Fits select 2002-2017 Honda Accord, CR-V, Crosstour, and Element models, as well as BRZ, FRS, and FT86 platforms equipped with K-Series engines.

The Skunk2 4-Bar MAP (Manifold Absolute Pressure) Sensor is a vital upgrade for high-performance forced induction builds. As a direct plug-in replacement for the factory-issued Honda sensor, this unit allows your ECU to accurately monitor manifold pressure levels far beyond the capabilities of the original equipment. It is engineered to handle up to 43.5 psi of boost, providing the precise data necessary for stable tuning and engine safety in turbocharged or supercharged applications.

Installation is straightforward, as the sensor bolts directly to the factory mounting points and utilizes the OE-style electrical connector for a true plug-and-play experience. No harness modification or adapter wiring is required.

• Direct replacement for factory MAP sensors
• Pressure Range: 4-Bar (Supports forced induction up to 43.5 psi)
• Plug-and-play compatibility with factory wiring harnesses
• Ideal for Honda K-Series engine swaps and boosted builds
• Manufacturer Part Number: 352-05-1500

Note: After installation, the ECU must be recalibrated with the correct 4-bar MAP sensor scaling to ensure proper engine operation.

Fits 2006-2015 Honda Civic Si and S2000 models equipped with K24Z or F22C series engines.

The Skunk2 4-Bar MAP (Manifold Absolute Pressure) sensor is a vital upgrade for high-performance forced induction builds. Designed as a direct, plug-in replacement for the factory Honda sensor, this unit allows your ECU to accurately track manifold pressure well beyond the limits of the original equipment. It provides a clean, linear signal for precise tuning on turbocharged or supercharged applications.

Engineered for reliability in high-heat environments, this sensor eliminates the need for splicing or hack-and-tap installations. Simply swap the OE unit for the Skunk2 352-05-1520 to gain the resolution needed for high-boost management while maintaining a factory-style fit and finish.

• Manufacturer Part Number: 352-05-1520
• Pressure Rating: 4 Bar
• Maximum Boost Support: 43.5 psi
• Installation: Direct plug-in compatible with factory harness
• Engine Compatibility: Honda K24Z and F22C series

Fits select 2002-2017 Acura and Honda models equipped with K-Series engines, including Civic Si, RSX, Accord, CR-V, and Element.

The Skunk2 3-Bar MAP (Manifold Absolute Pressure) sensor is a critical upgrade for forced induction K-Series builds. Designed as a direct plug-and-play replacement for the factory Honda sensor, this unit installs into the factory mounting position without wiring modifications. It provides the expanded pressure range necessary for the ECU to accurately scale fuel and ignition timing at higher manifold pressures.

• Pressure Range: 3-Bar
• Boost Capacity: Handles forced induction up to 29.0 psi
• Installation: Direct OEM replacement, plug-in compatible
• Compatibility: Honda K-Series engines
• Manufacturer Part Number: 352-05-1515

Engineered for high-performance builds, the Cobb 4 Bar MAP Sensor Kit (A22700) provides the accurate pressure tracking required when forced induction levels exceed the range of the factory sensor. This kit is specifically designed for Subaru WRX, Legacy GT, and Forester XT models equipped with a factory plastic intake manifold, ensuring a precise fit and reliable signal for your ECU.

• Expands boost tracking capability up to 4 bar of absolute pressure (approximately 43.5 psi of boost).
• Designed specifically for compatibility with Subaru plastic intake manifolds.
• Provides essential data for accurate speed-density tuning and high-boost safety.
• Includes a plug-and-play harness and necessary hardware for a straightforward installation.
• Manufacturer Part Number: A22700

Designed for Subaru WRX, Legacy GT (LGT), and Forester XT (FXT) models equipped with a plastic intake manifold, the Cobb 4 Bar MAP sensor (A22100) provides the precise manifold absolute pressure data required for high-boost tuning applications. This sensor is an essential upgrade for vehicles exceeding the pressure limits of the factory MAP sensor, allowing the ECU to accurately monitor and manage boost levels up to approximately 43 psi.

• Precise Monitoring: Accurately reads up to 4 Bar absolute pressure (approx. 43 psi of boost).
• High-Performance Tuning: Required for high-horsepower builds where boost levels exceed the factory sensor's scale.
• Fitment-Specific: Engineered specifically for Subaru models with the plastic intake manifold configuration.
• Installation Note: This part number (A22100) is the sensor only and requires a 1/8-inch NPT adapter (sold separately) for installation.
• Manufacturer Part Number: A22100

The Cobb 4 Bar MAP Sensor Upgrade Kit (MPN A12700) provides the increased pressure-sensing range necessary for high-boost Subaru applications. Factory MAP sensors often reach their limit at relatively low boost levels; this upgrade allows the ECU to accurately monitor manifold absolute pressure up to 4 bar (approximately 43.5 psi of boost). By providing a precise signal across a wider range, this kit is essential for maintaining consistent fuel mapping and ignition timing in modified forced-induction engines.

• Replaces the factory MAP sensor with a high-accuracy 4-bar unit
• Supports manifold pressures up to 43.5 psi (absolute pressure)
• Plug-and-play design for a straightforward installation into factory locations
• Essential for high-performance builds requiring custom speed density or high-boost tuning
• Manufacturer Part Number: A12700

Note: Calibration via a Cobb Accessport or custom engine management tuning is required after installation to ensure the ECU correctly interprets the new voltage scale.

Fits Subaru WRX, STI, and Forester XT models.

The Cobb MAP Sensor Adapter (A12600) provides a reliable solution for mounting an aftermarket manifold absolute pressure (MAP) sensor to your vehicle's intake manifold. This component is essential for high-performance builds that require upgraded sensors to monitor boost levels exceeding the factory range. It bolts directly to the factory mounting points, ensuring a secure, airtight seal for accurate data delivery to the ECU.

• Direct fit for Subaru WRX, STI, and Forester XT (FXT)
• Enables installation of high-pressure aftermarket MAP sensors
• Precision-engineered for a leak-free seal on factory manifolds
• Simplifies sensor upgrades for high-boost applications
• Manufacturer Part Number: A12600

Designed for high-boost applications, the Cobb 4 Bar Manifold Absolute Pressure (MAP) sensor provides the precise pressure tracking required for modified Subaru WRX, STI, and Forester XT builds. When factory sensors reach their limit, this 4 bar unit allows the ECU to accurately monitor boost levels up to approximately 43.5 psi, ensuring proper fueling and ignition timing under heavy load.

• Direct-fit replacement for the factory MAP sensor
• Supports boost pressures up to 4 bar (absolute)
• Essential for vehicles exceeding the scaling limits of the OEM sensor
• High-quality internal components for thermal stability and vibration resistance
• Requires ECU recalibration/tuning for proper operation
• Manufacturer Part Number: A12100