Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Welcome to Atlus Automotive
Main menu
-
Performance
- Performance
-
Intake & Exhaust
- Intake & Exhaust
- Air Intake Systems
- Cold Air Intakes
- Air Intake Components
- Air Filters
- Air Filters - Drop In
- Air Filters - Direct Fit
- Air Filters - Universal Fit
- Pre-Filters
- Recharge Kits
- OE Replacement Air Intake Components
- Exhaust, Mufflers & Tips
- Catback
- Axle Back
- Muffler
- Tips
- Headers & Manifolds
- Connecting Pipes
- Catalytic Converter Direct Fit
- Catalytic Converter Universal
- Exhaust Collector
- Merge Collectors
-
Engine Upgrades
- Engine Upgrades
- Engine Components
- Camshafts
- Valve Springs, Retainers
- Head Gaskets
- Head Stud & Bolt Kits
- Main Stud & Bolt Kits
- Gasket Kits
- Engine Mounts
- Oil Catch Cans
- Oil Separators
- Throttle Bodies
- Throttle Body Spacers
- Crankshaft Dampers
- Valves
- Piston Rings
- Piston Sets - Forged - 4cyl
- Piston Sets - Cast - 4cyl
- Connecting Rods - 4Cyl
- Rotating Assemblies
- Stroker Kits
-
Turbo & Cooling
-
Fuel, Ignition & Tuning
-
Suspension & Handling
- Suspension & Handling
-
Lowering & Coilovers
-
Arms, Links & Alignment
-
Lift & Off-Road Suspension
-
Chassis & Bracing
-
Wheels & Tires
- Wheels & Tires
-
Wheels
-
Tires
-
Drivetrain & Clutch
-
Brakes
- Brakes
-
Pads & Rotors
-
Brake Kits & Calipers
-
Lines, Fluid & Hardware
-
Exterior & Lighting
- Exterior & Lighting
-
Lighting
-
Exterior Styling
-
Bumpers & Protection
-
Interior & Electronics
- Interior & Electronics
-
Interior Upgrades
-
Gauges & Electronics
-
Audio & Safety
-
Overland & Utility
- Overland & Utility
-
Bed Covers & Bed Gear
-
Steps, Racks & Storage
-
Trail & Towing
-
Maintenance & Garage
- Maintenance & Garage
-
Oil, Fluids & Filters
-
Detailing & Car Care
-
Tools & Fabrication
Your cart
Choose your Location
-
Atlus
1340 Cobb Dr, Unit 1, Eustis, FL 32736
352-234-4458
Mon – Fri: 8:30 am – 4:30 pm
Sat: 9:00 am – 2:00 pm
Sun: Closed
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
67 products
67 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
The XRS Rhino Accessory Gear Plate was created to mount a variety of standard trail accessories from major manufacturers (Daystar, Cam Cans, Tread Pro, Roto Pax, MOLLE/PALS, Max Trax or Jerry Cans) on to Go Rhino's 4-CORE system. While it was specifically designed to bolt on to the 10-inch spaced 4-CORE cross bars of the SRM Series Roof Racks, CEROS Roof Racks or XRS Xtreme Rack, the panel is drillable and can be custom hacked to mount on any flat surface. XRS Accessory Gear Plate comes with a Limited Lifetime warranty on materials and construction and a 5 year warranty on the Textured Black Finish.
Installation Instructions- Limited Lifetime warranty on materials and construction and a 5 year warranty on the Textured Black Finish.
- Includes universal mounting hole and slot patterns to mount just about anything
- Compatible with most recovery track boards including Maxtrax and Tread pro
- Compatible with up to three (3) Daystar cam cans - single or double stack
- Designed with an embedded mole mounting system for universal attachment
- Includes one gear panel and eight (8) 1/4"-20 fasteners
- Works with all 4-CORE channel systems (SRM, XRS, CEROS)
- Compatible with single and dual Roto-Pax Tank systems
- Compatible with most quick-fist mounting solutions
- The gear panel can be mounted in any orientation
- Mounts to XRS Overland Xtreme Rack
- Textured black powder coat
The CEROS Low Profile Aluminum Roof Rack brings cutting edge style and practicality to your truck. The aerodynamic, low profile design contours the vehicle roof’s curves with application-specific fit. The CEROS utilizes Go Rhino’s exclusive 4-CORE crossbars, an extruded track system that can work with any 1/4-20 hex bolt and offers unlimited mounting options for accessories, gear and tools. The frontmost crossbar supports the front fairing and can be used to mount light bars or multiple cube lights. The dropped edge of the fairing allows a single row light bar to remain flush with the frame’s topline, maintaining the sleek, streamlined look. (Note: Lights sold separately.) CEROS Racks come with a Limited Lifetime warranty on materials and construction and a 5 year warranty on the Textured Black Finish.
Installation Instructions- 6 1/2-inch tall fairing with dropped front edge allows most single row light bar to remain flush with frame
- Limited Lifetime warranty on materials and construction and a 5 year warranty on the Textured Black Finish
- Front 4-CORE rail supports front fairing and mounts individual lights and light bars easily and securely
- Application-specific fit exclusive to the 2022-2023 Toyota Tundra Excluding Panoramic Moonroof
- Unlimited mounting options for accessories, gear and tools with 4-CORE crossbars
- No drilling required, all mounting hardware included
- Low profile design for sleek, aerodynamic look
- Aluminum construction saves weight
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2022-2026 | Toyota | Tundra | 1794 Edition |
| 2022-2026 | Toyota | Tundra | Capstone |
| 2022-2026 | Toyota | Tundra | Limited |
| 2022-2026 | Toyota | Tundra | Platinum |
| 2022-2026 | Toyota | Tundra | SR |
| 2022-2026 | Toyota | Tundra | SR5 |
| 2022-2026 | Toyota | Tundra | TRD Pro |
$849.99
$374.00
Introducing our replacement crossbars and side rails, designed to fit 4-door vehicles. These components feature a durable 2-stage light textured black powder coat finish, ensuring long-lasting protection and a sleek appearance. Enjoy peace of mind with a 3-year finish warranty and a limited lifetime warranty.
Installation Instructions- DURABLE 2-STAGE LIGHT TEXTURED BLACK POWDER COAT FINISH
- 3 YEAR FINISH/LIMITED LIFETIME WARRANTY
- REPLACEMENT CROSSBARS AND SIDE RAILS
- FITS 4 DR
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2011 | Jeep | Wrangler | Unlimited 70th Anniversary |
| 2016 | Jeep | Wrangler | Unlimited 75th Anniversary |
| 2007-2017 | Jeep | Wrangler | Unlimited Rubicon |
| 2007-2017 | Jeep | Wrangler | Unlimited Sahara |
| 2010-2017 | Jeep | Wrangler | Unlimited Sport |
| 2016 | Jeep | Wrangler | Unlimited Sport S |
| 2007-2010 | Jeep | Wrangler | Unlimited X |
| 2018 | Jeep | Wrangler JK | Unlimited Rubicon |
| 2018 | Jeep | Wrangler JK | Unlimited Sahara |
| 2018 | Jeep | Wrangler JK | Unlimited Sport |
| 2018 | Jeep | Wrangler JK | Unlimited Sport S |
$558.00
Introducing our replacement frame kit, designed to fit both 2-door and 4-door models. This kit features a durable two-stage light textured black powder coat finish, ensuring long-lasting protection and a sleek appearance. Backed by a 3-year finish warranty and a limited lifetime warranty, it offers peace of mind and confidence in your purchase. Upgrade your vehicle with this high-quality replacement frame kit and enjoy enhanced durability and style.
Installation Instructions- DURABLE 2-STAGE LIGHT TEXTURED BLACK POWDER COAT FINISH
- 3 YEAR FINISH/LIMITED LIFETIME WARRANTY
- REPLACEMENT FRAME KIT
- FITS BOTH 2/4 DR
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2011 | Jeep | Wrangler | 70th Anniversary |
| 2016 | Jeep | Wrangler | 75th Anniversary |
| 2007-2017 | Jeep | Wrangler | Rubicon |
| 2007-2017 | Jeep | Wrangler | Sahara |
| 2010-2017 | Jeep | Wrangler | Sport |
| 2016 | Jeep | Wrangler | Sport S |
| 2011 | Jeep | Wrangler | Unlimited 70th Anniversary |
| 2016 | Jeep | Wrangler | Unlimited 75th Anniversary |
| 2007-2017 | Jeep | Wrangler | Unlimited Rubicon |
| 2007-2017 | Jeep | Wrangler | Unlimited Sahara |
| 2010-2017 | Jeep | Wrangler | Unlimited Sport |
| 2016 | Jeep | Wrangler | Unlimited Sport S |
| 2007-2010 | Jeep | Wrangler | Unlimited X |
| 2007-2010 | Jeep | Wrangler | X |
| 2018 | Jeep | Wrangler JK | Rubicon |
| 2018 | Jeep | Wrangler JK | Sahara |
| 2018 | Jeep | Wrangler JK | Sport |
| 2018 | Jeep | Wrangler JK | Sport S |
| 2018 | Jeep | Wrangler JK | Unlimited Rubicon |
| 2018 | Jeep | Wrangler JK | Unlimited Sahara |
| 2018 | Jeep | Wrangler JK | Unlimited Sport |
| 2018 | Jeep | Wrangler JK | Unlimited Sport S |
$932.00
4 CROSSBARS DESIGNED TO BE USED WITH MOST AFTERMARKET ACCESSORIES
- 4 CROSSBARS DESIGNED TO BE USED WITH MOST AFTERMARKET ACCESSORIES
- EASY ACCESS TO SOFT OR HARD TOP WITH REMOVABLE CROSSBARS
- DURABLE 2-STAGE LIGHT TEXTURED BLACK POWDER COAT FINISH
- DYNAMIC RATING OF 350LB AND STATIC RATING OF 700LB
- SIMPLE BOLT ON INSTALLATION WITH ALL BA BUMPERS
- FITS FACTORY BUMPERS WITH SLIGHT MODIFICATIONS
- 4 FRONT LIGHT TABS AND 2 REAR LIGHT TABS
- 3 YEAR FINISH/LIMITED LIFETIME WARRANTY
- CONSTRUCTED OF 2 ".120 WALL STEEL TUBE
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2011 | Jeep | Wrangler | Unlimited 70th Anniversary |
| 2016 | Jeep | Wrangler | Unlimited 75th Anniversary |
| 2007-2017 | Jeep | Wrangler | Unlimited Rubicon |
| 2007-2017 | Jeep | Wrangler | Unlimited Sahara |
| 2010-2017 | Jeep | Wrangler | Unlimited Sport |
| 2016 | Jeep | Wrangler | Unlimited Sport S |
| 2007-2010 | Jeep | Wrangler | Unlimited X |
| 2018 | Jeep | Wrangler JK | Unlimited Rubicon |
| 2018 | Jeep | Wrangler JK | Unlimited Sahara |
| 2018 | Jeep | Wrangler JK | Unlimited Sport |
| 2018 | Jeep | Wrangler JK | Unlimited Sport S |
$127.00
This rack offers multiple bed mount options, including no-drill rail clamps, a drill mounting plate, and an optional utility track mount kit (PN: TK-6128). It supports a static weight of 800 lbs and a dynamic weight of 350 lbs. The rack includes two accessory mounts, with additional mounts available (PN: TK-6127). Tent mounts are compatible with the Sky Ridge Series RTT and most universal RTTs.
Installation Instructions- Two-Stage Coating Finished In A Light Texture Powder Coat
- Roof Rack Mounting Brackets For (5160 Rack)
- Mounting Brackets For Jeep JK (JK-6121)
- Fits Both 2 Door and 4 Door Models
- Weight Capacity 150 Lbs.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2011 | Jeep | Wrangler | 70th Anniversary |
| 2016 | Jeep | Wrangler | 75th Anniversary |
| 2007-2017 | Jeep | Wrangler | Rubicon |
| 2007-2017 | Jeep | Wrangler | Sahara |
| 2010-2017 | Jeep | Wrangler | Sport |
| 2016 | Jeep | Wrangler | Sport S |
| 2011 | Jeep | Wrangler | Unlimited 70th Anniversary |
| 2016 | Jeep | Wrangler | Unlimited 75th Anniversary |
| 2007-2017 | Jeep | Wrangler | Unlimited Rubicon |
| 2007-2017 | Jeep | Wrangler | Unlimited Sahara |
| 2010-2017 | Jeep | Wrangler | Unlimited Sport |
| 2016 | Jeep | Wrangler | Unlimited Sport S |
| 2007-2010 | Jeep | Wrangler | Unlimited X |
| 2007-2010 | Jeep | Wrangler | X |
| 2018 | Jeep | Wrangler JK | Rubicon |
| 2018 | Jeep | Wrangler JK | Sahara |
| 2018 | Jeep | Wrangler JK | Sport |
| 2018 | Jeep | Wrangler JK | Sport S |
| 2018 | Jeep | Wrangler JK | Unlimited Rubicon |
| 2018 | Jeep | Wrangler JK | Unlimited Sahara |
| 2018 | Jeep | Wrangler JK | Unlimited Sport |
| 2018 | Jeep | Wrangler JK | Unlimited Sport S |
$509.95
ARB's BASE Rack mount kit for the Land Cruiser 250 uses proven attachment methods to keep the roof rack as close as practical to the vehicle roof. It includes a wind deflector and idoesn't impede the rear OE mounted antenna. BASE Rack specific blade brackets suit the 72 x47 (PN 1770010 OR 72x51 (PN 1770030) BASE Racks. By incorporating a dovetail extrusion around both the full perimeter and along each edge of the internal beams, the BASE Rack provides endless mounting and attachment options. Adding, removing and repositioning accessories and roof loads is quick and easy with the BASE Rack's dovetail system, making it easier to install and remove individual items without disturbing the whole load. Plus, unlike traditional roof rack channels, the BASE Rack dovetail extrusion won't collect dust and debris. Each BASE Rack accessory or fixture attaches to the rack with a simple clamp mount, including larger hardware such as Hi-Lift Jack mounts, rollers, recovery boards and even a BASE Rack custom light bar.
Installation InstructionsWarranty
- The wind deflector mounted to the underside of the rack results in a quiet driving experience
- Mount Kit compatible with 72x47 (PN 1770010) in OR 72x51 in BASE Rack (PN 1770030)
- Vehicle-specific mounting hardware for Toyota Landcruiser 250 & Lexus GX 550
- Compatible with fitment of ARB Roof Rack LED light bar (PN 1780500)
- Mounting hardware attach to OE factory points in the vehicle roof
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2025 | Lexus | GX550 | Luxury |
| 2024-2025 | Lexus | GX550 | Overtrail |
| 2024-2025 | Lexus | GX550 | Premium |
| 2024-2025 | Toyota | Land Cruiser | 1958 |
| 2024-2025 | Toyota | Land Cruiser | Base |
$145.00
An ARB BASE Rack specific deflector has been developed for the Toyota FJ Cruiser to suit the 84x51in BASE Rack (PN 1770040) with BASE Rack Mount Kit PN 17920020. The ARB BASE Rack takes accessories and cargo loading to a whole new level of simplicity, speed and personalization. With a choice of sizes, accessories and attachments, you can truly Make It Your Own. By incorporating a dovetail extrusion around both the full perimeter and along each edge of the internal beams, the BASE Rack provides endless mounting and attachment options. Adding, removing and repositioning accessories and roof loads is quick and easy with the BASE Rack's dovetail system, making it easier to install and remove individual items without disturbing the whole load. Plus, unlike traditional roof rack channels, the BASE Rack dovetail extrusion won't collect dust and debris. Each BASE Rack accessory or fixture attaches to the rack with a simple clamp mount, including larger hardware such as Hi-Lift(TM) Jack mounts, rollers, recovery boards and even a BASE Rack custom light bar.
WarrantyInstallation Instructions
- Pre-cut Slots to Aid Fitment of Front-mounted Roof Rack Light Bar
- Press-form shape provides strength and aids noise reduction
- Significantly Reduces Wind Noise Associated with Roof Racks
- Significantly Reduces Wind Noise Associated w/Roof Racks
- Manufactured from 2mm press-formed aluminum
- Integrit Textured Black Finish
- Durable Powder-coat Finish
- Vehicle-Specific Design
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2007-2014 | Toyota | FJ Cruiser | Base |
| 2008 | Toyota | FJ Cruiser | Trail Teams Special Edition |
| 2007 | Toyota | FJ Cruiser | TRD Special Edition |
$350.00
Using the proven attachment methods from ARB's classic style roof racks as the basis, a BASE Rack specific mount kit has been developed for the Toyota FJ Cruiser. BASE Rack specific blade brackets have been developed to suit the 84x51in (PN 1770040) BASE Rack. By incorporating a dovetail extrusion around both the full perimeter and along each edge of the internal beams, the BASE Rack provides endless mounting and attachment options. Adding, removing and repositioning accessories and roof loads is quick and easy with the BASE Rack's dovetail system, making it easier to install and remove individual items without disturbing the whole load. Plus, unlike traditional roof rack channels, the BASE Rack dovetail extrusion won't collect dust and debris. Each BASE Rack accessory or fixture attaches to the rack with a simple clamp mount, including larger hardware such as Hi-Lift(TM) Jack mounts, rollers, recovery boards and even a BASE Rack custom light bar.
WarrantyInstallation Instructions
- Compatible with fitment of ARB Roof Rack LED light bar PN 1780500
- Compatible w/Fitment Of Roof Rack LED Light Bar [PN 1780500]
- Mount feet attach to OE factory points in the vehicle roof
- Mount kit compatible with 84x51in BASE Rack (PN 1770040)
- Vehicle-specific mounts for Toyota FJ Cruiser
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2007-2014 | Toyota | FJ Cruiser | Base |
| 2008 | Toyota | FJ Cruiser | Trail Teams Special Edition |
| 2007 | Toyota | FJ Cruiser | TRD Special Edition |
$484.00
ARB's BASE Rack mount kit for the Land Cruiser 200 Series uses proven attachment methods to keep the roof rack as close as practical to the vehicle. It includes a wind deflector and is compatible with the rear OE mounted antenna. BASE Rack specific blade brackets suit the 84 x 51 in (PN 1770040) BASE Rack. By incorporating a dovetail extrusion around both the full perimeter and along each edge of the internal beams, the BASE Rack provides endless mounting and attachment options. Adding, removing and repositioning accessories and roof loads is quick and easy with the BASE Rack's dovetail system, making it easier to install and remove individual items without disturbing the whole load. Plus, unlike traditional roof rack channels, the BASE Rack dovetail extrusion won't collect dust and debris. Each BASE Rack accessory or fixture attaches to the rack with a simple clamp mount, including larger hardware such as Hi-Lift(TM) Jack mounts, rollers, recovery boards and even a BASE Rack custom light bar.
WarrantyInstallation Instructions
- Compatible with ARB Roof Rack LED light bar (PN 1780500) either in conjunction with the deflector, or the light bar can be mounted in place of the deflector
- Included wind deflector is manufactured from powder-coated, press formed 1.6mm aluminum
- Mount feet attach to original equipment factory points in the vehicle roof
- Full functionality of sunroof retained when BASE Rack fitted
- Vehicle-specific mounts for Toyota Land Cruiser 200 Series
- Full Functionality Of Sunroof Retained When Rack Fitted
- Compatible with the rear OE mounted antenna
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2008-2011,2013-2021 | Toyota | Land Cruiser | Base |
| 2020-2021 | Toyota | Land Cruiser | Heritage Edition |
$134.00
The ARB Base Rack wind deflector reduces noise and is manufactured from powder-coated press formed 2.0mm aluminum. The BASE Rack takes accessories and cargo loading to a whole new level of simplicity, speed and personalization. With a choice of sizes, accessories and attachments, you can truly Make It Your Own. By incorporating a dovetail extrusion around both the full perimeter and along each edge of the internal beams, the BASE Rack provides endless mounting and attachment options. Adding, removing and repositioning accessories and roof loads is quick and easy with the BASE Rack's dovetail system, making it easier to install and remove individual items without disturbing the whole load. Plus, unlike traditional roof rack channels, the BASE Rack dovetail extrusion won't collect dust and debris. Each BASE Rack accessory or fixture attaches to the rack with a simple clamp mount, including larger hardware such as Hi-Lift(TM) Jack mounts, rollers, recovery boards and even a BASE Rack custom light bar.
WarrantyInstallation Instructions
- Includes wind deflector manufactured from powder-coated press formed 1.6mm aluminum
- Dovetail Accessory Attachment Allows Easy, One-Handed Attachment
- Fully Assembled, Ready-to-Fit Mount Brackets (Sold Separately)
- Provision To Easily Run Wiring Within The BASE Rack Assembly
- Strength Through Design Requires No Additional Cross Bars
- Extruded Aluminum Beams Feature Rigid Internal Bracing
- Fully Welded Construction (Excluding Corner Caps)
- Integrit Textured Black Powder-Coat Finish
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1995 | Land Rover | Range Rover | 25th Anniversary Edition |
| 1988 | Land Rover | Range Rover | 40th Anniversary Edition |
| 1987-1992 | Land Rover | Range Rover | Base |
| 1989-1990,1992-1994 | Land Rover | Range Rover | County |
| 1995 | Land Rover | Range Rover | County Classic |
| 1993-1995 | Land Rover | Range Rover | County LWB |
| 1991 | Land Rover | Range Rover | County SE |
| 1991 | Land Rover | Range Rover | Great Divide |
| 1989,1991 | Land Rover | Range Rover | Hunter |
| 1992 | Land Rover | Range Rover | LSE |
| 1993 | Land Rover | Range Rover | Sport |
| 1980-1997 | Toyota | Land Cruiser | Base |
$90.00
The BASE Rack takes accessories and cargo loading to a whole new level of simplicity, speed and personalization. One of the most versatile BASE Rack accessories, the Alloy Block Set Nut and Bolt Kit is a set of four powder-coated aluminum blocks that attach to the dovetail on any location of the BASE Rack. Configure your BASE Rack for about any cargo load with these must-have attachments. By incorporating a dovetail extrusion around both the full perimeter and along each edge of the internal beams, the BASE Rack provides endless mounting and attachment options. Adding, removing and repositioning accessories and roof loads is quick and easy with the BASE Rack's dovetail system, making it easier to install and remove individual items without disturbing the whole load. Plus, unlike traditional roof rack channels, the BASE Rack dovetail extrusion won't collect dust and debris.
WarrantyInstallation Instructions
- Can Attach To The Dovetail On Any Location Of The BASE Rack
- Powder-coated aluminum blocks
- Supplied as a set of four
$68.95
The ARB Auxilliary Light includes a unique ARB BASE Rack bracket, over molded DT connector suitable for BASE Rack channelling, an additional DT connector for custom wiring, and a scene lighting beam to reduce hot spots in beam output and reduce glare for reverse cameras.The unique ARB BASE Rack bracket provides the ability for installation to any part of the BASE Rack's dovetail system. It can be wired to provide additional aux lighting around the vehicle for camping, working, or reverse lighting. Being compact at 2.8 x 2.21 inches, it allows for mounting in close-fitting areas and along the edge of the BASE Rack to minimize damage on tight roads and close parking. Its compact size further provides a sleek look and allows for a stealthy configuration. The two 10W OSRAM LEDs (20W total) provide intense lighting that spreads over a larger area than standard auxiliary lights, making the beam a true area light and minimizing hot spots from focused beams. Reduction of hot spots translates to clear images being sent through your reverse camera system when used at night or in dim environments as well as clear, not glaring lighting around the camp or worksite. Included with the ARB BASE Rack Auxiliary Light is 1 x 20W LED Light, 1 x Bracket to suit the ARB BASE Rack or Classic Racks, and both Male and Female DT connectors.
Warranty- Compact design allows for mounting in close-fitting areas and along the edge of the rack to minimize damage on tight roads
- Scene lighting beam to reduce hot spots in beam output and reduce glare for reverse cameras
- Easily install on any part of the BASE Rack's dovetail mounting system
- Sleek, minimal design results in a stealthy configuration
- BASE Rack brackets and DT connectors included
- 2.8 in. Auxiliary Light 20W
- 20W power consumption/1.5A
- 1,100 Lumens @ 5700K
- 9v to 36v input
$41.00
The BASE Rack takes accessories and cargo loading to a whole new level of simplicity, speed and personalization. Providing a strong, versatile attachment point, the BASE Rack Narrow Horizontal Mount is suitable for mounting small items up to 6.6lb per bracket such as work lights, communication accessories or solar panels. Each kit includes two powder-coated steel brackets that attach to the dovetail horizontally on any location of the BASE Rack. By incorporating a dovetail extrusion around both the full perimeter and along each edge of the internal beams, the BASE Rack provides endless mounting and attachment options. Adding, removing and repositioning accessories and roof loads is quick and easy with the BASE Rack's dovetail system, making it easier to install and remove individual items without disturbing the whole load. Plus, unlike traditional roof rack channels, the BASE Rack dovetail extrusion won't collect dust and debris.
WarrantyInstallation Instructions
- Suitable for mounting small items up to 6.6lb per bracket including work lights, communication accessories, solar panels
- Provides a strong, versatile, horizontal attachment point to your BASE Rack
- Includes two brackets and fasteners for attachment to BASE Rack
- Includes Two Brackets/Fasteners For Attachment To BASE Rack
- Can attach to the dovetail on any location of the BASE Rack
- Brackets made from strong powder-coated steel
$62.00
The BASE Rack takes accessories and cargo loading to a whole new level of simplicity, speed and personalization. Adding to its broad range of attachment options, the Wide BASE Rack Bridge Plate is ideal for mounting communication accessories, sand flags, some beacons, Rotopax (with 1780610 Alloy Block Set) and round driving lights (with 1780610). Its two powder-coated steel brackets attach between cross beams and can be used as a clamped pair or mounted individually using PN 1780610 alloy blocks. By incorporating a dovetail extrusion around both the full perimeter and along each edge of the internal beams, the BASE Rack provides endless mounting and attachment options. Adding, removing and repositioning accessories and roof loads is quick and easy with the BASE Rack's dovetail system, making it easier to install and remove individual items without disturbing the whole load. Plus, unlike traditional roof rack channels, the BASE Rack dovetail extrusion won't collect dust and debris.
WarrantyInstallation Instructions
- Suitable for mounting aerials, sand flags, some beacons, Rotopax (with 1780610) and round driving lights (with 1780610)
- Can be used as a clamped pair or mounted individually using PN 1780610 alloy blocks
- Includes Two Brackets And Fasteners For Clamp Mounting
- Brackets made from strong powder-coated steel
- Mounts between cross beams of BASE Rack
$51.00
The BASE Rack takes accessories and cargo loading to a whole new level of simplicity, speed and personalization. Adding to its broad range of attachment options, the Narrow BASE Rack Bridge Plate is ideal for mounting roof top tents. Its four powder-coated steel brackets attach between cross beams to securely affix a tent but keep install and removal quick and easy. By incorporating a dovetail extrusion around both the full perimeter and along each edge of the internal beams, the BASE Rack provides endless mounting and attachment options. Adding, removing and repositioning accessories and roof loads is quick and easy with the BASE Rack's dovetail system, making it easier to install and remove individual items without disturbing the whole load. Plus, unlike traditional roof rack channels, the BASE Rack dovetail extrusion won't collect dust and debris.
WarrantyInstallation Instructions
- Can be used as a clamped pair or mounted individually using PN 1780610 alloy blocks
- Includes Four Brackets And Fasteners For Clamp Mounting
- Brackets made from strong powder-coated steel
- Mounts between cross beams of BASE Rack
- Ideal for mounting roof top tents
$35.95
The BASE Rack takes accessories and cargo loading to a whole new level of simplicity, speed and personalisation. With a choice of sizes, accessories and attachments, you can truly Make It Your Own. By incorporating a dovetail extrusion around both the full perimeter and along each edge of the internal beams, the BASE Rack provides endless mounting and attachment options. Adding, removing and repositioning accessories and roof loads is quick and easy with the BASE Rack's dovetail system, making it easier to install and remove individual items without disturbing the whole load. Plus, unlike traditional roof rack channels, the BASE Rack dovetail extrusion won't collect dust and debris. Each BASE Rack accessory or fixture attaches to the rack with a simple clamp mount, including larger hardware such as Hi-Lift(TM) Jack mounts, rollers, recovery boards and even a BASE Rack custom light bar.
Warranty- Attach To BASE Rack Dovetail Without Additional Attachment Point
- 440lbs Lashing Capacity To AS/NZS 4380:2001
- 1 in. x 118 in. Polyester Webbing Straps
- Supplied as a Pair 2 in a Carry Bag
$54.00
The BASE Rack takes accessories and cargo loading to a whole new level of simplicity, speed and personalisation. With a choice of sizes, accessories and attachments, you can truly Make It Your Own. By incorporating a dovetail extrusion around both the full perimeter and along each edge of the internal beams, the BASE Rack provides endless mounting and attachment options. Adding, removing and repositioning accessories and roof loads is quick and easy with the BASE Rack's dovetail system, making it easier to install and remove individual items without disturbing the whole load. Plus, unlike traditional roof rack channels, the BASE Rack dovetail extrusion won't collect dust and debris. Each BASE Rack accessory or fixture attaches to the rack with a simple clamp mount, including larger hardware such as Hi-Lift(TM) Jack mounts, rollers, recovery boards and even a BASE Rack custom light bar.
WarrantyInstallation Instructions
- Pros [Product-Specific Mounting Hardware Sold Separately]
- Can Attach To The Dovetail Track At Any Point On The Rack
- Allows Easy Fitment Of Recovery Tracks To The BASE Rack
- Pros Product-specific Mounting Hardware Sold Separately
- To Be Used With Track Manufacturers Mounting Hardware
- Made From Strong Corrosion-Resistant Steel
- Suitable For Use With MaxTrax And ARB TRED
$75.00
The BASE Rack takes accessories and cargo loading to a whole new level of simplicity, speed and personalisation. With a choice of sizes, accessories and attachments, you can truly Make It Your Own. By incorporating a dovetail extrusion around both the full perimeter and along each edge of the internal beams, the BASE Rack provides endless mounting and attachment options. Adding, removing and repositioning accessories and roof loads is quick and easy with the BASE Rack's dovetail system, making it easier to install and remove individual items without disturbing the whole load. Plus, unlike traditional roof rack channels, the BASE Rack dovetail extrusion won't collect dust and debris. Each BASE Rack accessory or fixture attaches to the rack with a simple clamp mount, including larger hardware such as Hi-Lift(TM) Jack mounts, rollers, recovery boards and even a BASE Rack custom light bar.
WarrantyInstallation Instructions
- Can Attach To The Dovetail Track Anywhere On The Perimeter
- Mounts The Farm Jack To Bracket With Forged Eye Nuts
- Allows Easy Fitment Of Farm Jack Onto The Base Rack
- Made From Strong Corrosion-Resistant Steel
- Rubber Handle Keeper Included
$76.00
Easily store your shovel or spade on your BASE Rack with this rattle free mount. With the innovative dovetail extrusion, you can quickly attach the mount into any of the four unique mounting positions. This lockable solution uses a flip open, quick release system with high clamping force and ease and speed of use. The mount is UV stable and stands up to the harshest environments.
WarrantyInstallation Instructions
- Packer system improves fit of tapered handles and larger size handles
- Position brackets up or down and clamps on top or below the bracket
- Mounting brackets made from powder-coated stainless steel
- Flip down design is suitable for both shovels and spades
- Suitable for 32-42mm (1.25-1.625 ) handle diameters
- Quick release system is fixed when not in use
- Retaining knob non-removable, can't be lost
- Lockable with long shank padlock
- Weight Capacity 5kg/11lbs
$60.00
The BASE Rack takes accessories and cargo loading to a whole new level of simplicity, speed and personalisation. With a choice of sizes, accessories and attachments, you can truly Make It Your Own. By incorporating a dovetail extrusion around both the full perimeter and along each edge of the internal beams, the BASE Rack provides endless mounting and attachment options. Adding, removing and repositioning accessories and roof loads is quick and easy with the BASE Rack's dovetail system, making it easier to install and remove individual items without disturbing the whole load. Plus, unlike traditional roof rack channels, the BASE Rack dovetail extrusion won't collect dust and debris. Each BASE Rack accessory or fixture attaches to the rack with a simple clamp mount, including larger hardware such as Hi-Lift(TM) Jack mounts, rollers, recovery boards and even a BASE Rack custom light bar.
WarrantyInstallation Instructions
- Bracket Inverts For Lower Mounting Position And Extra Height
- Fixed And Quick-Release Awning Brackets Available
- Attach To The Perimeter Of Rack On The Dovetail
- Powder-Coated Steel Brackets
$100.00
The BASE Rack takes accessories and cargo loading to a whole new level of simplicity, speed and personalisation. With a choice of sizes, accessories and attachments, you can truly Make It Your Own. By incorporating a dovetail extrusion around both the full perimeter and along each edge of the internal beams, the BASE Rack provides endless mounting and attachment options. Adding, removing and repositioning accessories and roof loads is quick and easy with the BASE Rack's dovetail system, making it easier to install and remove individual items without disturbing the whole load. Plus, unlike traditional roof rack channels, the BASE Rack dovetail extrusion won't collect dust and debris. Each BASE Rack accessory or fixture attaches to the rack with a simple clamp mount, including larger hardware such as Hi-Lift(TM) Jack mounts, rollers, recovery boards and even a BASE Rack custom light bar.
WarrantyInstallation Instructions
- Ratchet Strap And Eye Nut Tie-Down Bolts Secure The Bottle
- Holder Accepts Gas Bottle Sizes From 5Lb Up To 20Lb
- Adjustable Stainless Steel Locking Brackets
$39.00
The BASE Rack takes accessories and cargo loading to a whole new level of simplicity, speed and personalisation. With a choice of sizes, accessories and attachments, you can truly Make It Your Own. By incorporating a dovetail extrusion around both the full perimeter and along each edge of the internal beams, the BASE Rack provides endless mounting and attachment options. Adding, removing and repositioning accessories and roof loads is quick and easy with the BASE Rack's dovetail system, making it easier to install and remove individual items without disturbing the whole load. Plus, unlike traditional roof rack channels, the BASE Rack dovetail extrusion won't collect dust and debris. Each BASE Rack accessory or fixture attaches to the rack with a simple clamp mount, including larger hardware such as Hi-Lift(TM) Jack mounts, rollers, recovery boards and even a BASE Rack custom light bar.
WarrantyInstallation Instructions
- Fixed And Quick-Release Awning Brackets Available
- Attach To The Perimeter Of Rack On The Dovetail
- Can Fit Anywhere On Dovetail
- Powder-Coated Steel Brackets
$45.00
The BASE Rack takes accessories and cargo loading to a whole new level of simplicity, speed and personalisation. With a choice of sizes, accessories and attachments, you can truly Make It Your Own. By incorporating a dovetail extrusion around both the full perimeter and along each edge of the internal beams, the BASE Rack provides endless mounting and attachment options. Adding, removing and repositioning accessories and roof loads is quick and easy with the BASE Rack's dovetail system, making it easier to install and remove individual items without disturbing the whole load. Plus, unlike traditional roof rack channels, the BASE Rack dovetail extrusion won't collect dust and debris. Each BASE Rack accessory or fixture attaches to the rack with a simple clamp mount, including larger hardware such as Hi-Lift(TM) Jack mounts, rollers, recovery boards and even a BASE Rack custom light bar.
WarrantyInstallation Instructions
- Allows Fitment Of Existing T-Slot Compatible Accessories
$23.00
The BASE Rack takes accessories and cargo loading to a whole new level of simplicity, speed and personalisation. With a choice of sizes, accessories and attachments, you can truly Make It Your Own. By incorporating a dovetail extrusion around both the full perimeter and along each edge of the internal beams, the BASE Rack provides endless mounting and attachment options. Adding, removing and repositioning accessories and roof loads is quick and easy with the BASE Rack's dovetail system, making it easier to install and remove individual items without disturbing the whole load. Plus, unlike traditional roof rack channels, the BASE Rack dovetail extrusion won't collect dust and debris. Each BASE Rack accessory or fixture attaches to the rack with a simple clamp mount, including larger hardware such as Hi-Lift(TM) Jack mounts, rollers, recovery boards and even a BASE Rack custom light bar.
WarrantyInstallation Instructions
- Allows Fitment Of Existing T-Slot Compatible Accessories
$22.95
The BASE Rack takes accessories and cargo loading to a whole new level of simplicity, speed and personalisation. With a choice of sizes, accessories and attachments, you can truly Make It Your Own. By incorporating a dovetail extrusion around both the full perimeter and along each edge of the internal beams, the BASE Rack provides endless mounting and attachment options. Adding, removing and repositioning accessories and roof loads is quick and easy with the BASE Rack's dovetail system, making it easier to install and remove individual items without disturbing the whole load. Plus, unlike traditional roof rack channels, the BASE Rack dovetail extrusion won't collect dust and debris. Each BASE Rack accessory or fixture attaches to the rack with a simple clamp mount, including larger hardware such as Hi-Lift(TM) Jack mounts, rollers, recovery boards and even a BASE Rack custom light bar.
Warranty- Simple Half-Turn Fits Or Removes Anywhere Along The Dovetail
- Quick-Release Tie-Downs Store In Vehicle When Not In Use
- Supplied As A Set Of Two 1 Pair
- Made From Stainless Steel
- 440Lbs Lashing Capacity
- 440lb Lashing Capacity
$167.00
Get ready for ultimate overlanding with this adventure kit. It includes a Narrow Bridge Plate to secure your roof top tent under the stars, and a Quick-Release Awning Bracket for easy use of your vehicle with or without the awning affixed. Additional cargo is easily secured to the BASE Rack with the included set of Eye Bolt Tie Downs that mount to any edge of the BASE Rack's versatile dovetail track.
- Quick-Release Awning Bracket allows your awning to be removed from the rack in no time. The powder-coated steel brackets attach to the perimeter of the dovetail track and offer flexibility in mounting with a ?high' and ?low' position.
- Eye Bolt Tie Downs supplied as a set of four, are comprised of forged steel eye nuts and powder-coated aluminum blocks, they provide 440lb lashing capacity and can fit anywhere on the dovetail extrusion.
- Narrow Bridge Plate is ideal for mounting roof top tents. Its four powder-coated steel brackets attach between cross beams to securely affix a tent but keep install and removal quick and easy.
- Mounts are easy to attach, detach and rearrange on the BASE Rack.
- Eye Bolt Tie Downs Supplied As A Set Of Four
$85.00
With the essentials you need to get out there, the BASE Rack Starter Kit makes attaching standard items like bags and gear quick and easy. The mounts attach to the rack's dovetail track at any edge creating endless cargo configurations. Spring Loaded Tie Downs offer loads of flexibility and can clip on one-handed while arranging straps and cargo. Eye Bolt Tie Downs stay securely on the BASE Rack when not in use.
- Spring Loaded Tie Downs supplied as a set of two, are made from stainless steel, they provide 440lb lashing capacity and allow simple one-handed operation for quick loading and unloading.
- Eye Bolt Tie Downs supplied as a set of four, are comprised of forged steel eye nuts and powder-coated aluminum blocks, they provide 440lb lashing capacity.
- Easy to attach, detach and rearrange on the BASE Rack, can attach to the dovetail track at any point on the rack for endless mounting options.
- Spring Loaded Tie Downs are designed to be taken off rack when not in use by a simple half turn.
- Eye Bolt Tie Downs stay securely on the BASE Rack when not in use.
- Eye Bolt Tie Downs provide a lashing point for ratchet straps.
- Easy To Attach/Detach And Rearrange On The BASE Rack
$79.95
The BASE Rack takes accessories and cargo loading to a whole new level of simplicity, speed and personalisation. With a choice of sizes, accessories and attachments, you can truly Make It Your Own. By incorporating a dovetail extrusion around both the full perimeter and along each edge of the internal beams, the BASE Rack provides endless mounting and attachment options. Adding, removing and repositioning accessories and roof loads is quick and easy with the BASE Rack's dovetail system, making it easier to install and remove individual items without disturbing the whole load. Plus, unlike traditional roof rack channels, the BASE Rack dovetail extrusion won't collect dust and debris. Each BASE Rack accessory or fixture attaches to the rack with a simple clamp mount, including larger hardware such as Hi-Lift(TM) Jack mounts, rollers, recovery boards and even a BASE Rack custom light bar.
WarrantyInstallation Instructions
- Supplied As A Set Of Four 2 Pairs
- Powder-Coated Aluminum Blocks
- Can Fit Anywhere On Dovetail
- 440lb Lashing Capacity
- Forged Steel Eye Nuts
Showing 60/67
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.