The BASE Rack takes accessories and cargo loading to a whole new level of simplicity, speed and personalisation. With a choice of sizes, accessories and attachments, you can truly Make It Your Own. By incorporating a dovetail extrusion around both the full perimeter and along each edge of the internal beams, the BASE Rack provides endless mounting and attachment options. Adding, removing and repositioning accessories and roof loads is quick and easy with the BASE Rack's dovetail system, making it easier to install and remove individual items without disturbing the whole load. Plus, unlike traditional roof rack channels, the BASE Rack dovetail extrusion won't collect dust and debris. Each BASE Rack accessory or fixture attaches to the rack with a simple clamp mount, including larger hardware such as Hi-Lift(TM) Jack mounts, rollers, recovery boards and even a BASE Rack custom light bar.

• Supplied As A Set Of Four 2 Pairs
• Powder-Coated Aluminum Blocks
• Can Fit Anywhere On Dovetail
• 440lb Lashing Capacity
• Forged Steel Eye Nuts

The BASE Rack takes accessories and cargo loading to a whole new level of simplicity, speed and personalisation. With a choice of sizes, accessories and attachments, you can truly Make It Your Own. By incorporating a dovetail extrusion around both the full perimeter and along each edge of the internal beams, the BASE Rack provides endless mounting and attachment options. Adding, removing and repositioning accessories and roof loads is quick and easy with the BASE Rack's dovetail system, making it easier to install and remove individual items without disturbing the whole load. Plus, unlike traditional roof rack channels, the BASE Rack dovetail extrusion won't collect dust and debris. Each BASE Rack accessory or fixture attaches to the rack with a simple clamp mount, including larger hardware such as Hi-Lift(TM) Jack mounts, rollers, recovery boards and even a BASE Rack custom light bar.

• Fully Assembled Ready-To-Fit Mount Brackets Sold Separately
• Strength Through Design Requires No Additional Cross Bars
• Extruded Aluminum Beams Feature Rigid Internal Bracing
• Fully Welded Construction Excluding Corner Caps
• Integrit Textured Black Powder-Coat Finish

The DV8 Offroad RRTT1-01 Toyota Tacoma roof rack mounts to existing holes in the roof of the Tacoma and accommodates a 45 inch light (Brackets for 40 inch available). This lightweight aluminum rack stays light weight by using sound engineering principles to hold everything together. The sides can accommodate up to four 6 inch slim LED lights for nearly 360 degree lighting. The cross bars can be used to mount nearly anything imaginable, just slide a bolt head into the crossbar from the end and secure the other side with a nut. Details: Light-weight rust free aluminum, No drilling into the roof, Extruded aluminum cross bars, Endless mounting possibilities, Air Deflector Hugs the roof for an integrated look, Sold As: Each.

• Accepts (4) 6" Single Row Led Light Bars (BS6W30W5W)
• Low Profile And Roof Hugging Design
• Accepts 40" Light Bar (B40CE240W3W)
• Front Air Defelctor Included
• 150Lb Static Weight
• 100% Bolt On Design

This Part Fits:

DV8 Off road's Jeep JK 4 Door/JL 2 Door/Gladiator Roof Rack offers utility and ease. With a no drill design, our roof rack gives you the ability to put on or remove the roof rack in minutes. Extending almost the full length of the rain gutter, maximum storage is available. With a weight limit of 200 lbs. evenly distributed, you can toss all your camping gear that doesn't fit into the Jeep on top! Details: 1/8 inch Thick Steel, Tie down Points on all Sides, 100 percent Bolt-on design, Noise Reduced Design

• Tie Down Points On All Sides
• 200Lb Static Weight
• 100% Bolt On Design
• 65"L X 54"W X 4"H

This Part Fits:

DV8 Off road's 4 Door JL Roof Rack offers utility and ease. With a no drill design, our roof rack gives you the ability to put on or remove the roof rack in minutes. Extending almost the full length of the JL, maximum storage is available. With a weight limit of 200 lbs. evenly distributed, you can toss all your camping gear that doesn't fit into the Jeep, on top! Details: 1/8 inch Thick Steel, Tie down Points on all Sides, 100 percent Bolt-on design, Noise Reduced Design.

• Tie Down Points On All Sides
• 200Lb Static Weight
• 100% Bolt On Design
• 86"L X 54"W X 4"H

This Part Fits:

Constructed from 2mm & 3mm plate steel, it was finished in a micro-texture black powder coat to resist the elements. It features multiple mounting points for increased strength, and arcd cross bars for increased cargo capacity. No drilling or modifications are necessary, as it features a bolt-on installation.

• Accessory Mounting Points Atop All 4 Side Rails
• Micro-Texture Black Powder Coat Finish
• 300 lb Capacity Evenly Distributed
• Mounts Directly to Rain Gutters
• Tie Down Points on all Sides
• No Drilling Required
• Bolt-On Installation

This Part Fits:

Bolt-on grab handles designed for use with DV8 Offroad roof racks. Provides a secure handhold when loading or unloading gear. Each handle includes hook points for tie-down straps and M6 slots for accessory mounting. Accepts one Micro Elite Utility Light per handle for added side lighting (light not included). Finished in a durable micro-texture black powder coat. Sold as a pair.

• Accepts (1) Micro Elite Utility Light per handle for side lighting (not included)
• M6 slots on the handle face that can be used for mounting accessories
• Provides a handle while loading/unloading gear from DV8 roof racks
• Compatible with DV8 Offroad Roof Racks & other racks
• Provided hook points for tie down straps
• Micro-Texture Black Powder Coat Finish
• Laser logo plate (optional)
• Sold as a pair

Billet aluminum utility handles designed for use on DV8 roof racks and overhead MOLLE panels. Provides a solid grab handle for loading and unloading gear and functions as a cleat-style tie-down point for cargo rope or straps. CNC-machined with a laser-etched logo and includes 12.9-grade mounting hardware. An optional molle mounting plate is included for additional utility. Compatible with any M8 or M10 1.5" long slot found on many roof racks and aftermarket mounting systems. Sold as a pair.

• Optional molle mounting plate provided to be used to secure rope, hoses and other items similar to a boat cleat
• Can be mounted to any M8/M10 1.5" long slot found on many roof racks and other aftermarket products
• Provides a strong handle while loading/unloading gear on DV8 roof rack
• Provides a grab handle when installed on our overhead molle panels
• Cleat-style design to offer a secure mounting point for cargo
• Comes with 12.9 hardware for strong and secure mounting
• CNC Billet Design with laser-etched logo
• Hook points for tie-down straps