quality

Fits 2008-2009 Pontiac G8 Base, GT, and GXP models.

Pedders Heavy Duty Rear Coil Springs are specifically engineered to address rear-end sag and improve load-carrying capacity on the Pontiac G8 platform. These springs provide a 30mm raise over the factory ride height, making them an ideal solution for vehicles equipped with heavy trunk loads or for owners seeking increased ground clearance. Unlike generic replacement springs, Pedders components are designed by suspension specialists who identify and correct OE weaknesses, ensuring the PED-7855 maintains its height and spring rate through years of service.

Built to bridge the gap between factory comfort and performance handling, these heavy-duty coils offer a stable, controlled ride without the harshness often found in race-only setups. They install directly into the factory rear spring seats for a straightforward replacement of worn or soft original equipment.

• Manufacturer Part Number: PED-7855
• Position: Rear
• Ride Height Change: 30mm Raise
• Construction: Heavy Duty
• Application: Replaces sagging or worn OE rear springs

Fits 2004-2006 Pontiac GTO Base.

The Pedders PED-7843 X-Drag Rear Coil Spring is engineered to solve common suspension weaknesses in the factory GTO chassis. Specifically designed for enthusiasts who demand better weight transfer and squat control, these springs replace the often-fatigued or overly soft original equipment to provide a more stable and responsive launch. Whether used for street performance or on the drag strip, these springs maintain a balance between civility and high-performance handling.

By identifying the specific deficiencies in the factory coil design, Pedders developed this integrated suspension solution to ensure the vehicle remains composed under heavy load. The X-Drag series focuses on minimizing rear-end dip during hard acceleration, which improves traction and overall vehicle geometry during high-torque applications.

• Direct-fit replacement for factory rear coil springs
• Specially tuned rate for X-Drag performance and squat control
• Corrects OE sagging issues common to the 2004-2006 GTO platform
• Manufactured to precise tolerances for consistent ride height and spring rate
• Manufacturer Part Number: PED-7843

Fits select 2005-2017 Chrysler 300, Dodge Challenger, Charger, and Magnum.

The Pedders PED-7841 Heavy Duty Rear Coil Spring is engineered to correct the sagging and handling instabilities often found in original equipment suspension. Developed through rigorous testing on road courses and daily drivers, this spring provides a precise balance between performance handling and factory civility. Designed as a direct-fit replacement for the LX/LC platform, it improves load capacity and rear-end stability, ensuring a quiet and comfortable ride while maintaining the control expected by performance enthusiasts.

• Manufacturer Part Number: PED-7841
• Position: Rear
• Duty Rating: Heavy Duty
• Vehicle Platform: Chrysler LX / Dodge LC
• Construction: High-grade spring steel for long-term durability
• Benefit: Corrects OE weaknesses and restores proper ride height

Fits select 2007-2019 Hyundai Santa Fe, Santa Fe XL, and Kia Sorento models.

The Pedders PED-7665 Heavy Duty Rear Coil Spring is engineered as a direct replacement for the original equipment, designed specifically for drivers who require additional support without altering the vehicle's factory stance. This single coil spring maintains the stock ride height while offering a 10% firmer spring rate than the factory component. This increase in rate helps reduce rear-end sag when towing or carrying heavy cargo, improving chassis stability and headlight aim under load.

Pedders manufactures these springs to meet or exceed OE standards, ensuring consistent performance and durability throughout the life of the vehicle. Whether used for daily commuting or heavy-duty utility, this spring provides the ideal balance between ride comfort and enhanced handling under load.

• Maintains factory stock ride height
• 10% firmer spring rate than original equipment
• Heavy-duty construction for improved load support and towing stability
• Direct-fit replacement for the rear suspension assembly
• Manufacturer Part Number: PED-7665

Fits 2004-2006 Pontiac GTO Base.

This Pedders stock height rear coil spring is engineered as a direct-replacement solution for the 2004-2006 Pontiac GTO. Over time, the factory rear springs on the GTO chassis are prone to premature fatigue and sagging, which negatively impacts both aesthetics and suspension geometry. This heavy-duty replacement restores the original factory ride height while providing the durability required for enthusiast driving.

Pedders focuses on identifying and correcting weaknesses in original equipment (OE) components. By manufacturing these springs to precise tolerances, Pedders ensures a consistent spring rate that balances daily-driver civility with improved handling stability. This spring is ideal for owners looking to maintain the factory stance while upgrading to a more robust, performance-oriented coil.

• Product Type: Rear Coil Spring
• Ride Height: Stock Height
• Restores factory chassis geometry and prevents rear-end sag
• Engineered for enthusiast-level durability and comfort
• Sold as a single unit
• Manufacturer Part Number: PED-7643

Fits 2008-2017 Pontiac G8 (Base, GT, GXP) and Chevrolet SS.

This Pedders rear coil spring is engineered for the Zeta platform to provide a specific Low FE2 ride height. Designed to replace worn or soft factory springs, it addresses the common weaknesses found in original equipment suspension by offering an ideal balance between daily-driver civility and performance handling. Each spring is manufactured to exacting tolerances to ensure a consistent spring rate and precise vehicle height.

• Direct replacement for factory rear springs on select GM performance sedans
• Achieves a Low FE2 ride height for improved aesthetics and center of gravity
• Heavy-duty construction optimized for the enthusiast driver
• Engineered to maintain ride comfort while reducing body roll and squat
• Manufacturer Part Number: PED-2957

Fits 2004-2006 Pontiac GTO Base.

The Pedders SportsRyder Front Coil Spring is an engineered suspension solution designed to provide the ideal balance between street-driven civility and performance handling. Developed as a direct-fit replacement for the 2004-2006 Pontiac GTO, this spring is specifically calibrated to maintain the FE2 ride height while addressing the common weaknesses found in original equipment suspension components.

As part of the Pedders SportsRyder range, this spring (PED-2956) is built for enthusiasts who demand a responsive, "factory hot rod" feel without sacrificing ride quality. Each coil is manufactured to high tolerances to ensure long-term durability and consistent performance, whether on the highway or the race course.

• Manufacturer Part Number: PED-2956
• Ride Height: FE2 Height
• Component Type: Front Coil Spring (Single)
• Fitment: 2004-2006 Pontiac GTO
• Series: SportsRyder

Fits 2008-2017 Pontiac G8 (Base, GT, GXP) and Chevrolet SS.

Pedders lowering springs are engineered to improve your vehicle's center of gravity and stance without compromising the ride quality required for a daily driver. This front coil spring (PED-2954) replaces the factory component to reduce wheel gap and sharpen handling response. By identifying and correcting the weaknesses in the original equipment suspension, Pedders delivers a factory-performance feel that balances civility with enhanced cornering stability.

• Specifically tuned for the Zeta chassis platform
• Reduces front ride height for a lower, more aggressive profile
• High-quality construction designed to withstand performance driving conditions
• Direct fitment to factory mounting points
• Manufacturer Part Number: PED-2954

Note: These springs are sold individually. For a complete front axle installation, please order a quantity of two.

Fits select 2005-2017 Chrysler 300, 2005-2008 Dodge Magnum, 2006-2017 Dodge Charger, and 2008-2010 Dodge Challenger.

Engineered to improve both the stance and handling of the Chrysler LX and Dodge LC/LD platforms, this Pedders front low spring (PED-2940) replaces the factory front coil to provide a lower center of gravity without sacrificing daily drivability. Pedders specialists develop these components by identifying weaknesses in the original equipment (OE) suspension, creating a solution that balances performance handling with civility.

Each spring is manufactured to tight tolerances to ensure consistent ride height and spring rate across the vehicle. This "low" version is specifically designed for enthusiasts who want a more aggressive look and reduced body roll during cornering, while maintaining the quiet, comfortable ride quality characteristic of a factory hot rod.

• Position: Front
• Ride Height: Low
• Quantity: Sold individually (Each)
• Manufacturer Part Number: PED-2940
• Construction: High-quality spring steel engineered for longevity and performance
• Fitment: Direct replacement for OE front springs on supported Chrysler/Dodge rear-wheel-drive platforms

Fits 2004-2006 Pontiac GTO Base.

The Pedders PED-2643 rear lowering coil spring is engineered to enhance the handling profile and stance of the 2004-2006 Pontiac GTO. Designed as a direct replacement for the factory rear springs, this "Low" variant reduces the vehicle's ride height to lower the center of gravity while maintaining the civil ride quality Pedders is known for.

Pedders suspension components are developed by identifying weaknesses in original equipment (OE) designs and correcting them through rigorous R&D. These springs are manufactured to meet high tolerances, ensuring a consistent spring rate that balances daily driving comfort with performance handling on the street or track. Each spring is designed to provide a factory-like fit while offering the increased stiffness required for performance driving.

• Optimized Stance: Provides a lowered ride height for a more aggressive appearance and improved aerodynamics.
• OE-Style Engineering: Designed to install directly into factory mounting points as a specific suspension solution.
• Performance Balance: Tuned for the enthusiast driver to provide the ideal middle ground between civility and performance.
• Durable Construction: Manufactured to withstand rigorous use while resisting sagging over time.
• Manufacturer Part Number: PED-2643

Fits 2004-2006 Pontiac GTO Base models.

Restore chassis balance and eliminate common rear-end sag with the Pedders PED-2589 heavy-duty rear coil spring. This component is specifically engineered to maintain the factory FE2 ride height, providing between 0-5mm of lift to return the vehicle to its intended geometry. It serves as a direct replacement for worn or fatigued OE springs, offering a significant upgrade in durability and load-bearing consistency.

Constructed for the enthusiast who demands a "factory hot rod" feel, this spring features a 7.3 kg/mm rate. This specification provides a firm, controlled ride that reduces body roll and prevents excessive squat under acceleration without inducing the harshness found in dedicated track springs. It is the ideal solution for maintaining daily drivability while improving overall handling performance.

• Position: Rear
• Spring Rate: 7.3 kg/mm
• Ride Height: FE2 Standard (0-5mm lift)
• Heavy-duty construction for improved service life
• Direct fit to factory mounting points
• Manufacturer Part Number: PED-2589

Fits select 2007-2019 Hyundai Santa Fe, Santa Fe Sport, Santa Fe XL, and Kia Sorento (2.0T).

The Pedders Rear Coil Spring (PED-240154) is engineered as a direct replacement for sagging or worn factory springs. Designed by specialists to address original equipment weaknesses, this coil spring restores the vehicle's proper ride height and handling stability. It provides a precise balance between daily driving civility and enhanced performance handling, effectively correcting the soft or unsettled feel common in high-mileage OE suspensions.

Built for the enthusiast driver, this spring ensures your SUV maintains a composed, controlled feel whether you are commuting or hauling a full load. Every Pedders component is developed through rigorous testing to ensure it meets or exceeds the performance levels of the factory parts it replaces.

• Direct fit for the factory rear spring location
• Corrects OE suspension weaknesses to restore handling precision
• Engineered to provide a balance of comfort and stability
• High-quality construction for long-term durability and sag resistance
• Manufacturer Part Number: PED-240154

Fits 2004-2006 Pontiac GTO Base.

The Pedders Low Front Coil Spring is engineered to address specific suspension weaknesses found in the original equipment. Developed through rigorous research and development, these springs are designed to achieve the "Pedders feel"—a precise balance between daily-driver civility and performance-oriented handling. By reducing the front ride height, this spring lowers the vehicle's center of gravity for improved cornering and a more aggressive stance.

Unlike race-only components, Pedders springs are built for the enthusiast driver, ensuring the vehicle remains quiet and comfortable on the street while performing at a high level on the course. This spring replaces the worn OE unit to restore and enhance steering response and chassis control.

• Specifically tuned for 2004-2006 Pontiac GTO applications
• Low ride height configuration for improved aesthetics and handling dynamics
• Engineered to eliminate factory suspension weaknesses
• Heavy-duty construction for long-term durability and consistent ride height
• Manufacturer Part Number: PED-2151R