Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Welcome to Atlus Automotive
Main menu
-
Performance
- Performance
-
Intake & Exhaust
- Intake & Exhaust
- Air Intake Systems
- Cold Air Intakes
- Air Intake Components
- Air Filters
- Air Filters - Drop In
- Air Filters - Direct Fit
- Air Filters - Universal Fit
- Pre-Filters
- Recharge Kits
- OE Replacement Air Intake Components
- Exhaust, Mufflers & Tips
- Catback
- Axle Back
- Muffler
- Tips
- Headers & Manifolds
- Connecting Pipes
- Catalytic Converter Direct Fit
- Catalytic Converter Universal
- Exhaust Collector
- Merge Collectors
-
Engine Upgrades
- Engine Upgrades
- Engine Components
- Camshafts
- Valve Springs, Retainers
- Head Gaskets
- Head Stud & Bolt Kits
- Main Stud & Bolt Kits
- Gasket Kits
- Engine Mounts
- Oil Catch Cans
- Oil Separators
- Throttle Bodies
- Throttle Body Spacers
- Crankshaft Dampers
- Valves
- Piston Rings
- Piston Sets - Forged - 4cyl
- Piston Sets - Cast - 4cyl
- Connecting Rods - 4Cyl
- Rotating Assemblies
- Stroker Kits
-
Turbo & Cooling
-
Fuel, Ignition & Tuning
-
Suspension & Handling
- Suspension & Handling
-
Lowering & Coilovers
-
Arms, Links & Alignment
-
Lift & Off-Road Suspension
-
Chassis & Bracing
-
Wheels & Tires
- Wheels & Tires
-
Wheels
-
Tires
-
Drivetrain & Clutch
-
Brakes
- Brakes
-
Pads & Rotors
-
Brake Kits & Calipers
-
Lines, Fluid & Hardware
-
Exterior & Lighting
- Exterior & Lighting
-
Lighting
-
Exterior Styling
-
Bumpers & Protection
-
Interior & Electronics
- Interior & Electronics
-
Interior Upgrades
-
Gauges & Electronics
-
Audio & Safety
-
Overland & Utility
- Overland & Utility
-
Bed Covers & Bed Gear
-
Steps, Racks & Storage
-
Trail & Towing
-
Maintenance & Garage
- Maintenance & Garage
-
Oil, Fluids & Filters
-
Detailing & Car Care
-
Tools & Fabrication
Your cart
Choose your Location
-
Atlus
1340 Cobb Dr, Unit 1, Eustis, FL 32736
352-234-4458
Mon – Fri: 8:30 am – 4:30 pm
Sat: 9:00 am – 2:00 pm
Sun: Closed
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
13097 products
13097 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
Eibach's PRO-PLUS KIT combines our legendary PRO-KIT lowering springs with our ANTI-ROLL-KIT front and rear stabilizer bars for a tuned suspension system.
WarrantyInstallation Instructions
- Performance Springs and Sway Bars = Superior Handling for the Serious Enthusiast.
- Simple Bolt-On, No Modifications: Install, Set the Alignment and Carve.
- Stop Quicker, Corner Faster and Better MPG!
- PRO-KIT + ANTI-ROLL-KIT = PRO-PLUS.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2018-2021 | Kia | Stinger | GT |
Improve your car's performance and handling with the Eibach Anti-Roll-Kit. This kit is designed to reduce body roll when cornering, resulting in improved stability, better handling, and increased driver confidence. The kits include front and/or rear stabilizer bars made from high-strength steel for durability and precision along with all necessary mounting hardware. Installing this kit is a great way to take your driving experience to the next level!
WarrantyInstallation Instructions
- Engineered and Tested for Each Vehicle Application:
- Compatible with OEM and Performance Setups:
- Precision-Tuned for Balance and Control:
- Increased Vehicle Stability:
- Made by Eibach in the USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016-2017 | Lexus | IS200t | F Sport |
| 2025 | Lexus | IS300 | Base |
| 2018-2020,2024-2025 | Lexus | IS300 | F Sport |
| 2025 | Lexus | IS300 | F Sport Design |
| 2014-2025 | Lexus | IS350 | F Sport |
| 2025 | Lexus | IS350 | F Sport Design |
Improve your car's performance and handling with the Eibach Anti-Roll-Kit. This kit is designed to reduce body roll when cornering, resulting in improved stability, better handling, and increased driver confidence. The kits include front and/or rear stabilizer bars made from high-strength steel for durability and precision along with all necessary mounting hardware. Installing this kit is a great way to take your driving experience to the next level!
WarrantyInstallation Instructions
- Engineered and Tested for Each Vehicle Application:
- Compatible with OEM and Performance Setups:
- Precision-Tuned for Balance and Control:
- Increased Vehicle Stability:
- Made by Eibach in the USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019 | Genesis | G70 | Advanced |
| 2020-2021,2023-2026 | Genesis | G70 | Base |
| 2019 | Genesis | G70 | Design |
| 2019 | Genesis | G70 | Dynamic |
| 2019-2021 | Genesis | G70 | Elite |
| 2019-2021,2023 | Genesis | G70 | Prestige |
| 2019-2021 | Genesis | G70 | Sport |
| 2023-2026 | Genesis | G70 | Sport Advanced |
| 2023-2026 | Genesis | G70 | Sport Prestige |
| 2019 | Kia | Stinger | Base |
| 2018-2021 | Kia | Stinger | GT |
| 2020-2021 | Kia | Stinger | GT-Line |
| 2019-2021 | Kia | Stinger | GT1 |
| 2019-2021 | Kia | Stinger | GT2 |
| 2019 | Kia | Stinger | GTS |
| 2019 | Kia | Stinger | Premium |
Improve your car's performance and handling with the Eibach Anti-Roll-Kit. This kit is designed to reduce body roll when cornering, resulting in improved stability, better handling, and increased driver confidence. The kits include front and/or rear stabilizer bars made from high-strength steel for durability and precision along with all necessary mounting hardware. Installing this kit is a great way to take your driving experience to the next level!
WarrantyInstallation Instructions
- Engineered and Tested for Each Vehicle Application:
- Compatible with OEM and Performance Setups:
- Precision-Tuned for Balance and Control:
- Increased Vehicle Stability:
- Made by Eibach in the USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2006-2012 | Honda | Civic | DX |
| 2006-2015 | Honda | Civic | EX |
| 2009-2015 | Honda | Civic | EX-L |
| 2006-2012 | Honda | Civic | GX |
| 2012-2015 | Honda | Civic | HF |
| 2006-2015 | Honda | Civic | LX |
| 2009-2011 | Honda | Civic | LX-S |
| 2008 | Honda | Civic | MUGEN Si |
| 2013-2015 | Honda | Civic | Natural Gas |
| 2015 | Honda | Civic | SE |
| 2006-2015 | Honda | Civic | Si |
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2003-2005 | Mitsubishi | Lancer | Evolution |
| 2005 | Mitsubishi | Lancer | Evolution MR |
| 2005 | Mitsubishi | Lancer | Evolution RS |
$1,983.40
It doesn’t take much lift to get a Super Duty to look impressive! This Cognito 2" Performance Leveling Kit has all the components to do just that. Leveling the stance only requires 2" of lift up front, and then up to 37" tires will fit and fill up the fender wells proportionately. The Cognito coil springs are dual rate, slightly softer than stock with a progressive rate as they compress, replacing the OEM single rate springs and providing 2" of lift. When you lift a solid axle truck, the track bar angle increases, and since the OEM track bar is fixed in length, the axle is shifted toward the left side of the truck. This Cognito package includes a heavy-duty, adjustable-length track bar assembly to provide a long-lasting durable track bar that is also adjustable to get the front axle centered under the frame at ride height.This Performance package is defined by the Fox 2.0 Perfromance Series IFP shocks. These shocks are the most popular on the market in this price range, perform much better than the OEM shocks, and look much better also.37" tires fit nicely, since we are talking about a dually here, you will want to refer to the wheel manufacturer of your choice for proper width and back spacing, be sure to have chosen the tire brand, model, and size you are going to use before contacting the wheel company. If you choose to use stock wheels, you will want to stay with a narrow tire, or decide to use a wheel spacer up front, and also in between the rear wheels to keep the rear tires from touching each other. You want your truck to ride as good as stock, how about better than stock? Make sure you choose a quality name brand tire with the appropriate load rating, and you will enjoy a ride quality with this Cognito Performance kit that is better than stock.
- Fox 2.0 Performance Series IFP Monotube front and rear shocks
- Maintains Adequate Droop Travel for Superior Ride Quality
- Bump Stop Spacer for bottom out protection
- Dual rate progressive-rate coil springs
- Levels the vehicle front to rear
- Heavy Duty adjustable track bar
- Yields 2 inches of front lift
- 4-hour DIY Install time
- Made in the USA
$699.98
Fits as stock replacement or leveled and lifted applications where an upgrade is desired to provide better performance, style, and function.The boxed sheet metal arms are powder coated semi-gloss black. Ball joints are included as well as maintenance-free pivot bushings.Ample droop travel is required for good ride quality and all suspension components to last and work properly. These arms feature corrected ball joint angle for lifted and leveled applications. allowable droop travel is also improved with the design of these arms. Made in the USA.
- Maintenance-free pivot bushings
- Powder-coated semi-gloss black
- Maintenance-free ball joints
- Corrected ball joint angle
- 1.5-hour DIY install time
- Made in The USA
- Added caster
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2020-2025 | Chevrolet | Silverado 2500 HD | Custom |
| 2020-2025 | Chevrolet | Silverado 2500 HD | High Country |
| 2020-2025 | Chevrolet | Silverado 2500 HD | LT |
| 2020-2025 | Chevrolet | Silverado 2500 HD | LTZ |
| 2020-2025 | Chevrolet | Silverado 2500 HD | WT |
| 2020-2025 | Chevrolet | Silverado 3500 HD | High Country |
| 2020-2025 | Chevrolet | Silverado 3500 HD | LT |
| 2020-2025 | Chevrolet | Silverado 3500 HD | LTZ |
| 2020-2025 | Chevrolet | Silverado 3500 HD | WT |
| 2020-2025 | GMC | Sierra 2500 HD | AT4 |
| 2020-2021 | GMC | Sierra 2500 HD | Base |
| 2020-2025 | GMC | Sierra 2500 HD | Denali |
| 2024-2025 | GMC | Sierra 2500 HD | Denali Ultimate |
| 2022-2025 | GMC | Sierra 2500 HD | Pro |
| 2020-2025 | GMC | Sierra 2500 HD | SLE |
| 2020-2025 | GMC | Sierra 2500 HD | SLT |
| 2020-2025 | GMC | Sierra 3500 HD | AT4 |
| 2020-2021 | GMC | Sierra 3500 HD | Base |
| 2020-2025 | GMC | Sierra 3500 HD | Denali |
| 2024-2025 | GMC | Sierra 3500 HD | Denali Ultimate |
| 2022-2025 | GMC | Sierra 3500 HD | Pro |
| 2020-2025 | GMC | Sierra 3500 HD | SLE |
| 2020-2025 | GMC | Sierra 3500 HD | SLT |
$369.95
We've bundled everything you need in a leveling kit for your Silverado/Sierra 1500 2WD/4WD/1500 Denali with high quality Cognito components.There's no guesswork. Cognito components are engineered, manufactured and assembled in the USA. The Cognito 2 Inch Economy Leveling Lift Kit includes the .75 Inch Strut Spacer Kit, .5 Inch Preload Spacer Kit and 1 inch Block and U Bolt Kit- all with hardware included.This leveling kit utilizes your truck's factory upper control arms, but we recommend upgrading to Cognito upper control arms for increased durability and part longevity. The .75 Inch Strut Spacers and .5 Inch Steel Preload Spacers are constructed out of heavy duty steel and finished with a durable semi-gloss black power coating.The Cognito 1 inch Block and U Bolt Kit includes 1 inch tall powder coated semi-gloss black steel blocks and heavy duty zinc plated U Bolts.
- Warning! - Not compatible with trucks equipped with composite mono-leaf rear spring.
- Fits up to 33 x 11.5-Inch tire and 9-inch wide wheel with 5.75-Inch back space
- Enhances the trucks appearance and reduce the factory nose down rake
- Maintains Adequate Droop Travel for Superior Ride Quality
- Yields 2 Inches of front lift and 1 inch of rear lift
- Cognito 1 inch Block and U Bolt Kit
- .5 Inch Preload Spacer Kit
- Uses OE upper control arms
- .75 Inch Strut Spacer Kit
- 3-hour DIY install time
- Made in the USA
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019-2025 | Chevrolet | Silverado 1500 | Custom |
| 2019-2025 | Chevrolet | Silverado 1500 | Custom Trail Boss |
| 2019-2025 | Chevrolet | Silverado 1500 | High Country |
| 2019-2025 | Chevrolet | Silverado 1500 | LT |
| 2019-2025 | Chevrolet | Silverado 1500 | LT Trail Boss |
| 2019-2025 | Chevrolet | Silverado 1500 | LTZ |
| 2023-2025 | Chevrolet | Silverado 1500 | PPV |
| 2019-2025 | Chevrolet | Silverado 1500 | RST |
| 2019-2021 | Chevrolet | Silverado 1500 | SSV |
| 2019-2025 | Chevrolet | Silverado 1500 | WT |
| 2022-2025 | Chevrolet | Silverado 1500 | ZR2 |
| 2019-2021 | GMC | Sierra 1500 | Base |
| 2019-2025 | GMC | Sierra 1500 | Denali |
| 2022-2025 | GMC | Sierra 1500 | Denali Ultimate |
| 2019-2025 | GMC | Sierra 1500 | Elevation |
| 2022-2025 | GMC | Sierra 1500 | Pro |
| 2019-2025 | GMC | Sierra 1500 | SLE |
| 2019-2025 | GMC | Sierra 1500 | SLT |
These arms are meticulously designed and crafted using CAD and CNC machining. They are made from aerospace quality 6061 billet aluminum and undergo bead blasting, Type II anodizing, and laser etching for a sleek gun metal gray finish with our Camburg logo. The larger FK 1.25" uniball with a PTFE liner provides increased strength and mis-alignment for maximum wheel travel. The arms are made in the USA and are superior to cheaper imports. Model specific spacers machined from heat-treated stainless steel adapt the uniball to the spindle/knuckle without drilling or modifications. The 1.25" uniball allows for a larger bolt with a low profile press-on cap to resist the elements. The use of FK 7/8" chromoly heim joints allows for additional camber and caster adjustment while eliminating flexing/deflection and binding. AN/Mil-spec hardware, including a single pinch bolt and secondary jam nut, ensures secure heim joint performance in off-road conditions. The new V2 design increases usable wheel travel, corrects camber and caster, and eliminates weak factory ball-joints. All necessary hardware is included for installation. These arms are designed for 1-3" of lift.
Installation Instructions- Eliminates weak factory ball-joints
- Increases usable wheel travel
- Corrects camber and caster
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2025 | Toyota | Sequoia | 1794 Edition |
| 2023-2025 | Toyota | Sequoia | Capstone |
| 2023-2025 | Toyota | Sequoia | Limited |
| 2023-2025 | Toyota | Sequoia | Platinum |
| 2023-2025 | Toyota | Sequoia | SR5 |
| 2023-2025 | Toyota | Sequoia | TRD Pro |
| 2022-2025 | Toyota | Tundra | 1794 Edition |
| 2022-2025 | Toyota | Tundra | Capstone |
| 2022-2025 | Toyota | Tundra | Limited |
| 2022-2025 | Toyota | Tundra | Platinum |
| 2022-2025 | Toyota | Tundra | SR |
| 2022-2025 | Toyota | Tundra | SR5 |
| 2022-2025 | Toyota | Tundra | TRD Pro |
You asked for it! Now we offer our KINETIK billet upper arms anodized to match your King shocks to really show off your suspension. Countless hours were spent designing and refining these arms to the point where they met our high standards. CAD designing and machining gave us the ability to bring some new design elements and features to the table. We CNC machine these from aerospace quality 6061 billet aluminum, then send them out to be bead blasted, Type II anodized blue and have our Camburg logo laser etched. These can allow for more wheel travel with extended length coilovers and we correct the suspension geometry with an increase in caster to improve the handling both on and off-road. This gives your truck a much more predictable and precision feel, especially once you leave the pavement and hit the dirt. Like our tubular arms we use a larger FK 1.25” uniball that has a PTFE liner for increased strength and mis-alignment for maximum useable wheel travel. Made in the USA these are far superior to the cheaper and smaller imports other companies use. Adapting the uniball to the spindle/knuckle is done using model specific spacers that match the factory taper precisely. These are machined from heat-treated stainless steel and are a one piece design for increased strength. No drilling or modifications are needed. The 1.25” uniball gives us the ability to run a 12 point bolt with a low profile press-on uniball cap to resist the elements. Using larger and stronger FK 7/8” chromoly heim joints allows for additional camber and caster adjustment if needed. Using a heim joint also eliminates flexing/deflection under hard use and braking with zero binding when in use. Using AN/Mil-spec hardware we have a single pinch bolt and secondary jam nut to insure the heim is secure with the rigors of off-road use.
Installation Instructions- Eliminates weak factory ball-joints
- Increases usable wheel travel
- Corrects camber and caster
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2008-2022 | Toyota | Sequoia | Limited |
| 2021-2022 | Toyota | Sequoia | Nightshade |
| 2008-2022 | Toyota | Sequoia | Platinum |
| 2008-2022 | Toyota | Sequoia | SR5 |
| 2020-2022 | Toyota | Sequoia | TRD Pro |
| 2018-2022 | Toyota | Sequoia | TRD Sport |
| 2014-2021 | Toyota | Tundra | 1794 Edition |
| 2007-2013 | Toyota | Tundra | Base |
| 2007-2021 | Toyota | Tundra | Limited |
| 2021 | Toyota | Tundra | Nightshade |
| 2010-2021 | Toyota | Tundra | Platinum |
| 2014-2021 | Toyota | Tundra | SR |
| 2007-2011,2014-2021 | Toyota | Tundra | SR5 |
| 2021 | Toyota | Tundra | Trail |
| 2015-2017,2019-2021 | Toyota | Tundra | TRD Pro |
$4,839.20
Old Man Emu brings racing technology to every day adventures: BP-51 (Bypass 51mm diameter bore) shock absorbers feature revolutionary, patent pending technology developed to deliver unparalleled on and off road performance. Developed and extensively tested under the harshest conditions in Australia, these big bore, position sensitive bypass shock absorbers with remote reservoir are designed to bolt onto your vehicle without any vehicle modifications and combine considerable ride comfort around town with significant amounts of end-zone damping for exceptional chassis control and handling off road. The damping performance is easily adjustable across a wide range of rebound and compression, resulting in significant changes to the ride performance of your vehicle, enabling a custom tune to suit the conditions and vehicle set up. The body, reservoir and components are all made from 6061 T6 aluminum, Type 3 40 micron hard anodized ensuring exceptional heat dissipation, corrosion resistance and resistance to stone damage. Not only designed, developed and tested entirely by ARB's team of Old Man Emu ride engineers, all BP-51 shock absorbers are manufactured in-house by ARB. In order to achieve this, significant investment has been made in state of the art machinery providing ARB total control of the manufacturing process to ensure the highest possible quality.
Warranty- Accommodates The Additional Vehicle Weight
- A 6061 grade aluminum top hat
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2005-2015 | Toyota | Tacoma | Base |
| 2016-2023 | Toyota | Tacoma | Limited |
| 2005-2015 | Toyota | Tacoma | Pre Runner |
| 2016-2023 | Toyota | Tacoma | SR |
| 2016-2023 | Toyota | Tacoma | SR5 |
| 2021 | Toyota | Tacoma | Trail |
| 2016-2023 | Toyota | Tacoma | TRD Off-Road |
| 2015,2017-2023 | Toyota | Tacoma | TRD Pro |
| 2016-2023 | Toyota | Tacoma | TRD Sport |
| 2005-2013 | Toyota | Tacoma | X-Runner |
$4,919.20
Old Man Emu brings racing technology to every day adventures: BP-51 (Bypass 51mm diameter bore) shock absorbers feature revolutionary, patent pending technology developed to deliver unparalleled on and off road performance. Developed and extensively tested under the harshest conditions in Australia, these big bore, position sensitive bypass shock absorbers with remote reservoir are designed to bolt onto your vehicle without any vehicle modifications and combine considerable ride comfort around town with significant amounts of end-zone damping for exceptional chassis control and handling off road. The damping performance is easily adjustable across a wide range of rebound and compression, resulting in significant changes to the ride performance of your vehicle, enabling a custom tune to suit the conditions and vehicle set up. The body, reservoir and components are all made from 6061 T6 aluminum, Type 3 40 micron hard anodized ensuring exceptional heat dissipation, corrosion resistance and resistance to stone damage. Not only designed, developed and tested entirely by ARB's team of Old Man Emu ride engineers, all BP-51 shock absorbers are manufactured in-house by ARB. In order to achieve this, significant investment has been made in state of the art machinery providing ARB total control of the manufacturing process to ensure the highest possible quality.
Warranty- Accommodates The Additional Vehicle Weight
- A 6061 grade aluminum top hat
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2005-2015 | Toyota | Tacoma | Base |
| 2016-2023 | Toyota | Tacoma | Limited |
| 2005-2015 | Toyota | Tacoma | Pre Runner |
| 2016-2023 | Toyota | Tacoma | SR |
| 2016-2023 | Toyota | Tacoma | SR5 |
| 2021 | Toyota | Tacoma | Trail |
| 2016-2023 | Toyota | Tacoma | TRD Off-Road |
| 2015,2017-2023 | Toyota | Tacoma | TRD Pro |
| 2016-2023 | Toyota | Tacoma | TRD Sport |
| 2005-2013 | Toyota | Tacoma | X-Runner |
$4,159.25
Old Man Emu brings racing technology to every day adventures: BP-51 (Bypass 51mm diameter bore) shock absorbers feature revolutionary, patent pending technology developed to deliver unparalleled on and off road performance. Developed and extensively tested under the harshest conditions in Australia, these big bore, position sensitive bypass shock absorbers with remote reservoir are designed to bolt onto your vehicle without any vehicle modifications and combine considerable ride comfort around town with significant amounts of end-zone damping for exceptional chassis control and handling off road. The damping performance is easily adjustable across a wide range of rebound and compression, resulting in significant changes to the ride performance of your vehicle, enabling a custom tune to suit the conditions and vehicle set up. The body, reservoir and components are all made from 6061 T6 aluminum, Type 3 40 micron hard anodized ensuring exceptional heat dissipation, corrosion resistance and resistance to stone damage. Not only designed, developed and tested entirely by ARB's team of Old Man Emu ride engineers, all BP-51 shock absorbers are manufactured in-house by ARB. In order to achieve this, significant investment has been made in state of the art machinery providing ARB total control of the manufacturing process to ensure the highest possible quality.
Warranty- Accommodates Additional Vehicle Weight
- BP-51 Lift Kit
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2005-2015 | Toyota | Tacoma | Base |
| 2016-2023 | Toyota | Tacoma | Limited |
| 2005-2015 | Toyota | Tacoma | Pre Runner |
| 2016-2023 | Toyota | Tacoma | SR |
| 2016-2023 | Toyota | Tacoma | SR5 |
| 2021 | Toyota | Tacoma | Trail |
| 2016-2023 | Toyota | Tacoma | TRD Off-Road |
| 2015,2017-2023 | Toyota | Tacoma | TRD Pro |
| 2016-2023 | Toyota | Tacoma | TRD Sport |
| 2005-2013 | Toyota | Tacoma | X-Runner |
$153.88
Suffering uneven tire wear, unbalanced braking or a less predictable rear end while cornering. It could be your control arm bushings have failed. Benefit Note: Essential servicing kit for your vehicle featuring key hard working rear control arm bushings to replace worn and tired factory units. Whiteline's signature black bushings are made tough and offer outstanding abrasion resistance, high load bearing capability (4WD's, trucks and towing), flexibility, increased tensile strength and chemical resistance to oil, grease, ozone and weathering.
Installation Instructions- The latest in material formulation technology boasts resistance to oil, grease, ozone and weathering.
- Install guide included providing detailed instructions on how to install your new purchase .
- Hand-picked bushings and/or alignment, geometry products best suiting your vehicle.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1999 | Mazda | Miata | 10th Anniversary |
| 1990-1997,1999-2005 | Mazda | Miata | Base |
| 1993 | Mazda | Miata | LE |
| 2000-2005 | Mazda | Miata | LS |
| 1994-1997 | Mazda | Miata | M Edition |
| 2004-2005 | Mazda | Miata | Mazdaspeed |
| 1991,2000-2003 | Mazda | Miata | SE |
| 2003 | Mazda | Miata | Shinsen |
| 1997 | Mazda | Miata | STO |
$12.88
A critical service item for any leaf sprung vehicle. High kilometres and heavy load carrying causes excessive wear on rubber bushings. Nolathane bushings are made tough and offer outstanding abrasion resistance, high load bearing capability (4WD's, utes and towing), flexibility, increased tensile strength and chemical resistance to oil, grease, ozone and weathering.
Installation Instructions- Engineered fit supports consistent stability and handling performance
- High-quality material helps resist wear and extend service life
- Reduces noise and vibration for a smoother and quieter ride
- Kit contains 4 Bushings, 2 Tubes
$194.88
The Whiteline kit replaces the bushings in the rear subframe to dramatically reduce rear cross member misalignment and movement which allows a more positive feel from the rear end during cornering. Recommended for motorsport applications.
Installation Instructions- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Whiteline's latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
- Internal grease reservoirs provide continual self lubrication for optimum friction management.
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2003-2007 | INFINITI | G35 | Base |
| 2007 | INFINITI | G35 | Journey |
| 2007 | INFINITI | G35 | Sport |
| 2004-2007 | INFINITI | G35 | X |
| 2005 | Nissan | 350Z | 35th Anniversary Edition |
| 2003-2008 | Nissan | 350Z | Base |
| 2003-2009 | Nissan | 350Z | Enthusiast |
| 2005-2009 | Nissan | 350Z | Grand Touring |
| 2007-2008 | Nissan | 350Z | Nismo |
| 2003-2005 | Nissan | 350Z | Performance |
| 2003-2009 | Nissan | 350Z | Touring |
| 2003-2006 | Nissan | 350Z | Track |
$56.88
A critical service item for any leaf sprung vehicle. High kilometres and heavy load carrying causes excessive wear on rubber bushings. Whiteline's signature black bushings are made tough and offer outstanding abrasion resistance, high load bearing capability (4WD's, utes and towing), flexibility, increased tensile strength and chemical resistance to oil, grease, ozone and weathering.
- Engineered fit supports consistent stability and handling performance
- High-quality material helps resist wear and extend service life
- Reduces noise and vibration for a smoother and quieter ride
- Kit contains 4 Bushings, 2 Tubes, 2 Greaseable Pins
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2013-2019 | Nissan | Frontier | Desert Runner |
| 2005-2010 | Nissan | Frontier | LE |
| 2005-2008 | Nissan | Frontier | Nismo Off-Road |
| 2009-2021 | Nissan | Frontier | PRO-4X |
| 2011-2021 | Nissan | Frontier | S |
| 2005-2010 | Nissan | Frontier | SE |
| 2011-2019 | Nissan | Frontier | SL |
| 2011-2021 | Nissan | Frontier | SV |
| 2005-2010 | Nissan | Frontier | XE |
$117.88
All in one leaf spring bushing service kit covering front and rear eyes of the leaf plus shackle bushings. High kilometres and heavy load carrying causes excessive wear on rubber bushings. Whiteline's signature black bushings are made tough and offer outstanding abrasion resistance, high load bearing capability (4WD's, utes and towing), flexibility, increased tensile strength and chemical resistance to oil, grease, ozone and weathering.
Installation Instructions- Whiteline formulation technology boasts resistance to oil, grease, ozone and weathering.
- Hand-picked bushings and/or alignment, geometry products best suiting your vehicle.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2002-2004 | Chevrolet | Avalanche 2500 | Base |
| 2005-2006 | Chevrolet | Avalanche 2500 | LS |
| 2005-2006 | Chevrolet | Avalanche 2500 | LT |
| 1999-2005 | Chevrolet | Silverado 1500 | Base |
| 2016-2018 | Chevrolet | Silverado 1500 | Custom |
| 2014-2018 | Chevrolet | Silverado 1500 | High Country |
| 2004-2006,2009-2013 | Chevrolet | Silverado 1500 | Hybrid |
| 1999-2013,2015-2018 | Chevrolet | Silverado 1500 | LS |
| 1999-2018 | Chevrolet | Silverado 1500 | LT |
| 2007-2018 | Chevrolet | Silverado 1500 | LTZ |
| 2003-2006 | Chevrolet | Silverado 1500 | SS |
| 2015-2018 | Chevrolet | Silverado 1500 | SSV |
| 2002-2018 | Chevrolet | Silverado 1500 | WT |
| 2010-2013 | Chevrolet | Silverado 1500 | XFE |
| 2004-2005 | Chevrolet | Silverado 1500 | Z71 Off-Road |
| 2001-2003 | Chevrolet | Silverado 1500 HD | LS |
| 2001-2003 | Chevrolet | Silverado 1500 HD | LT |
| 2002-2004 | Chevrolet | Silverado 2500 | Base |
| 2002-2004 | Chevrolet | Silverado 2500 | LS |
| 2002-2004 | Chevrolet | Silverado 2500 | LT |
| 2004 | Chevrolet | Silverado 2500 | WT |
| 2001-2005 | Chevrolet | Silverado 2500 HD | Base |
| 2001-2006 | Chevrolet | Silverado 2500 HD | LS |
| 2001-2010 | Chevrolet | Silverado 2500 HD | LT |
| 2007-2010 | Chevrolet | Silverado 2500 HD | LTZ |
| 2003-2010 | Chevrolet | Silverado 2500 HD | WT |
| 2007-2010 | Chevrolet | Silverado 3500 HD | LT |
| 2007-2010 | Chevrolet | Silverado 3500 HD | LTZ |
| 2007-2010 | Chevrolet | Silverado 3500 HD | WT |
| 2002-2005,2014-2018 | GMC | Sierra 1500 | Base |
| 2001 | GMC | Sierra 1500 | C3 |
| 2002-2018 | GMC | Sierra 1500 | Denali |
| 2002 | GMC | Sierra 1500 | HT |
| 2005-2006,2009-2013 | GMC | Sierra 1500 | Hybrid |
| 1999-2003,2006-2013 | GMC | Sierra 1500 | SL |
| 1999-2018 | GMC | Sierra 1500 | SLE |
| 1999-2018 | GMC | Sierra 1500 | SLT |
| 2002-2013 | GMC | Sierra 1500 | WT |
| 2010-2013 | GMC | Sierra 1500 | XFE |
| 2001-2003 | GMC | Sierra 1500 HD | SLE |
| 2001-2003 | GMC | Sierra 1500 HD | SLT |
| 2002-2004 | GMC | Sierra 2500 | Base |
| 2002 | GMC | Sierra 2500 | SL |
| 2002-2004 | GMC | Sierra 2500 | SLE |
| 2002-2004 | GMC | Sierra 2500 | SLT |
| 2003-2004 | GMC | Sierra 2500 | WT |
| 2002-2005 | GMC | Sierra 2500 HD | Base |
| 2001-2002,2006 | GMC | Sierra 2500 HD | SL |
| 2001-2010 | GMC | Sierra 2500 HD | SLE |
| 2001-2010 | GMC | Sierra 2500 HD | SLT |
| 2003-2010 | GMC | Sierra 2500 HD | WT |
| 2007-2010 | GMC | Sierra 3500 HD | SLE |
| 2007-2010 | GMC | Sierra 3500 HD | SLT |
| 2007-2010 | GMC | Sierra 3500 HD | WT |
$89.88
A critical service item for any leaf sprung vehicle. High kilometers and heavy load carrying causes excessive wear on rubber bushings. Whiteline's signature red bushings are made tough and offer outstanding abrasion resistance, high load bearing capability (4WD?s, utes and towing), flexibility, increased tensile strength and chemical resistance to oil, grease, ozone and weathering.
Installation Instructions- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1983-1986,1997 | Ford | F-250 | Base |
| 1980-1982,1987-1992 | Ford | F-250 | Custom |
| 1995-1996 | Ford | F-250 | Eddie Bauer |
| 1997 | Ford | F-250 | Lariat |
| 1980-1981 | Ford | F-250 | Ranger |
| 1980-1981 | Ford | F-250 | Ranger Lariat |
| 1980-1981 | Ford | F-250 | Ranger XLT |
| 1995-1996 | Ford | F-250 | Special |
| 1982-1997 | Ford | F-250 | XL |
| 1982-1983 | Ford | F-250 | XLS |
| 1983-1984,1993-1997 | Ford | F-250 | XLT |
| 1982,1985-1992 | Ford | F-250 | XLT Lariat |
| 1983-1986,1997 | Ford | F-350 | Base |
| 1980-1982,1987-1992 | Ford | F-350 | Custom |
| 1995 | Ford | F-350 | Eddie Bauer |
| 1980-1981 | Ford | F-350 | Ranger |
| 1980-1981 | Ford | F-350 | Ranger Lariat |
| 1980-1981 | Ford | F-350 | Ranger XLT |
| 1995-1996 | Ford | F-350 | Special |
| 1982-1997 | Ford | F-350 | XL |
| 1982-1983 | Ford | F-350 | XLS |
| 1983-1984,1993-1997 | Ford | F-350 | XLT |
| 1982,1985-1992 | Ford | F-350 | XLT Lariat |
$39.88
All in one leaf spring bushing service kit covering front and rear eyes of the leaf plus shackle bushings. High kilometres and heavy load carrying causes excessive wear on rubber bushings. Whiteline's signature black bushings are made tough and offer outstanding abrasion resistance, high load bearing capability (4WD's, utes and towing), flexibility, increased tensile strength and chemical resistance to oil, grease, ozone and weathering.
Installation Instructions- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1989 | Suzuki | Samurai | Base |
| 1986-1988,1991-1993 | Suzuki | Samurai | JA |
| 1990-1995 | Suzuki | Samurai | JL |
| 1991 | Suzuki | Samurai | JS |
| 1986-1988 | Suzuki | Samurai | JX |
| 1986-1987 | Suzuki | Samurai | JX SE |
$52.88
Optimise rear suspension geometry with Whiteline suspension bushings. Often overlooked, Whiteline trailing arm bushings offer superior dynamic alignment precision by controlling excessive movement - providing driver reassurance for more predictable handling.
Installation InstructionsInstallation Instructions
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- The latest in material formulation technology boasts resistance to oil, grease, ozone and weathering.
- Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
- Internal grease reservoirs provide continual self-lubrication for optimum friction management.
- Install guide included providing detailed instructions on how to install your new purchase .
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
- Precisely placed dampening voids further reduces harshness from sudden road inputs.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2013-2016 | Scion | FR-S | Base |
| 2013-2020,2022-2025 | Subaru | BRZ | Limited |
| 2013-2019,2022-2025 | Subaru | BRZ | Premium |
| 2015 | Subaru | BRZ | Series.Blue |
| 2019 | Subaru | BRZ | Series.Gray |
| 2016 | Subaru | BRZ | Series.HyperBlue |
| 2017 | Subaru | BRZ | Series.Yellow |
| 2018,2020,2024-2025 | Subaru | BRZ | TS |
| 2014-2018 | Subaru | Forester | 2.0XT Premium |
| 2014-2018 | Subaru | Forester | 2.0XT Touring |
| 2014-2018 | Subaru | Forester | 2.5i |
| 2014-2018 | Subaru | Forester | 2.5i Limited |
| 2014-2018 | Subaru | Forester | 2.5i Premium |
| 2014-2018 | Subaru | Forester | 2.5i Touring |
| 2009-2013 | Subaru | Forester | X |
| 2009-2013 | Subaru | Forester | X Limited |
| 2009-2013 | Subaru | Forester | X Premium |
| 2011-2013 | Subaru | Forester | X Touring |
| 2009 | Subaru | Forester | XT |
| 2009-2010 | Subaru | Forester | XT Limited |
| 2010-2013 | Subaru | Forester | XT Premium |
| 2011-2013 | Subaru | Forester | XT Touring |
| 2015-2019 | Subaru | Legacy | 2.5i |
| 2015-2019 | Subaru | Legacy | 2.5i Limited |
| 2015-2019 | Subaru | Legacy | 2.5i Premium |
| 2017-2019 | Subaru | Legacy | 2.5i Sport |
| 2015-2019 | Subaru | Legacy | 3.6R Limited |
| 2015-2019 | Subaru | Outback | 2.5i |
| 2015-2019 | Subaru | Outback | 2.5i Limited |
| 2015-2019 | Subaru | Outback | 2.5i Premium |
| 2017-2019 | Subaru | Outback | 2.5i Touring |
| 2015-2019 | Subaru | Outback | 3.6R Limited |
| 2017-2019 | Subaru | Outback | 3.6R Touring |
| 2015-2024 | Subaru | WRX | Base |
| 2022-2025 | Subaru | WRX | GT |
| 2015-2025 | Subaru | WRX | Limited |
| 2015-2025 | Subaru | WRX | Premium |
| 2015-2021 | Subaru | WRX STI | Base |
| 2015 | Subaru | WRX STI | Launch Edition |
| 2015-2021 | Subaru | WRX STI | Limited |
| 2016 | Subaru | WRX STI | Series.HyperBlue |
| 2018 | Subaru | WRX STI | Type RA |
| 2017-2020 | Toyota | 86 | Base |
| 2018-2020 | Toyota | 86 | GT |
| 2020 | Toyota | 86 | Hakone Edition |
| 2017 | Toyota | 86 | Special Edition |
| 2019 | Toyota | 86 | TRD Special Edition |
| 2023 | Toyota | GR86 | 10th Anniversary Special Edition |
| 2022-2026 | Toyota | GR86 | Base |
| 2025 | Toyota | GR86 | Hakone Edition |
| 2022-2026 | Toyota | GR86 | Premium |
| 2024 | Toyota | GR86 | TRUENO Edition |
| 2026 | Toyota | GR86 | Yuzu Edition |
$65.88
Worn front control arm bushings have a huge influence on vehicle stability, steering precision and braking efficiency. Replace worn bushings to as new condition utilising Whiteline's advanced synthetic elastomer bushings with core characteristics ensuring superior elasticity, memory and outright durability for all forms of driving applications.
Installation Instructions- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Whiteline's latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
- Specially bonded design for optimised strength typically required in high load bearing applications.
- Internal grease reservoirs provide continual self lubrication for optimum friction management.
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1991-1993,1995-1998 | Nissan | 240SX | Base |
| 1991-1992,1997-1998 | Nissan | 240SX | LE |
| 1989-1998 | Nissan | 240SX | SE |
| 1989-1990 | Nissan | 240SX | XE |
| 1984 | Nissan | 300ZX | 2+2 |
| 1984 | Nissan | 300ZX | Base |
| 1984 | Nissan | 300ZX | Turbo |
$37.88
Worn or deteriorated link bushings although small can have considerable influence over sway bar performance and more notably vehicle handling behaviour. Whiteline formulation bushings are engineered to last and deliver improved driving performance.
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1965-1974,1977-1982 | Chevrolet | Corvette | Base |
| 1982 | Chevrolet | Corvette | Collector's Edition |
| 1978 | Chevrolet | Corvette | Indianapolis 500 Pace Car |
| 1978 | Chevrolet | Corvette | Silver Anniversary Edition |
| 1975-1976 | Chevrolet | Corvette | Stingray |
$132.88
Knock, knock, knock! That's the sound you hear when your sway bar links are not doing their job. Links are a common service item due to either worn or over compliant bushings/ joints and possibly bent or snapped centre bodies. Upgrade from the old units to Whiteline sway bar links with superior features that outlast and outperform the original equipment.
- Durable construction supports long-term driving performance on varied road conditions
- Helps reduce body roll for a more stable and confident cornering experience
- Built to enhance handling performance by distributing load more effectively
- Kit Contains 2 Sway Bar Links
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2005-2007,2011-2014 | Chrysler | 300 | Base |
| 2005-2020 | Chrysler | 300 | C |
| 2012-2014 | Chrysler | 300 | C Luxury |
| 2015-2017 | Chrysler | 300 | C Platinum |
| 2005-2010 | Chrysler | 300 | C SRT8 |
| 2005-2012,2015-2020 | Chrysler | 300 | Limited |
| 2008-2009 | Chrysler | 300 | LX |
| 2010,2012-2023 | Chrysler | 300 | S |
| 2009 | Chrysler | 300 | Signature Series |
| 2012-2014 | Chrysler | 300 | SRT8 |
| 2013 | Chrysler | 300 | SRT8 Core |
| 2005-2010,2018-2023 | Chrysler | 300 | Touring |
| 2018-2023 | Chrysler | 300 | Touring L |
| 2016 | Dodge | Challenger | 392 Hemi Scat Pack Shaker |
| 2017-2023 | Dodge | Challenger | GT |
| 2009-2023 | Dodge | Challenger | R/T |
| 2017-2019 | Dodge | Challenger | R/T 392 |
| 2012 | Dodge | Challenger | R/T Classic |
| 2015-2016 | Dodge | Challenger | R/T Plus |
| 2016 | Dodge | Challenger | R/T Plus Shaker |
| 2016-2023 | Dodge | Challenger | R/T Scat Pack |
| 2021 | Dodge | Challenger | R/T Scat Pack Shaker Widebody |
| 2019-2023 | Dodge | Challenger | R/T Scat Pack Widebody |
| 2016 | Dodge | Challenger | R/T Shaker |
| 2014 | Dodge | Challenger | Rallye Redline |
| 2015 | Dodge | Challenger | Scat Pack |
| 2009-2011 | Dodge | Challenger | SE |
| 2015-2018 | Dodge | Challenger | SRT 392 |
| 2018 | Dodge | Challenger | SRT Demon |
| 2015-2022 | Dodge | Challenger | SRT Hellcat |
| 2019-2022 | Dodge | Challenger | SRT Hellcat Redeye |
| 2019-2022 | Dodge | Challenger | SRT Hellcat Redeye Widebody |
| 2018-2022 | Dodge | Challenger | SRT Hellcat Widebody |
| 2020-2023 | Dodge | Challenger | SRT Super Stock |
| 2008-2014 | Dodge | Challenger | SRT8 |
| 2012-2023 | Dodge | Challenger | SXT |
| 2012,2015-2018 | Dodge | Challenger | SXT Plus |
| 2017-2018 | Dodge | Challenger | T/A |
| 2017-2018 | Dodge | Challenger | T/A 392 |
| 2021 | Dodge | Challenger | T/A 392 Widebody |
| 2006-2007 | Dodge | Charger | Base |
| 2017-2018 | Dodge | Charger | Daytona |
| 2017-2018 | Dodge | Charger | Daytona 392 |
| 2006 | Dodge | Charger | Daytona R/T |
| 2018-2023 | Dodge | Charger | GT |
| 2018 | Dodge | Charger | GT Plus |
| 2006-2023 | Dodge | Charger | Pursuit |
| 2006-2023 | Dodge | Charger | R/T |
| 2017-2018 | Dodge | Charger | R/T 392 |
| 2015-2016 | Dodge | Charger | R/T Road & Track |
| 2015-2018 | Dodge | Charger | R/T Scat Pack |
| 2019-2023 | Dodge | Charger | Scat Pack |
| 2020 | Dodge | Charger | Scat Pack 392 Widebody |
| 2006-2017 | Dodge | Charger | SE |
| 2015-2018 | Dodge | Charger | SRT 392 |
| 2015-2020 | Dodge | Charger | SRT Hellcat |
| 2021-2023 | Dodge | Charger | SRT Hellcat Redeye Widebody |
| 2020-2023 | Dodge | Charger | SRT Hellcat Widebody |
| 2006-2010,2012-2014 | Dodge | Charger | SRT8 |
| 2006-2010,2012-2023 | Dodge | Charger | SXT |
| 2012,2018 | Dodge | Charger | SXT Plus |
| 2018 | Dodge | Charger | SXT Plus Leather |
| 2005-2008 | Dodge | Magnum | R/T |
| 2005-2008 | Dodge | Magnum | SE |
| 2006-2008 | Dodge | Magnum | SRT8 |
| 2005-2008 | Dodge | Magnum | SXT |
| 2005 | Dodge | Magnum | SXT Special Edition |
$28.88
Whiteline sway bar mount bushings not only boasts the latest synthetic elastomer bushing material technology but a high performing PTFE inner lining boasting an extraordinary low coefficient of friction. This inner lining eliminates the need to lubricate the bushing on installation and therefore makes these bushing 'grease free'.
- Whiteline's latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
- Internal grease reservoirs provide continual self-lubrication for optimum friction management.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2006 | Saab | 9-2X | 2.5i |
| 2005-2006 | Saab | 9-2X | Aero |
| 2005 | Saab | 9-2X | Linear |
| 2004-2006 | Subaru | Baja | Sport |
| 2004-2006 | Subaru | Baja | Turbo |
| 2006-2007 | Subaru | Impreza | 2.5i |
| 2003-2004 | Subaru | Impreza | Outback |
| 2005-2007 | Subaru | Impreza | Outback Sport |
| 2003-2005 | Subaru | Impreza | RS |
| 2003-2004 | Subaru | Impreza | TS |
| 2003-2007 | Subaru | Impreza | WRX |
| 2006-2007 | Subaru | Impreza | WRX Limited |
| 2004-2007 | Subaru | Impreza | WRX STI |
| 2007 | Subaru | Impreza | WRX STI Limited |
| 2006-2007 | Subaru | Impreza | WRX TR |
| 2006-2009 | Subaru | Legacy | 2.5i |
| 2007-2009 | Subaru | Legacy | 2.5i Limited |
| 2007-2009 | Subaru | Legacy | 2.5i Special Edition |
| 2009 | Subaru | Legacy | 3.0 R |
| 2008-2009 | Subaru | Legacy | 3.0 R Limited |
| 2000 | Subaru | Legacy | Brighton |
| 2000-2006 | Subaru | Legacy | GT |
| 2000-2002,2005,2007-2009 | Subaru | Legacy | GT Limited |
| 2006-2009 | Subaru | Legacy | GT spec.B |
| 2005 | Subaru | Legacy | i |
| 2000-2004 | Subaru | Legacy | L |
| 2004 | Subaru | Legacy | L 35th Anniversary |
| 2003 | Subaru | Legacy | L SE |
| 2005 | Subaru | Legacy | Limited |
| 2006-2009 | Subaru | Outback | 2.5i |
| 2007 | Subaru | Outback | 2.5i Basic |
| 2008 | Subaru | Outback | 2.5i L.L. Bean Edition |
| 2006-2009 | Subaru | Outback | 2.5i Limited |
| 2008 | Subaru | Outback | 2.5i Limited L.L. Bean Edition |
| 2000-2004,2008 | Subaru | Outback | Base |
| 2002-2004 | Subaru | Outback | H6 |
| 2004 | Subaru | Outback | H6 35th Anniversary Edition |
| 2004 | Subaru | Outback | H6 VDC |
| 2005 | Subaru | Outback | i |
| 2001-2004 | Subaru | Outback | L.L. Bean |
| 2000-2005 | Subaru | Outback | Limited |
| 2005-2006 | Subaru | Outback | R |
| 2005-2008 | Subaru | Outback | R L.L. Bean Edition |
| 2006 | Subaru | Outback | R VDC Limited |
| 2001-2003 | Subaru | Outback | VDC |
| 2005 | Subaru | Outback | VDC Limited |
| 2005-2006 | Subaru | Outback | XT |
| 2005,2007-2008 | Subaru | Outback | XT Limited |
$308.88
Most would agree that the time and stress to remove and replace bushings and ball joints to suspension arms can be hard to justify. Making up press tools and damaging arms are just two of the problems one can endure. Why put yourself through it when you can purchase complete arms, fitted with market leading Whiteline synthetic elastomer bushings.
- Engineered for dependable performance across a wide range of conditions
- Durable materials support long-term use and consistent reliability
- Designed for straightforward installation and dependable fit
- Kit contains: 2 Arms
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2006-2011 | Honda | Civic | DX |
| 2006-2011 | Honda | Civic | EX |
| 2009-2011 | Honda | Civic | EX-L |
| 2006-2011 | Honda | Civic | GX |
| 2006-2011 | Honda | Civic | Hybrid |
| 2009-2011 | Honda | Civic | Hybrid-L |
| 2006-2011 | Honda | Civic | LX |
| 2009-2011 | Honda | Civic | LX-S |
| 2008 | Honda | Civic | MUGEN Si |
| 2006-2011 | Honda | Civic | Si |
$358.88
Heavy duty control arms provides on car adjustability of camber alignment. This results in improved traction, increased cornering grip and better tyre life - ultimately improving overall performance.
- Kit contains 2 Arms
- On-car adjustable
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2021-2025 | Lexus | ES250 | Base |
| 2021-2023 | Lexus | ES250 | F Sport |
| 2023-2025 | Lexus | ES250 | F Sport Design |
| 2024-2025 | Lexus | ES250 | F Sport Handling |
| 2021-2025 | Lexus | ES250 | Luxury |
| 2021-2025 | Lexus | ES250 | Ultra Luxury |
| 2018-2025 | Lexus | ES300h | Base |
| 2022 | Lexus | ES300h | F Sport |
| 2023-2025 | Lexus | ES300h | F Sport Design |
| 2023-2025 | Lexus | ES300h | F Sport Handling |
| 2019-2025 | Lexus | ES300h | Luxury |
| 2019-2025 | Lexus | ES300h | Ultra Luxury |
| 2018-2025 | Lexus | ES350 | Base |
| 2019-2022 | Lexus | ES350 | F Sport |
| 2023-2025 | Lexus | ES350 | F Sport Design |
| 2023-2025 | Lexus | ES350 | F Sport Handling |
| 2019-2025 | Lexus | ES350 | Luxury |
| 2019-2025 | Lexus | ES350 | Ultra Luxury |
| 2022-2025 | Lexus | NX250 | Base |
| 2022-2025 | Lexus | NX350 | Base |
| 2022 | Lexus | NX350 | F Sport |
| 2023-2025 | Lexus | NX350 | F Sport Handling |
| 2022-2025 | Lexus | NX350h | Base |
| 2022-2025 | Lexus | NX450h+ | Base |
| 2022 | Lexus | NX450h+ | F Sport |
| 2023-2025 | Lexus | NX450h+ | F Sport Handling |
| 2019-2022 | Lexus | UX200 | Base |
| 2019-2022 | Lexus | UX200 | F Sport |
| 2019-2022 | Lexus | UX200 | Luxury |
| 2019-2024 | Lexus | UX250h | Base |
| 2019-2022 | Lexus | UX250h | F Sport |
| 2023-2024 | Lexus | UX250h | F Sport Design |
| 2023-2024 | Lexus | UX250h | F Sport Handling |
| 2019,2021-2022 | Lexus | UX250h | Luxury |
| 2023-2024 | Lexus | UX250h | Premium |
| 2025-2026 | Lexus | UX300h | Base |
| 2025-2026 | Lexus | UX300h | F Sport Design |
| 2025-2026 | Lexus | UX300h | F Sport Handling |
| 2025-2026 | Lexus | UX300h | Premium |
| 2019-2022 | Toyota | C-HR | LE |
| 2019-2022 | Toyota | C-HR | Limited |
| 2021-2022 | Toyota | C-HR | Nightshade |
| 2026 | Toyota | C-HR | SE |
| 2018-2022 | Toyota | C-HR | XLE |
| 2018 | Toyota | C-HR | XLE Premium |
| 2026 | Toyota | C-HR | XSE |
| 2025-2026 | Toyota | Corolla | FX |
| 2020-2026 | Toyota | Corolla | Hybrid LE |
| 2024 | Toyota | Corolla | Hybrid Nightshade |
| 2023-2026 | Toyota | Corolla | Hybrid SE |
| 2023-2026 | Toyota | Corolla | Hybrid XLE |
| 2018-2022 | Toyota | Corolla | L |
| 2018-2026 | Toyota | Corolla | LE |
| 2018-2019 | Toyota | Corolla | LE Eco |
| 2024-2025 | Toyota | Corolla | Nightshade |
| 2018-2026 | Toyota | Corolla | SE |
| 2021-2022 | Toyota | Corolla | SE Apex |
| 2020-2022 | Toyota | Corolla | SE Nightshade |
| 2018-2022 | Toyota | Corolla | XLE |
| 2018-2026 | Toyota | Corolla | XSE |
| 2021-2022 | Toyota | Corolla | XSE Apex |
| 2023-2024 | Toyota | GR Corolla | Circuit Edition |
| 2023-2026 | Toyota | GR Corolla | Core |
| 2023 | Toyota | GR Corolla | Morizo Edition |
| 2024-2026 | Toyota | GR Corolla | Premium |
| 2025-2026 | Toyota | GR Corolla | Premium Plus |
| 2021 | Toyota | Prius | 2020 Edition |
| 2015 | Toyota | Prius | Five |
| 2015-2018 | Toyota | Prius | Four |
| 2016-2018 | Toyota | Prius | Four Touring |
| 2019-2022 | Toyota | Prius | L Eco |
| 2019-2026 | Toyota | Prius | LE |
| 2019-2026 | Toyota | Prius | Limited |
| 2025-2026 | Toyota | Prius | Nightshade |
| 2015,2017-2018 | Toyota | Prius | One |
| 2015 | Toyota | Prius | Persona Series |
| 2026 | Toyota | Prius | Plug-In Hybrid Limited |
| 2026 | Toyota | Prius | Plug-In Hybrid Nightshade |
| 2025-2026 | Toyota | Prius | Plug-In Hybrid SE |
| 2025-2026 | Toyota | Prius | Plug-In Hybrid XSE |
| 2025-2026 | Toyota | Prius | Plug-In Hybrid XSE Premium |
| 2015-2018 | Toyota | Prius | Three |
| 2016-2018 | Toyota | Prius | Three Touring |
| 2015-2018 | Toyota | Prius | Two |
| 2016-2018 | Toyota | Prius | Two Eco |
| 2019-2026 | Toyota | Prius | XLE |
| 2019-2024 | Toyota | RAV4 | Adventure |
| 2019-2026 | Toyota | RAV4 | Hybrid LE |
| 2019-2026 | Toyota | RAV4 | Hybrid Limited |
| 2022-2026 | Toyota | RAV4 | Hybrid SE |
| 2023-2026 | Toyota | RAV4 | Hybrid Woodland Edition |
| 2019-2025 | Toyota | RAV4 | Hybrid XLE |
| 2021-2026 | Toyota | RAV4 | Hybrid XLE Premium |
| 2019-2026 | Toyota | RAV4 | Hybrid XSE |
| 2019-2025 | Toyota | RAV4 | LE |
| 2019-2025 | Toyota | RAV4 | Limited |
| 2026 | Toyota | RAV4 | Plug-In Hybrid GR Sport |
| 2025-2026 | Toyota | RAV4 | Plug-In Hybrid SE |
| 2026 | Toyota | RAV4 | Plug-In Hybrid Woodland Edition |
| 2025-2026 | Toyota | RAV4 | Plug-In Hybrid XSE |
| 2020-2024 | Toyota | RAV4 | TRD Off-Road |
| 2019-2025 | Toyota | RAV4 | XLE |
| 2019-2025 | Toyota | RAV4 | XLE Premium |
| 2021-2024 | Toyota | RAV4 Prime | SE |
| 2021-2024 | Toyota | RAV4 Prime | XSE |
| 2020 | Toyota | Yaris | L |
| 2020 | Toyota | Yaris | LE |
| 2020 | Toyota | Yaris | XLE |
Showing 720/13097
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.