Fits 1997-2002 Jeep Wrangler TJ (Sahara, SE, Sport, and X).

The PRP Daily Driver High Back Suspension Seat is engineered to provide a balance between off-road containment and daily-driven accessibility. Featuring 5-inch side bolsters, these seats offer the lateral support needed for technical trails while maintaining low enough sides for easy entry and exit during everyday use. The interior construction utilizes a vinyl-coated nylon suspension liner and dual-density foam to absorb impacts and vibrations, significantly reducing occupant fatigue during long days of rock crawling or desert transit.

This complete kit includes two seats and the necessary adapter mounts to bolt directly to your 1997-2002 Jeep Wrangler TJ factory sliders. This configuration ensures you retain the OEM sliding functionality for adjustable legroom. The seats are finished with a durable tweed center for breathability, paired with vinyl backing and piping for easy cleaning and long-term wear resistance.

• Containment: 5-inch side bolsters for balanced support and entry
• Construction: Vinyl-coated nylon suspension liner with dual-density foam
• Materials: Tweed center, vinyl back, and vinyl piping
• Seat Dimensions: 31" Tall x 21" Wide x 26" Deep
• Seat Height: Approximately 2" higher than factory OE seats
• Safety: Designed for off-road use with 4-point or 5-point harnesses
• Mounting: Includes adapter mounts for factory sliders; retains slide function

Note: Passenger seats may not retain the factory tumble feature after installation. Use with 3-point factory seat belts requires a seat belt extension or angle bracket. Designed for off-road use only.

Fits 2007-2018 Jeep Wrangler JK and JKU (Rubicon, Sahara, Sport, X, and Unlimited models).

The PRP Premier is a versatile, all-around off-road suspension seat designed to provide 7 inches of containment while maintaining easy entry and exit from the vehicle. Built for trail rigs and prerunners, these seats utilize a vinyl-coated nylon suspension liner and dual-density foam to absorb high-impact forces and reduce body fatigue during long days in the dirt or dunes. This complete kit includes a pair of seats and the necessary adapter mounts to bolt directly to your factory sliders, preserving fore-and-aft adjustability.

• Kit includes: (2) Premier High Back Seats and (2) adapter mounts
• Materials: Gray Tweed center, vinyl back, and vinyl piping
• Construction: Vinyl-coated nylon suspension liner with dual-density foam
• Dimensions: 31" H x 21" W x 26" D
• Installation: Bolts to OEM sliders; maintains sliding functionality
• Safety: Designed for 4-point or 5-point off-road harnesses

Note: Installed seat height is typically 2 inches higher than factory seats. Use with 3-point seat belts requires a seat belt extension or angle bracket. For some 2-door JK models, a 1/2-inch metal bar on the passenger seat slider must be removed for compatibility with these adapter mounts.

Fits all 2007-2018 Jeep Wrangler JK and JKU models, including Rubicon, Sahara, Sport, and Unlimited trims.

PRP Premier High Back Suspension Seats provide a balance of containment and accessibility for your trail rig or daily-driven Jeep. With 7 inches of medium-level side containment, these seats keep you securely positioned during technical maneuvers without the entry and exit difficulties associated with deep-bucket race seats. The vinyl-coated nylon suspension liner and dual-density foam core are engineered to absorb vibration and harsh impacts, significantly reducing driver fatigue during long days in the dunes or on the rocks.

This complete kit includes two black Premier seats featuring breathable tweed centers with durable vinyl backs and piping. The package comes with vehicle-specific adapter mounts designed to bolt directly to your factory sliders, allowing you to maintain fore and aft adjustability while upgrading your interior.

• Seat Dimensions: 31" H x 21" W x 26" D
• Dual-density foam for long-distance comfort and impact absorption
• Durable vinyl-coated nylon suspension liner
• Mounts to factory sliders via included adapter brackets
• Designed for use with 4-point or 5-point off-road harnesses
• Includes 2x Premier High Back seats and mounting hardware

Note: Installed seat height is typically 2 inches higher than factory seating. For 2-door JK models, a 1/2-inch metal bar on the passenger seat slider must be removed for mount compatibility. These seats are intended for off-road use only.

Fits 1995-2001 Jeep Cherokee XJ (Classic, Country, Limited, SE, Sport).

PRP Premier High Back suspension seats provide the ideal balance of containment and accessibility for your Cherokee XJ. Featuring 7 inches of side containment, these seats keep you securely planted during technical off-road maneuvers while maintaining a bolster height that allows for easy entry and exit from the cabin. The internal construction utilizes a vinyl-coated nylon suspension liner and dual-density foam specifically engineered to absorb high-frequency vibrations and heavy impacts, significantly reducing body fatigue during long days in the dirt or dunes.

This complete kit includes two seats and the application-specific adapter mounts required for the XJ chassis. These brackets are designed to bolt directly to your factory seat sliders, allowing you to maintain fore-and-aft adjustability. Finished in a gray tweed center with vinyl backing and piping, these seats offer a classic aesthetic with modern off-road performance.

• Seat Type: High-back suspension seat with 7-inch side containment
• Construction: Vinyl-coated nylon liner and dual-density impact foam
• Dimensions: 31" Tall x 21" Wide x 26" Deep
• Material: Gray tweed center with vinyl back and piping
• Installation: Includes adapter mounts to retain OEM sliding function
• Harness Compatibility: Designed for 4-point or 5-point off-road harnesses
• Important Note: Seat height is typically 2 inches higher than factory units; 3-point belts require extensions

Fits 1995-2001 Jeep Cherokee XJ models including Classic, Country, Limited, SE, and Sport.

The PRP Premier High Back is a versatile suspension seat designed to provide 7 inches of medium-level side containment, keeping you secure during technical off-roading while allowing for easy entry and exit. Built for comfort and durability, these seats utilize a vinyl-coated nylon suspension liner and dual-density foam to significantly reduce impact on the body and minimize fatigue during extended use in the dirt or dunes.

This comprehensive kit includes two Premier seats and the necessary adapter mounts to bolt directly to your Cherokee's factory sliders, allowing you to maintain fore and aft adjustability. The seats are finished with a classic black tweed center, vinyl backing, and vinyl piping for long-lasting wear resistance.

• 7-inch medium containment sides for stability and accessibility
• High-density dual-density foam for superior impact absorption
• Vinyl-coated nylon suspension liner to reduce vibration
• Includes 2x Premier High Back seats and XJ-specific adapter mounts
• Retains factory seat slider functionality
• Dimensions: 31" Tall x 21" Wide x 26" Deep

Note: These seats typically sit 2" higher than stock XJ seats. Designed for off-road use only with 4-point or 5-point harnesses. Passenger-side tumble functionality may be lost. Factory 3-point seat belts require an extension or angle bracket.

Fits 1976-1995 Jeep CJ7 and Wrangler YJ.

The PRP Premier High Back Suspension Seat is a versatile, all-around seating solution designed to increase comfort and containment for off-road applications. Featuring 7 inches of side containment, these seats provide enough lateral support to keep you secure in rough terrain while remaining low enough for easy entry and exit from the vehicle. The internal vinyl-coated nylon suspension liner and dual-density foam work together to absorb high-impact landings and vibrations, significantly reducing body fatigue during long days on the trail or in the dunes.

This complete kit includes a pair of Premier seats finished with gray tweed centers, vinyl backs, and vinyl piping for a classic look and durable performance. The included adapter mounts are engineered to bolt directly to your factory OEM sliders, allowing you to install the seats while maintaining the ability to slide forward and backward for optimal ergonomics.

• Seat Dimensions: 31" Tall x 21" Wide x 26" Deep
• Containment: 7-inch medium-level side containment
• Materials: Gray Tweed center, Vinyl back, and Vinyl piping
• Construction: Dual-density foam with a vinyl-coated nylon suspension liner
• Installation: Reuses factory sliders via included adapter mounts
• Harness Compatibility: Designed for 4-point or 5-point off-road harnesses
• Seat height sits approximately 2" higher than factory OE seats

Note: Intended for off-road use only. Factory 3-point seat belts require a seat belt extension or angle bracket for proper fitment. Passenger seat tumbling functionality may not be retained after installation.

Fits all 2003-2006 Jeep Wrangler TJ models, including Rubicon, Sahara, SE, Sport, Unlimited, and X.

The PRP Premier High Back is a versatile, all-around suspension seat designed specifically to improve comfort and driver containment in Jeep Wrangler TJ models. Featuring 7 inches of side containment, these seats provide security in rough terrain while allowing for easy entry and exit. The internal construction uses a vinyl-coated nylon suspension liner and dual-density foam to absorb high-impact forces, significantly reducing the physical fatigue often felt after long days on the trail or in the dunes.

This kit includes two Premier seats finished with durable gray tweed centers, vinyl backs, and vinyl piping. To simplify installation, the package includes vehicle-specific adapter mounts that bolt directly to your factory seat sliders, allowing you to retain full sliding functionality.

• Seat Dimensions: 31" Tall x 21" Wide x 26" Deep
• Materials: Gray tweed center, vinyl back, and vinyl piping
• Mounting: Includes adapter mounts for 2003-2006 Jeep Wrangler TJ factory sliders
• Containment: 7 inches of medium-level side containment
• Suspension: Vinyl-coated nylon liner with dual-density foam for impact reduction

Note: These seats typically sit 2 inches higher than the factory units. Designed for off-road use only with 4-point or 5-point harnesses. Passenger seats may lose the factory tumble functionality. Use with OE 3-point seat belts requires a seat belt extension or angle bracket.

Fits 2003-2006 Jeep Wrangler TJ models including Rubicon, Sahara, SE, Sport, Unlimited, and X.

PRP Premier High Back suspension seats are engineered to provide the ideal balance between high-performance containment and everyday accessibility. These seats feature 7 inches of side containment to keep you securely positioned during aggressive trail runs or high-speed desert sections, while the medium-height bolsters ensure entry and exit remain manageable for a daily-driven or weekend rig. The internal vinyl-coated nylon suspension liner and dual-density foam work in tandem to absorb harsh vertical impacts, significantly reducing rider fatigue during long days off-road.

This comprehensive kit includes two Premier seats and the necessary adapter mounts to bolt directly to your factory 2003-2006 TJ seat sliders. This configuration preserves your ability to slide the seats forward and backward for proper legroom. The seats are finished with a durable tweed center for breathability, supported by a heavy-duty vinyl back and vinyl piping for long-lasting wear resistance.

• Seat Dimensions: 31 in. Tall x 21 in. Wide x 26 in. Deep
• Containment: 7-inch side containment for off-road security
• Materials: Breathable Tweed centers with Vinyl back and piping
• Mounting: Includes adapter mounts for 2003-2006 Jeep TJ factory sliders
• Safety: Designed for use with 4-point or 5-point off-road harnesses
• Installation Note: Seat height is approximately 2 inches higher than factory units
• Part Number: PRP-PREMIER-TJ-KIT

The OMP WRC Series Art racing seat combines professional-grade competition ergonomics with the iconic BMW M-Rain aesthetic. Designed to provide superior lateral support during high-G cornering, this seat is an ideal choice for drivers looking to bridge the gap between vintage BMW motorsport heritage and modern performance equipment.

Built as part of the OMP WRC Series, this seat features deep side bolsters and a contoured backrest to keep the driver securely positioned behind the wheel. The "Art" designation highlights the specialized upholstery, which utilizes the classic "M-Rain" pattern known from legendary BMW M-series interiors.

• Manufacturer: OMP
• Series: WRC Series Art
• Upholstery: BMW M-Rain pattern fabric
• Function: High-performance lateral support and driver positioning

The OMP HTE-R is a professional-grade racing seat designed for maximum driver security and lateral support. Built with a high-strength fiberglass shell and finished in a sleek black gel coat, this seat features an integrated head restraint (halo) system designed to limit lateral head movement and enhance safety during side impacts. This specific edition is upholstered in the iconic M Rain fabric, offering a classic motorsport aesthetic without compromising on technical performance.

The HTE-R is engineered for ergonomics and compatibility, featuring large shoulder harness slots to accommodate various driver heights and Hans devices. The seat includes removable back, base, and leg cushions, allowing drivers to customize their seating position for optimal control and comfort during long stints.

• High-strength fiberglass shell with black gel-coat finish
• Integrated head restraint system for enhanced lateral protection
• Upholstered in distinctive M Rain pattern fabric
• Large harness slots compatible with 4, 5, or 6-point belts
• Hans device compatible shoulder design
• Removable cushions for tailored support and easy maintenance
• FIA 8855-1999 Homologated
• Designed for side-mount installation

NRG Innovations Universal Low Floor Mount Seat Brackets provide a solid foundation for aftermarket seat installations while significantly reducing seating height. By positioning the seat as close to the vehicle floor as possible, these brackets increase headroom for taller drivers and those wearing helmets, while simultaneously lowering the vehicle's center of gravity.

Engineered from high-strength steel for maximum rigidity, these brackets are designed to withstand the stresses of performance driving. As a universal component, this bracket offers a versatile mounting base suitable for custom builds where vehicle-specific brackets are unavailable. Note that because this is a universal part, drilling or minor fabrication is typically required to align with your specific vehicle floor pan or seat sliders.

• Brand: NRG Innovations
• Part Type: Seat Bracket
• Configuration: Single (One side)
• Mount Style: Low Floor Mount
• Material: Heavy-duty steel construction
• Finish: Durable black coating

Improve driver and passenger comfort during long hauls or daily commutes with the NRG Prisma Sakura Memory Foam Neck Pillow. Designed to reduce neck strain and fatigue, this pillow provides critical support by filling the gap between the seat headrest and your shoulders, promoting better posture and ergonomics behind the wheel.

The core features high-density memory foam that contours to your specific anatomy, offering a custom fit every time you sit down. Wrapped in the signature NRG Prisma Sakura print fabric, this pillow adds a distinct aesthetic touch to your vehicle's interior while providing a soft, breathable surface for the driver.

• High-density memory foam core for resilient, contoured support
• Signature Prisma Sakura floral print design for a custom interior look
• Universal fitment compatible with most factory and aftermarket bucket seats
• Integrated heavy-duty elastic strap for secure mounting and quick height adjustment
• Effective solution for reducing neck fatigue during extended driving sessions

The NRG Innovations Memory Foam Neck Pillow provides essential cervical support during long commutes, road trips, and spirited driving. Designed to fill the gap between your neck and the seat, this pillow uses high-density memory foam to contour to your body, reducing muscle tension and driver fatigue.

• High-density memory foam core for consistent support and pressure relief
• Soft, breathable outer fabric for all-season comfort
• Universal elastic mounting strap designed to fit most factory and aftermarket bucket seats
• Vibrant red finish with embroidered NRG logo
• Sold individually

Improve your driving ergonomics and reduce neck fatigue with the NRG Innovations Memory Foam Neck Pillow. Specifically designed to fill the gap between your headrest and seat back, this pillow provides critical cervical spine support during long-distance commutes or spirited driving. The high-density memory foam core conforms to your neck's unique shape to alleviate pressure points and minimize muscle strain.

• High-density memory foam provides consistent support and pressure relief
• Durable fabric cover finished in vibrant purple for interior customization
• Universal elastic mounting strap ensures a secure fit on nearly any factory or aftermarket seat headrest
• Reduces driver fatigue by maintaining proper posture
• Compact design fits seamlessly into automotive cabin environments

Enhance driver comfort and reduce neck fatigue during long commutes or track days with the NRG Innovations Memory Foam Neck Pillow. This ergonomic support cushion is engineered to bridge the gap between your neck and the seat headrest, providing consistent, resilient support that conforms to your anatomy.

• High-density memory foam construction for long-lasting shape retention and comfort
• Universal fitment designed for use with most factory and aftermarket performance bucket seats
• Sleek black finish integrates seamlessly with leather or cloth interiors
• Integrated elastic strap ensures secure placement and easy installation
• Reduces spinal strain and promotes better posture during extended driving periods

Whether you are daily driving or prepping for a road trip, this NRG Innovations neck pillow provides a simple, effective upgrade to your vehicle's interior ergonomics. The low-profile design and premium materials make it a functional addition to any cabin without sacrificing aesthetic appeal.

The MOMO Supercup fiberglass composite race seat is engineered for competitive track use, providing a rigid and lightweight seating solution. This XL-sized seat features a high-strength composite shell finished in black flame-retardant fabric, offering a secure fit for larger drivers during high-performance driving conditions.

• Constructed from a lightweight fiberglass composite shell for maximum rigidity
• Finished in durable black flame-retardant upholstery
• Ergonomic shape designed for lateral support and driver stability during high-G cornering
• Integrated harness slots to accommodate multi-point racing harnesses
• Size: Extra Large (XL)
• Designed for side-mount installation to ensure a low center of gravity

The Momo Daytona Eco XL delivers professional-grade safety and ergonomic support for drivers requiring a wider seating profile. Designed for competitive use, this black hardshell racing seat features high-side bolsters to maintain driver position during high-lateral-G maneuvers while providing the necessary clearance for multi-point harnesses. The XL sizing offers increased width compared to standard racing shells, ensuring a more comfortable and secure fit for larger frames without sacrificing structural integrity.

• FIA 8855-1999 certified for sanctioned motorsport competition
• XL sizing provides increased width for improved driver ergonomics
• Rigid hardshell construction for maximum impact protection and weight savings
• Five harness slots accommodate 4, 5, or 6-point safety belts
• Compatible with standard side-mount seat brackets

The Momo Start racing seat provides a reliable entry point into FIA-certified safety for club racers and track enthusiasts. Engineered with a rigid fiberglass hardshell, this seat delivers the essential lateral support required for high-G cornering while maintaining a slim profile suitable for tighter vehicle cockpits.

Upholstered in durable, fire-retardant black fabric, the Start seat is designed for side-mount installation, ensuring a low seating position and a direct connection to the chassis for improved driver feedback during performance driving.

• Brand: Momo
• Series: Start
• Certification: FIA 8855-1999 approved
• Expiration Year: 2030
• Color/Finish: Black
• Shell Material: Fiberglass hardshell
• Mounting Style: Side mount (hardware sold separately)

Keep your intake system performing at its peak with the HKS Super Power Flow (SPF) Cushion replacement filter element. This purple foam media is designed specifically for HKS "mushroom" style filter housings, providing the high-volume airflow HKS is known for while maintaining essential engine-protecting filtration.

Over time, filter elements can become clogged with debris or degraded by environmental factors. Replacing the foam cushion ensures your engine continues to breathe efficiently without the restriction of a dirty filter. This genuine HKS component is a direct-fit replacement for the SPF series, allowing for a quick and tool-free service interval.

• Genuine HKS replacement filter element
• Compatible with HKS Super Power Flow (SPF) filter housings
• High-flow multi-layer foam construction
• Distinctive purple finish
• Restores filtration efficiency and airflow capacity

Enhance driver ergonomics and seat support with the OMP Racing Seat Cushion. This black foam pad is designed to provide supplemental support or serve as a replacement for worn internal cushioning, ensuring the driver maintains an optimal seating position during high-G maneuvers and endurance stints.

• Manufacturer Part Number: HB0-0695-071
• Color: Black
• Provides additional lumbar, thigh, or base support depending on placement
• High-density foam construction for long-lasting resilience and comfort
• Compatible with most OMP competition seats and other bucket seat applications

Experience superior driver containment and endurance comfort with the PRP Kilo Composite Race Seat. Engineered for high-G environments, this seat features a high-strength Fiberglass Reinforced Polymer (FRP) composite shell that balances lightweight performance with exceptional rigidity. The high-containment design utilizes deep thigh bolsters, extended hip support, and a wide shoulder area to minimize lateral movement and driver fatigue during long stints.

• Advanced Ergonomics: Features a recessed shoulder area specifically designed for HANS and other head/neck restraint systems, ensuring an upright seating position without forward shoulder pressure.
• Impact Absorption: Includes a thick, injection-molded bottom cushion designed to absorb energy from harsh impacts, paired with high-density foam padding along the back and sides.
• Race-Ready Integration: Large harness slots accommodate multi-point harnesses, communication lines, and pumper hoses.
• Durable Construction: Upholstered in breathable Black Xcel Cloth for long-lasting wear and heat management.
• Fitment: Accommodates riders with up to approximately a 42-inch waist size.
• MPN: AC4601-260

The PRP Kilo Composite Race Seat is engineered for high-performance driving where containment and weight reduction are critical. Built with a high-strength fiber-reinforced plastic (FRP) composite shell, this seat provides a rigid platform that reduces lateral movement during high-G turns and technical maneuvers. The ergonomic design features deep thigh bolsters and extended hip support to lock the driver firmly in place, reducing fatigue during long racing stints.

Comfort is addressed through a specialized injection-molded bottom cushion designed to absorb energy from impacts, paired with high-density foam padding along the back and sides. The seat is upholstered in durable, water-resistant vinyl with a breathable sports mesh center to manage heat. For safety and communication integration, the Kilo includes oversized harness slots to accommodate multi-point harnesses, pumper hoses, and communication lines, while the recessed shoulder area ensures full compatibility with HANS and other neck restraint systems.

• High-strength FRP composite shell for lightweight durability
• High-containment bolsters for hip, thigh, and shoulder stability
• Large harness slots for comms, pumper hoses, and 5-point harnesses
• Recessed shoulder area compatible with HANS/neck restraints
• Injection-molded energy-absorbing bottom cushion
• Fits riders comfortably up to approximately a 42-inch waist
• Manufacturer Part Number: AC4601-206

The PRP Kilo Composite Race Seat (AC4601-204) is engineered for high-containment, providing the lateral support and stability required for high-G maneuvers and rough terrain. Constructed with a lightweight Fiber Reinforced Plastic (FRP) shell, this seat balances structural rigidity with weight savings to improve overall vehicle handling. The interior is upholstered with water-resistant vinyl on the high-wear arm areas and a breathable sports mesh center to manage heat during long-distance stints.

• High-containment design with deep thigh bolsters and extended hip support to reduce lateral movement.
• Lightweight FRP composite shell provides exceptional strength and durability.
• Fits riders comfortably up to approximately a 42-inch waist.
• Thick, injection-molded bottom cushion specifically designed to absorb energy from repeated impacts.
• Recessed shoulder area for full compatibility with HANS and other neck restraint systems, ensuring an upright seating position.
• Large harness slots easily accommodate racing harnesses, communication lines, and pumper hoses.
• Materials: Durable water-resistant vinyl, high-density foam padding, and breathable mesh.
• Manufacturer Part Number: AC4601-204

The PRP Kilo Composite Race Seat (AC4601-203) is engineered for drivers who demand maximum containment, comfort, and control during high-G maneuvers. Constructed with a high-strength fiberglass-reinforced plastic (FRP) shell, this seat provides a lightweight solution without compromising structural integrity or adding unnecessary weight.

Designed with input from professional racers, the Kilo features an enhanced containment profile including deep thigh bolsters, extended hip support, and a wide shoulder area to lock the driver in place. To combat fatigue during long stints, PRP includes a thick, injection-molded bottom cushion specifically designed to absorb energy and impacts over rough terrain. The recessed shoulder area ensures full compatibility with HANS and other neck restraint systems, allowing for an upright, ergonomic driving position without pushing the shoulders forward.

• Lightweight FRP Shell: High-strength composite construction for durability and improved vehicle responsiveness.
• Superior Containment: Deep bolsters and extended hip support reduce lateral movement and driver fatigue.
• Impact Absorption: High-density foam padding and an energy-absorbing injection-molded bottom cushion for protection against repeated impacts.
• Harness Compatibility: Oversized harness slots accommodate harnesses, communication lines, and pumper hoses.
• Breathable Materials: Features durable, water-resistant vinyl on the bolsters with a breathable sports mesh center to manage heat.
• Occupant Fitment: Comfortably fits drivers with up to approximately a 42-inch waist.
• Manufacturer Part Number: AC4601-203

The PRP Kilo Composite Race Seat (AC4601-201) is engineered for high-performance off-road racing where driver containment and comfort are critical. Featuring a lightweight fiber-reinforced plastic (FRP) composite shell, this seat delivers exceptional strength-to-weight ratios to improve vehicle handling and responsiveness. The high-containment design utilizes deep thigh bolsters, extended hip support, and a wide shoulder area to minimize lateral movement and reduce driver fatigue during high-G cornering.

Built for the rigors of long-distance racing, the Kilo includes a thick, injection-molded bottom cushion specifically designed to absorb impact energy. The recessed shoulder area ensures full compatibility with HANS and other neck restraint systems, allowing the driver to maintain an upright, ergonomic position. Large harness slots are integrated to accommodate racing harnesses, communication lines, and pumper hoses.

• Lightweight FRP composite shell construction
• High-density foam padding for impact protection
• Breathable sports mesh center with water-resistant vinyl bolsters
• Fits drivers comfortably up to approximately a 42-inch waist
• HANS and neck restraint compatible recessed shoulder area
• Oversized slots for harnesses and pumper/comm lines
• Manufacturer Part Number: AC4601-201

The OMP HTE Series Evo is a professional-grade racing seat engineered for maximum driver containment and lateral support. Constructed from a high-strength fiberglass shell, the HTE Series Evo features integrated head containment (halo) to significantly reduce the risk of neck and head injury during side-impact events. The ergonomic design incorporates high side bolsters to keep the driver securely positioned under heavy G-loads.

• Manufacturer Part Number: HA0-0818-A01-071
• Material: Lightweight, rigid fiberglass shell
• Safety Features: Integrated head protection (halo style) and high side bolsters
• Upholstery: Breathable Airtex fabric for improved heat management and comfort
• Cushioning: Removable back and leg cushions for customized fitment
• Mounting: Side-mount configuration for precise height and angle adjustment
• Finish: Sleek black upholstery with OMP branding

The OMP HTE Series Evo Carbon Seat is a professional-grade competition bucket designed for drivers seeking the ultimate balance of weight reduction and structural rigidity. Built around a high-strength carbon fiber shell, this seat provides the precise lateral support and driver feedback necessary for high-performance track and stage use.

• Manufacturer Part Number: HA0-0817-A01-071
• Construction: Ultra-lightweight carbon fiber shell for maximum strength and safety.
• Ergonomics: Optimized Evo-series shape with deep side bolsters for superior lateral containment.
• Upholstery: Finished in durable black fabric with specialized grip inserts in the shoulder and seat areas.
• Installation: Designed for side-mount bracket configurations and compatible with multi-point racing harnesses.

The OMP HTE Series Carbon racing seat is engineered for professional motorsport applications where weight reduction and structural rigidity are paramount. This XL-sized seat features a high-strength carbon shell finished in black, providing a secure and ergonomic environment for larger-framed drivers during high-G maneuvers.

• Lightweight and rigid carbon shell construction
• High-containment side bolsters for lateral support
• Removable cushions to facilitate custom fitment and maintenance
• Integrated large harness slots to accommodate various driver heights
• Manufacturer Part Number: HA0-0779-B01-071

The OMP ARS Series fiberglass seat is engineered for high-performance driving, offering a rigid shell and ergonomic support to ensure maximum vehicle control. Constructed from a lightweight fiberglass shell, this bucket seat provides the structural integrity and lateral stability required for demanding track environments and spirited driving.

• Shell Material: High-strength fiberglass construction
• Series: ARS Series
• Color: Black
• Mounting: Designed for side-mount bracket installation
• Manufacturer Part Number: HA0-0774-B01-071

The ARS Series features deep side bolsters to keep the driver securely positioned during high-G cornering. Finished in a durable black fabric, this seat is an essential upgrade for any driver seeking a professional-grade seating solution for their performance build.

Fits 1984-1991 BMW E30 3-Series (318is, 325e, 325es, 325i, 325is, 325iX) and M3 (Right Side).

This Sparco vehicle-specific seat base provides a secure, direct-fit mounting solution for aftermarket performance seats. Engineered to bolt directly to the factory floor mounting points, it eliminates the need for custom fabrication or drilling during seat installation. This base serves as the essential interface between the vehicle chassis and the seat sliders or side mounts, ensuring proper seat height and alignment.

• Position: Right Side (Passenger)
• Direct-fit installation utilizing factory OE mounting locations
• Heavy-duty steel construction for maximum rigidity and safety
• Designed for use with Sparco seat sliders or side mounts
• Manufacturer Part Number: 600SB034R