Fits select 2008-2015 Audi TT Quattro and TT RS Quattro models, including vehicles equipped with Magnetic Ride Control (MRC).

H&R Sport Springs are engineered to deliver a lower center of gravity and reduced body roll for sharper handling and a more aggressive stance. These springs utilize a progressive rate design that provides a compliant ride during normal cruising while firming up under cornering loads for improved stability. Each spring is precision-wound from high-tensile 54SiCr6 spring steel and shot-peened to ensure maximum durability and resistance to sagging.

• Manufactured from 54SiCr6 spring steel for high strength and low weight
• Shot-peened to extend service life and prevent fatigue
• Progressive spring rate design maintains ride comfort while enhancing handling
• Fully block-set to ensure the springs never sag or lose their original height
• Reduces fender well gap and improves vehicle aerodynamics
• Made in Germany
• Manufacturer Part Number: 29102-2

Fits 2010-2017 Volvo XC60 models including 3.2, T5, and T6 (including R-Design and Dynamic trims).

H&R Sport Springs are engineered to deliver improved handling and a lower center of gravity while maintaining excellent ride comfort. By reducing the factory fender well gap, these springs provide a more aggressive stance and a more streamlined profile for reduced wind resistance. Each spring is crafted from high-tensile 54SiCr6 spring steel to ensure strength and resiliency over the life of the vehicle.

These springs utilize a progressive rate design, which offers a compliant ride during normal driving but firms up under load to reduce body roll during cornering. To ensure long-term durability and prevent sagging, every spring is shot-peened and block-set before leaving the ISO 9001 certified manufacturing facility in Germany.

• Manufacturer Part Number: 29098-6
• Material: 54SiCr6 Spring Steel
• Manufacturing: Shot-peened and block-set for maximum longevity
• Spring Design: Progressive rate for superior ride quality and performance
• Origin: Made in Germany

Fits 2007-2016 Volvo S80 2WD models including 3.2, T5, T6, and V8 engines.

H&R Sport Springs are designed to enhance the handling and aesthetics of your Volvo S80 by lowering the vehicle's center of gravity and reducing the fender well gap. These springs utilize a progressive spring rate to reduce body roll and wind resistance, improving responsiveness without sacrificing ride comfort for daily use. Each spring is precision-engineered in Germany to withstand high stress and resist sagging over time.

• Lowers center of gravity for improved handling and reduced body roll
• Progressive spring rate design provides superb ride quality and comfort
• Manufactured from high-tensile 54SiCr6 spring steel
• Shot-peened and block-set for increased strength and long-term resilience
• Lightweight, durable construction improves suspension efficiency
• Made in Germany
• Manufacturer Part Number: 29098-1

Fits 2007-2012 Suzuki SX4 (Base, Crossover, LE, Sport, Sport GTS, Sport S, Sport SE, and Sportback).

H&R Sport Springs are engineered to improve the handling and aesthetics of your Suzuki SX4. By lowering the vehicle's center of gravity, these springs reduce body roll during cornering and minimize the fender well gap for a more aggressive stance. The progressive spring rate design is precision-tuned to provide a significant upgrade in performance while maintaining the ride comfort required for daily driving. These springs also reduce wind resistance, helping to streamline the vehicle's profile.

• Manufactured from high-tensile 54SiCr6 spring steel for durability and resilience
• Shot-peened to extend service life and improve fatigue resistance
• Fully block-set to ensure the springs never sag or lose their original ride height
• Progressive rate design for a balance of performance and comfort
• Precision engineered and manufactured in Germany
• Part Number: 29093

Fits 2008-2013 Volvo C30 T5 and T5 R-Design models.

H&R Sport Springs are designed to enhance your vehicle's handling and aesthetics by lowering the center of gravity and reducing body roll. The progressive spring rate design ensures a balance between a performance-oriented stance and superb ride comfort, making it an ideal upgrade for daily drivers and enthusiasts alike.

Every H&R spring is manufactured in Germany using high-tensile 54SiCr6 spring steel. To ensure long-term durability and performance, these springs are shot-peened to extend service life and block-set to prevent sagging over time. This lightweight yet resilient construction provides a more streamlined profile and improved aerodynamics.

• Reduces fender well gap for a more aggressive look
• Lower center of gravity improves stability and handling
• Precision-engineered progressive spring rates for ride quality
• Shot-peened for 200% increased service life
• Manufactured from 54SiCr6 spring steel
• Made in Germany
• Manufacturer Part Number: 29086-2

Fits 2016 Scion iM and 2017-2018 Toyota Corolla iM Base models.

H&R Sport Springs are engineered to deliver a lower center of gravity and improved handling characteristics while maintaining high-quality ride comfort. By reducing body roll and closing the fender well gap, these springs provide a more aggressive stance and improved aerodynamics for your vehicle. Each spring is precision-manufactured to ensure long-term durability and consistent performance.

• Manufactured from high-tensile 54SiCr6 spring steel
• Shot-peened and block-set for increased service life and resistance to sagging
• Progressive spring rate design maintains superb ride quality for daily driving
• Reduced wind resistance and lower center of gravity for better stability
• Precision crafted in Germany
• Manufacturer Part Number: 29084-2

Fits 2012-2014 Mercedes-Benz CLS63 AMG Base and 4Matic models equipped with self-leveling suspension.

H&R Sport Springs are engineered to deliver a lower center of gravity and improved handling for the C218 chassis. By reducing the fender well gap, these springs provide a more aggressive stance while decreasing body roll for better cornering performance. Each spring is crafted using a progressive rate design, ensuring that ride quality remains comfortable during normal driving while becoming firmer under load for spirited maneuvers.

Constructed from high-tensile 54SiCr6 spring steel, these components are shot-peened to extend service life and block-set to prevent sagging over time. These lightweight, resilient springs are designed to integrate seamlessly with the factory self-leveling system to maintain vehicle balance and performance.

• Material: 54SiCr6 Spring Steel
• Construction: Shot-peened and block-set for durability
• Design: Progressive spring rate for optimal comfort and control
• Manufacturing: Made in Germany
• MPN: 29076-9

Fits 2010-2018 Mercedes-Benz E350 and E400 4Matic (W212) models equipped with self-leveling rear suspension.

H&R Sport Springs are engineered to deliver a lower center of gravity and reduced body roll for improved handling performance without sacrificing ride quality. By reducing the unsightly fender well gap, these springs provide a more aggressive stance and a streamlined profile that can help reduce wind resistance at highway speeds. Each spring is crafted with a progressive rate design, ensuring a comfortable ride during normal cruising while becoming firmer under load for better control during spirited driving.

Manufactured in Germany, H&R springs are built to exacting standards using high-tensile 54SiCr6 spring steel. To ensure long-term durability and consistent ride height, every spring is shot-peened and block-set to prevent sagging over time.

• Fitment: 2010-2018 Mercedes-Benz E350/E400 4Matic (W212)
• Material: High-tensile 54SiCr6 spring steel
• Manufacturing: Shot-peened and block-set for longevity
• Design: Progressive spring rate for superior ride quality and handling
• Origin: Made in Germany
• MPN: 29076-8

Fits 2008-2014 Mercedes-Benz C300 and C350 4Matic Luxury and Sport models (W204 chassis).

H&R Sport Springs are engineered to enhance your vehicle's handling characteristics by lowering the center of gravity and reducing body roll. This kit eliminates excessive fender well gap for a more aggressive stance while the progressive spring rate design ensures superb ride quality and daily-driving comfort. By lowering the vehicle, these springs also reduce wind resistance, contributing to a more streamlined profile and improved aerodynamic efficiency.

Precision-manufactured in Germany, these springs are crafted from high-tensile 54SiCr6 spring steel. To ensure maximum durability and prevent sagging, every spring is shot-peened and block-set. This lightweight yet resilient construction provides the high-performance response expected from the world's leading spring manufacturer.

• Manufacturer Part Number: 29076-5
• Series: H&R Sport Spring
• Material: 54SiCr6 Spring Steel
• Manufacturing: Shot-peened and block-set for longevity
• Rate Type: Progressive spring design
• Origin: Made in Germany

Fits select 2008-2015 Smart Fortwo models (451 chassis), including Brabus, Electric Drive, Passion, and Pure.

H&R Sport Springs are engineered to deliver improved handling and a lower ride height while maintaining excellent ride comfort. By lowering the vehicle's center of gravity, these springs reduce body roll and minimize the fender well gap for a more aggressive stance. The progressive spring rate design ensures the suspension remains compliant during normal driving but firms up under load for better cornering performance.

Every H&R spring is manufactured in Germany using high-tensile 54SiCr6 spring steel. To ensure long-term durability and consistent ride height, each spring is shot-peened and block-set to prevent sagging over time. This lightweight, resilient construction also contributes to reduced wind resistance and improved aerodynamics.

• Manufacturer Part Number: 29067-1
• Material: High-tensile 54SiCr6 spring steel
• Design: Progressive spring rate
• Manufacturing: Shot-peened and block-set for longevity
• Origin: Made in Germany

Fits select 2009-2017 Audi A4, RS5, and S5 models.

H&R Sport Springs (MPN 29061-2) are engineered to enhance your vehicle's stance and handling performance by lowering the center of gravity and reducing body roll. These springs provide a more aggressive profile by narrowing the fender well gap while maintaining superior ride comfort through a progressive spring rate design. This lowered height also reduces wind resistance for improved aerodynamics.

Manufactured in Germany, these springs are crafted from high-tensile 54SiCr6 spring steel. Every spring is shot-peened to significantly extend service life and block-set to ensure the material remains resilient without sagging over time. This makes them an ideal upgrade for drivers seeking a balance of sportier dynamics and daily-driver usability.

• Lowers vehicle center of gravity for improved handling and cornering
• Progressive spring rate design for superb ride quality
• Manufactured from 54SiCr6 spring steel for strength and resilience
• Shot-peened and block-set for long-term durability
• Direct replacement for factory springs on Audi B8 platform
• Manufacturer Part Number: 29061-2

Fits 2008-2017 Audi A5, A5 Quattro, and S5 (B8) models including Cabriolet and Quattro submodels.

Designed for enthusiasts who want a subtle improvement in handling without sacrificing ride quality, H&R OE Sport Springs provide a refined alternative to aggressive lowering kits. These springs are engineered to reduce body roll and improve steering response while maintaining factory-like comfort levels. By utilizing a progressive spring rate, these coils remain compliant during daily driving but firm up under load for better cornering control.

Precision-manufactured in Germany, these springs are crafted from high-tensile 54SiCr6 spring steel to ensure long-term durability and resistance to sagging. Every spring is shot-peened to increase service life and block-set to its final height, ensuring consistent performance right out of the box. These are a direct replacement for factory springs and are compatible with OE-style dampers.

• Manufacturer Part Number: 29061-1
• Material: High-strength 54SiCr6 spring steel
• Finish: Shot-peened for maximum durability
• Design: Progressive spring rate for balanced handling and comfort
• Manufacturing: Made in Germany
• Fitment: Specifically engineered for the B8 Audi chassis

H&R Sport Springs are engineered to enhance your vehicle's handling and aesthetics by reducing fender well gap and lowering the center of gravity. Designed with a progressive spring rate, these springs provide a balance between performance-oriented handling and street-friendly ride quality. The lowered profile reduces wind resistance for improved aerodynamics while significantly minimizing body roll during spirited driving.

• Manufacturer Part Number: 29059-2
• Material: High-tensile 54SiCr6 spring steel
• Construction: Shot-peened and block-set for increased service life
• Design: Progressive spring rate for superior ride comfort and resilience
• Origin: Precision-made in Germany

Fits select 2008-2017 Audi A5, A5 Quattro, and S5 models (B8 chassis).

H&R Sport Springs are a premier suspension upgrade designed to lower your vehicle's center of gravity and reduce the fender well gap for a sleek, aggressive appearance. By reducing body roll and improving steering response, these springs provide significantly better handling performance without sacrificing ride comfort. Each spring is engineered with a progressive rate to ensure superb ride quality during daily driving while stiffening under load for improved control.

• High-Performance Material: Crafted from 54SiCr6 spring steel for maximum strength, lightweight performance, and resilience.
• Precision Engineered: Each spring is shot-peened for a 200% increase in service life and block-set to prevent sagging over time.
• Improved Aerodynamics: A lower ride height reduces wind resistance for better streamlining and potential fuel efficiency gains.
• Made in Germany: 100% German-made to exacting quality standards.

Technical Specifications:

• Manufacturer Part Number: 29059-1
• Material: 54SiCr6 Spring Steel
• Spring Design: Progressive Rate
• Construction: Shot-peened and Block-set

Vehicle Fitment:

Fits select 2008-2015 Audi R8 models, including Base, GT, Plus, and Spyder (V8 and V10 engines).

H&R Sport Springs are engineered to enhance the handling and aesthetics of your Audi R8. By lowering the vehicle's center of gravity and utilizing a progressive spring rate, these springs significantly reduce body roll and fender well gap while maintaining superb ride quality and comfort. The streamlined profile also contributes to reduced wind resistance at speed.

Manufactured in Germany, each spring is crafted from high-tensile 54SiCr6 spring steel. Every unit is shot-peened to increase service life and block-set to ensure it never sags, providing a consistent ride height and performance over time.

• Manufacturer Part Number: 29058-1
• Material: 54SiCr6 high-tensile spring steel
• Finish: Shot-peened for durability
• Design: Progressive spring rate for optimal balance of comfort and performance
• Manufacturing: Block-set to prevent sagging
• Origin: Made in Germany

Fits 2005-2010 Jeep Grand Cherokee and 2006-2010 Jeep Commander.

H&R Sport Springs are the premier upgrade for owners looking to enhance both the aesthetics and handling of their Jeep. By lowering the vehicle's center of gravity, these springs significantly reduce body roll and nose dive, resulting in a more planted and responsive driving experience. The progressive spring rate design ensures that while the suspension is firmer under load, it maintains a comfortable ride quality for daily use.

Crafted in Germany, these springs are manufactured from high-tensile 54SiCr6 spring steel. Every spring is shot-peened to extend service life by over 200% and precision block-set to ensure the ride height remains consistent without sagging. These Sport Springs provide a more streamlined profile, reducing wind resistance and tightening up the factory fender well gap.

• Lowered center of gravity for improved handling and stability
• Progressive spring design for a balance of comfort and performance
• Constructed from lightweight, high-tensile 54SiCr6 spring steel
• Shot-peened for maximum durability and fatigue resistance
• Precision block-set to prevent sagging over time
• Compatible with OE and aftermarket performance dampers
• Manufactured in Germany
• Manufacturer Part Number: 29056-1

Fits 2012-2019 Fiat 500 Abarth and 2013-2014 Fiat 500 Abarth Cabrio models.

H&R Sport Springs are engineered to deliver improved handling and a lower stance without sacrificing daily drivability. By lowering the vehicle's center of gravity, these springs reduce body roll and minimize fender well gap for a more aggressive profile and better cornering performance. The progressive spring rate design ensures excellent ride quality under normal conditions while providing the necessary stiffness during spirited driving.

Every H&R Sport Spring is manufactured in Germany using high-tensile 54SiCr6 spring steel. To ensure long-term durability and performance consistency, each spring is shot-peened to increase service life and block-set to prevent sagging over time.

• Reduced center of gravity for enhanced handling and stability
• High-tensile 54SiCr6 spring steel construction
• Shot-peened and block-set for maximum durability
• Progressive spring rate for a balanced ride and performance
• Engineered and manufactured in Germany
• Manufacturer Part Number: 29054-6

Fits select 2012-2019 Fiat 500 and 500c models, including Pop, Lounge, Sport, Turbo, Abarth, and 500e.

H&R Sport Springs are the ideal upgrade for Fiat 500 owners looking to enhance both vehicle aesthetics and handling performance. By lowering the center of gravity and reducing the factory fender well gap, these springs provide a more aggressive stance and improved aerodynamics. The progressive spring rate design is specifically engineered to reduce body roll during cornering while maintaining a high level of ride comfort for daily use.

• Manufactured from high-tensile 54SiCr6 spring steel for strength and resilience
• Shot-peened and block-set to ensure a long service life without sagging
• Progressive spring design provides superb ride quality and responsive handling
• Reduces wind resistance for improved streamlining
• Lightweight construction reduces unsprung weight
• Made in Germany
• Manufacturer Part Number: 29054-4

Fits 2008-2013 BMW M3 Base.

H&R Sport Springs are engineered to enhance your vehicle's handling and appearance by reducing the fender well gap and lowering the center of gravity. This reduction in ride height minimizes body roll during cornering and improves aerodynamic stability for a more streamlined profile. Each spring is crafted from high-tensile 54SiCr6 spring steel to ensure durability and long-term resilience without compromising the superb ride quality BMW owners expect.

• Manufactured from 54SiCr6 spring steel for maximum strength and reduced weight
• Shot-peened for increased service life and fatigue resistance
• Progressive spring rate design balances performance handling with ride comfort
• Fully block set to prevent sagging or settling over time
• Made in Germany
• Manufacturer Part Number: 29053-2

Fits 2008-2013 BMW M3 Base.

H&R Sport Springs are the premier choice for drivers looking to enhance both the performance and aesthetics of their vehicle. These springs lower the center of gravity and significantly reduce body roll, resulting in sharper handling and more responsive steering. By minimizing the fender well gap, H&R Sport Springs provide a more aggressive, performance-oriented profile without sacrificing daily ride comfort, thanks to a precision-engineered progressive spring rate.

• Manufactured from high-tensile 54SiCr6 spring steel for lightweight strength
• Shot-peened for increased service life and durability
• Precision block-set to ensure the springs never sag or lose ride height
• Reduces wind resistance for a more streamlined aerodynamic profile
• Designed and manufactured in Germany
• Manufacturer Part Number: 29053-1

Fits 2010-2015 Mercedes-Benz E63 AMG (Base and 4Matic).

H&R Sport Springs are engineered to deliver a lower center of gravity and reduced body roll for sharper handling without sacrificing ride quality. By reducing the factory fender well gap, these springs provide your W212 E63 AMG with a more aggressive stance and improved aerodynamics. Each spring is crafted from high-tensile 54SiCr6 spring steel and is shot-peened to increase service life and resist fatigue.

The progressive spring rate design ensures a comfortable ride during daily driving while becoming firmer under load for improved cornering performance. These springs are block-set to their solid length during manufacturing, ensuring they will never sag or lose their specified ride height over time.

• Precision-wound from lightweight 54SiCr6 spring steel
• Shot-peened for maximum durability and resilience
• Progressive spring rate for balanced comfort and performance
• Reduces body roll and improves vehicle aerodynamics
• Made in Germany
• Manufacturer Part Number: 29028-2

Fits 2008-2014 Mercedes-Benz C63 AMG Base and 2012 Black Series models.

H&R Sport Springs are designed to enhance your vehicle's handling and aesthetics by lowering the center of gravity and reducing body roll. These springs provide a more aggressive stance by minimizing the fender well gap, resulting in a streamlined profile with lower wind resistance. Engineered for daily drivability, the progressive spring rate design ensures a refined ride quality while maintaining the performance expected from a high-output chassis like the W204.

• Precision crafted from high-tensile 54SiCr6 spring steel
• Shot peened and block set for maximum durability and resilience
• Progressive spring rate design for a balance of comfort and performance
• Reduces body roll and improves cornering stability
• Lightweight construction to reduce unsprung weight
• Manufactured in Germany
• Manufacturer Part Number: 29028-1

Fits 2008-2015 Mitsubishi Lancer Evolution (GSR, MR, MR Touring, and SE).

H&R Sport Springs are the premier suspension upgrade for Mitsubishi Evo X owners looking to enhance both performance and aesthetics. By lowering the vehicle's center of gravity and reducing body roll, these springs provide sharper handling and a more aggressive stance without sacrificing ride quality. The progressive spring rate design ensures a comfortable ride during daily commutes while stiffening under load for better cornering performance.

Each spring is precision-engineered in Germany from high-tensile 54SiCr6 spring steel. The manufacturing process includes shot peening to significantly increase service life and a "block set" procedure to ensure the springs never sag or lose their intended ride height. This kit is a direct replacement for factory springs and is designed to work with your original equipment dampers.

• Manufacturer Part Number: 29009-1
• Material: 54SiCr6 Spring Steel
• Finish: Shot-peened for durability
• Design: Progressive spring rate for balanced comfort and performance
• Benefits: Lower center of gravity and reduced wind resistance
• Origin: Made in Germany

Fits 2010-2015 Mercedes-Benz GLK350 4Matic (X204).

H&R Sport Springs are designed to improve the handling and stance of your Mercedes-Benz without sacrificing ride quality. By lowering the vehicle's center of gravity, these springs reduce body roll during cornering and minimize the fender well gap for a more aggressive, streamlined appearance. The progressive spring rate design ensures a comfortable ride during normal driving while providing the stiffness needed for spirited performance.

Every H&R Sport Spring is manufactured in Germany using 54SiCr6 spring steel to ensure high tensile strength and durability. These springs are shot peened to increase service life and block set to their final height, preventing sagging over time. Installing these springs also helps reduce wind resistance, which can lead to improved fuel efficiency.

• Manufacturer Part Number: 29005-2
• Material: High-strength 54SiCr6 spring steel
• Manufacturing: Shot peened and block set for longevity
• Design: Progressive spring rate for performance and comfort
• Origin: Made in Germany

Fits 2011-2014 Honda CR-Z (Base and EX).

H&R Sport Springs are designed to deliver a lower center of gravity and improved handling for the Honda CR-Z. By reducing the factory fender well gap, these springs provide a more aggressive stance while decreasing body roll for better cornering performance. The progressive spring rate design ensures that ride quality remains excellent for daily driving, providing comfort during normal cruising and increased support under load.

Every H&R Sport Spring is manufactured in Germany using high-tensile 54SiCr6 spring steel. To ensure long-term durability and prevent sagging, each spring is shot-peened and block set before leaving the factory. This precision manufacturing process results in a lightweight, resilient spring that withstands the rigors of performance driving.

• Manufacturer Part Number: 29003-2
• Material: 54SiCr6 high-tensile spring steel
• Design: Progressive rate for balanced comfort and performance
• Manufacturing: Shot-peened and block set for increased service life
• Lowering: Reduces center of gravity and wind resistance
• Origin: Made in Germany

Fits 2014-2017 Audi SQ5 Premium Plus and Prestige models (8R chassis).

H&R Sport Springs are the premier choice for Audi enthusiasts looking to enhance both vehicle aesthetics and handling performance. By lowering the vehicle's center of gravity, these springs reduce body roll and minimize fender well gap for a more aggressive, streamlined profile. The progressive spring rate design ensures that while handling is sharpened, the SQ5 maintains a superb ride quality suitable for daily driving.

Engineered and manufactured in Germany, these springs are crafted from high-tensile 54SiCr6 spring steel. Each spring is shot-peened to increase service life and block-set to ensure they never sag over time. This kit is designed to work with factory dampers while providing a more responsive feel behind the wheel.

• Manufacturer Part Number: 29001-3
• Material: 54SiCr6 Spring Steel
• Manufacturing: Shot-peened and block-set for durability
• Design: Progressive spring rate for comfort and performance
• Origin: Made in Germany

Fits 2009-2017 Audi Q5 Premium Plus and Prestige models (TDI Only).

H&R Sport Springs are engineered to improve the handling and appearance of your Audi Q5 by lowering the center of gravity and reducing the fender well gap. By decreasing body roll and improving stability, these springs offer a more connected driving experience without compromising ride comfort. The progressive spring rate design ensures a smooth ride during normal cruising while providing the necessary stiffness during spirited cornering.

Crafted in Germany, these springs are manufactured from high-tensile 54SiCr6 spring steel. To ensure maximum durability and resistance to sagging, every spring is shot-peened and block-set. This rigorous manufacturing process results in a lightweight, resilient component that provides consistent performance over the life of the vehicle.

• Reduces vehicle center of gravity for enhanced handling and aesthetics
• Progressive spring rate design maintains superb ride quality
• Constructed from high-strength 54SiCr6 spring steel
• Shot-peened and block-set for long-term resilience and strength
• Origin: Made in Germany
• Manufacturer Part Number: 29001-2

Fits 2009-2017 Audi Q5 Premium, Premium Plus, and Prestige models (AWD, Non-TDI).

H&R Sport Springs are engineered to deliver a lower center of gravity and improved handling characteristics for the Audi Q5 8R chassis. By reducing the fender well gap, these springs provide a more aggressive stance while significantly reducing body roll for flatter cornering. The progressive spring rate design ensures that while handling is sharpened, the vehicle maintains superb ride quality and comfort for daily driving.

Every H&R spring is precision-crafted in Germany using high-tensile 54SiCr6 spring steel. To ensure long-term performance and reliability, the springs are shot-peened to increase fatigue life and block-set to their solid length to prevent future sagging or settling. This meticulous manufacturing process results in a lightweight, resilient suspension component that optimizes both aesthetics and aerodynamics.

• Manufacturer Part Number: 29001-1
• Material: High-tensile 54SiCr6 spring steel
• Design: Progressive spring rate for optimal balance of comfort and performance
• Manufacturing: Shot-peened and block-set for maximum durability and sag-resistance
• Origin: Made in Germany

Fits 2010-2015 BMW 740Li xDrive, 750Li xDrive, and 760Li (F02) models equipped with factory self-leveling suspension.

H&R Sport Springs are engineered to deliver improved handling and a refined aesthetic by reducing the factory fender well gap. These springs lower the vehicle's center of gravity and utilize a progressive spring rate design to reduce body roll during cornering while maintaining superb ride quality and comfort. Every spring is manufactured in Germany from high-tensile 54SiCr6 spring steel, ensuring long-term resilience and performance for the life of your vehicle.

• Construction: High-tensile 54SiCr6 spring steel for strength and weight reduction
• Processing: Shot peened and block set for increased durability
• Design: Progressive spring rate provides a comfortable ride under normal conditions and firm support when pushed
• Chassis Compatibility: BMW F02 (long wheelbase)
• Manufacturing: Made in Germany
• Manufacturer Part Number: 28999-6

Fits 2009-2015 BMW 750Li Base and ActiveHybrid models (F02) equipped with self-leveling suspension.

H&R Sport Springs are engineered to deliver a lower center of gravity and reduced body roll, providing sharper handling and a more aggressive stance by reducing the factory fender well gap. These springs utilize a progressive rate design, ensuring that daily driving comfort is maintained while increasing performance during spirited maneuvers. The reduced wind resistance from a lower ride height also contributes to improved vehicle aerodynamics.

Built for durability and precision, these springs are manufactured in Germany using high-tensile 54SiCr6 spring steel. Each component is shot-peened to increase service life and block-set to prevent sagging over time. This kit is designed to work specifically with the BMW F02 chassis and its integrated self-leveling systems.

• Material: High-tensile 54SiCr6 spring steel
• Manufacturing: Shot-peened and block-set for longevity
• Design: Progressive spring rate for superb ride quality
• Origin: Made in Germany
• MPN: 28999-5