Fits 1993-1997 Land Rover Defender 90 and 110.

The Bilstein B6 4600 steering damper (part number 24-022354) provides a significant upgrade over factory equipment, specifically engineered to stabilize the steering geometry of the Land Rover Defender. Featuring a 36mm monotube design, this damper absorbs minute movements and reduces the steering vibrations that naturally occur over time or when traveling over uneven terrain. The pressurized gas-monotube construction ensures consistent, fade-free performance by preventing aeration, maintaining precise command and driver comfort.

• 36mm monotube design for superior damping and heat dissipation
• Engineered to reduce steering vibrations and shimmy
• Vehicle-specific ride tuning for the Defender chassis
• Finished in classic Bilstein yellow paint for durability and corrosion resistance
• Direct bolt-on replacement for the OE front steering damper
• Manufacturer Part Number: 24-022354

Fits select 1984-2004 Mercedes-Benz models, including 190D, 190E, C-Class, E-Class, CLK-Class, SL-Class, and SLK-Class (see fitment table for specific engine and submodel details).

The Bilstein B4 OE Replacement Steering Damper (18-140651) is engineered to restore the original driving comfort, handling, and safety of your vehicle's steering system. Designed as a direct-fit replacement for worn factory units, this 22mm monotube damper effectively suppresses steering wheel oscillations and road vibrations. By maintaining the same technical specifications as the original equipment, Bilstein ensures that your vehicle retains its characteristic European driving feel while providing the durability of high-pressure gas pressure technology.

• Replaces worn OE steering dampers to eliminate shimmy and vibration
• Monotube gas pressure construction for consistent damping performance
• Engineered to meet or exceed original equipment standards
• 22mm body diameter for precise fitment and clearance
• Direct-fit installation into factory mounting locations
• Manufacturer Part Number: 18-140651

Fits select 1963-1991 Mercedes-Benz 190, 200, 220, 230, 240, 250, 280, 300, and 350 series models (MPN 18-002461).

Restore original steering precision and handling characteristics with the Bilstein B4 OE Replacement steering damper. Specifically engineered to meet or exceed original equipment standards, this 22mm monotube damper is designed to eliminate steering shimmy and road-induced vibration, providing a stable and controlled driving experience. As a direct replacement for your worn factory unit, it ensures your classic or modern-classic Mercedes-Benz maintains the safety and comfort it had when it left the assembly line.

Built with world-famous Bilstein quality, this damper features a precise construction that resists fade and provides consistent damping performance across various road conditions. It bolts directly to the factory mounting points without modification, making it the ideal choice for restorers and enthusiasts who value authenticity and performance.

• Series: B4 OE Replacement (Steering Damper)
• Damper Type: 22mm Monotube
• Manufacturer Part Number: 18-002461
• Direct-fit replacement for factory steering dampers
• Engineered to restore original driving comfort and safety
• Rigid construction for long-lasting durability

Fits select 1994-2008 Dodge Ram 1500, 2500, and 3500 trucks.

The BD Diesel Steering Box Stabilizer Hardware Kit provides the critical replacement components needed to maintain or install your steering box stabilizer system. This kit specifically addresses wear in the bearing and sector shaft bolt—components that endure high stress in heavy-duty Dodge steering systems. Replacing these worn parts helps eliminate steering wander and protects the steering box from premature failure caused by sector shaft deflection.

• Includes heavy-duty replacement ball bearing
• Includes specialized sector shaft extension bolt
• Designed for 1994-2008 Dodge Ram steering setups
• Restores rigidity to BD Diesel steering box stabilizer assemblies
• Manufacturer Part Number: 1302000

Fits select 1994-2002 Dodge Ram 1500, 2500, and 3500 4WD models (5.9L).

The BD Diesel Steering Stabilizer Bar, also known as "The Wobble Stopper," is engineered to eliminate the common steering wander and wobble issues found in 2nd Gen Dodge Ram trucks. By adding a secondary support point to the steering box sector shaft, this stabilizer virtually eliminates frame flex at the steering box mounting point and compensates for excessive shaft play that often leads to a loose steering feel.

This kit features a greaseable, high-quality bearing for long-term reliability and is finished in a durable silver vein powder coat for superior corrosion resistance. Designed as a direct bolt-on application, installation can be completed in approximately one hour using basic hand tools and the included high-strength mounting hardware.

• Eliminates steering wander and wobble caused by sector shaft play
• Reduces frame flex at the steering box mounting point for a more positive steering feel
• Greaseable bearing allows for easy maintenance and extended service life
• Silver vein powder-coated finish for maximum durability and rust prevention
• Easy bolt-on installation in approximately one hour
• Includes high-strength mounting hardware
• Manufacturer Part Number: 1032004
• Warranty: 12-Month / 24,000-Mile

Fits select 2003-2025 Dodge and Ram 2500/3500 heavy-duty trucks. This BD Diesel Steering Stabilizer Bar is engineered to eliminate steering wander and the notorious "Death Wobble" by addressing the root cause: excessive sector shaft play in the steering box and frame flex at the mounting point.

By providing an additional support point for the steering box shaft, this stabilizer bar ensures a more positive steering feel and extends the life of your steering components. The kit is designed for a straightforward, bolt-on installation that can typically be completed in about one hour with standard hand tools. The assembly features a high-quality greaseable bearing for long-term serviceability and a silver vein powder-coated finish for superior corrosion resistance.

• Eliminates steering wander and wobble caused by steering box shaft play
• Virtually eliminates frame flex at the steering box mounting point
• Silver vein powder-coated finish for durability and rust prevention
• Greaseable bearing for smooth, reliable operation
• Includes high-strength mounting hardware
• Simple bolt-on installation with no welding required
• Manufacturer Part Number: 1032003
• Warranty: 12 months or 24,000 miles

Fits 1994-2002 Dodge Ram 1500, 2500, and 3500 (5.9L).

The BD Diesel Steering Stabilizer Bar, also known as "The Wobble Stopper," is engineered to eliminate steering wander and the notorious "death wobble" common in early Dodge Ram trucks. By supporting the sector shaft and tying the frame horns together, this kit virtually eliminates frame flex at the steering box mounting point. This creates a more positive steering feel and protects the steering box from premature wear caused by excessive shaft play.

• Eliminates steering wander and wobble by stabilizing the steering box sector shaft
• Reduces frame flex at the steering box mounting location
• Greaseable, high-quality bearing ensures reliable, long-term operation
• Durable silver vein powder-coated finish for maximum corrosion resistance
• Direct bolt-on design for easy installation in approximately one hour
• Includes all necessary high-strength mounting hardware
• Manufacturer Part Number: 1032002
• Warranty: 12 Months or 24,000 Miles

Fits 1984-2018 Jeep Cherokee, Grand Cherokee, Wrangler, and Wrangler JK.

The ARB Old Man Emu (OME) steering stabilizer is an essential upgrade for Jeep owners looking to reduce wheel vibration and improve steering feedback. Designed as a direct-fit component for the OME 4WD suspension range, this damper absorbs aggressive steering wheel rotation when navigating rough terrain without hindering the steering wheel's natural return to center. By damping the oscillation often caused by larger tires or worn front-end components, it significantly enhances vehicle control and driver comfort.

Engineered for longevity in off-road environments, the OMESD48 features a multi-lip seal to prevent oil loss and maintain internal pressure. This unit is designed to utilize original stabilizer mounts where appropriate for a straightforward installation process.

• Manufacturer Part Number: OMESD48
• Reduces wheel vibration and improves overall handling and feel
• Multi-lip seal prevents oil loss to ensure consistent damping performance
• Includes a durable dust boot to protect the piston rod from debris
• Compatible with factory mounting locations on select Jeep applications

Fits select 2007-2014 Toyota Land Cruiser Base models.

An essential component of the Old Man Emu 4WD suspension system, this steering stabilizer is engineered to reduce the impact of wheel vibration while significantly improving steering feel, handling, and vehicle control. The OMESD47 is designed to dampen the aggressive rotation of the steering wheel over rough terrain without affecting the steering wheel’s natural return to center.

• Part Number: OMESD47
• Multi-Lip Seal: High-quality seal construction prevents oil loss and ensures long-term performance under heavy use.
• Direct Fit: Designed to utilize original stabilizer mounts where appropriate for a straightforward installation.
• Optimized Performance: Specifically tuned for the chassis dynamics of Land Cruiser 76, 78, and 79 V8 series.

Fits select 1984-2006 Jeep Cherokee, Wrangler, and Grand Cherokee Left Hand Drive (LHD) models.

The ARB Old Man Emu (OME) Steering Damper is an essential component for any 4WD suspension setup, specifically engineered to mitigate wheel vibration and enhance steering feel and control. This stabilizer effectively dampens the aggressive rotation of the steering wheel when navigating rough terrain, reducing driver fatigue without hindering the steering wheel's natural return to center.

• Precision Damping: Reduces shimmy and feedback caused by larger tires or uneven off-road surfaces.
• Multi-Lip Seal: Built with a multi-lip seal to prevent oil loss and maintain performance in harsh environments.
• OEM Integration: Designed to utilize original stabilizer mounting points where appropriate for a reliable fit.
• LHD Specific: Engineered specifically for Left Hand Drive vehicle configurations.
• Part Number: OMESD40

Fits 1985-1996 Toyota 4Runner and 1986-1994 Toyota Pickup models (including Turbo, SR5, and DLX trims).

As an essential component of the Old Man Emu 4WD suspension system, the OMESD33 steering stabilizer is engineered to significantly reduce wheel vibration and improve steering feel, handling, and vehicle control. Designed for the rigors of off-road use, this damper reduces aggressive steering wheel rotation on rough terrain without compromising the steering wheel return-to-center.

• Replaces or upgrades factory steering stabilizer (uses original mounts where appropriate)
• Heavy-duty construction helps eliminate wheel shimmy and steering kickback
• Features a multi-lip seal to prevent oil loss and ensure long-term durability
• Improves overall driver feedback and comfort on washboard roads
• Manufacturer Part Number: OMESD33

Fits select 1993-1997 Land Rover Defender 90 and 110 models.

The Old Man Emu (OME) steering stabilizer (OMESD32) is a critical component for maintaining control and comfort in your 4WD Land Rover. Engineered to reduce wheel vibration and steering chatter, this damper significantly improves vehicle feel and handling. It is designed to mitigate aggressive steering wheel rotation when navigating rough terrain or off-road trails without hindering the steering wheel's natural return to center.

• Optimized Control: Minimizes wheel shimmy and vibrations for a more stable driving experience.
• Multi-Lip Seal: High-performance seal prevents oil loss and ensures long-lasting durability under harsh conditions.
• OE Compatibility: Can be installed using original stabilizer mounts where appropriate for a straightforward setup.
• Reliable Performance: Part of the proven OME 4WD suspension range designed for rugged off-road use.

Vehicle Fitment:

Fits 1986-1995 Suzuki Samurai (Base, JA, JL, JS, JX, and JX SE).

As an essential component of the Old Man Emu 4WD suspension system, this steering stabilizer is engineered to reduce wheel vibration and enhance overall handling and control. It effectively dampens aggressive steering wheel rotation over rough terrain and washboard surfaces without affecting the steering wheel's natural return to center. This is a critical upgrade for maintaining stability and reducing driver fatigue in short-wheelbase 4x4 vehicles.

• Precision Dampening: Specifically tuned to reduce feedback and shimmy through the steering rack.
• Multi-Lip Seal: Heavy-duty internal seal prevents oil loss and ensures consistent performance under high thermal loads.
• Direct Fitment: Designed to utilize original stabilizer mounts where appropriate for a simplified installation process.
• Durable Construction: Built to withstand the rigors of off-road use and oversized tire setups.
• Manufacturer Part Number: OMESD30

Fits 1980-1997 Toyota Land Cruiser and 1996-1997 Lexus LX450 Base models.

As a critical component of the Old Man Emu 4WD suspension system, the OMESD24 steering stabilizer is engineered to significantly reduce wheel vibration and enhance overall vehicle handling and control. This damper is specifically tuned to manage the aggressive rotation of the steering wheel when traversing rough terrain or corrugated roads without compromising the steering wheel’s natural return-to-center feel.

Built for durability in demanding off-road conditions, this stabilizer features a multi-lip seal to prevent oil loss and ensure consistent performance. The design allows for a straightforward installation, utilizing original stabilizer mounts where appropriate for a secure fit.

• Replaces or upgrades factory steering stabilizers
• Reduces steering kickback and driver fatigue on rough terrain
• Multi-lip seal design prevents pressure loss and fluid leaks
• Compatible with original stabilizer mounting points
• Manufacturer Part Number: OMESD24

Fits 1960-1985 Toyota Land Cruiser Base models.

As a critical component of the Old Man Emu 4WD suspension system, the OMESD23 steering stabilizer is engineered to reduce wheel vibration and improve steering feel, handling, and vehicle control. This damper effectively minimizes the aggressive rotation of the steering wheel when navigating rough terrain without hindering the steering wheel's natural return to center.

• Specifically tuned for 1960-1985 Toyota Land Cruiser applications
• Multi-lip seal design prevents oil loss and extends service life
• Designed to utilize original stabilizer mounts where appropriate for a straightforward installation
• Reduces driver fatigue by damping steering feedback on washboard roads and trails
• Manufacturer Part Number: OMESD23

Fits 1979-1985 Toyota Pickup and 1984-1985 Toyota 4Runner (Select DLX, SR5, and Turbo models).

As a critical component of the Old Man Emu 4WD suspension system, the OMESD21 steering stabilizer is engineered to reduce wheel vibration and enhance steering feel, handling, and vehicle control. This damper effectively absorbs the aggressive rotation and kickback felt through the steering wheel on washboard tracks and rough terrain, ensuring a more stable driving experience without impeding the steering wheel's natural return-to-center.

• Durable Construction: Features a multi-lip seal designed to prevent oil loss and maintain consistent damping performance under heavy use.
• Enhanced Stability: Reduces steering shimmy and feedback, which is particularly beneficial for vehicles running larger off-road tires.
• Installation: Designed to utilize original stabilizer mounts where appropriate for efficient integration into the factory steering geometry.
• Part Number: OMESD21

Fits select 1970-2014 Land Rover Discovery and Range Rover models. This Old Man Emu steering stabilizer is an essential component for any 4WD suspension system, designed to significantly reduce wheel vibration and improve steering feel, handling, and vehicle control. It effectively minimizes the aggressive rotation of the steering wheel when traversing rough terrain or off-road washboards without hindering the natural return-to-center of the steering wheel.

• Replaces or upgrades factory steering stabilizers to improve front-end stability.
• Multi-lip seal design prevents oil loss and maintains consistent damping performance.
• Mounts to original stabilizer locations for a straightforward installation where appropriate.
• Reduces driver fatigue by dampening feedback through the steering rack.
• Manufacturer Part Number: OMESD11

Fits 1999-2004 Land Rover Discovery Series II models (including HSE, S, SD, SE, and LE).

As an essential component of the Old Man Emu 4WD suspension range, this steering stabilizer is engineered to reduce wheel vibration while improving the tactile feel and control of your vehicle. It effectively dampens aggressive steering wheel rotation encountered on rough terrain without compromising the natural return-to-center feel of the steering system.

• Reduces wheel vibration and improves handling characteristics
• Multi-lip seal design prevents oil loss for consistent performance
• Designed to work with original stabilizer mounts where appropriate
• Integrates seamlessly with OME suspension components
• Manufacturer Part Number: OMESD02