Fits 2004-2006 Pontiac GTO (V8).

Pedders 2142R front coil springs are engineered as a precision suspension solution for the 2004-2006 Pontiac GTO. Developed by identifying and correcting the weaknesses in the factory OE suspension, these springs are designed to achieve the signature "Pedders feel"—the ideal balance between daily-driver civility and high-performance handling. Unlike generic springs, these are built to suit the automotive enthusiast who demands a quiet, comfortable ride that performs exceptionally well on both the street and the course.

This specific spring maintains the stock FE2 height, providing a direct replacement or upgrade that preserves the factory stance while enhancing spring rate consistency and durability. Each component is manufactured to strict tolerances, ensuring your GTO feels like a factory hot rod with improved control and reduced body roll.

• Manufacturer Part Number: PED-2142R
• Spring Rate: 3.3 kg/mm
• Ride Height: Stock FE2 Height
• Position: Front
• Fitment: 2004-2006 Pontiac GTO Base (V8)
• Quantity: Sold individually (Each)

Fits 2004-2006 Pontiac GTO Base (V8).

The Pedders PED-2142L front coil spring is engineered to address the inherent weaknesses of the factory suspension on the 2004-2006 Pontiac GTO. Designed for the enthusiast who demands a balance between civility and performance, this spring delivers a lowered stance and improved handling without the harshness associated with track-only components. By refining the spring rate to 3.3 kg/mm, Pedders ensures your GTO maintains a "factory hot rod" feel—quiet, comfortable, and exceptionally controlled through the corners.

• Manufacturer Part Number: PED-2142L
• Spring Rate: 3.3 kg/mm
• Ride Height: Low (Comparable to Stock FE2 specifications)
• Placement: Front
• Fitment: Direct replacement for OE front springs

Each spring is manufactured to strict tolerances to ensure consistent performance across the axle. Sold individually; two required per vehicle.

Fits select 2004-2024 Nissan Titan, Armada, and Pathfinder Armada (2WD/4WD) models.

Improve your truck or SUV's stance and handling with these MaxTrac front lowering coil springs. Designed to provide a precise 2-inch drop, these springs are hot wound to ensure they maintain their specific tolerances and ride height without sagging or fading over time. Each spring is finished in a durable grey powder coating to provide superior corrosion resistance against road debris and moisture.

These coils are engineered as direct replacements for the factory units. To maintain optimal ride quality and damping at the new lower center of gravity, aftermarket shocks designed for lowered vehicles are highly recommended. These springs offer a straightforward way to achieve a custom look without sacrificing the structural integrity of your suspension system.

• Part Number: 255320
• Drop Height: 2-inch (Front)
• Material: Hot wound steel for long-term durability
• Finish: Grey powder coat for rust and corrosion prevention
• Manufacturing: Made in the USA
• Recommended: Shocks designed for lowered travel height

Fits select 2004-2020 Ford F-150 and F-150 Heritage models.

Improve your truck's stance and handling with MaxTrac front lowering coils. These springs are engineered to provide a 2-inch drop while maintaining a comfortable ride quality suitable for daily driving. Unlike inferior springs that may sag, these coils are hot-wound in the USA to ensure precise tolerances that will not fade or settle over time.

• Hot-wound for superior durability and consistent ride height
• Provides a 2-inch front drop for a leveled or lowered look
• Durable grey powder coat finish to eliminate rust and corrosion
• Designed to work with factory mounting points
• Made in the USA
• Manufacturer Part Number: 253120

Fits 1998-2009 Ford Ranger 2WD (4-Cylinder, Non-StabiliTrak models) including Edge, EV, Postal, Splash, Sport, STX, Tremor, XL, and XLT.

Achieve a more aggressive stance and improved center of gravity with MaxTrac 3-inch front lowering coil springs. These springs are specifically engineered for the 2WD 4-cylinder Ford Ranger to provide a significant drop without sacrificing ride quality. Every spring is hot wound to precise tolerances, ensuring the steel maintains its structural integrity and ride height without fading or sagging over time.

To protect against rust and road debris, these coils feature a durable grey powder-coated finish. Designed as a direct replacement for your factory front springs, these MaxTrac coils are proudly made in the USA and offer a straightforward path to lowering your truck's front end.

• Part Number: 253030-4
• Drop Height: 3 Inches
• Position: Front
• Construction: Hot wound steel
• Finish: Grey powder coat
• Compatibility: 2WD 4-Cylinder models only
• Origin: Made in the USA

Fits select 2014-2020 Cadillac Escalade/ESV, Chevrolet Silverado 1500/Suburban/Tahoe, and GMC Sierra 1500/Yukon/XL models with cast steel suspension and Extended or Crew Cab configurations.

Lower your vehicle's front ride height by 2 inches while maintaining street-friendly handling with MaxTrac front lowering coil springs. These springs are hot wound to precise tolerances to ensure the height will not sag or "fade" over time, providing a consistent stance for the life of the vehicle. Each spring is finished in a durable grey powder coat to protect against rust and corrosion.

• Drop Height: 2 inches (Front)
• Construction: Hot wound for precise tolerances and long-term height retention
• Finish: Grey powder coating for superior corrosion resistance
• Compatibility: Designed for vehicles with cast steel suspension only
• Requirement: Will NOT work with factory Magnetic Ride Control / Magnetic Suspension
• Origin: Made in the USA
• Manufacturer Part Number: 251520-8

Fits select 2014-2020 Cadillac Escalade, Chevrolet Silverado 1500, Tahoe, GMC Sierra 1500, and Yukon models (Single Cab / Cast Steel Suspension).

Improve your vehicle's stance and center of gravity with MaxTrac 2-inch front lowering coils. These springs are specifically engineered for GM 1500 trucks and SUVs equipped with factory cast steel suspension components, providing a precise 2-inch drop that levels out the front end without compromising ride quality.

Every MaxTrac coil spring is made in the USA and hot-wound to ensure exact tolerances. This manufacturing process prevents the springs from sagging or losing height over time, a common issue with inferior cold-wound alternatives. To ensure long-term durability, the coils are finished in a signature grey powder coating that provides superior resistance to rust and road debris.

• Drop Height: 2 inches
• Position: Front
• Material: Hot-wound steel for precise tolerances
• Finish: Grey powder coat for corrosion resistance
• Configuration: Compatible with Single Cab models with Cast Steel suspension
• Country of Origin: Made in the USA
• Manufacturer Part Number: 251520-6

Fits select 1999-2007 Chevrolet Silverado and GMC Sierra 1500 / 1500 HD models (2WD V8).

Lower your truck's front end while maintaining factory ride quality with MaxTrac 2-inch front lowering coil springs. These springs are specifically engineered for the 2WD GM 1500 platform to provide a leveled, aggressive stance without the harshness often associated with lowering. Unlike cold-wound alternatives that can sag or "fade" over time, these coils are hot-wound to ensure they hold their height and spring rate through years of use.

Manufactured in the USA, each spring is finished in a durable grey powder coating to provide maximum protection against rust and corrosion in harsh road conditions.

• Provides a precise 2-inch front drop
• Hot-wound construction for long-term durability and height consistency
• Grey powder-coated finish for superior rust and corrosion resistance
• Designed to maintain comfortable, factory-like ride characteristics
• Made in the USA
• Manufacturer Part Number: 250920-8

Fits 1999-2007 Chevrolet Silverado 1500 / 1500 HD and GMC Sierra 1500 / 1500 HD (2WD V8 models).

Achieve a precise front-end stance with MaxTrac 1-inch lowering coil springs. These springs are engineered to provide a subtle drop while maintaining ride quality on 2WD V8-equipped GM 1500 trucks. Unlike cold-wound alternatives that can sag over time, these coils are hot-wound to ensure tight tolerances and consistent spring rates throughout the life of the vehicle.

Each spring is finished in a durable grey powder coat to provide maximum resistance against corrosion and road debris. Manufactured in the USA, these coils offer a direct-fit solution to lower your center of gravity for improved handling and a cleaner aesthetic without the harshness of a race-spec setup.

• Provides 1-inch of front lowering
• Hot-wound construction prevents spring fatigue and sagging
• Durable grey powder coat finish for rust resistance
• Maintains comfortable factory-style ride quality
• Made in the USA
• Manufacturer Part Number: 250910-8

Fits 1988-1999 Chevrolet and GMC C1500, C1500/C2500 Suburban, Tahoe, and Yukon 2WD models equipped with a V8 engine and 5 or 6-lug hubs.

MaxTrac lowering coil springs (MPN 250510-8) provide a controlled 1-inch drop for the front suspension of your GM truck or SUV. These springs are engineered to improve handling and level out your vehicle's stance without sacrificing the comfort of a factory ride. Unlike inferior alternatives, these springs are hot wound to ensure precise tolerances and prevent the height from fading or sagging over years of use.

• Drop Height: 1-inch front lowering
• Construction: Hot wound for durability and consistent spring rates
• Finish: Grey powder coating for superior rust and corrosion resistance
• Installation: Direct replacement for factory front coil springs
• Origin: Proudly made in the USA
• Manufacturer Part Number: 250510-8

Fits select 1963-1973 GM A-Body vehicles including Buick Skylark, Chevrolet Chevelle and El Camino, Oldsmobile Cutlass and 442, and Pontiac GTO and LeMans with Big Block engines.

Lower your vehicle's center of gravity and improve handling without sacrificing ride quality with Hotchkis Sport Suspension lowering coil springs. These springs are designed to provide a 1-inch drop from factory ride height on average, offering a more aggressive stance and reduced body roll during cornering for improved performance.

Each spring is precision-wound from high-quality steel and finished in a durable gray powder coat for long-lasting corrosion resistance. The 580 lb/in spring rate is specifically tuned for iron-headed Big Block applications to balance performance with street comfort. Note: Big Block cars using aluminum heads or Pontiac engines such as the 400 should utilize the 1901F small block spring to achieve the correct ride height.

• Manufacturer Part Number: 1916F
• Drop: 1 in. average lower than factory ride height
• Spring Rate: 580 lb/in
• Construction: Precision-wound high-quality steel
• Finish: Gray powder coated
• Included Hardware: Bump stops

Fits 2020-2024 Toyota Supra (A90).

The HKS Adjustable Spring Kit (MPN 80280-AT001) offers a height-adjustable suspension solution for the A90 chassis while retaining the factory Adaptive Variable Suspension (AVS) dampers. This system replaces the original fixed spring perches with threaded sleeves, allowing you to fine-tune the ride height and center of gravity for improved handling and a more aggressive stance without sacrificing the OE electronically controlled damping.

Engineered for high-performance street and track use, this kit provides the flexibility of a coilover system by utilizing the factory strut bodies. HKS uses high-tensile strength springs to ensure durability and consistent performance over time, maintaining the ride quality expected from the Supra platform.

• Manufacturer Part Number: 80280-AT001
• Compatible with factory electronic dampers (AVS)
• Threaded height adjustment sleeves for precise corner weighting
• Replaces original spring seats for a direct, bolt-on installation
• Includes all necessary hardware and adjustment wrenches

Fits 2022-2025 Volkswagen Taos S, SE, SE Black, and SEL models.

H&R Sport Springs (MPN 54861-2) are engineered to lower the center of gravity and reduce body roll on the Volkswagen Taos. These springs provide a more aggressive stance by reducing the factory fender well gap, resulting in a more streamlined profile and improved aerodynamics. Built with a progressive spring rate, this kit enhances handling precision and cornering stability while maintaining the ride quality and comfort required for daily driving.

• Lowers vehicle center of gravity for improved handling and stability
• Reduces body roll and minimizes fender well gap
• Progressive spring rate design for superb ride quality
• Manufactured from high-tensile strength spring steel
• Direct replacement for factory coil springs
• Manufacturer Part Number: 54861-2

Fits 2019-2020 Volkswagen Jetta (including GLI Autobahn, R-Line, S, SE, SEL, and SEL Premium).

H&R Sport Springs are designed to enhance your vehicle's stance and handling by reducing the fender well gap and lowering the center of gravity. These springs utilize a progressive rate design, providing a firm response when needed while maintaining superb ride quality and daily-driver comfort. By reducing body roll and wind resistance, these springs offer a more streamlined profile and improved stability on the road.

• Material: High-tensile 54SiCr6 spring steel for strength and resilience
• Manufacturing: Shot peened and block set for maximum longevity
• Design: Progressive spring rate and lightweight construction
• Compatibility: Engineered to work with Dynamic Chassis Control (DCC) systems
• Origin: Precision manufactured in Germany
• Manufacturer Part Number: 54820

Fits 2018-2020 Volkswagen Atlas S and SE (2.0T).

H&R Sport Springs are engineered to enhance your vehicle's handling and aesthetics by lowering the center of gravity and reducing the fender well gap. Designed with a progressive spring rate, these springs provide improved cornering stability and reduced body roll while maintaining high ride quality and comfort. The lowered stance also improves aerodynamics by reducing wind resistance, potentially benefiting fuel efficiency.

Each spring is manufactured in Germany from high-tensile 54SiCr6 spring steel. To ensure long-term durability and consistent performance, every spring is shot-peened and block-set to prevent sagging over time. These are a direct replacement for factory springs and are designed to work with your vehicle's OE dampers.

• Manufacturer Part Number: 54795-2
• Material: 54SiCr6 Spring Steel
• Construction: Shot-peened and block-set for longevity
• Design: Progressive rate for balanced performance and comfort
• Origin: Made in Germany

Fits 2018-2020 Volkswagen Atlas models equipped with 4Motion AWD (2.0T).

H&R Sport Springs are the ideal solution for Atlas owners looking to improve handling and aesthetics without compromising ride quality. By lowering the vehicle's center of gravity, these springs reduce body roll and minimize fender well gap for a more aggressive, streamlined profile. The progressive spring rate design ensures the vehicle remains comfortable for daily commuting while providing increased stability during cornering and maneuvers.

Precision-engineered and manufactured in Germany, these springs are crafted from high-tensile 54SiCr6 spring steel. Each spring is shot-peened to extend service life and block-set to ensure they never sag or lose their original height. These components are designed to work with factory shocks to provide a direct-fit performance upgrade.

• Manufacturer Part Number: 54795
• Material: 54SiCr6 High-tensile spring steel
• Design: Progressive spring rate for optimal comfort and control
• Construction: Shot-peened and block-set for durability
• Origin: Made in Germany

Fits select 2011-2017 Volkswagen Touareg (Hybrid / TDI / V6 / VR6).

Improve the stance and handling of your vehicle with H&R Sport Springs. As H&R's most popular suspension upgrade, these springs are designed to lower the vehicle's center of gravity and reduce body roll for more precise cornering and improved driving dynamics. Each spring is engineered with a progressive rate to maintain superb ride quality while providing a more aggressive, streamlined appearance by reducing fender well gap.

Manufactured in Germany, these springs are crafted from high-tensile 54SiCr6 spring steel. Every spring is shot-peened to increase service life and block-set to prevent sagging over time. This ensures a durable, lightweight, and resilient suspension component that performs reliably under various driving conditions.

• Part Number: 54790-2
• Material: 54SiCr6 High-Tensile Spring Steel
• Construction: Shot-peened and block-set for durability
• Design: Progressive spring rate for performance and comfort
• Origin: Made in Germany

Fitment Applications:

Fits select 2011-2016 Volkswagen Touareg models including V6, TDI, Hybrid, and VR6 engines.

H&R Sport Springs are the ideal solution for drivers looking to enhance their vehicle's handling and stance. These springs lower the center of gravity and reduce body roll, providing more responsive control and a more streamlined profile by reducing the factory fender well gap. Engineered with a progressive spring rate, these components deliver improved performance while maintaining superb ride quality and comfort.

• Manufactured from high-tensile 54SiCr6 spring steel for maximum strength and resilience
• Precision shot-peened and block-set to ensure long-term durability and prevent sagging
• Progressive spring design provides a balance of performance and ride comfort
• Reduces wind resistance for a more aerodynamic profile
• Engineered and manufactured in Germany
• Manufacturer Part Number: 54790

Fits 2017-2019 Volkswagen Golf Alltrack and Golf SportWagen 4MOTION models (MK7 chassis).

H&R Sport Springs are engineered to enhance your vehicle's handling while providing a more aggressive stance. By lowering the center of gravity and reducing the fender well gap, these springs significantly minimize body roll during cornering. The progressive spring rate design ensures that you maintain superb ride quality and daily-driver comfort, even with the improved performance and streamlined aerodynamics.

Every H&R Sport Spring is manufactured in Germany using high-tensile 54SiCr6 spring steel. To ensure long-lasting performance and durability, each spring is shot-peened and block-set to prevent sagging over time.

• Manufacturer Part Number: 54789
• Material: 54SiCr6 Spring Steel
• Design: Progressive spring rate for optimal comfort and control
• Construction: Shot-peened and block-set for increased service life
• Origin: Made in Germany

Vehicle Fitment:

Fits 2015-2019 Volkswagen Golf SportWagen (MK7) models including S, SE, SEL, Limited Edition, and TDI trims (1.8T / TDI). Compatible with both standard and DCC (Dynamic Chassis Control) suspensions.

H&R Sport Springs are the premier upgrade for drivers looking to improve vehicle handling and aesthetics without sacrificing ride quality. These springs lower the MK7 chassis center of gravity, reducing body roll and fender well gap for a more planted, streamlined profile. Engineered with a progressive spring rate, they provide a comfortable ride during daily commuting while offering increased stiffness when pushed in corners.

Constructed from high-tensile 54SiCr6 spring steel, each spring is shot-peened and block-set to ensure maximum strength and resistance to sagging over time. This lightweight design reduces unsprung weight to help maintain suspension responsiveness.

• Manufacturer Part Number: 54788
• Material: High-tensile 54SiCr6 spring steel
• Construction: Shot-peened and block-set for longevity
• Design: Progressive spring rate for street performance
• Origin: Made in Germany
• Included: Set of front and rear springs

Fits 2015-2020 Volkswagen GTI models equipped with Dynamic Chassis Control (DCC).

H&R OE Sport Springs are engineered for drivers who want improved handling and a more controlled feel without a significant drop in ride height. These springs offer a subtle upgrade that reduces body roll and improves chassis response while maintaining the superb ride comfort expected from a daily driver. Designed specifically for vehicles equipped with DCC, these springs integrate seamlessly with your factory electronic damping system.

• Progressive spring rate for optimized performance and comfort
• Crafted from high-tensile 54SiCr6 spring steel for durability
• Shot-peened and block-set to ensure longevity and prevent sagging
• Maintains factory-like ride quality with slightly improved aesthetics
• Made in Germany
• Manufacturer Part Number: 54787-55

Fits 2015-2020 Volkswagen GTI models equipped with DCC, including Autobahn, Rabbit Edition, S, SE, and Sport trims.

H&R Sport Springs are engineered to enhance your vehicle's performance and stance. These springs lower the center of gravity, reducing body roll for flatter cornering and improved handling dynamics. The progressive spring rate design ensures a sporty feel without compromising daily driving comfort or ride quality.

Built for durability and performance, these springs are crafted from high-tensile 54SiCr6 spring steel. Each spring is shot-peened to increase service life and block-set to prevent sagging over time. By reducing the fender well gap, these springs provide a more streamlined profile and improved aerodynamics.

• Specifically designed for models with Dynamic Chassis Control (DCC)
• Manufactured from premium 54SiCr6 spring steel
• Shot-peened and block-set for maximum resiliency and longevity
• Progressive spring rate for balanced comfort and performance
• Precision-engineered lightweight design
• Manufacturer Part Number: 54787
• Made in Germany

Fits 2015-2019 Volkswagen Golf models including Base, Launch Edition, S, SE, SEL, Wolfsburg Edition, and TDI trims (1.8T).

H&R Super Sport Springs are designed for the seasoned enthusiast who wants a more aggressive drop than a standard sport spring while maintaining excellent daily ride quality. These high-tech progressive springs lower the vehicle's center of gravity to reduce body roll and improve handling response in corners. By reducing the fender-to-tire gap, they provide a performance-oriented stance that enhances the MK7 Golf's profile.

Crafted in Germany, these springs are manufactured from high-tensile 54SiCr6 spring steel. Each unit is shot-peened for increased durability and block-set to ensure it never sags or loses its intended ride height. These lightweight and resilient springs are engineered to work effectively with OE or performance-valved dampers.

• Manufacturer Part Number: 54786-77
• Material: Shot-peened 54SiCr6 Spring Steel
• Design: Progressive spring rate for ride comfort and performance
• Features: Block set for longevity; lightweight construction
• Origin: Made in Germany

Fits 2015-2016 Volkswagen Golf models (Base, Launch Edition, S, SE, SEL, and TDI) equipped specifically with a torsion beam rear axle.

H&R Sport Springs are the premier choice for drivers looking to enhance vehicle aesthetics and performance without compromising ride quality. These springs lower the MK7's center of gravity and reduce fender well gap for a more aggressive stance. The progressive spring rate design ensures a comfortable ride during daily driving while providing increased stability and reduced body roll during spirited maneuvers.

• Precision Materials: Manufactured from high-tensile 54SiCr6 spring steel for maximum strength and resilience.
• Durability: Every spring is shot-peened to increase service life and resistance to fatigue.
• Reliability: Block set to their solid length to ensure they never sag or lose ride height over time.
• Performance: Progressive rate design balances superb ride comfort with improved handling dynamics.
• Manufacturing: 100% engineered and made in Germany.
• MPN: 54786-2

Note: This kit is designed for vehicles with the torsion beam rear suspension configuration only. Please verify your vehicle's rear axle type before ordering.

Fits 1998-2005 Volkswagen Passat models, including the B5.5 facelift (1.8T / 2.0L).

H&R Sport Springs are designed to improve handling characteristics and vehicle aesthetics by lowering the center of gravity and reducing the factory fender well gap. These springs utilize a progressive rate design to maintain superb ride quality and comfort while significantly reducing body roll during cornering. This suspension upgrade also lowers wind resistance at higher speeds, contributing to a more streamlined profile.

• Material: Crafted from high-tensile 54SiCr6 spring steel for maximum strength and resilience.
• Durability: Shot peened and block set to ensure a long service life without sagging.
• Performance: Progressive spring design balances daily comfort with improved steering response.
• Manufacturing: Precision-engineered and manufactured in Germany.
• MPN: 54773

Fits select 2012-2019 Volkswagen Passat models including GT, R-Line, S, SE, SEL, and TDI.

H&R Sport Springs are engineered to enhance your vehicle's handling and aesthetic by reducing the fender well gap and lowering the center of gravity. This kit provides a more aggressive stance while significantly reducing body roll during cornering for improved lateral stability. Unlike standard linear springs, H&R utilizes a progressive spring rate design to maintain superb ride quality and daily-driver comfort while firming up under load for better performance.

Manufactured in Germany, these springs are crafted from high-tensile 54SiCr6 spring steel. To ensure long-term reliability and performance, each spring is shot-peened to increase service life and is "block set"—fully compressed during manufacturing—to ensure the suspension never sags or loses its calibrated ride height.

• Manufacturer Part Number: 54763-2
• Material: 54SiCr6 Spring Steel
• Design: Progressive Spring Rate
• Construction: Shot-Peened and Block-Set for maximum resilience
• Manufacturing: Made in Germany

Fits 2012-2019 Volkswagen Passat Sedan (1.8T, 2.5L, and TDI models).

H&R Sport Springs are engineered to enhance your vehicle's aesthetics and handling dynamics. By lowering the center of gravity and reducing the fender well gap, these springs provide a more aggressive stance while significantly reducing body roll during cornering. Each spring features a progressive rate design, which ensures that daily driving comfort is preserved while providing increased firmness when the suspension is loaded under spirited driving conditions.

Manufactured in Germany, these springs are crafted from high-tensile 54SiCr6 spring steel to ensure long-term resilience. The production process includes shot peening to increase service life and block setting to prevent future sagging, ensuring your Passat maintains its performance and ride height for years to come.

• Material: 54SiCr6 High-Tensile Spring Steel
• Manufacturing: Shot peened and block set for maximum durability
• Design: Progressive spring rate for superb ride quality and handling
• Performance: Reduced wind resistance and lower center of gravity
• Origin: Made in Germany
• Part Number: 54763

Fits select 2006-2019 Volkswagen Passat sedan models (2.5L / 1.8T / 2.0T) without 4Motion all-wheel drive.

H&R OE Sport Springs are engineered for drivers who want to enhance vehicle handling and control without a dramatic drop in ride height. These springs provide a subtle upgrade that reduces body roll and improves chassis response while maintaining a level of comfort suitable for daily driving. Designed and manufactured in Germany, each spring is crafted to meet precise tolerances for a perfect fit and long-term durability.

• Precision Engineering: Crafted from high-tensile 54SiCr6 spring steel for strength and resilience.
• Advanced Manufacturing: Shot-peened to increase service life and block-set to prevent sagging over time.
• Improved Dynamics: Progressive spring rate design enhances performance during cornering while preserving ride quality.
• German Quality: 100% made in Germany for superior craftsmanship and reliability.
• Part Number: 54760-55

Fits 2012-2013 Volkswagen Golf R Base (2.0T).

H&R Sport Springs are the premier upgrade for drivers looking to enhance both the performance and appearance of their vehicle. By lowering the center of gravity and reducing the fender well gap, these springs significantly decrease body roll and improve handling response. The progressive spring rate design is engineered to deliver a firm, sporty feel during spirited driving while maintaining a superb ride quality for daily use.

• Precision-wound from high-tensile 54SiCr6 spring steel
• Shot peened to increase service life and durability
• Fully block set to ensure the springs never sag or lose height
• Progressive rate design for a balanced mix of performance and comfort
• Reduces wind resistance for improved aerodynamics
• Manufactured in Germany
• Manufacturer Part Number: 54759

Fits 2010-2014 Volkswagen GTI Base, Driver's Edition, and Wolfsburg Edition (2.0T).

H&R Super Sport Springs are designed for the enthusiast looking for a more aggressive stance and sharper handling without sacrificing daily drivability. These high-tech progressive springs provide a lower center of gravity, significantly reducing body roll in corners and nose-dive under braking. Engineered to work with factory dampening, including models equipped with Dynamic Chassis Control (DCC), these springs offer a superior ride quality that remains comfortable for the street.

Crafted in Germany from high-tensile 54SiCr6 spring steel, each spring is shot-peened to increase service life by over 200% and is block-set to ensure they never sag. The lightweight design reduces unsprung weight for better suspension response.

• Manufactured from 54SiCr6 spring steel for strength and resilience
• Shot-peened for maximum durability and fatigue resistance
• Progressive spring rate design maintains ride comfort during normal driving
• Block set to prevent settling or sagging over time
• Compatible with factory DCC systems
• Made in Germany
• Manufacturer Part Number: 54758-77