Engineered to "Activate More Grip", sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tires thereby increasing cornering grip and improving outright performance. This Whiteline 22mm sway bar = more grip = better handling = outright performance - it's the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tire wear without affecting ride quality or comfort.

• Engineered for dependable performance across a wide range of conditions
• Durable materials support long-term use and consistent reliability
• Designed for straightforward installation and dependable fit

This Part Fits:

Bilstein B12 (Special) suspension kits are designed to alter the vehicles ride height for optimum performance. Utilizing various different technologies to achieve the optimum ride height for a specific requirement. Bilstein B12 (Special) suspension kits provide the perfect combination of suspension dynamics, quality and aesthetics.

• Utilizing various different technologies to achieve the optimum ride height for a specific requirement
• Provide the perfect combination of suspension dynamics, quality and aesthetics
• Designed to alter the vehicles ride height for optimum performance

This Part Fits:

Bilstein B16 (DampTronic) suspension kits feature ride height adjustability with dampers compatible with OE electronic damping systems. All of the active features of the factory electronic suspension, along with the factory controls, will be retained with the installation of this kit. These kits offer monotube performance dampers with matched springs that are tuned for each specific application. The zinc coated and threaded body design will give you the flexibility to find the perfect ride height setting for your intended use while providing unsurpassed protection against the harshest road elements. B16 (DampTronic) suspension kits are made in Germany and feature technology tested on the famed Nürburgring.

• Threaded body allows lowering of approximately 30mm to 50mm
• Tested by our engineers under motorsport conditions
• Triple-C Coating Provides Resistance To Corrosion
• Quick and easy damping level adjustment

This Part Fits:

Bilstein EVO Series coilovers are the next step in the evolution of performance suspension tuning. EVO T1 is a coilover kit built and tuned specifically for everyday street use and occasional track duty. Featuring ride height adjustability and manually adjustable performance dampers. The 10-stage damping system adjusts both rebound and compression to provide the best handling performance for both street and track conditions. Redesigned threaded bodied dampers allow for extreme lowering of up to 70mm. High quality components provide consistent performance for every adjustment. Greater stability, traction and higher cornering speeds are achieved through specific application tuning. Bilstein EVO Series suspension kits are designed and built in Germany with technology tested and tuned on the Nürburgring.

• Easy handling, twice as effective: Dual-Click adjustment sets rebound and bump at the same time on an aluminum dial with 10 distinctive clicks
• Lowered ride height by up to 70mm: flexibly and individually – with threads to spare and a technical certification
• Damper settings for very sporty handling in any situation on the road or track

This Part Fits:

Bilstein B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 2.65-in OD body and 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.

• Large 60mm body for increased oil capacity, cooling, and long-term durability
• 60mm digressive piston improves ride comfort and control over rough terrain
• Vehicle specific tuning

This Part Fits:

Bilstein B14 (PSS) suspension kits feature ride height adjustability in an OE quality, direct fit package. These kits offer monotube performance dampers with matched springs that are tuned for each specific application. The zinc coated and threaded body design will give you the flexibility to find the perfect ride height setting for your intended use while providing unsurpassed protection against the harshest road elements. B14 (PSS) suspension kits are made in Germany and feature technology tested on the famed Nürburgring.

• Triple-C-Technology surface coating for long lasting corrosion resistance
• Threaded body allows lowering of approximately 30mm to 50mm
• Tested by our engineers under motorsport conditions
• Monotube Gas Pressure Construction

This Part Fits:

Bilstein B8 8112 (ZoneControl CR) is a direct fit, 2.65-in body position sensitive coilover shock designed for light trucks and SUV’s. ZoneControl CR is a revolutionary technology delivering position sensitive damping. The system incorporates a triple piston design, offering 3 stages of compression valving and 2 stages of rebound valving. The coilover module utilizes a threaded spring seat for ride height adjustability ranging from 0-3.8” (depending on application). The coilover is supplied with a remote reservoir for increased cooling and an accompanied, bolt-on anodized reservoir chassis mount. BILSTEIN B8 8112 (ZoneControl) CR position sensitive coilovers will offer unparalleled ride comfort during every day driving combined with maximum control over large suspension inputs.

• ZoneControl® CR: Position sensitive damping with 3 compression zones and 2 rebound zones, controlled by 3 independent pistons
• Triple piston design delivers comfort during every day driving conditions and maximum control under large suspension inputs
• 60mm remote reservoir for increased oil capacity and cooling

This Part Fits:

Bilstein B8 Performance Plus dampers are a performance upgrade to OE dampers designed to be paired with aftermarket lowering springs. These dampers offer application specific valve settings with a monotube design to bring out the best handling performance of a vehicle. Each damper is rigorously tested for quality that meets or exceeds OE standards. B8 Performance Plus dampers are the ideal solution for pairing with a lowering spring for improved handling and sportier look with the added benefit of world-famous Bilstein quality.

• For use with lowering spring sets and production sport suspensions
• Enhanced safety and performance with lowering spring change
• Sporty feel while maintaining comfort
• Vehicle Specific Ride Tuning

This Part Fits:

Bilstein B6 Performance dampers are a performance upgrade to OE dampers designed to be paired with the OE factory spring. These dampers offer application specific valve settings with a monotube design to bring out the best handling performance of a vehicle. Each damper is rigorously tested for quality that meets or exceeds OE standards. B6 Performance dampers will provide improved safety and handling performance with the added benefit of world-famous Bilstein quality.

• Improved safety and performance without the requirement of new springs (use of series spring possible)
• Optimum grip and enhanced lane stability in day to day and extreme situations
• Bilstein gas-pressure technology
• Vehicle Specific Ride Tuning

This Part Fits:

Bilstein B6 Performance dampers are a performance upgrade to OE dampers designed to be paired with the OE factory spring. These dampers offer application specific valve settings with a monotube design to bring out the best handling performance of a vehicle. Each damper is rigorously tested for quality that meets or exceeds OE standards. B6 Performance dampers will provide improved safety and handling performance with the added benefit of world-famous Bilstein quality.

• Improved safety and performance without the requirement of new springs (use of series spring possible)
• Optimum grip and enhanced lane stability in day to day and extreme situations
• Bilstein gas-pressure technology
• Vehicle Specific Ride Tuning

This Part Fits:

Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.

• 46mm monotube design ensures consistent, fade-free performance in all conditions
• Patented digressive valving instantly reacts to changing surface conditions
• Vehicle specific tuning

This Part Fits:

Bilstein B8 5100 (Steering Damper) is designed as an upgrade to factory steering dampers on trucks and SUVs. Utilizing our proven design, these steering dampers are able to dampen minute movements in the steering and reduce steering vibrations that naturally occur, especially in older vehicles. These steering dampers are zinc coated for resistance to harsh elements and match to all B8 5100 series products. B8 5100 (Steering Damper) will offer a significant improvement in steering, handling and comfort.

• Maintains complete command of your truck, van or SUV at all times
• Allows the ability to dampen minute movements in the steering
• Reduces steering vibrations

This Part Fits:

Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.

• 46mm monotube design ensures consistent, fade-free performance in all conditions
• Patented digressive valving instantly reacts to changing surface conditions
• Vehicle specific tuning
• Made In The USA

This Part Fits:

Bilstein B8 5125 shock absorbers are designed for custom applications and are a perfect solution for vehicles that do not have a direct Bilstein fitment. These high gas pressure monotube shock absorbers are sold by various lengths and valve rates to accommodate a wide range of uses and custom fitments. All B8 5125 shock absorbers come equipped with industry standard 5/8 inch hour glass bushings and are available in either an eye/eye or stem/eye mount configuration. The shock absorbers feature a 46mm piston with self-adjusting deflective disc valving. Bilstein B8 5125 shock absorbers are the ideal choice for custom suspension builders.

• 46mm monotube design ensures consistent, fade-free performance in all conditions
• Patented digressive valving instantly reacts to changing surface conditions
• 46mm Digressive Piston w/Self-Adjusting Deflective Disc Valving
• Vehicle specific tuning

Bilstein B8 5100 (Steering Damper) is designed as an upgrade to factory steering dampers on trucks and SUVs. Utilizing our proven design, these steering dampers are able to dampen minute movements in the steering and reduce steering vibrations that naturally occur, especially in older vehicles. These steering dampers are zinc coated for resistance to harsh elements and match to all B8 5100 series products. B8 5100 (Steering Damper) will offer a significant improvement in steering, handling and comfort.

• Maintains complete command of your truck, van or SUV at all times
• Allows the ability to dampen minute movements in the steering
• Reduces steering vibrations
• Zinc-Plated Steel Body

This Part Fits:

Bilstein B8 8100 reservoir shock absorbers are a large bore 2.65-in OD direct fit solution for lifted trucks and SUVs. Constructed from aerospace quality billet components, the large 2.65-in OD shock body shock body offers a higher oil volume capacity to control heat while tackling rough road surfaces over long distances. Each B8 8100 offers a unique remote or piggyback reservoir solution for an easy, hassle free installation. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. The large 60mm piston design offers more comfort and control in all driving conditions. The Bilstein B8 8100 will allow you to tame the terrain in comfort.

• 60mm large bore digressive piston offers a greater range of tunability and delivers exceptional comfort without sacrificing control
• 60mm remote reservoir offers increased oil capacity for consistent performance over rough terrain
• Direct fit for an easy installation

This Part Fits:

Bilstein B8 5165 remote reservoir shock absorbers are designed to be used on custom off-road vehicles in order to achieve the desired ride of your light truck or SUV. These high gas pressure monotube shock absorbers are sold by various lengths and valve rates to accommodate a wide range of uses and custom applications. All B8 5165 shock absorbers come equipped with 5/8 inch eyelets with hour glass bushings on both ends. The remote reservoir will offer increased cooling capacity and wheel travel to optimize overall performance compared to a traditional shock absorber. Each shock absorber is fitted with a unique 360 degree swivel banjo hose fitting, providing a clean, low profile installation. B8 5165 remote reservoir shock absorbers will increase overall durability of your custom vehicle allowing you to conquer the harshest of off-road environments.

• Self-adjusting deflective disc valving reacts immediately to surface changes enabling maximum vehicle control
• 46mm monotube design ensures consistent, fade-free performance in all conditions
• Remote reservoir increases shock oil capacity for greater heat dissipation

Bilstein B8 5160 remote reservoir shock absorbers are designed as a direct fit solution for lifted trucks and SUVs. The remote reservoir will offer increased cooling capacity and wheel travel to optimize overall performance compared to a traditional shock absorber. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. Each shock absorber is fitted with a unique 360 degree swivel banjo hose fitting and an attractive billet reservoir mount where applicable providing a clean, low profile installation. B8 5160 remote reservoir shock absorbers will increase overall durability of your vehicle allowing you to conquer the harshest of off-road environments.

• Self-adjusting deflective disc valving reacts immediately to surface changes enabling maximum vehicle control
• 46mm monotube design ensures consistent, fade-free performance in all conditions
• Remote reservoir increases shock oil capacity for greater heat dissipation

This Part Fits:

Bilstein B8 5160 remote reservoir shock absorbers are designed as a direct fit solution for lifted trucks and SUVs. The remote reservoir will offer increased cooling capacity and wheel travel to optimize overall performance compared to a traditional shock absorber. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. Each shock absorber is fitted with a unique 360 degree swivel banjo hose fitting and an attractive billet reservoir mount where applicable providing a clean, low profile installation. B8 5160 remote reservoir shock absorbers will increase overall durability of your vehicle allowing you to conquer the harshest of off-road environments.

• Self-adjusting deflective disc valving reacts immediately to surface changes enabling maximum vehicle control
• 46mm monotube design ensures consistent, fade-free performance in all conditions
• Remote reservoir increases shock oil capacity for greater heat dissipation

This Part Fits:

Bilstein B8 8100 reservoir shock absorbers are a large bore 2.65-in OD direct fit solution for lifted trucks and SUVs. Constructed from aerospace quality billet components, the large 2.65-in OD shock body shock body offers a higher oil volume capacity to control heat while tackling rough road surfaces over long distances. Each B8 8100 offers a unique remote or piggyback reservoir solution for an easy, hassle free installation. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. The large 60mm piston design offers more comfort and control in all driving conditions. The Bilstein B8 8100 will allow you to tame the terrain in comfort.

• 60mm large bore digressive piston offers a greater range of tunability and delivers exceptional comfort without sacrificing control
• 60mm remote reservoir offers increased oil capacity for consistent performance over rough terrain
• Direct fit for an easy installation

This Part Fits:

Bilstein B6 4600 shock absorbers are designed as a direct fit upgrade to OE shock absorbers on stock height light trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B6 4600 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B6 4600 shock absorbers are tuned for each specific application to ensure optimal performance is achieved. B6 4600 shock absorbers offer a significant improvement in ride quality, handling, and comfort.

• 46mm monotube design ensures consistent, fade-free performance in all conditions
• Specific tuning for stock height vehicles
• Uses OEM springs and mounting hardware

This Part Fits:

Bilstein B8 5100 (Ride Height Adjustable) shock absorbers are designed for trucks and SUVs with a front OE coilover style suspension. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-3 inches of front lift with OE springs (depending on application). The monotube shock absorbers feature a 46mm digressive piston a with self-adjusting deflective disc valve setting.  Bilstein B8 5100 (Ride Height Adjustable) shock absorbers provide increased wheel travel and improved handling. Utilizing a B8 5100 (Ride Height Adjustable) shock absorber is the easiest way to level out your vehicle.

• Practical alternative to coil spring spacers, with the benefit of Bilstein monotube technology
• 46mm monotube design ensures consistent, fade-free performance in all conditions
• Adjustable spring seat offers 0-2.75in of lift, depending on the application

This Part Fits:

Bilstein B6 Performance dampers are a performance upgrade to OE dampers designed to be paired with the OE factory spring. These dampers offer application specific valve settings with a monotube design to bring out the best handling performance of a vehicle. Each damper is rigorously tested for quality that meets or exceeds OE standards. B6 Performance dampers will provide improved safety and handling performance with the added benefit of world-famous Bilstein quality.

• Improved safety and performance without the requirement of new springs (use of series spring possible)
• Optimum grip and enhanced lane stability in day to day and extreme situations
• Bilstein gas-pressure technology

This Part Fits:

Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.

• 46mm monotube design ensures consistent, fade-free performance in all conditions
• Patented digressive valving instantly reacts to changing surface conditions
• Offer A Significant Improvement In Ride Quality/Handling/Comfort
• Vehicle specific tuning

This Part Fits:

Bilstein B6 shock absorbers and struts are the ideal choice for improving the performance of any vehicle. These shock absorbers and struts feature a monotube design which provides consistent fade free performance. Bilstein B6 shock absorbers and struts utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions to provide consistent fade free performance. All B6 shock absorbers and struts are tuned for each specific application to assure optimal performance is achieved. Bilstein B6 shock absorbers and struts offer a significant improvement in ride quality, handling, and comfort.

• 46mm monotube design ensures consistent, fade-free performance in all conditions
• Specific tuning for stock height vehicles
• Uses OEM springs and mounting hardware

This Part Fits:

Bilstein B6 4600 shock absorbers are designed as a direct fit upgrade to OE shock absorbers on stock height light trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B6 4600 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B6 4600 shock absorbers are tuned for each specific application to ensure optimal performance is achieved. B6 4600 shock absorbers offer a significant improvement in ride quality, handling, and comfort.

• 46mm monotube design ensures consistent, fade-free performance in all conditions
• Specific tuning for stock height vehicles
• Uses OEM springs and mounting hardware
• Vehicle Specific Ride Tuning

This Part Fits:

Bilstein B8 5100 (Ride Height Adjustable) shock absorbers are designed for trucks and SUVs with a front OE coilover style suspension. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift with OE springs (depending on application). The monotube shock absorbers feature a 46mm digressive piston a with self-adjusting deflective disc valve setting.  Bilstein B8 5100 (Ride Height Adjustable) shock absorbers provide increased wheel travel and improved handling. Utilizing a B8 5100 (Ride Height Adjustable) shock absorber is the easiest way to level out your vehicle.

• Practical alternative to coil spring spacers, with the benefit of Bilstein monotube technology
• 46mm monotube design ensures consistent, fade-free performance in all conditions
• Adjustable spring seat offers 0-2.75in of lift, depending on the application
• Vehicle Specific Ride Tuning

This Part Fits:

Bilstein B6 shock absorbers and struts are the ideal choice for improving the performance of any vehicle. These shock absorbers and struts feature a monotube design which provides consistent fade free performance. Bilstein B6 shock absorbers and struts utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions to provide consistent fade free performance. All B6 shock absorbers and struts are tuned for each specific application to assure optimal performance is achieved. Bilstein B6 shock absorbers and struts offer a significant improvement in ride quality, handling, and comfort.

• 46mm monotube design ensures consistent, fade-free performance in all conditions
• Offer A Significant Improvement In Ride Quality/Handling/Comfort
• Specific tuning for stock height vehicles
• Uses OEM springs and mounting hardware

This Part Fits:

Bilstein B6 shock absorbers and struts are the ideal choice for improving the performance of any vehicle. These shock absorbers and struts feature a monotube design which provides consistent fade free performance. Bilstein B6 shock absorbers and struts utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions to provide consistent fade free performance. All B6 shock absorbers and struts are tuned for each specific application to assure optimal performance is achieved. Bilstein B6 shock absorbers and struts offer a significant improvement in ride quality, handling, and comfort.

• 46mm monotube design ensures consistent, fade-free performance in all conditions
• Restore The Original Performance And Handling Of Their Vehicle
• Specific tuning for stock height vehicles
• Uses OEM springs and mounting hardware

This Part Fits:

Bilstein B8 Performance Plus dampers are a performance upgrade to OE dampers designed to be paired with aftermarket lowering springs. These dampers offer application specific valve settings with a monotube design to bring out the best handling performance of a vehicle. Each damper is rigorously tested for quality that meets or exceeds OE standards. B8 Performance Plus dampers are the ideal solution for pairing with a lowering spring for improved handling and sportier look with the added benefit of world-famous Bilstein quality.

• For use with lowering spring sets and production sport suspensions
• Enhanced safety and performance with lowering spring change
• Sporty feel while maintaining comfort
• Vehicle Specific Ride Tuning

This Part Fits: