The Spectre 6283 Small Shifter Boot provides a professional, finished look for universal floor-mounted shifter installations. This boot effectively seals cabin floor openings to protect against road debris and heat while maintaining a classic performance aesthetic.

• Designed to cover rectangular floor openings up to 4 inches by 5 inches
• Manufactured from durable, flexible black rubber for long-lasting service
• Includes a triple chrome-plated steel installation ring for a high-luster finish and corrosion resistance
• Complete with mounting screws and easy-to-follow instructions for a secure fit
• Manufacturer Part Number: 6283

The RaceQuip Medium 9in Fire Retardant Shifter Boot Kit (871003) is a critical safety component designed to seal the shifter opening in the floorpan or console. This kit acts as a thermal and fire barrier, helping to isolate the cockpit from the drivetrain while preventing heat, smoke, and flames from entering the cabin during a track incident.

• Constructed from fire-retardant materials to enhance driver safety and meet race requirements.
• Medium 9-inch size designed to accommodate standard shifter setups and floor openings.
• Forms a tight seal to block exterior heat, exhaust fumes, and debris from the cockpit.
• Complete kit includes the fire-retardant boot and necessary mounting hardware for a professional installation.
• Manufacturer Part Number: 871003

The RaceQuip 871001 Standard 6-Inch Fire Retardant Shifter Boot Kit is a critical safety component designed to seal the shifter opening in your transmission tunnel. By providing a fire-retardant barrier between the drivetrain and the cockpit, this kit helps prevent smoke, heat, and debris from entering the driver’s compartment during a race or in the event of a mechanical failure.

• Constructed from durable fire-retardant materials to meet safety requirements
• Standard 6-inch diameter fits most universal racing shifter applications
• Includes a sturdy mounting frame and hardware for a secure, professional installation
• Provides a reliable seal to isolate the cockpit from exhaust fumes and track debris
• Manufacturer Part Number: 871001

Fits 1997-2004 Jeep Wrangler (Rubicon, Sahara, SE, Sport, X) equipped with manual transmissions.

Replace a cracked or weathered gear selector seal with this Omix outer shift boot. Over time, factory rubber boots can dry out and tear, allowing road noise, excessive heat, and moisture to enter the cabin through the shifter assembly. This direct replacement is molded from durable, flexible rubber to ensure a factory-style fit and reliable performance on the trail or the highway.

• Direct replacement for OE part number 52078558
• Flexible rubber construction resists cracking and environmental wear
• Designed specifically for manual transmission models
• Manufacturer Part Number: 18886.96
• Limited 5-year warranty

Fits 1982-1983 Jeep CJ5 and 1982-1986 Jeep CJ7 models. This Omix T4 transmission shifter boot is a direct OE replacement designed to restore the seal and appearance of your classic Jeep's interior. Over years of use, factory rubber boots often degrade, crack, or tear, allowing road noise, heat, and moisture to enter the cabin. Built to original equipment specifications, this boot provides a precise fit and durable performance for your T4 manual shifter assembly.

• Direct OE style replacement for a factory-correct fit
• Constructed from high-quality black rubber for flexibility and longevity
• Engineered specifically for T4 manual transmissions
• Protects the cabin from heat, dust, and drafts
• Manufacturer Part Number: 18885.30
• Backed by a limited 5-year manufacturer warranty

Fits select 1971-1975 Jeep Cherokee, CJ5, CJ6, J10, and Wagoneer models equipped with the T14 manual transmission.

Restore the integrity of your transmission tunnel with this Omix shifter boot retaining ring. Designed as a direct OE-style replacement for rusted, bent, or missing factory hardware, this steel ring provides the necessary clamping force to keep your shifter boot securely sealed against the floor pan. Maintaining a proper seal is essential for reducing road noise, heat, and moisture entry into the cabin.

• Direct fit replacement for OE part number 948146
• Manufactured from durable steel with a round profile
• Dimensions: 5 inches wide by 6-1/8 inches long
• Engineered specifically for T14 manual transmission applications
• Recommended for use with shifter boot 18806.02
• Manufacturer Part Number: 18881.19
• Limited 5-year manufacturer warranty

This Omix upper transmission shifter boot is a direct-fit replacement for 1981-1986 Jeep CJ5 and CJ7 models equipped with Warner T4 or T5 manual transmissions. Designed to restore cabin sealing and interior aesthetics, this boot prevents road grime, moisture, and excess heat from entering the vehicle through the shifter opening.

• Direct-fit replacement for OE part number: 5752010
• Fits Warner T4 and T5 4-speed and 5-speed manual gearboxes
• Constructed from high-quality black rubber for long-lasting flexibility
• Position: Upper transmission shifter boot
• Manufacturer Part Number: 18806.03
• Warranty: Limited 5-year manufacturer warranty

Maintenance Tip: If you are replacing a torn or dry-rotted upper boot, inspect your lower boot for wear as well. For the corresponding lower shifter boot, use Omix part number 18885.30.

Fits 1975-1979 Jeep CJ5, CJ6, CJ7, J10, J20, Cherokee, and Wagoneer models equipped with T14, T15, or T150 3-speed manual transmissions.

This Omix replacement transmission shifter boot is engineered to restore the factory seal between your cabin and the drivetrain. Over time, original rubber boots dry rot or tear, allowing heat, moisture, and road noise to enter the interior. Designed to meet or exceed OE quality standards, this direct-fit boot ensures a precise fit and smooth shifter movement for classic Jeep 3-speed applications.

• Direct OE-style replacement for factory-correct fitment
• Molded from durable black rubber for long-term flexibility and weather resistance
• Maintains the original interior appearance and keeps out road debris
• Compatible with shifter boot retainer 18881.19

• Brand: Omix
• Manufacturer Part Number: 18806.02
• Replaces OE Number: 948185
• Dimensions: 5-inch x 6-inch oval
• Bore Diameter: 0.60-inch shifter hole
• Warranty: Limited 5-Year Warranty

Fits 1976-1979 Jeep CJ5 and CJ7 models equipped with the Dana 20 transfer case.

This Omix replacement transfer case shifter boot is designed to restore the look and function of your Jeep's interior while sealing out dust and road noise. Molded from durable black rubber to meet or exceed OE standards, this boot includes an internal metal ring for superior base rigidity and a secure fit against the transmission tunnel or floor pan.

• Direct OE-style replacement for factory part 5353263
• Constructed from high-quality black rubber for long-term durability
• Internal metal ring provides reinforced base mounting and shape retention
• Base Dimensions: 4-1/8 in. x 8-7/8 in. x 3-1/8 in.
• Shifter Hole Diameter: 5/8 in.
• Manufacturer Part Number: 18606.03
• Backed by a Limited 5-Year Warranty

Fits 1946-1971 Jeep and Willys CJ-2, CJ-3, CJ-5, and CJ-6 models equipped with the Dana 18 transfer case.

Restore your vehicle's interior and seal out road debris with this Omix transfer case shifter boot. Specifically engineered for Dana 18 units featuring dual shift levers, this boot serves as a direct-fit replacement for weathered, cracked, or missing factory rubber. It maintains the original OE style and provides a reliable barrier against moisture and dust entering the cabin through the transmission tunnel.

• Direct OE-style replacement for a precise fitment
• Durable black rubber construction resists cracking and environmental wear
• Designed for Dana 18 transfer cases with dual lever configurations
• Replaces original equipment part number: 801058
• Manufacturer Part Number: 18606.01
• Back by a limited 5-year manufacturer warranty

Eliminate unsightly "shift boot sag" after installing an aftermarket shift knob with the Mishimoto Shift Boot Retainer. This CNC-machined adapter bridges the gap between your factory shift boot and the shift knob, ensuring a clean, finished interior look that mimics a factory-fit integrated system. This component is essential for drivers who have upgraded their gear selector but want to maintain a professional cabin aesthetic.

Constructed from heavy-duty 6061 aluminum, this retainer is built for durability and precision fitment. The anodized black finish provides a sleek appearance while resisting wear from daily use. Designed for easy installation, it threads directly onto shifters with an M12x1.25 pitch, providing a secure seat for the boot collar.

• Bridges the gap between aftermarket shift knobs and OEM shift boots to eliminate sag
• Precision CNC-machined from 6061-T6 aluminum
• Durable anodized black finish
• Thread Pitch: M12x1.25
• Includes Mishimoto Lifetime Warranty
• Manufacturer Part Number: MMSK-RET-12125BK

Fits vehicles with shifter rods under 8 inches in length and M12x1.25 threaded shift levers.

Restore the primary touchpoint of your interior with the Mishimoto Shift Boot and Retainer Bundle. Factory shift boots are frequently subjected to UV damage, temperature fluctuations, and constant mechanical flexing, leading to fading or cracking. This kit replaces worn OE components with a premium fabric boot featuring a timeless repeating pattern that integrates seamlessly into any cabin aesthetic.

The included Mishimoto shift boot retainer is CNC-machined from heavy-duty 6061 aluminum and finished in a durable black anodize. It serves a critical function by bridging the gap between an aftermarket shift knob and the boot, ensuring a clean, professional-looking transition. This bundle provides a complete solution for refreshing a neglected shifter assembly with high-quality materials designed for longevity.

• Materials: Premium fabric boot and CNC-machined 6061 aluminum retainer
• Thread Pitch: M12x1.25 (Retainer)
• Compatibility: Universal design fits shifter rods up to 8 inches long
• Finish: Anodized Black retainer with black and gray pattern boot
• Part Number: MMB-RECO-BK
• Warranty: Mishimoto Lifetime Warranty