Upgrade your vehicle with the Kleinn RSGM4 wireless remote start system, engineered specifically for 2007 to 2023 General Motors full-size trucks, vans, and SUVs with automatic transmissions. This kit allows you to pre-condition your cabin by warming it up in the winter or cooling it down in the summer before you enter the vehicle.

Installation is designed to be straightforward and efficient, typically taking about 35 minutes. The included vehicle-specific GMT4 T-harness provides a 100% plug-and-play connection, requiring absolutely no wire cutting or splicing of your factory harness. This system integrates directly with your factory key-to-start remote using a simple lock-lock-lock activation sequence to trigger a 15-minute engine runtime. To complete the setup, a Fortin FLASH LINK UPDATER programmer interface is included in the box, which requires a Windows PC for configuration.

• Manufacturer Part Number: RSGM4
• Fits select 2007-2023 Cadillac, Chevrolet, and GMC vehicles
• Automatic transmission only
• Ignition Type: Key-to-Start (Not for push-button start)
• Compatible with gas or diesel engines
• Uses factory remote (Lock, Lock, Lock sequence)
• Included hardware: GMT4 T-harness and Fortin FLASH LINK UPDATER
• Supported upgrades: RFKIT1, RFKIT4, RFKIT2W, or Smartphone Control (one at a time)

Fits select 2003-2007 Cadillac Escalade, Chevrolet Silverado/Avalanche/Tahoe/Suburban/Express, and GMC Sierra/Yukon/Savana (Gas or Diesel Engines).

The Kleinn RSGM12 is a professional-grade wireless remote start system designed specifically for GM full-size vehicles equipped with an automatic transmission and traditional key-to-start ignition. This system allows you to pre-condition your vehicle's cabin temperature from a distance, ensuring comfort in both extreme heat and freezing winter conditions. The kit is built around the premium Firstech HCX remote start and data module, ensuring high-speed communication with the factory electronics.

Installation is streamlined via the included ADS-THR-GM12 vehicle-specific T-harness. This semi-plug-and-play design significantly reduces wiring complexity, requiring only a single wire-to-wire connection to the factory brake wire. The module arrives pre-flashed for immediate compatibility, eliminating the need for complex programming on-site. For users seeking expanded connectivity, the system is fully compatible with Drone smartphone control modules and mobile two-way upgrade kits.

• Manufacturer Part Number: RSGM12
• Range: Up to 3,000 feet
• Remotes: Two (2) long-range 4-button remote controls
• Runtime: Pre-set 15-minute runtime
• Included Components: Firstech HCX module, ADS-THR-GM12 T-harness, and hardware
• Compatibility: Automatic transmissions only; gas or diesel engines
• Installation: Estimated 55-minute install time with 1-wire connection

Fits select 2015-2021 Ford F-150, F-250 Super Duty, and F-350 Super Duty trucks.

The Kleinn RSFD3 is a custom-engineered, 100% plug-and-play remote start system designed to add premium comfort without the complexity of traditional wiring. This system utilizes a vehicle-specific FORT3 T-harness and specialized hood jumper, requiring zero wire cutting or splicing for a clean, factory-style installation. Whether your truck features a traditional key-to-start or a modern push-to-start ignition, the RSFD3 integrates seamlessly with your existing factory security system.

The module arrives pre-flashed from the factory, eliminating the need for external programmers or dealer assistance. Once installed, activate your engine using your factory keyless remote with a simple Lock-Unlock-Lock sequence. This setup provides a customizable 5 to 15-minute runtime, allowing you to pre-condition your cab while remaining compatible with optional long-range RF kits or smartphone control modules.

• Quick Installation: Features a 100% plug-and-play design with an estimated 20-minute install time.
• Factory Remote Integration: No extra fobs needed; uses the factory Lock-Unlock-Lock sequence.
• Engine Compatibility: Works with both gas and diesel engines with automatic transmissions.
• Included Hardware: Remote Start Module, FORT3 T-harness, and FORT3 Hood Jumper.
• Expandable: Compatible with RFKIT1, RFKIT4, RFKIT2W, or Smartphone Control (supports one upgrade at a time).
• MPN: RSFD3

Fits select 2011-2019 Ford F-150, Super Duty, Edge, Expedition, Explorer, Flex, and Lincoln MKX models.

The Kleinn RSFD1 is a premium wireless remote start system designed to integrate seamlessly with your vehicle's factory keyless entry. This system allows you to pre-condition your cabin—cooling it in the summer or warming it in the winter—using your original equipment manufacturer (OEM) remote. Activation is simple and utilizes the factory lock-unlock-lock sequence.

Engineered for a hassle-free installation, the RSFD1 features a 100% plug-and-play design. Utilizing the included FORT1 80-bit T-harness and OBDII T-harnesses, this system requires no wire cutting or splicing, preserving your vehicle's factory wiring integrity. The module comes pre-flashed, meaning no computer programming is required for a standard installation that typically takes only 30 minutes.

• Manufacturer Part Number: RSFD1
• Activation: Uses factory remote (Lock, Unlock, Lock sequence)
• Installation: Plug-and-play with three T-harness connections
• Included Hardware: Remote Start Module, FORT1 80bit T-harness, and OBDII T-harnesses
• Compatibility: Automatic transmission and key-to-start ignition only
• Fuel Type: Compatible with Gas and Diesel engines
• Programming Requirement: Requires two (2) non-cloned factory keys for setup
• Runtime: 5 to 15-minute runtime (based on factory defaults)
• Expandability: Supports RFKIT1, RFKIT4, RFKIT2W, or Smartphone Control (one upgrade at a time)

Fits select 2007-2023 Chevrolet, GMC, Cadillac, Ford, Dodge, Jeep, and Chrysler models.

The K&N Throttle Control Module (Part Number: 20-1000) is a plug-and-play electronic signal processor designed to eliminate throttle lag and sharpen acceleration without altering factory ECU settings. By intercepting and optimizing the signal between the accelerator pedal and the engine control unit, this system allows you to fine-tune your vehicle's responsiveness to match your driving style.

Designed for straightforward installation, the module typically installs in under 30 minutes by connecting directly to the factory throttle pedal harness. The included aluminum control dial allows for on-the-go adjustments, letting you increase or decrease pedal sensitivity instantly.

• Sharper acceleration and improved throttle response
• Adjustable on-the-go via an in-cab aluminum control dial
• No software programming or ECU flashing required
• Plug-and-play installation with vehicle-specific connectors
• Includes module, wiring harness, adjustable knob, and mounting hardware
• Manufacturer Part Number: 20-1000
• Covered by a K&N 90-Day Limited Warranty

The Innovate Motorsports TC-4 PLUS is a precision 4-channel Type-K thermocouple amplifier designed for high-accuracy temperature monitoring in automotive and performance applications. Whether utilized as a standalone measurement device or integrated into the Innovate Modular Tuning System (MTS), the TC-4 PLUS provides the critical data needed for tuning and diagnostics.

Equipped with four fully programmable analog outputs, this unit easily interfaces with dynamometers, data acquisition systems, and standalone ECUs. Its serial ports allow for seamless daisy-chaining with other MTS-compatible hardware, including the MTX-L, LM-2, LC-2, and SSI-4 Plus, creating a comprehensive data logging network.

• Four channels dedicated to Type-K thermocouple sensors
• Four fully programmable 0-5V analog outputs for external logging
• Integrated digital input and output for MTS daisy-chaining
• Ideal for monitoring EGT, CHT, or fluid temperatures
• Manufacturer Part Number: 3915

What's in the Box: TC-4 PLUS unit, Serial Programming Cable, Molex-to-Molex Patch Cable for MTS integration, and installation manual.

The Innovate Motorsports SSI-4 Plus (3914) provides a versatile solution for capturing data from four external sensors simultaneously. This interface is engineered to handle a variety of signal types, including frequency inputs for monitoring engine RPM and vehicle speed, as well as 0-5V analog references used by MAP sensors, pressure transducers, and temperature probes.

As a core component of the Innovate Modular Tuning System (MTS), the SSI-4 Plus can be used as a standalone logging device or integrated into a larger log chain. Its integrated serial ports allow for seamless daisy-chaining with other MTS-compatible hardware, including the MTX-L, LM-2, LC-2, and TC-4 Plus, ensuring all your critical telemetry data is synchronized into a single stream.

• Four channels of external sensor data acquisition
• Supports frequency inputs (RPM, Speed) and 0-5V analog signals
• Fully compatible with Innovate Motorsports Modular Tuning System (MTS)
• Serial ports for daisy-chaining multiple devices
• Manufacturer Part Number: 3914

The Innovate Motorsports 3898 LSU 4.9 Upgrade Kit provides the necessary components to transition your wideband controller to the modern Bosch LSU 4.9 sensor standard. This kit is engineered for users seeking the improved accuracy and faster response times inherent to the 4.9 sensor architecture compared to older 4.2 units.

Featuring an 18-foot sensor cable, this kit offers the extended reach required for large chassis, rear-engine vehicles, or complex wiring routes. The extra length ensures a secure, strain-free connection from the exhaust-mounted sensor to your Innovate tuning interface. Use the LM Programmer software to verify your current device configuration before installation.

• Manufacturer Part Number: 3898
• Sensor Type: Genuine Bosch LSU 4.9 Wideband Oxygen Sensor
• Cable Length: 18 Feet (approx. 5.5 Meters)
• Compatibility: Connects to Innovate Motorsports wideband controllers designed for LSU 4.9 hardware
• Installation: Direct-fit replacement cable and sensor for compatible kits

Upgrade your air/fuel ratio monitoring system with the Innovate Motorsports LSU 4.9 Upgrade Kit. This kit is designed to transition compatible wideband controllers to the Bosch LSU 4.9 sensor, providing increased accuracy and response time over older sensor generations.

• Includes one Bosch LSU 4.9 wideband oxygen sensor for precise AFR readings.
• Includes an 8-foot sensor cable for flexible routing from the exhaust to the controller.
• Verified compatibility with Innovate products via the LM Programmer software.
• Manufacturer Part Number: 3897

The 8-foot cable length ensures sufficient reach for most vehicle platforms, while the LSU 4.9 sensor provides the reliability needed for performance tuning. Before installation, users can verify their current sensor configuration by connecting their device to the LM Programmer software to ensure a seamless setup.

The Innovate Motorsports Bosch LSU 4.9 Wideband Oxygen Sensor is a precision replacement component designed for use with Innovate wideband controllers. As a critical part of your air-fuel ratio (AFR) monitoring system, this genuine Bosch sensor ensures your engine management or gauge receives accurate, high-speed data for optimal tuning and safety.

• Genuine Bosch LSU 4.9 wideband UEGO technology
• Direct replacement for Innovate Motorsports part number 3888
• Compatible with modern Innovate digital controllers
• Optimized for faster light-off times and improved accuracy over legacy 4.2 sensors

To confirm compatibility with your existing hardware, you can verify your current sensor type by connecting your device to the Innovate LM Programmer software utility before installation.

The Innovate Motorsports PL-1 Pocket Logger (MPN 3875) provides a standalone, portable solution for recording engine data from your Modular Tuning System (MTS) compatible hardware. This kit eliminates the need to have a laptop in the vehicle while logging, capturing high-speed data directly from devices like the LC-2 wideband, SSI-4 PLUS, and MTX-series gauges.

The PL-1 integrates seamlessly into your serial chain, storing logs on the included SD card for precise analysis using the LogWorks 3.0 software suite. With the included patch cables, the system maintains backward compatibility with legacy Innovate hardware, ensuring a complete data picture across your entire sensor array.

• Standalone Logging: Records MTS data channels without requiring a PC during the run.
• Complete Kit: Includes PL-1 unit, 2GB SD memory card, USB card reader, and 12V power cable.
• MTS Compatibility: Works with LC-2, SSI-4 PLUS, MTX Gauges, LC-1, TC-4, and LMA-3.
• Connectivity: Includes standard MTS patch cable and 2.5mm to 4-pin adapter for older legacy devices.
• Analysis: Full support for LogWorks 3.0 software for graphing and reviewing engine parameters.

This genuine Bosch LSU 4.2 wideband oxygen (O2) sensor is a direct replacement for compatible Innovate Motorsports wideband controllers and tuning systems. High-accuracy air/fuel ratio (AFR) monitoring is essential for safe performance tuning and engine management, and this sensor provides the precise feedback required for real-time data logging and adjustment.

To ensure you are ordering the correct replacement, you can verify your current sensor type by connecting your device to a computer and using the Innovate LM Programmer software. This sensor is designed to restore fast response times and measurement accuracy in systems where the original sensor has been fouled or reached the end of its service life.

• Manufacturer Part Number: 3737
• Sensor Type: Bosch LSU 4.2 Wideband
• Application: Compatible with select Innovate Motorsports wideband controllers
• Verification: Compatible with LM Programmer software identification

Fits select 2007-2021 Honda (Accord, Civic, Fit, HR-V, Pilot, Ridgeline), Acura (MDX, TLX), and Infiniti (G25) models (2.4L).

The Injen Technology X-Pedal Pro Black Edition is a plug-and-play performance module designed to eliminate the sluggish, delayed throttle response typical of modern factory drive-by-wire systems. By intercepting and optimizing the signal between your accelerator pedal and the ECU, this controller allows you to customize your vehicle's acceleration curves for a more responsive or more economical driving experience.

Housed in a sleek, black anodized aluminum casing, the X-Pedal Pro features a high-speed Digital-to-Analog Converter (DAC) that processes signals 1000 times per second for instant feedback. Installation is straightforward and requires no cutting or splicing, connecting directly to the factory harness in under 5 minutes. The module is warranty-friendly and leaves no trace on the ECU once removed.

• Sport Mode: 9 levels of increased sensitivity for performance driving and racing.
• ECO Mode: 7 levels of reduced sensitivity to improve fuel economy in city environments.
• Launch Control/Drag Race Mode: Maximizes acceleration speed for track use.
• Anti-Skid Function: Restricts throttle input for better traction on low-friction surfaces.
• High-Speed Processor: DAC technology provides 1000 times/sec processing speed.
• Construction: Durable black anodized aluminum housing for an OE+ interior look.
• Manufacturer Part Number: PT0018B

Note: This part is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.

Fits select 2011-2024 Lexus CT200h, GS350, IS200t, IS250, IS300, IS350, RC200t, RC300, RC350 and Toyota Camry, Corolla, and Tacoma (3.5L).

Eliminate factory throttle lag and customize your vehicle's responsiveness with the Injen Technology X-Pedal Pro Black Edition. Modern drive-by-wire systems often suffer from a built-in delay between the pedal and the ECU, resulting in sluggish acceleration when merging or passing. The PT0014B plug-in module intercepts and optimizes these signals, allowing for instant throttle response or improved fuel economy at the touch of a button.

• High-Speed Processing: Built-in Digital to Analog Converter (DAC) provides 1000 times/sec processing speed for zero-latency signal delivery.
• Customizable Performance: Features 9 levels of Sport Mode for aggressive response, 7 levels of ECO Mode for city fuel efficiency, and a dedicated Launch Control/Drag Race mode.
• Premium Construction: The controller is housed in a sleek, CNC-machined black anodized aluminum housing for a durable and elegant cabin aesthetic.
• Simple Installation: True plug-and-play design requires no wire cutting or splicing and installs in less than 5 minutes.
• Versatile Compatibility: Works seamlessly with both automatic and manual transmissions and is compatible with most aftermarket programmers.
• Safety & Protection: Includes an anti-skid function for low-friction surfaces and leaves no footprint on the ECU once removed.

Note: This part is not CARB exempt at this time and is not legal for sale or use in California on vehicles registered with the California DMV.

Fits select 2011-2022 Cadillac, Chevrolet, Chrysler, Dodge, Ford, Jeep, and Ram vehicles equipped with 6.2L, 5.7L, or 6.4L engines.

The Injen Technology X-Pedal Pro Black Edition (PT0013B) is a high-speed throttle response controller designed to eliminate the inherent lag found in modern drive-by-wire systems. By intercepting and recalibrating the signal between the accelerator pedal and the factory ECU, this module allows you to customize pedal sensitivity on the fly. Whether you are looking for more aggressive acceleration for passing or a more economical profile for city commuting, the X-Pedal Pro provides precise control without modifying the factory engine tune.

Housed in a premium black anodized aluminum casing, the unit features a high-speed digital-to-analog converter (DAC) that processes signals 1,000 times per second for instantaneous feedback. Installation is a true plug-and-play process that requires no wire cutting or splicing, making it completely reversible and warranty-friendly as it leaves no electronic footprint after removal.

• Sport Mode: 9 levels of increased sensitivity for performance driving and mountain roads.
• ECO Mode: 7 levels designed to optimize fuel economy in urban environments.
• Launch Control/Drag Race Mode: Reaches maximum acceleration quickly for competitive use.
• Anti-Skid Function: Reduces throttle sensitivity to help maintain traction on low-friction surfaces.
• Construction: Sleek black anodized aluminum housing with a built-in high-speed processor.
• Installation: Quick 5-minute plug-and-play setup; compatible with most aftermarket programmers.
• Compatibility: Operates seamlessly with both manual and automatic transmissions.

Fits select 2002-2024 Nissan, Jeep, RAM, Infiniti, and Chevrolet vehicles including Altima, Titan, Wrangler, Gladiator, and 1500 (2.0T / 3.6L).

Eliminate throttle lag and customize your vehicle's power delivery with the Injen X-Pedal Pro Black Edition. This plug-and-play module installs between your factory accelerator pedal sensor and the wiring harness, intercepting the signal to provide immediate engine response. By bypassing the programmed delay in modern drive-by-wire systems, the X-Pedal Pro allows for crisper acceleration in Sport mode or improved fuel economy in ECO mode.

Housed in a sleek, black anodized aluminum casing, the controller features a high-speed Digital-to-Analog Converter (DAC) that processes signals 1,000 times per second for seamless operation. The unit is designed to be warranty-friendly, leaving no footprint on the ECU once removed, and is compatible with most aftermarket programmers.

• 9 levels of Sport Mode for performance driving and mountain roads
• 7 levels of ECO Mode for increased city fuel efficiency
• Launch Control/Drag Race Mode for maximum acceleration
• Integrated anti-skid function for low-traction surfaces
• Built-in high-speed processor for 1000Hz signal processing
• Sleek black anodized aluminum housing
• Simple plug-and-play installation with no wire cutting required
• Manufacturer Part Number: PT0010B

Note: This part is not CARB exempt at this time and is not legal for sale or use in California on emissions-controlled vehicles.

Fits select 2005-2020 Audi and Volkswagen models including A3, A4, A6, S3, S4, Golf, GTI, Jetta, and Passat (2.0T).

The Injen Technology X-Pedal Pro Black Edition (PT0009B) is a high-performance throttle response controller designed to eliminate the inherent delay found in modern drive-by-wire systems. By intercepting and modifying the signal sent to the factory ECU, this plug-in module allows you to customize pedal sensitivity for a more responsive driving experience or improved fuel efficiency on the fly.

Housed in a sleek, black anodized aluminum casing, the unit features a high-speed Digital to Analog Converter (DAC) that processes signals 1000 times per second. This ensures smooth, immediate throttle transitions without the lag commonly experienced when merging into traffic or passing. Installation is a straightforward plug-and-play process that connects to your factory harness in under five minutes with no wire splicing required.

• Sport Mode: 9 levels of increased sensitivity suitable for performance and mountain driving.
• ECO Mode: 7 levels designed to improve fuel economy in city environments.
• Launch Control/Drag Race: Specialized setting to reach maximum acceleration as quickly as possible.
• Anti-Skid: Safety function designed to help manage throttle application on low-friction surfaces.
• Transmission Compatible: Operates seamlessly with both automatic and manual transmissions.
• Warranty Friendly: Leaves no electronic footprint after removal and is compatible with most aftermarket programmers.

Note: This part is not CARB exempt at this time and is not legal for sale or use in California on emissions-controlled vehicles.