Fits select 1999-2023 Cadillac Escalade, Chevrolet Silverado/Tahoe/Suburban/Avalanche/Colorado, GMC Sierra, Ford F-150/F-250/F-350/Ranger, and Dodge Ram trucks.

Restore the automatic functionality of your retractable running boards with this genuine AMP Research Type A Standard Replacement Controller. As the

Fits 2007-2021 Toyota Tundra CrewMax models across all trim levels including SR, SR5, Limited, Platinum, 1794 Edition, and TRD Pro.

The Go Rhino RB20 Slim Line Running Boards deliver the rugged, Raptor-inspired styling of the original RB series in a more compact, low-profile design. Measuring 5.5 inches at their widest point, these boards sit closer to the vehicle cab than the standard RB20, significantly improving ground clearance for off-road navigation while providing a secure, full-length stepping surface.

Each board is manufactured from heavy-duty 16-gauge zinc-coated galvanized steel for maximum resistance to impact, abrasion, and corrosion. The modern bullet-stamped surface ensures reliable traction in all weather conditions. This complete kit includes all necessary vehicle-specific mounting brackets for a straightforward, no-drill installation on factory mounting points.

• Construction: 16-gauge zinc-coated galvanized steel
• Finish: Textured Black powder coat
• Step Width: 5.5 inches (tapered design)
• Design: Raptor-inspired bullet-stamped platform
• Installation: Bolt-on, no drilling required
• Manufacturer Part Number: 69441687SPC
• Warranty: Limited lifetime on materials/construction; 5-year on finish

Fits 2007-2021 Toyota Tundra Double Cab models (including Base, SR, SR5, TRD Pro, Limited, Platinum, and 1794 Edition).

Go Rhino RB20 Slim Running Boards deliver the same heavy-duty, Raptor-inspired performance as the standard series but in a lower-profile design. Engineered for off-roaders prioritizing ground clearance, these boards sit tighter to the cab while maintaining a 5.5-inch wide stepping surface at the widest point. Each board is constructed from 16-gauge zinc-coated galvanized steel for maximum impact resistance and protection against corrosion and debris.

• Heavy-duty 16-gauge zinc-coated galvanized steel construction
• Slim profile provides increased ground clearance for off-road use
• Modern bullet-stamped design for a non-slip platform and debris drainage
• Durable textured black finish resists corrosion, impact, and abrasion
• Complete kit includes driver and passenger side boards plus mounting brackets
• Easy, no-drill installation using factory mounting points
• Widest point: 5.5 inches (tapers toward the rear)
• Manufacturer Part Number: 69441580SPC

Includes a Limited Lifetime warranty on materials and construction with a 5-year warranty on the Textured Black finish.

Fits select 2009-2025 Dodge/Ram 1500, 2500, and 3500 Crew Cab models. This Go Rhino RB20 Slim Line Running Boards kit offers the same rugged protection as the original RB series but with a lower-profile design for improved ground clearance during off-road use.

Constructed from 16-gauge zinc-coated galvanized steel, these Raptor-inspired boards are engineered to protect your vehicle's rocker panels from road debris and trail obstacles. The modern bullet-stamped platform measures 5.5 inches at its widest point and tapers toward the rear for a streamlined look that stays tight to the cab. The textured black powder coat finish provides superior resistance against corrosion, impact, and abrasion, backed by a dedicated finish warranty.

• Heavy-duty 16-gauge zinc-coated galvanized steel construction
• Slim, 5.5-inch tapered design for increased ground clearance
• Easy, no-drill installation using included mounting brackets
• Raptor-inspired bullet-stamped step surface for secure footing
• Textured black finish for maximum durability

• Manufacturer Part Number: 69410687SPC
• Material: 16-Gauge Galvanized Steel
• Finish: Textured Black
• Width: 5.5 inches (at widest point)
• Warranty: Limited Lifetime on construction; 5-year on finish
• In the box: Driver and passenger side boards, vehicle-specific mounting brackets, and hardware

Fits 2024-2026 Lexus GX550 and Toyota Land Cruiser (1958, Base, First Edition, Premium, Luxury, and Overtrail models).

The Go Rhino RB10 Running Boards bring an aggressive, Raptor-inspired aesthetic to your modern off-roader. Designed for both form and function, these cab-length side steps feature a heavy-duty construction that sits high and tight against the rocker panels to maintain ground clearance during trail use. The wide step surface utilizes a classic louvered design to provide maximum traction in mud, snow, or rain, making them an essential upgrade for both daily utility and off-road adventures.

Built from 16-gauge zinc-coated galvanized steel, the RB10 is engineered for superior corrosion, impact, and abrasion resistance. The welded, boxed-end design adds structural rigidity and a finished look, while the textured black powder coat ensures long-lasting protection. This complete kit (MPN: 63444568PC) includes all necessary mounting brackets and hardware for a straightforward, bolt-on installation that typically requires no drilling.

• Heavy-duty 16-gauge zinc-coated galvanized steel construction
• Aggressive Raptor-inspired louvered step surface for superior grip
• Corrosion-resistant textured black powder coat finish
• Protective boxed-end design for a clean, rugged appearance
• Complete kit includes bars, vehicle-specific brackets, and hardware
• Compatible with optional drop-down steps (sold separately)
• Limited Lifetime warranty on materials; 5-year warranty on finish

Fits select 2018-2025 Jeep Wrangler 4-door (Unlimited) models across Sport, Sahara, Rubicon, 4xe, and 392 trims.

The RealTruck VoltStep Electric Running Board Kit provides a high-clearance, automated entry solution for stock, leveled, or lifted Jeep Wranglers. Engineered with a dual-motor design on each board, this system provides the torque necessary to deploy through heavy snow, slush, and road debris. Unlike many power steps that consume your vehicle's diagnostic port, the VoltStep utilizes hands-free, magnetically-activated door sensors to leave your OBD-II port open for other accessories.

Constructed from lightweight, corrosion-resistant aluminum alloy, the 6-inch wide running boards feature a textured black powder coat for superior grip and durability. For night-time safety, integrated LED lights illuminate the stepping surface when deployed. When the doors close, the boards automatically retract against the rocker panels to preserve ground clearance and maintain the vehicle's clean body lines. The system includes a built-in 'SAFE-STOP' safety sensor to halt deployment if an obstruction is detected, along with an interior bypass switch for manual override.

• Fits 2018-2025 Jeep Wrangler 4-Door models
• Dual electric motors per board for reliable performance in extreme climates
• 6-inch wide anti-slip aluminum stepping surface
• 600 lb. weight capacity per side
• Magnetic door sensors keep the OBD-II port free
• Integrated LED entry lighting
• Textured black powder coat finish with molded nylon end caps
• Drilling required for installation
• Includes vehicle-specific mounting hardware and instructions
• Manufacturer Part Number: 20450674PC

Fits 2020-2025 GMC Sierra 3500 HD Standard Cab trucks (Base, Pro, and SLE).

Gen-Y GH-25007 running boards provide a rugged, dependable step designed for the rigors of heavy-duty use. Constructed from high-strength steel, these steps feature a black powder coat finish for long-term corrosion resistance. The open criss-cross tread pattern is engineered to provide superior anti-slip traction while allowing mud, snow, and debris to pass through the step rather than accumulate on the surface.

• Heavy-duty steel construction for maximum durability
• Rated for a weight capacity of up to 400 lbs
• Criss-cross traction pattern sheds debris for a safer step
• Resilient black powder coat finish
• Specific fitment for Standard Cab configurations
• Made in the USA
• Manufacturer Part Number: GH-25007

Fits select 2015-2025 Ford F-150 and 2017-2024 F-250/F-350 Super Duty Standard Cab models (XL and XLT trims).

The Gen-Y GH-25006 running boards provide a secure, high-traction step designed specifically for the rigors of work and off-road environments. Engineered from heavy-duty steel, these steps feature a unique criss-cross pattern that serves two critical functions: it creates an aggressive anti-slip surface for boots while allowing mud, snow, and debris to fall through rather than accumulating on the board. This self-cleaning design ensures a clear, safe stepping area in all weather conditions.

Finished in a durable black powder coat for superior corrosion resistance, these boards are built to handle a 400 lb. weight rating. Proudly made in the USA, they offer the structural integrity needed for daily use on full-sized Ford trucks.

• Heavy-duty steel construction for maximum durability
• Open criss-cross tread pattern prevents debris buildup and improves grip
• Durable black powder coat finish protects against rust and abrasion
• Rated for up to 400 lbs. capacity
• Specifically designed for Standard Cab (Regular Cab) configurations
• Manufacturer Part Number: GH-25006
• Made in America

Fits 2011-2024 Ram 2500 and 3500 Crew Cab models including Power Wagon, Laramie, Tradesman, and Limited trims.

Improve access to your heavy-duty Ram with the Gen-Y GH-25004 steel running boards. Engineered for maximum durability and safety, these 84-inch steps feature a specialized criss-cross anti-slip pattern. This open design is specifically engineered to let mud, snow, and road debris fall through the step rather than accumulating on the surface, ensuring a clean and secure footing in all weather conditions.

Constructed in America from heavy-duty steel and finished in a resilient black powder coat, these boards are built to withstand the rigors of work and off-road use. They provide a stable 400 lb. weight capacity and bolt directly to the truck for a high-strength installation.

• Manufacturer Part Number: GH-25004
• Construction: Heavy-duty steel
• Finish: Durable black powder coat
• Step Design: Criss-cross anti-slip mesh for debris drainage
• Length: 84 inches
• Weight Capacity: 400 lbs.
• Country of Origin: Made in USA

Fits 2022-2026 Ford F-250 and F-350 Super Duty SuperCrew models (including Sync 4 and regular trim levels).

The AMP Research PowerStep Vision represents the latest evolution in the SmartSeries line, integrating high-output LED lighting directly into the running board profile. Designed for truck owners who demand both functionality and aesthetics, these boards provide a stable, automatic stepping surface that deploys the moment a door is opened. Unlike traditional power steps, the Vision series features full-length LED strips that provide bright white ground illumination when deployed for safety, and switch to customizable, color-accented lighting when retracted.

System management is handled through the AMP Research SmartSeries app on iOS or Android, allowing users to customize lighting colors, brightness, and toggle manual step overrides. Installation is streamlined with a vehicle-specific plug-and-play wiring harness that integrates with the factory electronics without complex splicing. Each set is constructed with premium materials to withstand harsh environments and is backed by a 5-year, 60,000-mile warranty.

• Integrated full-length LED Glow Light system with dual-mode functionality
• Bluetooth connectivity via SmartSeries app for lighting and deployment control
• High-output white illumination for ground safety when steps are deployed
• Customizable color accent lighting when steps are in the retracted position
• Plug-and-play technology with all necessary wiring and mounting hardware included
• Corrosion-resistant finish for long-term durability in all weather conditions
• Manufacturer Part Number: 96242-01A
• Warranty: 5-Year / 60,000 Mile

Fits select 2013-2017 Ram 1500, 2500, and 3500 trucks across all cab configurations. These heavy-duty electric running boards are engineered specifically for vehicles operating in sub-zero winters, mud-caked environments, and demanding work sites.

The AMP Research PowerStep Xtreme (MPN: 78139-01A) features an aggressive, high-traction design built from high-strength, die-cast aluminum. Unlike standard steps, the Xtreme series utilizes dual motors to provide double the power when deploying and retracting, ensuring reliable operation even when the rockers are covered in heavy debris or ice. The boards are finished in a durable, high-texture powder coating to resist corrosion and include integrated LED lights that illuminate the step for safe entry and exit in low-light conditions.

• Dual motors drive the system for increased torque and reliability in extreme conditions
• Aggressive step surface provides maximum traction in snow, mud, and rain
• High-strength, die-cast aluminum alloy components with a black textured finish
• Integrated LED lighting system for improved visibility
• Precision OEM-quality motors, drive system, and wiring harness
• Manufacturer Part Number: 78139-01A
• 5-Year / 60,000 Mile Warranty

Fits 2021-2025 Ford Bronco (Badlands, Base, Big Bend, Black Diamond, Everglades, First Edition, Heritage, Outer Banks, Raptor, and Wildtrak).

The AMP Research XL PowerStep is the premier solution for lifted Ford Broncos, providing a lower stepping surface without sacrificing the vehicle's rugged aesthetic. Unlike standard running boards, these electric-powered steps are integrated into a custom rocker rail, creating a seamless, flush appearance when retracted while offering a 3-inch lower drop than the original PowerStep. This increased drop distance ensures easier and safer access to the cab for drivers and passengers alike.

Built to withstand demanding conditions, the XL PowerStep system is rated to support up to 600 lbs per side. The steps automatically deploy when the doors open and retract when closed, maintaining ground clearance. Integrated LED lights provide enhanced visibility in low-light conditions, illuminating the step and the ground below. Every kit includes the necessary hardware for installation and is backed by a comprehensive 5-year/60,000-mile warranty.

• Automatic electric-powered deployment and retraction
• 3-inch lower stepping surface specifically optimized for lifted trucks
• Integrated rocker rail for a seamless, custom-fit appearance
• Corrosion-resistant black finish
• Integrated LED lighting system for safe entry and exit
• Supports up to 600 lbs per side
• Manufacturer Part Number: 77140-01A
• Includes 5-year/60,000-mile limited warranty

Fits 2024-2026 Ford Ranger (Lariat, Raptor, XL, XLT).

The AMP Research PowerStep XL provides a streamlined entry solution for your vehicle, specifically designed to handle the increased step-in height of lifted trucks. This automatic, electric-powered running board instantly extends when a door is opened, providing a stepping surface that is 3 inches lower than the standard PowerStep. When the doors are closed, the boards retract flush with the body for maximum ground clearance and improved aerodynamics.

Engineered for all-weather performance and long-term reliability, these boards are constructed from high-strength, die-cast aluminum with a textured black finish for superior grip and corrosion resistance. The system includes integrated LED lights to illuminate the stepping surface in low-light conditions and utilizes a plug-and-play wiring harness for a straightforward installation.

• Automatic electric-powered deployment and retraction
• Stepping surface sits 3 inches lower than standard PowerStep models
• 600 lb. weight capacity per side
• Integrated LED lighting system included
• Plug-and-play installation utilizing factory wiring
• Die-cast aluminum components with a durable black finish
• Manufacturer Part Number: 76363-01A
• 5-year/60,000-mile limited warranty

Fits 2009-2014 Ford F-150 models including STX, SVT Raptor, XL, XLT, FX2, FX4, Harley-Davidson, King Ranch, Lariat, and Platinum.

Improve your truck's accessibility without compromising ground clearance or aerodynamics. The AMP Research PowerStep XL is an automatic, electric-powered running board that instantly deploys when a door is opened and retracts out of sight when the doors close. This XL model features a rugged, rail-mounted design that provides a 3-inch lower stepping surface than the standard PowerStep, making it the ideal solution for lifted trucks and those requiring a more ergonomic entry point.

• Automatic Operation: Extends instantly when doors open; retracts when doors close to maintain clean lines and fuel efficiency.
• Plug N Play Installation: Includes a vehicle-specific wiring harness that connects directly to the factory OBD-II port.
• Superior Capacity: High-strength, die-cast aluminum components support up to 600 lbs per side.
• Integrated Lighting: Built-in LED lights provide visibility in low-light conditions for safer entry and exit.
• Durable Finish: Finished in a high-texture black powder coat for maximum corrosion and slip resistance.
• Warranty: Covered by a 5-year/60,000-mile manufacturer warranty.
• Part Number: 76141-01A

Fits 2022-2026 Toyota Tundra Double Cab (SR, SR5, Limited, Platinum, 1794 Edition, Capstone, and TRD Pro).

Westin Pro-e Power Running Boards provide a seamless entry solution for your Toyota Tundra, combining high-tech automation with rugged durability. These boards automatically deploy when any door is opened and retract flush against the rocker panels once the doors close, preserving ground clearance and vehicle lines while protecting the rocker panels from potential debris damage.

Built for the long haul, these 6-inch wide steps are constructed from corrosion-resistant aluminum and finished in a resilient textured black powder coat. Reliability is driven by two IP68-rated waterproof motors per side, ensuring consistent performance in mud, snow, or heavy rain. Integrated LED lights activate upon deployment to illuminate the stepping surface for safer access in low-light conditions.

• Automatic deployment and retraction for easy entry and exit
• Dual waterproof IP68 rated motors per side for maximum reliability
• 6-inch wide durable aluminum step surface with textured black finish
• Total weight capacity of 600 lbs (300 lbs per side)
• Integrated LED entry lights for improved night-time visibility
• No-drill, bolt-on installation with vehicle-specific mounting brackets and hardware included
• Manufacturer Part Number: 29-24235

Fits 2021-2025 Ford Bronco 2-Door models. Westin Pro-e Power Running Boards provide a premium, automated entry solution that maintains your vehicle's sleek profile and ground clearance. Designed for the off-road enthusiast, these 6-inch wide aluminum steps automatically deploy when any door is opened and retract flush against the rocker panels when closed to protect against trail debris.

Each side is powered by two IP68-rated waterproof motors, ensuring reliable operation in mud, snow, and rain. The durable aluminum construction is finished in a textured black powder coat for superior corrosion resistance and grip. Integrated LED lights illuminate the step surface for safety in low-light conditions. Installation is straightforward with vehicle-specific mounting brackets and a bolt-on design that requires no drilling.

• 6-inch wide durable aluminum step surface
• Dual waterproof IP68 rated motors per side
• Automatically deploys and retracts with door operation
• Integrated LED lights for enhanced visibility
• 600 lbs. total weight capacity (300 lbs. per side)
• Textured black powder coat finish over corrosion-resistant aluminum
• Vehicle-specific mounting brackets and hardware included
• No-drill bolt-on installation
• Manufacturer Part Number: 29-24185

Fits select 2019-2026 Chevrolet Silverado 1500, 2500 HD, 3500 HD and GMC Sierra 1500, 2500 HD, 3500 HD.

Simplify vehicle entry and exit with Westin Pro-e Power Running Boards. These electric steps automatically deploy when any door opens and retract flush against the rocker panels when closed, preserving ground clearance and maintaining the vehicle's clean body lines. Engineered for durability, each board features a 6-inch wide corrosion-resistant aluminum stepping surface finished in a rugged textured black powder coat.

To ensure reliable operation in all climates, the Pro-e system is equipped with dual IP68-rated waterproof motors per side. Integrated LED lights activate upon deployment to illuminate the step surface for nighttime safety. This complete kit includes vehicle-specific mounting brackets and hardware for a secure, bolt-on installation with no drilling required.

• 6-inch wide durable aluminum step surface
• Dual waterproof IP68-rated motors per side for maximum reliability
• Automatic deployment and retraction with door operation
• 600 lbs total weight capacity (300 lbs per side)
• Integrated LED lights for enhanced visibility
• Corrosion-resistant aluminum construction
• No-drill, bolt-on installation using included vehicle-specific brackets
• Textured black powder coat finish
• Manufacturer Part Number: 29-24135

Fits 2019-2026 Ram 1500 Crew Cab models (Excludes 2019+ 1500 Classic).

The Westin Pro-e Power Running Boards provide a seamless blend of utility and style for your Ram 1500. These electric steps automatically deploy when any door opens and retract flush against the vehicle body when closed, maintaining a sleek profile while protecting your rocker panels from potential road damage. Constructed from corrosion-resistant aluminum and finished in a durable textured black powder coat, these boards are built to withstand the elements.

Reliability is at the core of the Pro-e design, featuring dual waterproof IP68-rated motors per side to ensure smooth operation in all weather conditions. The 6-inch wide step surface provides a stable platform and includes integrated LED lights to illuminate the boards for safer entry and exit at night. Installation is a clean, bolt-on process using the included vehicle-specific mounting brackets and hardware, requiring no drilling.

• 6-inch wide durable aluminum running boards
• Dual waterproof IP68-rated motors per side (4 motors total)
• Automatic deployment when doors open; smooth retraction when closed
• Integrated LED lights for enhanced step surface visibility
• 600 lbs. total weight capacity (300 lbs. per side)
• Corrosion-resistant aluminum construction
• Durable textured black powder coat finish
• Complete kit includes mounting brackets and hardware
• Manufacturer Part Number: 29-24085

Fits 2015-2026 Chevrolet Colorado and GMC Canyon Crew Cab models.

The Westin Pro-e Power Running Boards offer a sophisticated entry solution that balances accessibility with a clean, integrated aesthetic. These boards automatically deploy when any door is opened, providing a stable 6-inch wide stepping surface, then retract flush against the vehicle body once the doors are closed. This retracted position helps protect your rocker panels from road debris while maintaining optimal ground clearance.

Engineered for longevity in demanding environments, each board is powered by two IP68-rated waterproof motors for reliable operation in rain, snow, or mud. The steps are manufactured from corrosion-resistant aluminum and finished in a durable textured black powder coat. Integrated LED lights are included to illuminate the boards for increased safety in low-light conditions. Installation is a straightforward bolt-on procedure using the included vehicle-specific brackets, requiring no drilling into the vehicle frame or body.

• Manufacturer Part Number: 29-24015
• Step Width: 6 inches
• Weight Capacity: 300 lbs per side (600 lbs total)
• Material: Corrosion-resistant aluminum
• Finish: Textured black powder coat
• Motor Rating: Dual IP68 waterproof motors per side
• Mounting: Vehicle-specific bolt-on brackets (no drilling required)
• Lighting: Integrated LED step lights included

Fits 2015-2026 Ford F-150 (including Lightning) and 2017-2026 Ford F-250/F-350 Super Duty.

Westin Pro-e Power Running Boards provide a premium, automated entry and exit solution for your truck. These steps are engineered to automatically deploy when any door is opened, offering a wide, stable platform, and smoothly retract flush against the vehicle body once doors are closed. This design preserves ground clearance and protects your vehicle's rocker panels from road debris.

Built for long-term reliability in harsh environments, each board is powered by two waterproof IP68-rated motors. The 6-inch wide steps are constructed from corrosion-resistant aluminum and finished in a durable textured black powder coat for superior traction. Integrated LED lights illuminate the stepping surface upon deployment to ensure safety in low-light conditions.

• Automatic deployment and retraction with door operation
• 6-inch wide durable aluminum step surface
• Dual waterproof IP68-rated motors per side for consistent performance
• Integrated LED lighting for enhanced visibility and safety
• Total weight capacity of 600 lbs. (300 lbs. per side)
• Textured black powder coat finish for corrosion resistance
• Bolt-on installation requires no drilling; vehicle-specific brackets included
• Manufacturer Part Number: 29-23945

Fits select 2010-2024 Toyota 4Runner models, including SR5, TRD Pro, TRD Off-Road, Trail, and Venture. These Westin Pro-e Power Running Boards combine automated functionality with a sleek, integrated look that tucks tight against the rocker panels when not in use.

Built for the rigors of daily use and off-road environments, these boards automatically deploy when a door is opened to provide a safe, 6-inch wide stepping surface. When the doors close, the steps smoothly retract to maintain ground clearance and vehicle styling. Each side is powered by two IP68-rated waterproof motors for reliable operation in mud, snow, and heavy rain. Integrated LED lights activate upon deployment to illuminate the step surface for safer entry and exit at night.

• Construction: Corrosion-resistant aluminum with textured black powder coat finish
• Step Width: 6 inches for maximum stability
• Capacity: 600 lbs. total (300 lbs. per side)
• Motor Rating: Dual IP68-rated waterproof motors per side
• Installation: No-drill, bolt-on installation using vehicle-specific mounting brackets
• Included Hardware: Mounting brackets, LED lighting, and all necessary hardware included
• Manufacturer Part Number: 29-23835

Fits select 2009-2025 Dodge/Ram 1500, 2500, 3500, and 1500 Classic.

Westin Pro-e Power Running Boards provide a seamless blend of accessibility and vehicle protection. These electric steps automatically deploy when a door is opened and retract flush against the rocker panels when closed, preserving ground clearance and maintaining a clean, streamlined profile. Engineered for long-term reliability in harsh environments, each board is driven by two waterproof IP68-rated motors to ensure consistent operation regardless of weather or road debris.

Constructed from lightweight, corrosion-resistant aluminum with a textured black powder coat finish, these 6-inch wide boards feature integrated LED lights to illuminate the stepping surface for safer entry and exit. The system supports up to 300 lbs per side (600 lbs total capacity) and utilizes vehicle-specific mounting brackets for a direct bolt-on installation with no drilling required.

• Automatic deployment and retraction via door sensors
• Two IP68-rated waterproof motors per side
• 6-inch wide durable aluminum stepping surface
• 600 lbs total weight capacity (300 lbs per side)
• Integrated LED lighting for enhanced entry/exit visibility
• Corrosion-resistant textured black powder coat finish
• Bolt-on installation using vehicle-specific hardware
• Manufacturer Part Number: 29-23565

Fits 2024-2026 Toyota Tacoma Double Cab (SR, SR5, Limited, TRD Sport, TRD Off-Road, TRD Pro, and Trailhunter).

The Westin Pro-E Electric Running Boards provide a premium, automated entry and exit solution for your Toyota Tacoma. These power-actuated steps automatically deploy when a door is opened and retract flush against the rocker panels when closed, preserving ground clearance and maintaining the vehicle's sleek profile. Engineered for long-term durability in harsh environments, each side utilizes two dedicated IP68-rated waterproof motors to ensure reliable operation regardless of weather or terrain.

Built from corrosion-resistant aluminum and finished in a durable textured black powder coat, the 6-inch wide step surface offers a stable and secure platform. Integrated LED lights activate upon deployment to illuminate the stepping area for safer use at night. The system includes vehicle-specific mounting brackets and hardware for a direct, no-drill installation that bolts to factory mounting points.

• Manufacturer Part Number: 29-22785
• Automatic deployment and retraction via door sensors
• Dual IP68-rated waterproof motors per side for maximum reliability
• 6-inch wide durable aluminum boards with textured black finish
• Integrated LED entry lights for enhanced nighttime visibility
• 300 lbs. weight capacity per side (600 lbs. total)
• Includes vehicle-specific mounting brackets and hardware
• No-drill installation for a clean factory-style fit

Fits select 2003-2026 Chevrolet Express 1500/2500/3500, Ford Transit 150/250/350, GMC Savana 1500/2500/3500, Mercedes-Benz Sprinter, and Ram ProMaster.

Westin Grate Steps Running Boards are engineered to provide reliable footing and rocker panel protection in the most demanding commercial and utility environments. These heavy-duty boards feature a generous 6-1/4 inch wide step surface with aggressive 1/4 inch high punched treads. This design ensures maximum traction in rain, snow, and mud, while the unique serrated edges help clear debris from boots before entering the cab.

Built for durability, these boards utilize solid one-piece construction with fully welded ends. To combat corrosion, Westin applies an E-coated base coat that provides superior longevity compared to standard finishes, topped with a rugged textured black powder coat. Each set includes a custom die-cast riveted logo badge for a professional finish.

• Step Surface Width: 6-1/4 inches
• Step Lengths: 46 inch (Driver) and 97 inch (Passenger)
• Traction Surface: 1/4 inch high punched tread with serrated edges
• Finish: Textured black powder coat over E-coat corrosion protection
• Construction: Fully welded 1-piece steel
• Manufacturer Part Number: 27-81005
• Installation Note: Vehicle-specific mount kit required (sold separately)

Fits select 2001-2025 Dodge Dakota, Honda Ridgeline, and Ram 1500, 2500, and 3500 trucks.

Westin Grate Steps Running Boards (MPN 27-74765) are engineered for commercial, utility, and heavy-duty use where traction is a necessity. Featuring an expansive 6 1/4-inch wide step surface, these boards utilize an aggressive 1/4-inch high punched tread pattern to provide secure footing in rain, snow, and mud. The unique serrated edges act as a scraper to clean footwear before entering the cab, while the solid one-piece construction ensures maximum strength and stability under load.

• Solid one-piece construction with stylishly formed and fully welded ends
• Aggressive 1/4-inch high punched tread allows for maximum traction in all weather conditions
• Serrated edges help clear debris from boots to keep the vehicle interior clean
• Dual-stage finish with an E-coated base coat for superior corrosion protection
• 6 1/4-inch wide stepping surface for safe cab entry and exit
• Includes a custom die-cast riveted Westin logo badge
• Textured black powder coat finish for long-lasting durability
• Length: 83 inches
• Manufacturer Part Number: 27-74765

Note: These running boards require a vehicle-specific mounting kit for installation, which is sold separately.

Fits select 1992-2026 Chevrolet Silverado/Suburban, GMC Sierra/Yukon, Ford F-150/Expedition/Excursion, and Toyota Tundra.

Westin Grate Steps Running Boards are engineered for high-demand commercial, utility, and off-road applications where traction is critical. The 6-1/4" wide step surface features an aggressive 1/4" high punched tread that provides secure footing in any weather condition. Unique serrated edges act as a boot scraper to remove snow, mud, and debris before you enter the cab, while the 1-piece construction provides additional protection for your vehicle's rocker panels.

Built to withstand the elements, these boards feature a solid steel design with stylishly formed, fully welded ends. The E-coated base layer provides superior corrosion resistance beneath a durable textured black finish. Each board is finished with a custom die-cast riveted logo badge for a professional appearance.

• Step Surface Width: 6-1/4"
• Tread Height: 1/4" punched steel
• Overall Length: 90"
• Construction: Solid 1-piece design with fully welded ends
• Finish: Textured Black over E-coated base
• Included: Die-cast riveted logo badge
• Manufacturer Part Number: 27-74745

Note: A vehicle-specific mounting kit is required for installation and is sold separately.