Fits 2017-2020 Mazda CX-5 4WD models (Sport, Touring, Grand Touring, Signature).

H&R Sport Springs are the premier upgrade for drivers looking to enhance both the aesthetics and handling of their vehicle. By lowering the center of gravity and reducing the fender well gap, these springs deliver a more aggressive stance and significantly improved cornering stability. The progressive spring rate design ensures a comfortable ride during normal cruising while providing the necessary stiffness to reduce body roll during spirited driving.

Each spring is precision-engineered and manufactured in Germany using high-tensile 54SiCr6 spring steel. To ensure long-lasting performance and resilience, the springs are shot-peened and block-set to prevent sagging over time. This lightweight yet strong construction also contributes to improved aerodynamics and fuel efficiency by reducing wind resistance.

• Lowers center of gravity for improved handling and reduced body roll
• Progressive spring rate design for superb ride quality
• Constructed from high-tensile 54SiCr6 spring steel
• Shot-peened and block-set for maximum durability
• Made in Germany
• Manufacturer Part Number: 28875-3

Fits 2013-2016 Mazda CX-5 Grand Touring, Sport, and Touring models (2WD/AWD).

H&R Sport Springs are engineered to enhance both the handling and the aesthetic of your vehicle. By lowering the center of gravity and reducing the fender well gap, these springs significantly decrease body roll for flatter, more precise cornering. The progressive spring rate design ensures that your Mazda maintains superb ride quality for daily driving while providing increased stability and a more streamlined profile.

Each spring is manufactured in Germany from high-tensile 54SiCr6 spring steel. To ensure maximum durability and resilience, these springs are shot-peened to extend service life and block-set to prevent sagging. This lightweight and strong suspension upgrade provides a functional performance boost and a more aggressive stance without compromising comfort.

• Manufacturer Part Number: 28875-1
• Material: High-tensile 54SiCr6 spring steel
• Construction: Shot-peened and block-set for long-term durability
• Design: Progressive rate for balanced performance and comfort
• Origin: Made in Germany

Fits 2012-2020 Porsche Boxster and Cayman models, including 718 and 981 generations (Base, S, GTS, GT4, and Spyder).

H&R Sport Springs are engineered to deliver improved handling and a lower ride height while maintaining excellent ride comfort. By lowering the vehicle's center of gravity, these springs reduce body roll and minimize the fender well gap for a more aggressive, functional stance. Each spring is crafted from high-tensile 54SiCr6 spring steel and undergoes a shot-peening process to increase service life and resistance to fatigue.

The progressive spring rate design ensures that the suspension remains supple during normal driving but firms up under load for better cornering performance. These springs are "block set," meaning they are pre-compressed to their solid length during manufacturing to ensure they will not sag or lose ride height over time. Compatible with Porsche Active Suspension Management (PASM) systems.

• Precision-wound from lightweight, high-strength 54SiCr6 spring steel
• Progressive spring rate design for superb ride quality and handling
• Shot-peened for increased durability and longevity
• Reduced body roll and improved aerodynamic profile
• Fully compatible with PASM-equipped models
• Made in Germany
• Manufacturer Part Number: 28865-1

Fits select 2015-2020 Audi A3 (Premium, Premium Plus, Prestige, TDI, and Titanium) 2WD models.

H&R Sport Springs are engineered to enhance your vehicle's handling while providing an aggressive stance by reducing the fender well gap. By lowering the center of gravity, these springs minimize body roll during cornering and improve overall stability. Each spring features a progressive rate design, ensuring that ride quality remains comfortable for daily driving while offering increased firmness during spirited maneuvers.

Precision-manufactured in Germany, these springs are crafted from high-tensile 54SiCr6 spring steel. To ensure long-term durability and performance, every spring is shot-peened and block-set to prevent sagging and maintain its intended ride height for the life of the vehicle.

• Lowered center of gravity for improved cornering performance
• Progressive spring rate design maintains superb ride comfort and quality
• Constructed from lightweight, high-strength 54SiCr6 spring steel
• Shot-peened and block-set for maximum resilience and longevity
• Manufacturer Part Number: 28860-4
• Made in Germany

Fits 2015-2020 Audi A3 Sedan (2WD) models, including Premium, Premium Plus, Prestige, TDI, and Titanium trims.

H&R Super Sport Springs are engineered for the seasoned enthusiast who demands a more aggressive performance stance and enhanced handling without sacrificing ride quality. By lowering the vehicle's center of gravity, these springs reduce body roll and improve cornering stability. Each spring features a high-tech progressive rate design that maintains superior ride comfort during daily driving while providing increased firmness when pushed.

Manufactured in Germany, these springs are crafted from high-tensile 54SiCr6 spring steel. To ensure long-term durability and performance, every spring is shot-peened to increase service life and block-set to its solid height to prevent future sagging or settling. This results in a lightweight, resilient suspension component that delivers consistent ride height and handling characteristics.

• Progressive spring rate design for a balance of comfort and performance
• Lower center of gravity for improved handling and reduced body roll
• Constructed from high-tensile 54SiCr6 spring steel
• Shot-peened and block-set for maximum durability and sag resistance
• Precision manufactured in Germany
• Manufacturer Part Number: 28859-4

Fits 2015-2020 Mercedes-Benz CLA45 AMG 4Matic models.

H&R Sport Springs are engineered to enhance your vehicle's handling and aesthetics without sacrificing ride quality. By lowering the center of gravity and reducing the fender well gap, these springs minimize body roll and provide a more planted, responsive feel through every corner. The progressive spring rate design ensures a comfortable ride during daily driving while stiffening up under load for improved performance.

Crafted in Germany from high-tensile 54SiCr6 spring steel, each spring is shot-peened and block-set to increase service life and prevent sagging. This lightweight yet resilient construction improves aerodynamics by reducing wind resistance, making your Mercedes-Benz more streamlined at highway speeds.

• Material: Proprietary 54SiCr6 Spring Steel
• Design: Progressive rate for superb ride quality and handling
• Manufacturing: Shot-peened and block-set for durability
• Origin: Made in Germany
• MPN: 28858-3

Fits 2015-2019 Volkswagen e-Golf (Limited Edition, SE, and SEL Premium).

H&R Sport Springs are the premier upgrade for Volkswagen e-Golf owners looking to improve handling and aesthetics. By lowering the vehicle's center of gravity, these springs reduce body roll and minimize fender well gap for a more aggressive, streamlined profile. The lower wind resistance signature also improves aerodynamic efficiency. Engineered with a progressive spring rate, this kit delivers sharper steering response and improved stability without compromising the daily ride quality expected from the MK7 chassis.

Every H&R spring is 100% made in Germany using high-tensile 54SiCr6 spring steel. To ensure long-term reliability and performance, these springs are shot-peened to increase service life by over 200% and are block-set so they will never sag or lose their original ride height.

• Manufactured from high-tensile 54SiCr6 spring steel
• Shot-peened and block-set for maximum durability and fatigue resistance
• Progressive spring design maintains superb ride comfort
• Reduces body roll and improves cornering stability
• Engineered and manufactured in Germany
• Manufacturer Part Number: 28843-11

Fits 2015-2019 Volkswagen Golf SportWagen S, SE, SEL, TDI, and Limited Edition models (1.8T).

H&R Super Sport Springs are engineered for the seasoned enthusiast seeking a more aggressive stance and improved handling without compromising ride quality. These high-tech progressive springs lower the vehicle's center of gravity to reduce body roll and sharpen steering response. Unlike generic lowering springs, H&R Super Sport Springs are designed to work with factory dampers, including those equipped with Dynamic Chassis Control (DCC).

• Manufactured from high-tensile 54SiCr6 spring steel for strength and resilience
• Shot-peened and block-set to prevent sagging and ensure a consistent ride height
• Progressive spring rate design provides a comfortable ride during cruising and firm support under cornering loads
• Compatible with factory DCC (Dynamic Chassis Control) systems
• Lightweight construction reduces unsprung weight
• Made in Germany
• Manufacturer Part Number: 28840-4

Fits 2014-2019 BMW M6 Gran Coupe Base models.

H&R Sport Springs are the premier suspension upgrade for BMW M6 Gran Coupe owners looking to improve both vehicle aesthetics and handling dynamics. These springs lower the F06 chassis center of gravity, significantly reducing body roll during cornering and eliminating excessive fender well gap for a more aggressive stance. Engineered with a progressive spring rate, they deliver a firm, sporty feel without sacrificing the refined ride quality expected of a grand tourer.

• Precision Materials: Manufactured from high-tensile 54SiCr6 spring steel for maximum strength and resilience.
• Durability: Each spring is shot-peened and block-set to increase service life and prevent sagging over time.
• Ride Quality: Progressive rate design maintains superb comfort during daily driving while stiffening under load for performance.
• Improved Aerodynamics: Reducing ride height lowers wind resistance for better high-speed stability.
• German Engineering: Designed and manufactured in Germany to exacting standards.
• MPN: 28837-2

Fits 2013-2018 BMW M6 Base models.

H&R Sport Springs are the ideal solution for drivers looking to enhance their vehicle's handling and aesthetics without sacrificing ride quality. These springs lower the BMW M6's center of gravity, effectively reducing body roll and minimizing the unsightly fender well gap. The progressive spring rate design ensures the vehicle remains comfortable during daily commutes while providing the stiffness needed for spirited driving. Additionally, the lowered stance reduces wind resistance, creating a more streamlined profile for improved aerodynamics.

• Precision-crafted from high-tensile 54SiCr6 spring steel for maximum strength and resiliency.
• Shot-peened to extend service life and improve fatigue resistance.
• Block-set to ensure the springs maintain their height and prevent sagging over time.
• Progressive spring design delivers superb ride quality under normal conditions and improved control during cornering.
• Lightweight construction reduces unsprung weight.
• Engineered and manufactured in Germany.
• Manufacturer Part Number: 28837-1

Fits select 2013-2020 BMW 328d, 328i, 330i, 335i, and 340i xDrive and Gran Turismo models.

H&R Sport Springs are the premier choice for enthusiasts looking to enhance their vehicle's handling and aesthetics. By lowering the center of gravity, these springs significantly reduce body roll and improve stability through corners. The progressive spring rate design ensures that while the stance is more aggressive and the fender well gap is reduced, the ride remains comfortable for daily use. A lower wind resistance profile also improves the vehicle's aerodynamic efficiency.

• Material: High-tensile 54SiCr6 spring steel for strength and resilience
• Manufacturing: Shot-peened and block-set for increased service life
• Performance: Progressive spring rate design for superb ride quality
• Build: Lightweight construction to reduce unsprung weight
• Origin: Made in Germany
• Part Number: 28832-2

Vehicle Fitment:

• 2014-2018 BMW 328d xDrive Base
• 2014-2016 BMW 328i GT xDrive Base
• 2013-2016 BMW 328i xDrive Base
• 2017-2019 BMW 330i GT xDrive Base
• 2017-2020 BMW 330i xDrive Base
• 2014-2016 BMW 335i GT xDrive Base
• 2017-2019 BMW 340i GT xDrive Base

Fits select 2013-2020 BMW 3 Series and 4 Series xDrive models (320i, 328d/i, 335i, 340i, 428i, 430i, 435i, and 440i).

H&R Sport Springs are engineered to deliver a lower center of gravity and improved handling while maintaining excellent ride comfort. By reducing the fender well gap, these springs give your BMW a more aggressive stance and a more streamlined profile, which can also help reduce wind resistance. Each spring is crafted from high-tensile 54SiCr6 spring steel and undergoes a rigorous shot-peening and block-setting process to ensure durability and prevent sagging over time.

The progressive spring rate design ensures that your vehicle remains comfortable during daily driving while tightening up during spirited cornering to reduce body roll. As H&R's most popular suspension upgrade, these springs are an ideal choice for drivers looking to enhance both performance and aesthetics without compromising the refined feel of their xDrive-equipped BMW.

• Manufacturer Part Number: 28832-1
• Material: 54SiCr6 Spring Steel
• Design: Progressive spring rate for superb ride quality
• Manufacturing: Shot-peened and block-set for long-term resilience
• Origin: Made in Germany

Fits 2014-2018 Audi RS7 Base and Performance models (4G chassis) without factory air suspension.

H&R Sport Springs are the ideal solution for Audi RS7 owners looking to improve handling and aesthetics without sacrificing ride quality. By lowering the vehicle's center of gravity and reducing the fender well gap, these springs minimize body roll and improve responsiveness during cornering. The progressive spring rate design ensures that the vehicle remains comfortable for daily driving while providing increased support under heavy loads.

Every H&R Sport Spring is precision-engineered and manufactured in Germany using high-tensile 54SiCr6 spring steel. To ensure maximum durability and consistent ride height, each spring is shot-peened to increase service life and block-set to prevent sagging over time.

• Manufacturer Part Number: 28828-1
• Material: 54SiCr6 Spring Steel
• Manufacturing Process: Shot-peened and block-set for longevity
• Spring Design: Progressive rate for optimal comfort and control
• Fitment: Specifically for RS7 models without Air Suspension
• Origin: Made in Germany

Fits 2015-2020 Jaguar F-Type R models (Coupe and Convertible, 2WD and AWD).

H&R Sport Springs are the premier suspension upgrade for Jaguar F-Type R owners looking to improve both vehicle aesthetics and handling dynamics. These springs lower the center of gravity to reduce body roll and minimize the unsightly fender well gap, resulting in a more streamlined profile and better cornering stability. Despite the lower ride height, the progressive spring rate design ensures that factory ride quality and comfort are preserved for daily driving.

• Manufactured from high-tensile 54SiCr6 spring steel for strength and resilience
• Shot-peened for maximum longevity and a 200% increase in service life
• Block set to prevent sagging or settling over time
• Precision-engineered for compatibility with original equipment dampers
• Lightweight design to reduce unsprung weight
• Made in Germany
• Manufacturer Part Number: 28822-2

Fits 2014-2020 Jaguar F-Type models, including Base, S, V8 S, R, SVR, and special editions (2WD and AWD).

H&R Sport Springs are engineered to enhance the handling and aesthetics of your Jaguar F-Type. By lowering the vehicle's center of gravity and reducing the factory fender well gap, these springs deliver a more aggressive stance while significantly reducing body roll during cornering. The progressive spring rate design is meticulously calibrated to provide superior ride quality, ensuring the vehicle remains comfortable for daily driving while offering increased stability at higher speeds.

Constructed from high-tensile 54SiCr6 spring steel, these springs are shot-peened to increase service life and block-set to prevent sagging over time. The lightweight, resilient design also improves the vehicle's aerodynamic profile, potentially increasing fuel efficiency by reducing wind resistance.

• Manufacturer Part Number: 28822-1
• Material: 54SiCr6 Spring Steel
• Finish: Shot-peened for durability
• Design: Progressive rate for optimal ride/handling balance
• Origin: Precision-made in Germany
• Compatibility: Replaces factory springs on both Coupe and Convertible models

Fits 2014-2020 BMW X5 and 2014-2019 BMW X6 (xDrive50i models without self-leveling).

H&R Sport Springs are engineered to enhance your BMW's handling while providing a more aggressive stance. By lowering the vehicle's center of gravity, these springs significantly reduce body roll and fender well gap, resulting in more precise cornering and improved aerodynamics. Each spring is designed with a progressive rate to maintain superb ride quality and daily-driving comfort while increasing performance under load.

Manufactured in Germany, these springs are crafted from high-tensile 54SiCr6 spring steel. Every unit undergoes a shot-peening process to increase service life and is block set to ensure it never sags or loses its original height over time. This kit is a direct replacement for factory springs on vehicles without self-leveling suspension or air ride systems.

• Lowers center of gravity for improved handling and reduced body roll
• Progressive spring rate design for a balance of comfort and performance
• Manufactured from lightweight, high-tensile 54SiCr6 spring steel
• Shot-peened and block set for maximum durability and resistance to sagging
• Fits AWD xDrive50i models without self-leveling systems
• Made in Germany
• Manufacturer Part Number: 28817-4

Fits 2014-2018 BMW X5 (F15) xDrive35d and xDrive35i models without self-leveling suspension.

H&R Sport Springs are engineered to enhance the handling and aesthetics of your BMW by reducing the fender well gap and lowering the center of gravity. This reduction in ride height limits body roll during cornering and creates a more streamlined aerodynamic profile. Every spring is manufactured in Germany using high-tensile 54SiCr6 spring steel to ensure long-term durability and resistance to sagging.

The progressive spring rate design is tuned specifically for the F15 chassis, maintaining OE-level ride quality during normal driving while providing increased firmness when the suspension is compressed. To ensure consistent performance, these springs are shot-peened to increase service life by over 200% and are block-set to their solid height so they will not settle after installation.

• Manufacturer Part Number: 28817-3
• Material: 54SiCr6 Spring Steel
• Design: Progressive spring rate for superior ride quality
• Construction: Shot-peened and block-set for maximum durability
• Compatibility: For xDrive models without self-leveling suspension
• Origin: Made in Germany

Fits select 2014-2020 BMW X5 and X6 (xDrive35i, xDrive50i, and M).

H&R Sport Springs (MPN: 28817-2) are engineered to improve handling and vehicle aesthetics by lowering the center of gravity and reducing the factory fender well gap. By utilizing a progressive spring rate design, these springs maintain superb ride quality and comfort while reducing body roll and nose dive under braking. The lower profile also reduces wind resistance for a more streamlined aerodynamic signature.

• Manufactured from high-tensile 54SiCr6 spring steel for strength and resilience
• Shot-peened for significantly increased service life
• Block set to ensure the springs never sag or lose height
• Progressive spring design for an optimal balance of performance and comfort
• Lightweight construction reduces unsprung weight
• Made in Germany

Fits select 2014-2019 BMW X5 and X6 models (xDrive35d / xDrive35i) equipped with rear self-leveling suspension.

H&R Sport Springs are engineered to deliver a lower center of gravity and reduced body roll for significantly improved handling dynamics on the BMW F15 and F16 chassis. By reducing the factory fender well gap, these springs provide a more aggressive stance without sacrificing the daily-driver comfort expected of a premium SUV. The progressive spring rate design ensures the ride remains compliant during normal cruising but firms up under load for better cornering performance and stability.

Constructed from high-tensile 54SiCr6 spring steel, every H&R spring is shot-peened to increase service life and is "block set" to its solid length to ensure it will never sag or lose its ride height. These lightweight, resilient springs are manufactured in Germany to exacting tolerances for a perfect fit and long-term durability.

• Lowers vehicle center of gravity for enhanced stability and aesthetics
• Progressive spring rate maintains superb ride quality and comfort
• Manufactured from 54SiCr6 spring steel for maximum strength
• Shot-peened and block-set to prevent sagging over time
• Specifically designed for xDrive models with rear self-leveling systems
• Manufacturer Part Number: 28817-1
• Made in Germany

Fits 2015-2019 Volkswagen Golf R Base (2.0T).

H&R Sport Springs are the ideal solution for Volkswagen Golf R MK7 owners looking to improve handling performance and reduce fender well gap. By lowering the vehicle's center of gravity, these springs significantly reduce body roll during cornering and improve high-speed stability. This kit is specifically designed to work seamlessly with models equipped with Dynamic Chassis Control (DCC).

Every H&R spring is engineered with a progressive spring rate, which provides a comfortable ride during normal cruising while becoming firmer under load for superior control. Manufactured in Germany, these springs are crafted from high-tensile 54SiCr6 spring steel that has been shot-peened and block-set to ensure a long service life without sagging.

• Lowers center of gravity for improved handling and aesthetics
• Progressive spring rate design for excellent ride quality and performance
• Manufactured from high-tensile 54SiCr6 spring steel
• Shot-peened and block-set for maximum durability and resilience
• Fully compatible with factory DCC suspension systems
• Reduces wind resistance for improved aerodynamics
• Made in Germany
• Manufacturer Part Number: 28816-1

Fits 2014-2020 Nissan Rogue and Rogue Sport models (S, SL, SV, and Hybrid trims).

H&R Sport Springs are engineered to deliver a lower center of gravity and reduced body roll for sharper handling without sacrificing ride quality. These springs feature a progressive rate design, ensuring comfort during normal driving while providing firmer support under load. Each spring is manufactured in Germany from high-tensile 54SiCr6 spring steel and undergoes shot-peening and block-setting to ensure long-term durability and resistance to sagging.

• Reduced fender well gap for an improved, streamlined stance
• Constructed from lightweight, high-strength 54SiCr6 spring steel
• Shot-peened and block-set for maximum service life and resilience
• Progressive spring rate provides superb ride quality and handling performance
• Manufactured in Germany
• Manufacturer Part Number: 28814-4

Fits select 2014-2020 Mini Cooper, Cooper S, John Cooper Works, Clubman, Coupe, and Roadster models.

H&R Sport Springs (MPN: 28813-1) are the ideal solution for drivers looking to improve their Mini's handling while achieving a more aggressive stance. These springs lower the vehicle's center of gravity and reduce body roll for more precise cornering. Designed with a progressive spring rate, they provide a firm, sporty feel while maintaining the superb ride quality and comfort required for daily driving.

Every H&R Sport Spring is manufactured in Germany using high-tensile 54SiCr6 spring steel. To ensure long-term performance and durability, each spring is shot-peened to increase service life and "block set" to its solid height, ensuring the springs will never sag or lose their original ride height. Beyond aesthetics and handling, the reduced ride height also streamlines the vehicle for lower wind resistance.

• Lowers center of gravity for improved handling and reduced body roll
• Progressive spring rate design for excellent ride comfort
• Manufactured from high-strength 54SiCr6 spring steel
• Shot-peened for significantly increased service life
• Block set to prevent sagging or settling over time
• Precision crafted in Germany
• Manufacturer Part Number: 28813-1

Fits select 2015-2020 Mercedes-Benz C300, C43 AMG, and C450 AMG 4Matic (W205) models.

H&R Sport Springs are engineered to deliver a lower center of gravity and reduced body roll for sharper handling and a more aggressive stance. Designed specifically for the W205 4Matic chassis, these springs minimize fender well gap while maintaining excellent ride comfort. The progressive spring rate design ensures the vehicle remains composed during spirited driving without compromising the refinement expected of a Mercedes-Benz.

Every H&R spring is manufactured in Germany using high-tensile 54SiCr6 spring steel. To ensure long-term durability and performance, these springs are shot-peened to increase service life and block-set to prevent sagging. The result is a lightweight, resilient suspension upgrade that improves both aesthetics and aerodynamics.

• Manufactured from high-strength 54SiCr6 spring steel
• Shot-peened and block-set for maximum durability
• Progressive spring rate design for superior ride quality and handling
• Reduces center of gravity and aerodynamic wind resistance
• Engineered and manufactured in Germany
• Manufacturer Part Number: 28811-2

Fits 2015-2020 Mercedes-Benz C300 Base and 4Matic models.

H&R Sport Springs are engineered to enhance your vehicle's handling while providing an aggressive, refined stance. By lowering the center of gravity and reducing the fender well gap, these springs significantly minimize body roll during cornering and improve overall aerodynamic efficiency. The progressive spring rate design ensures a superb ride quality that balances performance with daily driving comfort.

Manufactured in Germany, these springs are crafted from high-tensile 54SiCr6 spring steel. Each component is shot-peened to increase service life and is "block set" to its solid length to ensure no sagging occurs over time. This kit replaces the factory springs with a lightweight, resilient alternative designed specifically for the W205 chassis.

• Manufacturer Part Number: 28811-1
• Material: 54SiCr6 high-tensile spring steel
• Construction: Shot-peened and block-set for durability
• Design: Progressive spring rate for optimal ride and handling
• Origin: Made in Germany

Fits 2015-2019 Mercedes-Benz GLA45 AMG 4Matic models.

H&R Sport Springs (MPN: 28809-3) are designed to enhance the handling and aesthetics of your GLA45 AMG. By lowering the vehicle's center of gravity and reducing the fender well gap, these springs provide a more aggressive stance while significantly reducing body roll during cornering. The progressive spring rate design ensures that while the handling is sharpened, the ride quality remains comfortable for daily driving.

Crafted in Germany, these springs are manufactured from high-tensile 54SiCr6 spring steel. Each unit is shot-peened to increase service life and block-set to ensure they never sag or lose their original ride height. This kit is a direct-fit replacement for the factory springs, offering a more streamlined profile and reduced wind resistance.

• Material: Proprietary 54SiCr6 Spring Steel
• Manufacturing: Shot-peened and block-set for durability
• Spring Rate: Progressive design for ride comfort and performance
• Origin: Made in Germany
• MPN: 28809-3

Fits 2016-2020 BMW M2 (F87) Base, Competition, and CS models, including those equipped with Adaptive M Suspension.

H&R Sport Springs are engineered to enhance the handling and stance of your BMW M2. By lowering the vehicle's center of gravity and reducing the fender well gap, these springs significantly minimize body roll during cornering without sacrificing daily drivability. Each spring is crafted from high-tensile 54SiCr6 spring steel and features a progressive rate design to ensure superb ride quality and comfort across various road surfaces. The reduced wind resistance signature also improves aerodynamic efficiency.

• Precision manufactured in Germany
• Constructed from 54SiCr6 spring steel for strength and resilience
• Shot peened and block set to increase service life and prevent sagging
• Progressive spring rate design maintains factory-like ride comfort
• Fully compatible with Adaptive M Suspension systems
• Lightweight and strong construction
• Manufacturer Part Number: 28802-5

Fits 2014-2020 BMW 428i xDrive, 430i, 430i xDrive, 435i xDrive, 440i, and 440i xDrive Base (F33 Cabrio).

H&R Sport Springs are engineered to improve handling and aesthetics by lowering the vehicle's center of gravity and reducing the fender well gap. These springs utilize a progressive spring rate design, providing a balance of superb ride quality and increased stability by reducing body roll during cornering. This streamlined profile also helps reduce wind resistance for improved aerodynamics.

Crafted in Germany, H&R springs are manufactured from high-tensile 54SiCr6 spring steel. To ensure long-lasting performance and resiliency, every spring is shot peened to increase service life and block set to prevent sagging over time. This kit is the ideal upgrade for drivers looking to enhance suspension response without sacrificing daily comfort.

• Manufacturer Part Number: 28802-4
• Material: High-tensile 54SiCr6 Spring Steel
• Construction: Shot peened and block set for maximum durability
• Rate: Progressive spring design for comfort and performance
• Origin: Made in Germany

Fits 2015-2020 BMW M4 (F83) Cabrio models, including those equipped with Adaptive M Suspension and the Competition Package.

H&R Sport Springs are engineered to enhance your vehicle's handling while providing a more aggressive stance by reducing the fender well gap. These springs lower the center of gravity and reduce body roll for improved cornering performance without sacrificing ride comfort. Each spring is crafted with a progressive rate design, ensuring superb ride quality during daily driving while firming up under load for better control.

• Manufactured from high-tensile 54SiCr6 spring steel for maximum strength and resilience
• Shot-peened to increase service life and fatigue resistance
• Precision block-set to prevent sagging over time
• Lower wind resistance signature for improved aerodynamics
• Engineered and manufactured in Germany
• Direct replacement for factory springs; compatible with OE damping systems

MPN: 28802-3

Fits 2015-2020 BMW M3 and M4 models (including F80 Sedan), compatible with Adaptive M Suspension and the Competition Package.

H&R Super Sport Springs are engineered for the seasoned enthusiast who requires a more aggressive stance than standard sport springs provide. These high-tech progressive springs significantly lower the vehicle's center of gravity to reduce body roll and improve cornering performance without sacrificing superior ride comfort. Each spring is manufactured in Germany from high-tensile 54SiCr6 spring steel, which is shot-peened and block-set for maximum longevity and resilience.

• Material: High-tensile 54SiCr6 spring steel
• Design: Progressive spring rate for daily-driven comfort and track-capable performance
• Construction: Shot-peened and block-set to prevent sagging and ensure durability
• Compatibility: Fully compatible with BMW Adaptive M Suspension and Competition Package
• Origin: Made in Germany
• Manufacturer Part Number: 28802-1

Fits 2014-2020 Maserati Ghibli Base, S, and S Q4 models (3.0L) equipped without the Skyhook suspension system.

H&R Sport Springs are engineered to deliver a lower center of gravity and reduced body roll, significantly sharpening handling dynamics while maintaining excellent ride comfort. These springs feature a progressive rate design, ensuring the vehicle remains composed during spirited driving without the harshness often associated with aftermarket suspension. By reducing the fender well gap, these springs provide a more aggressive, streamlined stance that also helps lower wind resistance at speed.

• Manufactured from high-tensile 54SiCr6 spring steel for maximum strength and resilience
• Shot-peened and block-set to increase service life and prevent sagging over time
• Progressive spring rate design for a balance of performance and daily-driver comfort
• Precision-engineered and manufactured in Germany
• Direct replacement for factory springs

• Manufacturer Part Number: 28801-1
• Application: Non-Skyhook models only
• Material: 54SiCr6 Spring Steel
• Country of Origin: Germany