Fits 2018-2025 Jeep Wrangler 2-Door models (including Rubicon, Sport, Sport S, Willys, and Willys Sport).

Rugged Ridge Spartan Nerf Bars are the ideal solution for Jeep owners who need reliable assistance climbing into a lifted vehicle without sacrificing off-road ground clearance. These bars feature a high-mount 3-inch OD primary tube that sits closer to the body than conventional tube steps for a streamlined look. Patented drop-down step hoops at each door provide firm, secure footing for easier cabin entry and exit.

Built for durability, these steps are constructed from heavy-duty .084 wall steel tubing. They are finished with a resilient 3-stage textured powder coat designed to withstand the rigors of trail use and resist corrosion. The integrated no-slide step pads provide consistent traction in all weather conditions.

• Manufacturer Part Number: 11596.03
• Primary Tube: 3-inch OD steel
• Material: .084 wall steel tubing
• Finish: 3-stage textured black powder coat
• Step Type: Patented drop-down hoops with no-slide pads
• Installation: Hardware and instructions included

Fits 2018-2025 Jeep Wrangler 4-Door (JL) models, including Sport, Sahara, Rubicon, Willys, and 4xe trims.

Rugged Ridge 3-inch round tube side steps provide a classic muscular look that stands up to the scale of oversized off-road tires. These steps are engineered from heavy-duty .07-inch wall thickness steel tubing, undergoing a dual-stage protection process with a corrosion-resistant E-coat and a textured black powder coat finish. Designed for a custom fit on your JL 4-Door, the high-strength mounting brackets bolt directly to the factory points for a flex-free installation. Each step rail includes UV-treated step pad inserts at both doors to ensure secure, slip-resistant entry and exit in all weather conditions.

• Tubing: 3-inch diameter steel with .07-inch wall thickness
• Finish: Dual-stage textured black powder coat over E-coating for rust resistance
• Weight Capacity: 300 lb. maximum limit per side
• Step Pads: UV-treated inserts for long-term durability and traction
• Hardware: Includes powder-coated steel brackets and all necessary installation hardware
• Manufacturer Part Number: 11591.12

Fits 2007-2018 Jeep Wrangler Unlimited JK models including Rubicon, Sahara, Sport, and X trims.

Rugged Ridge 3-inch round tube steps provide a stable point of entry and exit while adding classic off-road styling to your Jeep. These side steps are engineered for longevity, featuring 0.07-inch wall steel tubing that is treated with a specialized E-coat undercoating before receiving a durable textured black powder-coated finish. This dual-layer protection creates a superior bond to the metal for maximum chip and rust resistance in harsh environments.

Installation is straightforward using the included 3/16-inch powder-coated steel brackets, designed for a custom, flex-free fit that bolts to the vehicle. Each step features a pre-installed, UV-treated non-slip poly pad secured with five mounting pins to protect the metal surface from moisture and prevent corrosion.

• 3-inch round steel tubing with 0.07-inch wall thickness
• Dual-stage finish: E-coated and textured black powder-coated for rust protection
• Heavy-duty 3/16-inch powder-coated steel mounting brackets for a flex-free fit
• UV-treated non-slip step pads with 5-pin mounting
• Includes all necessary installation hardware and brackets
• Manufacturer Part Number: 11591.06

Fits 1997-2006 Jeep Wrangler TJ models, including Sport, Sahara, Rubicon, SE, and Unlimited.

Improve your vehicle's accessibility and exterior styling with a set of Rugged Ridge 3-inch round side steps. These heavy-duty side steps are engineered to mount directly to the vehicle frame, providing a rigid, no-bounce fit that outperforms body-mounted alternatives. Each step is equipped with a high-traction, no-slip step pad secured by rust-proof fasteners, ensuring a safe entry and exit point that withstands the elements and off-road debris.

• 3-inch diameter round steel tubing for maximum strength
• Durable textured black finish for corrosion resistance
• Heavy-duty frame-mounted design eliminates flex and bounce
• UV-treated no-slip step pads provide secure footing in all weather
• Includes all necessary hardware for installation
• Manufacturer Part Number: 11591.04
• Limited 5-year warranty

Fits 1976-1986 Jeep CJ7.

Enhance the accessibility and rugged appearance of your CJ7 with Rugged Ridge 3-Inch Round Tube Side Steps. These side steps are engineered for a secure, no-bounce fit by mounting directly to the vehicle's frame. Each tube is finished in a durable textured black powder coat to resist corrosion and withstand the elements while complementing the classic Jeep aesthetic.

The steps feature integrated no-slip step pads, providing a reliable surface for entry and exit in all weather conditions. These pads are secured to the tube using rust-proof fasteners, ensuring long-term durability and preventing the hardware issues common in lower-quality alternatives.

• Direct frame-mount design for maximum stability and a no-bounce fit
• Heavy-duty 3-inch round steel tube construction
• Textured black powder-coated finish for superior corrosion resistance
• No-slip step pads with rust-proof hardware
• Manufacturer Part Number: 11591.02
• Limited 5-Year Warranty

Fits 1984-2001 Jeep Cherokee (XJ) models including Sport, SE, Limited, and Classic.

Rugged Ridge 3-inch round side steps provide a stable and secure entry point for your Jeep Cherokee XJ. Engineered for durability, these side steps mount directly to the vehicle frame to ensure a rigid, no-bounce fit. The 3-inch round tubing is finished in a textured black powder coat for superior corrosion resistance and a rugged off-road appearance.

Safety is prioritized with integrated no-slip step pads, which are secured to the main tubes using rust-proof fasteners to prevent shifting and ensure long-term reliability. This complete set includes both driver and passenger side steps and all necessary mounting hardware for a straightforward installation.

• Tubing Diameter: 3 inches
• Finish: Textured Black powder coat
• Mounting Style: Frame mounted for maximum stability
• Step Surface: No-slip pads with rust-proof fasteners
• Fitment: 1984-2001 Jeep Cherokee (XJ)
• Manufacturer Part Number: 11590.81
• Warranty: Limited 5-Year Warranty

Fits 2007-2018 Jeep Wrangler 2-Door models, including Rubicon, Sahara, Sport, X, and 70th/75th Anniversary editions.

Complete your Jeep's exterior with a set of Rugged Ridge 3-inch tubular side steps. These steps provide a secure point of entry and exit while maintaining a classic off-road aesthetic. Constructed from heavy-duty .07-inch wall steel tubing, each step undergoes a specialized E-coating process that bonds to the metal for superior corrosion resistance before receiving a chip-resistant gloss black powder coat finish. The custom-fit mounting brackets are laser-cut from 3/16-inch powder-coated steel to ensure a stable, flex-free installation using factory mounting points.

For maximum safety in all weather conditions, each tube features a pre-installed, UV-treated non-slip step pad. These pads are secured using five internal mounting pins to eliminate exposed metal, preventing the rust issues commonly associated with inferior surface-mounted pads.

• 3-inch round tubular design for a clean, classic profile
• Durable .07-inch wall steel construction with dual-stage E-coat and powder coat finish
• Heavy-duty 3/16-inch steel mounting brackets for flex-free performance
• UV-resistant non-slip step pads with 5-pin secure mounting
• Includes all necessary installation brackets and hardware
• Manufacturer Part Number: 11590.05
• Limited 5-Year Warranty

Fits 1976-1983 Jeep CJ5. These Rugged Ridge 3-inch round tube side steps provide a stable, secure entry point for your classic Jeep. Engineered to mount directly to the vehicle frame, this design eliminates the flex and bounce often found with body-mounted alternatives. Each step features a durable, UV-treated no-slip step pad secured to the tube with rust-proof fasteners to ensure long-term durability and safety in all weather conditions.

• Manufactured from heavy-duty 3-inch round steel tubing
• Durable gloss black powder coat finish for corrosion resistance
• Frame-mounted design provides a rigid, no-bounce fit
• Includes no-slip step pads for secure footing
• Uses rust-proof fasteners for step pad attachment
• Manufacturer Part Number: 11590.01
• Limited 5-year warranty

Fits 1976-1986 Jeep CJ7 and Scrambler models.

Rugged Ridge Nerf Bars offer a combination of classic off-road styling and practical functionality. These bars provide a stable stepping surface to make entering and exiting your Jeep safer and easier. Constructed from high-quality stainless steel, they are built to resist corrosion and handle the rigors of both daily driving and trail use.

The set includes UV-treated, no-slide step pads that maintain their grip and appearance even after prolonged exposure to the sun and elements. Each pair is supplied with vehicle-specific mounting brackets and all necessary hardware for a secure installation that aligns with factory points.

• High-quality stainless steel construction for durability and corrosion resistance
• UV-treated non-slip step pads for secure footing in all conditions
• Custom-fit mounting brackets for a precise installation
• Complete kit includes both driver and passenger side bars
• Includes all necessary installation hardware
• Manufacturer Part Number: 11522.03
• Limited 5-year warranty

Fits select 1976-1986 Jeep CJ7 and 1981-1985 Jeep Scrambler.

Rugged Ridge Nerf Bars provide a classic off-road look while serving as a functional, secure step for entering and exiting your Jeep. Constructed from heavy-duty .07-inch thick steel, these bars are finished in a durable black powder coating to resist chips and corrosion from trail debris.

Each bar is equipped with UV-treated, non-slip step pads to ensure stable footing in all weather conditions. These nerf bars are engineered to bolt directly to the vehicle using the included custom mounting brackets and hardware, maintaining a low profile that adds protection without sacrificing ground clearance.

• Manufactured from .07-inch wall thickness steel tubing
• Chip-resistant black powder-coated finish
• UV-treated non-slip step pads for secure footing
• Includes custom mounting brackets and all necessary hardware
• Manufacturer Part Number: 11504.03
• Limited 5-Year Warranty

Fits 2005-2023 Toyota Tacoma Access Cab models with a 6ft bed, including SR, SR5, Pre Runner, and TRD models.

The N-Fab Wheel to Wheel Nerf Step offers a secure entry point and enhanced side protection for your Tacoma. Utilizing N-Fab's patented hoop step design, these steps are engineered to mount high and tight to the vehicle cab for a clean, factory-integrated look that effectively hides the frame. The one-piece, non-modular assembly provides maximum structural integrity and eliminates the potential for rattles or loose components over time.

• Heavy-duty construction using .084 wall steel tubing with a 2-inch main bar diameter.
• Industry-leading 465 lb load rating for reliable performance.
• One-piece welded design ensures long-term durability and simplified installation.
• Main bar is treated for corrosion resistance both inside and out.
• Patented hoop steps feature welded pads that will not crack or break.
• Textured black powder coat finish provides a rugged aesthetic and superior grip.
• Compatible with vehicles both with and without body lift kits.

This kit includes all necessary hardware for a precision fit on the Toyota Tacoma chassis. Manufacturer Part Number: T1678QC-TX.

Fits 2005-2023 Toyota Tacoma Double Cab models (Base, Pre Runner, SR, SR5, Limited, TRD Sport, TRD Off-Road, TRD Pro, and Trail).

N-FAB Wheel to Wheel Nerf Steps provide a secure step surface and enhanced side protection while maintaining a clean, high-and-tight aesthetic. These side bars feature N-FAB's patented hoop step design and a fully welded one-piece non-modular assembly for maximum structural integrity. Built from .084 wall steel tubing, these steps are treated for corrosion resistance inside and out before being finished in a durable textured black powder coat. The design is engineered to mount high against the vehicle cab to conceal the frame while providing a reliable 465-pound load rating.

• Main bar fits high and tight to the body to hide the frame and protect against road debris
• Fully welded one-piece steel construction for superior strength and easy installation
• Patented hoop step design with welded step pads that won't crack or break
• Heavy-duty .084 wall steel tubing with a 465 lb. load rating
• Corrosion-resistant treatment on both internal and external surfaces
• Compatible with vehicles with or without body lift kits
• Manufacturer Part Number: T1678CC-TX

Fits 2005-2023 Toyota Tacoma Double Cab models.

The N-Fab Nerf Step system utilizes a patented hoop step design and an innovative mounting system to provide a secure stepping surface and clean visual aesthetics. These cab-length side steps are engineered as a fully welded, one-piece non-modular assembly, ensuring maximum strength and a rigid feel that exceeds the durability of standard modular designs. The 2-inch main bar is tucked high and tight against the body to conceal the frame while providing extra protection from road debris.

Each set is manufactured from .084 wall steel tubing and finished in a resilient gloss black powder coat. The internal and external surfaces are treated for corrosion resistance to ensure longevity in harsh environments. With an industry-high load rating of 465 pounds, these steps offer reliable performance for daily use and off-road utility.

• Patented N-Fab hoop step design for improved accessibility
• Heavy-duty .084 wall steel tubing construction
• Solid one-piece welded assembly for superior strength
• 465 lb load rating for heavy-duty use
• Corrosion-resistant finish inside and out
• Mounts to factory points for a clean installation
• Manufacturer Part Number: T1678CC

Fits select 2005-2023 Toyota Tacoma Double Cab models with a 6ft bed including Base, SR, SR5, Pre Runner, Limited, and TRD models.

The N-Fab Wheel to Wheel (W2W) Nerf Step system features a patented hoop step design mounted to a heavy-duty 3-inch main bar. Engineered for maximum strength, these steps are constructed as a fully welded one-piece non-modular assembly using .084 wall steel tubing. This design provides an industry-leading load rating of 465 pounds while ensuring a rigid feel and long-term durability that modular steps cannot match.

Designed to mount high and tight to the vehicle cab, the main bar effectively hides the frame and provides additional protection for the rocker panels from road debris. The tubing is treated for corrosion resistance inside and out before receiving a durable textured black powder coat finish. These steps are compatible with both stock height vehicles and those with body lifts without requiring bracket modifications.

• Construction: One-piece welded .084 wall steel tubing
• Tube Diameter: 3-inch main bar
• Finish: Textured Black powder coat
• Load Rating: 465 lbs
• Installation: Direct fit; mounts high and tight to hide the vehicle frame
• MPN: T1589CC-TX
• Warranty: Limited Lifetime Warranty

Fits 2010-2024 Toyota 4Runner models including SR5, Trail, TRD Off-Road, TRD Pro, Limited, and Venture.

N-Fab Nerf Steps provide a reliable stepping surface and enhanced rocker protection for your Toyota 4Runner. Built with a fully welded one-piece design, these side steps eliminate the flex often found in modular systems. The main 3-inch tube is engineered to sit high and tight against the vehicle body, effectively concealing the frame for a cleaner, more integrated look while shielding the rocker panels from road debris.

Constructed from heavy-gauge .084 wall steel tubing, each bar undergoes a multi-stage finishing process. The steel is zinc-coated for internal and external corrosion resistance before being finished in a durable, textured black powder coating. The patented hoop step design features welded pads that offer a secure grip without the risk of cracking or breaking under heavy use.

• Manufacturer Part Number: T1360R
• Main Tube Diameter: 3 inches
• Construction: 1-piece welded .084 wall steel
• Finish: Textured black powder coat over zinc base
• Configuration: Wheel-to-wheel (W2W) with cab access steps
• Installation: Solid non-modular design for straightforward mounting
• Warranty: Limited Lifetime Warranty on structure; 5-year warranty on finish

Fits 2007-2021 Toyota Tundra CrewMax models with a 5.6ft bed.

The N-Fab Bed Access Nerf Step provides a stable stepping surface for both the cabin and the truck bed. This one-piece, fully welded assembly features a third step specifically positioned to grant easy access to the front of the bed, making it simple to reach gear or tools. Built for durability, these steps use heavy-gauge .084 wall steel tubing that is zinc-coated for corrosion resistance and finished with a rugged textured black powder coat.

Designed to mount high and tight to the vehicle body, the 3-inch main tube hides the frame while offering additional protection from road debris. The patented step design and welded step pads provide a reliable, non-slip surface that will not crack or break under load. This kit (MPN: T0798CC-6-TX) comes ready for installation with all necessary hardware included.

• Main tube diameter: 3 inches
• Material: .084 wall steel tubing
• Finish: Textured black powder coat over zinc base coating
• Construction: Fully welded one-piece non-modular design
• Bed Access: Includes three steps per side for cab and bed entry
• Installation: Bolts to factory mounting points
• Manufacturer Part Number: T0798CC-6-TX
• Warranty: Limited Lifetime Warranty

Fits 2007-2021 Toyota Tundra Double Cab models including SR5, Limited, Platinum, 1794 Edition, and TRD Pro.

The N-Fab Cab Length Nerf Step features a patented hoop step design built on a heavy-duty 3-inch main bar. Engineered for a "high and tight" fit, this system sits close to the vehicle body to hide the frame and provide a clean, integrated look. Constructed from durable .084-wall tubular steel, these steps are treated for corrosion resistance both inside and out to withstand harsh environments and road debris.

• Solid one-piece non-modular design for maximum structural integrity and simple installation.
• Patented hoop step design with fully welded step pads that will not crack or break.
• Main bar is mounted high to provide additional protection for the rocker panels.
• Corrosion-resistant coating applied to the interior and exterior of the steel tubing.
• Textured black powder-coat finish for long-lasting aesthetics and grip.
• Includes all necessary mounting hardware and installation instructions.
• Manufacturer Part Number: T0777QC-TX

Every set of N-Fab Nerf Steps is backed by a 5-year finish warranty and a limited lifetime warranty on workmanship.

Fits 2005-2015 Toyota Tacoma Double Cab (Base / Pre Runner / TRD Pro).

Enhance the accessibility and rugged profile of your Toyota Tacoma with N-Fab Nerf Steps. Featuring N-Fab's patented hoop step design, these steps are engineered for a high-and-tight fit that sits close to the vehicle frame for a clean, integrated look. The one-piece non-modular construction provides a rigid stepping surface that adds a layer of protection against road debris and trail obstacles.

Built from heavy-duty .084 wall tubular steel, the main bar is treated for corrosion resistance both inside and out. The welded step pads provide secure footing without the risk of cracking or breaking over time. Finished in a durable textured black powder coat, these steps are designed to withstand the rigors of daily use on work trucks and off-road builds alike.

• Material: .084 wall tubular steel
• Tube Diameter: 2-inch
• Configuration: Wheel-to-Wheel (W2W) / Cab Length design
• Finish: Textured Black Powder Coat
• Construction: Fully welded one-piece non-modular assembly
• Protection: Internal and external corrosion treatment
• Warranty: Limited Lifetime Workmanship Warranty / 5-Year Finish Warranty
• MPN: T0678CC-TX

Fits 2022-2026 Toyota Tundra CrewMax (All Beds). These cab-length N-Fab Predator Pro side steps offer a clean, tight-fitting profile while providing secure access to your truck. The patented drop-down hoop design features a large, dimpled step pad for superior traction in all weather conditions.

Constructed from lightweight, fully welded aluminum, the Predator Pro system is built for long-term durability and corrosion resistance. The 1-piece design ensures maximum strength and simplifies the installation process using a direct bolt-on method to factory mounting points with no drilling required.

• 1-piece fully welded aluminum construction with aluminum end caps
• Textured black finish for enhanced durability and style
• Patented drop-down hoop step with large dimpled step pad
• Direct bolt-on installation; no drilling or cutting required
• Includes two steps (pair) and all necessary hardware
• Manufacturer Part Number: PRT2282CC-TX
• Warranty: 5-year finish / lifetime workmanship

Fits 2014-2024 Toyota 4Runner (SR5, TRD Pro, TRD Off-Road, Limited, Trail, Venture, and Sport).

The N-Fab Predator Pro step system is engineered for truck and SUV owners who demand a clean, high-clearance look without sacrificing ease of access. Featuring a tight-fitting main tube that sits close to the body, these cab-length steps utilize N-Fab's patented drop-down hoop design. The large dimpled step pads provide secure footing in all weather conditions, from muddy trails to icy driveways.

Constructed entirely from aluminum, the Predator Pro system offers exceptional corrosion resistance and high strength. The fully welded one-piece design eliminates rattling and simplifies the installation process. Each set is finished in a durable textured black powder coat and includes aluminum end caps for a refined, professional look.

• One-piece fully welded design for maximum rigidity
• Full aluminum construction with aluminum end caps
• Direct bolt-on installation; no drilling required
• Large dimpled step pads for superior traction
• Patented drop-down hoop steps (2 steps per side)
• Sold as a pair with all necessary mounting hardware
• Manufacturer Part Number: PRT1458R-TX
• Warranty: 5-year finish / lifetime workmanship

Fits 2018-2025 Jeep Wrangler 4-Door models, including Sport, Sahara, Rubicon, 4xe, and Rubicon 392.

The N-Fab Predator Pro Step System delivers a clean, high-clearance look with one of the industry's tightest-fitting tubes. This cab-length system features N-Fab's patented drop-down hoop design, utilizing large dimpled step pads to provide secure footing and easy vehicle access in any weather condition. Built for the trail and the street, the fully welded 1-piece aluminum construction ensures maximum rigidity and durability without the weight of traditional steel steps.

• Full aluminum construction with matching aluminum end caps for superior corrosion resistance
• Durable textured black powder coat finish provides a rugged aesthetic and added grip
• Patented drop-down hoop steps with oversized dimpled traction pads
• 1-piece fully welded design eliminates flexing and simplifies installation
• Direct bolt-on fitment to factory mounting points with no drilling required
• Cab-length configuration featuring 2 steps per side
• Sold as a pair (driver and passenger sides)
• Manufacturer Part Number: PRJ1863-TX
• Warranty: 5-Year finish / Lifetime workmanship

Fits 2019-2025 Ram 2500 and 3500 Crew Cab models (Gas and Diesel).

The N-Fab Predator Pro step system is engineered for truck owners seeking a clean, high-clearance look without sacrificing accessibility. This cab-length system features N-Fab's patented drop-down hoop steps, equipped with large dimpled step pads for reliable traction in rain, mud, or snow. The fully welded one-piece aluminum construction ensures maximum rigidity and a rattle-free performance on or off the road.

Built from high-strength aluminum with integrated aluminum end caps, these steps are naturally corrosion-resistant. The textured black finish provides additional protection against the elements. Installation is straightforward with a direct bolt-on design that utilizes factory mounting points, requiring no drilling into your truck's frame or body.

• Manufacturer Part Number: PRD2080CC-TX
• Full aluminum construction with integrated aluminum end caps
• One-piece fully welded design for maximum durability
• Patented drop-down hoop steps with large dimpled pads
• Direct bolt-on installation; no drilling required
• Sold as a pair (driver and passenger sides)
• 5-year finish warranty / lifetime workmanship warranty

Fits 2020-2025 Jeep Gladiator (JT) 4-door models including Sport, Rubicon, Mojave, and Overland.

The N-Fab Wheel to Wheel Nerf Step is engineered to provide a clean, high-and-tight factory look while offering a dedicated stepping surface for easier cab access. These steps feature N-FAB's patented hoop step design and an innovative mounting system that works seamlessly with or without body lifts. Each set is constructed as a fully welded one-piece assembly, providing superior rigidity compared to modular, bolt-together designs.

Built from .084 wall steel tubing, these bars are treated for corrosion resistance both inside and out before being finished in a durable textured black powder coat. The main bar is positioned close to the rocker panel to hide the vehicle frame and provide additional protection from road debris and trail obstacles.

• Patented hoop step design for secure footing
• One-piece non-modular construction for maximum strength
• 3-inch main tube diameter with .084 wall steel
• 465 lb. industry-leading load rating
• Textured black powder coat finish for durability
• Includes all necessary mounting hardware
• Manufacturer Part Number: J1980T
• Limited Lifetime Warranty

Fits 2018-2025 Jeep Wrangler 4-Door (JL) models, including Sport, Sahara, Rubicon, 4xe, and Unlimited trims.

The N-Fab Wheel to Wheel (W2W) Nerf Step provides a rugged, high-and-tight aesthetic that conceals the vehicle frame while offering secure entry points for driver and passengers. Unlike modular side steps, these are engineered as a fully welded one-piece assembly to eliminate flex and maximize durability. The patented drop-down hoop step design is positioned specifically for the Wrangler 4-door cab to ensure an ergonomic step-up height.

• One-piece non-modular design for superior strength and easy installation.
• Main bar is tucked high and tight to the vehicle body to hide the frame and protect against road debris.
• Constructed from heavy-duty .084 wall steel tubing.
• Internal and external corrosion treatment ensures long-term finish integrity.
• Industry-leading 465-pound load rating.
• Welded steel step pads that will not crack or break under heavy use.
• Finished in a durable gloss black powder coat.
• Includes all necessary mounting hardware and instructions.

Manufacturer Part Number: J1866-GB

Fits select 2018-2025 Jeep Wrangler and Wrangler JK 4-door models, including Unlimited, Rubicon, Sahara, Sport, and 4xe variants.

The N-Fab Wheel to Wheel (W2W) Nerf Step offers a rugged, functional solution for accessing your Jeep Wrangler's cab. These steps feature N-FAB's patented hoop step design, providing a secure platform for entry and exit while maintaining a clean, high-and-tight profile that hides the vehicle frame. Built as a fully welded one-piece assembly, these bars eliminate the flex and weak points found in modular designs.

Constructed from heavy-duty .084 wall steel tubing, these 3-inch main bars are treated for corrosion resistance both inside and out. The textured black finish provides a durable barrier against road debris and harsh conditions. With an industry-leading load rating of 465 pounds, these steps are engineered for serious utility. The innovative mounting system allows for installation on vehicles with or without body lift kits without needing bracket modifications.

• One-piece non-modular welded design for maximum strength
• Main bar mounts high and tight to the rocker panel to conceal the frame
• Patented hoop step design with welded step pads that won't crack or break
• Internal and external corrosion treatment for long-term durability
• Simple bolt-on installation
• Manufacturer Part Number: J1866

• Main Bar Diameter: 3 inches
• Material: .084 wall steel tubing
• Load Rating: 465 lbs
• Finish: Textured Black
• Warranty: Limited Lifetime Warranty

Fits 2018-2025 Jeep Wrangler 2-Door models including Rubicon, Sport, Sport S, Willys, and Islander.

The N-Fab Wheel to Wheel Nerf Step (MPN J1846) provides a robust, one-piece stepping solution designed specifically for the Jeep Wrangler JL 2-door. Utilizing N-Fab's patented hoop step design, these side steps are engineered from heavy-duty .084 wall steel tubing for maximum structural integrity and an industry-leading 465-pound load rating. The Wheel to Wheel configuration runs the full span between the wheel wells, offering enhanced protection from road debris and a streamlined aesthetic.

Finished in a durable Textured Black powder coat, these nerf steps are treated for corrosion resistance both inside and out. The innovative mounting system ensures the main bar sits high and tight to the vehicle body, effectively concealing the frame while maintaining essential ground clearance. Installation is simplified by the non-modular, fully welded construction.

• One-piece non-modular design for maximum strength and simplified installation
• Patented hoop step design with welded step pads that will not crack or break
• Main bar sits high and tight to the vehicle cab for a clean factory look
• Built from .084 wall steel tubing with a 465 lb load rating
• Internal and external corrosion treatment for long-term durability
• Limited Lifetime Warranty
• Manufacturer Part Number: J1846

Fits 2022-2026 Toyota Tundra CrewMax models, including SR, SR5, Limited, Platinum, 1794 Edition, TRD Pro, and Capstone.

The N-Fab Podium LG side steps provide secure, all-weather access to your vehicle with a patented hoop step design. Built from durable stainless steel with a fully welded one-piece construction, these steps feature an expanded and enclosed sure-grip step plate for maximum traction. The 3-inch main tube diameter is engineered to sit high and tight against the rocker panels, offering a modern look while protecting the vehicle body on both stock and lifted trucks.

• Main tube diameter: 3 inches
• Material: Stainless steel construction
• Finish: Textured Black powder coat
• Design: Patented drop-down hoop steps with sure-grip step plates
• Construction: Fully welded one-piece assembly for superior strength
• Installation: Bolts directly to factory mounting points
• Manufacturer Part Number: HPT2282CC-TX
• Warranty: 5-year finish warranty; lifetime craftsmanship warranty

Fits 2005-2023 Toyota Tacoma Double Cab models across all trims including SR, SR5, TRD Sport, TRD Off-Road, and TRD Pro.

The N-Fab Podium LG Nerf Steps offer a modern, high-and-tight profile that enhances your vehicle's aesthetic while providing reliable access. Constructed from fully welded one-piece stainless steel, these side steps feature a 3-inch main tube diameter for maximum durability and rigidity. The patented hoop step design includes an all-new expanded and enclosed sure-grip step plate, ensuring secure footing in all weather conditions, whether your Tacoma is at stock height or lifted.

Designed for ease of installation, the Podium LG bolts directly to the vehicle body for a clean, integrated look. The textured black powder coat finish provides excellent corrosion resistance and a rugged appearance that complements the Tacoma's lines.

• Main Tube Diameter: 3 inches
• Material: Stainless Steel
• Finish: Textured Black Powder Coat
• Construction: Fully welded 1-piece assembly
• Step Type: Patented drop-down hoop with enclosed sure-grip plates
• Manufacturer Part Number: HPT1580CC-TX
• Warranty: 5-Year Finish / Lifetime Craftsmanship

Fits 2018-2025 Jeep Wrangler 4-Door models including Sport, Sahara, Rubicon, and 4xe.

The N-Fab Podium LG side steps offer a high-clearance, modern profile combined with a functional drop-down design for easy access to your Jeep’s cabin. Constructed from high-strength stainless steel with a fully welded one-piece design, these 3-inch nerf bars are engineered to sit high and tight against the body. This provides a clean aesthetic while maintaining ground clearance on both stock and lifted vehicles. The patented hoop step features an expanded and enclosed sure-grip step plate to ensure safe footing in all weather conditions.

• 3-inch main tube diameter with a high-and-tight fit for a modern look.
• Fully welded 1-piece stainless steel construction for maximum durability.
• Patented hoop step design with expanded, enclosed sure-grip step plates.
• Durable textured black finish provides superior corrosion resistance.
• Simplified installation process with all necessary hardware included.
• Manufacturer Part Number: HPJ1866-TX
• Warranty: Lifetime craftsmanship warranty and 5-year finish warranty.

Fits 2007-2018 Jeep Wrangler JK 4-Door Unlimited models, including Rubicon, Sahara, Sport, and X trims.

The N-Fab Podium LG side steps offer a technical, modern look for your JK while providing reliable vehicle access. Built from high-strength stainless steel with fully welded one-piece construction, these 3-inch main tube steps are designed to mount high and tight to the vehicle body. This configuration provides a clean profile while maximizing ground clearance on both stock and lifted Jeeps.

The patented hoop step design features an expanded and enclosed sure-grip step plate, ensuring secure footing in all weather conditions. Each set is finished in a durable textured black powder coat for superior corrosion resistance and lasting aesthetics.

• Main tube diameter: 3 inches
• Material: Stainless Steel construction
• Finish: Textured Black
• Design: Patented hoop step with expanded sure-grip plate
• Installation: 1-piece fully welded assembly
• Warranty: 5-year finish warranty; lifetime craftsmanship warranty
• Manufacturer Part Number: HPJ0764-TX