Fits select 1999-2026 Chevrolet Colorado, Silverado 1500/2500/3500; GMC Canyon, Sierra 1500/2500/3500; Ford F-150, Super Duty, Ranger; Dodge/Ram 1500/2500/3500; Jeep Wrangler; and Toyota Tacoma equipped with Go Rhino RB-series running boards.

Enhance the accessibility of your truck or SUV with the Go Rhino RB Series Drop Steps. These steps are designed to bolt directly to existing RB10, RB20, and RB30 running boards, providing a dedicated stepping surface that sits 4 inches below the main board. This additional drop is ideal for lifted vehicles or passengers who need a lower step-in height. Built from fabricated steel and finished in an OE-approved bedliner coating, these steps offer a rugged, slip-resistant surface that protects against corrosion and trail debris.

• Specifically designed to fit Go Rhino RB10, RB20, and RB30 running boards (excludes Slim Line versions)
• Will NOT fit factory-installed running boards
• 4-inch drop from the main board for easier entry and exit
• Durable fabricated steel construction for long-lasting performance
• Textured bedliner coating finish for superior grip and weather resistance
• Complete kit includes all necessary hardware for a simple, no-drill installation
• Longer boards can accommodate up to 2 pairs of drop steps
• Manufacturer Part Number: 69420000T
• Limited Lifetime warranty on construction; 5-year warranty on finish

Fits select 1999-2026 Chevrolet, Dodge, Ford, GMC, Jeep, Ram, and Toyota trucks and SUVs equipped with Go Rhino RB10, RB20, or RB30 running boards.

Enhance vehicle accessibility with Go Rhino RB Series Drop Steps. These fabricated steel steps provide a 4-inch drop below the main running board, creating a lower stepping surface for easier entry and exit. Designed specifically for the RB series, these steps bolt directly to the boards using included hardware for a straightforward, no-drill installation. The textured black powder-coat finish provides superior corrosion resistance and matches the rugged aesthetic of the RB10, RB20, and RB30 product lines.

• Specifically fits Go Rhino RB10, RB20, and RB30 running boards (excludes Slim Line series)
• 4-inch drop surface area for improved cabin access
• Heavy-duty fabricated steel construction for long-term durability
• Textured black finish resists corrosion, salt, and debris
• Simple no-drill installation with all mounting hardware included
• Longer board applications can accommodate up to two pairs of steps
• Manufacturer Part Number: 69420000PC
• Warranty: Limited Lifetime on materials/construction; 5-Year on finish

Note: These steps are designed exclusively for Go Rhino RB Series boards and will not fit factory-installed running boards.

Fits select 2015-2026 Ford F-150, F-250 Super Duty, and F-350 Super Duty trucks across various trim levels including Raptor, Tremor, and King Ranch.

The Go Rhino RB20 Slim Running Boards deliver the same heavy-duty, Raptor-inspired styling and protection as the original RB Series but with a narrower profile. Measuring 5.5 inches at the widest point and tapering toward the rear, these boards sit tighter to the cab to provide increased ground clearance for off-road use without sacrificing a solid step platform.

Built for durability in harsh environments, these boards are constructed from 16-gauge zinc-coated galvanized steel. This provides superior resistance to corrosion, impact, and abrasion. The textured black finish and modern bullet-stamped design offer a slip-resistant surface while protecting your lower body panels from road debris. This complete kit includes all necessary mounting brackets for an easy, no-drill installation on factory mounting points.

• Manufacturer Part Number: 69417780SPC
• Construction: 16-gauge zinc-coated galvanized steel
• Finish: Textured Black
• Step Width: 5.5 inches at widest point
• Design: Slim, low-profile, cab-length boards with tapered rear
• Installation: No-drill, complete kit with brackets included
• Warranty: Limited Lifetime on materials/construction; 5-year on finish

Fits select 2015-2026 Ford F-150, F-250 Super Duty, and F-350 Super Duty models (including Raptor and Tremor).

The Go Rhino RB20 Slim Line Running Boards provide heavy-duty rocker panel protection with a low-profile design. Engineered for off-roaders who require maximum ground clearance, these Raptor-inspired boards sit tighter to the cab than the original RB series. Each board is constructed from 16-gauge zinc-coated galvanized steel and finished with a durable bedliner coating to resist impact, abrasion, and corrosion.

The modern bullet-stamped platform measures 5.5 inches at its widest point, tapering toward the rear for a streamlined look that doesn't compromise on step area. This complete kit includes all necessary vehicle-specific mounting brackets and hardware for a straightforward, no-drill installation.

• Heavy-duty 16-gauge zinc-coated galvanized steel construction
• Slim, low-profile design for increased ground clearance
• 5.5-inch wide bullet-stamped step surface for secure footing
• Protective bedliner coating for superior durability
• Complete kit includes boards and mounting brackets
• Easy, no-drill installation on factory mounting points
• Manufacturer Part Number: 69415587ST

Warranty: Includes a limited lifetime warranty on materials and construction with a 5-year warranty on the textured black finish.

Fits 2015-2025 Ford F-150 and 2017-2026 Ford F-250/F-350 Super Duty models.

The Go Rhino RB20 Slim Running Boards provide the heavy-duty protection and Raptor-inspired styling of the original RB Series in a streamlined, low-profile package. At 5.5 inches wide at the widest point, the Slim design sits closer to the cab than the standard RB20, significantly increasing ground clearance for off-road maneuvers. Constructed from 16-gauge zinc-coated galvanized steel, these boards are engineered to shield your rocker panels from flying debris while offering a stable, bullet-stamped step platform.

This comprehensive kit includes both driver and passenger side boards and all necessary mounting brackets for a simplified, no-drill installation. The textured black powder coat finish provides superior resistance against corrosion, impact, and abrasion, ensuring long-term durability in harsh environments.

• 16-gauge zinc-coated galvanized steel construction for maximum durability
• Slim 5.5-inch wide board tapers toward the rear for a modern, flush look
• Bullet-stamped surface provides reliable traction and drainage
• Easy no-drill installation utilizing factory mounting points
• Complete kit includes side boards and vehicle-specific mounting hardware
• Limited Lifetime warranty on materials; 5-year warranty on finish
• Manufacturer Part Number: 69415587SPC

Fits 2004-2014 Ford F-150 SuperCrew models (including FX2, FX4, King Ranch, Lariat, Platinum, SVT Raptor, XL, and XLT).

Go Rhino RB20 Slim Line Running Boards provide the heavy-duty protection of the original RB Series in a streamlined, low-profile design. Specifically engineered to sit tighter against the cab, these boards maximize ground clearance for off-road environments while offering a stable, full-length step for cab entry. Constructed from 16-gauge zinc-coated galvanized steel, the boards are finished with a durable, impact-resistant bedliner coating to defend against corrosion, abrasion, and trail debris.

This complete kit includes both driver and passenger side boards along with all necessary mounting brackets for a straightforward, no-drill installation using factory mounting points. The modern bullet-stamped design measures 5.5 inches at its widest point and tapers toward the rear for a clean, integrated look.

• Material: 16-gauge zinc-coated galvanized steel
• Finish: Textured Black Bedliner Coating
• Step Width: 5.5 inches at widest point
• Installation: Bolt-on, no-drill
• Manufacturer Part Number: 69415087ST
• Includes: Left and right boards, mounting brackets, and hardware
• Warranty: Limited Lifetime on materials/construction; 5-year on finish

Fits 2004-2014 Ford F-150 SuperCrew models across FX2, FX4, King Ranch, Lariat, Platinum, SVT Raptor, XL, and XLT trims.

The Go Rhino RB20 Slim Running Boards deliver the same heavy-duty, Raptor-inspired toughness as the original RB series but in a lower-profile design. Specifically engineered to sit tighter against the cab, these boards provide increased ground clearance for off-road environments while protecting your rocker panels from debris. Each board is constructed from corrosion-resistant 16-gauge zinc-coated galvanized steel and finished in a durable textured black powder coat to resist impact and abrasion.

Featuring a modern bullet-stamped design, these boards measure 5.5 inches at their widest point and taper toward the rear for a sleek, integrated look. The complete kit includes all necessary mounting brackets and hardware for a straightforward, no-drill installation using factory mounting points.

• Constructed from heavy-duty 16-gauge zinc-coated galvanized steel
• Raptor-inspired bullet-stamped platform for secure footing
• 5.5-inch wide step surface tapered for a slim, low-profile fit
• Protects vehicle panels from flying stones and debris
• No-drill installation using included vehicle-specific brackets
• Finish: Textured Black
• Manufacturer Part Number: 69415087SPC
• Warranty: Limited lifetime on materials; 5-year on finish

Fits 2004-2014 Ford F-150 Super Cab models including FX2, FX4, Lariat, STX, SVT Raptor, XL, and XLT.

Go Rhino RB20 Slim Running Boards deliver the aggressive, Raptor-inspired aesthetic of the original RB series in a lower-profile design. Measuring 5.5 inches at the widest point, the RB20 Slim sits closer to the cab than the standard model to maximize ground clearance for off-road use without sacrificing a secure stepping surface. These boards are engineered from 16-gauge zinc-coated galvanized steel to provide high-strength protection for your rocker panels against trail debris and road spray.

The kit features a corrosion-resistant textured black finish and includes vehicle-specific mounting brackets for a precise, no-drill installation using existing factory mounting points.

• Manufacturer Part Number: 69412680SPC
• Material: 16-gauge zinc-coated galvanized steel
• Finish: Textured Black
• Board Width: 5.5 inches (tapered design)
• Design: Slim-line, bullet-stamped platform
• Installation: Easy, no-drill application
• Included: Pair of running boards and mounting brackets
• Warranty: Limited Lifetime on materials/construction; 5-year on finish

Fits select 2019-2026 Chevrolet Silverado and GMC Sierra 1500, 1500 LTD/Limited, 2500 HD, and 3500 HD models across all trims including AT4, Denali, ZR2, and High Country.

The Go Rhino RB20 Slim Running Boards deliver the same aggressive styling and heavy-duty protection as the standard RB Series but with a narrower profile designed for off-road clearance. Tucking closer to the vehicle cab, these cab-length boards provide a 5.5-inch wide stepping surface to protect your rocker panels from debris while maximizing breakover angles. Constructed from 16-gauge zinc-coated galvanized steel and finished with a rugged bedliner coating, these boards are built to resist corrosion, impact, and abrasion in the toughest environments.

• Raptor-inspired bullet-stamped design provides superior traction and water drainage
• Constructed from heavy-duty 16-gauge zinc-coated galvanized steel
• Protective bedliner coating for maximum resistance to corrosion and impact
• Slim 5.5-inch width offers increased ground clearance compared to original 7.5-inch boards
• Includes vehicle-specific mounting brackets for a straightforward, no-drill installation
• Manufacturer Part Number: 69404887ST
• Warranty: Limited Lifetime on materials and construction; 5-year on finish

Fits 2019-2026 Chevrolet Silverado and GMC Sierra 1500, 2500 HD, and 3500 HD models (including LTD and Limited editions).

Go Rhino RB20 Slim Running Boards offer the heavy-duty protection and aggressive styling of the original RB Series in a lower-profile design. These Raptor-inspired boards are 5.5 inches at their widest point, tapering toward the rear to provide a tighter fit against the cab. This slimmer profile significantly improves ground clearance for off-road maneuvers while still providing a stable, full-length step for cab access.

Constructed from 16-gauge zinc-coated galvanized steel, these boards are engineered for impact and corrosion resistance. The modern bullet-stamped surface provides reliable traction and helps shield your vehicle's rocker panels from road debris and trail obstacles. The textured black powder coat finish adds an extra layer of abrasion resistance, ensuring long-lasting durability in harsh environments.

• Heavy-duty 16-gauge zinc-coated galvanized steel construction
• Slim 5.5-inch wide tapered design for increased ground clearance
• Textured black powder coat finish for maximum corrosion and impact resistance
• No-drill installation using factory mounting points
• Complete kit includes both driver and passenger side boards plus mounting brackets
• Manufacturer Part Number: 69404887SPC
• Limited Lifetime warranty on materials; 5-year warranty on finish

Fits select 1999-2026 Chevrolet Silverado, Dodge/Ram 1500/2500/3500, Ford F-150/F-250/F-350, GMC Sierra, and Toyota Tacoma/Tundra (Full fitment list below).

The Go Rhino RB20 Series provides a heavy-duty, Raptor-inspired side step solution for truck owners who prioritize both ground clearance and a massive stepping surface. Constructed from 16-gauge zinc-coated galvanized steel, these 87-inch boards are built to withstand heavy impacts and resist corrosion in harsh environments. The modern bullet-stamped louver design offers a 7.5-inch wide step at its widest point, tapering toward the rear for a sleek, aggressive profile that tucks high and tight against the rocker panels.

Finished in a rugged, impact-resistant bedliner coating, the RB20 protects your vehicle's body from road debris and provides maximum traction in wet or muddy conditions. These boards feature a welded, boxed-end design for added durability. Please note: this part number includes the running boards only; vehicle-specific mounting brackets are sold separately.

• Length: 87 inches
• Stepping Surface: 7.5 inches wide (tapered)
• Material: 16-gauge zinc-coated galvanized steel
• Finish: Rugged protective bedliner coating
• Design: Raptor-inspired louvered step with boxed ends
• Resistance: Impact, abrasion, and corrosion resistant
• Manufacturer Part Number: 69400087T

Fits select 1999-2026 Chevrolet, Ford, GMC, Ram, Dodge, and Toyota trucks. Provide your vehicle with heavy-duty protection and a secure step with the Go Rhino RB20 Slim Running Boards. These Raptor-inspired boards feature 16-gauge zinc-coated galvanized steel construction designed to withstand impact and corrosion in harsh off-road environments.

The RB20 Slim series offers a low-profile design that sits tighter to the cab than the original RB20, providing increased ground clearance for trail navigation. Each board features a modern bullet-stamped platform measuring 5.5 inches at its widest point, tapering toward the rear for a sleek, aggressive aesthetic. Finished in a rugged, protective bedliner coating, these 87-inch boards are engineered to resist abrasion and flying debris.

• 87-inch board length for cab-length coverage
• Slim 5.5-inch wide step surface for high-clearance applications
• Constructed from 16-gauge zinc-coated galvanized steel for maximum durability
• Textured bedliner coating for superior corrosion and impact resistance
• Includes bars only; vehicle-specific mounting brackets are sold separately
• Manufacturer Part Number: 69400087ST
• Warranty: Limited Lifetime on materials and construction; 5-year finish warranty

Fits select 1999-2026 Ford F-Series, Ram 1500/2500/3500, Chevrolet Silverado, GMC Sierra, and Toyota Tundra/Tacoma trucks. These RB20 Slim Series running boards offer the same heavy-duty cab protection as the original RB series but with a lower-profile design that sits tighter to the body for improved ground clearance during off-road use.

Constructed from 16-gauge zinc-coated galvanized steel, these Raptor-inspired side steps are built to resist corrosion, impact, and abrasion. The modern bullet-stamped platform provides a secure 5.5-inch wide stepping surface that tapers toward the rear of the cab. This specific part includes the bars only; mounting brackets are sold separately to ensure a custom fit for your specific vehicle application.

• Manufacturer Part Number: 69400087SPC
• Material: 16-gauge zinc-coated galvanized steel
• Finish: Textured Black powder coat
• Width: 5.5 inches at widest point (tapered design)
• Length: 87 inches
• Includes: Pair of running boards (bars only, brackets NOT included)
• Warranty: Limited Lifetime on construction; 5-year on finish